Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ps4@ps4 ~]$ dmesg
- [ 0.000000] ps4: x86_ps4_early_setup: PS4 early setup
- [ 0.000000] Linux version 4.14.14-ge4bd98a14f8b-dirty (rancido@dhcppc3) (gcc version 7.2.0 (Debian 7.2.0-18)) #3 SMP PREEMPT Thu Apr 5 15:04:40 CEST 2018
- [ 0.000000] Command line: panic=0 clocksource=tsc radeon.dpm=0 console=tty0 console=ttyS0,115200n8 console=uart8250,mmio32,0xd0340000 video=HDMI-A-1:1920x1080-24@60 consoleblank=0 net.ifnames=0 drm.debug=0
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
- [ 0.000000] x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
- [ 0.000000] x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
- [ 0.000000] x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
- [ 0.000000] e820: BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000007fff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000000008000-0x000000000007ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000080000-0x0000000000099fff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000000009a000-0x00000000000bffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000effff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000003fffff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000000400000-0x000000000047ffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000480000-0x000000000067ffff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000000680000-0x00000000006fffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000000700000-0x000000007efe7fff] usable
- [ 0.000000] BIOS-e820: [mem 0x000000007efe8000-0x000000007efeffff] ACPI NVS
- [ 0.000000] BIOS-e820: [mem 0x000000007eff0000-0x000000007effffff] ACPI data
- [ 0.000000] BIOS-e820: [mem 0x000000007f000000-0x000000007fffffff] usable
- [ 0.000000] BIOS-e820: [mem 0x0000000080000000-0x00000000fbffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] reserved
- [ 0.000000] BIOS-e820: [mem 0x0000000140000000-0x000000027effffff] usable
- [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000d0340000 (options '')
- [ 0.000000] bootconsole [uart8250] enabled
- [ 0.000000] NX (Execute Disable) protection: active
- [ 0.000000] random: fast init done
- [ 0.000000] SMBIOS 2.1 present.
- [ 0.000000] DMI: , BIOS unde Wed 03/29/2017 5:2
- [ 0.000000] tsc: Fast TSC calibration failed
- [ 0.000000] tsc: Unable to calibrate against PIT
- [ 0.000000] tsc: No reference (HPET/PMTIMER) available
- [ 0.000000] ps4: Unable to measure TSC frequency, assuming default.
- [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
- [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
- [ 0.000000] e820: last_pfn = 0x27f000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-FFFFF write-back
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0000000000 mask FF80000000 write-back
- [ 0.000000] 1 base 0100000000 mask FF00000000 write-back
- [ 0.000000] 2 base 0200000000 mask FF80000000 write-back
- [ 0.000000] 3 base 0100000000 mask FFC0000000 uncachable
- [ 0.000000] 4 disabled
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] TOM2: 000000027f000000 aka 10224M
- [ 0.000000] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
- [ 0.000000] e820: update [mem 0x80000000-0x13fffffff] usable ==> reserved
- [ 0.000000] e820: last_pfn = 0x80000 max_arch_pfn = 0x400000000
- [ 0.000000] Base memory trampoline at [ffff880000094000] 94000 size 24576
- [ 0.000000] Using GB pages for direct mapping
- [ 0.000000] BRK [0x078cd000, 0x078cdfff] PGTABLE
- [ 0.000000] BRK [0x078ce000, 0x078cefff] PGTABLE
- [ 0.000000] BRK [0x078cf000, 0x078cffff] PGTABLE
- [ 0.000000] BRK [0x078d0000, 0x078d0fff] PGTABLE
- [ 0.000000] BRK [0x078d1000, 0x078d1fff] PGTABLE
- [ 0.000000] BRK [0x078d2000, 0x078d2fff] PGTABLE
- [ 0.000000] RAMDISK: [mem 0x09c00000-0x09f0afff]
- [ 0.000000] ACPI: Early table checksum verification disabled
- [ 0.000000] ACPI: RSDP 0x00000000000E0000 000024 (v02 SIE )
- [ 0.000000] ACPI: XSDT 0x00000000000E0088 00004C (v01 SIE ORBIS 20121218 INTL 20110211)
- [ 0.000000] ACPI: FACP 0x00000000000E016C 0000F4 (v04 SIE ORBIS 20130205 INTL 20110211)
- [ 0.000000] ACPI: DSDT 0x00000000000E0430 00018C (v02 SIE ORBIS 20121002 INTL 20110211)
- [ 0.000000] ACPI: FACS 0x00000000000E012C 000040
- [ 0.000000] ACPI: FACS 0x00000000000E012C 000040
- [ 0.000000] ACPI: APIC 0x00000000000E0298 00006C (v02 SIE ORBIS 20120725 INTL 20110211)
- [ 0.000000] ACPI: MCFG 0x00000000000E0304 00003C (v01 SIE ORBIS 20120725 INTL 20110211)
- [ 0.000000] ACPI: SSDT 0x00000000000E0730 0001EC (v01 AMD POWERNOW 00000001 AMD 00000001)
- [ 0.000000] ACPI: IVRS 0x00000000000E091C 000054 (v01 F0F PS4KEXEC 20161225 KEXC 20161225)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027effffff]
- [ 0.000000] NODE_DATA(0) allocated [mem 0x27effa000-0x27effdfff]
- [ 0.000000] Zone ranges:
- [ 0.000000] DMA [mem 0x0000000000001000-0x0000000000ffffff]
- [ 0.000000] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
- [ 0.000000] Normal [mem 0x0000000100000000-0x000000027effffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000001000-0x0000000000007fff]
- [ 0.000000] node 0: [mem 0x0000000000080000-0x0000000000099fff]
- [ 0.000000] node 0: [mem 0x0000000000100000-0x00000000003fffff]
- [ 0.000000] node 0: [mem 0x0000000000480000-0x000000000067ffff]
- [ 0.000000] node 0: [mem 0x0000000000700000-0x000000007efe7fff]
- [ 0.000000] node 0: [mem 0x000000007f000000-0x000000007fffffff]
- [ 0.000000] node 0: [mem 0x0000000140000000-0x000000027effffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x000000027effffff]
- [ 0.000000] On node 0 totalpages: 1830409
- [ 0.000000] DMA zone: 57 pages used for memmap
- [ 0.000000] DMA zone: 13 pages reserved
- [ 0.000000] DMA zone: 3617 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 8128 pages used for memmap
- [ 0.000000] DMA32 zone: 520168 pages, LIFO batch:31
- [ 0.000000] Normal zone: 20416 pages used for memmap
- [ 0.000000] Normal zone: 1306624 pages, LIFO batch:31
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: No IOAPIC entries present
- [ 0.000000] Using ACPI for processor (LAPIC) configuration information
- [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
- [ 0.000000] e820: [mem 0xfc000000-0xffffffff] available for PCI devices
- [ 0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1910969940391419 ns
- [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8 nr_node_ids:1
- [ 0.000000] percpu: Embedded 37 pages/cpu @ffff88027ec00000 s113304 r8192 d30056 u262144
- [ 0.000000] pcpu-alloc: s113304 r8192 d30056 u262144 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 1801795
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: panic=0 clocksource=tsc radeon.dpm=0 console=tty0 console=ttyS0,115200n8 console=uart8250,mmio32,0xd0340000 video=HDMI-A-1:1920x1080-24@60 consoleblank=0 net.ifnames=0 drm.debug=0
- [ 0.000000] log_buf_len individual max cpu contribution: 65536 bytes
- [ 0.000000] log_buf_len total cpu_extra contributions: 458752 bytes
- [ 0.000000] log_buf_len min size: 262144 bytes
- [ 0.000000] log_buf_len: 1048576 bytes
- [ 0.000000] early log buf free: 253952(96%)
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Memory: 7110084K/7321636K available (12300K kernel code, 638K rwdata, 5556K rodata, 896K init, 580K bss, 211552K reserved, 0K cma-reserved)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] Tasks RCU enabled.
- [ 0.000000] NR_IRQS: 4352, nr_irqs: 128, preallocated irqs: 0
- [ 0.000000] do_IRQ: 0.49 No irq handler for vector
- [ 0.000000] Console: colour dummy device 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] console [ttyS0] enabled
- [ 0.000000] tsc: Fast TSC calibration failed
- [ 0.000000] tsc: Unable to calibrate against PIT
- [ 0.000000] tsc: No reference (HPET/PMTIMER) available
- [ 0.000000] ps4: EMC timer started in 24342 TSC ticks
- [ 0.000000] ps4: Calibrated TSC frequency: 1594021280 kHz
- [ 0.000000] tsc: Detected 1594.021 MHz processor
- [ 0.000023] Calibrating delay loop (skipped), value calculated using timer frequency.. 3188.04 BogoMIPS (lpj=1594021)
- [ 0.001000] pid_max: default: 32768 minimum: 301
- [ 0.001000] ACPI: Core revision 20170728
- [ 0.001000] ACPI: 2 ACPI AML tables successfully acquired and loaded
- [ 0.001000] ACPI: setting ELCR to 0200 (from ffff)
- [ 0.001000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
- [ 0.001000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.001000] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.001000] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
- [ 0.001000] CPU: Physical Processor ID: 0
- [ 0.001000] CPU: Processor Core ID: 0
- [ 0.001000] mce: CPU supports 6 MCE banks
- [ 0.001000] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
- [ 0.001000] Last level dTLB entries: 4KB 512, 2MB 256, 4MB 128, 1GB 0
- [ 0.001000] Spectre V2 mitigation: Vulnerable: Minimal AMD ASM retpoline
- [ 0.001000] Freeing SMP alternatives memory: 36K
- [ 0.001000] smpboot: Max logical packages: 1
- [ 0.001000] smpboot: CPU0: AMD DG1306SML87HY (family: 0x16, model: 0x41, stepping: 0x1)
- [ 0.005017] Performance Events: AMD PMU driver.
- [ 0.006007] ... version: 0
- [ 0.007003] ... bit width: 48
- [ 0.008008] ... generic registers: 4
- [ 0.009007] ... value mask: 0000ffffffffffff
- [ 0.010003] ... max period: 00007fffffffffff
- [ 0.011003] ... fixed-purpose events: 0
- [ 0.012003] ... event mask: 000000000000000f
- [ 0.015007] Hierarchical SRCU implementation.
- [ 0.020006] smp: Bringing up secondary CPUs ...
- [ 0.028019] x86: Booting SMP configuration:
- [ 0.029005] .... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7
- [ 0.079091] smp: Brought up 1 node, 8 CPUs
- [ 0.081006] smpboot: Total of 8 processors activated (25504.33 BogoMIPS)
- [ 0.085006] devtmpfs: initialized
- [ 0.087022] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
- [ 0.088023] futex hash table entries: 2048 (order: 5, 131072 bytes)
- [ 0.089172] prandom: seed boundary self test passed
- [ 0.091416] prandom: 100 self tests passed
- [ 0.092093] NET: Registered protocol family 16
- [ 0.093223] i2c-core: driver [dummy] registered
- [ 0.093250] cpuidle: using governor ladder
- [ 0.097034] cpuidle: using governor menu
- [ 0.102063] ACPI: bus type PCI registered
- [ 0.106081] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
- [ 0.115010] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
- [ 0.122019] PCI: Using configuration type 1 for base access
- [ 0.132350] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
- [ 0.140101] ACPI: Added _OSI(Module Device)
- [ 0.144017] ACPI: Added _OSI(Processor Device)
- [ 0.149007] ACPI: Added _OSI(3.0 _SCP Extensions)
- [ 0.153005] ACPI: Added _OSI(Processor Aggregator Device)
- [ 0.159094] ACPI: SCI (IRQ9) allocation failed
- [ 0.163007] ACPI Exception: AE_NOT_ACQUIRED, Unable to install System Control Interrupt handler (20170728/evevent-131)
- [ 0.174004] ACPI: Unable to start the ACPI Interpreter
- [ 0.180005] ACPI Error: Could not remove SCI handler (20170728/evmisc-281)
- [ 0.187123] vgaarb: loaded
- [ 0.190157] SCSI subsystem initialized
- [ 0.194014] libata version 3.00 loaded.
- [ 0.194071] usbcore: registered new interface driver usbfs
- [ 0.199019] usbcore: registered new interface driver hub
- [ 0.205070] usbcore: registered new device driver usb
- [ 0.210098] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.216025] PCI: Probing PCI hardware
- [ 0.220005] PCI: root bus 00: using default resources
- [ 0.220008] PCI: Probing PCI hardware (bus 00)
- [ 0.220044] PCI host bridge to bus 0000:00
- [ 0.224008] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
- [ 0.231005] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffffff]
- [ 0.238005] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
- [ 0.246019] pci 0000:00:00.0: [1022:1436] type 00 class 0x060000
- [ 0.246113] pci 0000:00:00.2: [1022:1437] type 00 class 0x080600
- [ 0.246201] pci 0000:00:01.0: [1002:9924] type 00 class 0x030000
- [ 0.246217] pci 0000:00:01.0: reg 0x10: [mem 0xe0000000-0xe3ffffff 64bit pref]
- [ 0.246225] pci 0000:00:01.0: reg 0x18: [mem 0xe4000000-0xe47fffff 64bit pref]
- [ 0.246231] pci 0000:00:01.0: reg 0x20: [io 0x6000-0x60ff]
- [ 0.246236] pci 0000:00:01.0: reg 0x24: [mem 0xe4800000-0xe483ffff]
- [ 0.246242] pci 0000:00:01.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
- [ 0.246247] pci 0000:00:01.0: enabling Extended Tags
- [ 0.251027] pci 0000:00:01.0: supports D1 D2
- [ 0.251029] pci 0000:00:01.0: PME# supported from D1 D2 D3hot
- [ 0.251069] pci 0000:00:01.0: vgaarb: setting as boot VGA device
- [ 0.252000] pci 0000:00:01.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
- [ 0.266020] pci 0000:00:01.1: [1002:9921] type 00 class 0x040300
- [ 0.266034] pci 0000:00:01.1: reg 0x10: [mem 0xe4840000-0xe4843fff 64bit]
- [ 0.266055] pci 0000:00:01.1: enabling Extended Tags
- [ 0.271024] pci 0000:00:01.1: supports D1 D2
- [ 0.271074] pci 0000:00:02.0: [1022:1438] type 00 class 0x060000
- [ 0.271158] pci 0000:00:14.0: [104d:90c8] type 00 class 0x088000
- [ 0.271178] pci 0000:00:14.0: reg 0x10: [mem 0xfdf8000000-0xfdf9ffffff 64bit]
- [ 0.271186] pci 0000:00:14.0: reg 0x18: [io 0x1000-0x10ff]
- [ 0.271210] pci 0000:00:14.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
- [ 0.271249] pci 0000:00:14.0: supports D1
- [ 0.271251] pci 0000:00:14.0: PME# supported from D0 D1 D3hot
- [ 0.271314] pci 0000:00:14.1: [104d:90c9] type 00 class 0x088001
- [ 0.271334] pci 0000:00:14.1: reg 0x10: [mem 0xc4000000-0xc4003fff 64bit]
- [ 0.271363] pci 0000:00:14.1: reg 0x30: [mem 0x00000000-0x0000ffff pref]
- [ 0.271398] pci 0000:00:14.1: supports D1
- [ 0.271400] pci 0000:00:14.1: PME# supported from D0 D1 D3hot
- [ 0.271460] pci 0000:00:14.2: [104d:90ca] type 00 class 0x088002
- [ 0.271479] pci 0000:00:14.2: reg 0x10: [mem 0xc8000000-0xc8000fff 64bit]
- [ 0.272017] pci 0000:00:14.2: reg 0x24: [mem 0xc8001000-0xc8001fff]
- [ 0.272024] pci 0000:00:14.2: reg 0x30: [mem 0x00000000-0x0000ffff pref]
- [ 0.272059] pci 0000:00:14.2: supports D1
- [ 0.272061] pci 0000:00:14.2: PME# supported from D0 D1 D3hot
- [ 0.272121] pci 0000:00:14.3: [104d:90cb] type 00 class 0x088003
- [ 0.272140] pci 0000:00:14.3: reg 0x10: [mem 0xcc000000-0xcc000fff 64bit]
- [ 0.272169] pci 0000:00:14.3: reg 0x30: [mem 0x00000000-0x00000fff pref]
- [ 0.272203] pci 0000:00:14.3: supports D1
- [ 0.272205] pci 0000:00:14.3: PME# supported from D0 D1 D3hot
- [ 0.272262] pci 0000:00:14.4: [104d:90cc] type 00 class 0x088004
- [ 0.272281] pci 0000:00:14.4: reg 0x10: [mem 0xd0000000-0xd00fffff 64bit]
- [ 0.272292] pci 0000:00:14.4: reg 0x18: [mem 0xd0100000-0xd0107fff 64bit]
- [ 0.272303] pci 0000:00:14.4: reg 0x20: [mem 0xd0200000-0xd03fffff 64bit]
- [ 0.272311] pci 0000:00:14.4: reg 0x30: [mem 0x00000000-0x0000ffff pref]
- [ 0.272345] pci 0000:00:14.4: supports D1
- [ 0.272347] pci 0000:00:14.4: PME# supported from D0 D1 D3hot
- [ 0.272403] pci 0000:00:14.5: [104d:90cd] type 00 class 0x088005
- [ 0.272422] pci 0000:00:14.5: reg 0x10: [mem 0xd4000000-0xd4000fff 64bit]
- [ 0.272433] pci 0000:00:14.5: reg 0x18: [mem 0xd4001000-0xd4001fff 64bit]
- [ 0.272452] pci 0000:00:14.5: reg 0x30: [mem 0x00000000-0x0000ffff pref]
- [ 0.272486] pci 0000:00:14.5: supports D1
- [ 0.272488] pci 0000:00:14.5: PME# supported from D0 D1 D3hot
- [ 0.272544] pci 0000:00:14.6: [104d:90ce] type 00 class 0x088006
- [ 0.272563] pci 0000:00:14.6: reg 0x10: [mem 0xd8000000-0xd8000fff 64bit]
- [ 0.272574] pci 0000:00:14.6: reg 0x18: [mem 0x80000000-0xbfffffff 64bit]
- [ 0.272582] pci 0000:00:14.6: reg 0x20: [mem 0xd9100000-0xd91fffff]
- [ 0.272589] pci 0000:00:14.6: reg 0x24: [mem 0xd9000000-0xd903ffff]
- [ 0.272597] pci 0000:00:14.6: reg 0x30: [mem 0x00000000-0x0000ffff pref]
- [ 0.272631] pci 0000:00:14.6: supports D1
- [ 0.272633] pci 0000:00:14.6: PME# supported from D0 D1 D3hot
- [ 0.272690] pci 0000:00:14.7: [104d:90cf] type 00 class 0x088007
- [ 0.272709] pci 0000:00:14.7: reg 0x10: [mem 0xdc000000-0xdc1fffff 64bit]
- [ 0.272720] pci 0000:00:14.7: reg 0x18: [mem 0xdc200000-0xdc3fffff 64bit]
- [ 0.272731] pci 0000:00:14.7: reg 0x20: [mem 0xdc400000-0xdc5fffff 64bit]
- [ 0.272738] pci 0000:00:14.7: reg 0x30: [mem 0x00000000-0x0000ffff pref]
- [ 0.272772] pci 0000:00:14.7: supports D1
- [ 0.272774] pci 0000:00:14.7: PME# supported from D0 D1 D3hot
- [ 0.272835] pci 0000:00:18.0: [1022:142e] type 00 class 0x060000
- [ 0.272894] pci 0000:00:18.1: [1022:142f] type 00 class 0x060000
- [ 0.272951] pci 0000:00:18.2: [1022:1430] type 00 class 0x060000
- [ 0.273015] pci 0000:00:18.3: [1022:1431] type 00 class 0x060000
- [ 0.273077] pci 0000:00:18.4: [1022:1432] type 00 class 0x060000
- [ 0.273133] pci 0000:00:18.5: [1022:1433] type 00 class 0x060000
- [ 0.273188] pci 0000:00:18.6: [1022:1434] type 00 class 0x060000
- [ 0.273251] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 00
- [ 0.274829] PCI: pci_cache_line_size set to 64 bytes
- [ 0.274868] e820: reserve RAM buffer [mem 0x00008000-0x0000ffff]
- [ 0.274870] e820: reserve RAM buffer [mem 0x0009a000-0x0009ffff]
- [ 0.274872] e820: reserve RAM buffer [mem 0x00680000-0x006fffff]
- [ 0.274874] e820: reserve RAM buffer [mem 0x7efe8000-0x7fffffff]
- [ 0.274876] e820: reserve RAM buffer [mem 0x27f000000-0x27fffffff]
- [ 0.275038] Bluetooth: Core ver 2.22
- [ 0.278013] NET: Registered protocol family 31
- [ 0.283003] Bluetooth: HCI device and connection manager initialized
- [ 0.289006] Bluetooth: HCI socket layer initialized
- [ 0.294006] Bluetooth: L2CAP socket layer initialized
- [ 0.300011] Bluetooth: SCO socket layer initialized
- [ 0.305199] clocksource: Switched to clocksource refined-jiffies
- [ 0.311196] pnp: PnP ACPI: disabled
- [ 0.318097] pci 0000:00:01.0: BAR 6: assigned [mem 0xfc080000-0xfc09ffff pref]
- [ 0.325006] pci 0000:00:14.0: BAR 6: assigned [mem 0xfc0a0000-0xfc0affff pref]
- [ 0.332002] pci 0000:00:14.1: BAR 6: assigned [mem 0xfc0b0000-0xfc0bffff pref]
- [ 0.340001] pci 0000:00:14.2: BAR 6: assigned [mem 0xfc0c0000-0xfc0cffff pref]
- [ 0.346999] pci 0000:00:14.4: BAR 6: assigned [mem 0xfc0d0000-0xfc0dffff pref]
- [ 0.354998] pci 0000:00:14.5: BAR 6: assigned [mem 0xfc0e0000-0xfc0effff pref]
- [ 0.361997] pci 0000:00:14.6: BAR 6: assigned [mem 0xfc0f0000-0xfc0fffff pref]
- [ 0.368996] pci 0000:00:14.7: BAR 6: assigned [mem 0xfc100000-0xfc10ffff pref]
- [ 0.376996] pci 0000:00:14.3: BAR 6: assigned [mem 0xfc110000-0xfc110fff pref]
- [ 0.383998] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
- [ 0.384001] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffffff]
- [ 0.384047] NET: Registered protocol family 2
- [ 0.389152] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.396266] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.403385] TCP: Hash tables configured (established 65536 bind 65536)
- [ 0.410135] UDP hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.417030] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
- [ 0.423161] NET: Registered protocol family 1
- [ 0.428078] RPC: Registered named UNIX socket transport module.
- [ 0.433995] RPC: Registered udp transport module.
- [ 0.438984] RPC: Registered tcp transport module.
- [ 0.443982] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.451013] pci 0000:00:01.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
- [ 0.458988] PCI: CLS mismatch (64 != 512), using 64 bytes
- [ 0.459145] Trying to unpack rootfs image as initramfs...
- [ 0.535477] Freeing initrd memory: 3116K
- [ 0.539139] pci 0000:00:00.2: can't find IRQ for PCI INT A; please try using pci=biosirq
- [ 0.548386] iommu: Adding device 0000:00:14.0 to group 0
- [ 0.553996] iommu: Adding device 0000:00:14.1 to group 0
- [ 0.559001] iommu: Adding device 0000:00:14.2 to group 0
- [ 0.563994] iommu: Adding device 0000:00:14.3 to group 0
- [ 0.569996] iommu: Adding device 0000:00:14.4 to group 0
- [ 0.574989] iommu: Adding device 0000:00:14.5 to group 0
- [ 0.580985] iommu: Adding device 0000:00:14.6 to group 0
- [ 0.585985] iommu: Adding device 0000:00:14.7 to group 0
- [ 0.591961] AMD-Vi: Found IOMMU at 0000:00:00.2 cap 0x40
- [ 0.596959] AMD-Vi: Extended features (0x840):
- [ 0.601958] IA
- [ 0.602958] AMD-Vi: Interrupt remapping enabled
- [ 0.608034] AMD-Vi: Lazy IO/TLB flushing enabled
- [ 0.615865] amd_uncore: AMD NB counters detected
- [ 0.620029] amd_uncore: AMD LLC counters detected
- [ 0.625962] LVT offset 0 assigned for vector 0x400
- [ 0.630972] perf: AMD IBS detected (0x000000ff)
- [ 0.635039] platform rtc_cmos: registered platform RTC device (no PNP device found)
- [ 0.647283] audit: initializing netlink subsys (disabled)
- [ 0.647979] audit: type=2000 audit(0.647:1): state=initialized audit_enabled=0 res=1
- [ 0.648138] workingset: timestamp_bits=40 max_order=21 bucket_order=0
- [ 0.650076] SLUB: Unable to add boot slab alias Acpi-Parse to sysfs
- [ 0.650983] ntfs: driver 2.1.32 [Flags: R/W].
- [ 0.651098] fuse init (API version 7.26)
- [ 0.653206] NET: Registered protocol family 38
- [ 0.653206] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
- [ 0.653206] io scheduler noop registered
- [ 0.653206] io scheduler deadline registered
- [ 0.653206] io scheduler cfq registered (default)
- [ 0.653206] io scheduler mq-deadline registered
- [ 0.653206] io scheduler kyber registered
- [ 0.672976] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.673072] Non-volatile memory driver v1.3
- [ 0.673072] Linux agpgart interface v0.103
- [ 0.673072] [drm] radeon kernel modesetting enabled.
- [ 0.678078] brd: module loaded
- [ 0.681102] loop: module loaded
- [ 0.681124] i2c-core: driver [at24] registered
- [ 0.681134] i2c-core: driver [eeprom] registered
- [ 0.681321] aeolia_pcie 0000:00:14.4: apcie_probe()
- [ 0.681372] aeolia_pcie 0000:00:14.4: apcie glue probe
- [ 0.681383] aeolia_pcie 0000:00:14.4: Aeolia chip revision: 0c3f3110:8d9d89c7:02000100
- [ 0.681393] aeolia_pcie 0000:00:14.4: apcie_create_irq_domain
- [ 0.681404] aeolia_pcie 0000:00:14.4: apcie_assign_irqs(23)
- [ 0.681627] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 1, 0x400, ffff88027608fcf8)
- [ 0.681630] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 2, 0x401, ffff88027608fcf8)
- [ 0.681632] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 3, 0x402, ffff88027608fcf8)
- [ 0.681634] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 4, 0x403, ffff88027608fcf8)
- [ 0.681636] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 5, 0x404, ffff88027608fcf8)
- [ 0.681638] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 6, 0x405, ffff88027608fcf8)
- [ 0.681639] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 7, 0x406, ffff88027608fcf8)
- [ 0.681641] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 8, 0x407, ffff88027608fcf8)
- [ 0.681643] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 9, 0x408, ffff88027608fcf8)
- [ 0.681645] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 10, 0x409, ffff88027608fcf8)
- [ 0.681646] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 11, 0x40a, ffff88027608fcf8)
- [ 0.681648] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 12, 0x40b, ffff88027608fcf8)
- [ 0.681650] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 13, 0x40c, ffff88027608fcf8)
- [ 0.681651] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 14, 0x40d, ffff88027608fcf8)
- [ 0.681653] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 15, 0x40e, ffff88027608fcf8)
- [ 0.681655] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 16, 0x40f, ffff88027608fcf8)
- [ 0.681657] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 17, 0x410, ffff88027608fcf8)
- [ 0.681658] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 18, 0x411, ffff88027608fcf8)
- [ 0.681660] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 19, 0x412, ffff88027608fcf8)
- [ 0.681662] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 20, 0x413, ffff88027608fcf8)
- [ 0.681664] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 21, 0x414, ffff88027608fcf8)
- [ 0.681665] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 22, 0x415, ffff88027608fcf8)
- [ 0.681667] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 23, 0x416, ffff88027608fcf8)
- [ 0.681684] aeolia_pcie 0000:00:14.4: apcie_assign_irqs returning 23
- [ 0.681686] aeolia_pcie 0000:00:14.4: dev->irq=1
- [ 0.682046] console [ttyS0] disabled
- [ 0.753996] 0000:00:14.4: ttyS0 at MMIO 0xd0340000 (irq = 20, base_baud = 3656250) is a XScale
- [ 0.998904] console [ttyS0] enabled
- [ 0.999970] 0000:00:14.4: ttyS1 at MMIO 0xd0341000 (irq = 21, base_baud = 3656250) is a XScale
- [ 1.000924] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000003) mask=0x8 irq=4 hwirq=0x403 ffff880275b44800
- [ 1.000924] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 4, subfunc: 3, addr fee00000 data: 0x00000003 (3)
- [ 1.000979] i2c i2c-0: adapter [icc] registered
- [ 1.001040] input: Power Button as /devices/pci0000:00/0000:00:14.4/input/input0
- [ 1.039924] ret=46, reply 00 00 02 00 00 00 16 00
- [ 1.054910] ret=20, reply 00 00 01 01 10 00 00 00
- [ 1.069912] ret=20, reply 00 00 00 00 00 00 00 00
- [ 1.080074] sky2: driver version 1.30
- [ 1.086973] sky2 0000:00:14.1: Yukon-2 OptimaEEE chip revision 1
- [ 1.099932] sky2 0000:00:14.1: apcie_assign_irqs(1)
- [ 1.099951] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 24, 0x100, ffff88027608fcc0)
- [ 1.099955] sky2 0000:00:14.1: apcie_assign_irqs returning 1
- [ 1.099963] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000017) mask=0x1 irq=24 hwirq=0x100 ffff880275b44800
- [ 1.099966] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 1, subfunc: 0, addr fee00000 data: 0x00000017 (23)
- [ 1.100054] sky2 0000:00:14.1 eth0: addr f8:46:1c:66:d7:61
- [ 1.111011] xhci_aeolia 0000:00:14.7: apcie_assign_irqs(3)
- [ 1.111046] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 25, 0x700, ffff88027608fce0)
- [ 1.111048] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 26, 0x701, ffff88027608fce0)
- [ 1.111050] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 27, 0x702, ffff88027608fce0)
- [ 1.111055] xhci_aeolia 0000:00:14.7: apcie_assign_irqs returning 3
- [ 1.111057] xhci_aeolia_probe_one 0
- [ 1.117908] xhci_aeolia 0000:00:14.7: xHCI Host Controller
- [ 1.128888] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 1
- [ 1.144910] xhci_aeolia 0000:00:14.7: hcc params 0x0228f66c hci version 0x100 quirks 0x20010010
- [ 1.161880] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000018) mask=0x1 irq=25 hwirq=0x700 ffff880275b44800
- [ 1.161883] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 7, subfunc: 0, addr fee00000 data: 0x00000018 (24)
- [ 1.161904] xhci_aeolia 0000:00:14.7: irq 25, io mem 0xdc000000
- [ 1.173952] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.187871] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.201868] usb usb1: Product: xHCI Host Controller
- [ 1.211866] usb usb1: Manufacturer: Linux 4.14.14-ge4bd98a14f8b-dirty xhci-hcd
- [ 1.226864] usb usb1: SerialNumber: 0000:00:14.7
- [ 1.235934] hub 1-0:1.0: USB hub found
- [ 1.243877] hub 1-0:1.0: 2 ports detected
- [ 1.252000] xhci_aeolia 0000:00:14.7: xHCI Host Controller
- [ 1.262863] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 2
- [ 1.278889] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 1.294892] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
- [ 1.308852] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.322849] usb usb2: Product: xHCI Host Controller
- [ 1.332848] usb usb2: Manufacturer: Linux 4.14.14-ge4bd98a14f8b-dirty xhci-hcd
- [ 1.346846] usb usb2: SerialNumber: 0000:00:14.7
- [ 1.356893] hub 2-0:1.0: USB hub found
- [ 1.363888] hub 2-0:1.0: 2 ports detected
- [ 1.372972] xhci_aeolia_probe_one 2
- [ 1.379852] xhci_aeolia 0000:00:14.7: xHCI Host Controller
- [ 1.390843] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 3
- [ 1.405948] xhci_aeolia 0000:00:14.7: hcc params 0x0220f06c hci version 0x100 quirks 0x20010010
- [ 1.423840] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 0000001a) mask=0x4 irq=27 hwirq=0x702 ffff880275b44800
- [ 1.423843] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 7, subfunc: 2, addr fee00000 data: 0x0000001a (26)
- [ 1.423862] xhci_aeolia 0000:00:14.7: irq 27, io mem 0xdc400000
- [ 1.435886] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
- [ 1.448831] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.463828] usb usb3: Product: xHCI Host Controller
- [ 1.473855] usb usb3: Manufacturer: Linux 4.14.14-ge4bd98a14f8b-dirty xhci-hcd
- [ 1.487890] usb usb3: SerialNumber: 0000:00:14.7
- [ 1.497943] hub 3-0:1.0: USB hub found
- [ 1.504832] hub 3-0:1.0: 1 port detected
- [ 1.512912] xhci_aeolia 0000:00:14.7: xHCI Host Controller
- [ 1.523825] xhci_aeolia 0000:00:14.7: new USB bus registered, assigned bus number 4
- [ 1.539845] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
- [ 1.555875] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
- [ 1.569813] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.584810] usb usb4: Product: xHCI Host Controller
- [ 1.593808] usb usb4: Manufacturer: Linux 4.14.14-ge4bd98a14f8b-dirty xhci-hcd
- [ 1.608819] usb 1-2: new high-speed USB device number 2 using xhci_aeolia
- [ 1.622846] usb usb4: SerialNumber: 0000:00:14.7
- [ 1.631889] hub 4-0:1.0: USB hub found
- [ 1.639814] hub 4-0:1.0: 1 port detected
- [ 1.647925] usbcore: registered new interface driver uas
- [ 1.657839] usbcore: registered new interface driver usb-storage
- [ 1.670829] i8042: PNP: No PS/2 controller found.
- [ 1.679827] mousedev: PS/2 mouse device common for all mice
- [ 1.690846] usbcore: registered new interface driver xpad
- [ 1.695806] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x16fa14c1253, max_idle_ns: 440795202974 ns
- [ 1.702422] clocksource: Switched to clocksource tsc
- [ 1.732031] i2c /dev entries driver
- [ 1.739143] i2c-dev: adapter [icc] registered as minor 0
- [ 1.739166] i2c-core: driver [i2c-slave-eeprom] registered
- [ 1.739247] Bluetooth: Generic Bluetooth SDIO driver ver 0.1
- [ 1.750665] sdhci: Secure Digital Host Controller Interface driver
- [ 1.754404] usb 1-2: New USB device found, idVendor=054c, idProduct=0ba5
- [ 1.754407] usb 1-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.758223] hub 1-2:1.0: USB hub found
- [ 1.758265] hub 1-2:1.0: 2 ports detected
- [ 1.806605] sdhci: Copyright(c) Pierre Ossman
- [ 1.815395] sdhci-pci 0000:00:14.3: SDHCI controller found [104d:90cb] (rev 0)
- [ 1.829994] sdhci-pci 0000:00:14.3: apcie_assign_irqs(1)
- [ 1.830046] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 28, 0x300, ffff88027608fcc8)
- [ 1.830053] sdhci-pci 0000:00:14.3: apcie_assign_irqs returning 1
- [ 1.830152] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 0000001b) mask=0x1 irq=28 hwirq=0x300 ffff880275b44800
- [ 1.830155] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 3, subfunc: 0, addr fee00000 data: 0x0000001b (27)
- [ 1.830266] mmc0: SDHCI controller on PCI [0000:00:14.3] using ADMA
- [ 1.839142] usb usb3-port1: over-current condition
- [ 1.852593] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 1.864047] hidraw: raw HID events driver (C) Jiri Kosina
- [ 1.868153] usb 2-2: new SuperSpeed USB device number 2 using xhci_aeolia
- [ 1.880418] usb 2-2: New USB device found, idVendor=054c, idProduct=0ba6
- [ 1.880421] usb 2-2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
- [ 1.886235] hub 2-2:1.0: USB hub found
- [ 1.886278] hub 2-2:1.0: 2 ports detected
- [ 1.932223] usbcore: registered new interface driver usbhid
- [ 1.943445] usbhid: USB HID core driver
- [ 1.951456] snd_hda_intel 0000:00:01.1: can't find IRQ for PCI INT B; please try using pci=biosirq
- [ 1.959112] usb usb4-port1: over-current condition
- [ 1.979252] usbcore: registered new interface driver snd-usb-audio
- [ 1.991824] usbcore: registered new interface driver snd-ua101
- [ 2.003593] usbcore: registered new interface driver snd-usb-usx2y
- [ 2.019678] usbcore: registered new interface driver snd-usb-us122l
- [ 2.019897] input: HD-Audio Generic HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.1/sound/card0/input1
- [ 2.019996] input: HD-Audio Generic HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.1/sound/card0/input2
- [ 2.058469] mmc0: new ultra high speed SDR104 SDIO card at address 0001
- [ 2.059246] Bluetooth: vendor=0x2df, device=0x912e, class=255, fn=2
- [ 2.059536] sdio platform data not available
- [ 2.083913] mwifiex_sdio mmc0:0001:1: WLAN FW already running! Skip FW dnld
- [ 2.083916] mwifiex_sdio mmc0:0001:1: WLAN FW is active
- [ 2.129684] usbcore: registered new interface driver snd-usb-caiaq
- [ 2.142189] usbcore: registered new interface driver snd-usb-6fire
- [ 2.154689] usbcore: registered new interface driver snd-usb-hiface
- [ 2.167331] usbcore: registered new interface driver snd-bcd2000
- [ 2.179496] usbcore: registered new interface driver snd_usb_pod
- [ 2.191622] usbcore: registered new interface driver snd_usb_podhd
- [ 2.204085] usbcore: registered new interface driver snd_usb_toneport
- [ 2.217072] usbcore: registered new interface driver snd_usb_variax
- [ 2.230180] NET: Registered protocol family 10
- [ 2.239708] mwifiex_sdio mmc0:0001:1: CMD_RESP: cmd 0x242 error, result=0x2
- [ 2.251097] Segment Routing with IPv6
- [ 2.251120] NET: Registered protocol family 17
- [ 2.251249] Bluetooth: RFCOMM TTY layer initialized
- [ 2.251254] Bluetooth: RFCOMM socket layer initialized
- [ 2.251263] Bluetooth: RFCOMM ver 1.11
- [ 2.297683] mwifiex_sdio mmc0:0001:1: mwifiex_process_cmdresp: cmd 0x242 failed during initialization
- [ 2.316976] microcode: CPU0: patch_level=0x07041001
- [ 2.326812] microcode: CPU1: patch_level=0x07041001
- [ 2.336624] microcode: CPU2: patch_level=0x07041001
- [ 2.346445] microcode: CPU3: patch_level=0x07041001
- [ 2.356287] microcode: CPU4: patch_level=0x07041001
- [ 2.357250] mwifiex_sdio mmc0:0001:1: info: MWIFIEX VERSION: mwifiex 1.0 (15.130.11.p14)
- [ 2.357253] mwifiex_sdio mmc0:0001:1: driver_version = mwifiex 1.0 (15.130.11.p14)
- [ 2.397983] microcode: CPU5: patch_level=0x07041001
- [ 2.407801] microcode: CPU6: patch_level=0x07041001
- [ 2.417641] microcode: CPU7: patch_level=0x07041001
- [ 2.427518] microcode: Microcode Update Driver: v2.2.
- [ 2.427537] AVX version of gcm_enc/dec engaged.
- [ 2.446811] AES CTR mode by8 optimization enabled
- [ 2.457251] sched_clock: Marking stable (2457241828, 0)->(3908742262, -1451500434)
- [ 2.473129] registered taskstats version 1
- [ 2.481749] radeon 0000:00:01.0: can't find IRQ for PCI INT A; please try using pci=biosirq
- [ 2.498743] [drm] initializing kernel modesetting (LIVERPOOL 0x1002:0x9924 0x1002:0x9924 0x11).
- [ 2.516293] [drm] doorbell mmio base: 0xE4000000
- [ 2.525582] [drm] doorbell mmio size: 8388608
- [ 2.534348] ACPI Exception: AE_BAD_PARAMETER, Thread 1982916608 could not acquire Mutex [0x2] (20170728/utmutex-290)
- [ 2.555544] ACPI Error: Mutex [0x2] is not acquired, cannot release (20170728/utmutex-326)
- [ 2.572255] ATOM BIOS: 113
- [ 2.577803] radeon 0000:00:01.0: VRAM: 1024M 0x0000000000000000 - 0x000000003FFFFFFF (1024M used)
- [ 2.595669] radeon 0000:00:01.0: GTT: 2048M 0x0000000040000000 - 0x00000000BFFFFFFF
- [ 2.611085] [drm] Detected VRAM RAM=1024M, BAR=64M
- [ 2.620722] [drm] RAM width 256bits DDR
- [ 2.628509] [TTM] Zone kernel: Available graphics memory: 3589594 kiB
- [ 2.641642] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
- [ 2.654777] [TTM] Initializing pool allocator
- [ 2.663543] [TTM] Initializing DMA pool allocator
- [ 2.673062] [drm] radeon: 1024M of VRAM memory ready
- [ 2.683047] [drm] radeon: 2048M of GTT memory ready.
- [ 2.693044] [drm] Loading liverpool Microcode
- [ 2.702060] [drm] GART: num cpu pages 524288, num gpu pages 524288
- [ 2.737978] [drm] PCIE GART of 2048M enabled (table at 0x0000000000040000).
- [ 2.752005] gb_addr_config=10000000
- [ 2.759276] radeon 0000:00:01.0: WB enabled
- [ 2.767704] radeon 0000:00:01.0: fence driver on ring 0 use gpu addr 0x0000000040000c00 and cpu addr 0xffff880274a7fc00
- [ 2.789424] radeon 0000:00:01.0: fence driver on ring 1 use gpu addr 0x0000000040000c04 and cpu addr 0xffff880274a7fc04
- [ 2.811144] radeon 0000:00:01.0: fence driver on ring 2 use gpu addr 0x0000000040000c08 and cpu addr 0xffff880274a7fc08
- [ 2.832864] radeon 0000:00:01.0: fence driver on ring 3 use gpu addr 0x0000000040000c0c and cpu addr 0xffff880274a7fc0c
- [ 2.854579] radeon 0000:00:01.0: fence driver on ring 4 use gpu addr 0x0000000040000c10 and cpu addr 0xffff880274a7fc10
- [ 2.876296] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 2.889601] [drm] Driver supports precise vblank timestamp query.
- [ 2.901971] radeon 0000:00:01.0: radeon: using MSI.
- [ 2.911830] [drm] radeon: irq initialized.
- [ 2.923106] [drm] ring test on 0 succeeded in 2 usecs
- [ 2.933341] [drm] ring test on 1 succeeded in 2 usecs
- [ 2.943514] [drm] ring test on 2 succeeded in 2 usecs
- [ 2.953894] [drm] ring test on 3 succeeded in 1 usecs
- [ 2.964057] [drm] ring test on 4 succeeded in 1 usecs
- [ 4.007532] [drm:cik_ib_test] *ERROR* radeon: fence wait timed out.
- [ 4.020157] [drm:radeon_ib_ring_tests] *ERROR* radeon: failed testing IB on GFX ring (-110).
- [ 4.037147] [drm:radeon_device_init] *ERROR* ib ring test failed (-110).
- [ 4.050842] i2c-dev: adapter [Radeon i2c bit bus 0x90] registered as minor 1
- [ 4.050860] i2c i2c-1: adapter [Radeon i2c bit bus 0x90] registered
- [ 4.050877] i2c i2c-1: found normal entry for adapter 1, addr 0x50
- [ 4.050885] i2c i2c-1: master_xfer[0] R, addr=0x50, len=1
- [ 4.054279] i2c i2c-1: i2c_outb: 0xa1, timeout at bit #7
- [ 4.062276] i2c i2c-1: i2c_outb: 0xa1, timeout at bit #7
- [ 4.070274] i2c i2c-1: i2c_outb: 0xa1, timeout at bit #7
- [ 4.078272] i2c i2c-1: i2c_outb: 0xa1, timeout at bit #7
- [ 4.078275] i2c i2c-1: Used 4 tries to read from client at 0x50: failed, timeout?
- [ 4.078277] i2c i2c-1: NAK from device addr 0x50 msg #0
- [ 4.082283] i2c i2c-1: found normal entry for adapter 1, addr 0x51
- [ 4.082286] i2c i2c-1: master_xfer[0] R, addr=0x51, len=1
- [ 4.086270] i2c i2c-1: i2c_outb: 0xa3, timeout at bit #7
- [ 4.094268] i2c i2c-1: i2c_outb: 0xa3, timeout at bit #7
- [ 4.102265] i2c i2c-1: i2c_outb: 0xa3, timeout at bit #7
- [ 4.110263] i2c i2c-1: i2c_outb: 0xa3, timeout at bit #7
- [ 4.110265] i2c i2c-1: Used 4 tries to read from client at 0x51: failed, timeout?
- [ 4.110267] i2c i2c-1: NAK from device addr 0x51 msg #0
- [ 4.114274] i2c i2c-1: found normal entry for adapter 1, addr 0x52
- [ 4.114277] i2c i2c-1: master_xfer[0] R, addr=0x52, len=1
- [ 4.118261] i2c i2c-1: i2c_outb: 0xa5, timeout at bit #7
- [ 4.126259] i2c i2c-1: i2c_outb: 0xa5, timeout at bit #7
- [ 4.134256] i2c i2c-1: i2c_outb: 0xa5, timeout at bit #7
- [ 4.142254] i2c i2c-1: i2c_outb: 0xa5, timeout at bit #7
- [ 4.142256] i2c i2c-1: Used 4 tries to read from client at 0x52: failed, timeout?
- [ 4.142258] i2c i2c-1: NAK from device addr 0x52 msg #0
- [ 4.146265] i2c i2c-1: found normal entry for adapter 1, addr 0x53
- [ 4.146268] i2c i2c-1: master_xfer[0] R, addr=0x53, len=1
- [ 4.150252] i2c i2c-1: i2c_outb: 0xa7, timeout at bit #7
- [ 4.158250] i2c i2c-1: i2c_outb: 0xa7, timeout at bit #7
- [ 4.166248] i2c i2c-1: i2c_outb: 0xa7, timeout at bit #7
- [ 4.174245] i2c i2c-1: i2c_outb: 0xa7, timeout at bit #7
- [ 4.174248] i2c i2c-1: Used 4 tries to read from client at 0x53: failed, timeout?
- [ 4.174249] i2c i2c-1: NAK from device addr 0x53 msg #0
- [ 4.178256] i2c i2c-1: found normal entry for adapter 1, addr 0x54
- [ 4.178259] i2c i2c-1: master_xfer[0] R, addr=0x54, len=1
- [ 4.182243] i2c i2c-1: i2c_outb: 0xa9, timeout at bit #7
- [ 4.190241] i2c i2c-1: i2c_outb: 0xa9, timeout at bit #7
- [ 4.198239] i2c i2c-1: i2c_outb: 0xa9, timeout at bit #7
- [ 4.206237] i2c i2c-1: i2c_outb: 0xa9, timeout at bit #7
- [ 4.206239] i2c i2c-1: Used 4 tries to read from client at 0x54: failed, timeout?
- [ 4.206241] i2c i2c-1: NAK from device addr 0x54 msg #0
- [ 4.210248] i2c i2c-1: found normal entry for adapter 1, addr 0x55
- [ 4.210250] i2c i2c-1: master_xfer[0] R, addr=0x55, len=1
- [ 4.214234] i2c i2c-1: i2c_outb: 0xab, timeout at bit #7
- [ 4.222232] i2c i2c-1: i2c_outb: 0xab, timeout at bit #7
- [ 4.230230] i2c i2c-1: i2c_outb: 0xab, timeout at bit #7
- [ 4.238228] i2c i2c-1: i2c_outb: 0xab, timeout at bit #7
- [ 4.238230] i2c i2c-1: Used 4 tries to read from client at 0x55: failed, timeout?
- [ 4.238232] i2c i2c-1: NAK from device addr 0x55 msg #0
- [ 4.242239] i2c i2c-1: found normal entry for adapter 1, addr 0x56
- [ 4.242242] i2c i2c-1: master_xfer[0] R, addr=0x56, len=1
- [ 4.246225] i2c i2c-1: i2c_outb: 0xad, timeout at bit #7
- [ 4.254223] i2c i2c-1: i2c_outb: 0xad, timeout at bit #7
- [ 4.262221] i2c i2c-1: i2c_outb: 0xad, timeout at bit #7
- [ 4.270219] i2c i2c-1: i2c_outb: 0xad, timeout at bit #7
- [ 4.270221] i2c i2c-1: Used 4 tries to read from client at 0x56: failed, timeout?
- [ 4.270223] i2c i2c-1: NAK from device addr 0x56 msg #0
- [ 4.274230] i2c i2c-1: found normal entry for adapter 1, addr 0x57
- [ 4.274233] i2c i2c-1: master_xfer[0] R, addr=0x57, len=1
- [ 4.278217] i2c i2c-1: i2c_outb: 0xaf, timeout at bit #7
- [ 4.286215] i2c i2c-1: i2c_outb: 0xaf, timeout at bit #7
- [ 4.294212] i2c i2c-1: i2c_outb: 0xaf, timeout at bit #7
- [ 4.302210] i2c i2c-1: i2c_outb: 0xaf, timeout at bit #7
- [ 4.302212] i2c i2c-1: Used 4 tries to read from client at 0x57: failed, timeout?
- [ 4.302214] i2c i2c-1: NAK from device addr 0x57 msg #0
- [ 4.306311] i2c-dev: adapter [Radeon i2c bit bus 0x91] registered as minor 2
- [ 4.306317] i2c i2c-2: adapter [Radeon i2c bit bus 0x91] registered
- [ 4.306326] i2c i2c-2: found normal entry for adapter 2, addr 0x50
- [ 4.306329] i2c i2c-2: master_xfer[0] R, addr=0x50, len=1
- [ 4.310229] i2c i2c-2: i2c_outb: 0xa1, timeout at bit #7
- [ 4.318226] i2c i2c-2: i2c_outb: 0xa1, timeout at bit #7
- [ 4.326224] i2c i2c-2: i2c_outb: 0xa1, timeout at bit #7
- [ 4.334222] i2c i2c-2: i2c_outb: 0xa1, timeout at bit #7
- [ 4.334224] i2c i2c-2: Used 4 tries to read from client at 0x50: failed, timeout?
- [ 4.334226] i2c i2c-2: NAK from device addr 0x50 msg #0
- [ 4.338233] i2c i2c-2: found normal entry for adapter 2, addr 0x51
- [ 4.338236] i2c i2c-2: master_xfer[0] R, addr=0x51, len=1
- [ 4.342220] i2c i2c-2: i2c_outb: 0xa3, timeout at bit #7
- [ 4.350218] i2c i2c-2: i2c_outb: 0xa3, timeout at bit #7
- [ 4.358215] i2c i2c-2: i2c_outb: 0xa3, timeout at bit #7
- [ 4.366213] i2c i2c-2: i2c_outb: 0xa3, timeout at bit #7
- [ 4.366215] i2c i2c-2: Used 4 tries to read from client at 0x51: failed, timeout?
- [ 4.366217] i2c i2c-2: NAK from device addr 0x51 msg #0
- [ 4.370224] i2c i2c-2: found normal entry for adapter 2, addr 0x52
- [ 4.370227] i2c i2c-2: master_xfer[0] R, addr=0x52, len=1
- [ 4.374211] i2c i2c-2: i2c_outb: 0xa5, timeout at bit #7
- [ 4.382208] i2c i2c-2: i2c_outb: 0xa5, timeout at bit #7
- [ 4.390206] i2c i2c-2: i2c_outb: 0xa5, timeout at bit #7
- [ 4.398205] i2c i2c-2: i2c_outb: 0xa5, timeout at bit #7
- [ 4.398207] i2c i2c-2: Used 4 tries to read from client at 0x52: failed, timeout?
- [ 4.398209] i2c i2c-2: NAK from device addr 0x52 msg #0
- [ 4.402216] i2c i2c-2: found normal entry for adapter 2, addr 0x53
- [ 4.402218] i2c i2c-2: master_xfer[0] R, addr=0x53, len=1
- [ 4.406202] i2c i2c-2: i2c_outb: 0xa7, timeout at bit #7
- [ 4.414200] i2c i2c-2: i2c_outb: 0xa7, timeout at bit #7
- [ 4.422197] i2c i2c-2: i2c_outb: 0xa7, timeout at bit #7
- [ 4.430195] i2c i2c-2: i2c_outb: 0xa7, timeout at bit #7
- [ 4.430198] i2c i2c-2: Used 4 tries to read from client at 0x53: failed, timeout?
- [ 4.430199] i2c i2c-2: NAK from device addr 0x53 msg #0
- [ 4.434207] i2c i2c-2: found normal entry for adapter 2, addr 0x54
- [ 4.434210] i2c i2c-2: master_xfer[0] R, addr=0x54, len=1
- [ 4.438194] i2c i2c-2: i2c_outb: 0xa9, timeout at bit #7
- [ 4.446191] i2c i2c-2: i2c_outb: 0xa9, timeout at bit #7
- [ 4.454189] i2c i2c-2: i2c_outb: 0xa9, timeout at bit #7
- [ 4.462187] i2c i2c-2: i2c_outb: 0xa9, timeout at bit #7
- [ 4.462189] i2c i2c-2: Used 4 tries to read from client at 0x54: failed, timeout?
- [ 4.462191] i2c i2c-2: NAK from device addr 0x54 msg #0
- [ 4.466198] i2c i2c-2: found normal entry for adapter 2, addr 0x55
- [ 4.466201] i2c i2c-2: master_xfer[0] R, addr=0x55, len=1
- [ 4.470184] i2c i2c-2: i2c_outb: 0xab, timeout at bit #7
- [ 4.478182] i2c i2c-2: i2c_outb: 0xab, timeout at bit #7
- [ 4.486180] i2c i2c-2: i2c_outb: 0xab, timeout at bit #7
- [ 4.494178] i2c i2c-2: i2c_outb: 0xab, timeout at bit #7
- [ 4.494180] i2c i2c-2: Used 4 tries to read from client at 0x55: failed, timeout?
- [ 4.494182] i2c i2c-2: NAK from device addr 0x55 msg #0
- [ 4.498189] i2c i2c-2: found normal entry for adapter 2, addr 0x56
- [ 4.498192] i2c i2c-2: master_xfer[0] R, addr=0x56, len=1
- [ 4.502176] i2c i2c-2: i2c_outb: 0xad, timeout at bit #7
- [ 4.510174] i2c i2c-2: i2c_outb: 0xad, timeout at bit #7
- [ 4.518172] i2c i2c-2: i2c_outb: 0xad, timeout at bit #7
- [ 4.526169] i2c i2c-2: i2c_outb: 0xad, timeout at bit #7
- [ 4.526171] i2c i2c-2: Used 4 tries to read from client at 0x56: failed, timeout?
- [ 4.526173] i2c i2c-2: NAK from device addr 0x56 msg #0
- [ 4.530180] i2c i2c-2: found normal entry for adapter 2, addr 0x57
- [ 4.530183] i2c i2c-2: master_xfer[0] R, addr=0x57, len=1
- [ 4.534167] i2c i2c-2: i2c_outb: 0xaf, timeout at bit #7
- [ 4.542165] i2c i2c-2: i2c_outb: 0xaf, timeout at bit #7
- [ 4.550163] i2c i2c-2: i2c_outb: 0xaf, timeout at bit #7
- [ 4.558160] i2c i2c-2: i2c_outb: 0xaf, timeout at bit #7
- [ 4.558163] i2c i2c-2: Used 4 tries to read from client at 0x57: failed, timeout?
- [ 4.558164] i2c i2c-2: NAK from device addr 0x57 msg #0
- [ 4.562439] i2c-dev: adapter [card0-HDMI-A-1] registered as minor 3
- [ 4.562445] i2c i2c-3: adapter [card0-HDMI-A-1] registered
- [ 4.562454] i2c i2c-3: found normal entry for adapter 3, addr 0x50
- [ 4.562457] i2c i2c-3: master_xfer[0] R, addr=0x50, len=1
- [ 4.565364] i2c i2c-3: Creating eeprom at 0x50
- [ 4.565402] eeprom 3-0050: probe
- [ 4.565424] i2c i2c-3: client [eeprom] registered with bus id 3-0050
- [ 4.565426] i2c i2c-3: found normal entry for adapter 3, addr 0x51
- [ 4.565430] i2c i2c-3: master_xfer[0] R, addr=0x51, len=1
- [ 4.567362] i2c i2c-3: found normal entry for adapter 3, addr 0x52
- [ 4.567366] i2c i2c-3: master_xfer[0] R, addr=0x52, len=1
- [ 4.569362] i2c i2c-3: found normal entry for adapter 3, addr 0x53
- [ 4.569366] i2c i2c-3: master_xfer[0] R, addr=0x53, len=1
- [ 4.571361] i2c i2c-3: found normal entry for adapter 3, addr 0x54
- [ 4.571365] i2c i2c-3: master_xfer[0] R, addr=0x54, len=1
- [ 4.573384] i2c i2c-3: found normal entry for adapter 3, addr 0x55
- [ 4.573387] i2c i2c-3: master_xfer[0] R, addr=0x55, len=1
- [ 4.575383] i2c i2c-3: found normal entry for adapter 3, addr 0x56
- [ 4.575386] i2c i2c-3: master_xfer[0] R, addr=0x56, len=1
- [ 4.577383] i2c i2c-3: found normal entry for adapter 3, addr 0x57
- [ 4.577386] i2c i2c-3: master_xfer[0] R, addr=0x57, len=1
- [ 4.579362] [drm] Radeon Display Connectors
- [ 4.587775] [drm] Connector 0:
- [ 4.593908] [drm] HDMI-A-1
- [ 4.599693] [drm] HPD1
- [ 4.604780] [drm] DDC: 0x6530 0x6530 0x6534 0x6534 0x6538 0x6538 0x653c 0x653c
- [ 4.619666] [drm] Encoders:
- [ 4.625625] [drm] DFP1: INTERNAL_UNIPHY
- [ 4.651961] [drm] fb mappable at 0xE0454000
- [ 4.660373] [drm] vram apper at 0xE0000000
- [ 4.668607] [drm] size 8294400
- [ 4.674740] [drm] fb depth is 24
- [ 4.681217] [drm] pitch is 7680
- [ 4.688184] fbcon: radeondrmfb (fb0) is primary device
- [ 4.733345] [drm:radeon_dp_link_train] *ERROR* clock recovery tried 5 times
- [ 4.733347] [drm:radeon_dp_link_train] *ERROR* clock recovery failed
- [ 4.937091] Console: switching to colour frame buffer device 320x108
- [ 4.999191] radeon 0000:00:01.0: fb0: radeondrmfb frame buffer device
- [ 5.012193] [drm] Initialized radeon 2.50.0 20080528 for 0000:00:01.0 on minor 0
- [ 5.027177] ahci 0000:00:14.2: version 3.0
- [ 5.027241] ahci 0000:00:14.2: apcie_assign_irqs(1)
- [ 5.027272] apcie_msi_init(ffff880275a49d00, ffffffff82469b40, 31, 0x200, ffff8802754b3c58)
- [ 5.027278] ahci 0000:00:14.2: apcie_assign_irqs returning 1
- [ 5.027308] ahci 0000:00:14.2: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl unknown mode
- [ 5.044161] ahci 0000:00:14.2: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
- [ 5.060610] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 0000001c) mask=0x1 irq=31 hwirq=0x200 ffff880275b44800
- [ 5.060613] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 2, subfunc: 0, addr fee00000 data: 0x0000001c (28)
- [ 5.060916] scsi host0: ahci
- [ 5.066789] ata1: SATA max UDMA/133 abar m4096@0xc8001000 port 0xc8001100 irq 31
- [ 5.081841] console [netcon0] enabled
- [ 5.089222] netconsole: network logging started
- [ 5.098420] ALSA device list:
- [ 5.104394] #0: HD-Audio Generic at 0xe4840000 irq 29
- [ 5.115343] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000013) mask=0x80000 irq=20 hwirq=0x413 ffff880275b44800
- [ 5.115346] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 4, subfunc: 19, addr fee00000 data: 0x00000013 (19)
- [ 5.551080] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 5.564013] ata1.00: ATAPI: SONY PS-SYSTEM 410R, 4010, max UDMA/133
- [ 5.578393] ata1.00: configured for UDMA/133
- [ 5.590660] scsi 0:0:0:0: CD-ROM SONY PS-SYSTEM 410R 4010 PQ: 0 ANSI: 5
- [ 5.621365] sr 0:0:0:0: [sr0] scsi3-mmc drive: 0x/0x cd/rw xa/form2 cdda tray
- [ 5.635758] cdrom: Uniform CD-ROM driver Revision: 3.20
- [ 5.646563] sr 0:0:0:0: Attached scsi CD-ROM sr0
- [ 5.646698] sr 0:0:0:0: Attached scsi generic sg0 type 5
- [ 5.659235] Freeing unused kernel memory: 896K
- [ 5.668205] Write protecting the kernel read-only data: 20480k
- [ 5.681399] Freeing unused kernel memory: 2012K
- [ 5.693150] Freeing unused kernel memory: 588K
- [ 5.702126] rodata_test: all tests were successful
- [ 7.150714] Bluetooth: module_cfg_cmd(f1) failed
- [ 24.531417] random: crng init done
- [ 93.055131] usb 1-2.2: new full-speed USB device number 3 using xhci_aeolia
- [ 93.133776] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c52b
- [ 93.133779] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 93.133782] usb 1-2.2: Product: USB Receiver
- [ 93.133784] usb 1-2.2: Manufacturer: Logitech
- [ 93.143765] logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.7-2.2/input2
- [ 93.259466] input: Logitech MX Ergo as /devices/pci0000:00/0000:00:14.7/usb1/1-2/1-2.2/1-2.2:1.2/0003:046D:C52B.0003/0003:046D:406F.0004/input/input3
- [ 93.259808] logitech-hidpp-device 0003:046D:406F.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech MX Ergo] on usb-0000:00:14.7-2.2:1
- [ 93.267301] input: Logitech K800 as /devices/pci0000:00/0000:00:14.7/usb1/1-2/1-2.2/1-2.2:1.2/0003:046D:C52B.0003/0003:046D:2010.0005/input/input4
- [ 93.267489] logitech-hidpp-device 0003:046D:2010.0005: input,hidraw2: USB HID v1.11 Keyboard [Logitech K800] on usb-0000:00:14.7-2.2:2
- [ 95.625149] logitech-hidpp-device 0003:046D:2010.0005: HID++ 1.0 device connected.
- [ 175.330390] usb 2-1: new SuperSpeed USB device number 3 using xhci_aeolia
- [ 175.343646] usb 2-1: New USB device found, idVendor=0781, idProduct=5581
- [ 175.343649] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
- [ 175.343652] usb 2-1: Product: SanDisk Ultra
- [ 175.343654] usb 2-1: Manufacturer: SanDisk
- [ 175.343656] usb 2-1: SerialNumber: A20046C527036F81
- [ 175.344061] usb-storage 2-1:1.0: USB Mass Storage device detected
- [ 175.344322] scsi host1: usb-storage 2-1:1.0
- [ 176.384214] bounce: isa pool size: 16 pages
- [ 176.384562] scsi 1:0:0:0: Direct-Access SanDisk SanDisk Ultra PMAP PQ: 0 ANSI: 6
- [ 176.384814] sd 1:0:0:0: Attached scsi generic sg1 type 0
- [ 176.385040] sd 1:0:0:0: [sda] 30965760 512-byte logical blocks: (15.9 GB/14.8 GiB)
- [ 176.385860] sd 1:0:0:0: [sda] Write Protect is off
- [ 176.385863] sd 1:0:0:0: [sda] Mode Sense: 2b 00 00 08
- [ 176.386683] sd 1:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
- [ 176.453776] sda: sda1 sda2
- [ 176.456395] sd 1:0:0:0: [sda] Attached SCSI removable disk
- [ 212.348120] EXT4-fs (sda2): couldn't mount as ext3 due to feature incompatibilities
- [ 212.348817] EXT4-fs (sda2): couldn't mount as ext2 due to feature incompatibilities
- [ 212.358334] EXT4-fs (sda2): mounted filesystem with writeback data mode. Opts: (null)
- [ 270.932200] systemd[1]: System time before build time, advancing clock.
- [ 270.964410] systemd[1]: systemd 238 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN +PCRE2 default-hierarchy=hybrid)
- [ 270.977277] systemd[1]: Detected architecture x86-64.
- [ 270.989101] systemd[1]: Set hostname to <ps4>.
- [ 271.338896] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:35 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
- [ 271.338903] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
- [ 271.459645] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 271.471461] systemd[1]: Listening on LVM2 metadata daemon socket.
- [ 271.477213] systemd[1]: Reached target Swap.
- [ 271.483552] systemd[1]: Listening on Journal Audit Socket.
- [ 271.490334] systemd[1]: Listening on Device-mapper event daemon FIFOs.
- [ 271.836305] EXT4-fs (sda2): re-mounted. Opts: data=writeback
- [ 271.937706] systemd-journald[290]: Received request to flush runtime journal from PID 1
- [ 271.962266] systemd-journald[290]: File /var/log/journal/369c6df4baaa4bae98e2f58cd09a1111/system.journal corrupted or uncleanly shut down, renaming and replacing.
- [ 275.541844] audit: type=1006 audit(1525267006.924:2): pid=427 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=1 res=1
- [ 275.630070] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 275.631344] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000017) mask=0x1 irq=24 hwirq=0x100 ffff880275b44800
- [ 275.631348] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 1, subfunc: 0, addr fee00000 data: 0x00000017 (23)
- [ 275.631634] sky2 0000:00:14.1 eth0: enabling interface
- [ 275.631824] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 275.642326] IPv6: ADDRCONF(NETDEV_UP): mlan0: link is not ready
- [ 275.644109] IPv6: ADDRCONF(NETDEV_UP): mlan0: link is not ready
- [ 275.648218] IPv6: ADDRCONF(NETDEV_UP): mlan0: link is not ready
- [ 275.981088] audit: type=1006 audit(1525267007.364:3): pid=447 uid=0 old-auid=4294967295 auid=120 tty=(none) old-ses=4294967295 ses=2 res=1
- [ 276.068976] IPv6: ADDRCONF(NETDEV_UP): mlan0: link is not ready
- [ 278.071697] sky2 0000:00:14.1 eth0: Link is up at 1000 Mbps, full duplex, flow control both
- [ 278.071727] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 278.264411] audit: type=1006 audit(1525267009.648:4): pid=512 uid=0 old-auid=4294967295 auid=120 tty=(none) old-ses=4294967295 ses=3 res=1
- [ 278.910747] logitech-hidpp-device 0003:046D:406F.0004: HID++ 4.5 device connected.
- [ 280.448158] aeolia_pcie 0000:00:14.4: apcie_msi_write_msg(fee00000, 00000013) mask=0x80000 irq=20 hwirq=0x413 ffff880275b44800
- [ 280.448166] aeolia_pcie 0000:00:14.4: apcie_config_msi: func: 4, subfunc: 19, addr fee00000 data: 0x00000013 (19)
- [ 281.480412] snd_hda_intel 0000:00:01.1: IRQ timing workaround is activated for card #0. Suggest a bigger bdl_pos_adj.
- [ 293.374496] audit: type=1006 audit(1525267024.757:5): pid=1103 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=4 res=1
- [ 293.604135] [drm:radeon_dp_link_train] *ERROR* clock recovery tried 5 times
- [ 293.604140] [drm:radeon_dp_link_train] *ERROR* clock recovery failed
- [ 293.834050] [drm:radeon_dp_link_train] *ERROR* clock recovery tried 5 times
- [ 293.834053] [drm:radeon_dp_link_train] *ERROR* clock recovery failed
- [ 299.577408] rfkill: input handler disabled
- [ 306.513930] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
- [ 343.218323] IPv6: ADDRCONF(NETDEV_UP): mlan0: link is not ready
- [ 375.017246] IPv6: ADDRCONF(NETDEV_UP): mlan0: link is not ready
- [ 375.021735] IPv6: ADDRCONF(NETDEV_UP): mlan0: link is not ready
- [ 573.079363] IPv6: ADDRCONF(NETDEV_UP): mlan0: link is not ready
- [ 573.112311] IPv6: ADDRCONF(NETDEV_UP): mlan0: link is not ready
- [ 675.006208] IPv6: ADDRCONF(NETDEV_UP): mlan0: link is not ready
- [ 759.754279] usb 1-2.2: USB disconnect, device number 3
- [ 759.990209] usb 1-2.2: new full-speed USB device number 4 using xhci_aeolia
- [ 760.068946] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c52b
- [ 760.068952] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 760.068955] usb 1-2.2: Product: USB Receiver
- [ 760.068960] usb 1-2.2: Manufacturer: Logitech
- [ 760.079039] logitech-djreceiver 0003:046D:C52B.0008: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.7-2.2/input2
- [ 760.274658] input: Logitech MX Ergo as /devices/pci0000:00/0000:00:14.7/usb1/1-2/1-2.2/1-2.2:1.2/0003:046D:C52B.0008/0003:046D:406F.0009/input/input5
- [ 760.275130] logitech-hidpp-device 0003:046D:406F.0009: input,hidraw1: USB HID v1.11 Keyboard [Logitech MX Ergo] on usb-0000:00:14.7-2.2:1
- [ 760.290386] logitech-hidpp-device 0003:046D:406F.0009: HID++ 4.5 device connected.
- [ 760.778268] usb 1-2.2: USB disconnect, device number 4
- [ 765.727234] logitech-hidpp-device 0003:046D:406F.0009: unable to retrieve the name of the device
- [ 765.727250] logitech-hidpp-device 0003:046D:406F.0009: unable to retrieve the name of the device
- [ 989.999827] IPv6: ADDRCONF(NETDEV_UP): mlan0: link is not ready
- [ 1304.995533] IPv6: ADDRCONF(NETDEV_UP): mlan0: link is not ready
- [ 1619.994020] IPv6: ADDRCONF(NETDEV_UP): mlan0: link is not ready
- [ 1720.575794] [drm:radeon_dp_link_train] *ERROR* clock recovery tried 5 times
- [ 1720.575800] [drm:radeon_dp_link_train] *ERROR* clock recovery failed
- [ 1720.784784] [drm:radeon_dp_link_train] *ERROR* clock recovery tried 5 times
- [ 1720.784791] [drm:radeon_dp_link_train] *ERROR* clock recovery failed
- [ 1881.019915] audit: type=1006 audit(1525269183.989:6): pid=4664 uid=0 old-auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=5 res=1
- [ 1934.988624] IPv6: ADDRCONF(NETDEV_UP): mlan0: link is not ready
- [ 2249.986497] IPv6: ADDRCONF(NETDEV_UP): mlan0: link is not ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement