Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- System:
- Kernel: 5.18.3-arch1-1 arch: x86_64 bits: 64 compiler: gcc v: 12.1.0
- parameters: BOOT_IMAGE=/vmlinuz-linux
- root=UUID=579f3e4b-c717-4cd5-9c76-84b8ba7cdf5d rw rootfstype=ext4
- loglevel=3 fbcon=rotate:3 quiet
- Desktop: N/A dm: N/A Distro: Arch Linux
- Machine:
- Type: Desktop System: CHUWI INNOVATION product: Hi10 Go v: N/A
- serial: <superuser required>
- Mobo: N/A model: N/A serial: <superuser required>
- UEFI: American Megatrends LLC. v: JXX-BI-10.1-S102JWR120-JC86B-070-H
- date: 12/09/2021
- Battery:
- ID-1: BAT0 charge: 28.9 Wh (100.0%) condition: 28.9/28.9 Wh (100.0%)
- volts: 8.7 min: N/A model: WB SR 1 WB Lion Battery type: Li-ion
- serial: <filter> status: charging
- Memory:
- RAM: total: 5.58 GiB used: 380.3 MiB (6.7%)
- RAM Report:
- missing: Required tool dmidecode not installed. Check --recommends
- CPU:
- Info: model: Intel Celeron N5100 bits: 64 type: MCP arch: Tremont
- built: 2019 process: Intel 10nm family: 6 model-id: 0x9C (156) stepping: 0
- microcode: 0x24000023
- Topology: cpus: 1x cores: 4 smt: <unsupported> cache: L1: 256 KiB
- desc: d-4x32 KiB; i-4x32 KiB L2: 1.5 MiB desc: 1x1.5 MiB L3: 4 MiB
- desc: 1x4 MiB
- Speed (MHz): avg: 766 high: 800 min/max: 800/2800 scaling:
- driver: intel_pstate governor: powersave cores: 1: 702 2: 800 3: 763 4: 800
- bogomips: 8912
- Flags: 3dnowprefetch acpi aes aperfmperf apic arat arch_capabilities
- arch_perfmon art bts cat_l2 cdp_l2 clflush clflushopt clwb cmov constant_tsc
- cpuid cpuid_fault cx16 cx8 de ds_cpl dtes64 dtherm dts epb ept ept_ad erms
- est flexpriority flush_l1d fpu fsgsbase fxsr gfni ht hwp hwp_act_window
- hwp_epp hwp_notify hwp_pkg_req ibpb ibrs ibrs_enhanced ida intel_pt
- lahf_lm lm mca mce md_clear mmx monitor movbe movdir64b movdiri msr mtrr
- nonstop_tsc nopl nx pae pat pbe pclmulqdq pdcm pebs pge pln pni popcnt pse
- pse36 pts rdpid rdrand rdseed rdt_a rdtscp rep_good sdbg sep sha_ni smap
- smep split_lock_detect ss ssbd sse sse2 sse4_1 sse4_2 ssse3 stibp syscall
- tm tm2 tpr_shadow tsc tsc_adjust tsc_deadline_timer tsc_known_freq umip
- vme vmx vnmi vpid waitpkg x2apic xgetbv1 xsave xsavec xsaveopt xsaves
- xtopology xtpr
- Vulnerabilities:
- Type: itlb_multihit status: Not affected
- Type: l1tf status: Not affected
- Type: mds status: Not affected
- Type: meltdown status: Not affected
- Type: spec_store_bypass
- mitigation: Speculative Store Bypass disabled via prctl
- Type: spectre_v1
- mitigation: usercopy/swapgs barriers and __user pointer sanitization
- Type: spectre_v2 mitigation: Enhanced IBRS, IBPB: conditional, RSB filling
- Type: srbds status: Not affected
- Type: tsx_async_abort status: Not affected
- Graphics:
- Device-1: Intel JasperLake [UHD Graphics] driver: i915 v: kernel arch: Gen11
- process: Intel 10nm built: 2019-21 ports: active: DSI-1 empty: DP-1,HDMI-A-1
- bus-ID: 00:02.0 chip-ID: 8086:4e61 class-ID: 0300
- Device-2: 5M Camera Back type: USB driver: uvcvideo bus-ID: 1-3:3
- chip-ID: 0bda:5876 class-ID: 0e02 serial: <filter>
- Device-3: Front Camera type: USB driver: uvcvideo bus-ID: 1-4:5
- chip-ID: 0bda:5842 class-ID: 0e02 serial: <filter>
- Display: server: No display server data found. Headless machine?
- note: <missing: xdpyinfo/xrandr>
- Monitor-1: DSI-1 size-res: N/A modes: 1200x1920
- Message: No GL data found on this system.
- Audio:
- Device-1: Intel Jasper Lake HD Audio driver: sof-audio-pci-intel-icl
- alternate: snd_hda_intel,snd_sof_pci_intel_icl bus-ID: 00:1f.3
- chip-ID: 8086:4dc8 class-ID: 0401
- Sound Server-1: ALSA v: k5.18.3-arch1-1 running: yes
- Sound Server-2: PulseAudio v: 16.0 running: no
- Sound Server-3: PipeWire v: 0.3.52 running: no
- Network:
- Device-1: Intel Wireless 3165 driver: iwlwifi v: kernel pcie: gen: 1
- speed: 2.5 GT/s lanes: 1 bus-ID: 01:00.0 chip-ID: 8086:3165 class-ID: 0280
- IF: wlp1s0 state: down mac: <filter>
- Device-2: TP-LINK USB 10/100/1000 LAN type: USB driver: r8152
- bus-ID: 2-3.1:3 chip-ID: 2357:0601 class-ID: 0000 serial: <filter>
- IF: enp0s20f0u3u1 state: up speed: 1000 Mbps duplex: full mac: <filter>
- IP v4: <filter> type: dynamic noprefixroute scope: global
- broadcast: <filter>
- IP v6: <filter> type: dynamic noprefixroute scope: global
- IP v6: <filter> type: dynamic noprefixroute scope: global
- IP v6: <filter> type: noprefixroute scope: link
- WAN IP: <filter>
- Bluetooth:
- Device-1: N/A type: USB driver: btusb v: 0.8 bus-ID: 1-8:7
- chip-ID: 8087:0a2a class-ID: e001
- Report: rfkill ID: hci0 rfk-id: 0 state: down bt-service: not found
- rfk-block: hardware: no software: no address: see --recommends
- Logical:
- Message: No logical block device data found.
- RAID:
- Message: No RAID data found.
- Drives:
- Local Storage: total: 115.25 GiB used: 2.57 GiB (2.2%)
- SMART Message: Required tool smartctl not installed. Check --recommends
- ID-1: /dev/mmcblk0 maj-min: 179:0 model: SCA128 size: 115.25 GiB
- block-size: physical: 512 B logical: 512 B type: SSD serial: <filter>
- rev: 0x8 scheme: GPT
- Message: No optical or floppy data found.
- Partition:
- ID-1: / raw-size: 19.5 GiB size: 19.03 GiB (97.57%) used: 2.4 GiB (12.6%)
- fs: ext4 dev: /dev/mmcblk0p2 maj-min: 179:2 label: N/A
- uuid: 579f3e4b-c717-4cd5-9c76-84b8ba7cdf5d
- ID-2: /boot raw-size: 511 MiB size: 510 MiB (99.80%)
- used: 70.7 MiB (13.9%) fs: vfat dev: /dev/mmcblk0p1 maj-min: 179:1
- label: N/A uuid: 28AC-6B5B
- ID-3: /home raw-size: 95.25 GiB size: 93.2 GiB (97.84%)
- used: 102.8 MiB (0.1%) fs: ext4 dev: /dev/mmcblk0p3 maj-min: 179:3
- label: N/A uuid: 92f66001-753c-438d-83ec-20a89132863a
- Swap:
- Kernel: swappiness: 60 (default) cache-pressure: 100 (default)
- ID-1: swap-1 type: zram size: 2.79 GiB used: 0 KiB (0.0%) priority: 100
- dev: /dev/zram0
- Unmounted:
- ID-1: /dev/mmcblk0boot0 maj-min: 179:8 size: 4 MiB fs: <superuser required>
- label: N/A uuid: N/A
- ID-2: /dev/mmcblk0boot1 maj-min: 179:16 size: 4 MiB
- fs: <superuser required> label: N/A uuid: N/A
- USB:
- Hub-1: 1-0:1 info: Hi-speed hub with single TT ports: 8 rev: 2.0
- speed: 480 Mb/s chip-ID: 1d6b:0002 class-ID: 0900
- Hub-2: 1-1:2 info: Hi-speed hub with multiple TTs ports: 4 rev: 2.1
- speed: 480 Mb/s power: 100mA chip-ID: 05e3:0610 class-ID: 0900
- Device-1: 1-1.4:4 info: Logitech USB Receiver type: Keyboard,Mouse,HID
- driver: logitech-djreceiver,usbhid interfaces: 3 rev: 2.0 speed: 12 Mb/s
- power: 98mA chip-ID: 046d:c52b class-ID: 0300
- Device-2: 1-3:3 info: 5M Camera Back type: Video driver: uvcvideo
- interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 0bda:5876
- class-ID: 0e02 serial: <filter>
- Device-3: 1-4:5 info: Front Camera type: Video driver: uvcvideo
- interfaces: 2 rev: 2.0 speed: 480 Mb/s power: 500mA chip-ID: 0bda:5842
- class-ID: 0e02 serial: <filter>
- Device-4: 1-5:6 info: Generic USB2.0-CRW type: <vendor specific>
- driver: rtsx_usb,rtsx_usb_ms,rtsx_usb_sdmmc interfaces: 1 rev: 2.0
- speed: 480 Mb/s power: 500mA chip-ID: 0bda:0129 class-ID: ff00
- serial: <filter>
- Device-5: 1-8:7 info: N/A type: Bluetooth driver: btusb interfaces: 2
- rev: 2.0 speed: 12 Mb/s power: 100mA chip-ID: 8087:0a2a class-ID: e001
- Hub-3: 2-0:1 info: Super-speed hub ports: 6 rev: 3.1 speed: 10 Gb/s
- chip-ID: 1d6b:0003 class-ID: 0900
- Hub-4: 2-3:2 info: Super-speed hub ports: 4 rev: 3.1 speed: 5 Gb/s
- chip-ID: 05e3:0612 class-ID: 0900
- Device-1: 2-3.1:3 info: TP-LINK USB 10/100/1000 LAN type: Network
- driver: r8152 interfaces: 1 rev: 3.0 speed: 5 Gb/s power: 256mA
- chip-ID: 2357:0601 class-ID: 0000 serial: <filter>
- Sensors:
- System Temperatures: cpu: 43.0 C mobo: N/A
- Fan Speeds (RPM): N/A
- Info:
- Processes: 133 Uptime: 0m wakeups: 1 Init: systemd v: 251 default: graphical
- tool: systemctl Compilers: gcc: 12.1.0 Packages: pacman: 250 lib: 77
- Shell: Bash v: 5.1.16 running-in: pty pts/0 (SSH) inxi: 3.3.17
Advertisement
Add Comment
Please, Sign In to add comment