Bullet64

R5S_first_boot

Jun 14th, 2022
89
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 27.88 KB | None
  1. [sudo] Passwort für frank:
  2.  
  3.  
  4. Willkommen zu minicom 2.7.1
  5.  
  6. Optionen: I18n
  7. Übersetzt am Dec 23 2019, 02:06:26.
  8. Port /dev/ttyUSB0, 17:47:43
  9.  
  10. Drücken Sie CTRL-A Z für Hilfe zu speziellen Tasten
  11. �DDR Version V1.13 20220218
  12. In
  13. ddrconfig:0
  14. LPDDR4X, 324MHz
  15. BW=32 Col=10 Bk=8 CS0 Row=16 CS=1 Die BW=16 Size=2048MB
  16. tdqss: cs0 dqs0: -24ps, dqs1: -120ps, dqs2: -72ps, dqs3: -144ps,
  17.  
  18. change to: 324MHz
  19. PHY drv:clk:36,ca:36,DQ:29,odt:0
  20. vrefinner:24%, vrefout:41%
  21. dram drv:40,odt:0
  22. clk skew:0x63
  23.  
  24. change to: 528MHz
  25. PHY drv:clk:36,ca:36,DQ:29,odt:0
  26. vrefinner:24%, vrefout:41%
  27. dram drv:40,odt:0
  28. clk skew:0x58
  29.  
  30. change to: 780MHz
  31. PHY drv:clk:36,ca:36,DQ:29,odt:0
  32. vrefinner:24%, vrefout:41%
  33. dram drv:40,odt:0
  34. clk skew:0x58
  35.  
  36. change to: 1560MHz(final freq)
  37. PHY drv:clk:36,ca:36,DQ:29,odt:60
  38. vrefinner:16%, vrefout:22%
  39. dram drv:40,odt:80
  40. vref_ca:00000071
  41. clk skew:0x2b
  42. cs 0:
  43. the read training result:
  44. DQS0:0x2d, DQS1:0x32, DQS2:0x32, DQS3:0x2f,
  45. min : 0xa 0xa 0xd 0xb 0x2 0x7 0x9 0x3 , 0x9 0x7 0x2 0x5 0xd 0xb 0,
  46. 0x10 0xe 0xb 0xb 0x4 0x1 0x2 0x5 , 0x8 0x5 0x7 0x0 0xe 0xd 0,
  47. mid :0x25 0x24 0x27 0x25 0x1d 0x20 0x23 0x1e ,0x24 0x22 0x1b 0x1e 0x28 0x26 0x,
  48. 0x2b 0x2b 0x26 0x24 0x1f 0x1c 0x1c 0x1f ,0x23 0x20 0x21 0x1b 0x28 0x28 0x,
  49. max :0x40 0x3e 0x42 0x40 0x38 0x3a 0x3d 0x39 ,0x3f 0x3d 0x35 0x37 0x44 0x42 0x,
  50. 0x47 0x48 0x42 0x3e 0x3a 0x38 0x37 0x39 ,0x3f 0x3b 0x3b 0x37 0x42 0x44 0x,
  51. range:0x36 0x34 0x35 0x35 0x36 0x33 0x34 0x36 ,0x36 0x36 0x33 0x32 0x37 0x37 0x,
  52. 0x37 0x3a 0x37 0x33 0x36 0x37 0x35 0x34 ,0x37 0x36 0x34 0x37 0x34 0x37 0x,
  53. the write training result:
  54. DQS0:0x27, DQS1:0x14, DQS2:0x1d, DQS3:0xf,
  55. min :0x67 0x69 0x6c 0x6b 0x5e 0x63 0x64 0x65 0x65 ,0x4e 0x4d 0x47 0x47 0x54 0x,
  56. 0x63 0x63 0x5e 0x5c 0x57 0x52 0x51 0x58 0x58 ,0x4f 0x4b 0x4c 0x49 0x54 0x,
  57. mid :0x81 0x83 0x86 0x84 0x78 0x7c 0x7e 0x7d 0x7d ,0x69 0x68 0x60 0x61 0x6f 0x,
  58. 0x7d 0x7e 0x77 0x76 0x70 0x6b 0x6c 0x71 0x72 ,0x69 0x66 0x66 0x62 0x6d 0x,
  59. max :0x9c 0x9d 0xa1 0x9d 0x93 0x96 0x98 0x95 0x95 ,0x85 0x84 0x79 0x7b 0x8a 0x,
  60. 0x98 0x99 0x91 0x91 0x8a 0x85 0x88 0x8a 0x8d ,0x84 0x81 0x80 0x7b 0x87 0x,
  61. range:0x35 0x34 0x35 0x32 0x35 0x33 0x34 0x30 0x30 ,0x37 0x37 0x32 0x34 0x36 0x,
  62. 0x35 0x36 0x33 0x35 0x33 0x33 0x37 0x32 0x35 ,0x35 0x36 0x34 0x32 0x33 0x,
  63. CA Training result:
  64. cs:0 min :0x40 0x3b 0x40 0x38 0x40 0x37 0x43 ,0x41 0x3a 0x43 0x3a 0x41 0x3a 0x,
  65. cs:0 mid :0x7c 0x7c 0x7d 0x79 0x7b 0x77 0x6f ,0x7d 0x7a 0x7e 0x7b 0x7d 0x7a 0x,
  66. cs:0 max :0xb9 0xbd 0xba 0xba 0xb7 0xb8 0x9c ,0xb9 0xba 0xb9 0xbc 0xb9 0xbb 0x,
  67. cs:0 range:0x79 0x82 0x7a 0x82 0x77 0x81 0x59 ,0x78 0x80 0x76 0x82 0x78 0x81 0x,
  68. out
  69. U-Boot SPL board init
  70. U-Boot SPL 2017.09-gc2dee0fa582-220119 #root (Mar 04 2022 - 11:39:23)
  71. unknown raw ID phN
  72. unrecognized JEDEC id bytes: 00, 00, 00
  73. Trying to boot from MMC2
  74. SPL: A/B-slot: _a, successful: 0, tries-remain: 7
  75. Trying fit image at 0x4000 sector
  76. ## Verified-boot: 0
  77. ## Checking atf-1 0x00040000 ... sha256(fe4f274c06...) + OK
  78. ## Checking uboot 0x00a00000 ... sha256(754c17dbf6...) + OK
  79. ## Checking fdt 0x00b2bec8 ... sha256(ff87bdc331...) + OK
  80. ## Checking atf-2 0x00068000 ... sha256(8d44036095...) + OK
  81. ## Checking atf-3 0xfdcd0000 ... sha256(e410275b51...) + OK
  82. ## Checking atf-4 0xfdcc9000 ... sha256(990c53fc01...) + OK
  83. ## Checking atf-5 0x00066000 ... sha256(315a4195a9...) + OK
  84. ## Checking optee 0x08400000 ... sha256(66bbd17352...) + OK
  85. Jumping to U-Boot(0x00a00000) via ARM Trusted Firmware(0x00040000)
  86. Total: 444.180 ms
  87.  
  88. INFO: Preloader serial: 2
  89. NOTICE: BL31: v2.3():v2.3-181-gc9a647cae:cl
  90. NOTICE: BL31: Built : 10:55:41, Oct 18 2021
  91. INFO: GICv3 without legacy support detected.
  92. INFO: ARM GICv3 driver initialized in EL3
  93. INFO: pmu v1 is valid
  94. INFO: dfs DDR fsp_param[0].freq_mhz= 1560MHz
  95. INFO: dfs DDR fsp_param[1].freq_mhz= 324MHz
  96. INFO: dfs DDR fsp_param[2].freq_mhz= 528MHz
  97. INFO: dfs DDR fsp_param[3].freq_mhz= 780MHz
  98. INFO: Using opteed sec cpu_context!
  99. INFO: boot cpu mask: 0
  100. INFO: BL31: Initializing runtime services
  101. INFO: BL31: Initializing BL32
  102. I/TC:
  103. I/TC: OP-TEE version: 3.13.0-641-g4167319d3 #hisping.lin (gcc version 10.2.1 204
  104. I/TC: Primary CPU initializing
  105. I/TC: Primary CPU switching to normal world boot
  106. INFO: BL31: Preparing for EL3 exit to normal world
  107. INFO: Entry point address = 0xa00000
  108. INFO: SPSR = 0x3c9
  109.  
  110.  
  111. U-Boot 2017.09-g8c91d15ff7d-220321 #root (Apr 20 2022 - 18:38:50 +0800)
  112.  
  113. Board: NanoPi R5S
  114. PreSerial: 2, raw, 0xfe660000
  115. DRAM: 2 GiB
  116. Sysmem: init
  117. Relocation Offset: 7d34d000
  118. Relocation fdt: 7b9f8ba0 - 7b9fecd8
  119. CR: M/C/I
  120. Using default environment
  121.  
  122. no mmc device at slot 1
  123. dwmmc@fe2b0000: 1 (SD), dwmmc@fe2c0000: 2, sdhci@fe310000: 0
  124. Bootdev(atags): mmc 1
  125. MMC1: Legacy, 52Mhz
  126. PartType: EFI
  127. DM: v1
  128. boot mode: None
  129. Found DTB in resource part
  130. DTB: rk3568-nanopi5-rev01.dtb (163153)
  131. HASH(c): OK
  132. ANDROID: fdt overlay OK
  133. I2c0 speed: 400000Hz
  134. vsel-gpios- not found! Error: -2
  135. vdd_cpu init 900000 uV
  136. PMIC: RK8090 (on=0x40, off=0x00)
  137. vdd_logic init 900000 uV
  138. vdd_gpu init 900000 uV
  139. vdd_npu init 900000 uV
  140. io-domain: OK
  141. Could not find baseparameter partition
  142. I2c5 speed: 400000Hz
  143. Rockchip UBOOT DRM driver version: v1.0.1
  144. VOP have 1 active VP
  145. vp0 have layer nr:6[0 2 4 1 3 5 ], primary plane: 4
  146. vp1 have layer nr:0[], primary plane: 0
  147. vp2 have layer nr:0[], primary plane: 0
  148. hdmi@fe0a0000 disconnected
  149. CLK: (sync kernel. arm: enter 816000 KHz, init 816000 KHz, kernel 0N/A)
  150. apll 1416000 KHz
  151. dpll 780000 KHz
  152. gpll 1188000 KHz
  153. cpll 1000000 KHz
  154. npll 1200000 KHz
  155. vpll 24000 KHz
  156. hpll 24000 KHz
  157. ppll 200000 KHz
  158. armclk 1416000 KHz
  159. aclk_bus 150000 KHz
  160. pclk_bus 100000 KHz
  161. aclk_top_high 500000 KHz
  162. aclk_top_low 400000 KHz
  163. hclk_top 150000 KHz
  164. pclk_top 100000 KHz
  165. aclk_perimid 300000 KHz
  166. hclk_perimid 150000 KHz
  167. pclk_pmu 100000 KHz
  168. vdd_usbc 4981 mV
  169.  
  170. Net: eth0: ethernet@fe2a0000
  171. Hit key to stop autoboot('CTRL+C'): 0
  172. ## Booting FIT Image FIT: No fit blob
  173. FIT: No FIT image
  174. ANDROID: reboot reason: "(none)"
  175. optee api revision: 2.0
  176. TEEC: Waring: Could not find security partition
  177. Not AVB images, AVB skip
  178. No valid android hdr
  179. Android image load failed
  180. Android boot failed, error -1.
  181.  
  182. ## Booting Rockchip Format Image
  183. fdt @ 0x0a100000 (0x00027fe1)
  184. kernel @ 0x00280000 (0x01fd2808)
  185. ramdisk @ 0x0a200000 (0x007233c0)
  186. Fdt Ramdisk skip relocation
  187. ## Flattened Device Tree blob at 0x0a100000
  188. Booting using the fdt blob at 0x0a100000
  189. 'reserved-memory' linux,cma: addr=10000000 size=800000
  190. 'reserved-memory' ramoops@110000: addr=110000 size=f0000
  191. Using Device Tree in place at 000000000a100000, end 000000000a12afe0
  192. vp0, plane_mask:0x3f, primary-id:4, curser-id:-1
  193. vp1, plane_mask:0x0, primary-id:0, curser-id:-1
  194. vp2, plane_mask:0x0, primary-id:0, curser-id:-1
  195. Adding bank: 0x00200000 - 0x08400000 (size: 0x08200000)
  196. Adding bank: 0x09400000 - 0x80000000 (size: 0x76c00000)
  197. == DO RELOCATE == Kernel from 0x00280000 to 0x00400000
  198. Total: 5617.448 ms
  199.  
  200. Starting kernel ...
  201.  
  202. [ 5.689014] Booting Linux on physical CPU 0x0000000000 [0x412fd050]
  203. [ 5.689042] Linux version 5.10.66 (root@jensen) (aarch64-linux-gcc (ctng-1.22
  204. [ 5.697361] Machine model: FriendlyElec NanoPi R5S
  205. [ 5.705475] earlycon: uart8250 at MMIO32 0x00000000fe660000 (options '')
  206. [ 5.708577] printk: bootconsole [uart8250] enabled
  207. [ 5.711398] Reserved memory: created CMA memory pool at 0x0000000010000000, B
  208. [ 5.712130] OF: reserved mem: initialized node linux,cma, compatible id sharl
  209. [ 5.757414] Zone ranges:
  210. [ 5.757666] DMA [mem 0x0000000000200000-0x000000007fffffff]
  211. [ 5.758244] DMA32 empty
  212. [ 5.758515] Normal empty
  213. [ 5.758789] Movable zone start for each node
  214. [ 5.759183] Early memory node ranges
  215. [ 5.759516] node 0: [mem 0x0000000000200000-0x00000000083fffff]
  216. [ 5.760096] node 0: [mem 0x0000000009400000-0x000000007fffffff]
  217. [ 5.760676] Initmem setup node 0 [mem 0x0000000000200000-0x000000007fffffff]
  218. [ 5.775589] psci: probing for conduit method from DT.
  219. [ 5.776073] psci: PSCIv1.1 detected in firmware.
  220. [ 5.776502] psci: Using standard PSCI v0.2 function IDs
  221. [ 5.776988] psci: Trusted OS migration not required
  222. [ 5.777440] psci: SMC Calling Convention v1.2
  223. [ 5.778232] percpu: Embedded 32 pages/cpu s91432 r8192 d31448 u131072
  224. [ 5.778977] Detected VIPT I-cache on CPU0
  225. [ 5.779395] CPU features: detected: GIC system register CPU interface
  226. [ 5.779992] CPU features: detected: Virtualization Host Extensions
  227. [ 5.780569] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
  228. [ 5.781230] alternatives: patching kernel code
  229. [ 5.781943] Built 1 zonelists, mobility grouping on. Total pages: 511496
  230. [ 5.782576] Kernel command line: storagemedia=sd androidboot.storagemedia=sd1
  231. [ 5.786561] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  232. [ 5.787493] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes,)
  233. [ 5.788208] mem auto-init: stack:off, heap alloc:off, heap free:off
  234. [ 5.816451] Memory: 1983680K/2078720K available (14910K kernel code, 3210K r)
  235. [ 5.817907] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  236. [ 5.818554] ftrace: allocating 56797 entries in 222 pages
  237. [ 5.917723] ftrace: allocated 222 pages with 6 groups
  238. [ 5.918616] rcu: Preemptible hierarchical RCU implementation.
  239. [ 5.919151] rcu: RCU event tracing is enabled.
  240. [ 5.919571] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  241. [ 5.920173] Trampoline variant of Tasks RCU enabled.
  242. [ 5.920638] Rude variant of Tasks RCU enabled.
  243. [ 5.921056] Tracing variant of Tasks RCU enabled.
  244. [ 5.921499] rcu: RCU calculated value of scheduler-enlistment delay is 30 ji.
  245. [ 5.922194] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  246. [ 5.926800] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  247. [ 5.929225] GICv3: GIC: Using split EOI/Deactivate mode
  248. [ 5.929719] GICv3: 320 SPIs implemented
  249. [ 5.930074] GICv3: 0 Extended SPIs implemented
  250. [ 5.930528] GICv3: Distributor has no Range Selector support
  251. [ 5.931058] GICv3: 16 PPIs implemented
  252. [ 5.931443] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000
  253. [ 5.932228] ITS [mem 0xfd440000-0xfd45ffff]
  254. [ 5.932689] ITS@0x00000000fd440000: allocated 8192 Devices @29a0000 (indirec)
  255. [ 5.933569] ITS@0x00000000fd440000: allocated 32768 Interrupt Collections @2)
  256. [ 5.934507] ITS: using cache flushing for cmd queue
  257. [ 5.935356] GICv3: using LPI property table @0x00000000029c0000
  258. [ 5.936020] GIC: using cache flushing for LPI property table
  259. [ 5.936549] GICv3: CPU0: using allocated LPI pending table @0x00000000029d000
  260. [ 5.937417] random: get_random_bytes called from start_kernel+0x3ec/0x5e4 wi0
  261. [ 5.967266] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  262. [ 5.968599] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycless
  263. [ 5.969597] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398s
  264. [ 5.971574] Console: colour dummy device 80x25
  265. [ 5.972030] Calibrating delay loop (skipped), value calculated using timer f)
  266. [ 5.972982] pid_max: default: 32768 minimum: 301
  267. [ 5.973555] LSM: Security Framework initializing
  268. [ 5.974061] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, lin)
  269. [ 5.974754] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  270. [ 5.977936] rcu: Hierarchical SRCU implementation.
  271. [ 5.979323] Platform MSI: interrupt-controller@fd440000 domain created
  272. [ 5.980405] PCI/MSI: /interrupt-controller@fd400000/interrupt-controller@fd4d
  273. [ 5.982275] smp: Bringing up secondary CPUs ...
  274. I/TC: Secondary CPU 1 initializing
  275. I/TC: Secondary CPU 1 switching to normal world boot
  276. I/TC: Secondary CPU 2 initializing
  277. I/TC: Secondary CPU 2 switching to normal world boot
  278. I/TC: Secondary CPU 3 initializing
  279. I/TC: Secondary CPU 3 switching to normal world boot
  280. [ 5.984230] Detected VIPT I-cache on CPU1
  281. [ 5.984272] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000
  282. [ 5.984296] GICv3: CPU1: using allocated LPI pending table @0x00000000029e000
  283. [ 5.984359] CPU1: Booted secondary processor 0x0000000100 [0x412fd050]
  284. [ 5.985971] Detected VIPT I-cache on CPU2
  285. [ 5.986007] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000
  286. [ 5.986025] GICv3: CPU2: using allocated LPI pending table @0x00000000029f000
  287. [ 5.986071] CPU2: Booted secondary processor 0x0000000200 [0x412fd050]
  288. [ 5.987665] Detected VIPT I-cache on CPU3
  289. [ 5.987701] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000
  290. [ 5.987719] GICv3: CPU3: using allocated LPI pending table @0x0000000002a0000
  291. [ 5.987762] CPU3: Booted secondary processor 0x0000000300 [0x412fd050]
  292. [ 5.987921] smp: Brought up 1 node, 4 CPUs
  293. [ 5.995148] SMP: Total of 4 processors activated.
  294. [ 5.995584] CPU features: detected: Privileged Access Never
  295. [ 5.996099] CPU features: detected: LSE atomic instructions
  296. [ 5.996612] CPU features: detected: User Access Override
  297. [ 5.997157] CPU features: detected: 32-bit EL0 Support
  298. [ 5.997634] CPU features: detected: Common not Private translations
  299. [ 5.998213] CPU features: detected: RAS Extension Support
  300. [ 5.998710] CPU features: detected: Data cache clean to the PoU not requirede
  301. [ 5.999501] CPU features: detected: CRC32 instructions
  302. [ 5.999974] CPU features: detected: Speculative Store Bypassing Safe (SSBS)
  303. [ 6.000641] CPU features: detected: RCpc load-acquire (LDAPR)
  304. [ 6.005061] CPU: All CPU(s) started at EL2
  305. [ 6.006639] devtmpfs: initialized
  306. [ 6.036587] Trying to unpack rootfs image as initramfs...
  307. [ 6.037104] Registered cp15_barrier emulation handler
  308. [ 6.037585] Registered setend emulation handler
  309. [ 6.038039] KASLR disabled due to lack of seed
  310. [ 6.038726] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ms
  311. [ 6.039637] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
  312. [ 6.040826] pinctrl core: initialized pinctrl subsystem
  313. [ 6.042753] NET: Registered protocol family 16
  314. [ 6.045806] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
  315. [ 6.055059] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic als
  316. [ 6.055854] audit: initializing netlink subsys (disabled)
  317. [ 6.056673] audit: type=2000 audit(0.083:1): state=initialized audit_enabled1
  318. [ 6.059943] thermal_sys: Registered thermal governor 'fair_share'
  319. [ 6.059956] thermal_sys: Registered thermal governor 'step_wise'
  320. [ 6.060523] thermal_sys: Registered thermal governor 'user_space'
  321. [ 6.061837] cpuidle: using governor menu
  322. [ 6.062811] Registered FIQ tty driver
  323. [ 6.063746] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  324. [ 6.064574] ASID allocator initialised with 65536 entries
  325. [ 6.068103] printk: console [ramoops-1] enabled
  326. [ 6.068848] pstore: Registered ramoops as persistent store backend
  327. [ 6.069425] ramoops: using 0xf0000@0x110000, ecc: 0
  328. [ 6.131929] rockchip-gpio fdd60000.gpio0: probed /pinctrl/gpio0@fdd60000
  329. [ 6.133390] rockchip-gpio fe740000.gpio1: probed /pinctrl/gpio1@fe740000
  330. [ 6.134959] rockchip-gpio fe750000.gpio2: probed /pinctrl/gpio2@fe750000
  331. [ 6.136391] rockchip-gpio fe760000.gpio3: probed /pinctrl/gpio3@fe760000
  332. [ 6.137875] rockchip-gpio fe770000.gpio4: probed /pinctrl/gpio4@fe770000
  333. [ 6.138745] rockchip-pinctrl pinctrl: probed pinctrl
  334. [ 6.164464] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  335. [ 6.165102] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  336. [ 6.165723] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  337. [ 6.166344] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  338. [ 6.177367] fiq_debugger fiq_debugger.0: IRQ fiq not found
  339. [ 6.177906] fiq_debugger fiq_debugger.0: IRQ wakeup not found
  340. [ 6.178447] fiq_debugger_probe: could not install nmi irq handler
  341. [ [ 6.179133] printk: console [ttyFIQ0] enabled
  342. 6.179133] printk: console [ttyFIQ0] enabled
  343. [ 6.179932] printk: bootconsole [uart8250] disabled
  344. [ 6.179932] printk: bootconsole [uart8250] disabled
  345. [ 6.180704] Registered fiq debugger ttyFIQ0
  346. [ 6.181863] vcc3v3_sys: supplied by vdd_usbc
  347. [ 6.182366] vcc3v3_sysp: supplied by vdd_usbc
  348. [ 6.182851] vcc5v0_sysp: supplied by vcc3v3_sysp
  349. [ 6.183561] vcc5v0_host: supplied by vcc5v0_sysp
  350. [ 6.184155] pcie30_avdd0v9: supplied by vcc3v3_sys
  351. [ 6.184673] pcie30_avdd1v8: supplied by vcc3v3_sys
  352. [ 6.185397] vcc3v3_pcie: supplied by vcc3v3_sysp
  353. [ 6.186202] iommu: Default domain type: Translated
  354. [ 6.186520] rk_iommu fde4b000.iommu: version = 2
  355. [ 6.188133] rk_iommu fdea0800.iommu: version = 2
  356. [ 6.191816] rk_iommu fded0480.iommu: version = 2
  357. [ 6.293112] Freeing initrd memory: 7308K
  358. [ 66.285701] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
  359. [ 66.285735] rcu: 2-...0: (1 GPs behind) idle=712/1/0x4000000000000000 so
  360. [ 66.285750] (detected by 0, t=18002 jiffies, g=-1131, q=379)
  361. [ 66.285760] Task dump for CPU 2:
  362. [ 66.285771] task:kworker/2:1 state:R running task stack: 0 pid: a
  363. [ 66.285805] Workqueue: pm genpd_power_off_work_fn
  364. [ 66.285821] Call trace:
  365. [ 66.285836] __switch_to+0x178/0x190
  366. [ 66.285850] 0xffffff8003708d80
  367.  
  368.  
  369.  
RAW Paste Data Copied