2017-07-21 01:20:35  ★ Skyler Scaletta takes a big car jack with both of her hands and starts pushing it towards the van.
2017-07-21 01:21:54  ★ The van would be located next to a wall on the far right of the garage.      ((Skyler Scaletta))
2017-07-21 01:22:40  ★ Skyler Scaletta takes the car jack and pushes it under the main axle of the van.
2017-07-21 01:24:07  ★ Skyler Scaletta starts lifting the car using the car jack.
2017-07-21 01:24:45  ★ she would operate the jack with both her hands.      ((Skyler Scaletta))
2017-07-21 01:25:36  ★ Skyler Scaletta walks towards her toolbox taking out her utility belt.
2017-07-21 01:26:09  ★ Skyler Scaletta puts on her utility belt strapping it on.
2017-07-21 01:27:07  ★ There would be a big toolbox in the top right corner of the garage.      ((Skyler Scaletta))
2017-07-21 01:28:30  ★ Skyler Scaletta slowly walks towards the toolbox, opening it and taking out a electric rattlegun.
2017-07-21 01:28:58  ★ Skyler Scaletta puts the rattlegun onto her utility belt.
2017-07-21 01:29:49  ★ On her utilyti belt there would be a rattlegun, a set of screwdrivers and a set of wrenches.      ((Skyler Scaletta))
2017-07-21 01:31:03  ★ Skyler Scaletta bends over taking 2 car  stands for each of the wheels.
2017-07-21 01:31:42  ★ Skyler Scaletta takes the car stands 1 in the left hand and the other in her right hand.
2017-07-21 01:32:40  ★ Skyler Scaletta locks the front wheels with 2 wooden board that she found next to the trash.
2017-07-21 01:33:30  ★ Skyler Scaletta puts the car stands on the back side od the van, slowly putting then each on another side.
2017-07-21 01:34:27  ★ The van would be only lifted from the back, the front would still be on the ground.      ((Skyler Scaletta))
2017-07-21 01:35:23  ★ Skyler Scaletta walks towards the bottom left car wheel, sitting next to it.
2017-07-21 01:36:31  ★ Skyler Scaletta takes her rattlegun turning it on with her left hand.
2017-07-21 01:36:48  ★ She would be holding the rattlegun in her right hand.      ((Skyler Scaletta))
2017-07-21 01:37:51  ★ Skyler Scaletta start unscrewing the 5 bolts that hold the wheel to the axle.
2017-07-21 01:38:25  ★ Skyler Scaletta puts the rattlegun on the left side, taking the wheel out with both her hands.
2017-07-21 01:39:07  ★ Skyler Scaletta puts the wheel on her right side.
2017-07-21 01:39:49  ★ Skyler Scaletta takes out a 15mm wrench from her belt.
2017-07-21 01:40:42  ★ Skyler Scaletta starts unscrewing the 2 bolts holding the spring to the axle.
2017-07-21 01:41:15  ★ She would be doing it with both her hands because they are very tight.      ((Skyler Scaletta))
2017-07-21 01:43:28  ★ Skyler Scaletta takes out the shock and spring setting it aside.
2017-07-21 01:43:47  ★ Skyler Scaletta gets up and satrts walking towards the toolbox.
2017-07-21 01:44:31  ★ Skyler Scaletta takes a set of spring compressors out of the box , putting them into her left hand.
2017-07-21 01:45:17  ★ Skyler Scaletta takes out an angle grinder with her right hand.
2017-07-21 01:46:38  ★ Skyler Scaletta walks back to the place she left the shock and spring, leaning down puting the grinder.....
2017-07-21 01:47:00  ★ Skyler Scaletta and the compressors down.
2017-07-21 01:48:15  ★ Skyler Scaletta goes back to the toobox taking out a extension cord and plugging it in.
2017-07-21 01:48:54  ★ Skyler Scaletta pulls the extension cord back to the van plugging the grinder in.
2017-07-21 01:49:44  ★ Skyler Scaletta sits back down putting the shock and spring on her lap.
2017-07-21 01:50:11  ★ Skyler Scaletta takes the spring compessors and puts them on the spring.
2017-07-21 01:50:58  ★ Skyler Scaletta tightens the spring with her rattlegun.
2017-07-21 01:51:33  ★ Skyler Scaletta takes the shock and spring in her left hand leaning n onto her left leg.
2017-07-21 01:52:04  ★ Skyler Scaletta unscrews the nut that holds the shock and spring together.
2017-07-21 01:53:03  ★ Skyler Scaletta puts down the rattlegun and takes the spring in her hand.
2017-07-21 01:53:38  ★ Sykler wouldnt seem exhausted because the job isnt hard.      ((Skyler Scaletta))
2017-07-21 01:54:12  ★ Skyler Scaletta takes the spring mesuring 2 inches from the top op the spring.
2017-07-21 01:55:11  ★ Skyler Scaletta takes a marker that is hanging on her T-shirt marking a spot 2 inches from the top of the...
2017-07-21 01:55:17  ★ Skyler Scaletta spring.
2017-07-21 01:55:38  ★ Skyler Scaletta takes the grinder and turnes it on.
2017-07-21 01:56:03  ★ Skyler Scaletta turns of the grinder.
2017-07-21 01:56:17   [English] Skyler Scaletta says: Of, course protection.
2017-07-21 01:57:11  ★ Skyler Scaletta puts the grinder aside taking a pair of hard working gloves and safety glasses.
2017-07-21 01:57:24  ★ Skyler Scaletta puts the gloves and the glasses on.
2017-07-21 01:57:48  ★ Skyler Scaletta takes the spring in her left and the grinder in her right hand.
2017-07-21 01:58:19  ★ Skyler Scaletta turns the grinder on cutting the spring where she marked it.
2017-07-21 01:59:19  ★ the cut would be almost perfect a little bad on the end.      ((Skyler Scaletta))
2017-07-21 02:00:00  ★ Skyler Scaletta grinds the spring where she cut it to make it smooth.
2017-07-21 02:00:22  ★ Skyler Scaletta puts the spring into the shock tightening the nut.
2017-07-21 02:00:59  ★ Skyler Scaletta puts the shock and spring back on tightening the 2 nuts with 15mm wrenches.
2017-07-21 02:01:50  ★ Skyler Scaletta puts the wheel back on tightening the 5 screws back on with the rattlegun.
2017-07-21 16:39:06  ★ Skyler Scaletta moves all her tools to the back right tire of the van.
2017-07-21 16:39:35  ★ Skyler Scaletta turns on her rattlegun with her right hand.
2017-07-21 16:40:01  ★ Skyler Scaletta starts unscrewing the 5 nuts on the right back wheel
2017-07-21 16:40:33  ★ Skyler Scaletta puts the rattlegun down taking the wheel of putting it aside.
2017-07-21 16:41:10  ★ Skyler Scaletta unscrews the 2 15mm nuts that hold the shock and spring to the axle.
2017-07-21 16:41:29  ★ Skyler Scaletta takes out the shock and spring out putting it aside.
2017-07-21 16:42:21  ★ Skyler Scaletta takes her spring compressors tightening them to the spring.
2017-07-21 16:43:06  ★ Skyler Scaletta takes the top off that holds the shock and spring together.
2017-07-21 16:43:32  ★ Skyler Scaletta removes the spring from the shock with her right hand.
2017-07-21 16:43:49  ★ Skyler Scaletta puts the shock aside taking the spring in her left hand.
2017-07-21 16:44:02  ★ The angle grinder would be turned off.      ((Skyler Scaletta))
2017-07-21 16:44:51  ★ Skyler Scaletta takes a black marker in her right hand marking 2 inches from the top of the spring.
2017-07-21 16:45:21  ★ Skyler Scaletta puts her safety glasses and gloves on.
2017-07-21 16:45:45  ★ Skyler Scaletta turns on the angle grinder cutting the spring where she marked it.
2017-07-21 16:45:56  ★ Skyler Scaletta tunes off the angle grinder.
2017-07-21 16:46:18  ★ The cut would be very clean.      ((Skyler Scaletta))
2017-07-21 16:47:00  ★ Skyler Scaletta puts the shock and spring back together screwing the top with her rattlegun.
2017-07-21 16:47:38  ★ Skyler Scaletta puts the shock and spring in the place screwing it with a 15mm bolt.
2017-07-21 16:48:12  ★ Skyler Scaletta puts a nut on the end of the 15mm screw.
2017-07-21 16:48:26  ★ the spring would be 2 inches smaller.      ((Skyler Scaletta))
2017-07-21 16:48:56  ★ Skyler Scaletta puts the wheel back on tightening the 5 screws back in the place.
2017-07-21 16:49:28  ★ Skyler Scaletta removes the car stands and lowers the van
2017-07-21 16:50:06  ★ Skyler Scaletta moves all her tools to the front right tire of the van.
2017-07-21 16:50:40  ★ Skyler Scaletta moves the car jack onto the front of the van lifting the front of the van.
2017-07-21 16:51:01  ★ Skyler Scaletta puts 2 car stands one at each side of the van.
2017-07-21 16:51:42  ★ Skyler Scaletta sits next to the front right tire of the van.
2017-07-21 16:52:05  ★ Skyler Scaletta turns on her rattlegun with her right hand.
2017-07-21 16:52:39  ★ Skyler Scaletta starts unscrewing the 5 nuts on the front right wheel
2017-07-21 16:52:59  ★ Skyler Scaletta puts the rattlegun down taking the wheel of putting it aside.
2017-07-21 16:53:10  ★ Skyler Scaletta unscrews the 2 15mm nuts that hold the shock and spring to the axle.
2017-07-21 16:53:37  ★ Skyler Scaletta takes out the shock and spring out putting it aside.
2017-07-21 16:53:50  ★ Skyler Scaletta takes her spring compressors tightening them to the spring.
2017-07-21 16:53:58  ★ Skyler Scaletta takes the top off that holds the shock and spring together.
2017-07-21 16:54:05  ★ Skyler Scaletta removes the spring from the shock with her right hand.
2017-07-21 16:54:30  ★ Skyler Scaletta puts the shock aside taking the spring in her left hand.
2017-07-21 16:54:58  ★ The angle grinder would be turned off.      ((Skyler Scaletta))
2017-07-21 16:55:01  ★ Skyler Scaletta takes a black marker in her right hand marking 2 inches from the top of the spring.
2017-07-21 16:55:21  ★ Skyler Scaletta puts her safety glasses and gloves on.
2017-07-21 16:55:45  ★ Skyler Scaletta turns on the angle grinder cutting the spring where she marked it.
2017-07-21 16:55:57  ★ Skyler Scaletta tunes off the angle grinder.
2017-07-21 16:56:01  ★ The cut would be clean.      ((Skyler Scaletta))
2017-07-21 16:56:21  ★ Skyler Scaletta puts the shock and spring back together screwing the top with her rattlegun.
2017-07-21 16:57:02  ★ Skyler Scaletta puts the shock and spring in the place screwing it with a 15mm bolt.
2017-07-21 16:57:30  ★ Skyler Scaletta puts a nut on the end of the 15mm screw.
2017-07-21 16:57:37  ★ the spring would be 2 inches smaller.      ((Skyler Scaletta))
2017-07-21 16:57:58  ★ Skyler Scaletta puts the wheel back on screwing the 5 nuts in the place.
2017-07-21 16:58:06  ★ Skyler Scaletta moves all her tools to the front left tire of the van.
2017-07-21 16:58:34  ★ Skyler Scaletta turns on her rattlegun with her right hand.
2017-07-21 16:58:49  ★ Skyler Scaletta starts unscrewing the 5 nuts on the front left wheel.
2017-07-21 16:59:01  ★ Skyler Scaletta puts the rattlegun down taking the wheel of putting it aside.
2017-07-21 16:59:36  ★ Skyler Scaletta unscrews the 2 15mm nuts that hold the shock and spring to the axle.
2017-07-21 16:59:54  ★ Skyler Scaletta takes out the shock and spring out putting it aside.
2017-07-21 17:00:02  ★ Skyler Scaletta takes her spring compressors tightening them to the spring.
2017-07-21 17:00:52  ★ Skyler Scaletta takes the top off that holds the shock and spring together.
2017-07-21 17:01:02  ★ Skyler Scaletta removes the spring from the shock with her right hand.
2017-07-21 17:01:45  ★ Skyler Scaletta puts the shock aside taking the spring in her left hand.
2017-07-21 17:01:58  ★ The angle grinder would be turned off.      ((Skyler Scaletta))
2017-07-21 17:02:04  ★ Skyler Scaletta takes a black marker in her right hand marking 2 inches from the top of the spring.
2017-07-21 17:02:21  ★ Skyler Scaletta puts her safety glasses and gloves on.
2017-07-21 17:02:45  ★ Skyler Scaletta turns on the angle grinder cutting the spring where she marked it.
2017-07-21 17:04:21  ★ Skyler Scaletta tunes off the angle grinder.
2017-07-21 17:04:40  ★ The cut would be pretty clean.      ((Skyler Scaletta))
2017-07-21 17:04:56  ★ Skyler Scaletta puts the shock and spring back together screwing the top with her rattlegun.
2017-07-21 17:07:10  ★ Skyler Scaletta puts the shock and spring in the place screwing it with a 15mm bolt.
2017-07-21 17:07:43  ★ Skyler Scaletta puts a nut on the end of the 15mm screw.
2017-07-21 17:07:59  ★ the spring would be 2 inches smaller.      ((Skyler Scaletta))
2017-07-21 17:08:06  ★ Skyler Scaletta puts the wheel back on with both hands, screwing the 5 nuts in the place.
2017-07-21 17:08:35  ★ Skyler Scaletta removes the car stands and lowers the van.