dmesg

[10365.469867] wlp3s0: deauthenticating from dc:53:7c:e4:4a:44 by local choice (Reason: 3=DEAUTH_LEAVING)
[10365.481131] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[10365.482288] cfg80211: World regulatory domain updated:
[10365.482293] cfg80211:  DFS Master region: unset
[10365.482295] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[10365.482297] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[10365.482299] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[10365.482301] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[10365.482302] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[10365.482304] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[10365.482306] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[10365.482307] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[10365.482309] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[10367.922200] atkbd serio0: Unknown key pressed (translated set 2, code 0x98 on isa0060/serio0).
[10367.922204] atkbd serio0: Use 'setkeycodes e018 <keycode>' to make it known.
[10367.926315] atkbd serio0: Unknown key released (translated set 2, code 0x98 on isa0060/serio0).
[10367.926319] atkbd serio0: Use 'setkeycodes e018 <keycode>' to make it known.
[10368.861671] PM: Syncing filesystems ... done.
[10369.044567] PM: Preparing system for sleep (mem)
[10369.047152] Freezing user space processes ... (elapsed 0.002 seconds) done.
[10369.049407] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[10369.050512] PM: Suspending system (mem)
[10369.050533] Suspending console(s) (use no_console_suspend to debug)
[10369.051080] sd 5:0:0:0: [sdb] Synchronizing SCSI cache
[10369.051235] sd 4:0:0:0: [sda] Synchronizing SCSI cache
[10369.051760] sd 5:0:0:0: [sdb] Stopping disk
[10369.077836] sd 4:0:0:0: [sda] Stopping disk
[10369.653612] PM: suspend of devices complete after 602.806 msecs
[10369.666574] PM: late suspend of devices complete after 12.952 msecs
[10369.667869] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[10369.667961] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[10369.667978] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[10369.678572] PM: noirq suspend of devices complete after 11.993 msecs
[10369.678747] ACPI: Preparing to enter system sleep state S3
[10369.680641] ACPI : EC: EC stopped
[10369.680641] PM: Saving platform NVS memory
[10369.680674] Disabling non-boot CPUs ...
[10369.682222] smpboot: CPU 1 is now offline
[10369.683702] smpboot: CPU 2 is now offline
[10369.685131] smpboot: CPU 3 is now offline
[10369.688087] ACPI: Low-level resume complete
[10369.688163] ACPI : EC: EC started
[10369.688165] PM: Restoring platform NVS memory
[10369.688809] Enabling non-boot CPUs ...
[10369.688900] x86: Booting SMP configuration:
[10369.688904] smpboot: Booting Node 0 Processor 1 APIC 0x2
[10369.694724]  cache: parent cpu1 should not be sleeping
[10369.695095] CPU1 is up
[10369.695150] smpboot: Booting Node 0 Processor 2 APIC 0x1
[10369.701088]  cache: parent cpu2 should not be sleeping
[10369.701329] CPU2 is up
[10369.701368] smpboot: Booting Node 0 Processor 3 APIC 0x3
[10369.707069]  cache: parent cpu3 should not be sleeping
[10369.707305] CPU3 is up
[10369.716700] ACPI: Waking up from system sleep state S3
[10369.725470] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[10369.726091] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[10369.726684] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[10369.737428] PM: noirq resume of devices complete after 12.338 msecs
[10369.738011] PM: early resume of devices complete after 0.558 msecs
[10369.744132] sd 4:0:0:0: [sda] Starting disk
[10369.744187] sd 5:0:0:0: [sdb] Starting disk
[10369.747750] rtc_cmos 00:04: System wakeup disabled by ACPI
[10369.965645] usb 3-1.5: reset high-speed USB device number 4 using ehci-pci
[10370.044665] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[10370.046659] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[10370.046884] ata6.00: supports DRM functions and may not be fully accessible
[10370.047845] ata6.00: disabling queued TRIM support
[10370.048361] ata6.00: supports DRM functions and may not be fully accessible
[10370.048706] ata3.00: configured for UDMA/133
[10370.048708] ata6.00: disabling queued TRIM support
[10370.048887] ata6.00: configured for UDMA/133
[10370.123680] usb 3-1.3: reset full-speed USB device number 3 using ehci-pci
[10370.210151] PM: resume of devices complete after 472.029 msecs
[10370.210546] PM: Finishing wakeup.
[10370.210547] Restarting tasks ... done.
[10370.223152] Bluetooth: hci0: read Intel version: 3707100100012d0d00
[10370.223157] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq
[10370.377197] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[10370.377634] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[10370.379582] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[10370.379718] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[10370.379961] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[10370.414247] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[10370.496271] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[10370.496507] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[10370.509855] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[10370.512428] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[10370.512671] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[10370.523427] psmouse serio1: synaptics: queried max coordinates: x [..5706], y [..4800]
[10370.622097] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[10370.622337] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[10370.635225] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[10370.693591] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[10371.524996] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[10371.667284] ata5.00: configured for UDMA/133
[10374.054507] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[10377.466308] wlp3s0: authenticate with dc:53:7c:e4:4a:44
[10377.469033] wlp3s0: send auth to dc:53:7c:e4:4a:44 (try 1/3)
[10377.575664] wlp3s0: authenticated
[10377.575867] wlp3s0: associating with AP with corrupt probe response
[10377.576367] wlp3s0: associate with dc:53:7c:e4:4a:44 (try 1/3)
[10377.597755] wlp3s0: RX AssocResp from dc:53:7c:e4:4a:44 (capab=0x411 status=0 aid=2)
[10377.598800] wlp3s0: associated
[10377.598832] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[10380.757700] cfg80211: World regulatory domain updated:
[10380.757704] cfg80211:  DFS Master region: unset
[10380.757705] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[10380.757707] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[10380.757708] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[10380.757709] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[10380.757710] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[10380.757711] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[10380.757712] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[10380.757712] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[10380.757713] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[19867.099794] atkbd serio0: Unknown key pressed (translated set 2, code 0x98 on isa0060/serio0).
[19867.099798] atkbd serio0: Use 'setkeycodes e018 <keycode>' to make it known.
[19867.103688] atkbd serio0: Unknown key released (translated set 2, code 0x98 on isa0060/serio0).
[19867.103692] atkbd serio0: Use 'setkeycodes e018 <keycode>' to make it known.
[19977.224842] wlp3s0: deauthenticating from dc:53:7c:e4:4a:44 by local choice (Reason: 3=DEAUTH_LEAVING)
[19977.263631] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[19977.290901] cfg80211: World regulatory domain updated:
[19977.290906] cfg80211:  DFS Master region: unset
[19977.290907] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[19977.290910] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[19977.290912] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[19977.290914] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[19977.290916] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[19977.290918] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[19977.290920] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[19977.290921] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[19977.290923] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[19980.761452] PM: Syncing filesystems ... done.
[19980.838850] PM: Preparing system for sleep (mem)
[19980.842903] Freezing user space processes ... (elapsed 0.004 seconds) done.
[19980.847070] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[19980.848961] PM: Suspending system (mem)
[19980.849002] Suspending console(s) (use no_console_suspend to debug)
[19980.849608] sd 5:0:0:0: [sdb] Synchronizing SCSI cache
[19980.849743] sd 4:0:0:0: [sda] Synchronizing SCSI cache
[19980.850330] sd 5:0:0:0: [sdb] Stopping disk
[19980.881826] sd 4:0:0:0: [sda] Stopping disk
[19981.456300] PM: suspend of devices complete after 606.893 msecs
[19981.479232] PM: late suspend of devices complete after 22.923 msecs
[19981.480176] ehci-pci 0000:00:1a.0: System wakeup enabled by ACPI
[19981.480204] xhci_hcd 0000:00:14.0: System wakeup enabled by ACPI
[19981.480278] ehci-pci 0000:00:1d.0: System wakeup enabled by ACPI
[19981.490276] PM: noirq suspend of devices complete after 11.039 msecs
[19981.490450] ACPI: Preparing to enter system sleep state S3
[19981.492332] ACPI : EC: EC stopped
[19981.492333] PM: Saving platform NVS memory
[19981.492366] Disabling non-boot CPUs ...
[19981.493911] smpboot: CPU 1 is now offline
[19981.495397] smpboot: CPU 2 is now offline
[19981.496855] smpboot: CPU 3 is now offline
[19981.499792] ACPI: Low-level resume complete
[19981.499870] ACPI : EC: EC started
[19981.499872] PM: Restoring platform NVS memory
[19981.500530] Enabling non-boot CPUs ...
[19981.500619] x86: Booting SMP configuration:
[19981.500623] smpboot: Booting Node 0 Processor 1 APIC 0x2
[19981.506454]  cache: parent cpu1 should not be sleeping
[19981.506825] CPU1 is up
[19981.506880] smpboot: Booting Node 0 Processor 2 APIC 0x1
[19981.512799]  cache: parent cpu2 should not be sleeping
[19981.513039] CPU2 is up
[19981.513079] smpboot: Booting Node 0 Processor 3 APIC 0x3
[19981.518793]  cache: parent cpu3 should not be sleeping
[19981.519028] CPU3 is up
[19981.528425] ACPI: Waking up from system sleep state S3
[19981.537083] xhci_hcd 0000:00:14.0: System wakeup disabled by ACPI
[19981.537792] ehci-pci 0000:00:1d.0: System wakeup disabled by ACPI
[19981.537986] ehci-pci 0000:00:1a.0: System wakeup disabled by ACPI
[19981.549177] PM: noirq resume of devices complete after 12.375 msecs
[19981.549872] PM: early resume of devices complete after 0.669 msecs
[19981.558113] sd 4:0:0:0: [sda] Starting disk
[19981.558182] sd 5:0:0:0: [sdb] Starting disk
[19981.558489] rtc_cmos 00:04: System wakeup disabled by ACPI
[19981.777376] usb 3-1.3: reset full-speed USB device number 3 using ehci-pci
[19981.855355] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[19981.859446] ata3.00: configured for UDMA/133
[19981.862359] ata6: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[19981.862558] ata6.00: supports DRM functions and may not be fully accessible
[19981.863452] ata6.00: disabling queued TRIM support
[19981.863848] ata6.00: supports DRM functions and may not be fully accessible
[19981.864078] ata6.00: disabling queued TRIM support
[19981.864236] ata6.00: configured for UDMA/133
[19981.935432] usb 3-1.5: reset high-speed USB device number 4 using ehci-pci
[19982.021478] PM: resume of devices complete after 471.495 msecs
[19982.021918] PM: Finishing wakeup.
[19982.021919] Restarting tasks ... done.
[19982.038270] Bluetooth: hci0: read Intel version: 3707100100012d0d00
[19982.042062] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.0.1.2d.d.bseq
[19982.183672] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[19982.184170] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
[19982.185845] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[19982.186037] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[19982.186286] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[19982.237248] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[19982.299028] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[19982.299305] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[19982.312822] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[19982.314743] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[19982.314982] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[19982.325168] psmouse serio1: synaptics: queried max coordinates: x [..5706], y [..4800]
[19982.424810] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[19982.425047] iwlwifi 0000:03:00.0: L1 Enabled - LTR Enabled
[19982.438951] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[19982.496564] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[19983.285661] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[19983.421010] ata5.00: configured for UDMA/133
[19985.657742] IPv6: ADDRCONF(NETDEV_UP): wlp3s0: link is not ready
[19988.879778] wlp3s0: authenticate with dc:53:7c:e4:4a:44
[19988.883562] wlp3s0: send auth to dc:53:7c:e4:4a:44 (try 1/3)
[19988.945625] wlp3s0: authenticated
[19988.945818] wlp3s0: associating with AP with corrupt probe response
[19988.945944] wlp3s0: associate with dc:53:7c:e4:4a:44 (try 1/3)
[19988.966856] wlp3s0: RX AssocResp from dc:53:7c:e4:4a:44 (capab=0x411 status=0 aid=6)
[19988.967865] wlp3s0: associated
[19988.967893] IPv6: ADDRCONF(NETDEV_CHANGE): wlp3s0: link becomes ready
[19992.124228] cfg80211: World regulatory domain updated:
[19992.124231] cfg80211:  DFS Master region: unset
[19992.124232] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[19992.124234] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[19992.124235] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[19992.124236] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[19992.124237] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[19992.124238] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[19992.124239] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[19992.124240] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[19992.124241] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[23055.308921] rfkill: input handler enabled
[23070.127277] rfkill: input handler disabled
[23070.303468] CPU3: Core temperature above threshold, cpu clock throttled (total events = 314572)
[23070.303469] CPU0: Package temperature above threshold, cpu clock throttled (total events = 343942)
[23070.303470] CPU2: Package temperature above threshold, cpu clock throttled (total events = 343942)
[23070.303471] CPU1: Core temperature above threshold, cpu clock throttled (total events = 314572)
[23070.303474] CPU1: Package temperature above threshold, cpu clock throttled (total events = 343942)
[23070.303478] CPU3: Package temperature above threshold, cpu clock throttled (total events = 343942)
[23070.306487] CPU1: Core temperature/speed normal
[23070.306487] CPU3: Core temperature/speed normal
[23070.306489] CPU2: Package temperature/speed normal
[23070.306490] CPU0: Package temperature/speed normal
[23070.306490] CPU3: Package temperature/speed normal
[23070.306498] CPU1: Package temperature/speed normal
[23104.963958] mce: [Hardware Error]: Machine check events logged
[24317.739778] CPU3: Core temperature above threshold, cpu clock throttled (total events = 314610)
[24317.739779] CPU1: Core temperature above threshold, cpu clock throttled (total events = 314610)
[24317.739781] CPU1: Package temperature above threshold, cpu clock throttled (total events = 343980)
[24317.739784] CPU0: Package temperature above threshold, cpu clock throttled (total events = 343980)
[24317.739786] CPU2: Package temperature above threshold, cpu clock throttled (total events = 343980)
[24317.739788] CPU3: Package temperature above threshold, cpu clock throttled (total events = 343980)
[24317.740774] CPU3: Core temperature/speed normal
[24317.740775] CPU0: Package temperature/speed normal
[24317.740776] CPU1: Core temperature/speed normal
[24317.740777] CPU2: Package temperature/speed normal
[24317.740778] CPU1: Package temperature/speed normal
[24317.740780] CPU3: Package temperature/speed normal
[24455.272046] mce: [Hardware Error]: Machine check events logged