homewizardSwitchboard.py

import sys
import time
import pushover
import ConfigParser
import os.path
import inspect
import math
import homewizardapi
from datetime import datetime, timedelta

# Variables
localTime  = datetime.now()
localDate  = localTime.strftime('%Y-%m-%d')

# Create HomeWizard Object
homewizard = homewizardapi.HomeWizard()

# Read HW Config
hwConfigRead = homewizard.readconfig()

print 'ConfigRead: ' + str(hwConfigRead)

# Handshake
if hwConfigRead:
   hwHandshake = homewizard.handshake()
else:
   hwHandshake = False

print 'Handshake : ' + str(hwHandshake)

# GetStatus
if hwHandshake:
   getStatusSuccess = homewizard.getStatus()
else:
   getStatusSuccess = False

# Exit if error
if not getStatusSuccess:
   sys.exit(-1)

# Config
config = ConfigParser.ConfigParser(allow_no_value=True)

sourcePath = os.path.dirname(inspect.getsourcefile(homewizard.todayAt))
hwConfigFile = os.path.join(sourcePath,'homewizard.cfg')

if not os.path.isfile(hwConfigFile):
   print 'ERROR: You need a homewizard.cfg file'
   sys.exit(-1)

config.read(hwConfigFile)

hwMotionLiving           = config.getint('HomeWizard', 'hwMotionLiving')
hwMotionKitchen          = config.getint('HomeWizard', 'hwMotionKitchen')
hwSensorDusk             = config.getint('HomeWizard', 'hwSensorDusk')
hwContactBalcony         = config.getint('HomeWizard', 'hwContactBalcony')
hwThermoOutside          = config.getint('HomeWizard', 'hwThermoOutside')
hwSwitchLights           = config.getint('HomeWizard', 'hwSwitchLights')
hwSwitchCurtains         = config.getint('HomeWizard', 'hwSwitchCurtains')
hwSwitchKitchen1         = config.getint('HomeWizard', 'hwSwitchKitchen1')
hwSwitchKitchen2         = config.getint('HomeWizard', 'hwSwitchKitchen2')
timeTriggered            = config.get('HomeWizard', 'timeTriggered')
lowerThermostatTriggered = config.getboolean('HomeWizard', 'lowerThermostatTriggered')

# Retrieve HomeWizard Status

# Motion Living
sensorMotionLivingSuccess, sensorMotionLivingStatus, sensorMotionLivingTimeStr, sensorMotionLivingDateTime = homewizard.sensorStatus(hwMotionLiving)
# Motion Kitchen
sensorMotionKitchenSuccess, sensorMotionKitchenStatus, sensorMotionKitchenTimeStr, sensorMotionKitchenDateTime = homewizard.sensorStatus(hwMotionKitchen)
# Sensor Dusk
sensorDuskSuccess, sensorDuskStatus,sensorDuskTimeStr, sensorDuskDateTime = homewizard.sensorStatus(hwSensorDusk)
# Contact Balcony
contactBalconySuccess, contactBalconyStatus,contactBalconyTimeStr, contactBalconyDateTime = homewizard.sensorStatus(hwContactBalcony)
# Thermometer Outside
thermoOutsideSuccess, thermoOutsideTemp = homewizard.thermoGetTemp(hwThermoOutside)
# HeatLink
hlSuccess, hlRoomTemp, hlTempHeatlink, hlTempThermostat = homewizard.heatlinkGetTemp()
# SwitchStatus Livingroom Lights
switchLightsSuccess, switchLightsStatus = homewizard.switchStatus(hwSwitchLights)
# SwitchStatus Livingroom Curtains
switchCurtainsSuccess, switchCurtainsStatus = homewizard.switchStatus(hwSwitchCurtains)
# SwitchStatus Kitchen Spots
switchKitchen1Success, switchKitchen1Status = homewizard.switchStatus(hwSwitchKitchen1)
# SwitchStatus Kitchen Ceiling
switchKitchen2Success, switchKitchen2Status = homewizard.switchStatus(hwSwitchKitchen2)

# PushOver
poConfigRead = pushover.readconfig()

###################################
# Switch LivingRoom Lights/Curtains
###################################

# Get Previous Time Triggered
if timeTriggered=='':
   timeTriggered = datetime(1901,1,1,0,0,0,0)
else:
   timeTriggered = datetime.strptime(timeTriggered,'%Y-%m-%d %H:%M:%S.%f')

# Check status
alreadyTriggered     = (localTime - timeTriggered) < timedelta(hours=10)
inTimeWindow         = localTime > homewizard.todayAt(16,0,0)

sensorMotionLivingDetected = sensorMotionLivingTimeStr <> '00:00' and (localTime - sensorMotionLivingDateTime) < timedelta(minutes=30)

triggerSwitches      = sensorDuskStatus and inTimeWindow and not alreadyTriggered
triggerLights        = triggerSwitches and sensorMotionDetected and not switchLightsStatus
triggerCurtains      = triggerSwitches and not switchCurtainsStatus

# Lights
if triggerLights:
   # Notify
   pushover.notify('Woonkamer: Licht aan / rolgordijn naar beneden',
                   'Uitgevoerd op: ' + datetime.strftime(localTime,'%Y-%m-%d %H:%M:%S') + '\n' +
                   'Schemer gedetecteerd: ' + str(sensorDuskTimeStr),
                   0,
                   'magic',
                   '',
                   '')
   # LightsOn
   homewizard.switchOn(hwSwitchLights)

# Curtains
if triggerCurtains:
   homewizard.switchOn(hwSwitchCurtains)

# Write Config
if  (triggerSwitches and sensorMotionDetected):
    config.set('HomeWizard', 'timeTriggered', localTime)
    with open(hwConfigFile, 'wb') as configfile:
        config.write(configfile)

########################################################
# Lower Thermostat temperature if balcony door is opened
########################################################

# Current Temperature
if (hlTempHeatlink > 0):
   currentTemperature = hlTempHeatlink
else:
   currentTemperature = hlTempThermostat

# New Temperature
newTemperature  = math.floor(thermoOutsideTemp)-1

# Lower Thermostat?
contactBalconyOpen = contactBalconyStatus and (localTime - contactBalconyDateTime) > timedelta(minutes=2)

lowerThermostat = contactBalconyOpen and (thermoOutsideTemp < hlTempThermostat or thermoOutsideTemp < hlRoomTemp) and hlTempHeatlink <> newTemperature
resetThermostat = not contactBalconyStatus and hlTempHeatlink>0 and lowerThermostatTriggered

if (lowerThermostat):
   # Set Temperature
   homewizard.heatlinkSetTemp(newTemperature,0)

   # PushOverNotification
   if (not lowerThermostatTriggered):
      poSuccess = pushover.notify('Thermostaat bijgesteld',
                                  'Uitgevoerd op: ' + datetime.strftime(localTime,'%Y-%m-%d %H:%M:%S') + '\n' +
                                  'Balkondeur open: ' + str(contactBalconyTimeStr) + '\n' +
                                  'Temperatuur gewijzigd van ' + str(currentTemperature) + ' in ' + str(newTemperature) + ' graden\n' +
                                  'Buiten temperatuur: ' + str(thermoOutsideTemp),
                                  0,
                                  'magic',
                                  '',
                                  '')
elif (resetThermostat):
   # Reset Thermostat
   homewizard.heatlinkSetTemp(0,0)

   # PushOver Notification
   poSuccess = pushover.notify('Thermostaat override uitgeschakeld',
                               'Uitgevoerd op: ' + datetime.strftime(localTime,'%Y-%m-%d %H:%M:%S') + '\n' +
                               'Balkondeur gesloten: ' + str(contactBalconyTimeStr),
                               0,
                               'magic',
                               '',
                               '')

# Write Config
if (lowerThermostat or resetThermostat):
   config.set('HomeWizard', 'lowerThermostatTriggered', lowerThermostat and not resetThermostat)
   with open(hwConfigFile, 'wb') as configfile:
        config.write(configfile)

###########################
# Switch Off Kitchen Lights
###########################

sensorMotionKitchenNotDetected = sensorMotionKitchenTimeStr <> '00:00' and (localTime - sensorMotionKitchenDateTime) > timedelta(minutes=10)

if (sensorMotionKitchenNotDetected and switchKitchen1Status):
   homewizard.switchOff(hwSwitchKitchen1)
   time.sleep(2)

if (sensorMotionKitchenNotDetected and switchKitchen2Status):
   homewizard.switchOff(hwSwitchKitchen2)

#########
# Logging
#########

print 'Start : ' + str(localTime)
print 'End   : ' + str(datetime.now())
print
print '================================='
print 'Switch Livingroom Lights/Curtain:'
print '================================='
print 'Local Time       : ' + str(localTime)
print 'In Time Window   : ' + str(inTimeWindow)
print 'Time Triggered   : ' + str(timeTriggered)
print 'Already Triggered: ' + str(alreadyTriggered)
print
print 'Motion Detected  : ' + str(sensorMotionLivingDetected)
print 'Dusk Detected    : ' + str(sensorDuskStatus)
print
print 'Trigger Switches : ' + str(triggerSwitches)
print 'Trigger Lights   : ' + str(triggerLights)
print 'Trigger Curtains : ' + str(triggerCurtains)
print
print '====================================='
print 'Lower thermostat if balconydoor open:'
print '====================================='
print 'Balconydoor Status    : ' + str(contactBalconyStatus)
print 'Balconydoor Time      : ' + str(contactBalconyTimeStr)
print 'Balconydoor Open      : ' + str(contactBalconyOpen)
print 'Outside temperature   : ' + str(thermoOutsideTemp)
print 'Room temperature      : ' + str(hlRoomTemp)
print 'Thermostat temperature: ' + str(hlTempThermostat)
print 'HeatLink temperature  : ' + str(hlTempHeatlink)
print 'New temperature       : ' + str(newTemperature)
print 'Lower Thermostat      : ' + str(lowerThermostat)
print 'Triggered             : ' + str(lowerThermostatTriggered)
print
print '====================================='
print 'Switch off Kitchen Lights:'
print '====================================='
print 'Motion Detected  : ' + str(sensorMotionKitchenTimeStr)
print 'Switch off lights: ' + str(sensorMotionKitchenNotDetected and (switchKitchen1Status or switchKitchen2Status))
print 'Lights Spots     : ' + str(switchKitchen1Status)
print 'Lights Ceiling   : ' + str(switchKitchen2Status)
print