Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- dmesg
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 4.14.0-sunxi (root@armbian) (gcc version 7.1.1 2017 0707 (Linaro GCC 7.1-2017.08)) #19 SMP Fri Nov 24 20:10:50 CET 2017
- [ 0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=50c5387d
- [ 0.000000] CPU: div instructions available: patching division code
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instructio n cache
- [ 0.000000] OF: fdt: Machine model: Cubietech Cubietruck
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] cma: Reserved 16 MiB at 0xbec00000
- [ 0.000000] On node 0 totalpages: 523520
- [ 0.000000] free_area_init_node: node 0, pgdat c0cc0d40, node_mem_map eedf800 0
- [ 0.000000] Normal zone: 1728 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 196608 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 326912 pages, LIFO batch:31
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
- [ 0.000000] random: fast init done
- [ 0.000000] percpu: Embedded 17 pages/cpu @eedb5000 s39628 r8192 d21812 u6963 2
- [ 0.000000] pcpu-alloc: s39628 r8192 d21812 u69632 alloc=17*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 521792
- [ 0.000000] Kernel command line: root=UUID=b9443ecf-c6fa-4ae8-aee6-e156c34ca7 e0 rootwait rootfstype=ext4 console=tty1 console=ttyS0,115200 hdmi.audio=EDID:0 disp.screen0_output_mode=1920x1080p60 panic=10 consoleblank=0 loglevel=1 ubootpa rt=cf359775-01 ubootsource=mmc usb-storage.quirks=0x2537:0x1066:u,0x2537:0x1068: u sunxi_ve_mem_reserve=0 sunxi_g2d_mem_reserve=0 sunxi_fb_mem_reserve=16 cgrou p_enable=memory swapaccount=1
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 2040588K/2094080K available (7168K kernel code, 805K rwda ta, 2152K rodata, 1024K init, 325K bss, 37108K reserved, 16384K cma-reserved, 12 91264K highmem)
- [ 0.000000] Virtual kernel memory layout:
- vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
- vmalloc : 0xf0800000 - 0xff800000 ( 240 MB)
- lowmem : 0xc0000000 - 0xf0000000 ( 768 MB)
- pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- modules : 0xbf800000 - 0xbfe00000 ( 6 MB)
- .text : 0xc0008000 - 0xc0800000 (8160 kB)
- .init : 0xc0b00000 - 0xc0c00000 (1024 kB)
- .data : 0xc0c00000 - 0xc0cc9694 ( 806 kB)
- .bss : 0xc0cd2980 - 0xc0d23ea4 ( 326 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
- [ 0.000000] ftrace: allocating 33452 entries in 66 pages
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
- [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
- [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- [ 0.000000] GIC: Using split EOI/Deactivate mode
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000007] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 43980 46511097ns
- [ 0.000017] Switching to timer-based delay loop, resolution 41ns
- [ 0.000561] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_ idle_ns: 79635851949 ns
- [ 0.000804] clocksource: hstimer: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 12741736309 ns
- [ 0.001040] Console: colour dummy device 80x30
- [ 0.001057] console [tty1] enabled
- [ 0.001092] Calibrating delay loop (skipped), value calculated using timer fr equency.. 48.00 BogoMIPS (lpj=240000)
- [ 0.001103] pid_max: default: 32768 minimum: 301
- [ 0.001276] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.001287] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.002112] CPU: Testing write buffer coherency: ok
- [ 0.002489] /cpus/cpu@0 missing clock-frequency property
- [ 0.002501] /cpus/cpu@1 missing clock-frequency property
- [ 0.002514] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.002901] Setting up static identity map for 0x40100000 - 0x40100054
- [ 0.003032] Hierarchical SRCU implementation.
- [ 0.003893] smp: Bringing up secondary CPUs ...
- [ 0.014614] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.014758] smp: Brought up 1 node, 2 CPUs
- [ 0.014767] SMP: Total of 2 processors activated (96.00 BogoMIPS).
- [ 0.014772] CPU: All CPU(s) started in HYP mode.
- [ 0.014774] CPU: Virtualization extensions available.
- [ 0.015987] devtmpfs: initialized
- [ 0.026005] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 4
- [ 0.026287] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma x_idle_ns: 19112604462750000 ns
- [ 0.026307] futex hash table entries: 512 (order: 3, 32768 bytes)
- [ 0.027126] xor: measuring software checksum speed
- [ 0.124555] arm4regs : 1135.600 MB/sec
- [ 0.224611] 8regs : 676.400 MB/sec
- [ 0.324679] 32regs : 692.800 MB/sec
- [ 0.424742] neon : 1150.800 MB/sec
- [ 0.424746] xor: using function: neon (1150.800 MB/sec)
- [ 0.424843] pinctrl core: initialized pinctrl subsystem
- [ 0.425913] NET: Registered protocol family 16
- [ 0.429387] DMA: preallocated 2048 KiB pool for atomic coherent allocations
- [ 0.430428] cpuidle: using governor ladder
- [ 0.430466] cpuidle: using governor menu
- [ 0.431693] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.431701] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.615110] raid6: int32x1 gen() 170 MB/s
- [ 0.785309] raid6: int32x1 xor() 145 MB/s
- [ 0.955520] raid6: int32x2 gen() 231 MB/s
- [ 1.125537] raid6: int32x2 xor() 175 MB/s
- [ 1.295836] raid6: int32x4 gen() 233 MB/s
- [ 1.465809] raid6: int32x4 xor() 174 MB/s
- [ 1.636166] raid6: int32x8 gen() 223 MB/s
- [ 1.806191] raid6: int32x8 xor() 155 MB/s
- [ 1.976292] raid6: neonx1 gen() 447 MB/s
- [ 2.146400] raid6: neonx1 xor() 417 MB/s
- [ 2.316600] raid6: neonx2 gen() 600 MB/s
- [ 2.486701] raid6: neonx2 xor() 537 MB/s
- [ 2.656849] raid6: neonx4 gen() 719 MB/s
- [ 2.826994] raid6: neonx4 xor() 606 MB/s
- [ 2.997198] raid6: neonx8 gen() 648 MB/s
- [ 3.167315] raid6: neonx8 xor() 548 MB/s
- [ 3.167320] raid6: using algorithm neonx4 gen() 719 MB/s
- [ 3.167323] raid6: .... xor() 606 MB/s, rmw enabled
- [ 3.167328] raid6: using neon recovery algorithm
- [ 3.167729] reg-fixed-voltage ahci-5v: could not find pctldev for node /soc@0 1c00000/pinctrl@01c20800/ahci_pwr_pin@1, deferring probe
- [ 3.167782] reg-fixed-voltage usb0-vbus: could not find pctldev for node /soc @01c00000/pinctrl@01c20800/usb0_vbus_pin@0, deferring probe
- [ 3.169034] SCSI subsystem initialized
- [ 3.169340] libata version 3.00 loaded.
- [ 3.169565] usbcore: registered new interface driver usbfs
- [ 3.169608] usbcore: registered new interface driver hub
- [ 3.169666] usbcore: registered new device driver usb
- [ 3.169890] media: Linux media interface: v0.10
- [ 3.169923] Linux video capture interface: v2.00
- [ 3.169984] pps_core: LinuxPPS API ver. 1 registered
- [ 3.169988] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome tti <giometti@linux.it>
- [ 3.170004] PTP clock support registered
- [ 3.171531] clocksource: Switched to clocksource arch_sys_counter
- [ 3.256943] VFS: Disk quotas dquot_6.6.0
- [ 3.257031] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 3.257913] simple-framebuffer bfd00000.framebuffer: framebuffer at 0xbfd0000 0, 0x300000 bytes, mapped to 0xf0b00000
- [ 3.257925] simple-framebuffer bfd00000.framebuffer: format=x8r8g8b8, mode=10 24x768x32, linelength=4096
- [ 3.274328] Console: switching to colour frame buffer device 128x48
- [ 3.289990] simple-framebuffer bfd00000.framebuffer: fb0: simplefb registered !
- [ 3.297466] NET: Registered protocol family 2
- [ 3.298137] TCP established hash table entries: 8192 (order: 3, 32768 bytes)
- [ 3.298231] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
- [ 3.298355] TCP: Hash tables configured (established 8192 bind 8192)
- [ 3.298481] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 3.298542] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 3.298798] NET: Registered protocol family 1
- [ 3.299331] RPC: Registered named UNIX socket transport module.
- [ 3.299338] RPC: Registered udp transport module.
- [ 3.299340] RPC: Registered tcp transport module.
- [ 3.299345] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 3.299617] Trying to unpack rootfs image as initramfs...
- [ 3.621387] Freeing initrd memory: 4636K
- [ 3.622270] hw perfevents: no interrupt-affinity property for /pmu, guessing.
- [ 3.622587] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counter s available
- [ 3.623988] Initialise system trusted keyrings
- [ 3.624257] workingset: timestamp_bits=14 max_order=19 bucket_order=5
- [ 3.629244] zbud: loaded
- [ 3.631659] NFS: Registering the id_resolver key type
- [ 3.631693] Key type id_resolver registered
- [ 3.631697] Key type id_legacy registered
- [ 3.631712] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 3.631716] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
- [ 3.632830] JFS: nTxBlock = 8192, nTxLock = 65536
- [ 3.649976] Key type asymmetric registered
- [ 3.650050] bounce: pool size: 64 pages
- [ 3.650157] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2 48)
- [ 3.650307] io scheduler noop registered
- [ 3.650313] io scheduler deadline registered
- [ 3.650603] io scheduler cfq registered (default)
- [ 3.651478] sun4i-usb-phy 1c13400.phy: could not find pctldev for node /soc@0 1c00000/pinctrl@01c20800/usb0_id_detect_pin@0, deferring probe
- [ 3.654924] sun4i-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
- [ 3.708146] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
- [ 3.710652] console [ttyS0] disabled
- [ 3.730843] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 46, base_baud = 15 00000) is a U6_16550A
- [ 3.730909] console [ttyS0] enabled
- [ 3.734887] brd: module loaded
- [ 3.741126] loop: module loaded
- [ 3.743289] libphy: Fixed MDIO Bus: probed
- [ 3.743908] sun7i-dwmac 1c50000.ethernet: PTP uses main clock
- [ 3.743919] sun7i-dwmac 1c50000.ethernet: no reset control found
- [ 3.743954] sun7i-dwmac 1c50000.ethernet: no regulator found
- [ 3.744002] sun7i-dwmac 1c50000.ethernet: Ring mode enabled
- [ 3.744009] sun7i-dwmac 1c50000.ethernet: DMA HW capability register supporte d
- [ 3.744016] sun7i-dwmac 1c50000.ethernet: Normal descriptors
- [ 3.762452] libphy: stmmac: probed
- [ 3.762472] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL82 11E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
- [ 3.762481] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL82 11E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
- [ 3.763470] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.763477] ehci-platform: EHCI generic platform driver
- [ 3.763896] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.763933] ohci-platform: OHCI generic platform driver
- [ 3.764331] usbcore: registered new interface driver usb-storage
- [ 3.765411] sunxi-rtc 1c20d00.rtc: rtc core: registered rtc-sunxi as rtc0
- [ 3.765420] sunxi-rtc 1c20d00.rtc: RTC enabled
- [ 3.765556] i2c /dev entries driver
- [ 3.766497] axp20x-i2c 0-0034: AXP20x variant AXP209 found
- [ 3.774437] axp20x-gpio axp20x-gpio: AXP209 GPIO driver loaded
- [ 3.782698] input: axp20x-pek as /devices/platform/soc@01c00000/1c2ac00.i2c/i 2c-0/0-0034/axp20x-pek/input/input0
- [ 3.783370] ldo1: supplied by regulator-dummy
- [ 3.783630] ldo2: supplied by regulator-dummy
- [ 3.784669] ldo3: supplied by regulator-dummy
- [ 3.785278] ldo4: supplied by regulator-dummy
- [ 3.785473] ldo5: supplied by regulator-dummy
- [ 3.786056] dcdc2: supplied by regulator-dummy
- [ 3.786695] dcdc3: supplied by regulator-dummy
- [ 3.788091] axp20x-i2c 0-0034: AXP20X driver loaded
- [ 3.791089] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, now ayout=0)
- [ 3.793076] sunxi-mmc 1c0f000.mmc: Got CD GPIO
- [ 3.851787] sunxi-mmc 1c0f000.mmc: base:0xf0acf000 irq:27
- [ 3.855472] ledtrig-cpu: registered to indicate activity on CPUs
- [ 3.855558] hidraw: raw HID events driver (C) Jiri Kosina
- [ 3.855711] usbcore: registered new interface driver usbhid
- [ 3.855715] usbhid: USB HID core driver
- [ 3.856082] Initializing XFRM netlink socket
- [ 3.856589] NET: Registered protocol family 10
- [ 3.879960] Segment Routing with IPv6
- [ 3.880077] NET: Registered protocol family 17
- [ 3.880110] NET: Registered protocol family 15
- [ 3.880181] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
- [ 3.880236] 8021q: 802.1Q VLAN Support v1.8
- [ 3.880283] Key type dns_resolver registered
- [ 3.880729] Registering SWP/SWPB emulation handler
- [ 3.881443] registered taskstats version 1
- [ 3.881450] Loading compiled-in X.509 certificates
- [ 3.881656] zswap: loaded using pool lzo/zbud
- [ 3.883468] Btrfs loaded, crc32c=crc32c-generic
- [ 3.892101] Key type encrypted registered
- [ 3.907548] mmc0: host does not support reading read-only switch, assuming wr ite-enable
- [ 3.910014] mmc0: new high speed SDHC card at address 1234
- [ 3.910694] mmcblk0: mmc0:1234 SA16G 14.6 GiB
- [ 3.912405] mmcblk0: p1
- [ 4.001636] ahci-sunxi 1c18000.sata: controller can't do PMP, turning off CAP _PMP
- [ 4.001676] ahci-sunxi 1c18000.sata: SSS flag set, parallel bus scan disabled
- [ 4.001705] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0 x1 impl platform mode
- [ 4.001718] ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo only pio slum part ccc
- [ 4.002713] scsi host0: ahci-sunxi
- [ 4.002952] ata1: SATA max UDMA/133 mmio [mem 0x01c18000-0x01c18fff] port 0x1 00 irq 33
- [ 4.005640] alloc_contig_range: [bee01, bee02) PFNs busy
- [ 4.007378] of_cfs_init
- [ 4.007486] of_cfs_init: OK
- [ 4.007672] vcc3v0: disabling
- [ 4.007680] vcc5v0: disabling
- [ 4.007703] usb0-vbus: disabling
- [ 4.007708] usb1-vbus: disabling
- [ 4.007716] usb2-vbus: disabling
- [ 4.332967] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 4.334911] ata1.00: supports DRM functions and may not be fully accessible
- [ 4.334925] ata1.00: ATA-9: Samsung SSD 840 EVO 120GB, EXT0BB6Q, max UDMA/133
- [ 4.334932] ata1.00: 234441648 sectors, multi 1: LBA48 NCQ (depth 31/32)
- [ 4.335587] ata1.00: supports DRM functions and may not be fully accessible
- [ 4.336025] ata1.00: configured for UDMA/133
- [ 4.336699] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 840 BB6Q PQ : 0 ANSI: 5
- [ 4.337959] sd 0:0:0:0: [sda] 234441648 512-byte logical blocks: (120 GB/112 GiB)
- [ 4.338051] sd 0:0:0:0: [sda] Write Protect is off
- [ 4.338062] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 4.338184] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does n't support DPO or FUA
- [ 4.338779] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 4.340270] sda: sda1
- [ 4.341104] alloc_contig_range: [bee01, bee02) PFNs busy
- [ 4.341150] alloc_contig_range: [bee02, bee03) PFNs busy
- [ 4.342154] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 4.344466] Freeing unused kernel memory: 1024K
- [ 4.864093] sunxi-mmc 1c12000.mmc: allocated mmc-pwrseq
- [ 4.921624] sunxi-mmc 1c12000.mmc: base:0xf1322000 irq:28
- [ 4.943746] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 4.946913] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 4.950020] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 4.954798] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 4.975751] mmc1: new high speed SDIO card at address 0001
- [ 6.324072] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
- [ 6.957991] systemd[1]: System time before build time, advancing clock.
- [ 6.999662] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 7.027503] systemd[1]: systemd 232 running in system mode. (+PAM +AUDIT +SEL INUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL + XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN)
- [ 7.028093] systemd[1]: Detected architecture arm.
- [ 7.073671] systemd[1]: Set hostname to <cubietruck>.
- [ 7.792397] systemd[1]: Listening on udev Control Socket.
- [ 7.822010] systemd[1]: Listening on fsck to fsckd communication Socket.
- [ 7.852136] systemd[1]: Started Dispatch Password Requests to Console Directo ry Watch.
- [ 7.882016] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 7.916878] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
- [ 7.941990] systemd[1]: Listening on udev Kernel Socket.
- [ 7.972554] systemd[1]: Created slice User and Session Slice.
- [ 8.278949] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43362-sdi o.bin for chip 0x00a962(43362) rev 0x000001
- [ 8.339398] Bluetooth: Core ver 2.22
- [ 8.339507] NET: Registered protocol family 31
- [ 8.339511] Bluetooth: HCI device and connection manager initialized
- [ 8.339533] Bluetooth: HCI socket layer initialized
- [ 8.339545] Bluetooth: L2CAP socket layer initialized
- [ 8.339583] Bluetooth: SCO socket layer initialized
- [ 8.352163] Bluetooth: RFCOMM TTY layer initialized
- [ 8.352195] Bluetooth: RFCOMM socket layer initialized
- [ 8.352229] Bluetooth: RFCOMM ver 1.11
- [ 8.362672] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 8.362700] Bluetooth: HIDP socket layer initialized
- [ 8.378697] Ethernet Channel Bonding Driver: v3.7.1 (April 27, 2011)
- [ 8.471050] random: crng init done
- [ 8.557246] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount- ro
- [ 8.603363] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Apr 22 2 013 14:50:00 version 5.90.195.89.6 FWID 01-b30a427d
- [ 9.249925] Adding 131068k swap on /var/swap. Priority:-2 extents:2 across:1 39260k SSFS
- [ 10.369979] sun4i-ss 1c15000.crypto-engine: Die ID 0
- [ 10.535342] lirc_dev: IR Remote Control driver registered, major 245
- [ 10.547953] IR LIRC bridge handler initialized
- [ 10.548835] Registered IR keymap rc-empty
- [ 10.548996] rc rc0: sunxi-ir as /devices/platform/soc@01c00000/1c21800.ir/rc/ rc0
- [ 10.549167] input: sunxi-ir as /devices/platform/soc@01c00000/1c21800.ir/rc/r c0/input1
- [ 10.562906] rc rc0: lirc_dev: driver ir-lirc-codec (sunxi-ir) registered at m inor = 0
- [ 10.563116] sunxi-ir 1c21800.ir: initialized sunXi IR driver
- [ 10.642843] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok
- [ 10.710293] ehci-platform 1c14000.usb: EHCI Host Controller
- [ 10.710338] ehci-platform 1c14000.usb: new USB bus registered, assigned bus n umber 1
- [ 10.713171] ehci-platform 1c14000.usb: irq 30, io mem 0x01c14000
- [ 10.731679] asoc-simple-card sound: dit-hifi <-> 1c21000.spdif mapping ok
- [ 10.741666] ehci-platform 1c14000.usb: USB 2.0 started, EHCI 1.00
- [ 10.742251] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 10.742261] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
- [ 10.742267] usb usb1: Product: EHCI Host Controller
- [ 10.742273] usb usb1: Manufacturer: Linux 4.14.0-sunxi ehci_hcd
- [ 10.742279] usb usb1: SerialNumber: 1c14000.usb
- [ 10.743031] hub 1-0:1.0: USB hub found
- [ 10.743103] hub 1-0:1.0: 1 port detected
- [ 10.744174] ehci-platform 1c1c000.usb: EHCI Host Controller
- [ 10.744215] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus n umber 2
- [ 10.745863] ehci-platform 1c1c000.usb: irq 34, io mem 0x01c1c000
- [ 10.771677] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
- [ 10.772011] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 10.772020] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
- [ 10.772026] usb usb2: Product: EHCI Host Controller
- [ 10.772032] usb usb2: Manufacturer: Linux 4.14.0-sunxi ehci_hcd
- [ 10.772038] usb usb2: SerialNumber: 1c1c000.usb
- [ 10.772849] hub 2-0:1.0: USB hub found
- [ 10.772921] hub 2-0:1.0: 1 port detected
- [ 10.774001] ohci-platform 1c14400.usb: Generic Platform OHCI controller
- [ 10.774154] ohci-platform 1c14400.usb: new USB bus registered, assigned bus n umber 3
- [ 10.776024] ohci-platform 1c14400.usb: irq 31, io mem 0x01c14400
- [ 10.848794] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 10.848807] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
- [ 10.848813] usb usb3: Product: Generic Platform OHCI controller
- [ 10.848820] usb usb3: Manufacturer: Linux 4.14.0-sunxi ohci_hcd
- [ 10.848825] usb usb3: SerialNumber: 1c14400.usb
- [ 10.849571] hub 3-0:1.0: USB hub found
- [ 10.849655] hub 3-0:1.0: 1 port detected
- [ 10.850727] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
- [ 10.850765] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus n umber 4
- [ 10.854989] ohci-platform 1c1c400.usb: irq 35, io mem 0x01c1c400
- [ 10.928839] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 10.928852] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
- [ 10.928858] usb usb4: Product: Generic Platform OHCI controller
- [ 10.928864] usb usb4: Manufacturer: Linux 4.14.0-sunxi ohci_hcd
- [ 10.928870] usb usb4: SerialNumber: 1c1c400.usb
- [ 10.929622] hub 4-0:1.0: USB hub found
- [ 10.929690] hub 4-0:1.0: 1 port detected
- [ 10.930799] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto su pply vcc not found, using dummy regulator
- [ 10.931421] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
- [ 10.931439] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 5
- [ 10.943701] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
- [ 10.943713] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber= 1
- [ 10.943719] usb usb5: Product: MUSB HDRC host driver
- [ 10.943725] usb usb5: Manufacturer: Linux 4.14.0-sunxi musb-hcd
- [ 10.943731] usb usb5: SerialNumber: musb-hdrc.1.auto
- [ 10.944497] hub 5-0:1.0: USB hub found
- [ 10.945473] hub 5-0:1.0: 1 port detected
- [ 11.111946] usb 1-1: new high-speed USB device number 2 using ehci-platform
- [ 11.195968] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
- [ 11.312406] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
- [ 11.312419] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 11.312425] usb 1-1: Product: USB 2.0 Hub
- [ 11.313358] hub 1-1:1.0: USB hub found
- [ 11.313498] hub 1-1:1.0: 4 ports detected
- [ 11.551684] usb 4-1: new full-speed USB device number 2 using ohci-platform
- [ 11.641694] usb 1-1.1: new high-speed USB device number 3 using ehci-platform
- [ 11.793389] usb 1-1.1: New USB device found, idVendor=2040, idProduct=0265
- [ 11.793403] usb 1-1.1: New USB device strings: Mfr=3, Product=1, SerialNumber =2
- [ 11.793409] usb 1-1.1: Product: dualHD
- [ 11.793415] usb 1-1.1: Manufacturer: HCW
- [ 11.793421] usb 1-1.1: SerialNumber: 0011569275
- [ 11.826784] usb 4-1: New USB device found, idVendor=03eb, idProduct=204b
- [ 11.826797] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 11.826803] usb 4-1: Product: CUL433
- [ 11.826810] usb 4-1: Manufacturer: busware.de
- [ 11.891799] usb 1-1.3: new full-speed USB device number 4 using ehci-platform
- [ 12.049015] usb 1-1.3: New USB device found, idVendor=0403, idProduct=6001
- [ 12.049029] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber =3
- [ 12.049036] usb 1-1.3: Product: FT232R USB UART
- [ 12.049043] usb 1-1.3: Manufacturer: FTDI
- [ 12.049049] usb 1-1.3: SerialNumber: A7031FBC
- [ 12.151689] usb 1-1.4: new high-speed USB device number 5 using ehci-platform
- [ 12.303189] usb 1-1.4: New USB device found, idVendor=1a40, idProduct=0101
- [ 12.303203] usb 1-1.4: New USB device strings: Mfr=0, Product=1, SerialNumber =0
- [ 12.303209] usb 1-1.4: Product: USB 2.0 Hub
- [ 12.304494] hub 1-1.4:1.0: USB hub found
- [ 12.304680] hub 1-1.4:1.0: 4 ports detected
- [ 12.367503] RTL8211E Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL82 11E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
- [ 12.374715] sun7i-dwmac 1c50000.ethernet eth0: RX IPC Checksum Offload disabl ed
- [ 12.374734] sun7i-dwmac 1c50000.ethernet eth0: No MAC Management Counters ava ilable
- [ 12.374743] sun7i-dwmac 1c50000.ethernet eth0: PTP not supported by HW
- [ 12.375071] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 12.621662] usb 1-1.4.4: new full-speed USB device number 6 using ehci-platfo rm
- [ 12.789405] usb 1-1.4.4: New USB device found, idVendor=1b1f, idProduct=c00f
- [ 12.789418] usb 1-1.4.4: New USB device strings: Mfr=4, Product=14, SerialNum ber=36
- [ 12.789425] usb 1-1.4.4: Product: HM-CFG-USB
- [ 12.789430] usb 1-1.4.4: Manufacturer: eQ-3
- [ 12.789436] usb 1-1.4.4: SerialNumber: MEQ0232057
- [ 12.794436] hid-generic 0003:1B1F:C00F.0001: hiddev96,hidraw0: USB HID v1.10 Device [eQ-3 HM-CFG-USB] on usb-1c14000.usb-1.4.4/input0
- [ 13.060582] em28xx 1-1.1:1.0: New device HCW dualHD @ 480 Mbps (2040:0265, in terface 0, class 0)
- [ 13.060596] em28xx 1-1.1:1.0: DVB interface 0 found: isoc
- [ 13.066966] em28xx 1-1.1:1.0: chip ID is em28174
- [ 13.082183] usbcore: registered new interface driver usbserial
- [ 13.082243] usbcore: registered new interface driver usbserial_generic
- [ 13.082291] usbserial: USB Serial support registered for generic
- [ 13.107056] usbcore: registered new interface driver ftdi_sio
- [ 13.107123] usbserial: USB Serial support registered for FTDI USB Serial Devi ce
- [ 13.107560] ftdi_sio 1-1.3:1.0: FTDI USB Serial Device converter detected
- [ 13.110331] usb 1-1.3: Detected FT232RL
- [ 13.112025] cdc_acm 4-1:1.0: ttyACM0: USB ACM device
- [ 13.113271] usb 1-1.3: FTDI USB Serial Device converter now attached to ttyUS B0
- [ 13.113285] usbcore: registered new interface driver cdc_acm
- [ 13.113291] cdc_acm: USB Abstract Control Model driver for USB modems and ISD N adapters
- [ 13.442626] sun7i-dwmac 1c50000.ethernet eth0: Link is Up - 1Gbps/Full - flow control off
- [ 13.442684] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
- [ 13.592857] systemd[1]: Started Raise network interfaces.
- [ 13.896610] systemd[1]: Reached target Sound Card.
- [ 14.381379] em28xx 1-1.1:1.0: EEPROM ID = 26 00 01 00, EEPROM hash = 0x63e2c3 c8
- [ 14.381390] em28xx 1-1.1:1.0: EEPROM info:
- [ 14.381397] em28xx 1-1.1:1.0: microcode start address = 0x0004, boot c onfiguration = 0x01
- [ 14.398508] em28xx 1-1.1:1.0: AC97 audio (5 sample rates)
- [ 14.398520] em28xx 1-1.1:1.0: 500mA max power
- [ 14.398532] em28xx 1-1.1:1.0: Table at offset 0x27, strings=0x0e6a, 0x 1888, 0x087e
- [ 14.399179] em28xx 1-1.1:1.0: Identified as Hauppauge WinTV-dualHD DVB (card= 99)
- [ 14.415529] tveeprom: Hauppauge model 204109, rev B3I6, serial# 11569275
- [ 14.415539] tveeprom: tuner model is SiLabs Si2157 (idx 186, type 4)
- [ 14.415546] tveeprom: TV standards PAL(B/G) NTSC(M) PAL(I) SECAM(L/L') PAL(D/ D1/K) ATSC/DVB Digital (eeprom 0xfc)
- [ 14.415551] tveeprom: audio processor is None (idx 0)
- [ 14.415555] tveeprom: has no radio, has IR receiver, has no IR transmitter
- [ 14.415570] em28xx 1-1.1:1.0: dvb set to isoc mode.
- [ 14.416095] usbcore: registered new interface driver em28xx
- [ 14.469910] em28xx 1-1.1:1.0: Binding DVB extension
- [ 14.510626] i2c i2c-4: Added multiplexed i2c bus 5
- [ 14.510643] si2168 4-0064: Silicon Labs Si2168-B40 successfully identified
- [ 14.510650] si2168 4-0064: firmware version: B 4.0.2
- [ 14.559653] si2157 5-0060: Silicon Labs Si2147/2148/2157/2158 successfully at tached
- [ 14.559825] dvbdev: DVB: registering new adapter (1-1.1:1.0)
- [ 14.559846] em28xx 1-1.1:1.0: DVB: registering adapter 0 frontend 0 (Silicon Labs Si2168)...
- [ 14.562067] em28xx 1-1.1:1.0: DVB extension successfully initialized
- [ 14.562081] em28xx: Registered (Em28xx dvb Extension) extension
- [ 14.595233] em28xx 1-1.1:1.0: Registering input extension
- [ 14.687512] Registered IR keymap rc-hauppauge
- [ 14.698208] rc rc1: 1-1.1:1.0 IR as /devices/platform/soc@01c00000/1c14000.us b/usb1/1-1/1-1.1/1-1.1:1.0/rc/rc1
- [ 14.698448] input: 1-1.1:1.0 IR as /devices/platform/soc@01c00000/1c14000.usb /usb1/1-1/1-1.1/1-1.1:1.0/rc/rc1/input2
- [ 14.699231] em28xx 1-1.1:1.0: Input extension successfully initialized
- [ 14.699244] em28xx: Registered (Em28xx Input Extension) extension
- [ 15.179764] systemd[1]: Started Armbian enhanced Log2Ram.
- [ 15.233977] systemd[1]: Starting Journal Service...
- [ 15.440622] systemd[1]: Started Journal Service.
- [ 15.528817] systemd-journald[558]: Received request to flush runtime journal from PID 1
- [ 18.859688] si2168 4-0064: downloading firmware from file 'dvb-demod-si2168-b 40-01.fw'
- [ 19.383126] si2168 4-0064: firmware version: B 4.0.11
- [ 19.391010] si2157 5-0060: found a 'Silicon Labs Si2157-A30'
- [ 19.454633] si2157 5-0060: firmware version: 3.0.5
- [ 19.454730] em28xx 1-1.1:1.0: DVB: adapter 0 frontend 0 frequency 0 out of ra nge (42000000..870000000)
- [ 20.201826] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 20.297401] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
- [ 22.721661] brcmfmac: brcmf_p2p_create_p2pdev: timeout occurred
- [ 22.721687] brcmfmac: brcmf_cfg80211_add_iface: add iface p2p-dev-wlan0 type 10 failed: err=-5
- [ 22.770541] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement