Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- ================================================================================
- SYSTEM RESTART (Power On Reset) 01/02/00 00:00:01
- Boot Loader
- ===========
- Device Id : MB100AadPE1BUNW S/N C055100442
- CPU : Centillium Palladia P300 (MIPS32 4Kc)
- Boot Version : BOOT4-SEC-V3.6R2E17
- Created on : 13/11/08 16:50:41
- OS Version : 5.5.1
- BSP version : 1.0/1
- Bus Freq : 98MHz Core Freq : 197MHz CPLD Index : 3
- Ram size : 32Mo Flash size : 16Mo Extended Flash size : 16Mo
- Ram disk : 0Mo Flash disk : 16Mo (Extended)
- Starting the Flash File System (V2.0 AD)
- Flash File System OK - 1327104 free bytes (8.0%)
- Starting the Ram File System
- Ram File System OK
- Starting recovery timer
- Stopping recovery timer
- Loading FEC driver
- Attached TCP/IP interface to FastEthernet unit 0
- Attaching loopback interface lo0
- Adding 5918 symbols for standalone
- IP fast forwarding running
- Boot Strategy Application is not used
- Quick auto-boot...
- Booting file flash:/BSA/binaries/oneosrun from disk
- Stopping FastEthernet0
- File size = 7575761
- Software version ONEOS4-VOIP_SIP_FT-V4.3R4E45 created on 05/09/13 13:42:47
- Loading package [CLI&const] in extended flash ... already copied ... done
- Loading package [Main App.] in RAM ... done
- Starting at 0x80010000...
- Application Software
- ====================
- Device Id : MB100AadPE1BUNW S/N C055100442
- CPU : Centillium Palladia P300 (MIPS32 4Kc)
- Software Version : ONEOS4-VOIP_SIP_FT-V4.3R4E45
- Created on : 05/09/13 13:42:47
- OS Version : VxWorks5.5.1
- BSP version : 1.0/1
- Bus Freq : 98MHz Core Freq : 197MHz CPLD Index : 3
- Ram size : 32Mo Flash size : 16Mo Extended Flash size : 16Mo
- Ram disk : 1Mo Flash disk : 16Mo (Extended)
- Ethernet : x Switch : x Adsl : x ISDN : x
- M Ext : x Ipsec : x Dsp : x TCXO :
- Local : FAST ETHERNET + SWITCH ETHERNET / 4 ports
- Uplink : ADSL / annex A / dying gasp
- Gprs :
- BRI : (5/0)
- M Ext : MF100
- PSTN : (2/0)
- FXS : (5/1, 5/2, 5/3, 5/4)
- FXO : (5/5)
- Loading FEC driver
- FastEthernet controller 1 started
- Loading FEC driver
- FastEthernet controller 0 started
- Attaching loopback interface lo0
- Successful ATM initialization
- Verify DSL connection
- Starting the Flash File System (V2.0 AD)
- Flash File System OK - 1327104 free bytes (8.0%)
- disk cache disabled
- Starting the Ram File System
- Ram File System OK
- Adding 1169 symbols for standalone
- IP fast forwarding running
- Fast UDP Socket interface started (128)
- TCP/IP attached to FastEthernet controller 1
- TCP/IP attached to FastEthernet controller 0
- FastEthernet switch initialized
- no isdn backup board.
- 1 BRI port(s) detected -----
- no hardware limitation (8 max) voice com.
- voice default rtp port-range: min=16384 max=16402 (18)
- 4 FXS port(s) detected -----
- 1 FXO port(s) detected -----
- SLA is not present.
- Scan PCI bus...
- bus:0, dev:0 Vendor id : 0x1511 Device id : 0x0003
- bus:0, dev:6 Vendor id : 0x168c Device id : 0x0013
- bus:0, dev:7 Vendor id : 0x104c Device id : 0xa106
- Loading C62 Boot software (23 Kb) on DSP 0
- 0 :DSP 62xx revision 3 Memory 8192 Ko : OK
- Loading C62 software (775 Kb) on DSP 0
- 0 :DSP software VVRREE:40553BF7
- 1 dsp found.
- Voice Initialisation OK...
- wlan0 board detected.
- Boot Strategy Application is not used
- Zebra routing software, Copyright (C) 2000 Kunihiro Ishiguro. Free software. Check 'show ip {ospf|bgp} license' for license information.
- Loading configuration flash:/BSA/config/bsaStart.cfg
- Configuration file flash:/BSA/config/bsaStart.cfg not found
- Username:admin
- Password:
- one100>help
- ap-controller - Execute ap-controller settings
- atm-capture - Capture ATM traffic on a specific PVC
- auto-call - make an automatic call
- auto-update - Start/Stop AutoUpdate sequence
- boot - Configure the boot application
- boot-user - Boot user access rights management
- capture - Set protocol analyser filters
- cellular-radio - cellular-radio
- certificate - certificate manipulation
- configure - Enter configuration mode
- copy - Copy <URL Source> <URL Destination>
- cwmp - Start/Stop CWMP session
- debug - Debug
- decrypt - Encrypt file
- disable - Turn off privileged commands
- dot11 - 802.11 management commands
- edge-modem - edge-modem
- enable - Reserved
- encrypt - Encrypt file
- erase - Erase running-config and reboot
- exec - Execute a file
- exit - Exit intermediate mode
- factory - factory <lock | unlock | fxs>
- factory-conf - factory-conf <serialnumber> <MACaddr> [<password>]
- ftp - Enter ftp session
- hostname - Get host name
- ibc - IBC commands
- ibc-user-configuration - Ibc services configuration
- isdn - helpfull isdn commands
- monitor - Monitor administration functions
- no - Disable ping / flood ping sessions
- package-options - Package options management
- ping - Send ICMP echo request
- post-mortem - Enable/disable post mortem
- pstn - helpfull pstn commands
- restore - Restore factory default settings
- save - Save configuration [to filename]
- serial-capture - Capture traffic on serial interface
- snmp - snmp
- software - Change operational or backup software version
- telnet - Telnet to host
- term - Reserved
- test-call - make an automatic call
- trace - Filter trace calls
- trace-oam - Manage display of OAM traffic
- traceroute - Traces route to host
- untar - untar a file on flash
- verify - Verify boot or soft files
- write - Write running config
- x25 - x25 management commands
- xping - Set ping session
- one100>
Advertisement
Add Comment
Please, Sign In to add comment
