API tools faq
paste
Advertisement
Guest User

U-boot

a guest
Oct 5th, 2019
468
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 44.75 KB | None | 0 0
raw download clone embed print report
  1. ▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒W_▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒▒GXL:BL1:9ac50e:a1974b;FEAT:ADFC318C;POC:3;RCY:0;EMMC:0;READ:0;0.0;CHK:0;
  2. TE: 91912
  3.  
  4. BL2 Built : 20:32:17, Sep 8 2017.
  5. gxl g6296b83 - xiaobo.gu@droid12
  6.  
  7. set vcck to 1120 mv
  8. set vddee to 1000 mv
  9. Board ID = 2
  10. CPU clk: 1200MHz
  11. DQS-corr enabled
  12. DDR scramble enabled
  13. DDR3 chl: Rank0+1 @ 792MHz - PASS
  14. Rank0: 1024MB(auto)-2T-11
  15. Rank1: 1024MB(auto)-2T-11
  16. DataBus test pass!
  17. AddrBus test pass!
  18. -s
  19. Load fip header from eMMC, src: 0x0000c200, des: 0x01400000, size: 0x00004000
  20. New fip structure!
  21. Load bl30 from eMMC, src: 0x00010200, des: 0x01100000, size: 0x0000d600
  22. Load bl31 from eMMC, src: 0x00020200, des: 0x05100000, size: 0x0002c600
  23. Load bl33 from eMMC, src: 0x00050200, des: 0x01000000, size: 0x00066000
  24. NOTICE: BL3-1: v1.0(release):a625749
  25. NOTICE: BL3-1: Built : 11:25:15, Aug 25 2017
  26. [BL31]: GXL CPU setup!
  27. NOTICE: BL31: BL33 decompress pass
  28. mpu_config_enable:ok
  29. [Image: gxl_v1.1.3243-377db0f 2017-09-07 11:28:58 qiufang.dai@droid07]
  30. OPS=0x82
  31. 67 27 70 53 aa ae 92 dd ff 8e 83 75 [0.317683 Inits done]
  32. secure task start!
  33. high task start!
  34. low task start!
  35. ERROR: Error initializing runtime service opteed_fast
  36.  
  37.  
  38. U-Boot 2015.01 (Oct 24 2017 - 20:30:44)
  39.  
  40. DRAM: 2 GiB
  41. Relocation Offset is: 76eb2000
  42. register usb cfg[0][1] = 0000000077f59c58
  43. [CANVAS]canvas init
  44. boot_device_flag : 1
  45. Nand PHY Ver:1.01.001.0006 (c) 2013 Amlogic Inc.
  46. init bus_cycle=6, bus_timing=7, system=5.0ns
  47. reset failed
  48. get_chip_type and ret:fffffffe
  49. get_chip_type and ret:fffffffe
  50. chip detect failed and ret:fffffffe
  51. nandphy_init failed and ret=0xfffffff1
  52. MMC: aml_priv->desc_buf = 0x0000000073eb26b0
  53. aml_priv->desc_buf = 0x0000000073eb49d0
  54. SDIO Port B: 0, SDIO Port C: 1
  55. emmc/sd response timeout, cmd8, status=0x1ff2800
  56. emmc/sd response timeout, cmd55, status=0x1ff2800
  57. init_part() 293: PART_TYPE_AML
  58. [mmc_init] mmc init success
  59. dtb magic 5f4c4d41
  60. Amlogic multi-dtb tool
  61. Multi dtb detected
  62. Multi dtb tool version: v2 .
  63. Support 2 lt▒s~▒▒▒▒ am▒ŵ▒▒▒variant: 2g
  64. dtb 0 ▒▒':▒▒ plat: p21r ▒▒▒ɥ▒ 1g
  65. dt▒L▒▒▒▒
  66. ▒▒ plat: p212 vari: 2g
  67. Find match dtb: 1
  68. start d▒.Iՙ▒▒▒▒0000000p3eb7200<l|▒ad򮂂▒▒▒▒▒0?3▒cr200
  69. Amlogic multi-dtb tool
  70. Multi dtb detected
  71. Multi dtb tool version: v2 .
  72. Support 2 dtbs.
  73. aml_dt soc: gxl platform: p212 variant: 2g
  74. dtb 0 soc: gxl plat: p212 vari: 1g
  75. dtb 1 soc: gxl plat: p212 vari: 2g
  76. Find match dtb: 1
  77. parts: 10
  78. 00: logo 0000000002000000 1
  79. 01: recovery 0000000002000000 1
  80. 02: rsv 0000000000800000 1
  81. 03: tee 0000000000800000 1
  82. 04: crypt 0000000002000000 1
  83. 05: misc 0000000002000000 1
  84. 06: boot 0000000002000000 1
  85. 07: system 0000000080000000 1
  86. 08: cache 0000000020000000 2
  87. 09: data ffffffffffffffff 4
  88. init_part() 293: PART_TYPE_AML
  89. eMMC/TSD partition table have been checked OK!
  90. check pattern success
  91. mmc env offset: 0x27400000
  92. In: serial
  93. Out: serial
  94. Err: serial
  95. reboot_mode=cold_boot
  96. [store]To run cmd[emmc dtb_read 0x1000000 0x40000]
  97. _verify_dtb_checksum()-917: calc 92d51a0d, store 92d51a0d
  98. _verify_dtb_checksum()-917: calc 92d51a0d, store 92d51a0d
  99. dtb_read()-1039: total valid 2
  100. dtb_read()-1106: do nothing
  101. Amlogic multi-dtb tool
  102. Multi dtb detect▒C!jձѥ▒dtb tool version: v2 .
  103. Support 2 dtbs.
  104. aml_dt soc: gxl platform: p212 variant: 2g
  105. dtb 0 soc: gxl plat: p212 vari: 1g
  106. dtb 1▒soc: gxl plat: p212 vari: 2g
  107. `▒▒▒▒▒▒▒|>▒▒,'▒▒▒>▒ߟ▒Z
  108. "▒▒▒ 7
  109. vpu: set clk: 666667000Hz, readback: 666660000Hz(0x300)
  110. vpu: vpu_clk_gate_init_off
  111. vpp: vpp_init▒▒▒5хѕ▒0
  112. cvbs performance type = 6, table = 0
  113. Net: dwmac.c9410000amlkey_init() enter!
  114. [EFUSE_MSG]keynum is 4
  115. [BL31]: tee size: 0
  116. [BL31]: tee size: 0
  117.  
  118. Start read misc partition datas!
  119. info->attemp_times = 0
  120. info->active_slot = 0
  121. info->slot_info[0].bootable = 1
  122. info->slot_info[0].online = 1
  123. info->slot_info[1].bootable = 0
  124. info->slot_info[1].online = 0
  125. info->attemp_times = 0
  126. attemp_times = 0
  127. active slot = 0
  128. wipe_data=successful
  129. wipe_cache=successful
  130. upgrade_step=2
  131. [OSD]load fb addr from dts
  132. [OSD]fb_addr for logo: 0x7f851000
  133. [OSD]load fb addr from dts
  134. [OSD]fb_addr for logo: 0x7f851000
  135. [CANVAS]addr=0x7f851000 width=3840, height=2160
  136. amlkey_init() enter!
  137. amlkey_init() 71: already init!
  138. [EFUSE_MSG]keynum is 4
  139. [BL31]: tee size: 0
  140. [KM]Error:f[key_manage_query_size]L507:key[usid] not programed yet
  141. [BL31]: tee size: 0
  142. [BL31]: tee size: 0
  143. [BL31]: tee size: 0
  144. [BL31]: tee size: 0
  145. [KM]Error:f[key_manage_query_size]L507:key[deviceid] not programed yet
  146. gpio: pin GPIOAO_2 (gpio 102) value is 1
  147. InUsbBurn
  148. noSof
  149. Hit Enter or space or Ctrl+C key to stop autoboot -- : 0
  150. card in
  151. init_part() 278: PART_TYPE_DOS
  152. [mmc_init] mmc init success
  153. Device: SDIO Port B
  154. Manufacturer ID: 3
  155. OEM: 5344
  156. Name: SL16G
  157. Tran Speed: 50000000
  158. Rd Block Len: 512
  159. SD version 3.0
  160. High Capacity: Yes
  161. Capacity: 14.8 GiB
  162. mmc clock: 40000000
  163. Bus Width: 4-bit
  164. reading kernel.img
  165. 8656896 bytes read in 473 ms (17.5 MiB/s)
  166. reading dtb.img
  167. 79872 bytes read in 8 ms (9.5 MiB/s)
  168. sd dtb.img loaded
  169. ee_gate_off ...
  170. ## Booting Android Image at 0x01080000 ...
  171. reloc_addr =73f37450
  172. copy done
  173. load dtb from 0x1000000 ......
  174. Amlogic multi-dtb tool
  175. Multi dtb detected
  176. Multi dtb tool version: v2 .
  177. Support 2 dtbs.
  178. aml_dt soc: gxl platform: p212 variant: 2g
  179. dtb 0 soc: gxl plat: p212 vari: 1g
  180. dtb 1 soc: gxl plat: p212 vari: 2g
  181. Find match dtb: 1
  182. Uncompressing Kernel Image ... OK
  183. kernel loaded at 0x01080000, end = 0x01d28378
  184. Loading Ramdisk to 73c3a000, end 73ea0039 ... OK
  185. Loading Device Tree to 000000001fff3000, end 000000001ffff418 ... OK
  186. fdt_instaboot: no instaboot image
  187.  
  188. Starting kernel ...
  189.  
  190. uboot time: 2806074 us
  191. [ 0.000000@0] Initializing cgroup subsys cpu
  192. [ 0.000000@0] Linux version 3.14.29 (root@source) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 SMP Tue Aug 21 14:02:31 EEST 2018
  193. [ 0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
  194. [ 0.000000@0] no prop version_code
  195. [ 0.000000@0] bootconsole [earlycon0] enabled
  196. [ 0.000000@0] fdt Reserved memory table:
  197. [ 0.000000@0] linux,meson-fb: 0x000000007e000000 - 0x0000000080000000 (32 MiB)
  198. [ 0.000000@0] linux,di: 0x000000007c200000 - 0x000000007e000000 (30 MiB)
  199. [ 0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x000000007c200000, size 30 MiB
  200. [ 0.000000@0] linux,ion-dev: 0x0000000079200000 - 0x000000007c200000 (48 MiB)
  201. [ 0.000000@0] linux,ppmgr: 0x0000000079200000 - 0x0000000079200000 (0 MiB)
  202. [ 0.000000@0] linux,codec_mm_cma: 0x0000000067c00000 - 0x0000000073c00000 (192 MiB)
  203. [ 0.000000@0] linux,picdec: 0x0000000079200000 - 0x0000000079200000 (0 MiB)
  204. [ 0.000000@0] Reserved memory: incorrect alignment of CMA region
  205. [ 0.000000@0] linux,codec_mm_reserved: 0x0000000075100000 - 0x0000000079200000 (65 MiB)
  206. [ 0.000000@0] fdt Reserved memory total: 371 MiB
  207. [ 0.000000@0] cma: Reserved 12 MiB at 74400000
  208. [ 0.000000@0] psci: probing function IDs from device-tree
  209. [ 0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc0750a1000 s17344 r8192 d23616 u49152
  210. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 505748
  211. [ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive logo=osd1,loaded,0x3d800000,576cvbs maxcpus=4 vout=576cvbs,enable hdmimode=2160p60hz cvbsmode=576cvbs hdmitx= cvbsdrv=0 androidboot.firstboot=0 jtag=apao androidboot.hardware=amlogic mac=68:1d:ef:01:82:a8 androidboot.mac=68:1d:ef:01:82:a8 androidboot.slot_suffix=_a bootfromsd console=tty0 systemd.show_status=auto
  212. [ 0.000000@0] logo: osd1
  213. [ 0.000000@0] logo: loaded
  214. [ 0.000000@0] logo: 0x3d800000
  215. [ 0.000000@0] logo: 576cvbs
  216. [ 0.000000@0] vout_serve: 2160p60hz
  217. [ 0.000000@0] vout_serve: en: 1
  218. [ 0.000000@0] logo: get hdmimode: 2160p60hz
  219. [ 0.000000@0] logo: get cvbsmode: 576cvbs
  220. [ 0.000000@0] tv_vout: cvbs performance line = 0
  221. [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
  222. [ 0.000000@0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  223. [ 0.000000@0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  224. [ 0.000000@0] Memory: 1643124K/2059264K available (7847K kernel code, 888K rwdata, 3124K rodata, 1092K init, 2920K bss, 416140K reserved)
  225. [ 0.000000@0] Virtual kernel memory layout:
  226. [ 0.000000@0] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB)
  227. [ 0.000000@0] vmemmap : 0xffffff8040010000 - 0xffffff8042380000 ( 35 MB)
  228. [ 0.000000@0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  229. [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc07e000000 ( 2016 MB)
  230. [ 0.000000@0] .init : 0xffffffc001b38000 - 0xffffffc001c493c0 ( 1093 kB)
  231. [ 0.000000@0] .text : 0xffffffc001080000 - 0xffffffc001b37d54 ( 10976 kB)
  232. [ 0.000000@0] .data : 0xffffffc001c4a000 - 0xffffffc001d28378 ( 889 kB)
  233. [ 0.000000@0] PM: Registered nosave memory: [mem 0x01080000-0x01b36fff]
  234. [ 0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
  235. [ 0.000000@0] arch_multi_cluster:0
  236. [ 0.000000@0] Hierarchical RCU implementation.
  237. [ 0.000000@0] RCU debugfs-based tracing is enabled.
  238. [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
  239. [ 0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys).
  240. [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
  241. [ 0.008244@0] meson_bc_timer: mclk->mux_reg =ffffff800000c990,mclk->reg =ffffff800000e994
  242. [ 0.016748@0] Console: colour dummy device 80x25
  243. [ 0.021087@0] console [tty0] enabled
  244. [ 0.024672@0] bootconsole [earlycon0] disabled
  245. domain-0 init dvfs: 4
  246. [ 0.000000@0] Initializing cgroup subsys cpu
  247. [ 0.000000@0] Linux version 3.14.29 (root@source) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #1 SMP Tue Aug 21 14:02:31 EEST 2018
  248. [ 0.000000@0] CPU: AArch64 Processor [410fd034] revision 4
  249. [ 0.000000@0] no prop version_code
  250. [ 0.000000@0] bootconsole [earlycon0] enabled
  251. [ 0.000000@0] fdt Reserved memory table:
  252. [ 0.000000@0] linux,meson-fb: 0x000000007e000000 - 0x0000000080000000 (32 MiB)
  253. [ 0.000000@0] linux,di: 0x000000007c200000 - 0x000000007e000000 (30 MiB)
  254. [ 0.000000@0] DI: DI reserved memory: created CMA memory pool at 0x000000007c200000, size 30 MiB
  255. [ 0.000000@0] linux,ion-dev: 0x0000000079200000 - 0x000000007c200000 (48 MiB)
  256. [ 0.000000@0] linux,ppmgr: 0x0000000079200000 - 0x0000000079200000 (0 MiB)
  257. [ 0.000000@0] linux,codec_mm_cma: 0x0000000067c00000 - 0x0000000073c00000 (192 MiB)
  258. [ 0.000000@0] linux,picdec: 0x0000000079200000 - 0x0000000079200000 (0 MiB)
  259. [ 0.000000@0] Reserved memory: incorrect alignment of CMA region
  260. [ 0.000000@0] linux,codec_mm_reserved: 0x0000000075100000 - 0x0000000079200000 (65 MiB)
  261. [ 0.000000@0] fdt Reserved memory total: 371 MiB
  262. [ 0.000000@0] cma: Reserved 12 MiB at 74400000
  263. [ 0.000000@0] psci: probing function IDs from device-tree
  264. [ 0.000000@0] PERCPU: Embedded 12 pages/cpu @ffffffc0750a1000 s17344 r8192 d23616 u49152
  265. [ 0.000000@0] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 505748
  266. [ 0.000000@0] Kernel command line: rootfstype=ramfs init=/init console=ttyS0,115200 no_console_suspend earlyprintk=aml-uart,0xc81004c0 ramoops.pstore_en=1 ramoops.record_size=0x8000 ramoops.console_size=0x4000 androidboot.selinux=permissive logo=osd1,loaded,0x3d800000,576cvbs maxcpus=4 vout=576cvbs,enable hdmimode=2160p60hz cvbsmode=576cvbs hdmitx= cvbsdrv=0 androidboot.firstboot=0 jtag=apao androidboot.hardware=amlogic mac=68:1d:ef:01:82:a8 androidboot.mac=68:1d:ef:01:82:a8 androidboot.slot_suffix=_a bootfromsd console=tty0 systemd.show_status=auto
  267. [ 0.000000@0] logo: osd1
  268. [ 0.000000@0] logo: loaded
  269. [ 0.000000@0] logo: 0x3d800000
  270. [ 0.000000@0] logo: 576cvbs
  271. [ 0.000000@0] vout_serve: 2160p60hz
  272. [ 0.000000@0] vout_serve: en: 1
  273. [ 0.000000@0] logo: get hdmimode: 2160p60hz
  274. [ 0.000000@0] logo: get cvbsmode: 576cvbs
  275. [ 0.000000@0] tv_vout: cvbs performance line = 0
  276. [ 0.000000@0] PID hash table entries: 4096 (order: 3, 32768 bytes)
  277. [ 0.000000@0] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  278. [ 0.000000@0] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  279. [ 0.000000@0] Memory: 1643124K/2059264K available (7847K kernel code, 888K rwdata, 3124K rodata, 1092K init, 2920K bss, 416140K reserved)
  280. [ 0.000000@0] Virtual kernel memory layout:
  281. [ 0.000000@0] vmalloc : 0xffffff8000000000 - 0xffffff8040000000 ( 1024 MB)
  282. [ 0.000000@0] vmemmap : 0xffffff8040010000 - 0xffffff8042380000 ( 35 MB)
  283. [ 0.000000@0] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
  284. [ 0.000000@0] memory : 0xffffffc000000000 - 0xffffffc07e000000 ( 2016 MB)
  285. [ 0.000000@0] .init : 0xffffffc001b38000 - 0xffffffc001c493c0 ( 1093 kB)
  286. [ 0.000000@0] .text : 0xffffffc001080000 - 0xffffffc001b37d54 ( 10976 kB)
  287. [ 0.000000@0] .data : 0xffffffc001c4a000 - 0xffffffc001d28378 ( 889 kB)
  288. [ 0.000000@0] PM: Registered nosave memory: [mem 0x01080000-0x01b36fff]
  289. [ 0.000000@0] SLUB: HWalign=64, Order=0-1, MinObjects=0, CPUs=4, Nodes=1
  290. [ 0.000000@0] arch_multi_cluster:0
  291. [ 0.000000@0] Hierarchical RCU implementation.
  292. [ 0.000000@0] RCU debugfs-based tracing is enabled.
  293. [ 0.000000@0] NR_IRQS:64 nr_irqs:64 0
  294. [ 0.000000@0] Architected cp15 timer(s) running at 24.00MHz (phys).
  295. [ 0.000004@0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 2863311519744ns
  296. [ 0.008244@0] meson_bc_timer: mclk->mux_reg =ffffff800000c990,mclk->reg =ffffff800000e994
  297. [ 0.016748@0] Console: colour dummy device 80x25
  298. [ 0.021087@0] console [tty0] enabled
  299. [ 0.024672@0] bootconsole [earlycon0] disabled
  300. [ 0.029152@0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
  301. [ 0.029168@0] pid_max: default: 32768 minimum: 301
  302. [ 0.029291@0] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  303. [ 0.029304@0] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  304. [ 0.031249@0] device-tree: Duplicate name in /efusekey, renamed to "key0#1"
  305. [ 0.031268@0] device-tree: Duplicate name in /efusekey, renamed to "key1#1"
  306. [ 0.031280@0] device-tree: Duplicate name in /efusekey, renamed to "key2#1"
  307. [ 0.031293@0] device-tree: Duplicate name in /efusekey, renamed to "key3#1"
  308. [ 0.033991@0] ftrace: allocating 26731 entries in 105 pages
  309. [ 0.060326@0] /cpus/cpu@0: Missing clock-frequency property
  310. [ 0.060351@0] /cpus/cpu@1: Missing clock-frequency property
  311. [ 0.060363@0] /cpus/cpu@2: Missing clock-frequency property
  312. [ 0.060374@0] /cpus/cpu@3: Missing clock-frequency property
  313. [ 0.061870@0] Meson chip version = RevB (21:B - 82:0)
  314. [ 0.062269@1] CPU1: Booted secondary processor
  315. [ 0.062612@2] CPU2: Booted secondary processor
  316. [ 0.062919@3] CPU3: Booted secondary processor
  317. [ 0.062981@0] Brought up 4 CPUs
  318. [ 0.063011@0] SMP: Total of 4 processors activated.
  319. [ 0.063470@0] devtmpfs: initialized
  320. [ 0.070350@0] instabooting: 0
  321. [ 0.076715@0] pinctrl core: initialized pinctrl subsystem
  322. [ 0.077252@0] regulator-dummy: no parameters
  323. [ 0.077862@0] NET: Registered protocol family 16
  324. [ 0.080273@0] aml_vdac_init: module init
  325. [ 0.080411@0] register canvas platform driver
  326. [ 0.080479@0] register rdma platform driver
  327. [ 0.082001@0] vdso: 2 pages (1 code, 1 data) at base ffffffc001c54000
  328. [ 0.082523@0] DMA: preallocated 1024 KiB pool for atomic allocations
  329. [ 0.083459@0] software IO TLB [mem 0x64800000-0x64c00000] (4MB) mapped at [ffffffc064800000-ffffffc064bfffff]
  330. [ 0.083846@0] aml_i2c version: 20140813
  331. [ 0.084042@0] i2c-core: driver [pmu4] using legacy resume method
  332. [ 0.084108@0] codec_mm:codec_mm_module_init
  333. [ 0.084376@0] gxbb_mpll_clk: register mpll_clk_out0 success done
  334. [ 0.084391@0] gxbb_mpll_clk: register mpll_clk_out1 success done
  335. [ 0.084403@0] gxbb_mpll_clk: register mpll_clk_out2 success done
  336. [ 0.084589@0] clk_sys: register PLL sys_pll success done
  337. [ 0.084608@0] gxl_clk: [ xtal ] ->clockrate: 24000000Hz
  338. [ 0.084618@0] gxl_clk: [ 32Khz ] ->clockrate: 32000Hz
  339. [ 0.084627@0] gxl_clk: [ clk81 ] ->clockrate: 166666666Hz
  340. [ 0.084637@0] gxl_clk: [ fixed_pll ] ->clockrate: 2000000000Hz
  341. [ 0.084646@0] gxl_clk: [ fclk_div2 ] ->clockrate: 1000000000Hz
  342. [ 0.084656@0] gxl_clk: [ fclk_div3 ] ->clockrate: 666666666Hz
  343. [ 0.084665@0] gxl_clk: [ fclk_div4 ] ->clockrate: 500000000Hz
  344. [ 0.084674@0] gxl_clk: [ fclk_div5 ] ->clockrate: 400000000Hz
  345. [ 0.084683@0] gxl_clk: [ fclk_div7 ] ->clockrate: 285714285Hz
  346. [ 0.084714@0] gxl_clk: clock initialization complete
  347. [ 0.084927@0] clkmsr: Gxl msr_clk_reg0=ffffff800011c75c,msr_clk_reg2=ffffff800011e764
  348. [ 0.087031@0] aml_iomap: amlogic iomap probe done
  349. [ 0.087560@0] pinmux-gxl c1109880.pinmux: Init pinux probe!
  350. [ 0.088344@0] pinmux-gxl c1109880.pinmux: Probed amlogic pinctrl driver
  351. [ 0.088790@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0)
  352. [ 0.088818@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0)
  353. [ 0.088957@0] genirq: Setting trigger mode 8 for irq 241 failed (gic_set_type+0x0/0xc0)
  354. [ 0.088980@0] genirq: Setting trigger mode 8 for irq 242 failed (gic_set_type+0x0/0xc0)
  355. [ 0.092968@0] codec_mm has 2 memory regions
  356. [ 0.093011@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok
  357. [ 0.093030@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok
  358. [ 0.093125@0] codec_mm has 2 memory regions
  359. [ 0.093145@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_cma ok
  360. [ 0.093161@0] codec_mm codec_mm.19: assigned reserved memory node linux,codec_mm_reserved ok
  361. [ 0.094605@0] vpu: driver version: v03
  362. [ 0.094641@0] vpu: load vpu_clk: 666667000Hz(7)
  363. [ 0.094727@0] vpu: vpu_probe OK
  364. [ 0.095955@0] tv_vout: tvout_probe
  365. [ 0.095973@0] tv_vout: chrdev devno 266338304 for disp
  366. [ 0.095983@0] vout_notify: vout_register_server
  367. [ 0.095991@0] tv_vout: register tv module server ok
  368. [ 0.096199@0] tv_vout: create cdev tv
  369. [ 0.096211@0] tv_vout: tvout_probe OK
  370. [ 0.096687@0] canvas_probe reg=00000000c8838000,size=400
  371. [ 0.096717@0] canvas maped reg_base =ffffff800013e000
  372. [ 0.100292@0] rdma_probe
  373. [ 0.333780@0] bio: create slab <bio-0> at 0
  374. [ 0.334553@0] SCSI subsystem initialized
  375. [ 0.335048@0] usbcore: registered new interface driver usbfs
  376. [ 0.335136@0] usbcore: registered new interface driver hub
  377. [ 0.335242@0] usbcore: registered new device driver usb
  378. [ 0.335904@0] i2c-gpio i2c_gpio.37: using pins 172 (SDA) and 173 (SCL)
  379. [ 0.336019@0] Linux video capture interface: v2.00
  380. [ 0.336136@0] pps_core: LinuxPPS API ver. 1 registered
  381. [ 0.336147@0] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  382. [ 0.336210@0] PTP clock support registered
  383. [ 0.336570@0] hdmitx: system: amhdmitx_init
  384. [ 0.336581@0] hdmitx: system: Ver: 2014May6
  385. [ 0.336746@0] hdmitx: system: amhdmitx_probe
  386. [ 0.337045@0] hdmitx: system: not find match init-data
  387. [ 0.337056@0] hdmitx: system: not find match pwr-ctl
  388. [ 0.337066@0] hdmitx hpd irq = 89
  389. [ 0.337572@0] hdmitx20: Mapped PHY: 0xc0800000
  390. [ 0.337589@0] hdmitx20: Mapped PHY: 0xc1104400
  391. [ 0.337610@0] hdmitx20: Mapped PHY: 0xc8100000
  392. [ 0.337620@0] hdmitx20: Mapped PHY: 0xc8834000
  393. [ 0.337629@0] hdmitx20: Mapped PHY: 0xc883a000
  394. [ 0.337637@0] hdmitx20: Mapped PHY: 0xc883c000
  395. [ 0.337651@0] hdmitx20: Mapped PHY: 0xd0100000
  396. [ 0.337660@0] hdmitx20: Mapped PHY: 0xda83a000
  397. [ 0.337921@0] avmute set to 1
  398. [ 0.338307@0] tv_vout: tv_set_current_vmode[919]fps_target_mode=32
  399. [ 0.338323@0] tv_vout: mode is 32,sync_duration_den=1,sync_duration_num=60
  400. [ 0.338341@0] tv_vout: already display in uboot
  401. [ 0.338349@0] vout_serve: vinfo mode is: 2160p60hz
  402. [ 0.338358@0] vout_serve: init mode 2160p60hz
  403. [ 0.338575@0] vout_serve: create_vout_fops OK
  404. [ 0.338586@0] vout_serve: create vout attribute OK
  405. [ 0.338594@0] vout_serve: meson_vout_probe OK
  406. [ 0.338760@0] logo: logo_init
  407. [ 0.338992@0] osd_rdma: osd_rdma_init: rdma_table p=0x74501000,op=0x74501000 , v=0xffffff8000171000
  408. [ 0.339024@0] rdma_register, rdma_table_addr ffffff8000177000 rdma_table_addr_phy 74502000 reg_buf ffffffc000223000
  409. [ 0.339039@0] rdma_register success, handle 1 table_size 4096
  410. [ 0.339048@0] osd_rdma: osd_rdma_init:osd reset rdma handle = 1.
  411. [ 0.339076@0] rdma_register, rdma_table_addr ffffff8000179000 rdma_table_addr_phy 74503000 reg_buf ffffffc0644c6000
  412. [ 0.339090@0] rdma_register success, handle 2 table_size 4096
  413. [ 0.339098@0] osd_rdma: osd_rdma_init:osd rdma handle = 2.
  414. [ 0.339228@0] Advanced Linux Sound Architecture Driver Initialized.
  415. [ 0.341505@0] Switched to clocksource arch_sys_counter
  416. [ 0.359876@0] NET: Registered protocol family 2
  417. [ 0.360352@0] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  418. [ 0.360476@0] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  419. [ 0.360722@0] TCP: Hash tables configured (established 16384 bind 16384)
  420. [ 0.360791@0] TCP: reno registered
  421. [ 0.360806@0] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  422. [ 0.360856@0] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  423. [ 0.361065@0] NET: Registered protocol family 1
  424. [ 0.361294@0] RPC: Registered named UNIX socket transport module.
  425. [ 0.361307@0] RPC: Registered udp transport module.
  426. [ 0.361316@0] RPC: Registered tcp transport module.
  427. [ 0.361324@0] RPC: Registered tcp NFSv4.1 backchannel transport module.
  428. [ 0.361537@0] aml_wifi wifi.32: [wifi_dev_probe] no power_on_pin2
  429. [ 0.361551@0] aml_wifi wifi.32: [wifi_dev_probe] set pwm as 32k output
  430. [ 0.361601@0] aml_wifi wifi.32: [wifi_dev_probe] dhd_static_buf setup
  431. [ 0.361663@0] Wifi: bcmdhd_init_wlan_mem: bcmdhd_init_wlan_mem: WIFI MEM Allocated
  432. [ 0.361677@0] aml_wifi wifi.32: [wifi_dev_probe] interrupt_pin=241
  433. [ 0.361688@0] aml_wifi wifi.32: [wifi_dev_probe] irq_num=100, irq_trigger_type=1
  434. [ 0.361701@0] aml_wifi wifi.32: [wifi_dev_probe] power_on_pin=240
  435. [ 0.361712@0] aml_wifi wifi.32: [wifi_dev_probe] clock_32k_pin=0
  436. [ 0.362006@0] aml_wifi wifi.32: [wifi_setup_dt] wifi_setup_dt
  437. [ 0.362045@0] aml_wifi wifi.32: [wifi_setup_dt] interrupt_pin(241)
  438. [ 0.362064@0] aml_wifi wifi.32: [wifi_setup_dt] power_on_pin(240)
  439. [ 0.362242@0] Unpacking initramfs...
  440. [ 0.391183@0] Freeing initrd memory: 2456K (ffffffc073c3a000 - ffffffc073ea0000)
  441. [ 0.393910@0] futex hash table entries: 1024 (order: 4, 65536 bytes)
  442. [ 0.401848@0] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  443. [ 0.403173@0] NFS: Registering the id_resolver key type
  444. [ 0.403232@0] Key type id_resolver registered
  445. [ 0.403242@0] Key type id_legacy registered
  446. [ 0.403257@0] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  447. [ 0.403991@0] msgmni has been set to 3622
  448. [ 0.404951@0] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  449. [ 0.404976@0] io scheduler noop registered (default)
  450. [ 0.404986@0] io scheduler deadline registered
  451. [ 0.405145@0] io scheduler cfq registered
  452. [ 0.405859@0] meson-rng c8834000.rng: hwrng registered
  453. [ 0.408882@0] loop: module loaded
  454. [ 0.410479@0] tun: Universal TUN/TAP device driver, 1.6
  455. [ 0.410499@0] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
  456. [ 0.414881@0] libphy: stmmac: probed
  457. [ 0.414904@0] eth0: PHY ID 01814400 at 8 IRQ POLL (stmmac-0:08) active
  458. [ 0.415291@0] PPP generic driver version 2.4.2
  459. [ 0.415500@0] NET: Registered protocol family 24
  460. [ 0.415604@0] usbcore: registered new interface driver smsc95xx
  461. [ 0.415895@0] platform c9000000.dwc3: Driver dwc3 requests probe deferral
  462. [ 0.416010@0] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  463. [ 0.416034@0] ehci-h20ahb: H20AHB-EHCI Host Controller driver
  464. [ 0.416216@0] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  465. [ 0.416479@0] usbcore: registered new interface driver usb-storage
  466. [ 0.416676@0] usbcore: registered new interface driver usbserial
  467. [ 0.416753@0] usbcore: registered new interface driver usbserial_generic
  468. [ 0.416827@0] usbserial: USB Serial support registered for generic
  469. [ 0.416906@0] usbcore: registered new interface driver pl2303
  470. [ 0.416978@0] usbserial: USB Serial support registered for pl2303
  471. [ 0.417429@0] amlogic-new-usb2 d0078000.usb2phy: USB2 phy probe:phy_mem:0xd0078000, iomap phy_base:0xffffff8000284000
  472. [ 0.417606@0] amlogic-new-usb3 d0078080.usb3phy: This phy has no usb port
  473. [ 0.417631@0] amlogic-new-usb3 d0078080.usb3phy: USB3 phy probe:phy_mem:0xd0078080, iomap phy_base:0xffffff8000286080
  474. [ 0.417893@0] mousedev: PS/2 mouse device common for all mice
  475. [ 0.418093@0] i2c /dev entries driver
  476. [ 0.418786@0] ledtrig-cpu: registered to indicate activity on CPUs
  477. [ 0.418938@0] hidraw: raw HID events driver (C) Jiri Kosina
  478. [ 0.420828@0] usbcore: registered new interface driver usbhid
  479. [ 0.420848@0] usbhid: USB HID core driver
  480. [ 0.421080@0] meson_uart c81004c0.serial: ==uart0 reg addr = ffffff80002884c0
  481. [ 0.421113@0] c81004c0.serial: ttyS0 at MMIO 0xc81004c0 (irq = 225, base_baud = 1500000) is a meson_uart
  482. [ 0.421135@0] meson_uart c81004c0.serial: ttyS0 use xtal(8M) 24000000 change 0 to 115200
  483. [ 1.807996@2] console [ttyS0] enabled
  484. [ 1.812037@0] meson_uart c11084c0.serial: ==uart1 reg addr = ffffff800028a4c0
  485. [ 1.818690@0] c11084c0.serial: ttyS1 at MMIO 0xc11084c0 (irq = 58, base_baud = 1500000) is a meson_uart
  486. [ 1.828625@0] dwc_otg: usb0: type: 2 speed: 0, config: 0, dma: 0, id: 0, phy: d0078000, ctrl: 0
  487. [ 1.836609@0] dwc_otg_driver_probe host only, not probe usb_otg!!!
  488. [ 1.843054@0] hdmitx: system: hdmitx_hdcp_init
  489. [ 1.847617@0] aml_vrtc rtc.31: rtc core: registered aml_vrtc as rtc0
  490. [ 1.854056@0] secmon has 1 memory regions
  491. [ 1.857425@0] secmon: share in base: 0xffffff80002aa000, share out base: 0xffffff80002ac000
  492. [ 1.865694@0] secmon secmon.4: assigned reserved memory node linux,secmon ok
  493. [ 1.872668@0] secmon: probe done
  494. [ 1.876143@0] storage: storage in base: 0xffffff8001700000
  495. [ 1.881287@0] storage: storage out base: 0xffffff8001780000
  496. [ 1.886815@0] storage: storage block base: 0xffffff8001800000
  497. [ 1.892503@0] storage: probe done!
  498. [ 1.896297@0] aml_sd_emmc_probe: line 3594
  499. [ 1.899918@0] mmc driver version: 1.07, 2015-01-21: fix a bug in tuning which caused eMMC data CRC error
  500. [ 1.909668@0] aml_sd_emmc_reg_init 1149
  501. [ 1.913211@0] get property: ocr_avail, value:0x00200080
  502. [ 1.919583@0] get property: f_min, value:300000
  503. [ 1.925712@0] get property: f_max, value:100000000
  504. [ 1.932094@0] get property: max_req_size, value:0x00020000
  505. [ 1.938562@0] get property: pinname, str:emmc
  506. [ 1.944343@0] get property: card_type, value:1
  507. [ 1.950040@0] get property: gpio_dat3, str:
  508. [ 1.955468@0] get property: hw_reset, str:
  509. [ 1.960929@0] emmc:pdata->caps = c0000d47
  510. [ 1.964873@0] emmc:pdata->caps2 = 18060
  511. [ 1.968659@0] emmc:pdata->pm_caps = 0
  512. [ 1.972294@0] storage 1, boot 1
  513. [ 1.975385@0] get_storage_dev return 1
  514. [ 2.011514@0] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  515. [ 2.016978@0] aml_sd_emmc_probe: line 3594
  516. [ 2.017374@0] aml_sd_emmc_reg_init 1149
  517. [ 2.019645@0] get property: ocr_avail, value:0x00200080
  518. [ 2.026116@0] get property: f_min, value:400000
  519. [ 2.032226@0] get property: f_max, value:100000000
  520. [ 2.038531@0] get property: max_req_size, value:0x00020000
  521. [ 2.045003@0] get property: irq_in, value:3
  522. [ 2.050691@0] get property: irq_out, value:5
  523. [ 2.056475@0] get property: gpio_cd, str:
  524. [ 2.061824@0] get property: pinname, str:sd
  525. [ 2.067425@0] get property: jtag_pin, str:
  526. [ 2.072934@0] get property: card_type, value:5
  527. [ 2.078623@0] get property: gpio_dat3, str:
  528. [ 2.084075@0] sd:pdata->caps = 7
  529. [ 2.087246@0] sd:pdata->caps2 = 0
  530. [ 2.090524@0] sd:pdata->pm_caps = 0
  531. [ 2.101413@1] emmc: BKOPS_EN bit is not set
  532. [ 2.107678@1] emmc: trying cali 0-th time(s)
  533. [ 2.111429@1] emmc: delay[0]= 1400 padding= 3, bidx=1
  534. [ 2.111453@1] emmc: delay[1]= 1800 padding= 1, bidx=1
  535. [ 2.116332@1] emmc: delay[2]= 1400 padding= 3, bidx=1
  536. [ 2.121321@1] emmc: delay[3]= 1800 padding= 1, bidx=1
  537. [ 2.126331@1] emmc: delay[4]= 1800 padding= 1, bidx=1
  538. [ 2.131326@1] emmc: delay[5]= 1800 padding= 1, bidx=1
  539. [ 2.136334@1] emmc: delay[6]= 1800 padding= 1, bidx=1
  540. [ 2.141331@1] emmc: delay[7]= 1800 padding= 1, bidx=1
  541. [ 2.146338@1] emmc: calibration result @ 0: max(1800), min(1400)
  542. [ 2.151692@3] [aml_is_card_insert] card IN
  543. [ 2.156349@1] emmc: line_delay =0x202, max_cal_result =1800
  544. [ 2.161865@1] emmc: base_index_max 1, base_index_min 1
  545. [ 2.166958@1] emmc: clk 100000000 SDR mode tuning start
  546. [ 2.172447@1] emmc: rx_tuning_result[0] = 10
  547. [ 2.176650@1] emmc: rx_tuning_result[1] = 10
  548. [ 2.180878@1] emmc: rx_tuning_result[2] = 10
  549. [ 2.185107@1] emmc: rx_tuning_result[3] = 10
  550. [ 2.189327@1] emmc: rx_tuning_result[4] = 10
  551. [ 2.193560@1] emmc: rx_tuning_result[5] = 10
  552. [ 2.197808@1] emmc: rx_tuning_result[7] = 10
  553. [ 2.202012@1] emmc: rx_tuning_result[8] = 10
  554. [ 2.206232@1] emmc: rx_tuning_result[9] = 10
  555. [ 2.210159@1] emmc: best_win_start =7, best_win_size =9
  556. [ 2.215339@1] emmc: sd_emmc_regs->gclock=0x100024a,sd_emmc_regs->gadjust=0x12000
  557. [ 2.222670@1] emmc: gclock =0x100024a, gdelay=0x202, gadjust=0x12000
  558. [ 2.229109@1] emmc: support driver strength type 1
  559. [ 2.233807@1] emmc: try set sd/emmc to DDR mode
  560. [ 2.238192@1] emmc: try set sd/emmc to DDR mode
  561. [ 2.242814@1] emmc: new HS400 MMC card at address 0001
  562. [ 2.247764@1] emmc: clock 100000000, 8-bit-bus-width
  563.  
  564. [ 2.252947@3] normal card in
  565. [ 2.255822@2] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  566. [ 2.261651@2] aml_sd_emmc_probe: line 3594
  567. [ 2.261654@1] mmcblk0: emmc:0001 8WPD3R 7.28 GiB
  568. [ 2.270304@1] mmcblk0boot0: emmc:0001 8WPD3R partition 1 4.00 MiB
  569. [ 2.276468@2] aml_sd_emmc_reg_init 1149
  570. [ 2.276492@1] mmcblk0boot1: emmc:0001 8WPD3R partition 2 4.▒0 MiB
  571. [ 2.276624@1] mmcb▒k0rpmb: emmc:0001 8WPD3R partition 3 512 KiB
  572. [ 2.277584@1] mmcblk0: unknown partition table
  573. [ 2.278343@1] [mmc_read_partition_tbl] mmc read partition OK!
  574. [ 2.278345@1] add_emmc_partition
  575. [ 2.278614@1] [mmcblk0p01] bootloader offset 0x000000000000, size 0x000000400000
  576. [ 2.278757@1] [mmcblk0p02] reserved offset 0x000002400000, size 0x000004000000
  577. [ 2.278898@1] [mmcblk0p03] cache offset 0x000006c00000, size 0x000020000000
  578. [ 2.279027@1] [mmcblk0p04] env offset 0x000027400000, size 0x000000800000
  579. [ 2.279162@1] [mmcblk0p05] logo offset 0x000028400000, size 0x000002000000
  580. [ 2.279304@1] [mmcblk0p06] recovery offset 0x00002ac00000, size 0x000002000000
  581. [ 2.279435@1] [mmcblk0p07] rsv offset 0x00002d400000, size 0x000000800000
  582. [ 2.279576@1] [mmcblk0p08] tee offset 0x00002e400000, size 0x000000800000
  583. [ 2.279714@1] [mmcblk0p09] crypt offset 0x00002f400000, size 0x000002000000
  584. [ 2.279869@1] [mmcblk0p10] misc offset 0x000031c00000, size 0x000002000000
  585. [ 2.280000@1] [mmcblk0p11] boot offset 0x000034400000, size 0x000002000000
  586. [ 2.280132@1] [mmcblk0p12] system offset 0x000036c00000, size 0x000080000000
  587. [ 2.280289@1] [mmcblk0p13] data offset 0x0000b7400000, size 0x00011ac00000
  588. [ 2.280328@1] card key: card_blk_probe.
  589. [ 2.280333@1] emmc_key_init:527 emmc key lba_start:0x12020,lba_end:0x12220
  590. [ 2.280336@1] emmc key: emmc_key_init:552 ok.
  591. [ 2.283328@1] amlmmc_dtb_init: register dtb chardev
  592. [ 2.283328@1] calc 92d51a0d, store 92d51a0d
  593. [ 2.286044@1] calc 92d51a0d, store 92d51a0d
  594. [ 2.286048@1] total valid 2
  595. [ 2.286658@1] amlmmc_dtb_init: register dtb chardev OK
  596. [ 2.286659@1] Exit aml_emmc_partition_ops OK.
  597. [ 2.288791@1] mmcblk0boot1: unknown partition table
  598. [ 2.289765@1] mmcblk0boot0: unknown partition table
  599. [ 2.290022@1] clear_emmc_wait_flag
  600. [ 2.467599@2] get property: ocr_avail, value:0x00200080
  601. [ 2.474008@2] get property: f_min, value:400000
  602. [ 2.480121@2] get property: f_max, value:200000000
  603. [ 2.486510@2] get property: max_req_size, value:0x00020000
  604. [ 2.492981@2] get property: pinname, str:sdio
  605. [ 2.498752@2] get property: card_type, value:3
  606. [ 2.504489@2] sdio:pdata->caps = 7810f
  607. [ 2.508152@2] sdio:pdata->caps2 = 0
  608. [ 2.511609@2] sdio:pdata->pm_caps = 1
  609. [ 2.538354@1] sd: new high speed SDHC card at address aaaa
  610. [ 2.538387@1] sd: clock 50000000, 4-bit-bus-width
  611.  
  612. [ 2.543307@1] mmcblk1: sd:aaaa SL16G 14.8 GiB
  613. [ 2.551524@1] [aml_sd_emmc_probe] aml_sd_emmc_probe() success!
  614. [ 2.553356@2] mmcblk1: p1 p2
  615. [ 2.553723@1] ion_dev has 1 memory regions
  616. [ 2.557719@1] fb: osd_init_module
  617. [ 2.557849@1] fb: viu vsync irq: 35
  618. [ 2.557857@1] meson-fb has 1 memory regions
  619. [ 2.557899@1] meson-fb meson-fb.16: assigned reserved memory node linux,meson-fb ok
  620. [ 2.557916@1] fb: osd_probe vinfo:ffffffc001cbdc68
  621. [ 2.557921@1] fb: init fbdev bpp is:32
  622. [ 2.587565@1] fb: set osd0 reverse as NONE
  623. [ 2.631512@1] fb: osd probe OK
  624. [ 2.631743@1] ge2d: ge2d_init_module
  625. [ 2.632488@1] ge2d: ge2d_dev major:242
  626. [ 2.636520@1] ge2d: ge2d clock is 400 MHZ
  627. [ 2.640160@1] ge2d: ge2d: pdev=ffffffc00026f000, irq=182, rstc=0xffffffc064396e80, clk=ffffffc000225b00
  628. [ 2.649516@1] ge2d: mapped phy: 0xd0160000
  629. [ 2.653536@1] ge2d: ge2d start monitor
  630. [ 2.657287@2] ge2d: ge2d workqueue monitor start
  631. [ 2.662009@0] codec:Amlogic A/V streaming port init
  632. [ 2.668081@1] codec:get gate demux control ok ffffffc064671380
  633. [ 2.672434@1] codec:get gate parser_top control ok ffffffc064671400
  634. [ 2.678628@1] codec:get gate vpu_intr control ok ffffffc064671480
  635. [ 2.684672@1] codec:get gate vdec control ok ffffffc064671500
  636. [ 2.691116@1] codec:[tsync_pcr_init]init success.
  637. [ 2.695175@1] codec:amvideocap_probe,amvideocap
  638. [ 2.699499@1] codec:use cma buf.
  639. [ 2.704322@0] amvenc_avc_probe -- reserved memory config fail.
  640. [ 2.708468@0] amvenc_avc - cma memory pool size: 40 MB
  641. [ 2.713587@0] encode_wq_init.
  642. [ 2.716491@0] encode start monitor.
  643. [ 2.719997@2] encode workqueue monitor start.
  644. [ 2.721074@0] codec:vdec_request_irq ffffffc001630808, vsync
  645. [ 2.721309@0] codec:create_ge2d_work_queue video task ok
  646. [ 2.722075@1] rdma_register, rdma_table_addr ffffff80002f5000 rdma_table_addr_phy 74510000 reg_buf ffffffc063c10000
  647. [ 2.722079@1] rdma_register success, handle 3 table_size 32768
  648. [ 2.722081@1] video_rdma:rdma_init video rdma handle = 3.
  649. [ 2.722087@1] codec:used fix clk for vdec clk source!
  650. [ 2.722099@1] codec:register clk_set_setting cpu[33]
  651. [ 2.722961@0] DI: di_module_init ok.
  652. [ 2.722969@0] DI: di_module_init: major 237
  653. [ 2.723222@0] DI: di_probe
  654. [ 2.723421@0] deinterlace has 1 memory regions
  655. [ 2.723482@0] deinterlace deinterlace.26: assigned reserved memory node linux,di ok
  656. [ 2.723487@0] DI-di_probe: get flag_cma error.
  657. [ 2.723514@0] di_irq:78,timerc_irq:38
  658. [ 2.723663@0] rdma_register, rdma_table_addr ffffff8000563000 rdma_table_addr_phy 7450a000 reg_buf ffffffc064370000
  659. [ 2.723665@0] rdma_register success, handle 4 table_size 8192
  660. [ 2.723668@0] DI: di_probe allocate rdma channel 4.
  661. [ 2.723671@0] DI: DI hw version 2.
  662. [ 2.723684@0] 0x000000db:Y=db,U=0,V=0
  663. [ 2.723686@0] 0x000000dc:Y=dc,U=0,V=0
  664. [ 2.723688@0] 0x000000dd:Y=dd,U=0,V=0
  665. [ 2.723689@0] 0x000000de:Y=de,U=0,V=0
  666. [ 2.723691@0] 0x000000df:Y=df,U=0,V=0
  667. [ 2.723693@0] 0x000000e0:Y=e0,U=0,V=0
  668. [ 2.723695@0] 0x000000e1:Y=e1,U=0,V=0
  669. [ 2.723697@0] 0x000000e2:Y=e2,U=0,V=0
  670. [ 2.723698@0] 0x000000e3:Y=e3,U=0,V=0
  671. [ 2.723700@0] 0x000000f0:Y=f0,U=0,V=0
  672. [ 2.723704@0] 0x000000f1:Y=f1,U=0,V=0
  673. [ 2.723706@0] 0x000000f2:Y=f2,U=0,V=0
  674. [ 2.723708@0] 0x000000f3:Y=f3,U=0,V=0
  675. [ 2.723709@0] 0x000000f4:Y=f4,U=0,V=0
  676. [ 2.723711@0] 0x000000f5:Y=f5,U=0,V=0
  677. [ 2.723713@0] 0x000000f6:Y=f6,U=0,V=0
  678. [ 2.723716@0] 0x000000f7:Y=f7,U=0,V=0
  679. [ 2.723718@0] 0x000000f8:Y=f8,U=0,V=0
  680. [ 2.723720@0] 0x000000f9:Y=f9,U=0,V=0
  681. [ 2.723722@0] 0x000000fa:Y=fa,U=0,V=0
  682. [ 2.723724@0] 0x000000fb:Y=fb,U=0,V=0
  683. [ 2.723725@0] 0x000000fc:Y=fc,U=0,V=0
  684. [ 2.723875@0] DI: di_probe here.
  685. [ 2.724278@0] efusekeynum: 4
  686. [ 2.724288@0] efusekeyname: mac offset: 0 size: 6
  687. [ 2.724294@0] efusekeyname: mac_bt offset: 6 size: 6
  688. [ 2.724299@0] efusekeyname: mac_wifi offset: 12 size: 6
  689. [ 2.724305@0] efusekeyname: usid offset: 18 size: 16
  690. [ 2.724611@0] efuse efuse.10: probe OK!
  691. [ 2.724969@0] key unify config unifykey-num is 14
  692. [ 2.725018@0] key unify fact unifykey-num is 14
  693. [ 2.725023@0] aml_unifykeys_probe:1273=============unifykey_devno:eb00000
  694. [ 2.725277@0] 6unifykey: device unifykeys created ok
  695. [ 2.725398@0] 6aml_unifykeys_init done!
  696. [ 2.725400@0] PPMGRDRV: warn: ppmgr module init func called
  697. [ 2.725508@0] PPMGRDRV: err: ppmgr_driver_probe called
  698. [ 2.725512@0] ppmgr has 1 memory regions
  699. [ 2.725554@0] PPMGRDRV: info: ppmgr_dev major:234
  700. [ 2.725841@0] PPMGRDRV: info: ppmgr_probe done
  701. [ 2.726195@0] amlogic rfkill init
  702. [ 2.726271@0] enter bt_probe of_node
  703. [ 2.726293@0] not get gpio_en
  704. [ 3.141730@0] power on valid level is high
  705. [ 3.141730@0] audio_dsp: [dsp]register dsp to char divece(257)
  706. [ 3.146669@0] amaudio: amaudio: driver amaudio succuess!
  707. [ 3.151241@0] amlvid:err: amlvideo_init called
  708. [ 3.155492@0] amlvid:err: amlvideo_create_instance called
  709. [ 3.161008@0] amlvid:err: v4l2_dev.name=:amlvideo-000
  710. [ 3.166172@0] amlvideo-000: V4L2 device registered as video10
  711. [ 3.172099@0] [RX]-hdmirx: hdmirx_init.
  712. [ 3.175478@0] ESM HLD: Initializing...
  713. [ 3.179186@0] ESM HLD: Registering device range 'esm_rx'...
  714. [ 3.184748@0] ESM HLD: Device range 'esm_rx' has been registered.
  715. [ 3.190743@0] ESM HLD: Creating class /sys/class/elliptic_rx...
  716. [ 3.196696@0] ESM HLD: The class /sys/class/elliptic_rx has been created.
  717. [ 3.203345@0] ESM HLD: Creating device 'esm_rx'...
  718. [ 3.208266@0] ESM HLD: Device 'esm_rx' has been created.
  719. [ 3.213354@0] ESM HLD: Done initializing the HLD driver.
  720. [ 3.218602@0] module init
  721. [ 3.221333@0]
  722. [ 3.221333@0] VECM probe start
  723. [ 3.226263@0] aml_vecm_probe: ok
  724. [ 3.229676@0] saradc c1108680.saradc: initialized by kernel, clk_div=20
  725. [ 3.235708@0] saradc c1108680.saradc: calibration start:
  726. [ 3.241010@0] saradc c1108680.saradc: nominal=0, value=3
  727. [ 3.246289@0] saradc c1108680.saradc: nominal=256, value=264
  728. [ 3.251889@0] saradc c1108680.saradc: nominal=512, value=526
  729. [ 3.257488@0] saradc c1108680.saradc: nominal=768, value=788
  730. [ 3.263102@0] saradc c1108680.saradc: nominal=1023, value=1023
  731. [ 3.268801@0] saradc c1108680.saradc: calibration end: coef=4002
  732. [ 3.274995@3] remote: Driver init
  733. [ 3.278109@3] remote: platform_data g_remote_ao_offset=580
  734. [ 3.283474@3] remote: platform_data irq =228
  735. [ 3.287712@3] remote: set drvdata completed
  736. [ 3.291928@3] remote: device_create_file completed
  737. [ 3.297157@3] input: aml_keypad as /devices/meson-remote.12/input/input0
  738. [ 3.303820@3] remote: input_register_device completed
  739. [ 3.308697@3] remote: set_remote_mode[74]
  740. [ 3.312672@3] remote: remote config major:231
  741. [ 3.317233@3] remote: physical address:0x63cdc000
  742. [ 3.322078@0] gpio-key gpio_keypad.47: gpio_key: 0 name(power) pin()
  743. [ 3.327969@0] gpio-key gpio_keypad.47: amlogic_gpio_name_map_num pin 0!::
  744. [ 3.334728@0] gpio-key gpio_keypad.47: gpio_key: 0 power(147)
  745. [ 3.340435@0] gpio-key gpio_keypad.47: start setup_timer
  746. [ 3.345662@0] gpio-key gpio_keypad.47: power key(116) registed.
  747. [ 3.351742@0] input: gpio_keypad as /devices/gpio_keypad.47/input/input1
  748. [ 3.358318@0] gpio-key gpio_keypad.47: gpio keypad register input device completed.
  749. [ 3.365790@0] input input1: gpio keypad major:230
  750. [ 3.370744@0] cpuinfo: probe done
  751. [ 3.374535@0] input: cec_input as /devices/virtual/input/input2
  752. [ 3.379788@0] cectx aocec: aml_cec_probe(): no hdmirx reg resource
  753. [ 3.385689@0] cectx aocec: aml_cec_probe(): no hhi reg resource
  754. [ 3.391622@0] cectx aocec: aml_cec_probe(): can't find hdmirx
  755. [ 3.398381@0] cec: wake up flag:0
  756. [ 3.402095@0] aml_codec_T9015 c8832000.t9015: aml_T9015_audio_codec_probe
  757. [ 3.408934@0] aml_pcm_dai: pcm mode detection =1
  758. [ 3.441529@0] input input1: key 116 up
  759. [ 3.621707@2] aml_snd_card: headphone detection disable=1
  760. [ 3.622099@2] aml_snd_m8_card aml_m8_snd.46: T9015-audio-hifi <-> I2S.39 mapping ok
  761. [ 3.629428@2] aml_snd_m8_card aml_m8_snd.46: dit-hifi <-> SPDIF.40 mapping ok
  762. [ 3.636211@2] aml_pcm: enter aml_pcm_new dai->name: PCM.41 dai->id: 0
  763. [ 3.642617@2] aml_snd_m8_card aml_m8_snd.46: pcm2bt-pcm <-> PCM.41 mapping ok
  764. [ 3.649602@2] aml_snd_m8_card aml_m8_snd.46: ASoC: no source widget found for LOUTL
  765. [ 3.657192@2] aml_snd_m8_card aml_m8_snd.46: ASoC: Failed to add route LOUTL -> direct -> Ext Spk
  766. [ 3.665981@2] aml_snd_m8_card aml_m8_snd.46: ASoC: no source widget found for LOUTR
  767. [ 3.673568@2] aml_snd_m8_card aml_m8_snd.46: ASoC: Failed to add route LOUTR -> direct -> Ext Spk
  768. [ 3.791524@0] aml_snd_card: audio use jtag pinmux as i2s output, read val =0
  769. [ 3.793486@0] TCP: cubic registered
  770. [ 3.796952@0] NET: Registered protocol family 10
  771. [ 3.801767@0] NET: Registered protocol family 17
  772. [ 3.805577@0] Key type dns_resolver registered
  773. [ 3.811451@0] Registering SWP/SWPB emulation handler
  774. [ 3.815803@0] regulator-dummy: disabling
  775. [ 4.520433@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  776. [ 4.520483@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  777. [ 4.528617@0] xhci-hcd xhci-hcd.0.auto: irq 62, io mem 0xc9000000
  778. [ 4.534409@0] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  779. [ 4.541162@0] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  780. [ 4.548507@0] usb usb1: Product: xHCI Host Controller
  781. [ 4.553504@0] usb usb1: Manufacturer: Linux 3.14.29 xhci-hcd
  782. [ 4.559101@0] usb usb1: SerialNumber: xhci-hcd.0.auto
  783. [ 4.564648@0] hub 1-0:1.0: USB hub found
  784. [ 4.568004@0] hub 1-0:1.0: 2 ports detected
  785. [ 4.572327@0] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  786. [ 4.577737@0] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  787. [ 4.585618@0] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
  788. [ 4.592405@0] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  789. [ 4.599725@0] usb usb2: Product: xHCI Host Controller
  790. [ 4.604736@0] usb usb2: Manufacturer: Linux 3.14.29 xhci-hcd
  791. [ 4.610333@0] usb usb2: SerialNumber: xhci-hcd.0.auto
  792. [ 4.615859@0] hub 2-0:1.0: USB hub found
  793. [ 4.619235@0] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
  794. [ 4.626918@2] console [netcon0] enabled
  795. [ 4.630255@2] netconsole: network logging started
  796. [ 4.634953@2] aml_vrtc rtc.31: setting system clock to 2015-01-01 00:00:07 UTC (1420070407)
  797. [ 4.644049@2] cpufreq-scpi cpufreq-meson.7: enter cpufreq
  798. [ 4.648652@2] cpufreq-scpi cpufreq-meson.7: probe cpufreq okay
  799. [ 4.655055@2] gxbb_pm: enter meson_pm_probe!
  800. [ 4.658747@2] gxbb_pm: meson_pm_probe done
  801. [ 4.663485@0] cpucore_cooling_register, max_cpu_core_num:4
  802. [ 4.684980@0] aml_istbt_dev_ready NULL
  803. [ 4.685038@0] ALSA device list:
  804. [ 4.686214@0] #0: AML-M8AUDIO
  805. [ 4.689784@0] Freeing unused kernel memory: 1092K (ffffffc001b38000 - ffffffc001c49000)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!