Guest User

DMESG

a guest
Nov 29th, 2017
118
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. pi@raspberrypi / $ dmesg
  2. [ 0.000000] Booting Linux on physical CPU 0xf00
  3. [ 0.000000] Initializing cgroup subsys cpuset
  4. [ 0.000000] Initializing cgroup subsys cpu
  5. [ 0.000000] Initializing cgroup subsys cpuacct
  6. [ 0.000000] Linux version 4.1.19-v7+ (dc4@dc4-XPS13-9333) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611) ) #858 SMP Tue Mar 15 15:56:00 GMT 2016
  7. [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
  8. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  9. [ 0.000000] Machine model: Raspberry Pi 2 Model B Rev 1.1
  10. [ 0.000000] cma: Reserved 8 MiB at 0x36400000
  11. [ 0.000000] Memory policy: Data cache writealloc
  12. [ 0.000000] On node 0 totalpages: 225280
  13. [ 0.000000] free_area_init_node: node 0, pgdat 80880fc0, node_mem_map b5c44000
  14. [ 0.000000] Normal zone: 1980 pages used for memmap
  15. [ 0.000000] Normal zone: 0 pages reserved
  16. [ 0.000000] Normal zone: 225280 pages, LIFO batch:31
  17. [ 0.000000] [bcm2709_smp_init_cpus] enter (9420->f3003010)
  18. [ 0.000000] [bcm2709_smp_init_cpus] ncores=4
  19. [ 0.000000] PERCPU: Embedded 12 pages/cpu @b6fb1000 s20416 r8192 d20544 u49152
  20. [ 0.000000] pcpu-alloc: s20416 r8192 d20544 u49152 alloc=12*4096
  21. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
  22. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 223300
  23. [ 0.000000] Kernel command line: dma.dmachans=0x7f35 bcm2708_fb.fbwidth=1872 bcm2708_fb.fbheight=1168 bcm2709.boardrev=0xa01041 bcm2709.serial=0x21e9c9d2 smsc95xx.macaddr=B8:27:EB:E9:C9:D2 bcm2708_fb.fbswap=1 bcm2709.uart_clock=3000000 bcm2709.disk_led_gpio=47 bcm2709.disk_led_active_low=0 vc_mem.mem_base=0x3dc00000 vc_mem.mem_size=0x3f000000 dwc_otg.lpm_enable=0 console=ttyAMA0,115200 console=tty1 root=/dev/mmcblk0p6 rootfstype=ext4 elevator=deadline rootwait
  24. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  25. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  26. [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  27. [ 0.000000] Memory: 874420K/901120K available (6064K kernel code, 534K rwdata, 1664K rodata, 444K init, 757K bss, 18508K reserved, 8192K cma-reserved)
  28. [ 0.000000] Virtual kernel memory layout:
  29. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  30. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  31. [ 0.000000] vmalloc : 0xb7800000 - 0xff000000 (1144 MB)
  32. [ 0.000000] lowmem : 0x80000000 - 0xb7000000 ( 880 MB)
  33. [ 0.000000] modules : 0x7f000000 - 0x80000000 ( 16 MB)
  34. [ 0.000000] .text : 0x80008000 - 0x807945f0 (7730 kB)
  35. [ 0.000000] .init : 0x80795000 - 0x80804000 ( 444 kB)
  36. [ 0.000000] .data : 0x80804000 - 0x80889b10 ( 535 kB)
  37. [ 0.000000] .bss : 0x8088c000 - 0x809497dc ( 758 kB)
  38. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  39. [ 0.000000] Hierarchical RCU implementation.
  40. [ 0.000000] Additional per-CPU info printed with stalls.
  41. [ 0.000000] NR_IRQS:608
  42. [ 0.000000] Architected cp15 timer(s) running at 19.20MHz (phys).
  43. [ 0.000000] clocksource arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
  44. [ 0.000011] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
  45. [ 0.000032] Switching to timer-based delay loop, resolution 52ns
  46. [ 0.000316] Console: colour dummy device 80x30
  47. [ 0.001509] console [tty1] enabled
  48. [ 0.001567] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
  49. [ 0.001643] pid_max: default: 32768 minimum: 301
  50. [ 0.002035] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  51. [ 0.002089] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
  52. [ 0.003376] Initializing cgroup subsys blkio
  53. [ 0.003448] Initializing cgroup subsys memory
  54. [ 0.003506] Initializing cgroup subsys devices
  55. [ 0.003557] Initializing cgroup subsys freezer
  56. [ 0.003621] Initializing cgroup subsys net_cls
  57. [ 0.003717] CPU: Testing write buffer coherency: ok
  58. [ 0.003827] ftrace: allocating 20313 entries in 60 pages
  59. [ 0.052904] CPU0: update cpu_capacity 1024
  60. [ 0.052980] CPU0: thread -1, cpu 0, socket 15, mpidr 80000f00
  61. [ 0.053020] [bcm2709_smp_prepare_cpus] enter
  62. [ 0.053176] Setting up static identity map for 0x8240 - 0x8274
  63. [ 0.055685] [bcm2709_boot_secondary] cpu:1 started (0) 18
  64. [ 0.056124] [bcm2709_secondary_init] enter cpu:1
  65. [ 0.056182] CPU1: update cpu_capacity 1024
  66. [ 0.056190] CPU1: thread -1, cpu 1, socket 15, mpidr 80000f01
  67. [ 0.056773] [bcm2709_boot_secondary] cpu:2 started (0) 18
  68. [ 0.057130] [bcm2709_secondary_init] enter cpu:2
  69. [ 0.057162] CPU2: update cpu_capacity 1024
  70. [ 0.057170] CPU2: thread -1, cpu 2, socket 15, mpidr 80000f02
  71. [ 0.057718] [bcm2709_boot_secondary] cpu:3 started (0) 16
  72. [ 0.057972] [bcm2709_secondary_init] enter cpu:3
  73. [ 0.058002] CPU3: update cpu_capacity 1024
  74. [ 0.058010] CPU3: thread -1, cpu 3, socket 15, mpidr 80000f03
  75. [ 0.058103] Brought up 4 CPUs
  76. [ 0.058213] SMP: Total of 4 processors activated (153.60 BogoMIPS).
  77. [ 0.058247] CPU: All CPU(s) started in HYP mode.
  78. [ 0.058276] CPU: Virtualization extensions available.
  79. [ 0.059296] devtmpfs: initialized
  80. [ 0.082939] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
  81. [ 0.083291] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  82. [ 0.084466] pinctrl core: initialized pinctrl subsystem
  83. [ 0.085282] NET: Registered protocol family 16
  84. [ 0.090958] DMA: preallocated 4096 KiB pool for atomic coherent allocations
  85. [ 0.092128] bcm2709.uart_clock = 3000000
  86. [ 0.097502] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  87. [ 0.097564] hw-breakpoint: maximum watchpoint size is 8 bytes.
  88. [ 0.097788] Serial: AMBA PL011 UART driver
  89. [ 0.097993] 3f201000.uart: ttyAMA0 at MMIO 0x3f201000 (irq = 83, base_baud = 0) is a PL011 rev2
  90. [ 0.597570] console [ttyAMA0] enabled
  91. [ 0.601834] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
  92. [ 0.678169] bcm2708-dmaengine 3f007000.dma: DMA legacy API manager at f3007000, dmachans=0xf35
  93. [ 0.686907] bcm2708-dmaengine 3f007000.dma: Initialized 7 DMA channels (+ 1 legacy)
  94. [ 0.695292] bcm2708-dmaengine 3f007000.dma: Load BCM2835 DMA engine driver
  95. [ 0.702206] bcm2708-dmaengine 3f007000.dma: dma_debug:0
  96. [ 0.708171] SCSI subsystem initialized
  97. [ 0.712180] usbcore: registered new interface driver usbfs
  98. [ 0.717808] usbcore: registered new interface driver hub
  99. [ 0.723278] usbcore: registered new device driver usb
  100. [ 0.729058] raspberrypi-firmware soc:firmware: Attached to firmware from 2016-03-15 14:51
  101. [ 0.764560] Switched to clocksource arch_sys_counter
  102. [ 0.818430] FS-Cache: Loaded
  103. [ 0.821699] CacheFiles: Loaded
  104. [ 0.836043] NET: Registered protocol family 2
  105. [ 0.841698] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
  106. [ 0.848936] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  107. [ 0.855604] TCP: Hash tables configured (established 8192 bind 8192)
  108. [ 0.862105] UDP hash table entries: 512 (order: 2, 16384 bytes)
  109. [ 0.868124] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  110. [ 0.874979] NET: Registered protocol family 1
  111. [ 0.879769] RPC: Registered named UNIX socket transport module.
  112. [ 0.885757] RPC: Registered udp transport module.
  113. [ 0.890476] RPC: Registered tcp transport module.
  114. [ 0.895214] RPC: Registered tcp NFSv4.1 backchannel transport module.
  115. [ 0.902866] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
  116. [ 0.912439] futex hash table entries: 1024 (order: 4, 65536 bytes)
  117. [ 0.934756] VFS: Disk quotas dquot_6.6.0
  118. [ 0.939089] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  119. [ 0.948602] FS-Cache: Netfs 'nfs' registered for caching
  120. [ 0.955118] NFS: Registering the id_resolver key type
  121. [ 0.960242] Key type id_resolver registered
  122. [ 0.964440] Key type id_legacy registered
  123. [ 0.971294] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  124. [ 0.978959] io scheduler noop registered
  125. [ 0.982915] io scheduler deadline registered (default)
  126. [ 0.988441] io scheduler cfq registered
  127. [ 0.994929] BCM2708FB: allocated DMA memory f6800000
  128. [ 0.999949] BCM2708FB: allocated DMA channel 0 @ f3007000
  129. [ 1.040880] Console: switching to colour frame buffer device 234x73
  130. [ 1.069458] Serial: 8250/16550 driver, 0 ports, IRQ sharing disabled
  131. [ 1.077267] vc-cma: Videocore CMA driver
  132. [ 1.081276] vc-cma: vc_cma_base = 0x00000000
  133. [ 1.086088] vc-cma: vc_cma_size = 0x00000000 (0 MiB)
  134. [ 1.091578] vc-cma: vc_cma_initial = 0x00000000 (0 MiB)
  135. [ 1.097339] vc-mem: phys_addr:0x00000000 mem_base=0x3dc00000 mem_size:0x3f000000(1008 MiB)
  136. [ 1.121756] brd: module loaded
  137. [ 1.133925] loop: module loaded
  138. [ 1.138309] vchiq: vchiq_init_state: slot_zero = 0xb6880000, is_master = 0
  139. [ 1.147310] Loading iSCSI transport class v2.0-870.
  140. [ 1.153290] usbcore: registered new interface driver smsc95xx
  141. [ 1.159293] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
  142. [ 1.365570] Core Release: 2.80a
  143. [ 1.368785] Setting default values for core params
  144. [ 1.373696] Finished setting default values for core params
  145. [ 1.579829] Using Buffer DMA mode
  146. [ 1.583213] Periodic Transfer Interrupt Enhancement - disabled
  147. [ 1.589163] Multiprocessor Interrupt Enhancement - disabled
  148. [ 1.594852] OTG VER PARAM: 0, OTG VER FLAG: 0
  149. [ 1.599289] Dedicated Tx FIFOs mode
  150. [ 1.603204] WARN::dwc_otg_hcd_init:1047: FIQ DMA bounce buffers: virt = 0xb6814000 dma = 0xf6814000 len=9024
  151. [ 1.613256] FIQ FSM acceleration enabled for :
  152. [ 1.613256] Non-periodic Split Transactions
  153. [ 1.613256] Periodic Split Transactions
  154. [ 1.613256] High-Speed Isochronous Endpoints
  155. [ 1.630236] dwc_otg: Microframe scheduler enabled
  156. [ 1.630316] WARN::hcd_init_fiq:412: FIQ on core 1 at 0x80417288
  157. [ 1.636347] WARN::hcd_init_fiq:413: FIQ ASM at 0x804175f8 length 36
  158. [ 1.642722] WARN::hcd_init_fiq:438: MPHI regs_base at 0xb789a000
  159. [ 1.648861] dwc_otg 3f980000.usb: DWC OTG Controller
  160. [ 1.653954] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
  161. [ 1.661445] dwc_otg 3f980000.usb: irq 32, io mem 0x00000000
  162. [ 1.667184] Init: Port Power? op_state=1
  163. [ 1.671175] Init: Power Port (0)
  164. [ 1.674791] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  165. [ 1.681701] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  166. [ 1.689073] usb usb1: Product: DWC OTG Controller
  167. [ 1.693863] usb usb1: Manufacturer: Linux 4.1.19-v7+ dwc_otg_hcd
  168. [ 1.699994] usb usb1: SerialNumber: 3f980000.usb
  169. [ 1.711422] hub 1-0:1.0: USB hub found
  170. [ 1.721136] hub 1-0:1.0: 1 port detected
  171. [ 1.731420] dwc_otg: FIQ enabled
  172. [ 1.731434] dwc_otg: NAK holdoff enabled
  173. [ 1.731444] dwc_otg: FIQ split-transaction FSM enabled
  174. [ 1.731487] Module dwc_common_port init
  175. [ 1.731903] usbcore: registered new interface driver usb-storage
  176. [ 1.744075] mousedev: PS/2 mouse device common for all mice
  177. [ 1.756336] bcm2835-cpufreq: min=600000 max=900000
  178. [ 1.767262] sdhci: Secure Digital Host Controller Interface driver
  179. [ 1.779260] sdhci: Copyright(c) Pierre Ossman
  180. [ 1.789761] sdhost: log_buf @ b6813000 (f6813000)
  181. [ 1.874607] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
  182. [ 1.906490] sdhci-pltfm: SDHCI platform and OF driver helper
  183. [ 1.918588] ledtrig-cpu: registered to indicate activity on CPUs
  184. [ 1.924716] Indeed it is in host mode hprt0 = 00021501
  185. [ 1.941744] hidraw: raw HID events driver (C) Jiri Kosina
  186. [ 1.953308] usbcore: registered new interface driver usbhid
  187. [ 1.964688] usbhid: USB HID core driver
  188. [ 1.974800] Initializing XFRM netlink socket
  189. [ 1.983995] mmc0: host does not support reading read-only switch, assuming write-enable
  190. [ 1.987375] mmc0: new high speed SDHC card at address e624
  191. [ 1.988058] mmcblk0: mmc0:e624 SL08G 7.40 GiB
  192. [ 1.990727] mmcblk0: p1 p2 < p5 p6 > p3
  193. [ 2.029739] NET: Registered protocol family 17
  194. [ 2.040117] Key type dns_resolver registered
  195. [ 2.050524] Registering SWP/SWPB emulation handler
  196. [ 2.061954] registered taskstats version 1
  197. [ 2.071999] vc-sm: Videocore shared memory driver
  198. [ 2.082397] [vc_sm_connected_init]: start
  199. [ 2.092836] [vc_sm_connected_init]: end - returning 0
  200. [ 2.104636] usb 1-1: new high-speed USB device number 2 using dwc_otg
  201. [ 2.117117] Indeed it is in host mode hprt0 = 00001101
  202. [ 2.119683] EXT4-fs (mmcblk0p6): INFO: recovery required on readonly filesystem
  203. [ 2.119690] EXT4-fs (mmcblk0p6): write access will be enabled during recovery
  204. [ 2.214283] EXT4-fs (mmcblk0p6): recovery complete
  205. [ 2.227974] EXT4-fs (mmcblk0p6): mounted filesystem with ordered data mode. Opts: (null)
  206. [ 2.242064] VFS: Mounted root (ext4 filesystem) readonly on device 179:6.
  207. [ 2.263275] devtmpfs: mounted
  208. [ 2.272926] Freeing unused kernel memory: 444K (80795000 - 80804000)
  209. [ 2.345023] usb 1-1: New USB device found, idVendor=0424, idProduct=9514
  210. [ 2.357811] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  211. [ 2.371869] hub 1-1:1.0: USB hub found
  212. [ 2.381735] hub 1-1:1.0: 5 ports detected
  213. [ 2.664701] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
  214. [ 2.775884] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00
  215. [ 2.789607] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
  216. [ 2.806429] smsc95xx v1.0.4
  217. [ 2.878805] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:e9:c9:d2
  218. [ 2.974686] usb 1-1.2: new high-speed USB device number 4 using dwc_otg
  219. [ 3.105544] usb 1-1.2: New USB device found, idVendor=1a40, idProduct=0101
  220. [ 3.120616] usb 1-1.2: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  221. [ 3.134646] usb 1-1.2: Product: USB 2.0 Hub
  222. [ 3.149107] hub 1-1.2:1.0: USB hub found
  223. [ 3.159856] hub 1-1.2:1.0: 4 ports detected
  224. [ 3.341023] udevd[173]: starting version 175
  225. [ 3.444738] usb 1-1.2.1: new high-speed USB device number 5 using dwc_otg
  226. [ 3.555486] usb 1-1.2.1: New USB device found, idVendor=1a40, idProduct=0101
  227. [ 3.569879] usb 1-1.2.1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
  228. [ 3.569892] usb 1-1.2.1: Product: USB 2.0 Hub
  229. [ 3.584236] hub 1-1.2.1:1.0: USB hub found
  230. [ 3.594881] hub 1-1.2.1:1.0: 4 ports detected
  231. [ 3.704742] usb 1-1.2.2: new high-speed USB device number 6 using dwc_otg
  232. [ 3.837925] usb 1-1.2.2: New USB device found, idVendor=0bc2, idProduct=0501
  233. [ 3.837952] usb 1-1.2.2: New USB device strings: Mfr=56, Product=64, SerialNumber=81
  234. [ 3.837965] usb 1-1.2.2: Product: USB Mass Storage
  235. [ 3.837980] usb 1-1.2.2: Manufacturer: Seagate
  236. [ 3.837992] usb 1-1.2.2: SerialNumber: CBA987737327
  237. [ 3.856120] usb-storage 1-1.2.2:1.0: USB Mass Storage device detected
  238. [ 3.878548] scsi host0: usb-storage 1-1.2.2:1.0
  239. [ 3.954851] usb 1-1.2.1.4: new full-speed USB device number 7 using dwc_otg
  240. [ 4.122381] usb 1-1.2.1.4: New USB device found, idVendor=045e, idProduct=028e
  241. [ 4.139997] usb 1-1.2.1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
  242. [ 4.157797] usb 1-1.2.1.4: Product: Controller
  243. [ 4.172094] usb 1-1.2.1.4: Manufacturer: \xffffffc2\xffffffa9\xffffffa9Microsoft Corporation
  244. [ 4.188311] usb 1-1.2.1.4: SerialNumber: 03B250D
  245. [ 4.254775] usb 1-1.2.3: new low-speed USB device number 8 using dwc_otg
  246. [ 4.404836] usb 1-1.2.3: New USB device found, idVendor=05ac, idProduct=0304
  247. [ 4.421952] usb 1-1.2.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  248. [ 4.439590] usb 1-1.2.3: Product: Apple Optical USB Mouse
  249. [ 4.455177] usb 1-1.2.3: Manufacturer: Mitsumi Electric
  250. [ 4.574743] usb 1-1.2.4: new low-speed USB device number 9 using dwc_otg
  251. [ 4.635603] bcm2835-rng 3f104000.rng: hwrng registered
  252. [ 4.659469] gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
  253. [ 4.702426] usb 1-1.2.4: New USB device found, idVendor=046d, idProduct=c31d
  254. [ 4.717833] usb 1-1.2.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
  255. [ 4.733667] usb 1-1.2.4: Product: USB Keyboard
  256. [ 4.746023] usb 1-1.2.4: Manufacturer: Logitech
  257. [ 4.778504] input: Logitech USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.0/0003:046D:C31D.0002/input/input0
  258. [ 4.855068] hid-generic 0003:046D:C31D.0002: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Keyboard] on usb-3f980000.usb-1.2.4/input0
  259. [ 4.884916] scsi 0:0:0:0: Direct-Access ST910082 4A 0000 PQ: 0 ANSI: 0
  260. [ 4.905158] sd 0:0:0:0: [sda] 195371568 512-byte logical blocks: (100 GB/93.2 GiB)
  261. [ 4.921654] sd 0:0:0:0: [sda] Write Protect is off
  262. [ 4.933692] sd 0:0:0:0: [sda] Mode Sense: 27 00 00 00
  263. [ 4.934738] sd 0:0:0:0: [sda] No Caching mode page found
  264. [ 4.934792] input: Logitech USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.4/1-1.2.4:1.1/0003:046D:C31D.0003/input/input1
  265. [ 4.967738] sd 0:0:0:0: [sda] Assuming drive cache: write through
  266. [ 4.994961] hid-generic 0003:046D:C31D.0003: input,hidraw1: USB HID v1.10 Device [Logitech USB Keyboard] on usb-3f980000.usb-1.2.4/input1
  267. [ 5.098686] input: Mitsumi Electric Apple Optical USB Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.3/1-1.2.3:1.0/0003:05AC:0304.0001/input/input2
  268. [ 5.102663] input: Microsoft X-Box 360 pad as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2.1/1-1.2.1.4/1-1.2.1.4:1.0/input/input3
  269. [ 5.102866] usbcore: registered new interface driver xpad
  270. [ 5.150312] sd 0:0:0:0: Attached scsi generic sg0 type 0
  271. [ 5.175434] apple 0003:05AC:0304.0001: input,hidraw2: USB HID v1.10 Mouse [Mitsumi Electric Apple Optical USB Mouse] on usb-3f980000.usb-1.2.3/input0
  272. [ 6.801826] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
  273. [ 6.959216] sda: sda1 sda2
  274. [ 6.986112] sd 0:0:0:0: [sda] Attached SCSI disk
  275. [ 7.058343] EXT4-fs (mmcblk0p6): re-mounted. Opts: (null)
  276. [ 7.285572] random: nonblocking pool is initialized
  277. [ 11.787589] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
  278. [ 13.487918] smsc95xx 1-1.1:1.0 eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
  279. [ 15.750333] cfg80211: Calling CRDA to update world regulatory domain
  280. [ 16.171262] Adding 102396k swap on /var/swap. Priority:-1 extents:1 across:102396k SSFS
  281. [ 18.904661] cfg80211: Calling CRDA to update world regulatory domain
  282. [ 21.839808] uart-pl011 3f201000.uart: no DMA platform data
  283. [ 22.064700] cfg80211: Calling CRDA to update world regulatory domain
  284. [ 23.318660] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
  285. [ 23.473958] EXT4-fs (mmcblk0p3): mounted filesystem with ordered data mode. Opts: (null)
  286. [ 25.224597] cfg80211: Calling CRDA to update world regulatory domain
  287. [ 28.384611] cfg80211: Calling CRDA to update world regulatory domain
  288. [ 31.544623] cfg80211: Calling CRDA to update world regulatory domain
  289. [ 34.704573] cfg80211: Calling CRDA to update world regulatory domain
  290. [ 37.864607] cfg80211: Calling CRDA to update world regulatory domain
  291. [ 41.024561] cfg80211: Calling CRDA to update world regulatory domain
  292. [ 44.184593] cfg80211: Calling CRDA to update world regulatory domain
  293. [ 47.344558] cfg80211: Calling CRDA to update world regulatory domain
  294. [ 50.504559] cfg80211: Exceeded CRDA call max attempts. Not calling CRDA
RAW Paste Data