API tools faq
paste
Advertisement
Bullet64

4.18 missing pcie

Bullet64
Jul 3rd, 2018
222
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
Bash 31.78 KB | None | 0 0
raw download clone embed print report
  1. root@rockpro64:/mnt# dmesg
  2. [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  3. [    0.000000] Linux version 4.18.0-rc3-1031-ayufan-g2ceb62ce36ed (root@runner-f725ff63-project-6422644-concurrent-0) (gcc version 7.2.0 (Ubuntu/Linaro 7.2.0-6ubuntu1)) #1 SMP PREEMPT Tue Jul 3 08:50:35 UTC 2018
  4. [    0.000000] Machine model: Pine64 RockPro64
  5. [    0.000000] efi: Getting EFI parameters from FDT:
  6. [    0.000000] efi: UEFI not found.
  7. [    0.000000] cma: Reserved 16 MiB at 0x00000000f7000000
  8. [    0.000000] NUMA: No NUMA configuration found
  9. [    0.000000] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000f7ffffff]
  10. [    0.000000] NUMA: NODE_DATA [mem 0xf6fa95c0-0xf6faad7f]
  11. [    0.000000] Zone ranges:
  12. [    0.000000]   DMA32    [mem 0x0000000000200000-0x00000000f7ffffff]
  13. [    0.000000]   Normal   empty
  14. [    0.000000] Movable zone start for each node
  15. [    0.000000] Early memory node ranges
  16. [    0.000000]   node   0: [mem 0x0000000000200000-0x00000000f7ffffff]
  17. [    0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
  18. [    0.000000] On node 0 totalpages: 1015296
  19. [    0.000000]   DMA32 zone: 15864 pages used for memmap
  20. [    0.000000]   DMA32 zone: 0 pages reserved
  21. [    0.000000]   DMA32 zone: 1015296 pages, LIFO batch:31
  22. [    0.000000] psci: probing for conduit method from DT.
  23. [    0.000000] psci: PSCIv1.0 detected in firmware.
  24. [    0.000000] psci: Using standard PSCI v0.2 function IDs
  25. [    0.000000] psci: MIGRATE_INFO_TYPE not supported.
  26. [    0.000000] psci: SMC Calling Convention v1.0
  27. [    0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 with crng_init=0
  28. [    0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s56216 r8192 d29800 u94208
  29. [    0.000000] pcpu-alloc: s56216 r8192 d29800 u94208 alloc=23*4096
  30. [    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
  31. [    0.000000] Detected VIPT I-cache on CPU0
  32. [    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  33. [    0.000000] CPU features: enabling workaround for ARM erratum 845719
  34. [    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 999432
  35. [    0.000000] Policy zone: DMA32
  36. [    0.000000] Kernel command line: rw root=LABEL=linux-root rootwait rootfstype=ext4 panic=10 init=/sbin/init coherent_pool=1M ethaddr=aa:41:29:23:dc:d1 eth1addr= serial=b180dcc95b790fb cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1
  37. [    0.000000] Memory: 3944520K/4061184K available (17276K kernel code, 1800K rwdata, 7164K rodata, 1408K init, 477K bss, 100280K reserved, 16384K cma-reserved)
  38. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  39. [    0.000000] Preemptible hierarchical RCU implementation.
  40. [    0.000000]  RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
  41. [    0.000000]  Tasks RCU enabled.
  42. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  43. [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  44. [    0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  45. [    0.000000] GICv3: Distributor has no Range Selector support
  46. [    0.000000] GICv3: no VLPI support, no direct LPI support
  47. [    0.000000] ITS [mem 0xfee20000-0xfee3ffff]
  48. [    0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f2080000 (flat, esz 8, psz 64K, shr 0)
  49. [    0.000000] ITS: using cache flushing for cmd queue
  50. [    0.000000] GIC: using LPI property table @0x00000000f2040000
  51. [    0.000000] ITS: Allocated 1792 chunks for LPIs
  52. [    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
  53. [    0.000000] CPU0: using LPI pending table @0x00000000f2050000
  54. [    0.000000] GIC: using cache flushing for LPI property table
  55. [    0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
  56. [    0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  57. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  58. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  59. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  60. [    0.000000] rockchip_mmc_get_phase: invalid clk rate
  61. [    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  62. [    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  63. [    0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  64. [    0.001869] Console: colour dummy device 80x25
  65. [    0.002765] console [tty0] enabled
  66. [    0.002848] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  67. [    0.002887] pid_max: default: 32768 minimum: 301
  68. [    0.003013] Security Framework initialized
  69. [    0.005124] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  70. [    0.006166] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  71. [    0.006259] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  72. [    0.006315] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  73. [    0.031838] ASID allocator initialised with 32768 entries
  74. [    0.035837] Hierarchical SRCU implementation.
  75. [    0.039948] Platform MSI: interrupt-controller@fee20000 domain created
  76. [    0.040353] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  77. [    0.044789] EFI services will not be available.
  78. [    0.048697] smp: Bringing up secondary CPUs ...
  79. [    0.068862] Detected VIPT I-cache on CPU1
  80. [    0.068899] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
  81. [    0.068942] CPU1: using LPI pending table @0x00000000f1440000
  82. [    0.068989] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  83. [    0.088908] Detected VIPT I-cache on CPU2
  84. [    0.088937] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
  85. [    0.088976] CPU2: using LPI pending table @0x00000000f1460000
  86. [    0.089010] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  87. [    0.108973] Detected VIPT I-cache on CPU3
  88. [    0.109000] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
  89. [    0.109039] CPU3: using LPI pending table @0x00000000f1490000
  90. [    0.109071] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  91. [    0.131682] CPU features: enabling workaround for EL2 vector hardening
  92. [    0.132055] Detected PIPT I-cache on CPU4
  93. [    0.133299] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
  94. [    0.135810] CPU4: using LPI pending table @0x00000000f14d0000
  95. [    0.137082] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
  96. [    0.163216] Detected PIPT I-cache on CPU5
  97. [    0.164398] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
  98. [    0.166882] CPU5: using LPI pending table @0x00000000f1500000
  99. [    0.168004] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
  100. [    0.171802] smp: Brought up 1 node, 6 CPUs
  101. [    0.172192] SMP: Total of 6 processors activated.
  102. [    0.172224] CPU features: detected: GIC system register CPU interface
  103. [    0.172250] CPU features: detected: 32-bit EL0 Support
  104. [    0.261646] CPU: All CPU(s) started at EL2
  105. [    0.262121] alternatives: patching kernel code
  106. [    0.266889] devtmpfs: initialized
  107. [    0.284620] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  108. [    0.284899] futex hash table entries: 2048 (order: 5, 131072 bytes)
  109. [    0.287121] xor: measuring software checksum speed
  110. [    0.325064]    8regs     :  1152.000 MB/sec
  111. [    0.365255]    8regs_prefetch:  1026.000 MB/sec
  112. [    0.405486]    32regs    :  1415.000 MB/sec
  113. [    0.445713]    32regs_prefetch:  1190.000 MB/sec
  114. [    0.445734] xor: using function: 32regs (1415.000 MB/sec)
  115. [    0.445776] pinctrl core: initialized pinctrl subsystem
  116. [    0.449207] DMI not present or invalid.
  117. [    0.450727] NET: Registered protocol family 16
  118. [    0.454978] audit: initializing netlink subsys (disabled)
  119. [    0.457655] audit: type=2000 audit(0.448:1): state=initialized audit_enabled=0 res=1
  120. [    0.464574] cpuidle: using governor menu
  121. [    0.466408] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
  122. [    0.466611] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  123. [    0.480913] DMA: preallocated 1024 KiB pool for atomic allocations
  124. [    0.484434] Serial: AMBA PL011 UART driver
  125. [    0.603530] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  126. [    0.605352] cryptd: max_cpu_qlen set to 1000
  127. [    0.675365] raid6: int64x1  gen()   216 MB/s
  128. [    0.744097] raid6: int64x1  xor()   219 MB/s
  129. [    0.816782] raid6: int64x2  gen()     8 MB/s
  130. [    0.884555] raid6: int64x2  xor()   298 MB/s
  131. [    0.952931] raid6: int64x4  gen()   514 MB/s
  132. [    1.021228] raid6: int64x4  xor()   383 MB/s
  133. [    1.089703] raid6: int64x8  gen()   493 MB/s
  134. [    1.157986] raid6: int64x8  xor()   376 MB/s
  135. [    1.226356] raid6: neonx1   gen()   364 MB/s
  136. [    1.294757] raid6: neonx1   xor()   427 MB/s
  137. [    1.363134] raid6: neonx2   gen()   583 MB/s
  138. [    1.431549] raid6: neonx2   xor()   605 MB/s
  139. [    1.499913] raid6: neonx4   gen()   755 MB/s
  140. [    1.568286] raid6: neonx4   xor()   724 MB/s
  141. [    1.636698] raid6: neonx8   gen()   828 MB/s
  142. [    1.705039] raid6: neonx8   xor()   770 MB/s
  143. [    1.705058] raid6: using algorithm neonx8 gen() 828 MB/s
  144. [    1.705079] raid6: .... xor() 770 MB/s, rmw enabled
  145. [    1.705104] raid6: using neon recovery algorithm
  146. [    1.707007] ACPI: Interpreter disabled.
  147. [    1.710762] vcc3v3_pcie: supplied by dc_12v
  148. [    1.712796] vcc_sys: supplied by dc_12v
  149. [    1.717065] vgaarb: loaded
  150. [    1.718367] SCSI subsystem initialized
  151. [    1.720109] libata version 3.00 loaded.
  152. [    1.720872] usbcore: registered new interface driver usbfs
  153. [    1.721114] usbcore: registered new interface driver hub
  154. [    1.721395] usbcore: registered new device driver usb
  155. [    1.724096] media: Linux media interface: v0.10
  156. [    1.724325] videodev: Linux video capture interface: v2.00
  157. [    1.724757] pps_core: LinuxPPS API ver. 1 registered
  158. [    1.724800] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  159. [    1.724898] PTP clock support registered
  160. [    1.727612] Advanced Linux Sound Architecture Driver Initialized.
  161. [    1.728997] Bluetooth: Core ver 2.22
  162. [    1.729188] NET: Registered protocol family 31
  163. [    1.729209] Bluetooth: HCI device and connection manager initialized
  164. [    1.729240] Bluetooth: HCI socket layer initialized
  165. [    1.729263] Bluetooth: L2CAP socket layer initialized
  166. [    1.729335] Bluetooth: SCO socket layer initialized
  167. [    1.729382] NetLabel: Initializing
  168. [    1.729398] NetLabel:  domain hash size = 128
  169. [    1.729415] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
  170. [    1.729556] NetLabel:  unlabeled traffic allowed by default
  171. [    1.732766] clocksource: Switched to clocksource arch_sys_counter
  172. [    1.733314] VFS: Disk quotas dquot_6.6.0
  173. [    1.733420] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  174. [    1.733734] pnp: PnP ACPI: disabled
  175. [    1.750296] NET: Registered protocol family 2
  176. [    1.751964] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
  177. [    1.752179] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  178. [    1.753083] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  179. [    1.753866] TCP: Hash tables configured (established 32768 bind 32768)
  180. [    1.754592] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  181. [    1.754839] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  182. [    1.755329] NET: Registered protocol family 1
  183. [    1.759345] RPC: Registered named UNIX socket transport module.
  184. [    1.759393] RPC: Registered udp transport module.
  185. [    1.759412] RPC: Registered tcp transport module.
  186. [    1.759431] RPC: Registered tcp NFSv4.1 backchannel transport module.
  187. [    1.760767] PCI: CLS 0 bytes, default 64
  188. [    1.761996] Trying to unpack rootfs image as initramfs...
  189. [    2.220034] Freeing initrd memory: 5536K
  190. [    2.228631] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  191. [    2.231154] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  192. [    2.232143] kvm [1]: 8-bit VMID
  193. [    2.234719] kvm [1]: vgic-v2@fff20000
  194. [    2.236404] kvm [1]: GIC system register CPU interface enabled
  195. [    2.239026] kvm [1]: vgic interrupt IRQ10
  196. [    2.242850] kvm [1]: Hyp mode initialized successfully
  197. [    2.259175] workingset: timestamp_bits=44 max_order=20 bucket_order=0
  198. [    2.276201] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  199. [    2.278563] NFS: Registering the id_resolver key type
  200. [    2.278872] Key type id_resolver registered
  201. [    2.278891] Key type id_legacy registered
  202. [    2.278920] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  203. [    2.278944] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  204. [    2.281423] fuse init (API version 7.27)
  205. [    2.282580] 9p: Installing v9fs 9p2000 file system support
  206. [    2.282795] pstore: using deflate compression
  207. [    2.333498] NET: Registered protocol family 38
  208. [    2.334011] Key type asymmetric registered
  209. [    2.334043] Asymmetric key parser 'x509' registered
  210. [    2.334819] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
  211. [    2.335520] io scheduler noop registered
  212. [    2.336075] io scheduler cfq registered (default)
  213. [    2.336106] io scheduler mq-deadline registered
  214. [    2.336128] io scheduler kyber registered
  215. [    2.347629] vcc5v0_host: supplied by vcc_sys
  216. [    2.404856] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
  217. [    2.405211] dma-pl330 ff6d0000.dma-controller:   DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  218. [    2.410876] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
  219. [    2.411294] dma-pl330 ff6e0000.dma-controller:   DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  220. [    2.421317] pwm-regulator: supplied by vcc_sys
  221. [    2.422193] vcc3v3_sys: supplied by vcc_sys
  222. [    2.433633] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  223. [    2.438009] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A
  224. [    2.439763] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 38, base_baud = 1500000) is a 16550A
  225. [    2.547785] console [ttyS2] enabled
  226. [    2.551298] SuperH (H)SCI(F) driver initialized
  227. [    2.553410] msm_serial: driver initialized
  228. [    2.577351] cacheinfo: Unable to detect cache hierarchy for CPU 0
  229. [    2.601751] brd: module loaded
  230. [    2.618089] loop: module loaded
  231. [    2.666458] libphy: Fixed MDIO Bus: probed
  232. [    2.669265] tun: Universal TUN/TAP device driver, 1.6
  233. [    2.679117] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  234. [    2.679932] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  235. [    2.680982] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  236. [    2.681636] igb: Copyright (c) 2007-2014 Intel Corporation.
  237. [    2.682226] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  238. [    2.682938] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  239. [    2.684682] sky2: driver version 1.30
  240. [    2.689311] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
  241. [    2.690198] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  242. [    2.690846] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  243. [    2.691364] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
  244. [    2.691884] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  245. [    2.692564] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  246. [    2.698154] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  247. [    2.700324] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
  248. [    2.701036] rk_gmac-dwmac fe300000.ethernet:     DWMAC1000
  249. [    2.701515] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
  250. [    2.702193] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
  251. [    2.702870] rk_gmac-dwmac fe300000.ethernet: COE Type 2
  252. [    2.703344] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
  253. [    2.703980] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
  254. [    2.704707] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
  255. [    2.705247] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
  256. [    2.705779] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  257. [    2.822175] libphy: stmmac: probed
  258. [    2.822696] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
  259. [    2.823823] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
  260. [    2.828679] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  261. [    2.829687] usbcore: registered new interface driver pegasus
  262. [    2.830354] usbcore: registered new interface driver rtl8150
  263. [    2.830969] usbcore: registered new interface driver r8152
  264. [    2.831544] usbcore: registered new interface driver asix
  265. [    2.832093] usbcore: registered new interface driver ax88179_178a
  266. [    2.832759] usbcore: registered new interface driver cdc_ether
  267. [    2.833354] usbcore: registered new interface driver dm9601
  268. [    2.833928] usbcore: registered new interface driver CoreChips
  269. [    2.834522] usbcore: registered new interface driver smsc75xx
  270. [    2.835118] usbcore: registered new interface driver smsc95xx
  271. [    2.835700] usbcore: registered new interface driver net1080
  272. [    2.836270] usbcore: registered new interface driver plusb
  273. [    2.836868] usbcore: registered new interface driver cdc_subset
  274. [    2.837478] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  275. [    2.838243] usbcore: registered new interface driver cdc_ncm
  276. [    2.839330] VFIO - User Level meta-driver version: 0.3
  277. [    2.843531] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
  278. [    2.859134] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
  279. [    2.866057] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2
  280. [    2.877613] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  281. [    2.878470] ehci-pci: EHCI PCI platform driver
  282. [    2.878999] ehci-platform: EHCI generic platform driver
  283. [    2.882043] ehci-platform fe380000.usb: EHCI Host Controller
  284. [    2.882652] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
  285. [    2.886467] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000
  286. [    2.900414] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  287. [    2.902690] hub 1-0:1.0: USB hub found
  288. [    2.903105] hub 1-0:1.0: 1 port detected
  289. [    2.906762] ehci-platform fe3c0000.usb: EHCI Host Controller
  290. [    2.907328] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
  291. [    2.910785] ehci-platform fe3c0000.usb: irq 32, io mem 0xfe3c0000
  292. [    2.924426] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  293. [    2.926404] hub 2-0:1.0: USB hub found
  294. [    2.926791] hub 2-0:1.0: 1 port detected
  295. [    2.928115] ehci-orion: EHCI orion driver
  296. [    2.929118] ehci-exynos: EHCI EXYNOS driver
  297. [    2.929872] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  298. [    2.930597] ohci-pci: OHCI PCI platform driver
  299. [    2.931136] ohci-platform: OHCI generic platform driver
  300. [    2.932008] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  301. [    2.932726] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
  302. [    2.935226] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000
  303. [    2.997670] hub 3-0:1.0: USB hub found
  304. [    2.998062] hub 3-0:1.0: 1 port detected
  305. [    2.999303] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  306. [    2.999951] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
  307. [    3.001483] ohci-platform fe3e0000.usb: irq 33, io mem 0xfe3e0000
  308. [    3.065690] hub 4-0:1.0: USB hub found
  309. [    3.066096] hub 4-0:1.0: 1 port detected
  310. [    3.067337] ohci-exynos: OHCI EXYNOS driver
  311. [    3.069708] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  312. [    3.070293] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
  313. [    3.073537] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  314. [    3.074483] xhci-hcd xhci-hcd.0.auto: irq 218, io mem 0xfe800000
  315. [    3.077054] hub 5-0:1.0: USB hub found
  316. [    3.077446] hub 5-0:1.0: 1 port detected
  317. [    3.078412] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  318. [    3.078953] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
  319. [    3.079680] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0  SuperSpeed
  320. [    3.080591] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  321. [    3.082527] hub 6-0:1.0: USB hub found
  322. [    3.082913] hub 6-0:1.0: 1 port detected
  323. [    3.084078] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  324. [    3.084759] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
  325. [    3.088039] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  326. [    3.089119] xhci-hcd xhci-hcd.1.auto: irq 219, io mem 0xfe900000
  327. [    3.091501] hub 7-0:1.0: USB hub found
  328. [    3.091909] hub 7-0:1.0: 1 port detected
  329. [    3.092968] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  330. [    3.093543] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
  331. [    3.094257] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0  SuperSpeed
  332. [    3.094951] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
  333. [    3.097123] hub 8-0:1.0: USB hub found
  334. [    3.097520] hub 8-0:1.0: 1 port detected
  335. [    3.099458] usbcore: registered new interface driver usb-storage
  336. [    3.111415] i2c /dev entries driver
  337. [    3.195613] rk808 0-001b: chip id: 0x0
  338. [    3.280703] rk808-regulator rk808-regulator: there is no dvs0 gpio
  339. [    3.281753] rk808-regulator rk808-regulator: there is no dvs1 gpio
  340. [    3.282602] DCDC_REG1: supplied by vcc_sys
  341. [    3.284957] DCDC_REG2: supplied by vcc_sys
  342. [    3.286109] DCDC_REG3: supplied by vcc_sys
  343. [    3.286861] DCDC_REG4: supplied by vcc_sys
  344. [    3.287876] LDO_REG1: supplied by vcc_sys
  345. [    3.289753] LDO_REG2: supplied by vcc_sys
  346. [    3.291515] LDO_REG3: supplied by vcc_sys
  347. [    3.293149] LDO_REG4: supplied by vcc_sys
  348. [    3.294806] LDO_REG5: supplied by vcc_sys
  349. [    3.296246] LDO_REG6: supplied by vcc_sys
  350. [    3.297966] LDO_REG7: supplied by vcc_sys
  351. [    3.299362] LDO_REG8: supplied by vcc_sys
  352. [    3.300950] SWITCH_REG1: supplied by vcc3v3_sys
  353. [    3.301890] SWITCH_REG2: supplied by vcc3v3_sys
  354. [    3.310461] rk808-rtc rk808-rtc: registered as rtc0
  355. [    3.314382] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  356. [    3.315095] fan53555-reg: supplied by vcc_sys
  357. [    3.317082] vcc1v8_s3: supplied by vcc_1v8
  358. [    3.319311] fan53555-regulator 0-0041: FAN53555 Option[9] Rev[7] Detected!
  359. [    3.319974] fan53555-reg: supplied by vcc_sys
  360. [    3.321326] random: fast init done
  361. [    3.334891] rockchip-rga ff680000.rga: HW Version: 0x03.02
  362. [    3.341991] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
  363. [    3.361688] Bluetooth: HCI UART driver ver 2.3
  364. [    3.370470] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 KHz
  365. [    3.374588] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 408000 KHz
  366. [    3.376476] sdhci: Secure Digital Host Controller Interface driver
  367. [    3.377033] sdhci: Copyright(c) Pierre Ossman
  368. [    3.377693] Synopsys Designware Multimedia Card Interface Driver
  369. [    3.379384] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
  370. [    3.380215] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  371. [    3.380835] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  372. [    3.381389] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
  373. [    3.382339] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
  374. [    3.395652] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  375. [    3.411705] sdhci-pltfm: SDHCI platform and OF driver helper
  376. [    3.415240] mmc1: CQHCI version 5.10
  377. [    3.441202] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
  378. [    3.447199] ledtrig-cpu: registered to indicate activity on CPUs
  379. [    3.449457] usbcore: registered new interface driver usbhid
  380. [    3.450034] usbhid: USB HID core driver
  381. [    3.459545] xt_time: kernel timezone is -0000
  382. [    3.459970] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
  383. [    3.460790] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
  384. [    3.461684] IPVS: ipvs loaded.
  385. [    3.461977] IPVS: [rr] scheduler registered.
  386. [    3.462357] IPVS: [wrr] scheduler registered.
  387. [    3.462762] IPVS: [lc] scheduler registered.
  388. [    3.463156] IPVS: [wlc] scheduler registered.
  389. [    3.463542] IPVS: [fo] scheduler registered.
  390. [    3.463938] IPVS: [ovf] scheduler registered.
  391. [    3.464430] IPVS: [lblc] scheduler registered.
  392. [    3.464851] IPVS: [lblcr] scheduler registered.
  393. [    3.465259] IPVS: [dh] scheduler registered.
  394. [    3.465638] IPVS: [sh] scheduler registered.
  395. [    3.466016] IPVS: [sed] scheduler registered.
  396. [    3.466402] IPVS: [nq] scheduler registered.
  397. [    3.467078] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
  398. [    3.467717] Initializing XFRM netlink socket
  399. [    3.468608] NET: Registered protocol family 10
  400. [    3.469756] Segment Routing with IPv6
  401. [    3.470436] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  402. [    3.471339] NET: Registered protocol family 17
  403. [    3.471767] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  404. [    3.473085] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  405. [    3.473619] Bluetooth: HIDP socket layer initialized
  406. [    3.474090] 8021q: 802.1Q VLAN Support v1.8
  407. [    3.474491] 9pnet: Installing 9P2000 support
  408. [    3.474920] Key type dns_resolver registered
  409. [    3.475883] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0)
  410. [    3.476577] registered taskstats version 1
  411. [    3.476841] mmc0: new high speed SDHC card at address aaaa
  412. [    3.477908] Btrfs loaded, crc32c=crc32c-generic
  413. [    3.478340] mmcblk0: mmc0:aaaa SC32G 29.7 GiB
  414. [    3.485797]  mmcblk0: p1 p2 p3 p4 p5 p6 p7
  415. [    3.495242] rk808-rtc rk808-rtc: setting system clock to 2018-07-03 14:53:20 UTC (1530629600)
  416. [    3.496012] of_cfs_init
  417. [    3.496293] of_cfs_init: OK
  418. [    3.496781] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  419. [    3.497541] cfg80211: failed to load regulatory.db
  420. [    3.498464] vcc3v3_pcie: disabling
  421. [    3.498788] ALSA device list:
  422. [    3.499053]   No soundcards found.
  423. [    3.499663] ttyS2 - failed to request DMA
  424. [    3.500480] Freeing unused kernel memory: 1408K
  425. [    3.858726] iommu: Adding device ff8f0000.vop to group 0
  426. [    3.859356] rockchip-vop ff8f0000.vop: Linked as a consumer to ff8f3f00.iommu
  427. [    3.862352] iommu: Adding device ff900000.vop to group 1
  428. [    3.862999] rockchip-vop ff900000.vop: Linked as a consumer to ff903f00.iommu
  429. [    3.870001] rockchip-drm display-subsystem: Linked as a consumer to ff8f0000.vop
  430. [    3.870700] rockchip-drm display-subsystem: Linked as a consumer to ff900000.vop
  431. [    3.871969] rockchip-drm display-subsystem: Linked as a consumer to ff940000.hdmi
  432. [    3.875913] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
  433. [    3.880160] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
  434. [    3.882226] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
  435. [    3.888993] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
  436. [    3.889846] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  437. [    3.890433] [drm] No driver support for vblank timestamp query.
  438. [    3.960584] Console: switching to colour frame buffer device 240x67
  439. [    4.007411] rockchip-drm display-subsystem: fb0:  frame buffer device
  440. [    4.020830] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
  441. [    4.144446] EXT4-fs (mmcblk0p7): mounted filesystem with writeback data mode. Opts: (null)
  442. [    4.741553] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  443. [    4.745024] systemd[1]: Detected architecture arm64.
  444. [    4.767246] systemd[1]: Set hostname to <rockpro64>.
  445. [    5.094907] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  446. [    5.096882] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  447. [    5.297160] random: systemd: uninitialized urandom read (16 bytes read)
  448. [    5.298309] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  449. [    5.308568] random: systemd: uninitialized urandom read (16 bytes read)
  450. [    5.310178] systemd[1]: Created slice User and Session Slice.
  451. [    5.320701] random: systemd: uninitialized urandom read (16 bytes read)
  452. [    5.321627] systemd[1]: Reached target Remote File Systems.
  453. [    5.332674] systemd[1]: Started ntp-systemd-netif.path.
  454. [    5.344518] systemd[1]: Reached target System Time Synchronized.
  455. [    6.004364] systemd-journald[2233]: Received request to flush runtime journal from PID 1
  456. [    6.931402] rockchip-pinctrl pinctrl: pin gpio4-0 already requested by ff880000.i2s; cannot claim for 1-0010
  457. [    6.932869] rockchip-pinctrl pinctrl: pin-128 (1-0010) status -22
  458. [    6.933563] rockchip-pinctrl pinctrl: could not request pin 128 (gpio4-0) from group i2s-8ch-mclk  on device rockchip-pinctrl
  459. [    6.934769] es8316 1-0010: Error applying setting, reverse things back
  460. [    6.935501] es8316: probe of 1-0010 failed with error -22
  461. [    7.045106] random: crng init done
  462. [    7.045113] random: 7 urandom warning(s) missed due to ratelimiting
  463. [    7.061985] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
  464. [    7.073961] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
  465. [    7.073976] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
  466. [    7.074252] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  467. [    7.483286] FAT-fs (mmcblk0p6): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  468. [   11.157312] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  469. [   11.157361] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  470. [   25.400321] usb 8-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
  471. [   25.462038] scsi host0: uas
  472. [   25.481687] scsi 0:0:0:0: Direct-Access     SanDisk  SDSSDA240G       Z320 PQ: 0 ANSI: 6
  473. [   25.484012] usbcore: registered new interface driver uas
  474. [   56.320020] sd 0:0:0:0: tag#0 uas_eh_abort_handler 0 uas-tag 1 inflight: CMD IN
  475. [   56.320030] sd 0:0:0:0: tag#0 CDB: opcode=0x12 12 01 00 00 40 00
  476. [   56.340006] scsi host0: uas_eh_device_reset_handler start
  477. [   56.340044] xhci-hcd xhci-hcd.1.auto: ERROR Transfer event for unknown stream ring slot 1 ep 14
  478. [   56.340972] xhci-hcd xhci-hcd.1.auto: @00000000f71164b0 00000000 00000000 1b000000 010f8001
  479. [   56.536227] usb 8-1: reset SuperSpeed Gen 1 USB device number 2 using xhci-hcd
  480. [   56.561762] scsi host0: uas_eh_device_reset_handler success
  481. [   56.568307] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
  482. [   56.568485] sd 0:0:0:0: [sda] Write Protect is off
  483. [   56.568491] sd 0:0:0:0: [sda] Mode Sense: 2f 00 00 00
  484. [   56.568771] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  485. [   56.568899] xhci-hcd xhci-hcd.1.auto: ERROR Transfer event for unknown stream ring slot 1 ep 10
  486. [   56.569827] xhci-hcd xhci-hcd.1.auto: @00000000f71167b0 00000000 00000000 1b000000 010b8001
  487. [   56.575844]  sda: sda1
  488. [   56.578074] sd 0:0:0:0: [sda] Attached SCSI disk
  489. [   67.616171] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!