API tools faq
paste
Advertisement
Guest User

Untitled

a guest
Jun 18th, 2017
662
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 26.05 KB | None | 0 0
raw download clone embed print report
  1. 11:47:59.473 : <Slic3r> Unknown option: gui-mode
  2. 11:47:59.488 : <Slic3r> Slic3r 1.35.5-prusa3d-win64 is a STL-to-GCODE translator for RepRap 3D printers
  3. 11:47:59.488 : <Slic3r> written by Alessandro Ranellucci <aar@cpan.org> - http://slic3r.org/
  4. 11:47:59.488 : <Slic3r> Usage: slic3r.pl [ OPTIONS ] [ file.stl ] [ file2.stl ] ...
  5. 11:47:59.488 : <Slic3r> --help Output this usage screen and exit
  6. 11:47:59.488 : <Slic3r> --version Output the version of Slic3r and exit
  7. 11:47:59.488 : <Slic3r> --save <file> Save configuration to the specified file
  8. 11:47:59.488 : <Slic3r> --load <file> Load configuration from the specified file. It can be used
  9. 11:47:59.488 : <Slic3r> more than once to load options from multiple files.
  10. 11:47:59.488 : <Slic3r> -o, --output <file> File to output gcode to (by default, the file will be saved
  11. 11:47:59.488 : <Slic3r> into the same directory as the input file using the
  12. 11:47:59.488 : <Slic3r> --output-filename-format to generate the filename.) If a
  13. 11:47:59.488 : <Slic3r> directory is specified for this option, the output will
  14. 11:47:59.488 : <Slic3r> be saved under that directory, and the filename will be
  15. 11:47:59.488 : <Slic3r> generated by --output-filename-format.
  16. 11:47:59.488 : <Slic3r>
  17. 11:47:59.488 : <Slic3r> Non-slicing actions (no G-code will be generated):
  18. 11:47:59.488 : <Slic3r> --repair Repair given STL files and save them as <name>_fixed.obj
  19. 11:47:59.488 : <Slic3r> --cut <z> Cut given input files at given Z (relative) and export
  20. 11:47:59.488 : <Slic3r> them as <name>_upper.stl and <name>_lower.stl
  21. 11:47:59.488 : <Slic3r> --split Split the shells contained in given STL file into several STL files
  22. 11:47:59.488 : <Slic3r> --info Output information about the supplied file(s) and exit
  23. 11:47:59.488 : <Slic3r>
  24. 11:47:59.488 : <Slic3r> -j, --threads <num> Number of threads to use (1+, default: 2)
  25. 11:47:59.488 : <Slic3r> GUI options:
  26. 11:47:59.488 : <Slic3r> --gui Forces the GUI launch instead of command line slicing (if you
  27. 11:47:59.488 : <Slic3r> supply a model file, it will be loaded into the plater)
  28. 11:47:59.488 : <Slic3r> --no-plater Disable the plater tab
  29. 11:47:59.488 : <Slic3r> --autosave <file> Automatically export current configuration to the specified file
  30. 11:47:59.488 : <Slic3r> Output options:
  31. 11:47:59.488 : <Slic3r> --output-filename-format
  32. 11:47:59.488 : <Slic3r> Output file name format; all config options enclosed in brackets
  33. 11:47:59.488 : <Slic3r> will be replaced by their values, as well as [input_filename_base]
  34. 11:47:59.488 : <Slic3r> and [input_filename] (default: [input_filename_base].gcode)
  35. 11:47:59.488 : <Slic3r> --post-process Generated G-code will be processed with the supplied script;
  36. 11:47:59.488 : <Slic3r> call this more than once to process through multiple scripts.
  37. 11:47:59.488 : <Slic3r> --export-svg Export a SVG file containing slices instead of G-code.
  38. 11:47:59.488 : <Slic3r> -m, --merge If multiple files are supplied, they will be composed into a single
  39. 11:47:59.488 : <Slic3r> print rather than processed individually.
  40. 11:47:59.488 : <Slic3r>
  41. 11:47:59.488 : <Slic3r> Printer options:
  42. 11:47:59.488 : <Slic3r> --nozzle-diameter Diameter of nozzle in mm (default: 0.5)
  43. 11:47:59.488 : <Slic3r> --print-center Coordinates in mm of the point to center the print around
  44. 11:47:59.488 : <Slic3r> (default: 100,100)
  45. 11:47:59.488 : <Slic3r> --z-offset Additional height in mm to add to vertical coordinates
  46. 11:47:59.488 : <Slic3r> (+/-, default: 0)
  47. 11:47:59.488 : <Slic3r> --gcode-flavor The type of G-code to generate (reprap/teacup/repetier/makerware/sailfish/mach3/machinekit/smoothie/no-extrusion,
  48. 11:47:59.488 : <Slic3r> default: reprap)
  49. 11:47:59.488 : <Slic3r> --use-relative-e-distances Enable this to get relative E values (default: no)
  50. 11:47:59.488 : <Slic3r> --use-firmware-retraction Enable firmware-controlled retraction using G10/G11 (default: no)
  51. 11:47:59.488 : <Slic3r> --use-volumetric-e Express E in cubic millimeters and prepend M200 (default: no)
  52. 11:47:59.488 : <Slic3r> --set-and-wait-temperatures Use M190 instead of M140 for temperature changes past the first (default: no)
  53. 11:47:59.488 : <Slic3r> --gcode-comments Make G-code verbose by adding comments (default: no)
  54. 11:47:59.488 : <Slic3r>
  55. 11:47:59.488 : <Slic3r> Filament options:
  56. 11:47:59.488 : <Slic3r> --filament-diameter Diameter in mm of your raw filament (default: 3)
  57. 11:47:59.488 : <Slic3r> --extrusion-multiplier
  58. 11:47:59.488 : <Slic3r> Change this to alter the amount of plastic extruded. There should be
  59. 11:47:59.488 : <Slic3r> very little need to change this value, which is only useful to
  60. 11:47:59.488 : <Slic3r> compensate for filament packing (default: 1)
  61. 11:47:59.488 : <Slic3r> --temperature Extrusion temperature in degree Celsius, set 0 to disable (default: 200)
  62. 11:47:59.488 : <Slic3r> --first-layer-temperature Extrusion temperature for the first layer, in degree Celsius,
  63. 11:47:59.504 : <Slic3r> set 0 to disable (default: same as --temperature)
  64. 11:47:59.504 : <Slic3r> --bed-temperature Heated bed temperature in degree Celsius, set 0 to disable (default: 0)
  65. 11:47:59.504 : <Slic3r> --first-layer-bed-temperature Heated bed temperature for the first layer, in degree Celsius,
  66. 11:47:59.504 : <Slic3r> set 0 to disable (default: same as --bed-temperature)
  67. 11:47:59.504 : <Slic3r>
  68. 11:47:59.504 : <Slic3r> Speed options:
  69. 11:47:59.504 : <Slic3r> --travel-speed Speed of non-print moves in mm/s (default: 130)
  70. 11:47:59.504 : <Slic3r> --perimeter-speed Speed of print moves for perimeters in mm/s (default: 60)
  71. 11:47:59.504 : <Slic3r> --small-perimeter-speed
  72. 11:47:59.504 : <Slic3r> Speed of print moves for small perimeters in mm/s or % over perimeter speed
  73. 11:47:59.504 : <Slic3r> (default: 15)
  74. 11:47:59.504 : <Slic3r> --external-perimeter-speed
  75. 11:47:59.504 : <Slic3r> Speed of print moves for the external perimeter in mm/s or % over perimeter speed
  76. 11:47:59.504 : <Slic3r> (default: 50%)
  77. 11:47:59.504 : <Slic3r> --infill-speed Speed of print moves in mm/s (default: 80)
  78. 11:47:59.504 : <Slic3r> --solid-infill-speed Speed of print moves for solid surfaces in mm/s or % over infill speed
  79. 11:47:59.504 : <Slic3r> (default: 20)
  80. 11:47:59.504 : <Slic3r> --top-solid-infill-speed Speed of print moves for top surfaces in mm/s or % over solid infill speed
  81. 11:47:59.504 : <Slic3r> (default: 15)
  82. 11:47:59.504 : <Slic3r> --support-material-speed
  83. 11:47:59.504 : <Slic3r> Speed of support material print moves in mm/s (default: 60)
  84. 11:47:59.504 : <Slic3r> --support-material-interface-speed
  85. 11:47:59.504 : <Slic3r> Speed of support material interface print moves in mm/s or % over support material
  86. 11:47:59.504 : <Slic3r> speed (default: 100%)
  87. 11:47:59.504 : <Slic3r> --bridge-speed Speed of bridge print moves in mm/s (default: 60)
  88. 11:47:59.504 : <Slic3r> --gap-fill-speed Speed of gap fill print moves in mm/s (default: 20)
  89. 11:47:59.504 : <Slic3r> --first-layer-speed Speed of print moves for bottom layer, expressed either as an absolute
  90. 11:47:59.504 : <Slic3r> value or as a percentage over normal speeds (default: 30)
  91. 11:47:59.504 : <Slic3r>
  92. 11:47:59.504 : <Slic3r> Acceleration options:
  93. 11:47:59.504 : <Slic3r> --perimeter-acceleration
  94. 11:47:59.504 : <Slic3r> Overrides firmware's default acceleration for perimeters. (mm/s^2, set zero
  95. 11:47:59.504 : <Slic3r> to disable; default: 0)
  96. 11:47:59.504 : <Slic3r> --infill-acceleration
  97. 11:47:59.504 : <Slic3r> Overrides firmware's default acceleration for infill. (mm/s^2, set zero
  98. 11:47:59.504 : <Slic3r> to disable; default: 0)
  99. 11:47:59.504 : <Slic3r> --bridge-acceleration
  100. 11:47:59.504 : <Slic3r> Overrides firmware's default acceleration for bridges. (mm/s^2, set zero
  101. 11:47:59.504 : <Slic3r> to disable; default: 0)
  102. 11:47:59.504 : <Slic3r> --first-layer-acceleration
  103. 11:47:59.504 : <Slic3r> Overrides firmware's default acceleration for first layer. (mm/s^2, set zero
  104. 11:47:59.504 : <Slic3r> to disable; default: 0)
  105. 11:47:59.504 : <Slic3r> --default-acceleration
  106. 11:47:59.504 : <Slic3r> Acceleration will be reset to this value after the specific settings above
  107. 11:47:59.504 : <Slic3r> have been applied. (mm/s^2, set zero to disable; default: 0)
  108. 11:47:59.504 : <Slic3r>
  109. 11:47:59.504 : <Slic3r> Accuracy options:
  110. 11:47:59.504 : <Slic3r> --layer-height Layer height in mm (default: 0.3)
  111. 11:47:59.504 : <Slic3r> --first-layer-height Layer height for first layer (mm or %, default: 0.35)
  112. 11:47:59.504 : <Slic3r> --infill-every-layers
  113. 11:47:59.504 : <Slic3r> Infill every N layers (default: 1)
  114. 11:47:59.504 : <Slic3r> --solid-infill-every-layers
  115. 11:47:59.504 : <Slic3r> Force a solid layer every N layers (default: 0)
  116. 11:47:59.504 : <Slic3r>
  117. 11:47:59.504 : <Slic3r> Print options:
  118. 11:47:59.504 : <Slic3r> --perimeters Number of perimeters/horizontal skins (range: 0+, default: 3)
  119. 11:47:59.504 : <Slic3r> --top-solid-layers Number of solid layers to do for top surfaces (range: 0+, default: 3)
  120. 11:47:59.504 : <Slic3r> --bottom-solid-layers Number of solid layers to do for bottom surfaces (range: 0+, default: 3)
  121. 11:47:59.504 : <Slic3r> --solid-layers Shortcut for setting the two options above at once
  122. 11:47:59.504 : <Slic3r> --fill-density Infill density (range: 0%-100%, default: 20%)
  123. 11:47:59.504 : <Slic3r> --fill-angle Infill angle in degrees (range: 0-90, default: 45)
  124. 11:47:59.504 : <Slic3r> --fill-pattern Pattern to use to fill non-solid layers (default: stars)
  125. 11:47:59.504 : <Slic3r> --external-fill-pattern Pattern to use to fill solid layers (default: rectilinear)
  126. 11:47:59.504 : <Slic3r> --start-gcode Load initial G-code from the supplied file. This will overwrite
  127. 11:47:59.504 : <Slic3r> the default command (home all axes [G28]).
  128. 11:47:59.504 : <Slic3r> --end-gcode Load final G-code from the supplied file. This will overwrite
  129. 11:47:59.504 : <Slic3r> the default commands (turn off temperature [M104 S0],
  130. 11:47:59.504 : <Slic3r> home X axis [G28 X], disable motors [M84]).
  131. 11:47:59.504 : <Slic3r> --before-layer-gcode Load before-layer-change G-code from the supplied file (default: nothing).
  132. 11:47:59.504 : <Slic3r> --layer-gcode Load layer-change G-code from the supplied file (default: nothing).
  133. 11:47:59.504 : <Slic3r> --toolchange-gcode Load tool-change G-code from the supplied file (default: nothing).
  134. 11:47:59.504 : <Slic3r> --seam-position Position of loop starting points (random/nearest/aligned, default: aligned).
  135. 11:47:59.504 : <Slic3r> --external-perimeters-first Reverse perimeter order. (default: no)
  136. 11:47:59.504 : <Slic3r> --spiral-vase Experimental option to raise Z gradually when printing single-walled vases
  137. 11:47:59.504 : <Slic3r> (default: no)
  138. 11:47:59.504 : <Slic3r> --only-retract-when-crossing-perimeters
  139. 11:47:59.504 : <Slic3r> Disable retraction when travelling between infill paths inside the same island.
  140. 11:47:59.504 : <Slic3r> (default: no)
  141. 11:47:59.504 : <Slic3r> --solid-infill-below-area
  142. 11:47:59.504 : <Slic3r> Force solid infill when a region has a smaller area than this threshold
  143. 11:47:59.504 : <Slic3r> (mm^2, default: 70)
  144. 11:47:59.504 : <Slic3r> --infill-only-where-needed
  145. 11:47:59.520 : <Slic3r> Only infill under ceilings (default: no)
  146. 11:47:59.520 : <Slic3r> --infill-first Make infill before perimeters (default: no)
  147. 11:47:59.520 : <Slic3r>
  148. 11:47:59.520 : <Slic3r> Quality options (slower slicing):
  149. 11:47:59.520 : <Slic3r> --extra-perimeters Add more perimeters when needed (default: yes)
  150. 11:47:59.520 : <Slic3r> --ensure-vertical-shell-thickness Add solid infill near sloping surfaces to guarantee the vertical shell thickness (top+bottom solid layers). (default: no)
  151. 11:47:59.520 : <Slic3r> --avoid-crossing-perimeters Optimize travel moves so that no perimeters are crossed (default: no)
  152. 11:47:59.520 : <Slic3r> --thin-walls Detect single-width walls (default: yes)
  153. 11:47:59.520 : <Slic3r> --overhangs Experimental option to use bridge flow, speed and fan for overhangs
  154. 11:47:59.520 : <Slic3r> (default: yes)
  155. 11:47:59.520 : <Slic3r>
  156. 11:47:59.520 : <Slic3r> Support material options:
  157. 11:47:59.520 : <Slic3r> --support-material Generate support material for overhangs
  158. 11:47:59.520 : <Slic3r> --support-material-threshold
  159. 11:47:59.520 : <Slic3r> Overhang threshold angle (range: 0-90, set 0 for automatic detection,
  160. 11:47:59.520 : <Slic3r> default: 0)
  161. 11:47:59.520 : <Slic3r> --support-material-pattern
  162. 11:47:59.520 : <Slic3r> Pattern to use for support material (default: pillars)
  163. 11:47:59.520 : <Slic3r> --support-material-with-sheath
  164. 11:47:59.520 : <Slic3r> Add a sheath (a single perimeter line) around the base support.
  165. 11:47:59.520 : <Slic3r> This makes the support more reliable, but also more difficult to remove. (default: yes)
  166. 11:47:59.520 : <Slic3r> --support-material-spacing
  167. 11:47:59.520 : <Slic3r> Spacing between pattern lines (mm, default: 2.5)
  168. 11:47:59.520 : <Slic3r> --support-material-angle
  169. 11:47:59.520 : <Slic3r> Support material angle in degrees (range: 0-90, default: 0)
  170. 11:47:59.520 : <Slic3r> --support-material-contact-distance
  171. 11:47:59.520 : <Slic3r> Vertical distance between object and support material (0+, default: 0.2)
  172. 11:47:59.520 : <Slic3r> --support-material-xy-spacing
  173. 11:47:59.520 : <Slic3r> "XY separation between an object and its support. If expressed as percentage (for example 50%),
  174. 11:47:59.520 : <Slic3r> it will be calculated over external perimeter width (default: half of exteral perimeter width)
  175. 11:47:59.520 : <Slic3r> --support-material-interface-layers
  176. 11:47:59.520 : <Slic3r> Number of perpendicular layers between support material and object (0+, default: 3)
  177. 11:47:59.520 : <Slic3r> --support-material-interface-spacing
  178. 11:47:59.520 : <Slic3r> Spacing between interface pattern lines (mm, set 0 to get a solid layer, default: 0)
  179. 11:47:59.520 : <Slic3r> --raft-layers Number of layers to raise the printed objects by (range: 0+, default: 0)
  180. 11:47:59.520 : <Slic3r> --support-material-enforce-layers
  181. 11:47:59.520 : <Slic3r> Enforce support material on the specified number of layers from bottom,
  182. 11:47:59.520 : <Slic3r> regardless of --support-material and threshold (0+, default: 0)
  183. 11:47:59.520 : <Slic3r> --support-material-buildplate-only
  184. 11:47:59.520 : <Slic3r> Only create support if it lies on a build plate. Don't create support on a print. (default: no)
  185. 11:47:59.520 : <Slic3r> --dont-support-bridges
  186. 11:47:59.520 : <Slic3r> Experimental option for preventing support material from being generated under bridged areas (default: yes)
  187. 11:47:59.520 : <Slic3r>
  188. 11:47:59.520 : <Slic3r> Retraction options:
  189. 11:47:59.520 : <Slic3r> --retract-length Length of retraction in mm when pausing extrusion (default: 2)
  190. 11:47:59.520 : <Slic3r> --retract-speed Speed for retraction in mm/s (default: 40)
  191. 11:47:59.520 : <Slic3r> --deretract-speed Speed for deretraction (loading of filament after a retract) in mm/s (default: 40)
  192. 11:47:59.520 : <Slic3r> --retract-restart-extra
  193. 11:47:59.520 : <Slic3r> Additional amount of filament in mm to push after
  194. 11:47:59.520 : <Slic3r> compensating retraction (default: 0)
  195. 11:47:59.520 : <Slic3r> --retract-before-travel
  196. 11:47:59.520 : <Slic3r> Only retract before travel moves of this length in mm (default: 2)
  197. 11:47:59.520 : <Slic3r> --retract-lift Lift Z by the given distance in mm when retracting (default: 0)
  198. 11:47:59.520 : <Slic3r> --retract-lift-above Only lift Z when above the specified height (default: 0)
  199. 11:47:59.520 : <Slic3r> --retract-lift-below Only lift Z when below the specified height (default: 0)
  200. 11:47:59.520 : <Slic3r> --retract-layer-change
  201. 11:47:59.520 : <Slic3r> Enforce a retraction before each Z move (default: no)
  202. 11:47:59.520 : <Slic3r> --wipe Wipe the nozzle while doing a retraction (default: no)
  203. 11:47:59.520 : <Slic3r>
  204. 11:47:59.520 : <Slic3r> Retraction options for multi-extruder setups:
  205. 11:47:59.520 : <Slic3r> --retract-length-toolchange
  206. 11:47:59.520 : <Slic3r> Length of retraction in mm when disabling tool (default: 10)
  207. 11:47:59.520 : <Slic3r> --retract-restart-extra-toolchange
  208. 11:47:59.520 : <Slic3r> Additional amount of filament in mm to push after
  209. 11:47:59.520 : <Slic3r> switching tool (default: 0)
  210. 11:47:59.520 : <Slic3r>
  211. 11:47:59.520 : <Slic3r> Cooling options:
  212. 11:47:59.520 : <Slic3r> --cooling Enable fan and cooling control
  213. 11:47:59.520 : <Slic3r> --min-fan-speed Minimum fan speed (default: 35%)
  214. 11:47:59.520 : <Slic3r> --max-fan-speed Maximum fan speed (default: 100%)
  215. 11:47:59.520 : <Slic3r> --bridge-fan-speed Fan speed to use when bridging (default: 100%)
  216. 11:47:59.520 : <Slic3r> --fan-below-layer-time Enable fan if layer print time is below this approximate number
  217. 11:47:59.520 : <Slic3r> of seconds (default: 60)
  218. 11:47:59.520 : <Slic3r> --slowdown-below-layer-time Slow down if layer print time is below this approximate number
  219. 11:47:59.520 : <Slic3r> of seconds (default: 5)
  220. 11:47:59.520 : <Slic3r> --min-print-speed Minimum print speed (mm/s, default: 10)
  221. 11:47:59.520 : <Slic3r> --disable-fan-first-layers Disable fan for the first N layers (default: 3)
  222. 11:47:59.520 : <Slic3r> --fan-always-on Keep fan always on at min fan speed, even for layers that don't need
  223. 11:47:59.520 : <Slic3r> cooling
  224. 11:47:59.520 : <Slic3r>
  225. 11:47:59.520 : <Slic3r> Skirt options:
  226. 11:47:59.520 : <Slic3r> --skirts Number of skirts to draw (0+, default: 1)
  227. 11:47:59.520 : <Slic3r> --skirt-distance Distance in mm between innermost skirt and object
  228. 11:47:59.535 : <Slic3r> (default: 6)
  229. 11:47:59.535 : <Slic3r> --skirt-height Height of skirts to draw (expressed in layers, 0+, default: 1)
  230. 11:47:59.535 : <Slic3r> --min-skirt-length Generate no less than the number of loops required to consume this length
  231. 11:47:59.535 : <Slic3r> of filament on the first layer, for each extruder (mm, 0+, default: 0)
  232. 11:47:59.535 : <Slic3r> --brim-width Width of the brim that will get added to each object to help adhesion
  233. 11:47:59.535 : <Slic3r> (mm, default: 0)
  234. 11:47:59.535 : <Slic3r>
  235. 11:47:59.535 : <Slic3r> Transform options:
  236. 11:47:59.535 : <Slic3r> --scale Factor for scaling input object (default: 1)
  237. 11:47:59.535 : <Slic3r> --rotate Rotation angle in degrees (0-360, default: 0)
  238. 11:47:59.535 : <Slic3r> --duplicate Number of items with auto-arrange (1+, default: 1)
  239. 11:47:59.535 : <Slic3r> --duplicate-grid Number of items with grid arrangement (default: 1,1)
  240. 11:47:59.535 : <Slic3r> --duplicate-distance Distance in mm between copies (default: 6)
  241. 11:47:59.535 : <Slic3r> --dont-arrange Don't arrange the objects on the build plate. The model coordinates
  242. 11:47:59.535 : <Slic3r> define the absolute positions on the build plate.
  243. 11:47:59.535 : <Slic3r> The option --print-center will be ignored.
  244. 11:47:59.535 : <Slic3r> --clip_multipart_objects When printing multi-material objects, this settings will make slic3r to clip the overlapping
  245. 11:47:59.535 : <Slic3r> object parts one by the other (2nd part will be clipped by the 1st, 3rd part will be clipped
  246. 11:47:59.535 : <Slic3r> by the 1st and 2nd etc). (default: 0)";
  247. 11:47:59.535 : <Slic3r> --xy-size-compensation
  248. 11:47:59.535 : <Slic3r> Grow/shrink objects by the configured absolute distance (mm, default: 0)
  249. 11:47:59.535 : <Slic3r>
  250. 11:47:59.535 : <Slic3r> Sequential printing options:
  251. 11:47:59.535 : <Slic3r> --complete-objects When printing multiple objects and/or copies, complete each one before
  252. 11:47:59.535 : <Slic3r> starting the next one; watch out for extruder collisions (default: no)
  253. 11:47:59.535 : <Slic3r> --extruder-clearance-radius Radius in mm above which extruder won't collide with anything
  254. 11:47:59.535 : <Slic3r> (default: 20)
  255. 11:47:59.535 : <Slic3r> --extruder-clearance-height Maximum vertical extruder depth; i.e. vertical distance from
  256. 11:47:59.535 : <Slic3r> extruder tip and carriage bottom (default: 20)
  257. 11:47:59.535 : <Slic3r>
  258. 11:47:59.535 : <Slic3r> Miscellaneous options:
  259. 11:47:59.535 : <Slic3r> --notes Notes to be added as comments to the output file
  260. 11:47:59.535 : <Slic3r> --resolution Minimum detail resolution (mm, set zero for full resolution, default: 0)
  261. 11:47:59.535 : <Slic3r>
  262. 11:47:59.535 : <Slic3r> Flow options (advanced):
  263. 11:47:59.535 : <Slic3r> --extrusion-width Set extrusion width manually; it accepts either an absolute value in mm
  264. 11:47:59.535 : <Slic3r> (like 0.65) or a percentage over layer height (like 200%)
  265. 11:47:59.535 : <Slic3r> --first-layer-extrusion-width
  266. 11:47:59.535 : <Slic3r> Set a different extrusion width for first layer
  267. 11:47:59.535 : <Slic3r> --perimeter-extrusion-width
  268. 11:47:59.535 : <Slic3r> Set a different extrusion width for perimeters
  269. 11:47:59.535 : <Slic3r> --external-perimeter-extrusion-width
  270. 11:47:59.535 : <Slic3r> Set a different extrusion width for external perimeters
  271. 11:47:59.535 : <Slic3r> --infill-extrusion-width
  272. 11:47:59.535 : <Slic3r> Set a different extrusion width for infill
  273. 11:47:59.535 : <Slic3r> --solid-infill-extrusion-width
  274. 11:47:59.535 : <Slic3r> Set a different extrusion width for solid infill
  275. 11:47:59.535 : <Slic3r> --top-infill-extrusion-width
  276. 11:47:59.535 : <Slic3r> Set a different extrusion width for top infill
  277. 11:47:59.535 : <Slic3r> --support-material-extrusion-width
  278. 11:47:59.535 : <Slic3r> Set a different extrusion width for support material
  279. 11:47:59.535 : <Slic3r> --infill-overlap Overlap between infill and perimeters (default: 55%)
  280. 11:47:59.535 : <Slic3r> --bridge-flow-ratio Multiplier for extrusion when bridging (> 0, default: 1)
  281. 11:47:59.535 : <Slic3r>
  282. 11:47:59.535 : <Slic3r> Multiple extruder options:
  283. 11:47:59.535 : <Slic3r> --extruder-offset Offset of each extruder, if firmware doesn't handle the displacement
  284. 11:47:59.535 : <Slic3r> (can be specified multiple times, default: 0x0)
  285. 11:47:59.535 : <Slic3r> --perimeter-extruder
  286. 11:47:59.535 : <Slic3r> Extruder to use for perimeters and brim (1+, default: 1)
  287. 11:47:59.535 : <Slic3r> --infill-extruder Extruder to use for infill (1+, default: 1)
  288. 11:47:59.535 : <Slic3r> --solid-infill-extruder Extruder to use for solid infill (1+, default: 1)
  289. 11:47:59.535 : <Slic3r> --support-material-extruder
  290. 11:47:59.535 : <Slic3r> Extruder to use for support material, raft and skirt
  291. 11:47:59.535 : <Slic3r> (1+, 0 to use the current extruder to minimize tool changes, default: 1)
  292. 11:47:59.535 : <Slic3r> --support-material-interface-extruder
  293. 11:47:59.535 : <Slic3r> Extruder to use for support material interface
  294. 11:47:59.535 : <Slic3r> (1+, 0 to use the current extruder to minimize tool changes, default: 1)
  295. 11:47:59.535 : <Slic3r> --ooze-prevention Drop temperature and park extruders outside a full skirt for automatic wiping
  296. 11:47:59.535 : <Slic3r> (default: no)
  297. 11:47:59.535 : <Slic3r> --standby-temperature-delta
  298. 11:47:59.535 : <Slic3r> Temperature difference to be applied when an extruder is not active and
  299. 11:47:59.535 : <Slic3r> --ooze-prevention is enabled (default: -5)
  300. 11:47:59.535 : <Slic3r>
  301. 11:47:59.645 : <Slic3r> Slic3r installed in a loclized path. Using an 8.3 path: "C:\PROGRA~1\REPETI~1\SLIC3R~2\"
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!