API tools faq
paste
Advertisement
uaa

tina linux boot

uaa
Jan 28th, 2023
112
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 43.89 KB | None | 0 0
raw download clone embed print report
  1. uaa@framboise:~$ epicon -s 115200 -l /dev/ttyU0
  2.  
  3. ** Welcome to epicon Version-5.2 Copyright Isamu Yamauchi compiled:Mar 28 2021 **
  4. exec shell ~!
  5. send binary files ~f
  6. send break ~b
  7. call rz,sz,sx,rx ~rz,~sz,~sx,~rx
  8. call kermit ~sk,~rk
  9. external command ~C
  10. change speed ~c
  11. exit ~.
  12. Connected /dev/ttyU0
  13.  
  14. [24]HELLO! BOOT0 is starting!
  15. [27]BOOT0 commit : 4b419f21ba
  16. [114][pmu]: bus read error
  17. [117]set pll start
  18. [119]periph0 has been enabled
  19. [122]set pll end
  20. [123]board init ok
  21. [125]rtc[0] value = 0x80000001
  22. [128]DRAM use internal ZQ!!
  23. [131]ZQ value = 0x2f
  24. [133]chip id check OK
  25. [135]POWER SETTING ERROR!
  26. [138]DRAM BOOT DRIVE INFO: V0.16
  27. [141]DRAM CLK = 528 MHz
  28. [143]DRAM Type = 2 (2:DDR2,3:DDR3)
  29. [146]DRAMC read ODT off.
  30. [149]DRAM ODT off.
  31. [152]DRAM SIZE =64 M
  32. [154]dram_tpr4:0x0
  33. [161]DRAM simple test OK.
  34. [163]rtc standby flag is 0x0, super standby flag is 0x0
  35. [169]dram size =64
  36. [172]audio:avcc calibration
  37. [174]spinand UBOOT_START_BLK_NUM 8 UBOOT_LAST_BLK_NUM 32
  38. [180]block from 8 to 32
  39. [556]Check is correct.
  40. [558]Entry_name = optee
  41. [561]Entry_name = u-boot
  42. [569]Entry_name = dtb
  43. [573]Jump to second Boot.
  44. M/TC: OP-TEE version: 15ee1539b (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05)) #1 Tue Mar 29 06:48:41 UTC 2022 arm
  45. E/TC:0 0 platform_standby_fdt_parse:133 no pmu node
  46. E/TC:0 0 sunxi_twi_parse_from_dt:121 no pmu node
  47.  
  48.  
  49. U-Boot 2018.05-ga697d75 (Jul 28 2022 - 05:29:47 +0000) Allwinner Technology
  50.  
  51. [00.652]CPU: Allwinner Family
  52. [00.655]Model: sun8iw21
  53. I2C: [I2C-ERROR]:twi_send_clk_9pulse() 147 SDA is still Stuck Low, failed.
  54. ready
  55. [00.715]DRAM: 64 MiB
  56. [00.719]Relocation Offset is: 00ed0000
  57. [00.752]secure enable bit: 0
  58. E/TC:0 tee_read_fdt:433 fine node /firmware/optee failed with FDT_ERR_NOTFOUND
  59. [00.766]smc_tee_inform_fdt failed with: ffff0000
  60. [I2C-ERROR]:twi_stop() 339 STOP can't sendout!
  61. [00.776]pmu_axp2101_probe pmic_bus_read fail
  62. [I2C-ERROR]:twi_stop() 339 STOP can't sendout!
  63. [00.784]bmu_axp2101_probe pmic_bus_read fail
  64. [00.789]CPU=900 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=24Mhz MBus=300Mhz
  65. [00.795]gic: sec monitor mode
  66. sunxi flash map init
  67. [00.800]flash init start
  68. [00.802]workmode = 0,storage type = 0
  69. [00.809]sunxi-spinand-phy: spinand sample_mode:1 sample_delay:17
  70.  
  71. device nand0 <nand>, # parts = 4
  72. #: name size offset mask_flags
  73. 0: boot0 0x00100000 0x00000000 1
  74. 1: uboot 0x00300000 0x00100000 1
  75. 2: secure_storage 0x00100000 0x00400000 1
  76. 3: sys 0x07b00000 0x00500000 0
  77.  
  78. active partition: nand0,0 - (boot0) 0x00100000 @ 0x00000000
  79.  
  80. defaults:
  81. mtdids : nand0=nand
  82. mtdparts: mtdparts=nand:1024k@0(boot0)ro,3072k@1048576(uboot)ro,1024k@4194304(secure_storage)ro,-(sys)
  83. [00.924]ubi0: attaching mtd4
  84. [01.149]ubi0: scanning is finished
  85. [01.159]ubi0: attached mtd4 (name "sys", size 123 MiB)
  86. [01.163]ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 258048 bytes
  87. [01.169]ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 2048
  88. [01.176]ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  89. [01.182]ubi0: good PEBs: 492, bad PEBs: 0, corrupted PEBs: 0
  90. [01.187]ubi0: user volume: 7, internal volumes: 1, max. volumes count: 128
  91. [01.194]ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0
  92. [01.202]ubi0: available PEBs: 0, total reserved PEBs: 492, PEBs reserved for bad PEB handling: 20
  93. [01.210]sunxi flash init ok
  94. [01.213]line:724 init_clocks
  95. [01.216]drv_disp_init
  96. request pwm success, pwm6:pwm6:0x2000c00.
  97. [01.230]drv_disp_init finish
  98. [01.394]Loading Environment from SUNXI_FLASH... OK
  99. [01.431]boot_gui_init:start
  100. [01.434]set disp.dev2_output_type fail. using defval=0
  101. [01.439]LCD open finish
  102. [01.442]boot_gui_init:finish
  103. partno erro : can't find partition bootloader
  104. partno erro : can't find partition boot-resource
  105. [01.499]Get bootloader and boot-resource partition number fail!
  106. [01.505]Item0 (Map) magic is bad
  107. [01.508]out of usb burn from boot: not need burn key
  108. [01.536]update bootcmd
  109. [01.561]change working_fdt 0x41e8fe70 to 0x41e6fe70
  110. [01.573]## error: update_fdt_dram_para : FDT_ERR_NOTFOUND
  111. [01.582]update dts
  112. Hit any key to stop autoboot: 0
  113. input addr exceed dram scope
  114. [03.055]no vendor_boot partition is found
  115. Android's image name: v851s-perf1
  116. [03.120]Starting kernel ...
  117.  
  118. [ 0.000000] Booting Linux on physical CPU 0x0
  119. [ 0.000000] Linux version 4.9.191 (book@100ask) (gcc version 6.4.1 (OpenWrt/Linaro GCC 6.4-2017.11 2017-11) ) #14 PREEMPT Tue Nov 22 07:56:10 UTC 2022
  120. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  121. [ 0.000000] CPU: div instructions available: patching division code
  122. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  123. [ 0.000000] OF: fdt:Machine model: sun8iw21
  124. [ 0.000000] disp reserve base 0x41f13000 ,size 0x177000
  125. [ 0.000000] Memory policy: Data cache writeback
  126. [ 0.000000] On node 0 totalpages: 16384
  127. [ 0.000000] free_area_init_node: node 0, pgdat c0a508f0, node_mem_map c3f78000
  128. [ 0.000000] Normal zone: 128 pages used for memmap
  129. [ 0.000000] Normal zone: 0 pages reserved
  130. [ 0.000000] Normal zone: 16384 pages, LIFO batch:3
  131. [ 0.000000] psci: probing for conduit method from DT.
  132. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  133. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  134. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  135. [ 0.000000] psci: SMC Calling Convention v1.0
  136. [ 0.000000] CPU: All CPU(s) started in SVC mode.
  137. [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
  138. [ 0.000000] pcpu-alloc: [0] 0
  139. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256
  140. [ 0.000000] Kernel command line: ubi.mtd=sys ubi.block=0,rootfs earlyprintk=sunxi-uart,0x02500000 clk_ignore_unused initcall_debug=0 console=ttyS0,115200 loglevel=8 root=/dev/ubiblock0_4 rootfstype=squashfs init=/pseudo_init partitions=mbr@ubi0_0:boot-res@ubi0_1:env@ubi0_2:boot@ubi0_3:rootfs@ubi0_4:rootfs_data@ubi0_5:UDISK@ubi0_6: cma= snum= mac_addr= wifi_mac= bt_mac= specialstr= gpt=1 androidboot.hardware=sun8iw21p1 boot_type=5 androidboot.boot_type=5 gpt=1 uboot_message=2018.05-ga697d75(07/28/2022-05:29:47) mbr_offset=1032192 disp_reserve=1536000,0x41f13000 bootreason=button aw-ubi-spinand.ubootblks=24 androidboot.dramsize=64
  141. [ 0.000000] PID hash table entries: 256 (order: -2, 1024 bytes)
  142. [ 0.000000] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
  143. [ 0.000000] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
  144. [ 0.000000] Memory: 53196K/65536K available (6144K kernel code, 326K rwdata, 1440K rodata, 1024K init, 171K bss, 12340K reserved, 0K cma-reserved, 0K highmem)
  145. [ 0.000000] Virtual kernel memory layout:
  146. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  147. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  148. [ 0.000000] vmalloc : 0xc4800000 - 0xff800000 ( 944 MB)
  149. [ 0.000000] lowmem : 0xc0000000 - 0xc4000000 ( 64 MB)
  150. [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  151. [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  152. [ 0.000000] .text : 0xc0008000 - 0xc0700000 (7136 kB)
  153. [ 0.000000] .init : 0xc0900000 - 0xc0a00000 (1024 kB)
  154. [ 0.000000] .data : 0xc0a00000 - 0xc0a51930 ( 327 kB)
  155. [ 0.000000] .bss : 0xc0a51930 - 0xc0a7c83c ( 172 kB)
  156. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  157. [ 0.000000] Preemptible hierarchical RCU implementation.
  158. [ 0.000000] Build-time adjustment of leaf fanout to 32.
  159. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  160. [ 0.000000] sunxi_parse_sdm_info failed: -1
  161. [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
  162. [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 24.00MHz (phys).
  163. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  164. [ 0.000008] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  165. [ 0.000022] Switching to timer-based delay loop, resolution 41ns
  166. [ 0.000206] Console: colour dummy device 80x30
  167. [ 0.000238] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  168. [ 0.000255] pid_max: default: 32768 minimum: 301
  169. [ 0.000458] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  170. [ 0.000471] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  171. [ 0.001069] CPU: Testing write buffer coherency: ok
  172. [ 0.001700] Setting up static identity map for 0x40100000 - 0x40100058
  173. [ 0.003450] devtmpfs: initialized
  174. [ 0.037794] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  175. [ 0.038393] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  176. [ 0.038422] futex hash table entries: 256 (order: -1, 3072 bytes)
  177. [ 0.038575] atomic64_test: passed
  178. [ 0.038589] pinctrl core: initialized pinctrl subsystem
  179. [ 0.039875] NET: Registered protocol family 16
  180. [ 0.040735] DMA: preallocated 256 KiB pool for atomic coherent allocations
  181. [ 0.042160] dump_class_init,857, success
  182. [ 0.069525] cpuidle: using governor menu
  183. [ 0.070901] platform 2010000.iommu: iova_base: 0x48400000
  184. [ 0.071504] sunxi iommu: irq = 22
  185. [ 0.092834] sun8iw21p1-pinctrl pio: initialized sunXi PIO driver
  186. [ 0.095989] iommu: Adding device npu to group 0
  187. [ 0.098120] iommu: Adding device 1c0e000.ve to group 0
  188. [ 0.111571] iommu: Adding device 5410000.g2d to group 0
  189. [ 0.112505] iommu: Adding device 5000000.disp to group 0
  190. [ 0.124198] iommu: Adding device 5908000.tdm to group 0
  191. [ 0.125208] iommu: Adding device 5900000.isp to group 0
  192. [ 0.126106] iommu: Adding device 58ffffc.isp to group 0
  193. [ 0.127018] iommu: Adding device 58ffff8.isp to group 0
  194. [ 0.127978] iommu: Adding device 58ffff4.isp to group 0
  195. [ 0.128493] iommu: Adding device 5800800.vind:isp@4 to group 0
  196. [ 0.129398] iommu: Adding device 5910000.scaler to group 0
  197. [ 0.130226] iommu: Adding device 590fffc.scaler to group 0
  198. [ 0.130957] iommu: Adding device 590fff8.scaler to group 0
  199. [ 0.131451] iommu: Adding device 590fff4.scaler to group 0
  200. [ 0.132400] iommu: Adding device 5910400.scaler to group 0
  201. [ 0.132887] iommu: Adding device 59103fc.scaler to group 0
  202. [ 0.133589] iommu: Adding device 59103f8.scaler to group 0
  203. [ 0.134068] iommu: Adding device 59103f4.scaler to group 0
  204. [ 0.134933] iommu: Adding device 5910800.scaler to group 0
  205. [ 0.135597] iommu: Adding device 59107fc.scaler to group 0
  206. [ 0.136297] iommu: Adding device 59107f8.scaler to group 0
  207. [ 0.136774] iommu: Adding device 59107f4.scaler to group 0
  208. [ 0.137674] iommu: Adding device 5910c00.scaler to group 0
  209. [ 0.138167] iommu: Adding device 5910bfc.scaler to group 0
  210. [ 0.138629] iommu: Adding device 5910bf8.scaler to group 0
  211. [ 0.139302] iommu: Adding device 5910bf4.scaler to group 0
  212. [ 0.141013] iommu: Adding device vinc0 to group 0
  213. [ 0.141931] iommu: Adding device vinc4 to group 0
  214. [ 0.142713] iommu: Adding device vinc8 to group 0
  215. [ 0.143670] iommu: Adding device vinc12 to group 0
  216. [ 0.193175] pwm module init!
  217. [ 0.197752] sunxi-pm debug v3.10
  218. [ 0.198816] SCSI subsystem initialized
  219. [ 0.199217] usbcore: registered new interface driver usbfs
  220. [ 0.199310] usbcore: registered new interface driver hub
  221. [ 0.203275] usbcore: registered new device driver usb
  222. [ 0.203654] sunxi_i2c_adap_init()2748 - init
  223. [ 0.204195] sunxi_i2c_probe()2443 - [i2c1] twi_drv_used = 0
  224. [ 0.204213] sunxi_i2c_probe()2450 - [i2c1] twi_pkt_interval = 0
  225. [ 0.204284] twi_regulator_request()647 - [i2c1] regulator not found(isn't configured in dts)!
  226. [ 0.204294] twi_request_gpio()463 - [i2c1] init name: (null)
  227. [ 0.205386] media: Linux media interface: v0.10
  228. [ 0.205568] Linux video capture interface: v2.00
  229. [ 0.208643] ion_parse_dt_heap_common: id 0 type 0 name sys_user align 1000
  230. [ 0.209071] ion_parse_dt_heap_common: id 4 type 4 name cma align 1000
  231. [ 0.210319] Advanced Linux Sound Architecture Driver Initialized.
  232. [ 0.211394] Bluetooth: Core ver 2.22
  233. [ 0.211584] NET: Registered protocol family 31
  234. [ 0.211596] Bluetooth: HCI device and connection manager initialized
  235. [ 0.211622] Bluetooth: HCI socket layer initialized
  236. [ 0.211636] Bluetooth: L2CAP socket layer initialized
  237. [ 0.211687] Bluetooth: SCO socket layer initialized
  238. [ 0.215252] G2D: rcq version initialized.major:251
  239. [ 0.216584] clocksource: Switched to clocksource arch_sys_counter
  240. [ 0.250320] get androidboot.mode fail
  241. [ 0.252695] NET: Registered protocol family 2
  242. [ 0.266984] TCP established hash table entries: 16 (order: -6, 64 bytes)
  243. [ 0.267006] TCP bind hash table entries: 16 (order: -6, 64 bytes)
  244. [ 0.267017] TCP: Hash tables configured (established 16 bind 16)
  245. [ 0.267101] UDP hash table entries: 256 (order: 0, 4096 bytes)
  246. [ 0.267121] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  247. [ 0.267354] NET: Registered protocol family 1
  248. [ 0.267693] sun8iw21p1-pinctrl pio: can not get func[mux=7] on pin PC0
  249. [ 0.267713] sun8iw21p1-pinctrl pio: can not get func[mux=7] on pin PC1
  250. [ 0.267728] sun8iw21p1-pinctrl pio: can not get func[mux=7] on pin PC2
  251. [ 0.267743] sun8iw21p1-pinctrl pio: can not get func[mux=7] on pin PC3
  252. [ 0.267758] sun8iw21p1-pinctrl pio: can not get func[mux=7] on pin PC4
  253. [ 0.267772] sun8iw21p1-pinctrl pio: can not get func[mux=7] on pin PC5
  254. [ 0.268063] sunxi_spi_probe()2250 - [spi0] SPI DBI INTERFACE
  255. [ 0.268077] sunxi_spi_probe()2259 - [spi0] SPI MASTER MODE
  256. [ 0.268162] sunxi_spi_resource_get()1917 - sample_mode:1 sample_delay:17
  257. [ 0.268187] spi0 supply spi not found, using dummy regulator
  258. [ 0.268298] sunxi_spi_request_gpio()1883 - [spi0] Pinctrl init spi0
  259. [ 0.268397] sunxi_spi_clk_init()1954 - [spi0] mclk 100000000
  260. [ 0.269535] sunxi_spi_probe()2339 - [spi0]: driver probe succeed, base c4868000, irq 294
  261. [ 0.274125] sunxi_sid_driver_init+0x0/0x10 complete comp.
  262. [ 0.275433] workingset: timestamp_bits=29 max_order=14 bucket_order=0
  263. [ 0.293673] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  264. [ 0.294258] jffs2: version 2.2. (NAND) (SUMMARY) 2001-2006 Red Hat, Inc.
  265. [ 0.297363] io scheduler noop registered
  266. [ 0.297382] io scheduler deadline registered
  267. [ 0.297698] io scheduler cfq registered (default)
  268. [ 0.299008] [DISP]disp_module_init
  269. [ 0.300690] [DISP] disp_init,line:2340:
  270. [ 0.300706] smooth display screen:0 type:1 mode:4
  271. [ 0.334918] lcd 0, driver_name d310t9362v1, panel_name default_lcd
  272. [ 0.334939] lcd 0, driver_name d310t9362v1, panel_name super_lcd_driver
  273. [ 0.335111] display_fb_request,fb_id:0
  274. [ 0.342209] [DISP] de_fcm_set_para,line:491:
  275. [ 0.342227] fcm lut 0 not find, auto retry after init
  276. [ 0.343636] [DISP]disp_module_init finish
  277. [ 0.346436] uart0 supply uart not found, using dummy regulator
  278. [ 0.346936] [DISP] de_fcm_set_para,line:491:
  279. [ 0.346950] fcm lut 0 not find, auto retry after init
  280. [ 0.346977] [DISP] de_fcm_set_para,line:491:
  281. [ 0.346983] fcm lut 0 not find, auto retry after init
  282. [ 0.347061] [DISP] lcd_clk_config,line:699:
  283. [ 0.347075] disp 0, clk: pll(204000000),clk(204000000),dclk(34000000) dsi_rate(34000000)
  284. [ 0.347075] clk real:pll(288000000),clk(288000000),dclk(72000000) dsi_rate(150000000)
  285. [ 0.348037] uart0: ttyS0 at MMIO 0x2500000 (irq = 289, base_baud = 1500000) is a SUNXI
  286. [ 0.348079] sw_console_setup()2050 - console setup baud 115200 parity n bits 8, flow n
  287. [ 1.474438] console [ttyS0] enabled
  288. [ 1.479426] misc dump reg init
  289. [ 1.483621] npu[1][1] vipcore, platform driver device=0xc3a18010
  290. [ 1.490754] npu[1][1] vipcore irq number is 290.
  291. [ 1.495944] gckvip_drv_adjust_param 232 SUCCESS
  292. [ 1.501175] the freq of pll_npux4 clk is fixed
  293. [ 1.506175] Want set pclk rate(348000000) support(1392000000) real(1392000000)
  294. [ 1.514418] Want set mclk rate(348000000) support(348000000) real(348000000)
  295. [ 1.522431] npu[1][1] This device support 64bits DMA
  296. [ 1.528635] npu[1][1] core_0, request irqline=290, name=vipcore_0
  297. [ 1.535579] npu[1][1] =======vipcore parameter=====
  298. [ 1.541303] npu[1][1] registerMemBase 0x03050000,
  299. [ 1.547148] npu[1][1] registerMemSize 0x00020000,
  300. [ 1.552919] npu[1][1] irqLine 0x00000122,
  301. [ 1.558723] npu[1][1] contiguousSize 0x00100000
  302. [ 1.564297] npu[1][1] contiguousBase 0x30000000
  303. [ 1.569955] npu[1][1] vipContiguousBase 0x0
  304. [ 1.574844] npu[1][1] drvType 0x00000000
  305. [ 1.580451] npu[1][1] AXISramSize 0x00000000
  306. [ 1.586023] npu[1][1] AXISramBaseAddress 0x00000000
  307. [ 1.591621] npu[1][1] VIPSramSize 0x00020000
  308. [ 1.597208] npu[1][1] VIPSramBaseAddress 0x00400000
  309. [ 1.602780] npu[1][1] sysHeapSize 0x00200000
  310. [ 1.608364] npu[1][1] ===============================
  311. [ 1.614106] npu[1][1] VIPLite driver version 1.8.1.0-AW-2022-07-26
  312. [ 1.622301] sunxi-wlan soc@03000000:wlan@0: wlan_busnum (1)
  313. [ 1.628847] sunxi-wlan soc@03000000:wlan@0: wlan_power_num (-1)
  314. [ 1.635501] sunxi-wlan soc@03000000:wlan@0: Missing wlan_io_regulator.
  315. [ 1.642896] sunxi-wlan soc@03000000:wlan@0: io_regulator_name ((null))
  316. [ 1.650283] sunxi-wlan soc@03000000:wlan@0: request pincrtl handle for device [soc@03000000:wlan@0] failed
  317. [ 1.661280] sunxi-wlan soc@03000000:wlan@0: wlan_regon gpio=134 mul-sel=1 pull=1 drv_level=2 data=0
  318. [ 1.671920] sunxi-wlan soc@03000000:wlan@0: get gpio chip_en failed
  319. [ 1.679024] sunxi-wlan soc@03000000:wlan@0: wlan_hostwake gpio=135 mul-sel=14 pull=1 drv_level=2 data=0
  320. [ 1.690131] sunxi-wlan soc@03000000:wlan@0: clk_name ()
  321. [ 1.698284] sunxi-spinand: AW SPINand MTD Layer Version: 2.4 20220106
  322. [ 1.705534] sunxi-spinand-phy: AW SPINand Phy Layer Version: 1.11 20211125
  323. [ 1.713932] sunxi-spinand-phy: detect munufacture from id table: Foresee
  324. [ 1.721538] sunxi-spinand-phy: detect spinand id: ff7171cd ffffffff
  325. [ 1.728611] sunxi-spinand-phy: ========== arch info ==========
  326. [ 1.735162] sunxi-spinand-phy: Model: FS35SQA001G
  327. [ 1.741929] sunxi-spinand-phy: Munufacture: Foresee
  328. [ 1.748225] sunxi-spinand-phy: DieCntPerChip: 1
  329. [ 1.753892] sunxi-spinand-phy: BlkCntPerDie: 1024
  330. [ 1.759883] sunxi-spinand-phy: PageCntPerBlk: 64
  331. [ 1.765651] sunxi-spinand-phy: SectCntPerPage: 4
  332. [ 1.771334] sunxi-spinand-phy: OobSizePerPage: 64
  333. [ 1.777109] sunxi-spinand-phy: BadBlockFlag: 0x0
  334. [ 1.782974] sunxi-spinand-phy: OperationOpt: 0x7
  335. [ 1.788850] sunxi-spinand-phy: MaxEraseTimes: 50000
  336. [ 1.794905] sunxi-spinand-phy: EccFlag: 0x0
  337. [ 1.800778] sunxi-spinand-phy: EccType: 2
  338. [ 1.806445] sunxi-spinand-phy: EccProtectedType: 1
  339. [ 1.812120] sunxi-spinand-phy: ========================================
  340. [ 1.819553] sunxi-spinand-phy:
  341. [ 1.823075] sunxi-spinand-phy: ========== physical info ==========
  342. [ 1.830023] sunxi-spinand-phy: TotalSize: 128 M
  343. [ 1.835396] sunxi-spinand-phy: SectorSize: 512 B
  344. [ 1.840781] sunxi-spinand-phy: PageSize: 2 K
  345. [ 1.845963] sunxi-spinand-phy: BlockSize: 128 K
  346. [ 1.851349] sunxi-spinand-phy: OOBSize: 64 B
  347. [ 1.856636] sunxi-spinand-phy: ========================================
  348. [ 1.864057] sunxi-spinand-phy:
  349. [ 1.867587] sunxi-spinand-phy: ========== logical info ==========
  350. [ 1.874427] sunxi-spinand-phy: TotalSize: 128 M
  351. [ 1.879812] sunxi-spinand-phy: SectorSize: 512 B
  352. [ 1.885188] sunxi-spinand-phy: PageSize: 4 K
  353. [ 1.890379] sunxi-spinand-phy: BlockSize: 256 K
  354. [ 1.895754] sunxi-spinand-phy: OOBSize: 128 B
  355. [ 1.901131] sunxi-spinand-phy: ========================================
  356. [ 1.908659] sunxi-spinand-phy: block lock register: 0x00
  357. [ 1.914733] sunxi-spinand-phy: feature register: 0x11
  358. [ 1.920428] sunxi-spinand-phy: sunxi physic nand init end
  359. [ 1.926983] Creating 4 MTD partitions on "sunxi_mtd_nand":
  360. [ 1.933158] 0x000000000000-0x000000100000 : "boot0"
  361. [ 1.941513] 0x000000100000-0x000000400000 : "uboot"
  362. [ 1.951327] 0x000000400000-0x000000500000 : "secure_storage"
  363. [ 1.960940] 0x000000500000-0x000008000000 : "sys"
  364. [ 1.968047] random: fast init done
  365. [ 2.120394] libphy: Fixed MDIO Bus: probed
  366. [ 2.126016] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  367. [ 2.133886] get ehci0-controller, regulator_io is no nocare
  368. [ 2.140241] get ehci0-controller wakeup-source is fail.
  369. [ 2.146308] sunxi ehci0-controller don't init wakeup source
  370. [ 2.152760] [sunxi-ehci0]: probe, pdev->name: 4101000.ehci0-controller, sunxi_ehci: 0xc0a70ff8, 0x:c4877000, irq_no:130
  371. [ 2.164923] [sunxi-ehci0]: Not init ehci0
  372. [ 2.169941] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  373. [ 2.177512] get ohci0-controller, regulator_io is no nocare
  374. [ 2.183776] get ohci0-controller wakeup-source is fail.
  375. [ 2.189917] sunxi ohci0-controller don't init wakeup source
  376. [ 2.196267] [sunxi-ohci0]: probe, pdev->name: 4101000.ohci0-controller, sunxi_ohci: 0xc0a7121c
  377. [ 2.206021] [sunxi-ohci0]: Not init ohci0
  378. [ 2.211277] usbcore: registered new interface driver uas
  379. [ 2.217775] usbcore: registered new interface driver usb-storage
  380. [ 2.224844] usbcore: registered new interface driver ums-alauda
  381. [ 2.231789] usbcore: registered new interface driver ums-cypress
  382. [ 2.238882] usbcore: registered new interface driver ums-datafab
  383. [ 2.245936] usbcore: registered new interface driver ums_eneub6250
  384. [ 2.253228] usbcore: registered new interface driver ums-freecom
  385. [ 2.260395] usbcore: registered new interface driver ums-isd200
  386. [ 2.267397] usbcore: registered new interface driver ums-jumpshot
  387. [ 2.274524] usbcore: registered new interface driver ums-karma
  388. [ 2.281350] usbcore: registered new interface driver ums-onetouch
  389. [ 2.288569] usbcore: registered new interface driver ums-realtek
  390. [ 2.295627] usbcore: registered new interface driver ums-sddr09
  391. [ 2.302618] usbcore: registered new interface driver ums-sddr55
  392. [ 2.309704] usbcore: registered new interface driver ums-usbat
  393. [ 2.316378] usb_serial_number:20080411
  394. [ 2.321715] sunxi_gpadc_init,1949, success
  395. [ 2.327156] sunxi_gpadc_setup: get channel scan data failed
  396. [ 2.334689] input: sunxi-gpadc0 as /devices/virtual/input/input0
  397. [ 2.344111] sunxi-rtc rtc: rtc core: registered sunxi-rtc as rtc0
  398. [ 2.351417] sunxi-rtc rtc: RTC enabled
  399. [ 2.355715] fix to hot reboot, save boot reason
  400. [ 2.361403] i2c /dev entries driver
  401. [ 2.366286] IR NEC protocol handler initialized
  402. [ 2.371793] IR RC5(x/sz) protocol handler initialized
  403. [ 2.377577] IR RC6 protocol handler initialized
  404. [ 2.382673] IR JVC protocol handler initialized
  405. [ 2.387806] IR Sony protocol handler initialized
  406. [ 2.393002] IR SANYO protocol handler initialized
  407. [ 2.398364] IR Sharp protocol handler initialized
  408. [ 2.403655] IR MCE Keyboard/mouse protocol handler initialized
  409. [ 2.410246] [DISP] fb_free_reserve_mem,line:2487:
  410. [ 2.410247] [DISP] fb_free_reserve_mem wait for sync timeout
  411. [ 2.410588] Freeing logo buffer memory: 1500K
  412. [ 2.427210] IR XMP protocol handler initialized
  413. [ 2.432299] sunxi cedar version 0.1
  414. [ 2.436377] VE: install start!!!
  415. [ 2.436377]
  416. [ 2.441870] VE: cedar-ve the get irq is 291
  417. [ 2.446719] VE: regs_csi = c48b1000
  418. [ 2.451438] VE: ve_proc_mgr: flag = 1
  419. [ 2.451438]
  420. [ 2.457479] VE: install end!!!
  421. [ 2.457479]
  422. [ 2.463054] google_vp9: sunxi google vp9 version 0.1
  423. [ 2.472217] sunxi-wdt 20500a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  424. [ 2.481974] Bluetooth: HCI UART driver ver 2.2.d448471.20181218-163903
  425. [ 2.489629] Bluetooth: HCI UART protocol H4 registered
  426. [ 2.495413] Bluetooth: HCI H4 protocol initialized
  427. [ 2.501170] Bluetooth: XRadio Bluetooth LPM Mode Driver Ver 01.00.07
  428. [ 2.509067] bt_fdi debugfs_init
  429. [ 2.517394] cpuidle: enable-method property 'psci' found operations
  430. [ 2.527489] sunxi-mmc sdc0: SD/MMC/SDIO Host Controller Driver(v3.59 2022-4-21 13:40)
  431. [ 2.536479] sunxi-mmc sdc0: ***ctl-spec-caps*** 8
  432. [ 2.542300] sunxi-mmc sdc0: No vmmc regulator found
  433. [ 2.547880] sunxi-mmc sdc0: No vqmmc regulator found
  434. [ 2.553464] sunxi-mmc sdc0: No vdmmc regulator found
  435. [ 2.559090] sunxi-mmc sdc0: No vd33sw regulator found
  436. [ 2.564771] sunxi-mmc sdc0: No vd18sw regulator found
  437. [ 2.570535] sunxi-mmc sdc0: No vq33sw regulator found
  438. [ 2.576216] sunxi-mmc sdc0: No vq18sw regulator found
  439. [ 2.582530] sunxi-mmc sdc0: set host busy
  440. [ 2.587251] sunxi-mmc sdc0: Got CD GPIO
  441. [ 2.592133] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  442. [ 2.602665] sunxi-mmc sdc0: no vqmmc,Check if there is regulator
  443. [ 2.636624] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  444. [ 2.676843] sunxi-mmc sdc0: detmode:gpio irq
  445. [ 2.676878] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  446. [ 2.683861] sunxi-mmc sdc0: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  447. [ 2.695748] sunxi-mmc sdc0: smc 0 p0 err, cmd 8, RTO !!
  448. [ 2.706555] sunxi-mmc sdc0: smc 0 p0 err, cmd 55, RTO !!
  449. [ 2.712480] sunxi-mmc sdc0: smc 0 p0 err, cmd 55, RTO !!
  450. [ 2.718481] sunxi-mmc sdc0: smc 0 p0 err, cmd 55, RTO !!
  451. [ 2.724527] sunxi-mmc sdc0: smc 0 p0 err, cmd 55, RTO !!
  452. [ 2.724556] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  453. [ 2.725648] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  454. [ 2.725726] sunxi-mmc sdc0: no vqmmc,Check if there is regulator
  455. [ 2.748010] sunxi-mmc sdc0: sdc set ios:clk 300000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  456. [ 2.776390] sun8iw21p1-pinctrl pio: expect_func as:io_disabled, but muxsel(7) is func:uart3
  457. [ 2.785864] sunxi-mmc sdc0: sdc set ios:clk 300000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  458. [ 2.798847] sunxi-mmc sdc0: sdc set ios:clk 300000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  459. [ 2.810725] sunxi-mmc sdc0: smc 0 p0 err, cmd 8, RTO !!
  460. [ 2.816642] sunxi-mmc sdc0: smc 0 p0 err, cmd 55, RTO !!
  461. [ 2.822697] sunxi-mmc sdc0: smc 0 p0 err, cmd 55, RTO !!
  462. [ 2.828715] sunxi-mmc sdc0: smc 0 p0 err, cmd 55, RTO !!
  463. [ 2.834707] sunxi-mmc sdc0: smc 0 p0 err, cmd 55, RTO !!
  464. [ 2.834733] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  465. [ 2.835826] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  466. [ 2.835909] sunxi-mmc sdc0: no vqmmc,Check if there is regulator
  467. [ 2.862464] sunxi-mmc sdc0: sdc set ios:clk 200000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  468. [ 2.880195] sun8iw21p1-pinctrl pio: expect_func as:io_disabled, but muxsel(7) is func:uart3
  469. [ 2.889605] sunxi-mmc sdc0: sdc set ios:clk 200000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  470. [ 2.902526] sunxi-mmc sdc0: sdc set ios:clk 200000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  471. [ 2.914394] sunxi-mmc sdc0: smc 0 p0 err, cmd 8, RTO !!
  472. [ 2.920310] sunxi-mmc sdc0: smc 0 p0 err, cmd 55, RTO !!
  473. [ 2.926349] sunxi-mmc sdc0: smc 0 p0 err, cmd 55, RTO !!
  474. [ 2.932356] sunxi-mmc sdc0: smc 0 p0 err, cmd 55, RTO !!
  475. [ 2.938359] sunxi-mmc sdc0: smc 0 p0 err, cmd 55, RTO !!
  476. [ 2.938387] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  477. [ 2.939476] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  478. [ 2.939577] sunxi-mmc sdc0: no vqmmc,Check if there is regulator
  479. [ 2.972897] sunxi-mmc sdc0: sdc set ios:clk 100000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  480. [ 2.983869] sun8iw21p1-pinctrl pio: expect_func as:io_disabled, but muxsel(7) is func:uart3
  481. [ 2.993293] sun8iw21p1-pinctrl pio: expect_func as:io_disabled, but muxsel(7) is func:uart3
  482. [ 3.002712] sunxi-mmc sdc0: sdc set ios:clk 100000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  483. [ 3.015663] sunxi-mmc sdc0: sdc set ios:clk 100000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  484. [ 3.027586] sunxi-mmc sdc0: smc 0 p0 err, cmd 8, RTO !!
  485. [ 3.033486] sunxi-mmc sdc0: smc 0 p0 err, cmd 55, RTO !!
  486. [ 3.039488] sunxi-mmc sdc0: smc 0 p0 err, cmd 55, RTO !!
  487. [ 3.045478] sunxi-mmc sdc0: smc 0 p0 err, cmd 55, RTO !!
  488. [ 3.051478] sunxi-mmc sdc0: smc 0 p0 err, cmd 55, RTO !!
  489. [ 3.051505] sunxi-mmc sdc0: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  490. [ 3.068948] sun8iw21p1-pinctrl pio: expect_func as:io_disabled, but muxsel(7) is func:uart3
  491. [ 3.078370] sun8iw21p1-pinctrl pio: expect_func as:io_disabled, but muxsel(7) is func:uart3
  492. [ 3.088042] sunxi-mmc sdc1: SD/MMC/SDIO Host Controller Driver(v3.59 2022-4-21 13:40)
  493. [ 3.097086] sunxi-mmc sdc1: ***ctl-spec-caps*** 8
  494. [ 3.102439] sunxi-mmc sdc1: No vmmc regulator found
  495. [ 3.107967] sunxi-mmc sdc1: No vqmmc regulator found
  496. [ 3.113550] sunxi-mmc sdc1: No vdmmc regulator found
  497. [ 3.119234] sunxi-mmc sdc1: No vd33sw regulator found
  498. [ 3.124918] sunxi-mmc sdc1: No vd18sw regulator found
  499. [ 3.130622] sunxi-mmc sdc1: No vq33sw regulator found
  500. [ 3.136304] sunxi-mmc sdc1: No vq18sw regulator found
  501. [ 3.142534] sunxi-mmc sdc1: set host busy
  502. [ 3.147174] mmc:failed to get gpios
  503. [ 3.151517] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  504. [ 3.162023] sunxi-mmc sdc1: no vqmmc,Check if there is regulator
  505. [ 3.196623] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  506. [ 3.236620] sunxi-mmc sdc1: detmode:manually by software
  507. [ 3.242632] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !!
  508. [ 3.248653] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !!
  509. [ 3.248683] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  510. [ 3.256775] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  511. [ 3.268625] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !!
  512. [ 3.279470] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !!
  513. [ 3.285365] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !!
  514. [ 3.291269] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !!
  515. [ 3.291297] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  516. [ 3.292386] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  517. [ 3.292461] sunxi-mmc sdc1: no vqmmc,Check if there is regulator
  518. [ 3.324808] sunxi-mmc sdc1: sdc set ios:clk 300000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  519. [ 3.344141] usbcore: registered new interface driver usbhid
  520. [ 3.350818] usbhid: USB HID core driver
  521. [ 3.355151] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !!
  522. [ 3.361204] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !!
  523. [ 3.361250] sunxi-mmc sdc1: sdc set ios:clk 300000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  524. [ 3.369488] sunxi-mmc sdc1: sdc set ios:clk 300000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  525. [ 3.381431] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !!
  526. [ 3.392347] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !!
  527. [ 3.398279] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !!
  528. [ 3.404183] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !!
  529. [ 3.404208] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  530. [ 3.405301] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  531. [ 3.405385] sunxi-mmc sdc1: no vqmmc,Check if there is regulator
  532. [ 3.427522] sunxi-mmc sdc1: sdc set ios:clk 200000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  533. [ 3.458297] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !!
  534. [ 3.465920] [sound 1158][DAUDIO snd_sunxi_regulator_init] regulator missing or invalid
  535. [ 3.474899] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !!
  536. [ 3.475006] sunxi-mmc sdc1: sdc set ios:clk 200000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  537. [ 3.483499] sunxi-mmc sdc1: sdc set ios:clk 200000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  538. [ 3.495451] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !!
  539. [ 3.506402] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !!
  540. [ 3.512337] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !!
  541. [ 3.518265] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !!
  542. [ 3.518323] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  543. [ 3.519427] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  544. [ 3.519528] sunxi-mmc sdc1: no vqmmc,Check if there is regulator
  545. [ 3.551958] sunxi-mmc sdc1: sdc set ios:clk 100000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  546. [ 3.571536] sunxi-snd-mach soc@03000000:codec_mach: sunxi-snd-codec <-> soc@03000000:codec_plat mapping ok
  547. [ 3.585742] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !!
  548. [ 3.592301] sunxi-snd-mach soc@03000000:daudio0_mach: snd-soc-dummy-dai <-> 2032000.daudio0_plat mapping ok
  549. [ 3.603303] sunxi-mmc sdc1: smc 1 p1 err, cmd 52, RTO !!
  550. [ 3.603364] sunxi-mmc sdc1: sdc set ios:clk 100000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  551. [ 3.611681] sunxi-mmc sdc1: sdc set ios:clk 100000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  552. [ 3.623639] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !!
  553. [ 3.634610] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !!
  554. [ 3.640559] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !!
  555. [ 3.646467] sunxi-mmc sdc1: smc 1 p1 err, cmd 5, RTO !!
  556. [ 3.646492] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm OFF vdd 0 width 1 timing LEGACY(SDR12) dt B
  557. [ 3.671759] Netfilter messages via NETLINK v0.30.
  558. [ 3.677889] nf_conntrack version 0.5.0 (1024 buckets, 4096 max)
  559. [ 3.684773] ctnetlink v0.93: registering with nfnetlink.
  560. [ 3.691450] ip_tables: (C) 2000-2006 Netfilter Core Team
  561. [ 3.698942] NET: Registered protocol family 10
  562. [ 3.705908] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  563. [ 3.714232] NET: Registered protocol family 17
  564. [ 3.719782] NET: Registered protocol family 15
  565. [ 3.724927] Bluetooth: RFCOMM TTY layer initialized
  566. [ 3.730611] Bluetooth: RFCOMM socket layer initialized
  567. [ 3.736419] Bluetooth: RFCOMM ver 1.11
  568. [ 3.742119] Registering SWP/SWPB emulation handler
  569. [ 3.757573] ubi0: attaching mtd3
  570. [ 3.848335] random: crng init done
  571. [ 3.991340] ubi0: scanning is finished
  572. [ 4.006440] ubi0: attached mtd3 (name "sys", size 123 MiB)
  573. [ 4.012732] ubi0: PEB size: 262144 bytes (256 KiB), LEB size: 258048 bytes
  574. [ 4.020600] ubi0: min./max. I/O unit sizes: 4096/4096, sub-page size 2048
  575. [ 4.028388] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
  576. [ 4.036219] ubi0: good PEBs: 492, bad PEBs: 0, corrupted PEBs: 0
  577. [ 4.043017] ubi0: user volume: 7, internal volumes: 1, max. volumes count: 128
  578. [ 4.051170] ubi0: max/mean erase counter: 2/1, WL threshold: 4096, image sequence number: 0
  579. [ 4.060569] ubi0: available PEBs: 10, total reserved PEBs: 482, PEBs reserved for bad PEB handling: 10
  580. [ 4.071102] ubi0: background thread "ubi_bgt0d" started, PID 722
  581. [ 4.079562] block ubiblock0_4: created from ubi0:4(rootfs)
  582. [ 4.080099] get det_vbus is fail, 84
  583. [ 4.080104] get id is fail, 84
  584. [ 4.081246] sunxi-rtc rtc: setting system clock to 1970-01-01 00:00:48 UTC (48)
  585. [ 4.082191] clk: Not disabling unused clocks
  586. [ 4.082203] ALSA device list:
  587. [ 4.082208] #0: audiocodec
  588. [ 4.082211] #1: snddaudio0
  589. [ 4.122519] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
  590. [ 4.133017] devtmpfs: mounted
  591. [ 4.138620] Freeing unused kernel memory: 1024K
  592. mount: mounting none on /dev failed: Resource busy
  593. [ 4.352891] UBIFS (ubi0:5): background thread "ubifs_bgt0_5" started, PID 751
  594. [ 4.419144] UBIFS (ubi0:5): recovery needed
  595. [ 4.554523] UBIFS (ubi0:5): recovery completed
  596. [ 4.560234] UBIFS (ubi0:5): UBIFS: mounted UBI device 0, volume 5, name "rootfs_data"
  597. [ 4.569210] UBIFS (ubi0:5): LEB size: 258048 bytes (252 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
  598. [ 4.580388] UBIFS (ubi0:5): FS size: 50061312 bytes (47 MiB, 194 LEBs), journal size 2580480 bytes (2 MiB, 10 LEBs)
  599. [ 4.592136] UBIFS (ubi0:5): reserved for root: 2364518 bytes (2309 KiB)
  600. [ 4.599585] UBIFS (ubi0:5): media format: w4/r0 (latest is w4/r0), UUID CF4E2B89-581C-4232-B91C-7A3A39534D8C, small LPT model
  601. Error locking file /var/lock/fw_printenv.lock
  602. starting pid 765, tty '': '/etc/preinit'
  603. can't run '/etc/preinit': No such file or directory
  604. starting pid 766, tty '': '/bin/mount -t proc proc /proc'
  605. mount: mounting proc on /proc failed: Resource busy
  606. starting pid 767, tty '': '/bin/mount -t tmpfs tmpfs /run'
  607. starting pid 768, tty '': '/bin/mount -o remount,rw /'
  608. starting pid 769, tty '': '/bin/mkdir -p /dev/pts'
  609. starting pid 770, tty '': '/bin/mkdir -p /dev/shm'
  610. starting pid 771, tty '': '/bin/mount -a'
  611. starting pid 772, tty '': '/bin/hostname -F /etc/hostname'
  612. hostname: can't open '/etc/hostname': No such file or directory
  613. starting pid 773, tty '': '/etc/ini[ 4.741632] UBIFS (ubi0:6): background thread "ubifs_bgt0_6" started, PID 780
  614. t.d/rcS boot'
  615. ------run rc.preboot file-----
  616. [ 4.810468] UBIFS (ubi0:6): recovery needed
  617. [ 4.855673] UBIFS (ubi0:6): recovery completed
  618. [ 4.861352] UBIFS (ubi0:6): UBIFS: mounted UBI device 0, volume 6, name "UDISK"
  619. [ 4.869701] UBIFS (ubi0:6): LEB size: 258048 bytes (252 KiB), min./max. I/O unit sizes: 4096 bytes/4096 bytes
  620. [ 4.880881] UBIFS (ubi0:6): FS size: 34836480 bytes (33 MiB, 135 LEBs), journal size 2064385 bytes (1 MiB, 7 LEBs)
  621. [ 4.892523] UBIFS (ubi0:6): reserved for root: 1645413 bytes (1606 KiB)
  622. [ 4.899969] UBIFS (ubi0:6): media format: w4/r0 (latest is w4/r0), UUID BCC37483-AEA9-4A65-8403-5830B576589B, small LPT model
  623. ------run rc.modules file-----
  624. [ 5.016070] ======== XRADIO WIFI OPEN ========
  625. [ 5.021386] [XRADIO] Driver Label:XR_V02.16.91 _HT40_01.33 Nov 10 2022 09:28:13
  626. [ 5.029817] [XRADIO] Allocated hw_priv @ c2c08c80
  627. [ 5.035293] [XRADIO_ERR] Access_file failed, path:/data/misc/wifi/xr_wifi.conf!
  628. [ 5.044535] sunxi-wlan soc@03000000:wlan@0: bus_index: 1
  629. [ 5.126602]
  630. [ 5.126602] insmod_device_driver
  631. [ 5.126602]
  632. [ 5.134188] device_chose finished 122!
  633. [ 5.172539] sunxi-mmc sdc1: sdc set ios:clk 0Hz bm PP pm UP vdd 21 width 1 timing LEGACY(SDR12) dt B
  634. [ 5.182865] [XRADIO] Detect SDIO card 1
  635. [ 5.197764] sunxi-mmc sdc1: no vqmmc,Check if there is regulator
  636. [ 5.226650] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  637. [ 5.267306] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  638. [ 5.280570] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing LEGACY(SDR12) dt B
  639. [ 5.301743] sunxi-mmc sdc1: sdc set ios:clk 400000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
  640. [ 5.312513] sunxi-mmc sdc1: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 1 timing SD-HS(SDR25) dt B
  641. [ 5.323636] sunxi-mmc sdc1: sdc set ios:clk 50000000Hz bm PP pm ON vdd 21 width 4 timing SD-HS(SDR25) dt B
  642. [ 5.335368] mmc1: new high speed SDIO card at address 0001
  643. [ 5.342383] [SBUS] XRadio Device:sdio clk=50000000
  644. [ 5.349363] [XRADIO] XRADIO_HW_REV 1.0 detected.
  645. [ 5.437123] [XRADIO] xradio_update_dpllctrl: DPLL_CTRL Sync=0x00c00000.
  646. [ 5.471964] [XRADIO] Bootloader complete
  647. [ 5.561790] [XRADIO] Firmware completed.
  648. [ 5.567631] [WSM] Firmware Label:XR_C09.08.52.73_DBG_02.122 2GHZ HT40 May 18 2021 13:36:09
  649. [ 5.585096] [XRADIO] Firmware Startup Done.
  650. [ 5.590174] [XRADIO_WRN] enable Multi-Rx!
  651. [ 5.608334] ieee80211 phy0: Failed to initialize wep: -2
  652. [ 5.614411] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
  653. ------run rc.final file-----
  654. Load mpp modules
  655. [ 5.692166] [VIN_WARN]sensor_helper_probe: cannot get sensor0_cameravdd supply, setting it to NULL!
  656. [ 5.702592] [VIN_WARN]sensor_helper_probe: cannot get sensor0_iovdd supply, setting it to NULL!
  657. [ 5.712610] [VIN_WARN]sensor_helper_probe: cannot get sensor0_avdd supply, setting it to NULL!
  658. [ 5.722433] [VIN_WARN]sensor_helper_probe: cannot get sensor0_dvdd supply, setting it to NULL!
  659. [ 5.803982] sunxi_i2c_do_xfer()1968 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x37)
  660. [ 5.813597] sunxi_i2c_do_xfer()1968 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x37)
  661. [ 5.823265] sunxi_i2c_do_xfer()1968 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x37)
  662. [ 5.832674] [VIN_DEV_I2C]gc2053_mipi sensor read retry = 2
  663. [ 6.050822] sunxi_i2c_do_xfer()1968 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x37)
  664. [ 6.060395] sunxi_i2c_do_xfer()1968 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x37)
  665. [ 6.070013] sunxi_i2c_do_xfer()1968 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x37)
  666. [ 6.079419] [VIN_DEV_I2C]gc2053_mipi sensor read retry = 2
  667. [ 6.286815] sunxi_i2c_do_xfer()1968 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x37)
  668. [ 6.296362] sunxi_i2c_do_xfer()1968 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x37)
  669. [ 6.305927] sunxi_i2c_do_xfer()1968 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x37)
  670. [ 6.315333] [VIN_DEV_I2C]gc2053_mipi sensor read retry = 2
  671. [ 6.541739] sunxi_i2c_do_xfer()1968 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x37)
  672. [ 6.551373] sunxi_i2c_do_xfer()1968 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x37)
  673. [ 6.560929] sunxi_i2c_do_xfer()1968 - [i2c1] incomplete xfer (status: 0x20, dev addr: 0x37)
  674. [ 6.570380] [VIN_DEV_I2C]gc2053_mipi sensor read retry = 2
  675. [ 6.576543] [gc2053_mipi] error, chip found is not an target chip.
  676. [ 6.595975] [VIN_ERR]registering gc2053_mipi, No such device!
  677. insmod: can't insert '/lib/modules/4.9.191/sunxi_aio.ko': No such file or directory
  678. insmod: can't insert '/lib/modules/4.9.191/sunxi_eise.ko': No such file or directory
  679. insmod: can't insert '/lib/modules/4.9.191/nna_sunxi.ko': No such file or directory
  680. Starting logging: start-stop-daemon: unrecognized option: exec
  681. start-stop-daemon: unrecognized option: exec
  682. OK
  683. Populating /dev using udev: [ 6.728834] udevd[878]: could not create /tmp/run/udev: No such file or directory
  684. done
  685. mkdir: can't create directory '/dev/pts': File exists
  686. mkdir: can't create directory '/dev/shm': File exists
  687. Initializing random number generator... done.
  688. cat: can't open '/sys/class/sunxi_info/sys_info': No such file or directory
  689. Starting network: Failed to connect to ubus
  690. /sbin/ifup: line 51: /sbin/wifi: not found
  691. FAIL
  692. ifconfig: invalid hw-addr 00:
  693. udhcpc: SIOCGIFINDEX: No such device
  694. Starting telnetd: OK
  695. enable android usb
  696. insmod: can't insert '/lib/modules/4.9.191/sunxi_usb_udc.ko': No such file or directory
  697. insmod: can't insert '/lib/modules/4.9.191/sunxi_usbc.ko': No such file or directory
  698. [ 7.188930] file system registered
  699. [ 7.209186] configfs-gadget 4100000.udc-controller: failed to start g1: -19
  700. sh: write error: No such device
  701. Starting wifi_deamon....: [ 7.238204] read descriptors
  702. [ 7.241477] read strings
  703. mount: mounting /dev/mmcblk0p1 on /mnt/extsd failed: No such file or directory
  704. starting pid 964, tty '/dev/console': '-/bin/sh'
  705.  
  706.  
  707. BusyBox v1.27.2 () built-in shell (ash)
  708.  
  709. ------run profile file-----
  710. Trying to connect to SWUpdate...
  711. _____ _ __ _
  712. |_ _||_| ___ _ _ | | |_| ___ _ _ _ _
  713. | | _ | || | | |__ | || || | ||_'_|
  714. | | | || | || _ | |_____||_||_|_||___||_,_|
  715. |_| |_||_|_||_|_| Tina is Based on OpenWrt!
  716. ----------------------------------------------
  717. Tina Linux (Neptune, 5C1C9C53)
  718. ----------------------------------------------
  719. root@TinaLinux:/# swu_param: ####
  720. swu_software: ####
  721. swu_mode: ####
  722. no swupdate_cmd to run, wait for next swupdate
  723.  
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!