PIXA

Switch>
Switch>en
Switch#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Switch(config)#hostname
% Incomplete command.
Switch(config)#hostname sw
sw(config)#username admin pa
sw(config)#username admin password  cisco
sw(config)#service
sw(config)#service pa
sw(config)#service password-encryption
sw(config)#en
sw(config)#ena
sw(config)#enable sec
sw(config)#enable secret
% Incomplete command.
sw(config)#enable secret cisco
sw(config)#line console 0
sw(config-line)#login local
sw(config-line)#lillolline vty 0 15
                 ^
% Invalid input detected at '^' marker.

sw(config-line)#line vty 0 15
sw(config-line)#login local
sw(config-line)#ex
% Ambiguous command: "ex"
sw(config-line)#
sw#
%SYS-5-CONFIG_I: Configured from console by console

sw#
sw#exit


sw con0 is now available


Press RETURN to get started.


User Access Verification

Username: admin
Password:

sw>en
Password:
sw#banner
sw#babconf t
Enter configuration commands, one per line.  End with CNTL/Z.
sw(config)#banne
sw(config)#banner motd " ACesso Negado"
sw(config)#ex
sw#
%SYS-5-CONFIG_I: Configured from console by console

sw#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
sw(config)#
sw(config)#ex
sw#
%SYS-5-CONFIG_I: Configured from console by console
ex


sw con0 is now available


Press RETURN to get started.


 ACesso Negado

User Access Verification

Username: admin
Password:
% Login invalid

Username:
Username:


Press RETURN to get started!

 ACesso Negado

User Access Verification

Username:
Username:
Username:


Press RETURN to get started!

 ACesso Negado

User Access Verification

Username: admin
Password:

sw>conf t
        ^
% Invalid input detected at '^' marker.

sw>en
Password:
Password:
sw#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
sw(config)#int vlan 1
sw(config-if)#ip add 192.168.10.254 255.255.255.0
sw(config-if)#no shut

sw(config-if)#
%LINK-5-CHANGED: Interface Vlan1, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface Vlan1, changed state to up

sw(config-if)#
sw(config-if)#ex
sw(config)#
%SYS-5-CONFIG_I: Configured from console by console

///////////////////////////////////////////////////////////////////////
PC TELNET
Packet Tracer PC Command Line 1.0
C:\>~telnet 192.168.10.254
Invalid Command.

C:\>telnet 192.168.10.254
Trying 192.168.10.254 ...Open ACesso Negado


User Access Verification

Username: admin

Password:
sw>en
Password:
sw#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
sw(config)#ip domain
sw(config)#ip domain?
domain  domain-lookup  domain-name
sw(config)#ip domain
% Incomplete command.
sw(config)#ip domain-name atec.cisco
sw(config)#crypt
sw(config)#crypto k
sw(config)#crypto key  g
sw(config)#crypto key  generate r
sw(config)#crypto key  generate rsa
The name for the keys will be: sw.atec.cisco
Choose the size of the key modulus in the range of 360 to 2048 for your
  General Purpose Keys. Choosing a key modulus greater than 512 may take
  a few minutes.

How many bits in the modulus [512]: 1024
% Generating 1024 bit RSA keys, keys will be non-exportable...[OK]

sw(config)#line vty 0 15
*mar 1 0:11:15.477:  %SSH-5-ENABLED: SSH 1.99 has been enabled
sw(config-line)#transport
sw(config-line)#transport ss
sw(config-line)#transport ssh
sw(config-line)#transport i
sw(config-line)#transport input ss
sw(config-line)#transport input ssh
sw(config-line)#cop r s
                ^
% Invalid input detected at '^' marker.

sw(config-line)#
sw(config-line)#exit
sw(config)#cop r s
            ^
% Invalid input detected at '^' marker.

sw(config)#copy
sw(config)#copy r
sw(config)#copy run
sw(config)#copy run
sw(config)#exit
sw#cop r s
Destination filename [startup-config]?
Building configuration...
[OK]
sw#
sw#
sw#exot
Translating "exot"...domain server (255.255.255.255) % Name lookup aborted
sw#
sw#ex

[Connection to 192.168.10.254 closed by foreign host]
C:\>telnet 192.168.10.254
Trying 192.168.10.254 ...Open

[Connection to 192.168.10.254 closed by foreign host]
C:\>