API tools faq
paste
Trillien

GL-AR300M NAND Kernel log (with issue)

Trillien
Feb 18th, 2022 (edited)
293
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.14 KB | None | 0 0
raw download clone embed print report
  1. [ 0.000000] Linux version 4.14.241 (glinet@ubuntu) (gcc version 7.5.0 (OpenWrt GCC 7.5.0 r11257-5090152ae3)) #0 Thu Jul 29 19:50:28 2021
  2. [ 0.000000] bootconsole [early0] enabled
  3. [ 0.000000] CPU0 revision is: 00019374 (MIPS 24Kc)
  4. [ 0.000000] MIPS: machine is GL.iNet GL-AR300M (NAND)
  5. [ 0.000000] SoC: Qualcomm Atheros QCA9533 ver 2 rev 0
  6. [ 0.000000] Determined physical RAM map:
  7. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  8. [ 0.000000] Initrd not found or empty - disabling initrd
  9. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  10. [ 0.000000] Primary data cache 32kB, 4-way, VIPT, cache aliases, linesize 32 bytes
  11. [ 0.000000] Zone ranges:
  12. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
  13. [ 0.000000] Movable zone start for each node
  14. [ 0.000000] Early memory node ranges
  15. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
  16. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
  17. [ 0.000000] On node 0 totalpages: 32768
  18. [ 0.000000] free_area_init_node: node 0, pgdat 805e7ca0, node_mem_map 81007b80
  19. [ 0.000000] Normal zone: 256 pages used for memmap
  20. [ 0.000000] Normal zone: 0 pages reserved
  21. [ 0.000000] Normal zone: 32768 pages, LIFO batch:7
  22. [ 0.000000] random: get_random_bytes called from start_kernel+0x98/0x494 with crng_init=0
  23. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  24. [ 0.000000] pcpu-alloc: [0] 0
  25. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
  26. [ 0.000000] Kernel command line: console=ttyS0,115200n8 rootfstype=squashfs,jffs2
  27. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  28. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  29. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  30. [ 0.000000] Writing ErrCtl register=00000000
  31. [ 0.000000] Readback ErrCtl register=00000000
  32. [ 0.000000] Memory: 122340K/131072K available (4485K kernel code, 155K rwdata, 1016K rodata, 1244K init, 218K bss, 8732K reserved, 0K cma-reserved)
  33. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  34. [ 0.000000] NR_IRQS: 51
  35. [ 0.000000] CPU clock: 650.000 MHz
  36. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 5880801374 ns
  37. [ 0.000009] sched_clock: 32 bits at 325MHz, resolution 3ns, wraps every 6607641598ns
  38. [ 0.008256] Calibrating delay loop... 432.53 BogoMIPS (lpj=2162688)
  39. [ 0.074862] pid_max: default: 32768 minimum: 301
  40. [ 0.079938] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  41. [ 0.086910] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  42. [ 0.098708] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  43. [ 0.109127] futex hash table entries: 256 (order: -1, 3072 bytes)
  44. [ 0.115657] pinctrl core: initialized pinctrl subsystem
  45. [ 0.122410] NET: Registered protocol family 16
  46. [ 0.134882] PCI host bridge /ahb/pcie-controller@180c0000 ranges:
  47. [ 0.141375] MEM 0x0000000010000000..0x0000000013ffffff
  48. [ 0.146874] IO 0x0000000000000000..0x0000000000000000
  49. [ 0.152389] ar724x-pci 180c0000.pcie-controller: PCIe link is down
  50. [ 0.176129] PCI host bridge to bus 0000:00
  51. [ 0.180466] pci_bus 0000:00: root bus resource [mem 0x10000000-0x13ffffff]
  52. [ 0.187768] pci_bus 0000:00: root bus resource [io 0x0000]
  53. [ 0.193635] pci_bus 0000:00: root bus resource [??? 0x00000000 flags 0x0]
  54. [ 0.200794] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  55. [ 0.209158] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
  56. [ 0.211855] clocksource: Switched to clocksource MIPS
  57. [ 0.218244] NET: Registered protocol family 2
  58. [ 0.223110] IP idents hash table entries: 2048 (order: 2, 16384 bytes)
  59. [ 0.230682] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  60. [ 0.238101] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  61. [ 0.244824] TCP: Hash tables configured (established 1024 bind 1024)
  62. [ 0.251680] UDP hash table entries: 256 (order: 0, 4096 bytes)
  63. [ 0.257897] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  64. [ 0.264809] NET: Registered protocol family 1
  65. [ 0.269429] PCI: CLS 0 bytes, default 32
  66. [ 0.272500] Crashlog allocated RAM at address 0x3f00000
  67. [ 0.279353] workingset: timestamp_bits=30 max_order=15 bucket_order=0
  68. [ 0.291326] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  69. [ 0.297525] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  70. [ 0.318787] io scheduler noop registered
  71. [ 0.322979] io scheduler deadline registered (default)
  72. [ 0.330550] pinctrl-single 1804002c.pinmux: 576 pins at pa b804002c size 72
  73. [ 0.338470] gpio-export gpio-export: 1 gpio(s) exported
  74. [ 0.344744] Serial: 8250/16550 driver, 16 ports, IRQ sharing enabled
  75. [ 0.353870] console [ttyS0] disabled
  76. [ 0.357676] 18020000.uart: ttyS0 at MMIO 0x18020000 (irq = 9, base_baud = 1562500) is a 16550A
  77. [ 0.366824] console [ttyS0] enabled
  78. [ 0.374377] bootconsole [early0] disabled
  79. [ 0.401452] m25p80 spi0.0: w25q128 (16384 Kbytes)
  80. [ 0.406412] 4 fixed-partitions partitions found on MTD device spi0.0
  81. [ 0.412992] Creating 4 MTD partitions on "spi0.0":
  82. [ 0.417951] 0x000000000000-0x000000040000 : "u-boot"
  83. [ 0.423914] 0x000000040000-0x000000050000 : "u-boot-env"
  84. [ 0.430169] 0x000000050000-0x000000ff0000 : "reserved"
  85. [ 0.436336] 0x000000ff0000-0x000001000000 : "art"
  86. [ 0.445057] spi-nand: Giga SPI NAND was found.
  87. [ 0.449660] spi-nand: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 128
  88. [ 0.457648] 2 fixed-partitions partitions found on MTD device spi0.1
  89. [ 0.464235] Creating 2 MTD partitions on "spi0.1":
  90. [ 0.469192] 0x000000000000-0x000000400000 : "kernel"
  91. [ 0.482300] 0x000000400000-0x000008000000 : "ubi"
  92. [ 0.933084] found bad block 7fe0000
  93. [ 0.937425] libphy: Fixed MDIO Bus: probed
  94. [ 1.282963] ag71xx 19000000.eth: Could not connect to PHY device. Deferring probe.
  95. [ 1.962249] libphy: ag71xx_mdio: probed
  96. [ 2.252323] mdio-bus.0:1f: Found an AR934X built-in switch
  97. [ 2.258170] libphy: ar7240sw_mdio: probed
  98. [ 2.319504] ag71xx 1a000000.eth: connected to PHY at fixed-0:00 [uid=00000000, driver=Generic PHY]
  99. [ 2.329428] eth1: Atheros AG71xx at 0xba000000, irq 5, mode: gmii
  100. [ 2.337797] NET: Registered protocol family 10
  101. [ 2.347157] Segment Routing with IPv6
  102. [ 2.351042] NET: Registered protocol family 17
  103. [ 2.355745] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  104. [ 2.369149] 8021q: 802.1Q VLAN Support v1.8
  105. [ 2.561854] random: fast init done
  106. [ 2.714045] ag71xx 19000000.eth: connected to PHY at mdio-bus.0:1f:04 [uid=004dd042, driver=Generic PHY]
  107. [ 2.724748] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode: mii
  108. [ 2.734479] UBI: auto-attach mtd5
  109. [ 2.737939] ubi0: attaching mtd5
  110. [ 6.922610] ubi0: scanning is finished
  111. [ 6.973708] ubi0 warning: ubi_eba_init: cannot reserve enough PEBs for bad PEB handling, reserved 3, need 19
  112. [ 6.985169] ubi0: attached mtd5 (name "ubi", size 124 MiB)
  113. [ 6.990845] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
  114. [ 6.997994] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
  115. [ 7.005011] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  116. [ 7.012204] ubi0: good PEBs: 991, bad PEBs: 1, corrupted PEBs: 0
  117. [ 7.018403] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
  118. [ 7.025874] ubi0: max/mean erase counter: 3/1, WL threshold: 4096, image sequence number: 556058055
  119. [ 7.035229] ubi0: available PEBs: 0, total reserved PEBs: 991, PEBs reserved for bad PEB handling: 3
  120. [ 7.044754] ubi0: background thread "ubi_bgt0d" started, PID 327
  121. [ 7.054288] block ubiblock0_0: created from ubi0:0(rootfs)
  122. [ 7.059963] ubiblock: device ubiblock0_0 (rootfs) set to be root filesystem
  123. [ 7.085819] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
  124. [ 7.100825] Freeing unused kernel memory: 1244K
  125. [ 7.105548] This architecture does not have kernel memory protection.
  126. [ 8.047860] init: Console is alive
  127. [ 8.051621] init: - watchdog -
  128. [ 11.442765] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  129. [ 11.672987] usbcore: registered new interface driver usbfs
  130. [ 11.678719] usbcore: registered new interface driver hub
  131. [ 11.684357] usbcore: registered new device driver usb
  132. [ 11.699884] exFAT: Version 1.2.9
  133. [ 11.739764] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  134. [ 11.756805] SCSI subsystem initialized
  135. [ 11.766545] ehci-platform: EHCI generic platform driver
  136. [ 11.772276] ehci-platform 1b000000.usb: EHCI Host Controller
  137. [ 11.778150] ehci-platform 1b000000.usb: new USB bus registered, assigned bus number 1
  138. [ 11.786382] ehci-platform 1b000000.usb: irq 3, io mem 0x1b000000
  139. [ 11.821906] ehci-platform 1b000000.usb: USB 2.0 started, EHCI 1.00
  140. [ 11.829180] hub 1-0:1.0: USB hub found
  141. [ 11.833492] hub 1-0:1.0: 1 port detected
  142. [ 11.841293] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  143. [ 11.849872] ohci-platform: OHCI generic platform driver
  144. [ 11.858040] uhci_hcd: USB Universal Host Controller Interface driver
  145. [ 12.158055] usbcore: registered new interface driver usb-storage
  146. [ 12.166840] usbcore: registered new interface driver uas
  147. [ 12.173223] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  148. [ 12.191185] init: - preinit -
  149. [ 13.603130] random: jshn: uninitialized urandom read (4 bytes read)
  150. [ 13.837099] random: jshn: uninitialized urandom read (4 bytes read)
  151. [ 13.896381] random: jshn: uninitialized urandom read (4 bytes read)
  152. [ 14.720532] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
  153. [ 15.783053] eth1: link up (1000Mbps/Full duplex)
  154. [ 15.787863] IPv6: ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  155. [ 18.082268] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 471
  156. [ 18.144293] urandom_read: 4 callbacks suppressed
  157. [ 18.144301] random: procd: uninitialized urandom read (4 bytes read)
  158. [ 18.352933] UBIFS (ubi0:1): recovery needed
  159. [ 19.028551] UBIFS (ubi0:1): recovery completed
  160. [ 19.033289] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
  161. [ 19.041372] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
  162. [ 19.051637] UBIFS (ubi0:1): FS size: 110596096 bytes (105 MiB, 871 LEBs), journal size 5586944 bytes (5 MiB, 44 LEBs)
  163. [ 19.062600] UBIFS (ubi0:1): reserved for root: 4952683 bytes (4836 KiB)
  164. [ 19.069430] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID CCE6ADF5-2782-482E-B4A7-61F995A33AA9, small LPT model
  165. [ 19.143844] mount_root: switching to ubifs overlay
  166. [ 19.283635] urandom-seed: Seeding with /etc/urandom.seed
  167. [ 19.562997] eth1: link down
  168. [ 19.578647] procd: - early -
  169. [ 19.581739] procd: - watchdog -
  170. [ 20.258408] random: jshn: uninitialized urandom read (4 bytes read)
  171. [ 20.336377] procd: - watchdog -
  172. [ 20.339956] procd: - ubus -
  173. [ 20.602073] random: ubusd: uninitialized urandom read (4 bytes read)
  174. [ 20.753393] procd: - init -
  175. [ 23.822921] kmodloader: loading kernel modules from /etc/modules.d/*
  176. [ 23.874969] ntfs: driver 2.1.32 [Flags: R/O MODULE].
  177. [ 23.915063] urngd: v1.0.2 started.
  178. [ 23.936115] tun: Universal TUN/TAP device driver, 1.6
  179. [ 23.994975] ip6_tables: (C) 2000-2006 Netfilter Core Team
  180. [ 24.035546] nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
  181. [ 24.336065] Netfilter messages via NETLINK v0.30.
  182. [ 24.363961] ip_set: protocol 6
  183. [ 24.477634] Mirror/redirect action on
  184. [ 24.489291] random: crng init done
  185. [ 24.524988] u32 classifier
  186. [ 24.527800] input device check on
  187. [ 24.531578] Actions configured
  188. [ 24.602493] GACT probability on
  189. [ 24.634886] Simple TC action Loaded
  190. [ 24.722303] fuse init (API version 7.26)
  191. [ 25.146432] usbcore: registered new interface driver cdc_acm
  192. [ 25.152354] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
  193. [ 25.197901] usbcore: registered new interface driver cdc_wdm
  194. [ 25.234034] Loading modules backported from Linux version v4.19.193-0-g1722257b8ece
  195. [ 25.242031] Backport generated by backports.git v4.19.193-1-0-gaa2cc8ea
  196. [ 25.303921] Ebtables v2.0 registered
  197. [ 25.319198] ip_tables: (C) 2000-2006 Netfilter Core Team
  198. [ 25.344061] usbcore: registered new interface driver ipheth
  199. [ 25.635290] ctnetlink v0.93: registering with nfnetlink.
  200. [ 26.089378] usbcore: registered new interface driver usbserial
  201. [ 26.095565] usbcore: registered new interface driver usbserial_generic
  202. [ 26.102453] usbserial: USB Serial support registered for generic
  203. [ 26.158551] wireguard: WireGuard 1.0.20200611 loaded. See www.wireguard.com for information.
  204. [ 26.167337] wireguard: Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
  205. [ 26.364825] xt_time: kernel timezone is -0000
  206. [ 26.390023] usbcore: registered new interface driver cdc_ether
  207. [ 26.426826] usbcore: registered new interface driver cdc_ncm
  208. [ 26.603816] usbcore: registered new interface driver cp210x
  209. [ 26.609640] usbserial: USB Serial support registered for cp210x
  210. [ 26.712295] usbcore: registered new interface driver huawei_cdc_ncm
  211. [ 26.972774] PPP generic driver version 2.4.2
  212. [ 26.997597] PPP MPPE Compression module registered
  213. [ 27.036626] NET: Registered protocol family 24
  214. [ 27.073895] usbcore: registered new interface driver qmi_wwan
  215. [ 27.103658] usbcore: registered new interface driver rndis_host
  216. [ 27.187259] usbcore: registered new interface driver sierra
  217. [ 27.193165] usbserial: USB Serial support registered for Sierra USB modem
  218. [ 27.238636] usbcore: registered new interface driver sierra_net
  219. [ 27.663547] usbcore: registered new interface driver option
  220. [ 27.669387] usbserial: USB Serial support registered for GSM modem (1-port)
  221. [ 27.788032] usbcore: registered new interface driver rt2800usb
  222. [ 27.849735] ath: EEPROM regdomain: 0x0
  223. [ 27.849745] ath: EEPROM indicates default country code should be used
  224. [ 27.849749] ath: doing EEPROM country->regdmn map search
  225. [ 27.849765] ath: country maps to regdmn code: 0x3a
  226. [ 27.849770] ath: Country alpha2 being used: US
  227. [ 27.849773] ath: Regpair used: 0x3a
  228. [ 27.863230] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  229. [ 27.865059] ieee80211 phy0: Atheros AR9531 Rev:2 mem=0xb8100000, irq=13
  230. [ 27.962450] kmodloader: done loading kernel modules from /etc/modules.d/*
  231. [ 47.180540] IPv6: ADDRCONF(NETDEV_UP): lo: link is not ready
  232. [ 48.612319] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  233. [ 48.652291] br-lan: port 1(eth0) entered blocking state
  234. [ 48.657701] br-lan: port 1(eth0) entered disabled state
  235. [ 48.663477] device eth0 entered promiscuous mode
  236. [ 48.723415] IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
  237. [ 48.732580] eth1: link up (1000Mbps/Full duplex)
  238. [ 48.774379] br-lan: port 2(eth1) entered blocking state
  239. [ 48.779790] br-lan: port 2(eth1) entered disabled state
  240. [ 48.785587] device eth1 entered promiscuous mode
  241. [ 48.790459] br-lan: port 2(eth1) entered blocking state
  242. [ 48.795906] br-lan: port 2(eth1) entered forwarding state
  243. [ 50.745013] eth0: link up (100Mbps/Full duplex)
  244. [ 50.749742] br-lan: port 1(eth0) entered blocking state
  245. [ 50.755191] br-lan: port 1(eth0) entered forwarding state
  246. [ 52.775978] ath: EEPROM regdomain: 0x80fa
  247. [ 52.780131] ath: EEPROM indicates we should expect a country code
  248. [ 52.786478] ath: doing EEPROM country->regdmn map search
  249. [ 52.791964] ath: country maps to regdmn code: 0x37
  250. [ 52.796912] ath: Country alpha2 being used: FR
  251. [ 52.801497] ath: Regpair used: 0x37
  252. [ 52.805113] ath: regdomain 0x80fa dynamically updated by user
  253. [ 58.713385] br-lan: port 3(wlan0) entered blocking state
  254. [ 58.718947] br-lan: port 3(wlan0) entered disabled state
  255. [ 58.724876] device wlan0 entered promiscuous mode
  256. [ 62.193430] br-lan: port 3(wlan0) entered blocking state
  257. [ 62.198932] br-lan: port 3(wlan0) entered forwarding state
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!