● mjpg_streamer.service - mjpg_streamer for picam
     Loaded: loaded (/lib/systemd/system/mjpg_streamer.service; enabled; vendor preset: enabled)
     Active: active (exited) since Fri 2022-02-25 08:27:28 GMT; 31min ago
    Process: 578 ExecStart=/usr/local/Repetier-Setup/bin/startAllCams (code=exited, status=0/SUCCESS)
   Main PID: 578 (code=exited, status=0/SUCCESS)
      Tasks: 6 (limit: 4915)
        CPU: 17.097s
     CGroup: /system.slice/mjpg_streamer.service
             ├─679 /usr/local/bin/mjpg_streamer -i /usr/local/lib/mjpg-streamer/input_uvc.so -d /dev/video0 --fps 30 -q 85 -r 1280x720  -o /usr/local/lib/mjpg-streamer/output_http.so -p 8084 -w /usr/local/share/mjpg-streamer/www -b
             └─703 /usr/local/bin/mjpg_streamer -i /usr/local/lib/mjpg-streamer/input_uvc.so -d /dev/video2 --fps 30 -q 85 -r 1280x720  -o /usr/local/lib/mjpg-streamer/output_http.so -p 8085 -w /usr/local/share/mjpg-streamer/www -b

Feb 25 08:27:29 3dprinters mjpg_streamer[703]: MJPG-streamer [703]: TV-Norm...........: DEFAULT
Feb 25 08:27:29 3dprinters mjpg_streamer[703]: MJPG-streamer [703]: www-folder-path......: /usr/local/share/mjpg-streamer/www/
Feb 25 08:27:29 3dprinters mjpg_streamer[703]: MJPG-streamer [703]: HTTP TCP port........: 8085
Feb 25 08:27:29 3dprinters mjpg_streamer[703]: MJPG-streamer [703]: HTTP Listen Address..: (null)
Feb 25 08:27:29 3dprinters mjpg_streamer[703]: MJPG-streamer [703]: username:password....: disabled
Feb 25 08:27:29 3dprinters mjpg_streamer[703]: MJPG-streamer [703]: commands.............: enabled
Feb 25 08:27:29 3dprinters mjpg_streamer[703]: MJPG-streamer [703]: starting input plugin /usr/local/lib/mjpg-streamer/input_uvc.so
Feb 25 08:27:29 3dprinters mjpg_streamer[703]: MJPG-streamer [703]: starting output plugin: /usr/local/lib/mjpg-streamer/output_http.so (ID: 00)
Feb 25 08:27:29 3dprinters startAllCams[705]: Webcam does not support MJPG - using slower YUYV instead!
Feb 25 08:27:29 3dprinters startAllCams[705]: Best resolution: 0 x 0 at 0