API tools faq
paste
voltage

smart-bad

voltage
Sep 22nd, 2019
208
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.31 KB | None | 0 0
raw download clone embed print report
  1. [root@fserv1]# smartctl -a /dev/sda
  2. smartctl 6.5 2016-05-07 r4318 [armv5tel-linux-4.4.86] (local build)
  3. Copyright (C) 2002-16, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Model Family: Seagate Barracuda 7200.14 (AF)
  7. Device Model: ST3000DM001-1CH166
  8. Serial Number: Z1F1XEAX
  9. LU WWN Device Id: 5 000c50 04f4135c9
  10. Firmware Version: CC24
  11. User Capacity: 3,000,592,982,016 bytes [3.00 TB]
  12. Sector Sizes: 512 bytes logical, 4096 bytes physical
  13. Rotation Rate: 7200 rpm
  14. Form Factor: 3.5 inches
  15. Device is: In smartctl database [for details use: -P show]
  16. ATA Version is: ATA8-ACS T13/1699-D revision 4
  17. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 1.5 Gb/s)
  18. Local Time is: Sun Sep 22 18:14:47 2019 MSD
  19. SMART support is: Available - device has SMART capability.
  20. SMART support is: Enabled
  21.  
  22. === START OF READ SMART DATA SECTION ===
  23. SMART overall-health self-assessment test result: PASSED
  24. See vendor-specific Attribute list for marginal Attributes.
  25.  
  26. General SMART Values:
  27. Offline data collection status: (0x00) Offline data collection activity
  28. was never started.
  29. Auto Offline Data Collection: Disabled.
  30. Self-test execution status: ( 0) The previous self-test routine completed
  31. without error or no self-test has ever
  32. been run.
  33. Total time to complete Offline
  34. data collection: ( 584) seconds.
  35. Offline data collection
  36. capabilities: (0x73) SMART execute Offline immediate.
  37. Auto Offline data collection on/off support.
  38. Suspend Offline collection upon new
  39. command.
  40. No Offline surface scan supported.
  41. Self-test supported.
  42. Conveyance Self-test supported.
  43. Selective Self-test supported.
  44. SMART capabilities: (0x0003) Saves SMART data before entering
  45. power-saving mode.
  46. Supports SMART auto save timer.
  47. Error logging capability: (0x01) Error logging supported.
  48. General Purpose Logging supported.
  49. Short self-test routine
  50. recommended polling time: ( 1) minutes.
  51. Extended self-test routine
  52. recommended polling time: ( 336) minutes.
  53. Conveyance self-test routine
  54. recommended polling time: ( 2) minutes.
  55. SCT capabilities: (0x3085) SCT Status supported.
  56.  
  57. SMART Attributes Data Structure revision number: 10
  58. Vendor Specific SMART Attributes with Thresholds:
  59. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  60. 1 Raw_Read_Error_Rate 0x000f 098 098 006 Pre-fail Always - 129704307
  61. 3 Spin_Up_Time 0x0003 094 093 000 Pre-fail Always - 0
  62. 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 130
  63. 5 Reallocated_Sector_Ct 0x0033 100 100 010 Pre-fail Always - 8
  64. 7 Seek_Error_Rate 0x000f 059 054 030 Pre-fail Always - 38661809832
  65. 9 Power_On_Hours 0x0032 048 048 000 Old_age Always - 45657
  66. 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0
  67. 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 126
  68. 183 Runtime_Bad_Block 0x0032 017 017 000 Old_age Always - 83
  69. 184 End-to-End_Error 0x0032 099 099 099 Old_age Always FAILING_NOW 1
  70. 187 Reported_Uncorrect 0x0032 097 097 000 Old_age Always - 3
  71. 188 Command_Timeout 0x0032 100 097 000 Old_age Always - 50 52 54
  72. 189 High_Fly_Writes 0x003a 099 099 000 Old_age Always - 1
  73. 190 Airflow_Temperature_Cel 0x0022 062 049 045 Old_age Always - 38 (Min/Max 26/42)
  74. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0
  75. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 113
  76. 193 Load_Cycle_Count 0x0032 065 065 000 Old_age Always - 71446
  77. 194 Temperature_Celsius 0x0022 038 051 000 Old_age Always - 38 (0 13 0 0 0)
  78. 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 32
  79. 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 32
  80. 199 UDMA_CRC_Error_Count 0x003e 200 199 000 Old_age Always - 341
  81. 240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 3873h+55m+25.571s
  82. 241 Total_LBAs_Written 0x0000 100 253 000 Old_age Offline - 10589160102
  83. 242 Total_LBAs_Read 0x0000 100 253 000 Old_age Offline - 16914875853
  84.  
  85. SMART Error Log Version: 1
  86. ATA Error Count: 3
  87. CR = Command Register [HEX]
  88. FR = Features Register [HEX]
  89. SC = Sector Count Register [HEX]
  90. SN = Sector Number Register [HEX]
  91. CL = Cylinder Low Register [HEX]
  92. CH = Cylinder High Register [HEX]
  93. DH = Device/Head Register [HEX]
  94. DC = Device Command Register [HEX]
  95. ER = Error register [HEX]
  96. ST = Status register [HEX]
  97. Powered_Up_Time is measured from power on, and printed as
  98. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  99. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  100.  
  101. Error 3 occurred at disk power-on lifetime: 45641 hours (1901 days + 17 hours)
  102. When the command that caused the error occurred, the device was active or idle.
  103.  
  104. After command completion occurred, registers were:
  105. ER ST SC SN CL CH DH
  106. -- -- -- -- -- -- --
  107. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  108.  
  109. Commands leading to the command that caused the error were:
  110. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  111. -- -- -- -- -- -- -- -- ---------------- --------------------
  112. 60 00 00 ff ff ff 4f 00 13d+09:32:33.408 READ FPDMA QUEUED
  113. 60 00 00 ff ff ff 4f 00 13d+09:32:33.382 READ FPDMA QUEUED
  114. 60 00 00 ff ff ff 4f 00 13d+09:32:33.132 READ FPDMA QUEUED
  115. 60 00 00 ff ff ff 4f 00 13d+09:32:33.097 READ FPDMA QUEUED
  116. 60 00 00 ff ff ff 4f 00 13d+09:32:32.690 READ FPDMA QUEUED
  117.  
  118. Error 2 occurred at disk power-on lifetime: 45319 hours (1888 days + 7 hours)
  119. When the command that caused the error occurred, the device was active or idle.
  120.  
  121. After command completion occurred, registers were:
  122. ER ST SC SN CL CH DH
  123. -- -- -- -- -- -- --
  124. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  125.  
  126. Commands leading to the command that caused the error were:
  127. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  128. -- -- -- -- -- -- -- -- ---------------- --------------------
  129. 60 00 08 b8 91 04 40 00 00:07:53.958 READ FPDMA QUEUED
  130. 60 00 08 ff ff ff 4f 00 00:07:53.958 READ FPDMA QUEUED
  131. 61 00 00 78 ff 01 40 00 00:07:53.957 WRITE FPDMA QUEUED
  132. e5 00 00 00 00 00 00 00 00:07:53.956 CHECK POWER MODE
  133. 27 00 00 00 00 00 e0 00 00:07:53.902 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  134.  
  135. Error 1 occurred at disk power-on lifetime: 45319 hours (1888 days + 7 hours)
  136. When the command that caused the error occurred, the device was active or idle.
  137.  
  138. After command completion occurred, registers were:
  139. ER ST SC SN CL CH DH
  140. -- -- -- -- -- -- --
  141. 40 51 00 ff ff ff 0f Error: UNC at LBA = 0x0fffffff = 268435455
  142.  
  143. Commands leading to the command that caused the error were:
  144. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  145. -- -- -- -- -- -- -- -- ---------------- --------------------
  146. 60 00 08 ff ff ff 4f 00 00:07:44.974 READ FPDMA QUEUED
  147. 60 00 40 c0 3f 05 40 00 00:07:44.973 READ FPDMA QUEUED
  148. 60 00 40 00 61 01 40 00 00:07:44.971 READ FPDMA QUEUED
  149. 60 00 40 c0 60 01 40 00 00:07:44.970 READ FPDMA QUEUED
  150. 60 00 08 ff ff ff 4f 00 00:07:44.759 READ FPDMA QUEUED
  151.  
  152. SMART Self-test log structure revision number 1
  153. No self-tests have been logged. [To run self-tests, use: smartctl -t]
  154.  
  155. SMART Selective self-test log data structure revision number 1
  156. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  157. 1 0 0 Not_testing
  158. 2 0 0 Not_testing
  159. 3 0 0 Not_testing
  160. 4 0 0 Not_testing
  161. 5 0 0 Not_testing
  162. Selective self-test flags (0x0):
  163. After scanning selected spans, do NOT read-scan remainder of disk.
  164. If Selective self-test is pending on power-up, resume after 0 minute delay.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!