Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- XplorerGLX Simulator
- MS Sans Serif
- Menu 1
- Menu 2
- Menu 3
- Menu 4
- Enter
- Cancel
- Start/Stop Sampling
- Home
- Note
- Copy Screen
- Sensor Data
- No PASPORT Connections
- Virtual Motion Sensor
- Upgrade Firmware
- Upgrade Core
- Mirror GLX Screen and Buttons
- Upgrade Pwr Mgr
- Verify after upgrading
- Firmware Upgrades
- Refresh File View
- GLX Hardware Detected
- Press ESC, HOME, then 1 on the GLX (one after the other) to enable GLX firmware upgrades
- GLX File System Viewer
- Show GLX Utilities
- Load Datasheets
- Show Large Screen
- About Xplorer GLX Simulation
- MS Sans Serif
- Copyright (C) 2003-2005 PASCO scientific
- A simulation of the Xplorer GLX that can collect data from connected pasport sensors Also provides utility functions for a connected real GLX
- GLX Simulator Print
- MS Sans Serif
- Copy To Clipboard
- Send To Windows Printer
- Download file to disk
- Upload file to GLX
- Delete
- Manufacturer ID
- Undefined
- Fraunhofer
- S3
- Diamond Multimedia
- Casio Computer Co, LTD
- Viona Development GmbH
- Frontier Design Group LLC
- Gadget Labs LLC
- Connectix Corporation
- Vienna Systems
- Voice Information Systems, Inc
- Chromatic Research, Inc
- Crystal Net Corporation
- Precept Software, Inc
- EuPhonics
- Danka Data Devices
- Norris Communications, Inc
- Softsound, Ltd
- CANAM Computers
- Core Dynamics
- AMD
- Electronic Courseware Systems, Inc
- Spectrum Signal Processing, Inc
- AL Digital Ltd
- SounDesignS MCS Ltd
- Mediatrix Peripherals
- Osprey Technologies, Inc
- AT&T Microelectronics
- PictureTel Corporation
- Seer Systems, Inc
- Digital Audio Labs, Inc
- TDK Corporation
- Quarterdeck Corporation
- Splash Studios
- Crystal Semiconductor Corporation
- Kay Elemetrics, Inc
- Gulbransen, Inc
- DiAcoustics, Inc
- OKSORI Co, Ltd
- NVidia Corporation
- FAST Multimedia
- AGENSONIQ Corporation
- Brooktree Corporation
- Rhetorex Inc
- Wildcat Canyon Software
- ADDX
- Grande Software
- APICOM
- Northern Telecom Limited
- Voxware Inc
- Opcode Systems
- Rockwell International
- Radius
- Voice Technologies Group, Inc
- Computer Concepts Ltd
- Horizons Technology, Inc
- ISOLUTION BV
- Cirrus Logic
- miro Computer Products AG
- Ositech Communications Inc
- Workbit Corporation
- Mark of the Unicorn
- Digital Equipment Corporation
- Apple Computer, Inc
- Quanta Computer Inc
- Lernout & Hauspie
- Weitek
- MP Technologies, Inc
- InSoft, Inc
- Dialogic Corporation
- Compaq Computer Corp
- Adlib Accessories Inc
- OPTi Computers Inc
- CompusicLyrrus Inc
- Natural MicroSystems
- New Media Corporation
- Xebec Multimedia Solutions Limited
- Control Resources Limited
- Matsushita Electric Industrial Co, LTD
- I/O Magic Corporation
- Ing C Olivetti & C, SpA
- AuraVision Corporation
- OKI
- Dolby Laboratories
- Ahead, Inc
- Speech Compression
- Supermac
- Silicon Soft, Inc
- MOSCOM Corporation
- Vitec Multimedia
- Sonic Foundry
- Willow Pond Corporation
- AST Research Inc
- EXANNCR Corporation
- Winnov, Inc
- Logitech, Inc
- Metheus
- Iterated Systems, Inc
- Integrated Circuit Systems, Inc
- Audio Processing Technology
- Korg Inc
- SCALACS
- VideologicAztech Labs, Inc
- Truevision
- Seiko Epson Corporation
- Canopus, co, Ltd
- Motorola, Inc
- Audio, Inc
- ESS Technology
- Computer Friends, Inc
- microEngineering Labs
- DSP Group, Inc
- APPS Software International
- Computer Aided Technologies
- Sierra Semiconductor Corp
- Echo Speech Corporation
- Everex Systems, Inc
- Yamaha Corporation of America
- InterActive Inc
- Video Associates Labs, Inc
- Advanced Gravis
- Intel Corporation
- ICL Personal Systems
- Antex Electronics Corporation
- VoyetraTandy Corporation
- Wang Laboratories, Inc
- ATINEC
- DSP Solutions, Inc
- RolandVocaltec LTD
- IBM Corporation
- Turtle Beach, Inc
- Artisoft, Inc
- Fujitsu CorpMedia Vision, Inc
- Creative Labs, Inc
- Microsoft Corporation
- 44.1 kHz, Stereo, 16-bit
- 44.1 kHz, Stereo, 8-bit
- 44.1 kHz, Mono, 16-bit
- 44.1 kHz, Mono, 8-bit
- 22.05 kHz, Stereo, 16-bit
- 22.05 kHz, Stereo, 8-bit
- 22.05 kHz, Mono, 16-bit
- 22.05 kHz, Mono, 8-bit
- 11.025 kHz, Stereo, 16-bit
- 11.025 kHz, Stereo, 8-bit
- 11.025 kHz, Mono, 16-bit
- 11.025 kHz, Mono, 8-bit
- Returns sample-accurate position information
- Supports volume control
- The driver is synchronous and will block while playing a buffer
- Supports playback rate control
- Supports pitch control
- Supports separate left and right volume control
- PASPORT Connections
- Connected PASPORT Sensors
- C:\Program Files\DataStudio\Plugins\DataSheets\USBLink.hex
- GLX Hardware Detected (Boot Mode)
- GLX Versions: Firmware %d.%02d, Core %d.%02d, Pwr Mgr %d.%02d
- GLX Root
- Datasheets
- Path
- Software\PASCO Scientific\DataStudio\PluginsSensors\
- Path
- Software\PASCO Scientific\Common\Firmware\
- Failed to restart GLX %s (%s:%d)%s (%s:%d)%s
- Exception thrown in destructor
- c:\Program Files\Microsoft Visual Studio 9.0\VC\atlmfc\include\afxwin1.inlh Error creating mutex
- c:\Excretion.log
- (const unsigned char *)0 };
- bm_%d_%d,
- const unsigned char *bitmaps[] = {0x00, 0x00 };
- 0x%02x, 0x%02x, 0x%02x, 0x%02x, 0x%02x, 0x%02x, 0x%02x, 0x%02x, 0x%02x, 0x%02x, 0x%02x, 0x%02x, 0x%02x, // id, lang, bpp, xsize, ysize
- const unsigned char bm_%d_%d[] = {
- Cannot open bitmap file. Is it checked out?
- Firmware\XcursionBitmaps.cpp
- Upgrading %s to version %d.%02d ... %d%%
- Xplorer GLX Simulator Print
- Firmware upgrade complete. Restarting GLX...
- Could not write the GLX MSP430 firmware.
- GLX is not in MSP430 boot mode.
- Could not get MSP430 version response.
- Could not request the MSP430 version.
- glxmsp430.srec
- Power Manager
- Could not write the GLX firmware to flash
- glx.srec
- Firmware
- Could not write the GLX FPGA config to flash.
- glxfpga.rbf
- Core
- Extended boot loader is not running
- Could not get extended boot loader firmware version.
- Could not write and execute the GLX extended boot loader file
- Invalid data in firmware file:
- Could not read firmware file:
- glxbootx.srec
- Could not get the current bootloader firmware version
- Restarting GLX in boot mode...
- Could not get the current firmware version (1).
- \Plugins\Datasheets\
- Are you sure you want to upgrade the GLX firmware?
- vector<T> too long\\\
- Could not open GLX src file
- Could not open Windows dest file
- Download complete
- Could not get file info
- bad file size
- There was an error getting file data from the GLX
- Downloading file %s from GLX: %d%% complete
- File Exists! Overwrite?
- Could not extract filename from path
- Could not open GLX dest file
- Could not open Windows src file
- Upload complete
- There was an error writing file data to the GLX
- Uploading file %s to GLX: %d%% complete.
- glx
- Could not open GLX dir file
- Could not get dir file info
- Can only save to a GLX directory...
- *Datasheet upload complete. Restarting GLX...
- Uploaded %d datasheets with %d errors.
- Error writing datasheet file to FLASH
- Uploading datasheet: rb
- CISensorsensor.swr
- CISensors_enu
- DefaultUILanguage
- Software\PASCO Scientific\DataStudio\LanguagesCISensors_enu.swrdatasheet.lang
- *.sds\datasheet.lang\\__flash\datasheets
- Bulk read failed, %s, read %d of %d
- Failed to set time outs for bulk read, %s
- Write error: %sFailed to set write timeout: %s
- Read Error: timeout %s
- Read Error: %s, read %d of %d
- Failed to set read timeout: %s
- Failed to clear Rx buffer: %s
- Command Error: Leftover bytes after response = %d
- Command Error: Leftover bytes before command = %d
- Failed to open %s: %s(%d)
- \\.\Software\PASCO Scientific\DataStudio\AirLinkPort
- Unimplemented vendor request: 0x%02x
- AirLink
- Unimplemented io control: 0x%04x%s%c%s%d
- \\.\psusb-
- Early pilot-run PASPORT sensor datasheet error.
- Failed to parse the sensor data sheet.
- Failed to read the sensor data sheet.
- Read invalid sensor id: 0x%04x
- Read invalid maximum datasheet size: 0x%04x
- Read invalid extended datasheet size: 0x%04x
- Read invalid datasheet size: 0x%04x
- Failed to read the sensor id and data sheet size.
- Success!
- Program
- Erasing
- \versions.txt
- Busy Signal
- Ring Back
- Dial Tone
- C\rundata\RunS%dM%dR%d
- Failed to open run file '%s'
- False
- True
- DebugLog.glx
- Cache Flush Failed! sector %d
- __fat32
- __FAT16
- FAT32
- NO NAME
- __ram
- Recovered %d file system sectors
- RAM
- temp\%08x%04x.tmp
- __flash
- Flash
- \glxBootx.srec
- \glx.srec
- \glxFpga.rbf
- \glxMsp430.srec
- Simulated jump to extended boot loader
- \GLXFirmware
- Load Firmware File
- USRSGSFSESCSUBEMCANETBSYNNAKDC4DC3DC2DC1DLESISOCRFFVTLFTABBSBELACKENQEOTETXSTXSOHNULL
- Could not read MSP430 Info Memory
- Invalid Info Memory Signature
- Could not write MSP430 Info Memory signature
- MSP430 Info Memory is not blank
- Could not write MSP430 Info Memory for default contrast
- Could not erase the MSP430 Info Memory
- Could not write MSP430 Info Memory for default language
- Unknown License ID %d
- Could not write MSP430 Info Memory for license removal
- STOP! This will irrevocably remove product licenses from the GLX. This should only be done for PASCO testing purposes!
- %s : %dGLX Licenses available
- None
- %s GLX Licenses taken
- usbCount:%04d usbMax:%03d usbAvg:%03d isrAvgBetween:%04d isrAvg:%03d isrAvgAudio:%03d isrMaxBetween:%04d isrMax:%03d isrMaxAudio:%03d
- Wake Up in %d seconds...
- Shutting Down...
- GLXFileSysArchive.dat
- rb
- wb
- \backup\
- RAM File system is corrupt: Reformatting...
- \temp
- Restoring File System from Archive File...
- Formatting Ram File System...
- Battery Manager did not initialize properly...
- License Manager did not initialize properly...
- %s: %s %s %s%s=%d.%02d
- BootMgr
- PwrMgr
- Core=%d.%02d
- Firmware=%d.%02d
- EMPTY
- \GLXBackup\Default
- Datasheet file '%s' copy failed.
- lang
- Update Datasheets
- Updating Datasheets
- \GLXBackup\Default\
- Could not find file system for the datasheet update
- wb
- Could not find extended bootloader '%s'
- Firmware Upgrade
- Loading Extended Boot Loader...
- \AutoRestore
- Could not load GLX firmware '%s'
- Could not load FPGA core '%s'
- Could not load Power Manager firmware '%s'
- Could not load extended bootloader '%s'
- \rundata
- Shutdown Information
- Reason: %s
- Date/Time: %s
- Battery Level: %d%%
- Final Voltage Level: %d(%d) mV
- Voltage History: %s
- Experiment Dirty: %s
- Experiment Saved: %s%d/%d/%02d @ %d:%02d:%02d
- No saved power down info found
- Unknown
- User powered down
- Unit was idle
- Battery was low
- Immediate Shutdown
- Terminated Simulator Thread
- Simulate Sleep Mode: %s
- Off
- On
- Debug
- Log cache successfully dumped to file.
- Error 2! Erase %08x Error 1! Write %08x
- This test will erase the contents of your flash filesystem. Would you like to continue?
- Failed to store factory default contrast (%d)
- esc,5,8 - Simulate connection to remote filesys
- esc,6,2 - Toggle ISR Stats
- esc,9,9,9 - Reset max idle timer
- esc,.,=,+ - Toggle audio debug mode
- esc,.,=,- - Record/Play an audio file
- esc,2,6 - Show supported CI Sensors
- esc,3,1 - Test Window for factory tests
- esc,5,0 - Show USB device tree
- esc,5,1 - Show flash FS sector map
- esc,5,2 - Destructive flash FS erase test
- esc,5,4 - Dump the debug log cache to a file
- esc,5,5 - Sleep for 5 seconds
- esc,5,6 - Toggle simulated sleep mode
- esc,5,7 - Simulate connection to USB disk
- esc,0,0 - Powerdown info screen
- esc,0,1 - Battery manager debug screen
- esc,1,0 - Status bar normal mode
- esc,1,2 - Status bar debug mode 2
- esc,2,1 - Show data file tree
- esc,2,2 - Font debug screen
- esc,2,3 - Show licenses
- esc,2,4 - Simulate Auto Shutdown
- esc,2,5 - Simulate Low Battery Shutdown
- Simulated auto shut down.
- Press OK to go back to simulator.
- %s(%d)
- Recovered
- An unsaved experiment snapshot was found. Would you like to recover the experiment?
- Analog
- Digital
- Datafiler
- xxx
- Select
- media source tray is invalid.
- papersize illegal for given hardware.
- device only support 3 sided full-bleed on photo paper.
- device only support full-bleed on photo paper.
- full bleed on only 3 sides.device does not support full-bleed printing.
- sensor says color, photo, and black pens below threshold.
- sensor says color, photo, and grey pens below threshold.
- sensor says color and grey pens below threshold.
- sensor says grey and photo pens below threshold.
- sensor says color and photo pens below threshold.
- sensor says black and photo pens below threshold.
- sensor says grey pen below threshold.
- sensor says photo pen below threshold.
- sensor says color pen below threshold.
- sensor says black pen below threshold.
- sensor says pens below threshold.
- duplexer installed; our driver can't use it.
- printmode selection incompatible with pen, tray, etc.
- continue from blocked state for printers with no buttons.
- bad or garbled device id from printer.
- I/O error communicating with printer.
- inputwidth exceeds outputwidth, can't shrink output.
- inputwidth exceeds printable width.
- inputwidth is 0 and.
- bad selection for PerformPrinterFunction.
- bad (x,y) passed to TextOut.
- font selection failed.
- no graphics allowed in current build.
- no text allowed in current build, UsePageWidth is false.
- selected pen-type unsupported.
- selected printer-type unsupported in build.
- supplied ptr was null.
- tried to set resolution at unacceptable value.
- what it says.
- indicates improper calling sequence or unidi.
- failed to allocate memory.
- something bad that should not have happened.
- CANCEL chosen by user.
- Unknown Driver Error
- Everything OK
- Simulator Printer
- Requested media size and the phototray status do not match. Engage or disengage phototray based on the requested paper.
- Paper is jammed in your printer. Cancel the print job and clear the paper jam.
- The printer is out of paper. Insert the paper into paper tray and continue.
- Cannot properly identify the printer.
- Cannot communicate with the printer.
- This printer is not supported.
- Photo print cartridges are not supported. Cancel the print job and insert the correct print cartridges.
- The print cartridges are either missing or installed incorrectly. Check the printer cartridges and push the resume button on the printer.
- The black print cartridge is either missing or installed incorrectly. Check the printer cartridge and push the resume button on the printer.
- The color print cartridge is either missing or installed incorrectly. Check the printer cartridge and push the resume button on the printer.
- The print cartridge is either missing or installed incorrectly. Check the printer cartridge and push the resume button on the printer.
- No printer was found. Check to make sure your printer is connected properly and that the power is on. Then push the resume button on the printer to continue printing.
- The printer is in an error condition. Cancel the job, check your printer, and try to print again.
- The top cover of your printer is open. Close the top cover to resume printing
- The printer is out of paper. Insert paper into the paper tray, and push the resume button on the printer.
- Printer Busy.
- Your printer has gone offline due to an error. Cancel the job, check the printer, and try again.
- Printing Canceled.
- Printing Complete.
- Currently Printing.
- Printing Status
- Printer Setup
- Unable to Print:
- Waiting:
- No printer, see Notes pages.
- Press F1 to start: %s
- Printing To: %s;
- Supported Printers : Experiment: %s
- Print All
- Print
- Are you sure you want to delete all the text?
- Are you sure you want to delete the audio note for this note?
- Vol +
- Vol -
- Delete Text
- Record Level
- Record Quality
- Delete Audio Note
- Record Audio Note
- Text
- Audio Note
- Note Editor
- <Audio Only>
- <Empty>
- Are you sure you want to delete this note?
- Delete Note
- Play Audio Note
- Stop Audio Note
- Always Show Text
- Edit Note...
- Are you sure you want to delete all notes for this run?
- Del All Notes
- Show All Text
- Hide All Text
- Two notes cannot occupy the same data point.
- Please display and position data cursor first, then insert note.
- pixels
- Milliseconds
- Microseconds
- nm
- The GLX firmware upgrade is complete. Please wait until the sensor list is uploaded before disconnecting the GLX.
- bytes
- Automatic
- bits
- Are you sure you want to delete all data runs from this experiment?
- Delete All Runs...
- Available memory is too low to continue collecting data. Please delete some RAM files or download them before collecting more data.
- Connected
- File system is valid.
- Version
- The GLX is currently charging and will not shut down. It will shut down automatically after charging is complete, or after A/C power is disconnected.
- Charging GLX
- The battery has reached a critical level and the GLX will shut down in %d seconds. All work will be saved to an Auto Shut-Down file and can be recovered on restart. To prevent any potential loss of data, connect the GLX to its A/C power supply as soon as possible. Press OK (F1) to shut down now.
- The GLX will automatically shut down in %d seconds. Press Cancel (F2) to cancel the shut down. Press OK (F1) to shut down now.
- GLX Auto Shut Down
- Rename Selected Run
- Rename Run...
- Under Construction
- Cancel
- OK
- Keyboard Data
- Are you sure you want to delete this run?
- Delete Run...
- More...
- Run #%d
- Data %d(%ls)
- You must have a sensor connected to start sampling.
- hours
- minutes
- seconds
- samples/s
- Statistics
- MSEY Int.
- Slope
- Avg
- No Data
- Saving...
- Save File
- PM
- AM
- Reset
- Stop
- Elapsed Time
- Zero |Value| <
- EE for Exponent >=
- EE for Exponent <=
- Number Of Digits
- Engineering Notation
- Scientific Notation
- Significant Figures
- Fixed Decimals
- Numeric Style
- Measurement Unit
- Measurement Name
- Data Properties...
- Data Properties
- Start
- Custom Step Multiply...
- Custom Step...
- Negative
- Positive
- Wave Polarity
- One Shot
- Repeat Mode
- Period (s)
- Frequency (Hz)
- Period Units
- Offset (V)
- Voltage (V)
- Amplitude ( V)
- DC Voltage
- Power Amplifier Output Settings
- Speaker Configuration
- Output Device
- Volume
- Phase (Deg)
- Freq. (Hz)
- Waveform
- Step
- Right Output Channel
- Left Output Channel
- Output Settings
- Ramp
- Sine
- Full
- Mono
- Stereo
- %s is invalid. The valid range is %s to %s
- Destination is write-protected.
- Waiting for device to be ready...
- No media present in device...
- Building experiment list...
- Failed to back up all files.
- There is already backup data on the backup drive. Would you like to overwrite it?
- Could not find a FAT16 or FAT32 filesystem on this USB storage device.
- Successful Firmware Upgrade
- The firmware upgrade will delete all GLX experiment files and settings. Would you like to back up the contents of the GLX to the flash drive?
- GLX battery must be fully charged or GLX must be connected to its external power supply while upgrading firmware. (%d)
- Failed to restore all files.
- A GLX Backup was found on the USB storage device. Would you like to restore this GLX?
- This operation will overwrite all data and settings on this GLX. Are you sure you want to continue?
- No GLX backup was found on this USB storage.
- Restoring entire GLX from USB storage...
- Backing up entire GLX to USB storage...Restore GLXBackup GLX
- Copying Files...
- Copying File...
- Moving Files...
- Moving File...
- [Modified]
- Auto Shut-Down
- An error occurred moving the file '%s'.
- An error occurred copying the file '%s'.
- An error occurred saving the file '%s'.
- An error occurred opening the file '%s'.
- Select a folder to copy the GLX experiment files to.
- '%ls' is not a valid GLX experiment file!
- Copy from Disk [Simulator]
- Copy to Disk [Simulator]
- Save changes to the file '%s'?
- %ls (%d)
- Untitled
- Rename
- Move All Files
- Copy All Files
- Move File
- Copy File
- Save As...
- New File
- Select a destination to copy the files to.
- Select a destination to copy the file to.
- Select a destination to move the files to.
- Select a destination to move the file to.Enter a name for the file.
- Opening the selected file...
- Delete ALL of the files in '%ls'?
- Delete the selected file?
- Summarizing the selected file...
- Summarizing the current experiment...
- [Open]
- Saving the current experiment...
- Files
- Delete All
- Delete
- New
- Save
- Open
- %ls: Size = %ls, Free = %ls
- A file with the name '%ls' already exists.
- [Not Saved]
- Replace the file named '%ls' in the destination?
- Copy (%d) of %ls
- Copy of %ls
- Delete the selected item?
- %d KB
- %s MB
- Relay Control
- Logic State
- Digital Input
- Rotary Motion Sensor
- Motion Sensor
- Velocity %d
- Pulse Count
- Count Time Interval
- Pulses
- Velocity Between Gates
- Velocity In Gate
- Initial Velocity
- Photogate Spacing
- Time Between Gates
- Time In Gate
- Pendulum Width
- Time Of Fall
- Flag Length
- Height Of Fall
- degrad/s/srad/srad
- Spoke Angle Spacing
- Spoke Arc Length
- Band Spacing
- Photogate Timing
- Time Of Flight
- Collision Timer
- Recordable Timer
- General Counting
- Photogate and Pendulum
- Smart Pulley (Linear)
- Smart Pulley (Rotational)
- Free Fall Adapter
- Photogate and Picket Fence
- Do you want to delete this timer and all of its data?
- Connect a timing device or press F1.
- Add
- Read Pt 2
- Read Pt 1
- Pt 2 (%s)
- Pt 1 (%s)
- 1 Point Offset
- 1 Point Slope
- 2 Point
- Calibration Type
- Calibrate all similar measurements.
- Calibrate selected measurement only.
- Calibrate Sensors
- Zero Sensor Now
- Zero Automatically On Start
- Sound Level
- High (100X)
- Medium (10X)
- Low (1X)
- Sensitivity
- Low
- High
- Resolution
- Properties
- Burst
- Visible
- Lg. Pulley (O-Ring)
- Lg. Pulley (Groove)
- Med. Pulley (Groove)
- Sm. Pulley (Groove)
- Rack
- Linear Position Scale
- Smart
- Mode
- 50 Points
- 20 Points
- 10 Points
- 5 Points
- 2 Points
- Reduce/Smooth Averaging
- Sample Rate Unit
- Do you want to delete this sensor and all of its data?
- Connect a sensor.
- Sound Sensor
- Audio Notes
- Microphone
- Calibrate...
- Remove
- Add...
- Pages: %d
- Pg. %ls of %ls
- Page %ls
- Delete Page
- New Page
- Caps Lock
- Shift
- Upgrade GLX Firmware
- This GLX does not support automatic battery disconnect. Please remove the GLX battery for long term storage.
- This operation will delete all GLX experiment files stored in GLX RAM. Are you sure you want to continue?
- Cannot disconnect the battery while the GLX is plugged into an external power supply. Please disconnect power and try again
- Disconnect Battery
- Audio Settings
- Speaker Volume
- Mic Input Volume
- Bits Per Sample
- Sample Rate
- Open Last Experiment
- Open New Experiment
- Startup Action
- Failed to set date/time.
- Set
- Set Date and Time
- DST Not Set
- DST Off
- DST On
- Daylight Savings Time
- Eastern
- Central
- Mountain
- Pacific
- Alaska
- Hawaii
- Time Zone Not Set
- Time Zone
- Second
- Minute
- Hour
- Year
- Day
- Month
- Sensor Auto-Display
- Language
- Indic
- European
- Number Format
- Screen Contrast
- Keypress (30 s)
- Keypress (10 s)
- Back Light
- 60 Minutes
- 30 Minutes
- 10 Minutes
- 5 Minutes
- 2 Minutes
- Auto Power Off
- 12-Hour (AM/PM)
- 24-Hour
- Time Format
- YY/MM/DD
- DD/MM/YY
- MM/DD/YY
- Date Format
- Name
- Clear Input
- Eight
- Six
- Four
- Two
- KML
- GPX
- Arc
- GIS
- ASCII
- Unicode
- Export File Format
- Export File Name
- GLXport.txt
- Add All
- Add Data
- Don't Export
- Export
- Data export is complete.
- Exporting all data to USB storage...
- Failed to create export file on USB storage device.
- Please add some data to the table before exporting
- You must connect a USB storage device to export data.
- Export All Data...
- Date/Time
- Lock Run Selection
- Show Time
- Tables
- Four Columns
- Three Columns
- Two Columns
- One Column
- Delete Row
- Insert Row
- Delete Cell
- Insert Cell
- New Data Column
- Edit Cell
- Hide All
- Show All
- Count (#)
- Standard Deviation ()
- Average (Avg)
- Maximum (Max)
- Minimum (Min)
- Clear Column
- Treat this column as text data?
- No editable columns in this table. Create a new column?
- Failed to get a license from the USB Flash Drive.
- Failed to license this GLX for %s. There are still %d licenses remaining.
- This GLX is now licensed for %s. There are %d licenses remaining.
- There are %d %s licenses available. Would you like to license this GLX?
- This GLX is not licensed to connect to the Ocean Optics Spectrum Analyzer.
- Initializing...Ocean Optics
- Offset
- Amplitude
- Period
- Frequency
- Power Amp Config
- Spectrum Analysis Config
- Close
- Clear Scans
- Save Ref
- Save Dark
- Bandwidth
- Wavelength
- Scan Mode
- mol/L
- Concentration
- Beer's Law
- Time Aquisition
- Scope
- Lamp
- Color Temperature
- Elec. Dark Correction
- Lamp Enable
- Data Aquisition
- Boxcar
- Average
- Integration Time Unit
- Integration Time
- Failed to clear dark and reference scans.
- Failed to save reference spectrum.
- Failed to save dark spectrum.
- Inv Linear Fit Cal
- Linear Fit Cal
- Could not calculate linear fit
- Create Calculation from Linear Fit
- Toggle Active Data
- Zoom
- Stop Condition
- Trigger Settings...
- Trigger Level
- Trigger Edge
- Trigger Enabled
- Rising
- Falling
- Trigger Settings
- Trigger Value
- Trigger
- Derivative
- Graph %d
- Area
- Area Tool
- Graphs
- Delete Graph Page
- Copy Graph Page
- New Graph Page
- Two Graphs
- Two Runs
- Two Measurements
- Connected Lines
- Data Cursor
- Tools
- Swap Cursors
- Linear Fit
- Coordinate Marker
- Slope Tool
- Delta Tool
- Smart Tool
- ScaleMove
- Scale/Move
- Auto Scale
- Calculating...
- Y2
- X
- DEG
- RAD
- Radians
- Calculator Graph
- Calculation is complete.
- Invalid Function Combination
- Argument out of range
- Compilation failed.
- This calculation has no expression.
- Unknown token number %hd.
- The function %ls is not recognized.
- %ls is invalid in this location.
- Please define the variable %ls.
- There are two decimal points in %ls.
- Too many variables.
- This function has too many arguments.
- %ls has too few arguments here.
- Wrong number of arguments to function.
- %ls needs a second argument here.This formula is missing a ).
- This formula is missing a (.
- A ( is required here.
- %ls is not valid variable name.
- Invalid channel separator %ls.
- %ls is an illegal character.
- Invalid channel %ls.
- This formula is incomplete.
- This function requires a number here.
- This formula references itself through %ls.
- %ls is not recognized.
- Model
- Calculation is OK
- Calculation is OK (as a model)
- Enter a calculation expression
- Edit
- Insert Expression
- Delete Expression
- Clear Expression
- Num Lock
- [Data]
- Functions
- Calculator
- Table
- Graph
- Notes
- Settings
- Timing
- Stopwatch
- Meter
- Digits
- Data Files
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement