Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Normal zone: 516000 pages, LIFO batch:63
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: PSCIv1.1 detected in firmware.
- [ 0.000000] psci: Using standard PSCI v0.2 function IDs
- [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
- [ 0.000000] psci: SMC Calling Convention v1.0
- [ 0.000000] psci: OSI mode supported.
- [ 0.000000] percpu: Embedded 23 pages/cpu s54360 r8192 d31656 u94208
- [ 0.000000] pcpu-alloc: s54360 r8192 d31656 u94208 alloc=23*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
- [ 0.000000] Detected VIPT I-cache on CPU0
- [ 0.000000] CPU features: detected: GIC system register CPU interface
- [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
- [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
- [ 0.000000] CPU features: detected: Hardware dirty bit management
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 957419
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: root=/dev/disk/by-partlabel/rootfs rw rootwait console=tty0 console=ttyMSM0,115200n8 loglevel=10 log_buf_len=4M clk_ignore_unused :
- [ 0.000000] printk: log_buf_len: 4194304 bytes
- [ 0.000000] printk: early log buf free: 127620(97%)
- [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] software IO TLB: mapped [mem 0xbbfff000-0xbffff000] (64MB)
- [ 0.000000] Memory: 3666492K/3890468K available (14908K kernel code, 2510K rwdata, 8448K rodata, 6272K init, 499K bss, 191208K reserved, 32768K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
- [ 0.000000] rcu: RCU event tracing is enabled.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=8.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
- [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
- [ 0.000000] GICv3: 768 SPIs implemented
- [ 0.000000] GICv3: 0 Extended SPIs implemented
- [ 0.000000] GICv3: Distributor has no Range Selector support
- [ 0.000000] GICv3: 16 PPIs implemented
- [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000
- [ 0.000000] ITS: No ITS available, not enabling LPIs
- [ 0.000000] random: get_random_bytes called from start_kernel+0x314/0x4e4 with crng_init=0
- [ 0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
- [ 0.000003] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
- [ 0.000355] Console: colour dummy device 80x25
- [ 0.000827] printk: console [tty0] enabled
- [ 0.000921] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
- [ 0.000939] pid_max: default: 32768 minimum: 301
- [ 0.001015] LSM: Security Framework initializing
- [ 0.001076] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.001095] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.002549] rcu: Hierarchical SRCU implementation.
- [ 0.008409] EFI services will not be available.
- [ 0.008679] smp: Bringing up secondary CPUs ...
- [ 0.010221] Detected VIPT I-cache on CPU1
- [ 0.010261] GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000
- [ 0.010324] CPU1: Booted secondary processor 0x0000000100 [0x517f803c]
- [ 0.011834] Detected VIPT I-cache on CPU2
- [ 0.011864] GICv3: CPU2: found redistributor 200 region 0:0x0000000017aa0000
- [ 0.011912] CPU2: Booted secondary processor 0x0000000200 [0x517f803c]
- [ 0.013546] Detected VIPT I-cache on CPU3
- [ 0.013573] GICv3: CPU3: found redistributor 300 region 0:0x0000000017ac0000
- [ 0.013621] CPU3: Booted secondary processor 0x0000000300 [0x517f803c]
- [ 0.015828] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
- [ 0.015835] Detected VIPT I-cache on CPU4
- [ 0.015862] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000
- [ 0.015905] CPU4: Booted secondary processor 0x0000000400 [0x516f802d]
- [ 0.017887] Detected VIPT I-cache on CPU5
- [ 0.017917] GICv3: CPU5: found redistributor 500 region 0:0x0000000017b00000
- [ 0.017962] CPU5: Booted secondary processor 0x0000000500 [0x516f802d]
- [ 0.020106] Detected VIPT I-cache on CPU6
- [ 0.020135] GICv3: CPU6: found redistributor 600 region 0:0x0000000017b20000
- [ 0.020180] CPU6: Booted secondary processor 0x0000000600 [0x516f802d]
- [ 0.022489] Detected VIPT I-cache on CPU7
- [ 0.022520] GICv3: CPU7: found redistributor 700 region 0:0x0000000017b40000
- [ 0.022566] CPU7: Booted secondary processor 0x0000000700 [0x516f802d]
- [ 0.022644] smp: Brought up 1 node, 8 CPUs
- [ 0.022789] SMP: Total of 8 processors activated.
- [ 0.022799] CPU features: detected: Privileged Access Never
- [ 0.022807] CPU features: detected: LSE atomic instructions
- [ 0.022815] CPU features: detected: User Access Override
- [ 0.022823] CPU features: detected: 32-bit EL0 Support
- [ 0.022831] CPU features: detected: Common not Private translations
- [ 0.022840] CPU features: detected: RAS Extension Support
- [ 0.022849] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
- [ 0.022860] CPU features: detected: CRC32 instructions
- [ 0.045483] CPU: All CPU(s) started at EL1
- [ 0.045531] alternatives: patching kernel code
- [ 0.048500] devtmpfs: initialized
- [ 0.057980] Registered cp15_barrier emulation handler
- [ 0.058022] Registered setend emulation handler
- [ 0.058034] KASLR enabled
- [ 0.058425] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
- [ 0.058451] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
- [ 0.059142] pinctrl core: initialized pinctrl subsystem
- [ 0.060675] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.060678] thermal_sys: Registered thermal governor 'power_allocator'
- [ 0.062689] DMI not present or invalid.
- [ 0.063141] NET: Registered protocol family 16
- [ 0.064244] DMA: preallocated 256 KiB pool for atomic allocations
- [ 0.064261] audit: initializing netlink subsys (disabled)
- [ 0.064381] audit: type=2000 audit(0.064:1): state=initialized audit_enabled=0 res=1
- [ 0.065744] cpuidle: using governor menu
- [ 0.066067] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
- [ 0.066269] ASID allocator initialised with 32768 entries
- [ 0.067680] Serial: AMBA PL011 UART driver
- [ 0.109636] qcom-cpufreq-hw 17d43000.cpufreq: CPUFreq HW driver failed to register
- [ 0.118147] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
- [ 0.118167] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
- [ 0.118178] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.118188] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
- [ 0.119332] cryptd: max_cpu_qlen set to 1000
- [ 0.121398] ACPI: Interpreter disabled.
- [ 0.127719] VBAT: supplied by DC12V
- [ 0.127891] VBAT_SOM: supplied by DC12V
- [ 0.127992] PCIE0_1.05V: supplied by VBAT
- [ 0.128024] VLDO_3V3: supplied by VBAT
- [ 0.128125] VDC_3V3: supplied by DC12V
- [ 0.128320] VDC_5V: supplied by DC12V
- [ 0.128421] LT9611_3V3: supplied by VDC_3V3
- [ 0.128591] LT9611_1V8: supplied by VDC_5V
- [ 0.128625] V5P0_HDMIOUT: supplied by VDC_5V
- [ 0.128750] vph_pwr: supplied by VBAT_SOM
- [ 0.129320] iommu: Default domain type: Translated
- [ 0.129502] vgaarb: loaded
- [ 0.129721] SCSI subsystem initialized
- [ 0.129855] libata version 3.00 loaded.
- [ 0.130020] usbcore: registered new interface driver usbfs
- [ 0.130052] usbcore: registered new interface driver hub
- [ 0.130114] usbcore: registered new device driver usb
- [ 0.130768] pps_core: LinuxPPS API ver. 1 registered
- [ 0.130778] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.130795] PTP clock support registered
- [ 0.130907] EDAC MC: Ver: 3.0.0
- [ 0.131559] qcom_scm: convention: smc arm 64
- [ 0.132484] FPGA manager framework
- [ 0.132558] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.133522] clocksource: Switched to clocksource arch_sys_counter
- [ 0.133654] VFS: Disk quotas dquot_6.6.0
- [ 0.133705] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.133861] pnp: PnP ACPI: disabled
- [ 0.138358] NET: Registered protocol family 2
- [ 0.138818] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
- [ 0.138878] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
- [ 0.139061] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
- [ 0.139433] TCP: Hash tables configured (established 32768 bind 32768)
- [ 0.139520] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
- [ 0.139604] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
- [ 0.139788] NET: Registered protocol family 1
- [ 0.140140] RPC: Registered named UNIX socket transport module.
- [ 0.140150] RPC: Registered udp transport module.
- [ 0.140158] RPC: Registered tcp transport module.
- [ 0.140165] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.140179] PCI: CLS 0 bytes, default 64
- [ 0.140316] Unpacking initramfs...
- [ 0.471440] Freeing initrd memory: 7844K
- [ 0.472522] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
- [ 0.472871] kvm [1]: HYP mode not available
- [ 0.476404] Initialise system trusted keyrings
- [ 0.476519] workingset: timestamp_bits=44 max_order=20 bucket_order=0
- [ 0.480984] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.481443] NFS: Registering the id_resolver key type
- [ 0.481468] Key type id_resolver registered
- [ 0.481475] Key type id_legacy registered
- [ 0.481490] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 0.481668] 9p: Installing v9fs 9p2000 file system support
- [ 0.494057] Key type asymmetric registered
- [ 0.494069] Asymmetric key parser 'x509' registered
- [ 0.494098] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
- [ 0.494112] io scheduler mq-deadline registered
- [ 0.494120] io scheduler kyber registered
- [ 0.505733] EINJ: ACPI disabled.
- [ 0.519233] smps3: supplied by vph_pwr
- [ 0.519287] smps3: Setting 1352000-1352000uV
- [ 0.519446] smps5: supplied by vph_pwr
- [ 0.519482] smps5: Setting 1904000-2040000uV
- [ 0.519596] smps7: supplied by vph_pwr
- [ 0.519640] smps7: Setting 900000-1028000uV
- [ 0.519785] ldo1: supplied by smps7
- [ 0.519813] ldo1: Setting 880000-880000uV
- [ 0.519981] ldo5: supplied by smps7
- [ 0.520010] ldo5: Setting 800000-800000uV
- [ 0.520160] ldo12: supplied by smps5
- [ 0.520201] ldo12: Setting 1800000-1800000uV
- [ 0.520351] ldo7: supplied by smps5
- [ 0.520383] ldo7: Setting 1800000-1800000uV
- [ 0.520564] ldo13: Setting 1800000-2960000uV
- [ 0.520745] ldo17: supplied by smps3
- [ 0.520773] ldo17: Setting 1304000-1304000uV
- [ 0.520935] ldo20: Setting 2960000-2968000uV
- [ 0.521114] ldo21: Setting 2960000-2968000uV
- [ 0.521290] ldo24: Setting 3088000-3088000uV
- [ 0.521471] ldo25: Setting 3300000-3312000uV
- [ 0.521662] ldo26: supplied by smps3
- [ 0.521693] ldo26: Setting 1200000-1200000uV
- [ 0.521973] lvs1: supplied by vreg_s4a_1p8
- [ 0.522750] lvs2: supplied by vreg_s4a_1p8
- [ 0.523547] bob: supplied by vph_pwr
- [ 0.523580] bob: Setting 3312000-3600000uV
- [ 0.527900] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.529846] SuperH (H)SCI(F) driver initialized
- [ 0.530437] msm_serial: driver initialized
- [ 0.530744] 898000.serial: ttyHS0 at MMIO 0x898000 (irq = 135, base_baud = 0) is a MSM
- [ 0.530930] serial serial0: tty port ttyHS0 registered
- [ 0.531128] a84000.serial: ttyMSM0 at MMIO 0xa84000 (irq = 136, base_baud = 0) is a MSM
- [ 1.830899] printk: console [ttyMSM0] enabled
- [ 1.836908] arm-smmu 5040000.iommu: probing hardware configuration...
- [ 1.843423] arm-smmu 5040000.iommu: SMMUv2 with:
- [ 1.848124] arm-smmu 5040000.iommu: stage 1 translation
- [ 1.853499] arm-smmu 5040000.iommu: address translation ops
- [ 1.859216] arm-smmu 5040000.iommu: non-coherent table walk
- [ 1.864930] arm-smmu 5040000.iommu: (IDR0.CTTW overridden by FW configuration)
- [ 1.872314] arm-smmu 5040000.iommu: stream matching with 5 register groups
- [ 1.879364] arm-smmu 5040000.iommu: 5 context banks (0 stage-2 only)
- [ 1.885887] arm-smmu 5040000.iommu: Supported page sizes: 0x63315000
- [ 1.892395] arm-smmu 5040000.iommu: Stage-1: 48-bit VA -> 36-bit IPA
- [ 1.900684] arm-smmu 15000000.iommu: probing hardware configuration...
- [ 1.907289] arm-smmu 15000000.iommu: SMMUv2 with:
- [ 1.912056] arm-smmu 15000000.iommu: stage 1 translation
- [ 1.917523] arm-smmu 15000000.iommu: non-coherent table walk
- [ 1.923331] arm-smmu 15000000.iommu: (IDR0.CTTW overridden by FW configuration)
- [ 1.930795] arm-smmu 15000000.iommu: stream matching with 76 register groups
- [ 1.938018] arm-smmu 15000000.iommu: 45 context banks (0 stage-2 only)
- [ 1.944707] arm-smmu 15000000.iommu: Supported page sizes: 0x61311000
- [ 1.951308] arm-smmu 15000000.iommu: Stage-1: 48-bit VA -> 48-bit IPA
- [ 1.960205] [drm:drm_core_init] Initialized
- [ 1.970762] loop: module loaded
- [ 1.974743] megasas: 07.713.01.00-rc1
- [ 1.978749] ufshcd-qcom 1d84000.ufshc: Adding to iommu group 0
- [ 1.985090] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
- [ 1.995895] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
- [ 2.006428] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
- [ 2.017165] ldo20: supplied by bob
- [ 2.020956] ufshcd-qcom 1d84000.ufshc: ufs_qcom_init: required phy device. hasn't probed yet. err = -517
- [ 2.030535] ufshcd-qcom 1d84000.ufshc: ufshcd_variant_hba_init: variant qcom init failed err -517
- [ 2.039602] ufshcd-qcom 1d84000.ufshc: Initialization failed
- [ 2.045408] ufshcd-qcom 1d84000.ufshc: ufshcd_pltfrm_init() failed -517
- [ 2.056051] spmi spmi-0: PMIC arbiter version v5 (0x50000000)
- [ 2.071938] libphy: Fixed MDIO Bus: probed
- [ 2.076523] tun: Universal TUN/TAP device driver, 1.6
- [ 2.082448] thunder_xcv, ver 1.0
- [ 2.085764] thunder_bgx, ver 1.0
- [ 2.089048] nicpf, ver 1.0
- [ 2.092903] hclge is initializing
- [ 2.096309] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
- [ 2.103606] hns3: Copyright (c) 2017 Huawei Corporation.
- [ 2.109004] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
- [ 2.116121] e1000: Copyright (c) 1999-2006 Intel Corporation.
- [ 2.121950] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
- [ 2.127838] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
- [ 2.133842] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
- [ 2.140877] igb: Copyright (c) 2007-2014 Intel Corporation.
- [ 2.146528] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
- [ 2.154431] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
- [ 2.160742] sky2: driver version 1.30
- [ 2.165255] usbcore: registered new interface driver rtl8150
- [ 2.170992] usbcore: registered new interface driver r8152
- [ 2.176555] usbcore: registered new interface driver asix
- [ 2.182029] usbcore: registered new interface driver ax88179_178a
- [ 2.188283] VFIO - User Level meta-driver version: 0.3
- [ 2.197095] dwc3 a600000.dwc3: Adding to iommu group 1
- [ 2.205242] dwc3 a800000.dwc3: Adding to iommu group 2
- [ 2.211683] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 2.218308] ehci-pci: EHCI PCI platform driver
- [ 2.222835] ehci-platform: EHCI generic platform driver
- [ 2.228273] ehci-orion: EHCI orion driver
- [ 2.232438] ehci-exynos: EHCI Exynos driver
- [ 2.236758] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 2.243014] ohci-pci: OHCI PCI platform driver
- [ 2.247530] ohci-platform: OHCI generic platform driver
- [ 2.252940] ohci-exynos: OHCI Exynos driver
- [ 2.257295] usbcore: registered new interface driver usb-storage
- [ 2.263419] usbcore: registered new interface driver usbserial_generic
- [ 2.270024] usbserial: USB Serial support registered for generic
- [ 2.278867] i2c /dev entries driver
- [ 2.286180] input: pm8941_pwrkey as /devices/platform/soc@0/c440000.spmi/spmi-0/0-00/c440000.spmi:pmic@0:pon@800/c440000.spmi:pmic@0:pon@800:pwrkey/input/input0
- [ 2.301768] input: pm8941_pwrkey as /devices/platform/soc@0/c440000.spmi/spmi-0/0-00/c440000.spmi:pmic@0:pon@800/c440000.spmi:pmic@0:pon@800:resin/input/input1
- [ 2.326525] sdhci: Secure Digital Host Controller Interface driver
- [ 2.332783] sdhci: Copyright(c) Pierre Ossman
- [ 2.337649] Synopsys Designware Multimedia Card Interface Driver
- [ 2.344832] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 2.351964] sdhci_msm 8804000.sdhci: Adding to iommu group 3
- [ 2.357891] sdhci_msm 8804000.sdhci: Got CD GPIO
- [ 2.362662] sdhci_msm 8804000.sdhci: TCXO clk not present (-2)
- [ 2.368771] ldo21: supplied by bob
- [ 2.372331] ldo13: supplied by bob
- [ 2.410754] genirq: irq_chip msmgpio did not update eff. affinity mask of irq 146
- [ 2.418709] mmc0: SDHCI controller on 8804000.sdhci [8804000.sdhci] using ADMA 64-bit
- [ 2.430090] ledtrig-cpu: registered to indicate activity on CPUs
- [ 2.437409] usbcore: registered new interface driver usbhid
- [ 2.443047] usbhid: USB HID core driver
- [ 2.450738] usbcore: registered new interface driver snd-usb-audio
- [ 2.458556] NET: Registered protocol family 10
- [ 2.464902] Segment Routing with IPv6
- [ 2.468694] NET: Registered protocol family 17
- [ 2.473309] 9pnet: Installing 9P2000 support
- [ 2.477676] Key type dns_resolver registered
- [ 2.483049] registered taskstats version 1
- [ 2.487211] Loading compiled-in X.509 certificates
- [ 2.503426] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 1 >= em_cap_state0
- [ 2.513545] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 3 >= em_cap_state2
- [ 2.523648] energy_model: pd0: hertz/watts ratio non-monotonically decreasing: em_cap_state 5 >= em_cap_state4
- [ 2.537161] qcom-qmp-phy 1c06000.phy: Registered Qcom-QMP phy
- [ 2.543489] qcom-qmp-phy 1c0a000.phy: Registered Qcom-QMP phy
- [ 2.549596] qcom-qmp-phy 1d87000.phy: Registered Qcom-QMP phy
- [ 2.555692] qcom-qmp-phy 88e9000.phy: Registered Qcom-QMP phy
- [ 2.561748] qcom-qmp-phy 88eb000.phy: Registered Qcom-QMP phy
- [ 2.567995] qcom-pcie 1c00000.pci: Adding to iommu group 4
- [ 2.573755] qcom-pcie 1c00000.pci: supply vdda not found, using dummy regulator
- [ 2.581302] qcom-pcie 1c00000.pci: host bridge /soc@0/pci@1c00000 ranges:
- [ 2.588158] qcom-pcie 1c00000.pci: IO 0x0060200000..0x00602fffff -> 0x0060200000
- [ 2.596139] qcom-pcie 1c00000.pci: MEM 0x0060300000..0x0060ffffff -> 0x0060300000
- [ 3.727285] qcom-pcie 1c00000.pci: Phy link never came up
- [ 3.734363] qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x40904
- [ 3.741270] qcom-pcie 1c00000.pci: cannot initialize host
- [ 3.746955] qcom-pcie: probe of 1c00000.pci failed with error -110
- [ 3.754641] qcom-pcie 1c08000.pci: Adding to iommu group 5
- [ 3.760471] qcom-pcie 1c08000.pci: supply vdda not found, using dummy regulator
- [ 3.767906] qcom-pcie 1c08000.pci: supply vddpe-3v3 not found, using dummy regulator
- [ 3.775837] qcom-pcie 1c08000.pci: host bridge /soc@0/pci@1c08000 ranges:
- [ 3.782708] qcom-pcie 1c08000.pci: IO 0x0040200000..0x00402fffff -> 0x0040200000
- [ 3.790714] qcom-pcie 1c08000.pci: MEM 0x0040300000..0x005fffffff -> 0x0040300000
- [ 4.923178] qcom-pcie 1c08000.pci: Phy link never came up
- [ 4.930257] qcom_rpmh TCS Busy, retrying RPMH message send: addr=0x40904
- [ 4.937155] qcom-pcie 1c08000.pci: cannot initialize host
- [ 4.942800] qcom-pcie: probe of 1c08000.pci failed with error -110
- [ 4.950369] bam-dma-engine 17184000.dma: Adding to iommu group 6
- [ 4.959645] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
- [ 4.970469] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
- [ 4.980999] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
- [ 4.995594] scsi host0: ufshcd
- [ 5.010607] PM: genpd: Not disabling unused power domains
- [ 5.017188] input: gpio_keys as /devices/platform/gpio_keys/input/input2
- [ 5.025330] clk: Not disabling unused clocks
- [ 5.027054] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
- [ 5.029655] ALSA device list:
- [ 5.029660] No soundcards found.
- [ 5.089478] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
- [ 5.101751] ufshcd-qcom 1d84000.ufshc: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
- [ 5.114413] scsi 0:0:0:49488: Well-known LUN TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6
- [ 5.127330] scsi 0:0:0:49476: Well-known LUN TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6
- [ 5.139257] scsi 0:0:0:49456: Well-known LUN TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6
- [ 5.151907] scsi 0:0:0:0: Direct-Access TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6
- [ 5.162570] sd 0:0:0:0: Power-on or device reset occurred
- [ 5.168631] scsi 0:0:0:1: Direct-Access TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6
- [ 5.169470] sd 0:0:0:0: [sda] 14145536 4096-byte logical blocks: (57.9 GB/54.0 GiB)
- [ 5.178636] sd 0:0:0:1: Power-on or device reset occurred
- [ 5.190147] sd 0:0:0:0: [sda] Write Protect is off
- [ 5.191053] scsi 0:0:0:2: Direct-Access TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6
- [ 5.192279] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
- [ 5.192372] sd 0:0:0:1: [sdb] Write Protect is off
- [ 5.192380] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
- [ 5.193013] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 5.193332] sd 0:0:0:1: [sdb] Optimal transfer size 65536 bytes
- [ 5.195009] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
- [ 5.195423] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 5.204492] random: fast init done
- [ 5.252472] sd 0:0:0:0: [sda] Optimal transfer size 65536 bytes
- [ 5.255675] sd 0:0:0:2: Power-on or device reset occurred
- [ 5.264022] scsi 0:0:0:3: Direct-Access TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6
- [ 5.266966] sd 0:0:0:2: [sdc] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
- [ 5.267761] sdb: sdb1 sdb2
- [ 5.268910] sda: sda1
- [ 5.270484] sd 0:0:0:1: [sdb] Attached SCSI disk
- [ 5.270770] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 5.272666] sd 0:0:0:3: Power-on or device reset occurred
- [ 5.299682] scsi 0:0:0:4: Direct-Access TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6
- [ 5.299791] sd 0:0:0:2: [sdc] Write Protect is off
- [ 5.300054] sd 0:0:0:3: [sdd] 32768 4096-byte logical blocks: (134 MB/128 MiB)
- [ 5.300108] sd 0:0:0:3: [sdd] Write Protect is off
- [ 5.300114] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
- [ 5.300214] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 5.300267] sd 0:0:0:3: [sdd] Optimal transfer size 65536 bytes
- [ 5.310102] sd 0:0:0:4: Power-on or device reset occurred
- [ 5.312717] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
- [ 5.320281] scsi 0:0:0:5: Direct-Access TOSHIBA THGAF8G9T43BAIRB 0300 PQ: 0 ANSI: 6
- [ 5.322505] sd 0:0:0:4: [sde] 1048576 4096-byte logical blocks: (4.29 GB/4.00 GiB)
- [ 5.322553] sd 0:0:0:4: [sde] Write Protect is off
- [ 5.322555] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10
- [ 5.322617] sdd: sdd1 sdd2 sdd3
- [ 5.322646] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 5.322691] sd 0:0:0:4: [sde] Optimal transfer size 65536 bytes
- [ 5.324574] sd 0:0:0:3: [sdd] Attached SCSI disk
- [ 5.325296] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 5.332490] sd 0:0:0:5: Power-on or device reset occurred
- [ 5.417711] sd 0:0:0:2: [sdc] Optimal transfer size 65536 bytes
- [ 5.422518] sd 0:0:0:5: [sdf] 393216 4096-byte logical blocks: (1.61 GB/1.50 GiB)
- [ 5.425690] sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde28
- [ 5.431713] sd 0:0:0:5: [sdf] Write Protect is off
- [ 5.435752] sdc: sdc1 sdc2
- [ 5.439095] sd 0:0:0:2: [sdc] Attached SCSI disk
- [ 5.466409] sd 0:0:0:4: [sde] Attached SCSI disk
- [ 5.469914] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10
- [ 5.480088] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
- [ 5.488885] sd 0:0:0:5: [sdf] Optimal transfer size 65536 bytes
- [ 5.502157] sdf: sdf1 sdf2 sdf3 sdf4 sdf5 sdf6 sdf7 sdf8 sdf9
- [ 5.513806] sd 0:0:0:5: [sdf] Attached SCSI disk
- [ 5.523981] Freeing unused kernel memory: 6272K
- [ 5.534008] Run /init as init process
- [ 5.537742] with arguments:
- [ 5.540754] /init
- [ 5.543072] with environment:
- [ 5.546265] HOME=/
- [ 5.548664] TERM=linux
- Loading, please wait...
- Starting version 245.6-2
- Begin: Loading essential drivers ... done.
- Begin: Running /scripts/init-premount ... done.
- Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
- Begin: Running /scripts/local-premount ... done.
- Warning: fsck not present, so skipping root file system
- [ 5.875773] EXT4-fs (sda1): 4 orphan inodes deleted
- [ 5.880740] EXT4-fs (sda1): recovery complete
- [ 5.888689] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- done.
- Begin: Running /scripts/local-bottom ... done.
- Begin: Running /scripts/init-bottom ... done.
- [ 6.094910] systemd[1]: System time before build time, advancing clock.
- Welcome to Debian GNU/Linux bullseye/sid!
- Configuration file /lib/systemd/system/qrtr-ns.service is marked executable. Please remove executable permission bits. Proceeding anyway.
- [ 6.482845] random: systemd: uninitialized urandom read (16 bytes read)
- system-getty.slic[ 6.492029] random: systemd: uninitialized urandom read (16 bytes read)
- e: unit configures an IP firewal[ 6.505667] random: systemd: uninitialized urandom read (16 bytes read)
- l, but the local system does not support BPF/cgroup firewalling.
- (This warning is only shown for the first unit using IP firewalling.)
- [ OK ] Created slice system-getty.slice.
- [ OK ] Created slice system-modprobe.slice.
- [ OK ] Created slice system-serial\x2dgetty.slice.
- [ OK ] Created slice User and Session Slice.
- [ OK ] Started Dispatch Password …ts to Console Directory Watch.
- [ OK ] Started Forward Password R…uests to Wall Directory Watch.
- [ 6.573001] EXT4-fs (sda1): re-mounted. Opts: data=ordered
- ;32m OK ] Set up automount Arbitrary…s File System Automount Point.
- [ OK ] Reached target Local Encrypted Volumes.
- [ OK ] Reached target User and Group Name Lookups.
- [ OK ] Reached target Paths.
- [ OK ] Reached target Remote File Systems.
- [ OK ] Reached target Slices.
- [ OK ] Reached target Swap.
- [ OK ] Listening on Syslog Socket.
- [ OK ] Listening on fsck to fsckd communication Socket.
- [ OK ] Listening on initctl Compatibility Named Pipe.
- [ OK ] Listening on Journal Audit Socket.
- [ OK ] Listening on Journal Socket (/dev/log).
- [ OK ] Listening on Journal Socket.
- [ OK ] Listening on udev Control Socket.
- [ OK ] Listening on udev Kernel Socket.
- Mounting Huge Pages File System...
- Mounting POSIX Message Queue File System...
- Mounting Kernel Debug File System...
- Starting Set the console keyboard layout...
- Starting Create list of st…odes for the current kernel...
- [ OK ] Started Nameserver information manager.
- [ OK ] Reached target Network (Pre).
- Starting Journal Service...
- Starting Load Kernel Modules...
- Starting Remount Root and Kernel File Systems...
- Starting udev Coldplug all Devices...
- [ OK ] Mounted Huge Pages File System.
- [ OK ] Mounted POSIX Message Queue File System.
- [ OK ] Mounted Kernel Debug File System.
- [ OK ] Finished Create list of st… nodes for the current kernel.
- [ OK ] Finished Load Kernel Modules.
- Mounting Kernel Configuration File System...
- Starting Apply Kernel Variables...
- [ OK ] Mounted Kernel Configuration File System.
- [ OK ] Finished Apply Kernel Variables.
- [ OK ] Finished Remount Root and Kernel File Systems.
- Starting Load/Save Random Seed...
- Starting Create System Users...
- [ OK ] Finished Create System Users.
- Starting Create Static Device Nodes in /dev...
- [ OK ] Finished Set the console keyboard layout.
- [ OK ] Finished Create Static Device Nodes in /dev.
- [ OK ] Reached target Local File Systems (Pre).
- [ OK ] Reached target Local File Systems.
- Starting Set console font and keymap...
- Starting udev Kernel Device Manager...
- [ OK ] Finished udev Coldplug all Devices.
- Starting Helper to synchronize boot up for ifupdown...
- [ OK ] Finished Set console font and keymap.
- [ OK ] Finished Helper to synchronize boot up for ifupdown.
- Starting Raise network interfaces...
- [ OK ] Started Journal Service.
- [ OK 0m[ 6.913782] qcom_q6v5_pas remoteproc-adsp: supply px not found, using dummy regulator
- ] Started udev Kernel Device Manager 6[0m.
- [ 6.936154] NET: Registered protocol family 42
- [ 6.937057] failed to send lookup registration: -19
- [ 6.941831] remoteproc remoteproc0: remoteproc-adsp is available
- [ 6.947691] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- [ 6.952443] qcom_q6v5_pas remoteproc-cdsp: supply cx not found, using dummy regulator
- [ 6.972197] geni_spi 888000.spi: Invalid proto 2
- [ 6.973260] qcom_q6v5_pas remoteproc-cdsp: supply px not found, using dummy regulator
- [ 6.975350] geni_i2c a8c000.i2c: Bus frequency not specified, default to 100kHz.
- [ 6.977277] remoteproc remoteproc2: 4080000.remoteproc is available
- [ 6.985260] remoteproc remoteproc0: powering up remoteproc-adsp
- [ 6.985475] mc: Linux media interface: v0.10
- [ 6.993586] geni_i2c a98000.i2c: Bus frequency not specified, default to 100kHz.
- [ 6.994641] ldo24: supplied by bob
- [ 6.994762] qcom-qusb2-phy 88e2000.phy: Registered Qcom-QUSB2 phy
- [ 6.995725] qcom-qusb2-phy 88e3000.phy: Registered Qcom-QUSB2 phy
- [ 6.998785] remoteproc remoteproc0: Booting fw image qcom/sdm845/adsp.mdt, size 7452
- [ 7.000252] rtc-pm8xxx c440000.spmi:pmic@0:rtc@6000: registered as rtc0
- [ 7.002536] [drm:msm_drm_register [msm]] init
- [ 7.002561] [drm:msm_mdp_register [msm]]
- [ 7.002900] [drm:msm_dsi_register [msm]]
- [ 7.003064] [drm:msm_edp_register [msm]]
- [ 7.004069] adreno 5000000.gpu: Adding to iommu group 7
- [ 7.004396] msm ae00000.mdss: Adding to iommu group 8
- [ 7.004975] rtc-pm8xxx c440000.spmi:pmic@0:rtc@6000: setting system clock to 1970-01-01T00:02:07 UTC (127)
- [ 7.005112] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9d79b200, fsynr=0x110020, cbfrsynra=0x880, cb=0
- [ 7.005147] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9d7f9000, fsynr=0x110020, cbfrsynra=0x880, cb=0
- [ 7.005182] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9d7fd800, fsynr=0x110020, cbfrsynra=0x880, cb=0
- [ 7.005215] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9d802100, fsynr=0x110020, cbfrsynra=0x880, cb=0
- [ 7.005230] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9d806000, fsynr=0x110020, cbfrsynra=0x880, cb=0
- [ 7.005244] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9d807e00, fsynr=0x110020, cbfrsynra=0xc88, cb=0
- [ 7.005259] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9d809c00, fsynr=0x110020, cbfrsynra=0xc88, cb=0
- [ 7.005281] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9d80ba00, fsynr=0x110020, cbfrsynra=0x880, cb=0
- [ 7.005296] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9d80e700, fsynr=0x110020, cbfrsynra=0xc88, cb=0
- [ 7.005310] arm-smmu 15000000.iommu: Unhandled context fault: fsr=0x402, iova=0x9d810400, fsynr=0x110020, cbfrsynra=0xc88, cb=0
- [ 7.009653] remoteproc remoteproc1: remoteproc-cdsp is available
- [ 7.010083] remoteproc remoteproc1: powering up remoteproc-cdsp
- [ 7.014662] videodev: Linux video capture interface: v2.00
- [ 7.018460] [drm:msm_dsi_pll_10nm_init [msm]] DSI PLL0
- [ 7.023168] remoteproc remoteproc1: Booting fw image qcom/sdm845/cdsp.mdt, size 7132
- [ 7.027125] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- [ 7.027187] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
- [ 7.027191] cfg80211: failed to load regulatory.db
- [ 7.029748] [drm:pll_10nm_register.constprop.6 [msm]] DSI0
- [ 7.110224] random: crng init done
- [ 7.120172] [drm:dsi_pll_10nm_vco_recalc_rate [msm]] DSI PLL0 returning vco rate = 0, dec = 2e, frac = 1a000
- [ 7.129692] qcom-venus aa00000.video-codec: Adding to iommu group 9
- [ 7.129790] random: 7 urandom warning(s) missed due to ratelimiting
- [ 7.134487] Bluetooth: Core ver 2.22
- [ 7.142521] qcom-venus aa00000.video-codec: non legacy binding
- [ 7.147044] [drm:dsi_pll_10nm_save_state [msm]] DSI PLL0 outdiv 1 bit_clk_div 1 pix_clk_div 3 pll_mux 1
- [ 7.147071] [drm:msm_dsi_pll_init [msm]] DSI:0 PLL registered
- [ 7.147520] [drm:dpu_mdss_init [msm]] mapped mdss address space @000000007c352162
- [ 7.147769] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
- [ 7.147802] [drm:dsi_bind [msm]]
- [ 7.147832] [drm:dsi_bind [msm]] dsi probed=000000004ef2f59f
- [ 7.147910] msm_dsi ae94000.dsi: supply gdsc not found, using dummy regulator
- [ 7.147987] [drm:msm_runtime_resume [msm]]
- [ 7.148056] [drm:msm_dsi_host_init [msm]] dsi_get_config: Version 3:20020001
- [ 7.148056]
- [ 7.148106] [drm:msm_runtime_suspend [msm]]
- [ 7.148354] [drm:msm_dsi_host_init [msm]] Dsi Host 0 initialized
- [ 7.148464] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
- [ 7.148492] [drm:msm_dsi_host_destroy [msm]]
- [ 7.150489] [drm:dsi_dev_remove [msm]]
- [ 7.150559] [drm:dsi_pll_10nm_destroy [msm]] DSI PLL0
- [ 7.155016] NET: Registered protocol family 31
- [ 7.157744] [drm:msm_dsi_pll_10nm_init [msm]] DSI PLL0
- [ 7.157771] [drm:pll_10nm_register.constprop.6 [msm]] DSI0
- [ 7.157859] [drm:dsi_pll_10nm_vco_recalc_rate [msm]] DSI PLL0 returning vco rate = 0, dec = 0, frac = 0
- [ 7.158253] [drm:dsi_pll_10nm_save_state [msm]] DSI PLL0 outdiv 0 bit_clk_div 1 pix_clk_div f pll_mux 0
- [ 7.158273] [drm:msm_dsi_pll_init [msm]] DSI:0 PLL registered
- [ 7.158785] [drm:dpu_mdss_init [msm]] mapped mdss address space @000000007c352162
- [ 7.158950] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
- [ 7.158972] [drm:dsi_bind [msm]]
- [ 7.158992] [drm:dsi_bind [msm]] dsi probed=00000000621085f4
- [ 7.159046] msm_dsi ae94000.dsi: supply gdsc not found, using dummy regulator
- [ 7.159102] [drm:msm_runtime_resume [msm]]
- [ 7.159160] [drm:msm_dsi_host_init [msm]] dsi_get_config: Version 3:20020001
- [ 7.159160]
- [ 7.159293] [drm:msm_dsi_host_init [msm]] Dsi Host 0 initialized
- [ 7.159346] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
- [ 7.159368] [drm:msm_dsi_host_destroy [msm]]
- [ 7.159422] [drm:msm_runtime_suspend [msm]]
- [ 7.159988] [drm:dsi_dev_remove [msm]]
- [ 7.160046] [drm:dsi_pll_10nm_destroy [msm]] DSI PLL0
- [ 7.163122] [drm:msm_dsi_pll_10nm_init [msm]] DSI PLL0
- [ 7.163147] [drm:pll_10nm_register.constprop.6 [msm]] DSI0
- [ 7.163221] [drm:dsi_pll_10nm_vco_recalc_rate [msm]] DSI PLL0 returning vco rate = 0, dec = 0, frac = 0
- [ 7.163675] [drm:dsi_pll_10nm_save_state [msm]] DSI PLL0 outdiv 0 bit_clk_div 1 pix_clk_div f pll_mux 0
- [ 7.163714] [drm:msm_dsi_pll_init [msm]] DSI:0 PLL registered
- [ 7.164353] [drm:dpu_mdss_init [msm]] mapped mdss address space @0000000073482edc
- [ 7.164522] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
- [ 7.164561] [drm:dsi_bind [msm]]
- [ 7.164601] [drm:dsi_bind [msm]] dsi probed=000000006119951b
- [ 7.164652] msm_dsi ae94000.dsi: supply gdsc not found, using dummy regulator
- [ 7.164736] [drm:msm_runtime_resume [msm]]
- [ 7.164817] [drm:msm_dsi_host_init [msm]] dsi_get_config: Version 3:20020001
- [ 7.164817]
- [ 7.165030] [drm:msm_dsi_host_init [msm]] Dsi Host 0 initialized
- [ 7.165090] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
- [ 7.165131] [drm:msm_dsi_host_destroy [msm]]
- [ 7.165220] [drm:msm_runtime_suspend [msm]]
- [ 7.165407] [drm:dsi_dev_remove [msm]]
- [ 7.165461] [drm:dsi_pll_10nm_destroy [msm]] DSI PLL0
- [ 7.172407] [drm:msm_dsi_pll_10nm_init [msm]] DSI PLL0
- [ 7.180053] Bluetooth: HCI device and connection manager initialized
- [ 7.189929] [drm:pll_10nm_register.constprop.6 [msm]] DSI0
- [ 7.201611] Bluetooth: HCI socket layer initialized
- [ 7.214053] msm-snd-sdm845 soc@0:sound: MultiMedia1: error getting cpu dai name
- [ 7.218612] Bluetooth: L2CAP socket layer initialized
- [ 7.224195] [drm:dsi_pll_10nm_vco_recalc_rate [msm]] DSI PLL0 returning vco rate = 0, dec = 0, frac = 0
- [ 7.225248] ath10k_snoc 18800000.wifi: Adding to iommu group 10
- [ 7.225983] remoteproc remoteproc1: remote processor remoteproc-cdsp is now up
- [ 7.229770] Bluetooth: SCO socket layer initialized
- [ 7.235270] [drm:dsi_pll_10nm_save_state [msm]] DSI PLL0 outdiv 0 bit_clk_div 1 pix_clk_div f pll_mux 0
- [ 7.244087] ldo25: supplied by bob
- [ 7.249303] [drm:msm_dsi_pll_init [msm]] DSI:0 PLL registered
- [ 7.273456] Bluetooth: HCI UART driver ver 2.3
- [ 7.284181] [drm:dpu_mdss_init [msm]] mapped mdss address space @000000007fd548f2
- [ 7.290808] Bluetooth: HCI UART protocol H4 registered
- [ 7.294643] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
- [ 7.301125] Bluetooth: HCI UART protocol BCSP registered
- [ 7.304031] [drm:dsi_bind [msm]]
- [ 7.304053] [drm:dsi_bind [msm]] dsi probed=00000000dac41b38
- [ 7.307853] remoteproc remoteproc0: remote processor remoteproc-adsp is now up
- [ 7.314618] Bluetooth: HCI UART protocol LL registered
- [ 7.321951] msm_dsi ae94000.dsi: supply gdsc not found, using dummy regulator
- [ 7.327552] Bluetooth: HCI UART protocol Three-wire (H5) registered
- [ 7.327641] qcom,fastrpc-cb remoteproc-cdsp:glink-edge:fastrpc:compute-cb@1: Adding to iommu group 11
- [ 7.329650] qcom,fastrpc-cb remoteproc-cdsp:glink-edge:fastrpc:compute-cb@2: Adding to iommu group 12
- [ 7.333336] [drm:msm_runtime_resume [msm]]
- [ 7.334433] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 7.334452] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 1
- [ 7.334584] qcom,fastrpc-cb remoteproc-cdsp:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 13
- [ 7.334650] xhci-hcd xhci-hcd.1.auto: hcc params 0x0230fe65 hci version 0x110 quirks 0x0000000002010010
- [ 7.334697] xhci-hcd xhci-hcd.1.auto: irq 143, io mem 0x0a800000
- [ 7.335222] hub 1-0:1.0: USB hub found
- [ 7.335235] hub 1-0:1.0: 1 port detected
- [ 7.335342] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
- [ 7.335350] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 2
- [ 7.335356] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
- [ 7.335375] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 7.335534] hub 2-0:1.0: USB hub found
- [ 7.335541] hub 2-0:1.0: 1 port detected
- [ 7.336533] qcom,fastrpc-cb remoteproc-cdsp:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 14
- [ 7.337384] Bluetooth: HCI UART protocol Broadcom registered
- [ 7.338399] qcom,fastrpc-cb remoteproc-cdsp:glink-edge:fastrpc:compute-cb@5: Adding to iommu group 15
- [ 7.340208] qcom,fastrpc-cb remoteproc-cdsp:glink-edge:fastrpc:compute-cb@6: Adding to iommu group 16
- [ 7.341921] qcom,fastrpc-cb remoteproc-cdsp:glink-edge:fastrpc:compute-cb@7: Adding to iommu group 17
- [ 7.342400] [drm:msm_dsi_host_init [msm]] dsi_get_config: Version 3:20020001
- [ 7.342400]
- [ 7.343558] qcom,fastrpc-cb remoteproc-cdsp:glink-edge:fastrpc:compute-cb@8: Adding to iommu group 18
- [ 7.346007] qcom,fastrpc-cb remoteproc-adsp:glink-edge:fastrpc:compute-cb@3: Adding to iommu group 19
- [ 7.348003] qcom,fastrpc-cb remoteproc-adsp:glink-edge:fastrpc:compute-cb@4: Adding to iommu group 20
- [ 7.351110] Bluetooth: hci0: setting up wcn399x
- [ 7.352093] Bluetooth: HCI UART protocol QCA registered
- [ 7.354068] [drm:msm_dsi_host_init [msm]] Dsi Host 0 initialized
- [ 7.377941] qcom,slim-ngd-ctrl 171c0000.slim: SLIM SAT: Rcvd master capability
- [ 7.380405] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
- [ 7.384913] qcom,slim-ngd-ctrl 171c0000.slim: SLIM controller Registered
- [ 7.388663] [drm:msm_dsi_host_destroy [msm]]
- [ 7.403720] wcd934x-slim 217:250:1:0: there is not valid maps for state default
- [ 7.409088] [drm:msm_runtime_suspend [msm]]
- [ 7.475693] wcd934x-slim 217:250:1:0: WCD934x chip id major 0x108, minor 0x1
- [ 7.476939] [drm:dsi_dev_remove [msm]]
- [ 7.499512] wcd934x-gpio wcd934x-gpio.3.auto: DMA mask not set
- [ 7.499541] qcom-soundwire wcd934x-soundwire.4.auto: DMA mask not set
- [ 7.502837] [drm:dsi_pll_10nm_destroy [msm]] DSI PLL0
- [ 7.592874] lt9611uxc 5-002b: LT9611 revision: 0x17.04.93
- [ 7.601540] msm-snd-sdm845 soc@0:sound: MultiMedia1: error getting cpu dai name
- [ 7.668095] lt9611uxc 5-002b: LT9611 version: 0x38
- [ 7.680378] qcom-soundwire wcd934x-soundwire.4.auto: Qualcomm Soundwire controller v1.3.0 Registered
- [ 7.704425] wsa881x-codec sdw:0:217:2010:0:2: nonexclusive access to GPIO for powerdown
- [ 7.712977] [drm:msm_dsi_pll_10nm_init [msm]] DSI PLL0
- [ 7.750190] lt9611uxc 5-002b: FW version 0x38, HPD not supported
- [ 7.756340] [drm:pll_10nm_register.constprop.6 [msm]] DSI0
- [ 7.756437] [drm:dsi_pll_10nm_vco_recalc_rate [msm]] DSI PLL0 returning vco rate = 0, dec = 0, frac = 0
- [ 8.089929] [drm:dsi_pll_10nm_save_state [msm]] DSI PLL0 outdiv 0 bit_clk_div 1 pix_clk_div f pll_mux 0
- [ 8.099524] [drm:msm_dsi_pll_init [msm]] DSI:0 PLL registered
- [ 8.100072] [drm:dpu_mdss_init [msm]] mapped mdss address space @000000007c352162
- [[ 8.113069] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
- [ 8.119453] [drm:dsi_bind [msm]]
- OK 8.122849] [drm:dsi_bind [msm]] dsi probm] Found device [ 8.122917] msm_dsi ae940/dev/tt[ 8.12298yMSM0.
- [ 8.123049] [drm:msm_dsi_host_init [msm]] dsi_get_config: Version 3:20020001
- [ 8.123049]
- [ 8.160058] [drm:msm_dsi_host_init [msm]] Dsi Host 0 initialized
- [ 8.166237] [drm:dsi_pll_10nm_get_provider [msm]] DSI PLL0
- [ 8.166264] msm ae00000.mdss: bound ae94000.dsi (ops dsi_ops [msm])
- [ 8.166292] [drm:adreno_bind [msm]] Found GPU: 6.3.0.2
- [ OK 8.183572] [drm:adreno_gpu_init [msm]] fast_ra0m] Finished 8.183685] [drm:msm_gpu_init [;1;39mLoad/Save [ 8.204097] adrRandom Seed.[
- [ 8.204149] adreno 5000000.gpu: supply vddcx not found, using dummy regulator
- [ 8.204183] [drm:msm_gpu_init [msm]] gpu_cx: 000000008b8ccce7
- [ 8.204314] msm ae00000.mdss: [drm:msm_gpu_init [msm]] A630: using IOMMU
- [ 8.240100] platform 506a000.gmu: Adding to iommu group 21
- [ 8.246134] msm ae00000.mdss: bound 5000000.gpu (ops a3xx_ops [msm])
- [ 8.252646] [drm:dpu_kms_hw_init [msm]] mapped dpu address space @000000000ca79d4f
- [ 8.260307] msm_dpu ae01000.mdp: [drm:msm_ioremap [msm]] *ERROR* failed to get memory resource: vbif_nrt
- [ 8.269883] [drm:dpu_kms_hw_init [msm]] VBIF NRT is not defined
- [ 8.269904] msm_dpu ae01000.mdp: [drm:msm_ioremap [msm]] *ERROR* failed to get memory resource: regdma
- [ 8.285279] [drm:dpu_kms_hw_init [msm]] REG_DMA is not defined
- [ 8.285306] [drm:dpu_kms_hw_init:886] dpu hardware revision:0x40000000
- [ 8.286265] Bluetooth: hci0: QCA controller version 0x02140201
- [ 8.291273] [drm:dpu_rm_init [msm]] skip mixer 4 without pingpong
- [ 8.297826] Bluetooth: hci0: QCA Downloading qca/crbtfw21.tlv
- [ 8.303725] [drm:dpu_rm_init [msm]] skip mixer 5 without pingpong
- [ 8.303876] lt9611uxc 5-002b: failed to find dsi host
- [ 8.326958] [drm:dpu_encoder_setup [msm]]
- [ 8.331127] [drm:dpu_encoder_setup [msm]] dsi_info->num_of_h_tiles 1
- [ 8.337563] [drm:dpu_encoder_setup [msm]] h_tile_instance 0 = 0, split_role 0
- [ 8.344786] [drm:dpu_encoder_setup [msm]] enc31
- [ 8.344808] [drm:dpu_encoder_phys_cmd_init [msm]] intf 1
- [ 8.344835] [drm:dpu_encoder_phys_cmd_init [msm]] enc31 intf1 created
- [ 8.344855] [drm:dpu_encoder_setup [msm]] enc31 created
- [[ 8.344876] [drm:_dpu_kms_drm_obj_init [msm]] Create plane type 1 with features 14e8a (cur 0)
- [ 8.344920] [drm:dpu_plane_init [msm]] plane33 created for pipe:1 id:33 virtual:0
- OK m[ 8.344964] [drm:dpu_plane_init [msm]] plane37 created for pipe:2 id:37 virtual:0
- ] [ 8.397317] [drm:_dpu_kms_drm_obj_init [msm]] Create plane type 0 with features 14e8a (cur 0)
- Finished 8.406130] [drm:dpu_plane_i9mRaise network [ 8.415814] interfaces.[ 8.423671] [drm:dpu_plane_init [msm]] plane45 created for pipe:4 id:45 virtual:0
- [ 8.432536] [drm:_dpu_kms_drm_obj_init [msm]] Create plane type 0 with features 1ce02 (cur 0)
- [ 8.441325] [drm:dpu_plane_init [msm]] plane49 created for pipe:9 id:49 virtual:0
- [ 8.448891] [drm:_dpu_kms_drm_obj_init [msm]] Create plane type 0 with features 1ce02 (cur 0)
- [ 8.457512] [drm:dpu_plane_init [msm]] plane53 created for pipe:10 id:53 virtual:0
- [ 8.465170] [drm:_dpu_kms_drm_obj_init [msm]] Create plane type 2 with features 1cf02 (cur 100)
- [ 8.473958] [drm:dpu_plane_init [msm]] plane57 created for pipe:11 id:57 virtual:0
- [ 8.481617] [drm:_dpu_kms_drm_obj_init [msm]] Create plane type 0 with features 1cf02 (cur 100)
- [ 8.490411] [drm:dpu_plane_init [msm]] plane61 created for pipe:12 id:61 virtual:0
- [ 8.498071] [drm:dpu_crtc_init [msm]] crtc65: successfully initialized crtc
- [ 8.505216] [drm:msm_runtime_suspend [msm]]
- [ 8.510142] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 8.516865] [drm:msm_runtime_resume [msm]]
- [ 8.521131] [drm:drm_irq_install] irq=167
- [ 8.525275] [drm:msm_runtime_suspend [msm]]
- [ 8.529629] [drm:drm_minor_register]
- [ 8.533793] [drm:drm_minor_register] new minor registered 128
- [ 8.539598] [drm:drm_minor_register]
- [ 8.543617] [drm:drm_minor_register] new minor registered 0
- [ 8.549444] [drm:drm_sysfs_connector_add] adding "HDMI-A-1" to sysfs
- [ 8.555885] [drm:drm_sysfs_hotplug_event] generating hotplug event
- [ 8.562146] [drm] Initialized msm 1.5.0 20130625 for ae00000.mdss on minor 0
- [ 8.569299] [drm:dpu_plane_reset [msm]] plane33
- [ 8.573991] [drm:dpu_plane_reset [msm]] plane37
- [ 8.578682] [drm:dpu_plane_reset [msm]] plane41
- [ 8.583373] [drm:dpu_plane_reset [msm]] plane45
- [ 8.588071] [drm:dpu_plane_reset [msm]] plane49
- [ 8.592768] [drm:dpu_plane_reset [msm]] plane53
- [ 8.597459] [drm:dpu_plane_reset [msm]] plane57
- [ 8.602151] [drm:dpu_plane_reset [msm]] plane61
- [ 8.607575] msm ae00000.mdss: [drm:adreno_request_fw [msm]] loaded qcom/a630_sqe.fw from new location
- [ 8.617345] msm ae00000.mdss: [drm:adreno_request_fw [msm]] loaded qcom/a630_gmu.bin from new location
- [ 8.633975] [drm:adreno_hw_init [msm]] A630
- [ 8.644026] [drm:drm_client_modeset_probe]
- [ 8.648264] [drm:drm_mode_object_get] OBJ ID: 32 (2)
- [ 8.653294] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:HDMI-A-1]
- [ 8.660843] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:HDMI-A-1] status updated from unknown to connected
- [ 8.671997] [drm:drm_helper_probe_single_connector_modes] [CONNECTOR:32:HDMI-A-1] probed modes :
- [ 8.672004] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148000 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x0
- [ 8.672007] [drm:drm_client_modeset_probe] connector 32 enabled? yes
- [ 8.672017] [drm:drm_client_modeset_probe] Not using firmware configuration
- [ 8.672020] [drm:drm_client_modeset_probe] looking for cmdline mode on connector 32
- [[ 8.672024] [drm:drm_client_modeset_probe] looking for preferred mode on connector 32 0
- [ 8.672025] [drm:drm_client_modeset_probe] found mode 1920x1080
- OK m[ 8.672032] [drm:drm_client_modeset_probe] desired mode 1920x1080 set on crtc 65 (0,0)
- ] [ 8.672033] [drm:drm_mode_object_get] OBJ ID: 32 (2)
- [ 8.672035] [drm:drm_mode_object_put.part.2] OBJ ID: 32 (3)
- Listening on 8.672044] msm ae00000.mdss: [drm:__drm_fb_helper_in;1;39mLoad/Save [ 8.672079] [drm:msm_fbdev_create [msRF …itch Statu[ 8.672100] [drm:msm_s / 0
- [ 8.672184] [drm:dpu_get_dpu_format_ext [msm]] fmt XR24 mod 0x0 ubwc 0 yuv 0
- [ 8.806416] [drm:msm_framebuffer_init [msm]] create: FB ID: 66 (00000000378a2334)
- Starting Flush Journal to Persistent [ 8.817781] [Storage...
- [ 8.825658] [drm:msm_fbdev_create [msm]] par=00000000700f2135, 1920x1080
- [ 8.833757] [drm:msm_fbdev_create [msm]] allocated 1920x1080 fb
- [ 8.834362] systemd-journald[279]: Received client request to flush runtime journal.
- Starting Load/Save RF Kill Switch Status...
- [ 8.847979] [drm:dpu_plane_duplicate_state [msm]] plane33
- [ 8.848002] [drm:dpu_plane_duplicate_state [msm]] plane37
- [ 8.848023] [drm:dpu_plane_duplicate_state [msm]] plane41
- [ 8.848043] [drm:dpu_plane_duplicate_state [msm]] plane45
- [ 8.848064] [drm:dpu_plane_duplicate_state [msm]] plane49
- [ 8.848084] [drm:dpu_plane_duplicate_state [msm]] plane53
- [ 8.848105] [drm:dpu_plane_duplicate_state [msm]] plane57
- [ 8.848125] [drm:dpu_plane_duplicate_state [msm]] plane61
- [ 8.848145] [drm:drm_mode_object_get] OBJ ID: 66 (1)
- [ 8.848153] [drm:drm_mode_object_get] OBJ ID: 32 (2)
- [ 8.848155] [drm:drm_mode_object_get] OBJ ID: 32 (3)
- [ 8.848191] [drm:dpu_encoder_virt_atomic_check [msm]] enc31
- [ 8.848212] [drm:dpu_encoder_phys_cmd_mode_fixup [msm]] enc31 intf1
- [ 8.848232] [drm:dpu_rm_reserve [msm]] reserving hw for enc 31 crtc 65
- [ 8.848251] [drm:dpu_encoder_get_hw_resources [msm]] enc31
- [ 8.848270] [drm:dpu_rm_reserve [msm]] num_lm: 2 num_enc: 0 num_intf: 1
- [ 8.848292] [drm:dpu_rm_reserve [msm]] ctl 1 caps 0x2
- [ 8.848311] [drm:dpu_rm_reserve [msm]] ctl 2 caps 0x2
- [ 8.848330] [drm:dpu_rm_reserve [msm]] ctl 3 caps 0x0
- [ 8.848349] [drm:dpu_rm_reserve [msm]] ctl 3 match
- [ 8.848380] [drm:dpu_crtc_atomic_check [msm]] crtc65: check
- [ 8.848388] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148000 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x0
- [ 8.848408] [drm:dpu_crtc_atomic_check [msm]] crtc65: zpos 0
- [ 8.848428] [drm:dpu_core_perf_crtc_check [msm]] crtc=65 clk_rate=300000000 core_ib=6800000000 core_ab=6800000000
- [ 8.848446] [drm:dpu_core_perf_crtc_check [msm]] calculated bandwidth=6800000k
- [ 8.848466] [drm:dpu_core_perf_crtc_check [msm]] final threshold bw limit = 6800000
- [ 8.848485] [drm:dpu_core_perf_crtc_check [msm]] bypass bandwidth check
- [ 8.848510] [drm:dpu_plane_prepare_fb [msm]] plane33 FB[66]
- [ 8.848532] [drm:msm_framebuffer_prepare [msm]] FB[66]: iova[0]: 00002000 (0)
- [ 8.848591] [drm:msm_runtime_resume [msm]]
- [ 8.848661] [drm:drm_calc_timestamping_constants] crtc 65: hwmode: htotal 2200, vtotal 1125, vdisplay 1080
- [ 8.848663] [drm:drm_calc_timestamping_constants] crtc 65: clock 148000 kHz framedur 16722972 linedur 14864
- [ 8.848684] [drm:dpu_encoder_virt_mode_set [msm]] enc31
- [ 8.848706] [drm:dpu_encoder_phys_cmd_mode_set [msm]] enc31 intf1 caching mode:
- [ 8.848709] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148000 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x0
- [ 8.848732] [drm:dsi_mgr_bridge_mode_set [msm]] set mode: "1920x1080": 60 148000 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x0
- [ 8.848752] [drm:dpu_crtc_atomic_begin [msm]] crtc65
- [ 8.848755] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148000 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x0
- [ 8.848778] [drm:dpu_crtc_atomic_begin [msm]] crtc65
- [ 8.848802] [drm:dpu_crtc_atomic_begin [msm]] crtc 65 stage:1 - plane 33 sspp 0 fb 66
- [ 8.848823] [drm:dpu_crtc_atomic_begin [msm]] format:XR24 little-endian (0x34325258), alpha_en:0 blend_op:0x100
- [ 8.848842] [drm:dpu_crtc_atomic_begin [msm]] format:XR24 little-endian (0x34325258), alpha_en:0 blend_op:0x100
- [ 8.848865] [drm:dpu_crtc_atomic_begin [msm]] lm 0, op_mode 0x2, ctl 2, flush mask 0x20041
- [ 8.848887] [drm:dpu_crtc_atomic_begin [msm]] lm 1, op_mode 0x2, ctl 2, flush mask 0x20081
- [ 8.848907] [drm:dpu_plane_atomic_update [msm]] plane33
- [ 8.848929] [drm:_dpu_plane_set_qos_ctrl.constprop.21 [msm]] plane33: pnum:0 ds:0 vb:0 pri[0x0, 0x0] is_rt:1
- [ 8.848951] [drm:dpu_plane_atomic_update [msm]] plane33 FB[66] 1920.000000x1080.000000+0.000000+0.000000->crtc65 1920x1080+0+0, XR24 ubwc 0
- [ 8.848978] [drm:dpu_get_dpu_format_ext [msm]] plane format modifier 0x0
- [ 8.848997] [drm:dpu_get_dpu_format_ext [msm]] fmt XR24 mod 0x0 ubwc 0 yuv 0
- [ 8.849018] [drm:dpu_plane_atomic_update [msm]] plane33: pnum:0 fmt: XR24 w:1920 fl:13
- [ 8.849038] [drm:dpu_plane_atomic_update [msm]] plane33: pnum:0 fmt: XR24 rt:1 fl:13 lut:0x222222223357
- [ 8.849057] [drm:dpu_get_dpu_format_ext [msm]] plane format modifier 0x0
- [ 8.849076] [drm:dpu_get_dpu_format_ext [msm]] fmt XR24 mod 0x0 ubwc 0 yuv 0
- [ 8.849096] [drm:dpu_plane_atomic_update [msm]] plane33: pnum:0 fmt: XR24 mode:0 luts[0xf, 0x0]
- [ 8.849115] [drm:_dpu_plane_set_qos_ctrl.constprop.21 [msm]] plane33: pnum:0 ds:1 vb:0 pri[0x0, 0x0] is_rt:1
- [ 8.849136] [drm:dpu_vbif_set_ot_limit [msm]] vbif:0 xin:0 ot_lim:0
- [ 8.849155] [drm:dpu_plane_atomic_update [msm]] plane33 pipe:0 vbif:0 xin:0 rt:1, clk_ctrl:1
- [ 8.849176] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:0/3
- [ 8.849197] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:1/3
- [ 8.849217] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:2/4
- [ 8.849237] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:3/4
- [ 8.849257] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:4/5
- [ 8.849277] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:5/5
- [ 8.849297] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:6/6
- [ 8.849318] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:7/6
- [ 8.849339] [drm:dpu_crtc_atomic_flush [msm]] crtc65
- [ 8.849358] [drm:dpu_crtc_atomic_flush [msm]] already received dpu_crtc->event
- [ 8.849377] [drm:dpu_plane_restore [msm]] plane33
- [ 8.849396] [drm:dpu_plane_atomic_update [msm]] plane33
- [ 8.849416] [drm:_dpu_plane_set_qos_ctrl.constprop.21 [msm]] plane33: pnum:0 ds:0 vb:0 pri[0x0, 0x0] is_rt:1
- [ 8.849437] [drm:dpu_plane_atomic_update [msm]] plane33 FB[66] 1920.000000x1080.000000+0.000000+0.000000->crtc65 1920x1080+0+0, XR24 ubwc 0
- [ 8.849460] [drm:dpu_get_dpu_format_ext [msm]] plane format modifier 0x0
- [ 8.849478] [drm:dpu_get_dpu_format_ext [msm]] fmt XR24 mod 0x0 ubwc 0 yuv 0
- [ 8.849498] [drm:dpu_plane_atomic_update [msm]] plane33: pnum:0 fmt: XR24 w:1920 fl:13
- [ 8.849517] [drm:dpu_plane_atomic_update [msm]] plane33: pnum:0 fmt: XR24 rt:1 fl:13 lut:0x222222223357
- [ 8.849551] [drm:dpu_get_dpu_format_ext [msm]] plane format modifier 0x0
- [ 8.849569] [drm:dpu_get_dpu_format_ext [msm]] fmt XR24 mod 0x0 ubwc 0 yuv 0
- [ 8.849589] [drm:dpu_plane_atomic_update [msm]] plane33: pnum:0 fmt: XR24 mode:0 luts[0xf, 0x0]
- [ 8.849609] [drm:_dpu_plane_set_qos_ctrl.constprop.21 [msm]] plane33: pnum:0 ds:1 vb:0 pri[0x0, 0x0] is_rt:1
- [ 8.849628] [drm:dpu_vbif_set_ot_limit [msm]] vbif:0 xin:0 ot_lim:0
- [ 8.849647] [drm:dpu_plane_atomic_update [msm]] plane33 pipe:0 vbif:0 xin:0 rt:1, clk_ctrl:1
- [ 8.849667] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:0/3
- [ 8.849688] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:1/3
- [ 8.849708] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:2/4
- [ 8.849728] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:3/4
- [ 8.849748] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:4/5
- [ 8.849769] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:5/5
- [ 8.849789] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:6/6
- [ 8.849809] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:7/6
- [ 8.849830] [drm:dpu_core_perf_crtc_update [msm]] crtc:65 stop_req:0 core_clk:0
- [ 8.849850] [drm:dpu_core_perf_crtc_update [msm]] crtc=65 p=1 new_bw=6800000000,old_bw=0
- [ 8.849869] [drm:_dpu_core_perf_crtc_update_bus.isra.5 [msm]] crtc=65 bw=6800000000
- [ 8.849893] [drm:dpu_core_perf_crtc_update [msm]] clk:300000000
- [ 8.849912] [drm:dpu_core_perf_crtc_update [msm]] update clk rate = 300000000 HZ
- [ 8.849933] [drm:dpu_crtc_enable [msm]] crtc65
- [ 8.849956] [drm:dsi_mgr_bridge_pre_enable [msm]] id=0
- [ 8.849976] [drm:msm_dsi_host_reset_phy [msm]]
- [ 8.851080] dsi_calc_pclk: forcing mdss_dsi lanes to 1
- [ 8.851099] [drm:dsi_calc_pclk [msm]] pclk=148000000, bclk=444000000
- [ 8.851122] [drm:msm_dsi_phy_enable [msm]]
- [ 8.851194] [drm:dsi_10nm_phy_enable [msm]]
- [ 8.851217] [drm:msm_dsi_dphy_timing_calc_v3 [msm]] 80, 31, 1, 107, 32, 30, 66, 58, 29, 31, 22, 22, 0, 0, 0, 0
- [ 8.851254] [drm:dsi_pll_10nm_set_usecase [msm]] DSI PLL0
- [ 8.851314] [drm:dsi_10nm_phy_enable [msm]] DSI0 PHY enabled
- [ 8.851337] [drm:dsi_pll_10nm_restore_state [msm]] DSI PLL0
- [ 8.851358] [drm:msm_dsi_host_power_on [msm]]
- [ 8.851412] [drm:msm_dsi_runtime_resume [msm]] id=0
- [ 8.851434] [drm:dsi_link_clk_set_rate_6g [msm]] Set clk rates: pclk=148000, byteclk=444000000
- [ 8.851497] [drm:dsi_pll_10nm_vco_set_rate [msm]] DSI PLL0 rate=3500000000, parent's=0
- [ 8.851517] [drm:dsi_pll_10nm_vco_set_rate [msm]] SSC not enabled
- [ 8.851517]
- [ 8.851558] [drm:dsi_pll_10nm_vco_recalc_rate [msm]] DSI PLL0 returning vco rate = 3499999951, dec = 5b, frac = 9555
- [ 8.851591] dsi_link_clk_set_rate_6g: Failed to set rate pixel clk, -22
- [ 8.851593] msm_dsi_host_power_on: failed to enable link clocks. ret=-22
- [ 8.851613] [drm:dsi_host_regulator_disable [msm]]
- [ 8.851619] dsi_mgr_bridge_pre_enable: power on host 0 failed, -22
- [ 8.851639] [drm:dsi_phy_regulator_disable [msm]]
- [ 8.851667] [drm:dpu_encoder_phys_cmd_enable [msm]] enc31 intf1 pp 0
- [ 8.851688] [drm:dpu_encoder_phys_cmd_enable_helper [msm]] enc31 intf1 pp 0, enabling mode:
- [ 8.851696] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148000 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x0
- [ 8.851716] [drm:dpu_encoder_phys_cmd_enable_helper [msm]] enc31 intf1 pp 0
- [ 8.851738] [drm:dpu_encoder_phys_cmd_enable_helper [msm]] enc31 intf1 tc 0 vsync_clk_speed_hz 19200000 vtotal 1125 vrefresh 60
- [ 8.851760] [drm:dpu_encoder_phys_cmd_enable_helper [msm]] enc31 intf1 tc 0 enable 1 start_pos 1080 rd_ptr_irq 1081
- [ 8.851779] [drm:dpu_encoder_phys_cmd_enable_helper [msm]] enc31 intf1 tc 0 hw_vsync_mode 0 vsync_count 284 vsync_init_val 1080
- [ 8.851800] [drm:dpu_encoder_phys_cmd_enable_helper [msm]] enc31 intf1 tc 0 cfgheight 65520 thresh_start 4 thresh_cont 4
- [ 8.851827] [drm:_dpu_encoder_irq_control [msm]] enc31 enable:1
- [ 8.851868] [drm:dpu_core_irq_register_callback [msm]] [dpu_encoder_helper_register_irq+0x11c/0x378 [msm]] irq_idx=8
- [ 8.851888] [drm:dpu_core_irq_enable [msm]] irq_idx=8 enable_count=0
- [ 8.851909] [drm:dpu_core_irq_enable [msm]] irq_idx=8 ret=0
- [ 8.851947] [drm:dpu_core_irq_register_callback [msm]] [dpu_encoder_helper_register_irq+0x11c/0x378 [msm]] irq_idx=26
- [ 8.851967] [drm:dpu_core_irq_enable [msm]] irq_idx=26 enable_count=0
- [ 8.851987] [drm:dpu_core_irq_enable [msm]] irq_idx=26 ret=0
- [ 8.852007] [drm:dpu_encoder_phys_cmd_control_vblank_irq [msm]] id:31 pp:0 enable=true/0
- [ 8.852045] [drm:dpu_core_irq_register_callback [msm]] [dpu_encoder_helper_register_irq+0x11c/0x378 [msm]] irq_idx=12
- [ 8.852065] [drm:dpu_core_irq_enable [msm]] irq_idx=12 enable_count=0
- [ 8.852086] [drm:dpu_core_irq_enable [msm]] irq_idx=12 ret=0
- [ 8.852122] [drm:dpu_core_irq_register_callback [msm]] [dpu_encoder_helper_register_irq+0x11c/0x378 [msm]] irq_idx=43
- [ 8.852141] [drm:dpu_core_irq_enable [msm]] irq_idx=43 enable_count=0
- [ 8.852160] [drm:dpu_core_irq_enable [msm]] irq_idx=43 ret=0
- [ 8.852183] [drm:dsi_mgr_bridge_enable [msm]] id=0
- [ 8.852204] [drm:dpu_encoder_phys_cmd_prepare_for_kickoff [msm]] id:31 pp:0 pending_cnt:0
- [ 8.852223] [drm:dpu_encoder_helper_wait_for_irq [msm]] id=31, intr=1, hw=1, irq=8, pp=0, pending_cnt=0
- [ 8.852243] [drm:dpu_encoder_phys_cmd_prepare_for_kickoff [msm]] enc31 intf1 pp:0 pending_cnt 0
- [ 8.852262] [drm:dpu_encoder_resource_control [msm]] id;31, sw_event:1, rc in ON state
- [ 8.852282] [drm:dpu_crtc_commit_kickoff [msm]] crtc65 first commit
- [ 8.852309] [drm:dpu_encoder_vsync_time [msm]] enc31 clk_rate=148000kHz, clk_period=6757, linetime=14865ns
- [ 8.852330] [drm:dpu_encoder_vsync_time [msm]] enc31 cur_line=39 vtotal=1125 time_to_vsync=16143390, cur_time=8850, wakeup_time=8866
- [ 8.852334] systemd-journald[279]: File /var/log/journal/76cf9b69371948259d429edc9d13d952/system.journal corrupted or uncleanly shut down, renaming and replacing.
- [ 8.852352] [drm:dpu_encoder_wait_for_event [msm]] enc31
- [ 8.852372] [drm:dpu_encoder_helper_wait_for_irq [msm]] id=31, intr=3, hw=3, irq=43, pp=0, pending_cnt=0
- [ 8.852387] [drm:drm_mode_object_put.part.2] OBJ ID: 32 (4)
- [ 8.852405] [drm:dpu_crtc_destroy_state [msm]] crtc65
- [ 8.852520] Console: switching to colour frame buffer device 240x67
- [ 8.852560] [drm:dpu_plane_duplicate_state [msm]] plane33
- [ 8.852563] [drm:drm_mode_object_get] OBJ ID: 66 (2)
- [ 8.852566] [drm:drm_mode_object_get] OBJ ID: 67 (1)
- [ 8.852586] [drm:dpu_plane_duplicate_state [msm]] plane37
- [ 8.852606] [drm:dpu_plane_duplicate_state [msm]] plane41
- [ 8.852625] [drm:dpu_plane_duplicate_state [msm]] plane45
- [ 8.852645] [drm:dpu_plane_duplicate_state [msm]] plane49
- [ 8.852665] [drm:dpu_plane_duplicate_state [msm]] plane53
- [ 8.852684] [drm:dpu_plane_duplicate_state [msm]] plane57
- [ 8.852704] [drm:dpu_plane_duplicate_state [msm]] plane61
- [ 8.852709] [drm:drm_mode_object_get] OBJ ID: 66 (3)
- [ 8.852710] [drm:drm_mode_object_put.part.2] OBJ ID: 66 (4)
- [ 8.852717] [drm:drm_mode_object_get] OBJ ID: 32 (4)
- [ 8.852719] [drm:drm_mode_object_get] OBJ ID: 32 (5)
- [ 8.852721] [drm:drm_mode_object_put.part.2] OBJ ID: 32 (5)
- [ 8.852722] [drm:drm_mode_object_get] OBJ ID: 32 (4)
- [ 8.852753] [drm:dpu_encoder_virt_atomic_check [msm]] enc31
- [ 8.852773] [drm:dpu_encoder_phys_cmd_mode_fixup [msm]] enc31 intf1
- [ 8.852800] [drm:dpu_crtc_atomic_check [msm]] crtc65: check
- [ 8.852805] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148000 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x0
- [ 8.852825] [drm:dpu_crtc_atomic_check [msm]] crtc65: zpos 0
- [ 8.852844] [drm:dpu_core_perf_crtc_check [msm]] crtc=65 clk_rate=300000000 core_ib=6800000000 core_ab=6800000000
- [ 8.852863] [drm:dpu_core_perf_crtc_check [msm]] calculated bandwidth=6800000k
- [ 8.852884] [drm:dpu_core_perf_crtc_check [msm]] final threshold bw limit = 6800000
- [ 8.852902] [drm:dpu_core_perf_crtc_check [msm]] bypass bandwidth check
- [ 8.852926] [drm:dpu_plane_prepare_fb [msm]] plane33 FB[66]
- [ 8.852948] [drm:msm_framebuffer_prepare [msm]] FB[66]: iova[0]: 00002000 (0)
- [ 8.938223] [drm:dpu_encoder_frame_done_timeout:2095] [dpu error]enc31 frame done timeout
- [ 8.938549] [drm:dpu_crtc_frame_event_work [msm]] crtc65 event:2 ts:8936721037
- [ 9.289646] Bluetooth: hci0: QCA Downloading qca/crnv21.bin
- [ 9.325837] Bluetooth: hci0: QCA setup on UART is completed
- [ 9.822117] [drm:dpu_encoder_wait_for_event [msm]] enc31
- [ 9.822185] [drm:dpu_encoder_helper_wait_for_irq [msm]] id=31, intr=3, hw=3, irq=43, pp=0, pending_cnt=0
- [ 9.822215] [drm:drm_calc_timestamping_constants] crtc 65: hwmode: htotal 2200, vtotal 1125, vdisplay 1080
- [ 9.822223] [drm:drm_calc_timestamping_constants] crtc 65: clock 148000 kHz framedur 16722972 linedur 14864
- [ 9.822286] [drm:dpu_crtc_atomic_begin [msm]] crtc65
- [ 9.822300] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148000 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x0
- [ 9.822365] [drm:dpu_crtc_atomic_begin [msm]] crtc65
- [ 9.822431] [drm:dpu_crtc_atomic_begin [msm]] crtc 65 stage:1 - plane 33 sspp 0 fb 66
- [ 9.822497] [drm:dpu_crtc_atomic_begin [msm]] format:XR24 little-endian (0x34325258), alpha_en:0 blend_op:0x100
- [ 9.822560] [drm:dpu_crtc_atomic_begin [msm]] format:XR24 little-endian (0x34325258), alpha_en:0 blend_op:0x100
- [ 9.822628] [drm:dpu_crtc_atomic_begin [msm]] lm 0, op_mode 0x2, ctl 2, flush mask 0x20041
- [ 9.822692] [drm:dpu_crtc_atomic_begin [msm]] lm 1, op_mode 0x2, ctl 2, flush mask 0x20081
- [ 9.822755] [drm:dpu_plane_atomic_update [msm]] plane33
- [ 9.822824] [drm:_dpu_plane_set_qos_ctrl.constprop.21 [msm]] plane33: pnum:0 ds:0 vb:0 pri[0x0, 0x0] is_rt:1
- [ 9.822894] [drm:dpu_plane_atomic_update [msm]] plane33 FB[66] 1920.000000x1080.000000+0.000000+0.000000->crtc65 1920x1080+0+0, XR24 ubwc 0
- [ 9.822966] [drm:dpu_get_dpu_format_ext [msm]] plane format modifier 0x0
- [ 9.823028] [drm:dpu_get_dpu_format_ext [msm]] fmt XR24 mod 0x0 ubwc 0 yuv 0
- [ 9.823093] [drm:dpu_plane_atomic_update [msm]] plane33: pnum:0 fmt: XR24 w:1920 fl:13
- [ 9.823158] [drm:dpu_plane_atomic_update [msm]] plane33: pnum:0 fmt: XR24 rt:1 fl:13 lut:0x222222223357
- [ 9.823219] [drm:dpu_get_dpu_format_ext [msm]] plane format modifier 0x0
- [ 9.823279] [drm:dpu_get_dpu_format_ext [msm]] fmt XR24 mod 0x0 ubwc 0 yuv 0
- [ 9.823344] [drm:dpu_plane_atomic_update [msm]] plane33: pnum:0 fmt: XR24 mode:0 luts[0xf, 0x0]
- [ 9.823407] [drm:_dpu_plane_set_qos_ctrl.constprop.21 [msm]] plane33: pnum:0 ds:1 vb:0 pri[0x0, 0x0] is_rt:1
- [ 9.823472] [drm:dpu_vbif_set_ot_limit [msm]] vbif:0 xin:0 ot_lim:0
- [ 9.823534] [drm:dpu_plane_atomic_update [msm]] plane33 pipe:0 vbif:0 xin:0 rt:1, clk_ctrl:1
- [ 9.823598] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:0/3
- [ 9.823661] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:1/3
- [ 9.823724] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:2/4
- [ 9.823786] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:3/4
- [ 9.823848] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:4/5
- [ 9.823910] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:5/5
- [ 9.823973] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:6/6
- [ 9.824035] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:7/6
- [ 9.824098] [drm:dpu_crtc_atomic_flush [msm]] crtc65
- [ 9.824159] [drm:dpu_crtc_atomic_flush [msm]] already received dpu_crtc->event
- [ 9.824220] [drm:dpu_plane_restore [msm]] plane33
- [ 9.824279] [drm:dpu_plane_atomic_update [msm]] plane33
- [ 9.824343] [drm:_dpu_plane_set_qos_ctrl.constprop.21 [msm]] plane33: pnum:0 ds:0 vb:0 pri[0x0, 0x0] is_rt:1
- [ 9.824408] [drm:dpu_plane_atomic_update [msm]] plane33 FB[66] 1920.000000x1080.000000+0.000000+0.000000->crtc65 1920x1080+0+0, XR24 ubwc 0
- [ 9.824473] [drm:dpu_get_dpu_format_ext [msm]] plane format modifier 0x0
- [ 9.824532] [drm:dpu_get_dpu_format_ext [msm]] fmt XR24 mod 0x0 ubwc 0 yuv 0
- [ 9.824594] [drm:dpu_plane_atomic_update [msm]] plane33: pnum:0 fmt: XR24 w:1920 fl:13
- [ 9.824656] [drm:dpu_plane_atomic_update [msm]] plane33: pnum:0 fmt: XR24 rt:1 fl:13 lut:0x222222223357
- [ 9.824716] [drm:dpu_get_dpu_format_ext [msm]] plane format modifier 0x0
- [ 9.824776] [drm:dpu_get_dpu_format_ext [msm]] fmt XR24 mod 0x0 ubwc 0 yuv 0
- [ 9.824837] [drm:dpu_plane_atomic_update [msm]] plane33: pnum:0 fmt: XR24 mode:0 luts[0xf, 0x0]
- [ 9.824900] [drm:_dpu_plane_set_qos_ctrl.constprop.21 [msm]] plane33: pnum:0 ds:1 vb:0 pri[0x0, 0x0] is_rt:1
- [ 9.824962] [drm:dpu_vbif_set_ot_limit [msm]] vbif:0 xin:0 ot_lim:0
- [ 9.825023] [drm:dpu_plane_atomic_update [msm]] plane33 pipe:0 vbif:0 xin:0 rt:1, clk_ctrl:1
- [ 9.825085] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:0/3
- [ 9.825148] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:1/3
- [ 9.825210] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:2/4
- [ 9.825271] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:3/4
- [ 9.825334] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:4/5
- [ 9.825396] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:5/5
- [ 9.825458] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:6/6
- [ 9.825521] [drm:dpu_vbif_set_qos_remap [msm]] vbif:0 xin:0 lvl:7/6
- [ 9.825626] [drm:dpu_core_perf_crtc_update [msm]] crtc:65 stop_req:0 core_clk:300000000
- [ 9.825698] [drm:dpu_encoder_phys_cmd_prepare_for_kickoff [msm]] id:31 pp:0 pending_cnt:1
- [ 9.825726] [drm:dpu_encoder_helper_wait_for_irq [msm]] id=31, intr=1, hw=1, irq=8, pp=0, pending_cnt=1
- [ 9.914354] [drm:dpu_encoder_helper_wait_for_irq [msm]] irq timeout id=31, intr=1, hw=1, irq=8, pp=0, atomic_cnt=1
- [ 9.914417] [drm:_dpu_encoder_phys_cmd_wait_for_idle [msm]] *ERROR* id:31 pp:0 kickoff timeout 2 cnt 1 koff_cnt 1
- [ 9.914444] [drm:dpu_core_irq_disable [msm]] irq_idx=12 enable_count=1
- [ 9.914469] [drm:dpu_core_irq_disable [msm]] irq_idx=12 ret=0
- [ 9.914513] [drm:dpu_core_irq_unregister_callback [msm]] [dpu_encoder_helper_unregister_irq+0xac/0x160 [msm]] irq_idx=12
- [ 9.914550] [drm:dpu_encoder_phys_cmd_prepare_for_kickoff [msm]] *ERROR* failed wait_for_idle: id:31 ret:-110 pp:0
- [ 9.914573] [drm:dpu_encoder_phys_cmd_prepare_for_kickoff [msm]] enc31 intf1 pp:0 pending_cnt 0
- [ 9.914598] [drm:dpu_encoder_resource_control [msm]] enc31 sw_event:1, work cancelled
- [ 9.914622] [drm:dpu_encoder_resource_control [msm]] id;31, sw_event:1, rc in ON state
- [ 9.914645] [drm:dpu_encoder_prepare_for_kickoff [msm]] id:31 ctl 3 reset
- [ 9.914671] [drm:dpu_crtc_commit_kickoff [msm]] crtc65 first commit
- [ 9.914704] [drm:dpu_encoder_vsync_time [msm]] enc31 clk_rate=148000kHz, clk_period=6757, linetime=14865ns
- [ 9.914729] [drm:dpu_encoder_vsync_time [msm]] enc31 cur_line=64455 vtotal=1125 time_to_vsync=16723125, cur_time=9913, wakeup_time=9929
- [ 9.914752] [drm:dpu_encoder_wait_for_event [msm]] enc31
- [ 9.914774] [drm:dpu_encoder_helper_wait_for_irq [msm]] id=31, intr=3, hw=3, irq=43, pp=0, pending_cnt=1
- [ 9.915136] [drm:dpu_crtc_frame_event_work [msm]] crtc65 event:2 ts:9913011349
- [ 9.915159] [drm:dpu_plane_cleanup_fb [msm]] plane33 FB[66]
- [ 9.915172] [drm:drm_mode_object_put.part.2] OBJ ID: 32 (5)
- [ 9.915174] [drm:drm_mode_object_put.part.2] OBJ ID: 32 (4)
- [ 9.915197] [drm:dpu_crtc_destroy_state [msm]] crtc65
- [ 9.915201] [drm:drm_mode_object_put.part.2] OBJ ID: 67 (2)
- [ 9.915204] [drm:drm_mode_object_put.part.2] OBJ ID: 66 (3)
- [ 9.915248] [drm:dpu_plane_duplicate_state [msm]] plane33
- [ 9.915250] [drm:drm_mode_object_get] OBJ ID: 66 (2)
- [ 9.915253] [drm:drm_mode_object_get] OBJ ID: 67 (1)
- [ 9.915254] [drm:drm_mode_object_get] OBJ ID: 68 (1)
- [ 9.915293] [drm:dpu_crtc_atomic_check [msm]] crtc65: check
- [ 9.915299] [drm:drm_mode_debug_printmodeline] Modeline "1920x1080": 60 148000 1920 2008 2052 2200 1080 1084 1089 1125 0x48 0x0
- [ 9.915322] [drm:dpu_crtc_atomic_check [msm]] crtc65: zpos 0
- [ 9.915346] [drm:dpu_core_perf_crtc_check [msm]] crtc=65 clk_rate=300000000 core_ib=6800000000 core_ab=6800000000
- [ 9.915368] [drm:dpu_core_perf_crtc_check [msm]] calculated bandwidth=6800000k
- [ 9.915392] [drm:dpu_core_perf_crtc_check [msm]] final threshold bw limit = 6800000
- [ 9.915414] [drm:dpu_core_perf_crtc_check [msm]] bypass bandwidth check
- [ 9.915442] [drm:dpu_plane_prepare_fb [msm]] plane33 FB[66]
- [ 9.915469] [drm:msm_framebuffer_prepare [msm]] FB[66]: iova[0]: 00002000 (0)
- [ 10.004184] [drm:dpu_encoder_frame_done_timeout:2095] [dpu error]enc31 frame done timeout
- [ 10.004783] [drm:dpu_crtc_frame_event_work [msm]] crtc65 event:2 ts:10002678537
- [ 10.010891] msm ae00000.mdss: fb0: msmdrmfb frame buffer device
- [ OK ] Started Load/Save RF Kill Switch[ 12.795019] Status.
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement