adeen-s

init.log on wt88047 pre-alpha

May 26th, 2016
31
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. ~ # cat init.log
  2. + exec
  3. + echo Running Mer Boat Loader
  4. Running Mer Boat Loader
  5. + BOOTLOGO=
  6. + ALWAYSDEBUG=
  7. + DATA_PARTITION=mmcblk0p30
  8. + DEFAULT_OS=sailfishos
  9. + export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin
  10. + USB_FUNCTIONS=rndis
  11. + ANDROID_USB=/sys/class/android_usb/android0
  12. + LOCAL_IP=192.168.2.15
  13. + DONE_SWITCH=no
  14. + [ /init = /init-debug ]
  15. + [ no = no ]
  16. + EXPLICIT_BUSYBOX=
  17. + TELNET_DEBUG_PORT=23
  18. + /bin/busybox --install -s
  19. + date
  20. __bionic_open_tzdata_path: ANDROID_ROOT not set!
  21. __bionic_open_tzdata_path: ANDROID_ROOT not set!
  22. __bionic_open_tzdata_path: ANDROID_ROOT not set!
  23. Thu May 26 07:11:38 GMT 2016
  24. + do_mount_devprocsys
  25. + echo ########################## mounting devprocsys
  26. ########################## mounting devprocsys
  27. + mkdir /dev
  28. mkdir: can't create directory '/dev': File exists
  29. + mount -t devtmpfs devtmpfs /dev
  30. + mkdir /dev/pts
  31. + mount -t devpts devpts /dev/pts
  32. + mkdir /proc
  33. + mkdir /sys
  34. + mount -t sysfs sysfs /sys
  35. + mount -t proc proc /proc
  36. + do_hotplug_scan
  37. + echo /sbin/mdev
  38. + mdev -s
  39. + sleep 2
  40. + ln -s . /dev/block
  41. + ln -s /proc/mounts /etc/mtab
  42. + check_kernel_config
  43. + echo Checking kernel config
  44. Checking kernel config
  45. + [ ! -e /proc/config.gz ]
  46. + echo No /proc/config.gz. Enable CONFIG_IKCONFIG and CONFIG_IKCONFIG_PROC
  47. + bootsplash
  48. + [ x = x1 ]
  49. + mount_stowaways
  50. + echo ########################## mounting stowaways
  51. ########################## mounting stowaways
  52. + [ ! -z mmcblk0p30 ]
  53. + get_opt data_subdir
  54. + cat /proc/cmdline
  55. + echo console=ttyHSL0,115200,n8
  56. + grep ^data_subdir=*
  57. + cut -d= -f2
  58. + echo androidboot.console=ttyHSL0
  59. + grep ^data_subdir=*
  60. + cut -d= -f2
  61. + echo androidboot.hardware=qcom
  62. + grep ^data_subdir=*
  63. + cut -d= -f2
  64. + echo msm_rtb.filter=0x237
  65. + grep ^data_subdir=*
  66. + cut -d= -f2
  67. + echo ehci-hcd.park=3
  68. + grep ^data_subdir=*
  69. + cut -d= -f2
  70. + echo androidboot.bootdevice=7824900.sdhci
  71. + grep ^data_subdir=*
  72. + cut -d= -f2
  73. + echo lpm_levels.sleep_disabled=1
  74. + grep ^data_subdir=*
  75. + cut -d= -f2
  76. + echo selinux=0
  77. + grep ^data_subdir=*
  78. + cut -d= -f2
  79. + echo phy-msm-usb.floated_charger_enable=1
  80. + grep ^data_subdir=*
  81. + cut -d= -f2
  82. + echo androidboot.emmc=true
  83. + grep ^data_subdir=*
  84. + cut -d= -f2
  85. + echo androidboot.serialno=551ee04a
  86. + grep ^data_subdir=*
  87. + cut -d= -f2
  88. + echo androidboot.baseband=msm
  89. + grep ^data_subdir=*
  90. + cut -d= -f2
  91. + echo mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_r69431_720p_video
  92. + grep ^data_subdir=*
  93. + cut -d= -f2
  94. + echo board_id=S88047C1:board_vol=1038506
  95. + grep ^data_subdir=*
  96. + cut -d= -f2
  97. + data_subdir=
  98. + mkdir /data
  99. + mkdir /target
  100. + mount mmcblk0p30 /data
  101. mount: mounting mmcblk0p30 on /data failed: No such file or directory
  102. + mount --bind /data//.stowaways/sailfishos /target
  103. mount: mounting /data//.stowaways/sailfishos on /target failed: No such file or directory
  104. + mkdir /target/data
  105. + mount --bind /data/ /target/data
  106. mount: mounting /data/ on /target/data failed: Invalid argument
  107. + mount
  108. rootfs on / type rootfs (rw)
  109. devtmpfs on /dev type devtmpfs (rw,relatime,size=372008k,nr_inodes=93002,mode=755)
  110. devpts on /dev/pts type devpts (rw,relatime,mode=600)
  111. sysfs on /sys type sysfs (rw,relatime)
  112. proc on /proc type proc (rw,relatime)
  113. + DBG_REASON=
  114. + [ -e /diagnosis.log ]
  115. + DBG_REASON=Refusing to boot. See /diagnosis.log (in initrd only)
  116. + get_opt bootmode
  117. + cat /proc/cmdline
  118. + echo console=ttyHSL0,115200,n8
  119. + grep ^bootmode=*
  120. + cut -d= -f2
  121. + echo androidboot.console=ttyHSL0
  122. + grep ^bootmode=*
  123. + cut -d= -f2
  124. + echo androidboot.hardware=qcom
  125. + grep ^bootmode=*
  126. + cut -d= -f2
  127. + echo msm_rtb.filter=0x237
  128. + grep ^bootmode=*
  129. + cut -d= -f2
  130. + echo ehci-hcd.park=3
  131. + grep ^bootmode=*
  132. + cut -d= -f2
  133. + echo androidboot.bootdevice=7824900.sdhci
  134. + grep ^bootmode=*
  135. + cut -d= -f2
  136. + echo lpm_levels.sleep_disabled=1
  137. + grep ^bootmode=*
  138. + cut -d= -f2
  139. + echo selinux=0
  140. + grep ^bootmode=*
  141. + cut -d= -f2
  142. + echo phy-msm-usb.floated_charger_enable=1
  143. + grep ^bootmode=*
  144. + cut -d= -f2
  145. + echo androidboot.emmc=true
  146. + grep ^bootmode=*
  147. + cut -d= -f2
  148. + echo androidboot.serialno=551ee04a
  149. + grep ^bootmode=*
  150. + cut -d= -f2
  151. + echo androidboot.baseband=msm
  152. + grep ^bootmode=*
  153. + cut -d= -f2
  154. + echo mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_r69431_720p_video
  155. + grep ^bootmode=*
  156. + cut -d= -f2
  157. + echo board_id=S88047C1:board_vol=1038506
  158. + grep ^bootmode=*
  159. + cut -d= -f2
  160. + [ = debug ]
  161. + [ x = x1 ]
  162. + [ -f /target/init_enter_debug ]
  163. + [ Refusing to boot. See /diagnosis.log (in initrd only) = ]
  164. + lun=/sys/class/android_usb/f_mass_storage/lun/file
  165. + [ -f /sys/class/android_usb/f_mass_storage/lun/file ]
  166. + echo /dev/mmcblk0
  167. + lun=/sys/class/android_usb/f_mass_storage/lun0/file
  168. + [ -f /sys/class/android_usb/f_mass_storage/lun0/file ]
  169. + USB_FUNCTIONS=rndis,mass_storage
  170. + run_debug_session Refusing to boot. See /diagnosis.log (in initrd only)
  171. + CUSTOMPRODUCT=Refusing
  172. + echo ########################## Debug session : Refusing
  173. ########################## Debug session : Refusing
  174. + usb_setup Mer Debug setting up (DONE_SWITCH=no)
  175. + write /sys/class/android_usb/android0/enable 0
  176. + echo -n 0
  177. + write /sys/class/android_usb/android0/functions
  178. + echo -n
  179. + write /sys/class/android_usb/android0/enable 1
  180. + echo -n 1
  181. + usleep 500000
  182. + write /sys/class/android_usb/android0/enable 0
  183. + echo -n 0
  184. + write /sys/class/android_usb/android0/idVendor 18D1
  185. + echo -n 18D1
  186. + write /sys/class/android_usb/android0/idProduct D001
  187. + echo -n D001
  188. + write /sys/class/android_usb/android0/iManufacturer Mer Boat Loader
  189. + echo -n Mer Boat Loader
  190. + write /sys/class/android_usb/android0/iProduct Refusing
  191. + echo -n Refusing
  192. + write /sys/class/android_usb/android0/iSerial Mer Debug setting up (DONE_SWITCH=no)
  193. + echo -n Mer Debug setting up (DONE_SWITCH=no)
  194. + write /sys/class/android_usb/android0/functions rndis,mass_storage
  195. + echo -n rndis,mass_storage
  196. + write /sys/class/android_usb/android0/enable 1
  197. + echo -n 1
  198. + USB_IFACE=notfound
  199. + /sbin/ifconfig rndis0 192.168.2.15
  200. + USB_IFACE=rndis0
  201. + [ xrndis0 = xnotfound ]
  202. + /sbin/ifconfig -a
  203. lo Link encap:Local Loopback
  204. LOOPBACK MTU:65536 Metric:1
  205. RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  206. TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
  207. collisions:0 txqueuelen:0
  208. RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
  209.  
  210. rndis0 Link encap:Ethernet HWaddr 3E:32:10:4F:72:7F
  211. inet addr:192.168.2.15 Bcast:192.168.2.255 Mask:255.255.255.0
  212. UP BROADCAST MULTICAST MTU:1500 Metric:1
  213. RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  214. TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
  215. collisions:0 txqueuelen:1000
  216. RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
  217.  
  218. sit0 Link encap:IPv6-in-IPv4
  219. NOARP MTU:1480 Metric:1
  220. RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  221. TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
  222. collisions:0 txqueuelen:0
  223. RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
  224.  
  225. + [ xrndis0 = xnotfound ]
  226. + echo start 192.168.2.20
  227. + echo end 192.168.2.90
  228. + echo lease_file /var/udhcpd.leases
  229. + echo interface rndis0
  230. + echo option subnet 255.255.255.0
  231. + echo ########################## starting dhcpd
  232. ########################## starting dhcpd
  233. + udhcpd
  234. + HALT_BOOT=to
  235. + set_welcome_msg to
  236. + cat
  237. + [ no = no ]
  238. + cat
  239. + cat
  240. + HALT_BOOT=to
  241. + [ to = y ]
  242. + [ no = no ]
  243. + cat
  244. + echo ########################## starting telnetd
  245. ########################## starting telnetd
  246. + telnetd -b 192.168.2.15:23 -l /bin/sh
  247. + usb_info Mer Debug telnet on port 23 on rndis0 192.168.2.15 - also running udhcpd
  248. + echo ########################## usb_info: Mer Debug telnet on port 23 on rndis0 192.168.2.15 - also running udhcpd
  249. ########################## usb_info: Mer Debug telnet on port 23 on rndis0 192.168.2.15 - also running udhcpd
  250. + sleep 1
  251. + write /sys/class/android_usb/android0/iSerial Mer Debug telnet on port 23 on rndis0 192.168.2.15 - also running udhcpd
  252. + echo -n Mer Debug telnet on port 23 on rndis0 192.168.2.15 - also running udhcpd
  253. + [ to = y ]
  254. + killall telnetd
  255. + killall udhcpd
  256. + USB_FUNCTIONS=rndis
  257. + usb_setup Mer Debug: done debug, disabling storage
  258. + write /sys/class/android_usb/android0/enable 0
  259. + echo -n 0
  260. + write /sys/class/android_usb/android0/functions
  261. + echo -n
  262. + write /sys/class/android_usb/android0/enable 1
  263. + echo -n 1
  264. + usleep 500000
  265. + write /sys/class/android_usb/android0/enable 0
  266. + echo -n 0
  267. + write /sys/class/android_usb/android0/idVendor 18D1
  268. + echo -n 18D1
  269. + write /sys/class/android_usb/android0/idProduct D001
  270. + echo -n D001
  271. + write /sys/class/android_usb/android0/iManufacturer Mer Boat Loader
  272. + echo -n Mer Boat Loader
  273. + write /sys/class/android_usb/android0/iProduct Refusing
  274. + echo -n Refusing
  275. + write /sys/class/android_usb/android0/iSerial Mer Debug: done debug, disabling storage
  276. + echo -n Mer Debug: done debug, disabling storage
  277. + write /sys/class/android_usb/android0/functions rndis
  278. + echo -n rndis
  279. + write /sys/class/android_usb/android0/enable 1
  280. + echo -n 1
  281. + echo
  282. + [ -f /target/init-debug ]
  283. + [ -x /target/sbin/preinit ]
  284. + INIT=/sbin/init
  285. + [ -x /target/sbin/init ]
  286. + run_debug_session Failed to boot init in real rootfs
  287. + CUSTOMPRODUCT=Failed to boot init in real rootfs
  288. + echo ########################## Debug session : Failed to boot init in real rootfs
  289. ########################## Debug session : Failed to boot init in real rootfs
  290. + usb_setup Mer Debug setting up (DONE_SWITCH=no)
  291. + write /sys/class/android_usb/android0/enable 0
  292. + echo -n 0
  293. + write /sys/class/android_usb/android0/functions
  294. + echo -n
  295. + write /sys/class/android_usb/android0/enable 1
  296. + echo -n 1
  297. + usleep 500000
  298. + write /sys/class/android_usb/android0/enable 0
  299. + echo -n 0
  300. + write /sys/class/android_usb/android0/idVendor 18D1
  301. + echo -n 18D1
  302. + write /sys/class/android_usb/android0/idProduct D001
  303. + echo -n D001
  304. + write /sys/class/android_usb/android0/iManufacturer Mer Boat Loader
  305. + echo -n Mer Boat Loader
  306. + write /sys/class/android_usb/android0/iProduct Failed to boot init in real rootfs
  307. + echo -n Failed to boot init in real rootfs
  308. + write /sys/class/android_usb/android0/iSerial Mer Debug setting up (DONE_SWITCH=no)
  309. + echo -n Mer Debug setting up (DONE_SWITCH=no)
  310. + write /sys/class/android_usb/android0/functions rndis
  311. + echo -n rndis
  312. + write /sys/class/android_usb/android0/enable 1
  313. + echo -n 1
  314. + USB_IFACE=notfound
  315. + /sbin/ifconfig rndis0 192.168.2.15
  316. + USB_IFACE=rndis0
  317. + [ xrndis0 = xnotfound ]
  318. + /sbin/ifconfig -a
  319. lo Link encap:Local Loopback
  320. LOOPBACK MTU:65536 Metric:1
  321. RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  322. TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
  323. collisions:0 txqueuelen:0
  324. RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
  325.  
  326. rndis0 Link encap:Ethernet HWaddr 3E:8D:84:F9:08:87
  327. inet addr:192.168.2.15 Bcast:192.168.2.255 Mask:255.255.255.0
  328. UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
  329. RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  330. TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
  331. collisions:0 txqueuelen:1000
  332. RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
  333.  
  334. sit0 Link encap:IPv6-in-IPv4
  335. NOARP MTU:1480 Metric:1
  336. RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  337. TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
  338. collisions:0 txqueuelen:0
  339. RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
  340.  
  341. + [ xrndis0 = xnotfound ]
  342. + echo start 192.168.2.20
  343. + echo end 192.168.2.90
  344. + echo lease_file /var/udhcpd.leases
  345. + echo interface rndis0
  346. + echo option subnet 255.255.255.0
  347. + echo ########################## starting dhcpd
  348. ########################## starting dhcpd
  349. + udhcpd
  350. + HALT_BOOT=y
  351. + set_welcome_msg y
  352. + cat
  353. + [ no = no ]
  354. + cat
  355. + cat
  356. + HALT_BOOT=y
  357. + [ y = y ]
  358. + cat
  359. + [ no = no ]
  360. + cat
  361. + echo ########################## starting telnetd
  362. ########################## starting telnetd
  363. + telnetd -b 192.168.2.15:23 -l /bin/sh
  364. + usb_info Mer Debug telnet on port 23 on rndis0 192.168.2.15 - also running udhcpd
  365. + echo ########################## usb_info: Mer Debug telnet on port 23 on rndis0 192.168.2.15 - also running udhcpd
  366. ########################## usb_info: Mer Debug telnet on port 23 on rndis0 192.168.2.15 - also running udhcpd
  367. + sleep 1
  368. + write /sys/class/android_usb/android0/iSerial Mer Debug telnet on port 23 on rndis0 192.168.2.15 - also running udhcpd
  369. + echo -n Mer Debug telnet on port 23 on rndis0 192.168.2.15 - also running udhcpd
  370. + [ y = y ]
  371. + ps -wlT
  372. __bionic_open_tzdata_path: ANDROID_ROOT not set!
  373. __bionic_open_tzdata_path: ANDROID_ROOT not set!
  374. __bionic_open_tzdata_path: ANDROID_ROOT not set!
  375. S UID PID PPID VSZ RSS TTY STIME TIME CMD
  376. S 0 1 0 952 324 0:0 07:11 00:00:00 {init} /bin/sh /init
  377. S 0 2 0 0 0 0:0 07:11 00:00:00 [kthreadd]
  378. S 0 3 2 0 0 0:0 07:11 00:00:00 [ksoftirqd/0]
  379. S 0 4 2 0 0 0:0 07:11 00:00:00 [kworker/0:0]
  380. S 0 5 2 0 0 0:0 07:11 00:00:00 [kworker/0:0H]
  381. S 0 6 2 0 0 0:0 07:11 00:00:00 [kworker/u8:0]
  382. S 0 7 2 0 0 0:0 07:11 00:00:00 [rcu_preempt]
  383. S 0 8 2 0 0 0:0 07:11 00:00:00 [rcu_bh]
  384. S 0 9 2 0 0 0:0 07:11 00:00:00 [rcu_sched]
  385. S 0 10 2 0 0 0:0 07:11 00:00:00 [migration/0]
  386. S 0 11 2 0 0 0:0 07:11 00:00:00 [migration/1]
  387. S 0 12 2 0 0 0:0 07:11 00:00:00 [ksoftirqd/1]
  388. S 0 13 2 0 0 0:0 07:11 00:00:00 [kworker/1:0]
  389. S 0 14 2 0 0 0:0 07:11 00:00:00 [kworker/1:0H]
  390. S 0 15 2 0 0 0:0 07:11 00:00:00 [migration/2]
  391. S 0 16 2 0 0 0:0 07:11 00:00:00 [ksoftirqd/2]
  392. S 0 17 2 0 0 0:0 07:11 00:00:00 [kworker/2:0]
  393. S 0 18 2 0 0 0:0 07:11 00:00:00 [kworker/2:0H]
  394. S 0 19 2 0 0 0:0 07:11 00:00:00 [migration/3]
  395. S 0 20 2 0 0 0:0 07:11 00:00:00 [ksoftirqd/3]
  396. S 0 21 2 0 0 0:0 07:11 00:00:00 [kworker/3:0]
  397. S 0 22 2 0 0 0:0 07:11 00:00:00 [kworker/3:0H]
  398. S 0 23 2 0 0 0:0 07:11 00:00:00 [khelper]
  399. S 0 24 2 0 0 0:0 07:11 00:00:00 [kdevtmpfs]
  400. S 0 25 2 0 0 0:0 07:11 00:00:00 [netns]
  401. S 0 26 2 0 0 0:0 07:11 00:00:00 [kworker/1:1]
  402. S 0 27 2 0 0 0:0 07:11 00:00:00 [kworker/0:1]
  403. S 0 28 2 0 0 0:0 07:11 00:00:00 [kworker/3:1]
  404. S 0 29 2 0 0 0:0 07:11 00:00:00 [kworker/2:1]
  405. S 0 30 2 0 0 0:0 07:11 00:00:00 [kworker/0:1H]
  406. S 0 31 2 0 0 0:0 07:11 00:00:00 [smd_channel_clo]
  407. S 0 32 2 0 0 0:0 07:11 00:00:00 [smsm_cb_wq]
  408. D 0 33 2 0 0 0:0 07:11 00:00:00 [kworker/u8:1]
  409. D 0 34 2 0 0 0:0 07:11 00:00:00 [kworker/u9:0]
  410. S 0 35 2 0 0 0:0 07:11 00:00:00 [rpm-smd]
  411. S 0 36 2 0 0 0:0 07:11 00:00:00 [kworker/u9:1]
  412. S 0 37 2 0 0 0:0 07:11 00:00:00 [irq/47-cpr]
  413. S 0 38 2 0 0 0:0 07:11 00:00:00 [deferwq]
  414. S 0 39 2 0 0 0:0 07:11 00:00:00 [mpm]
  415. S 0 40 2 0 0 0:0 07:11 00:00:00 [kworker/u8:2]
  416. S 0 41 2 0 0 0:0 07:11 00:00:00 [kworker/u8:3]
  417. S 0 56 2 0 0 0:0 07:11 00:00:00 [writeback]
  418. S 0 57 2 0 0 0:0 07:11 00:00:00 [bioset]
  419. S 0 58 2 0 0 0:0 07:11 00:00:00 [crypto]
  420. S 0 59 2 0 0 0:0 07:11 00:00:00 [kblockd]
  421. S 0 60 2 0 0 0:0 07:11 00:00:00 [khubd]
  422. S 0 61 2 0 0 0:0 07:11 00:00:00 [system]
  423. S 0 62 2 0 0 0:0 07:11 00:00:00 [irq/75-msm_iomm]
  424. S 0 63 2 0 0 0:0 07:11 00:00:00 [irq/75-msm_iomm]
  425. S 0 64 2 0 0 0:0 07:11 00:00:00 [irq/273-msm_iom]
  426. S 0 65 2 0 0 0:0 07:11 00:00:00 [irq/274-msm_iom]
  427. S 0 66 2 0 0 0:0 07:11 00:00:00 [irq/102-msm_iom]
  428. S 0 67 2 0 0 0:0 07:11 00:00:00 [irq/102-msm_iom]
  429. S 0 68 2 0 0 0:0 07:11 00:00:00 [irq/102-msm_iom]
  430. S 0 69 2 0 0 0:0 07:11 00:00:00 [irq/102-msm_iom]
  431. S 0 70 2 0 0 0:0 07:11 00:00:00 [irq/102-msm_iom]
  432. S 0 71 2 0 0 0:0 07:11 00:00:00 [irq/102-msm_iom]
  433. S 0 72 2 0 0 0:0 07:11 00:00:00 [irq/102-msm_iom]
  434. S 0 73 2 0 0 0:0 07:11 00:00:00 [irq/102-msm_iom]
  435. S 0 74 2 0 0 0:0 07:11 00:00:00 [irq/102-msm_iom]
  436. S 0 75 2 0 0 0:0 07:11 00:00:00 [irq/102-msm_iom]
  437. S 0 76 2 0 0 0:0 07:11 00:00:00 [irq/102-msm_iom]
  438. S 0 77 2 0 0 0:0 07:11 00:00:00 [irq/102-msm_iom]
  439. S 0 78 2 0 0 0:0 07:11 00:00:00 [irq/102-msm_iom]
  440. S 0 79 2 0 0 0:0 07:11 00:00:00 [irq/102-msm_iom]
  441. S 0 80 2 0 0 0:0 07:11 00:00:00 [irq/102-msm_iom]
  442. S 0 81 2 0 0 0:0 07:11 00:00:00 [irq/102-msm_iom]
  443. S 0 82 2 0 0 0:0 07:11 00:00:00 [irq/102-msm_iom]
  444. S 0 83 2 0 0 0:0 07:11 00:00:00 [irq/102-msm_iom]
  445. S 0 84 2 0 0 0:0 07:11 00:00:00 [irq/102-msm_iom]
  446. S 0 85 2 0 0 0:0 07:11 00:00:00 [irq/102-msm_iom]
  447. S 0 86 2 0 0 0:0 07:11 00:00:00 [devfreq_wq]
  448. S 0 87 2 0 0 0:0 07:11 00:00:00 [cfg80211]
  449. S 0 88 2 0 0 0:0 07:11 00:00:00 [rpciod]
  450. S 0 89 2 0 0 0:0 07:11 00:00:00 [kswapd0]
  451. S 0 90 2 0 0 0:0 07:11 00:00:00 [fsnotify_mark]
  452. S 0 91 2 0 0 0:0 07:11 00:00:00 [nfsiod]
  453. S 0 92 2 0 0 0:0 07:11 00:00:00 [cifsiod]
  454. D 0 112 2 0 0 0:0 07:11 00:00:00 [mdss_dsi_event]
  455. S 0 113 2 0 0 0:0 07:11 00:00:00 [apr_driver]
  456. S 0 114 2 0 0 0:0 07:11 00:00:00 [pil_vote_wq]
  457. S 0 115 2 0 0 0:0 07:11 00:00:00 [mem_share_svc]
  458. S 0 116 2 0 0 0:0 07:11 00:00:00 [qmi_hndl0000000]
  459. S 0 117 2 0 0 0:0 07:11 00:00:00 [msm_ipc_router]
  460. S 0 118 2 0 0 0:0 07:11 00:00:00 [hwrng]
  461. S 0 119 2 0 0 0:0 07:11 00:00:00 [diag_real_time_]
  462. S 0 120 2 0 0 0:0 07:11 00:00:00 [diag_modem_data]
  463. S 0 121 2 0 0 0:0 07:11 00:00:00 [diag_lpass_data]
  464. S 0 122 2 0 0 0:0 07:11 00:00:00 [diag_wcnss_data]
  465. S 0 123 2 0 0 0:0 07:11 00:00:00 [diag_sensors_da]
  466. S 0 124 2 0 0 0:0 07:11 00:00:00 [diag_wq]
  467. S 0 125 2 0 0 0:0 07:11 00:00:00 [DIAG_USB_diag]
  468. S 0 126 2 0 0 0:0 07:11 00:00:00 [diag_cntl_wq]
  469. S 0 127 2 0 0 0:0 07:11 00:00:00 [diag_dci_wq]
  470. S 0 128 2 0 0 0:0 07:11 00:00:00 [kgsl-3d0]
  471. S 0 129 2 0 0 0:0 07:11 00:00:00 [kgsl-events]
  472. S 0 130 2 0 0 0:0 07:11 00:00:00 [governor_msm_ad]
  473. S 0 131 2 0 0 0:0 07:11 00:00:00 [kgsl_devfreq_wq]
  474. S 0 132 2 0 0 0:0 07:11 00:00:00 [spi0]
  475. S 0 135 2 0 0 0:0 07:11 00:00:00 [usbnet]
  476. S 0 136 2 0 0 0:0 07:11 00:00:00 [sharedmem_qmi_w]
  477. S 0 137 2 0 0 0:0 07:11 00:00:00 [qmi_hndl0000000]
  478. S 0 138 2 0 0 0:0 07:11 00:00:00 [kworker/0:2]
  479. S 0 139 2 0 0 0:0 07:11 00:00:00 [k_gserial]
  480. S 0 140 2 0 0 0:0 07:11 00:00:00 [uether]
  481. S 0 141 2 0 0 0:0 07:11 00:00:00 [irq/327-ft5x06_]
  482. S 0 142 2 0 0 0:0 07:11 00:00:00 [mpu6050_data_wo]
  483. S 0 143 2 0 0 0:0 07:11 00:00:00 [sns_gyro]
  484. S 0 144 2 0 0 0:0 07:11 00:00:00 [sns_accel]
  485. S 0 147 2 0 0 0:0 07:11 00:00:00 [msm_cpp_workque]
  486. S 0 148 2 0 0 0:0 07:11 00:00:00 [irq/328-smb1360]
  487. S 0 149 2 0 0 0:0 07:11 00:00:00 [dm_bufio_cache]
  488. S 0 150 2 0 0 0:0 07:11 00:00:00 [cfinteractive]
  489. S 0 151 2 0 0 0:0 07:11 00:00:00 [irq/170-7824900]
  490. S 0 152 2 0 0 0:0 07:11 00:00:00 [kworker/0:3]
  491. S 0 153 2 0 0 0:0 07:11 00:00:00 [irq/253-7864900]
  492. S 0 174 2 0 0 0:0 07:11 00:00:00 [binder]
  493. S 0 175 2 0 0 0:0 07:11 00:00:00 [usb_bam_wq]
  494. S 0 176 2 0 0 0:0 07:11 00:00:00 [mmcqd/0]
  495. S 0 177 2 0 0 0:0 07:11 00:00:00 [mmcqd/0rpmb]
  496. S 0 178 2 0 0 0:0 07:11 00:00:00 [krfcommd]
  497. S 0 179 2 0 0 0:0 07:11 00:00:00 [irq/460-wcnss]
  498. S 0 180 2 0 0 0:0 07:11 00:00:00 [irq/428-modem]
  499. S 0 181 2 0 0 0:0 07:11 00:00:00 [kworker/u8:4]
  500. S 0 182 2 0 0 0:0 07:11 00:00:00 [msm_vidc_worker]
  501. S 0 183 2 0 0 0:0 07:11 00:00:00 [pm_workerq_venu]
  502. S 0 184 2 0 0 0:0 07:11 00:00:00 [rq_stats]
  503. S 0 185 2 0 0 0:0 07:11 00:00:00 [bam_dmux_rx]
  504. S 0 186 2 0 0 0:0 07:11 00:00:00 [bam_dmux_tx]
  505. S 0 187 2 0 0 0:0 07:11 00:00:00 [k_bam_data]
  506. S 0 188 2 0 0 0:0 07:11 00:00:00 [f_mtp]
  507. S 0 189 2 0 0 0:0 07:11 00:00:00 [file-storage]
  508. S 0 190 2 0 0 0:0 07:11 00:00:00 [msm_thermal:hot]
  509. S 0 191 2 0 0 0:0 07:11 00:00:00 [msm_thermal:fre]
  510. S 0 192 2 0 0 0:0 07:11 00:00:00 [msm_thermal:the]
  511. S 0 193 2 0 0 0:0 07:11 00:00:00 [boost_sync/0]
  512. S 0 194 2 0 0 0:0 07:11 00:00:00 [boost_sync/1]
  513. S 0 195 2 0 0 0:0 07:11 00:00:00 [boost_sync/2]
  514. S 0 196 2 0 0 0:0 07:11 00:00:00 [boost_sync/3]
  515. S 0 211 2 0 0 0:0 07:11 00:00:00 [mmcqd/1]
  516. S 0 374 1 928 40 0:0 07:11 00:00:00 udhcpd
  517. S 0 386 1 924 40 0:0 07:11 00:00:00 telnetd -b 192.168.2.15:23 -l /bin/sh
  518. R 0 388 1 988 240 0:0 07:11 00:00:00 ps -wlT
  519. + ps -ef
  520. ps: invalid option -- e
  521. BusyBox v1.22.1 static (2016-05-24 12:33 +0000) multi-call binary.
  522.  
  523. Usage: ps
  524.  
  525. Show list of processes
  526.  
  527. -Z Show selinux context
  528. w Wide output
  529. l Long output
  530. T Show threads
  531.  
  532. + netstat -lnp
  533. Active Internet connections (only servers)
  534. Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name
  535. tcp 0 0 192.168.2.15:23 0.0.0.0:* LISTEN 386/telnetd
  536. udp 0 0 0.0.0.0:67 0.0.0.0:* 374/udhcpd
  537. Active UNIX domain sockets (only servers)
  538. Proto RefCnt Flags Type State I-Node PID/Program name Path
  539. + cat /proc/mounts
  540. rootfs / rootfs rw 0 0
  541. devtmpfs /dev devtmpfs rw,relatime,size=372008k,nr_inodes=93002,mode=755 0 0
  542. devpts /dev/pts devpts rw,relatime,mode=600 0 0
  543. sysfs /sys sysfs rw,relatime 0 0
  544. proc /proc proc rw,relatime 0 0
  545. + sync
  546. + inject_loop
  547. + INJ_DIR=/init-ctl
  548. + INJ_STDIN=/init-ctl/stdin
  549. + mkdir /init-ctl
  550. + mkfifo /init-ctl/stdin
  551. + echo This entire directory is for debugging init - it can safely be removed
  552. + echo ########################## Beginning inject loop
  553. ########################## Beginning inject loop
  554. + :
RAW Paste Data