Advertisement
Guest User

Untitled

a guest
Jun 21st, 2025
18
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 3.27 KB | None | 0 0
  1. /dev/sda:
  2.  
  3. ATA device, with non-removable media
  4. Model Number: WDC WD50NDZW-11A8JS1
  5. Serial Number: WD-WX62DA00UDD2
  6. Firmware Revision: 01.01A01
  7. Transport: Serial, SATA 1.0a, SATA II Extensions, SATA Rev 2.5, SATA Rev 2.6, SATA Rev 3.0
  8. Standards:
  9. Used: unknown (minor revision code 0x006d)
  10. Supported: 10 9 8 7 6 5
  11. Likely used: 10
  12. Configuration:
  13. Logical max current
  14. cylinders 16383 0
  15. heads 16 0
  16. sectors/track 63 0
  17. --
  18. LBA user addressable sectors: 268435455
  19. LBA48 user addressable sectors: 9767475632
  20. Logical Sector size: 512 bytes
  21. Physical Sector size: 4096 bytes
  22. Logical Sector-0 offset: 0 bytes
  23. device size with M = 1024*1024: 4769275 MBytes
  24. device size with M = 1000*1000: 5000947 MBytes (5000 GB)
  25. cache/buffer size = unknown
  26. Form Factor: 2.5 inch
  27. Nominal Media Rotation Rate: 5400
  28. Capabilities:
  29. LBA, IORDY(can be disabled)
  30. Queue depth: 32
  31. Standby timer values: spec'd by Standard, with device specific minimum
  32. R/W multiple sector transfer: Max = 16 Current = 0
  33. Advanced power management level: 128
  34. DMA: *mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 udma5 udma6
  35. Cycle time: min=120ns recommended=120ns
  36. PIO: pio0 pio1 pio2 pio3 pio4
  37. Cycle time: no flow control=120ns IORDY flow control=120ns
  38. Commands/features:
  39. Enabled Supported:
  40. * SMART feature set
  41. Security Mode feature set
  42. * Power Management feature set
  43. * Write cache
  44. * Look-ahead
  45. * WRITE_BUFFER command
  46. * READ_BUFFER command
  47. * NOP cmd
  48. * DOWNLOAD_MICROCODE
  49. * Advanced Power Management feature set
  50. Power-Up In Standby feature set
  51. * SET_FEATURES required to spinup after power up
  52. * 48-bit Address feature set
  53. * Mandatory FLUSH_CACHE
  54. * FLUSH_CACHE_EXT
  55. * SMART error logging
  56. * SMART self-test
  57. * General Purpose Logging feature set
  58. * 64-bit World wide name
  59. * IDLE_IMMEDIATE with UNLOAD
  60. * {READ,WRITE}_DMA_EXT_GPL commands
  61. * Segmented DOWNLOAD_MICROCODE
  62. * Gen1 signaling speed (1.5Gb/s)
  63. * Gen2 signaling speed (3.0Gb/s)
  64. * Gen3 signaling speed (6.0Gb/s)
  65. * Native Command Queueing (NCQ)
  66. * Phy event counters
  67. * Idle-Unload when NCQ is active
  68. * NCQ priority information
  69. * READ_LOG_DMA_EXT equivalent to READ_LOG_EXT
  70. DMA Setup Auto-Activate optimization
  71. Software settings preservation
  72. * SMART Command Transport (SCT) feature set
  73. * SCT Write Same (AC2)
  74. * SCT Features Control (AC4)
  75. * SCT Data Tables (AC5)
  76. unknown 206[7]
  77. unknown 206[12] (vendor specific)
  78. unknown 206[13] (vendor specific)
  79. * Device encrypts all user data
  80. * DOWNLOAD MICROCODE DMA command
  81. * WRITE BUFFER DMA command
  82. * READ BUFFER DMA command
  83. * Data Set Management TRIM supported (limit 255 blocks)
  84. * Deterministic read data after TRIM
  85. Security:
  86. Master password revision code = 48059
  87. supported
  88. not enabled
  89. not locked
  90. not frozen
  91. not expired: security count
  92. supported: enhanced erase
  93. 886min for SECURITY ERASE UNIT. 2min for ENHANCED SECURITY ERASE UNIT.
  94. Logical Unit WWN Device Identifier: 50014ee2be2983c9
  95. NAA : 5
  96. IEEE OUI : 0014ee
  97. Unique ID : 2be2983c9
  98. Checksum: correct
  99.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement