Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- U-Boot SPL 2020.10-dirty (Nov 14 2020 - 18:38:30 +0300)
- DRAM: 1024 MiB
- Trying to boot from MMC1
- U-Boot 2020.10-dirty (Nov 14 2020 - 18:38:30 +0300) Allwinner Technology
- CPU: Allwinner A31s (SUN6I)
- Model: Sinovoip BPI-M2
- DRAM: 1 GiB
- MMC: mmc@1c0f000: 0, mmc@1c11000: 1
- Loading Environment from FAT... Unable to use mmc 0:1... EDID block 0: checksum error, retrying
- EDID block 0: checksum error, retrying
- EDID block 0: checksum error
- In: serial
- Out: serial
- Err: serial
- Net: eth0: ethernet@1c30000
- starting USB...
- Bus usb@1c1a000: USB EHCI 1.00
- Bus usb@1c1a400: USB OHCI 1.0
- scanning bus usb@1c1a000 for devices... 2 USB Device(s) found
- scanning bus usb@1c1a400 for devices... 1 USB Device(s) found
- scanning usb for storage devices... 0 Storage Device(s) found
- Hit any key to stop autoboot: 0
- switch to partitions #0, OK
- mmc0 is current device
- Scanning mmc 0:1...
- Found U-Boot script /boot/boot.scr
- 2124 bytes read in 3 ms (691.4 KiB/s)
- ## Executing script at 43100000
- Boot script loaded from mmc
- 114 bytes read in 1 ms (111.3 KiB/s)
- 4411400 bytes read in 197 ms (21.4 MiB/s)
- 26019 bytes read in 4 ms (6.2 MiB/s)
- ## Flattened Device Tree blob at 46000000
- Booting using the fdt blob at 0x46000000
- Loading Device Tree to 49f91000, end 49ffffff ... OK
- Starting kernel ...
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 5.7.19-sunxi (sergey@hanni-desktop-ubuntu) (gcc version 7.5.0 (Linaro GCC 7.5-2019.12), GNU ld (Linaro_Binutils-2019.12) 2.28.2.20170706) #1 SMP Sat Nov 14 0
- [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: div instructions available: patching division code
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] OF: fdt: Machine model: Sinovoip BPI-M2
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] cma: Reserved 16 MiB at 0x7f000000
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
- [ 0.000000] percpu: Embedded 15 pages/cpu s30668 r8192 d22580 u61440
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 260608
- [ 0.000000] Kernel command line: console=ttyS0,115200 root=/dev/mmcblk0p1 console=tty1 net.ifnames=0 ipv6.disable=1 consoleblank=0 loglevel=7 earlyprintk rootfstype=ext4 rootwait pa
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 1011868K/1048576K available (7168K kernel code, 489K rwdata, 1772K rodata, 1024K init, 249K bss, 20324K reserved, 16384K cma-reserved, 245760K highmem)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
- [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
- [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- [ 0.000000] GIC: Using split EOI/Deactivate mode
- [ 0.000000] random: get_random_bytes called from start_kernel+0x30c/0x49c with crng_init=0
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.000016] Switching to timer-based delay loop, resolution 41ns
- [ 0.000257] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
- [ 0.000426] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 9556302233 ns
- [ 0.000764] Console: colour dummy device 80x30
- [ 0.001101] printk: console [tty1] enabled
- [ 0.001146] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
- [ 0.001172] pid_max: default: 32768 minimum: 301
- [ 0.001306] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
- [ 0.001336] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
- [ 0.001995] CPU: Testing write buffer coherency: ok
- [ 0.002282] /cpus/cpu@0 missing clock-frequency property
- [ 0.002311] /cpus/cpu@1 missing clock-frequency property
- [ 0.002335] /cpus/cpu@2 missing clock-frequency property
- [ 0.002358] /cpus/cpu@3 missing clock-frequency property
- [ 0.002375] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.002825] Setting up static identity map for 0x40100000 - 0x40100060
- [ 0.002941] rcu: Hierarchical SRCU implementation.
- [ 0.003362] smp: Bringing up secondary CPUs ...
- [ 0.013943] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.024596] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.035175] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.035251] smp: Brought up 1 node, 4 CPUs
- [ 0.035303] SMP: Total of 4 processors activated (192.00 BogoMIPS).
- [ 0.035316] CPU: All CPU(s) started in HYP mode.
- [ 0.035327] CPU: Virtualization extensions available.
- [ 0.035840] devtmpfs: initialized
- [ 0.041231] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 3
- [ 0.041440] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.041472] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
- [ 0.042163] pinctrl core: initialized pinctrl subsystem
- [ 0.042626] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.043258] NET: Registered protocol family 16
- [ 0.044495] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.045544] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.045565] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.058742] SCSI subsystem initialized
- [ 0.059078] usbcore: registered new interface driver usbfs
- [ 0.059130] usbcore: registered new interface driver hub
- [ 0.059184] usbcore: registered new device driver usb
- [ 0.059348] pps_core: LinuxPPS API ver. 1 registered
- [ 0.059363] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.059393] PTP clock support registered
- [ 0.059620] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.060464] clocksource: Switched to clocksource arch_sys_counter
- [ 0.067092] NET: Registered protocol family 2
- [ 0.067537] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
- [ 0.067578] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
- [ 0.067678] TCP bind hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 0.067800] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.067908] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
- [ 0.067968] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
- [ 0.068153] NET: Registered protocol family 1
- [ 0.068584] RPC: Registered named UNIX socket transport module.
- [ 0.068605] RPC: Registered udp transport module.
- [ 0.068617] RPC: Registered tcp transport module.
- [ 0.068628] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.069158] hw perfevents: no interrupt-affinity property for /pmu, guessing.
- [ 0.069442] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
- [ 0.070587] workingset: timestamp_bits=30 max_order=18 bucket_order=0
- [ 0.076677] NFS: Registering the id_resolver key type
- [ 0.076724] Key type id_resolver registered
- [ 0.076737] Key type id_legacy registered
- [ 0.076836] bounce: pool size: 64 pages
- [ 0.076876] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
- [ 0.076896] io scheduler mq-deadline registered
- [ 0.076909] io scheduler kyber registered
- [ 0.082814] sun6i-a31-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
- [ 0.083035] sun6i-a31-r-pinctrl 1f02c00.pinctrl: Reset controller missing
- [ 0.127059] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
- [ 0.128608] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-ph not found, using dummy regulator
- [ 0.129288] printk: console [ttyS0] disabled
- [ 0.149456] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 46, base_baud = 1500000) is a U6_16550A
- [ 0.794065] printk: console [ttyS0] enabled
- [ 0.803505] libphy: Fixed MDIO Bus: probed
- [ 0.807929] CAN device driver interface
- [ 0.812179] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator
- [ 0.820868] sun7i-dwmac 1c30000.ethernet: IRQ eth_wake_irq not found
- [ 0.827226] sun7i-dwmac 1c30000.ethernet: IRQ eth_lpi not found
- [ 0.833233] sun7i-dwmac 1c30000.ethernet: PTP uses main clock
- [ 0.839500] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.846058] ehci-platform: EHCI generic platform driver
- [ 0.851439] ehci-platform 1c1a000.usb: EHCI Host Controller
- [ 0.857033] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
- [ 0.865064] ehci-platform 1c1a000.usb: irq 33, io mem 0x01c1a000
- [ 0.900473] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
- [ 0.907222] hub 1-0:1.0: USB hub found
- [ 0.911023] hub 1-0:1.0: 1 port detected
- [ 0.915353] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 0.921559] ohci-platform: OHCI generic platform driver
- [ 0.926926] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
- [ 0.933570] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
- [ 0.941425] ohci-platform 1c1a400.usb: irq 34, io mem 0x01c1a400
- [ 1.015012] hub 2-0:1.0: USB hub found
- [ 1.018793] hub 2-0:1.0: 1 port detected
- [ 1.024479] sun6i-rtc 1f00000.rtc: registered as rtc0
- [ 1.029569] sun6i-rtc 1f00000.rtc: setting system clock to 1970-01-01T00:00:12 UTC (12)
- [ 1.037590] sun6i-rtc 1f00000.rtc: RTC enabled
- [ 1.042242] i2c /dev entries driver
- [ 1.046873] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
- [ 1.055326] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
- [ 1.064159] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pc not found, using dummy regulator
- [ 1.073132] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pg not found, using dummy regulator
- [ 1.082196] sun4i-ss 1c15000.crypto-engine: Die ID 5
- [ 1.088597] usbcore: registered new interface driver usbhid
- [ 1.094198] usbhid: USB HID core driver
- [ 1.099154] NET: Registered protocol family 17
- [ 1.103651] can: controller area network core (rev 20170425 abi 9)
- [ 1.109897] NET: Registered protocol family 29
- [ 1.114356] can: raw protocol (rev 20170425)
- [ 1.118628] can: broadcast manager protocol (rev 20170425 t)
- [ 1.124310] can: netlink gateway (rev 20190810) max_hops=1
- [ 1.129974] Key type dns_resolver registered
- [ 1.134457] Registering SWP/SWPB emulation handler
- [ 1.153240] sun6i-a31-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
- [ 1.160913] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator
- [ 1.169585] sun7i-dwmac 1c30000.ethernet: IRQ eth_wake_irq not found
- [ 1.175976] sun7i-dwmac 1c30000.ethernet: IRQ eth_lpi not found
- [ 1.181985] sun7i-dwmac 1c30000.ethernet: PTP uses main clock
- [ 1.188251] sun6i-a31-r-pinctrl 1f02c00.pinctrl: supply vcc-pl not found, using dummy regulator
- [ 1.197532] axp20x-i2c 0-0068: AXP20x variant AXP221 found
- [ 1.213015] input: axp20x-pek as /devices/platform/soc/1f03400.i2c/i2c-0/0-0068/axp221-pek/input/input0
- [ 1.237832] dcdc1: supplied by regulator-dummy
- [ 1.243618] dcdc2: supplied by regulator-dummy
- [ 1.248818] dcdc3: supplied by regulator-dummy
- [ 1.254033] dcdc4: supplied by regulator-dummy
- [ 1.259230] dcdc5: supplied by regulator-dummy
- [ 1.264437] dc1sw: supplied by vdd-3v0
- [ 1.268392] dc5ldo: supplied by vcc-dram
- [ 1.273086] aldo1: supplied by regulator-dummy
- [ 1.278263] aldo2: supplied by regulator-dummy
- [ 1.283325] vcc-gmac: Bringing 1800000uV into 2500000-2500000uV
- [ 1.290011] aldo3: supplied by regulator-dummy
- [ 1.295735] eldo1: supplied by vdd-3v0
- [ 1.300057] vdd-csi: Bringing 700000uV into 1800000-1800000uV
- [ 1.305842] usb 1-1: new high-speed USB device number 2 using ehci-platform
- [ 1.313623] eldo2: supplied by vdd-3v0
- [ 1.318098] eldo3: supplied by vdd-3v0
- [ 1.322632] dldo1: supplied by regulator-dummy
- [ 1.327812] dldo2: supplied by regulator-dummy
- [ 1.332851] avdd-csi: Bringing 700000uV into 2800000-2800000uV
- [ 1.339466] dldo3: supplied by regulator-dummy
- [ 1.344522] vcc-pb: Bringing 700000uV into 3300000-3300000uV
- [ 1.351521] dldo4: supplied by regulator-dummy
- [ 1.356714] rtc_ldo: supplied by regulator-dummy
- [ 1.361551] ldo_io0: supplied by regulator-dummy
- [ 1.366927] ldo_io1: supplied by regulator-dummy
- [ 1.372141] vcc-pm-cpus: Bringing 3800000uV into 1800000-1800000uV
- [ 1.380761] drivevbus: supplied by regulator-dummy
- [ 1.386002] axp20x-adc axp22x-adc: DMA mask not set
- [ 1.392321] axp20x-i2c 0-0068: AXP20X driver loaded
- [ 1.397713] Registered IR keymap rc-empty
- [ 1.401822] rc rc0: sunxi-ir as /devices/platform/soc/1f02000.ir/rc/rc0
- [ 1.408548] input: sunxi-ir as /devices/platform/soc/1f02000.ir/rc/rc0/input1
- [ 1.415982] sunxi-ir 1f02000.ir: initialized sunXi IR driver
- [ 1.423210] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pf not found, using dummy regulator
- [ 1.432321] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pa not found, using dummy regulator
- [ 1.440932] sunxi-mmc 1c0f000.mmc: Got CD GPIO
- [ 1.470603] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
- [ 1.477967] sun6i-a31-pinctrl 1c20800.pinctrl: supply vcc-pc not found, using dummy regulator
- [ 1.486981] sunxi-mmc 1c11000.mmc: allocated mmc-pwrseq
- [ 1.511612] hub 1-1:1.0: USB hub found
- [ 1.515430] sunxi-mmc 1c11000.mmc: initialized, max. request size: 16384 KB
- [ 1.522843] sun7i-dwmac 1c30000.ethernet: IRQ eth_wake_irq not found
- [ 1.529200] sun7i-dwmac 1c30000.ethernet: IRQ eth_lpi not found
- [ 1.535234] sun7i-dwmac 1c30000.ethernet: PTP uses main clock
- [ 1.541189] hub 1-1:1.0: 4 ports detected
- [ 1.545294] sun7i-dwmac 1c30000.ethernet: Version ID not available
- [ 1.551529] sun7i-dwmac 1c30000.ethernet: DWMAC1000
- [ 1.556498] sun7i-dwmac 1c30000.ethernet: DMA HW capability register supported
- [ 1.563745] sun7i-dwmac 1c30000.ethernet: Normal descriptors
- [ 1.569411] sun7i-dwmac 1c30000.ethernet: Ring mode enabled
- [ 1.575406] libphy: stmmac: probed
- [ 1.585022] mmc0: host does not support reading read-only switch, assuming write-enable
- [ 1.594900] mmc0: new high speed SDHC card at address 0001
- [ 1.601053] mmcblk0: mmc0:0001 EB1QT 29.8 GiB
- [ 1.607441] mmcblk0: p1
- [ 1.615306] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 1.622306] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 1.628821] ALSA device list:
- [ 1.631830] No soundcards found.
- [ 1.636882] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 1.642805] EXT4-fs (mmcblk0p1): INFO: recovery required on readonly filesystem
- [ 1.650119] EXT4-fs (mmcblk0p1): write access will be enabled during recovery
- [ 1.660021] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 1.679649] random: fast init done
- [ 1.684493] mmc1: new high speed SDIO card at address 0001
- [ 1.833204] EXT4-fs (mmcblk0p1): recovery complete
- [ 1.842922] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
- [ 1.851094] VFS: Mounted root (ext4 filesystem) readonly on device 179:1.
- [ 1.859692] devtmpfs: mounted
- [ 1.863716] Freeing unused kernel memory: 1024K
- [ 1.868469] Run /bin/systemd as init process
- [ 2.160305] systemd[1]: System time before build time, advancing clock.
- [ 2.187565] systemd[1]: Failed to insert module 'autofs4': No such file or directory
- [ 2.200551] random: systemd: uninitialized urandom read (16 bytes read)
- [ 2.209019] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +)
- [ 2.227399] systemd[1]: Detected architecture arm.
- [ 2.240213] systemd[1]: Set hostname to <bananapi-m2-stretch>.
- [ 2.263201] random: systemd: uninitialized urandom read (16 bytes read)
- [ 2.279664] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read)
- [ 2.551005] systemd[1]: Created slice System Slice.
- [ 2.558234] systemd[1]: Mounting Debug File System...
- [ 2.564176] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 2.570789] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 2.578806] systemd[1]: dev-hugepages.mount: Couldn't determine result for ConditionVirtualization=!private-users, assuming failed: No such file or directory
- [ 2.593368] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 2.601789] systemd[1]: Listening on fsck to fsckd communication Socket.
- [ 2.768225] EXT4-fs (mmcblk0p1): re-mounted. Opts: errors=remount-ro
- [ 2.861182] systemd-journald[103]: Received request to flush runtime journal from PID 1
- [ 2.991978] Adding 102396k swap on /var/swap. Priority:-2 extents:2 across:102400k SS
- [ 3.703869] sun7i-dwmac 1c30000.ethernet eth0: PHY [stmmac-0:01] driver [Generic PHY] (irq=POLL)
- [ 3.730708] sun7i-dwmac 1c30000.ethernet eth0: No Safety Features support found
- [ 3.738070] sun7i-dwmac 1c30000.ethernet eth0: RX IPC Checksum Offload disabled
- [ 3.738084] sun7i-dwmac 1c30000.ethernet eth0: No MAC Management Counters available
- [ 3.753164] sun7i-dwmac 1c30000.ethernet eth0: PTP not supported by HW
- [ 3.753180] sun7i-dwmac 1c30000.ethernet eth0: configuring for phy/rgmii link mode
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement