[    2.823468] acpi PNP0C14:03: duplicate WMI GUID 05901221-D566-11D1-B2F0-00A0C9062910 (first instance was on PNP0C14:00)
[    2.912341] mmc0: new HS200 MMC card at address 0001
[    3.020814] i2c_hid i2c-HDP0001:00: i2c-HDP0001:00 supply vdd not found, using dummy regulator
[    3.229800] usbcore: registered new interface driver usbhid
[    3.229803] usbhid: USB HID core driver
[    3.393892] input: Wacom HID 169 Pen as /devices/pci0000:00/808622C1:03/i2c-3/i2c-WCOM0019:00/0018:056A:0169.0001/input/input3
[    3.394666] wacom 0018:056A:0169.0001: hidraw0: I2C HID v1.00 Mouse [WCOM0019:00 056A:0169] on i2c-WCOM0019:00
[    3.922415] mmc1: SDHCI controller on ACPI [80860F14:01] using ADMA
[    3.928268] mmcblk0: mmc0:0001 CWBD3R 58.2 GiB
[    3.928790] mmcblk0boot0: mmc0:0001 CWBD3R partition 1 4.00 MiB
[    3.929789] mmcblk0boot1: mmc0:0001 CWBD3R partition 2 4.00 MiB
[    3.930112] mmcblk0rpmb: mmc0:0001 CWBD3R partition 3 4.00 MiB, chardev (241:0)
[    3.953623]  mmcblk0: p1 p2 p3 p4 p5
[    5.343082] [drm] Memory usable by graphics device = 2048M
[    5.343086] [drm] Replacing VGA console driver
[    5.343242] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    5.343244] [drm] Driver supports precise vblank timestamp query.
[    5.354968] ish-hid {33AECD58-B679-4E54-9BD9-A04D34F0C226}: [hid-ish]: enum_devices_done OK, num_hid_devices=6
[    5.370178] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    5.373434] [drm:pwm_setup_backlight [i915]] *ERROR* Failed to own the pwm chip
[    5.380425] [drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
[    5.382247] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    5.385895] acpi device:22: registered as cooling_device4
[    5.386794] acpi device:23: registered as cooling_device5
[    5.387677] acpi device:24: registered as cooling_device6
[    5.388664] acpi device:25: registered as cooling_device7
[    5.389554] acpi device:26: registered as cooling_device8
[    5.390482] acpi device:27: registered as cooling_device9
[    5.391372] acpi device:28: registered as cooling_device10
[    5.392937] acpi device:29: registered as cooling_device11
[    5.393063] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    5.393475] [drm] HDaudio controller not detected, using LPE audio instead
[    5.418408] fbcon: inteldrmfb (fb0) is primary device
[    5.659384] mmc1: new ultra high speed SDR104 SDXC card at address aaaa
[    5.660046] mmcblk1: mmc1:aaaa SC128 119 GiB
[    5.668366]  mmcblk1: p1
[    6.432093] Console: switching to colour frame buffer device 150x120
[    6.477421] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[   11.623780] EXT4-fs (mmcblk0p5): mounted filesystem with ordered data mode. Opts: (null)
[   11.915584] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   11.932724] systemd[1]: Detected architecture x86-64.
[   11.933786] systemd[1]: Set hostname to <jimlubuntu>.
[   12.091565] systemd[1]: Listening on Journal Audit Socket.
[   12.091726] systemd[1]: Listening on fsck to fsckd communication Socket.
[   12.091820] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   12.091843] systemd[1]: Reached target Swap.
[   12.092209] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[   12.092246] systemd[1]: Reached target User and Group Name Lookups.
[   12.092269] systemd[1]: Reached target Encrypted Volumes.
[   12.338928] EXT4-fs (mmcblk0p5): re-mounted. Opts: errors=remount-ro
[   12.361337] systemd-journald[266]: Received request to flush runtime journal from PID 1
[   12.608366] 8086228A:00: ttyS4 at MMIO 0x91d22000 (irq = 39, base_baud = 2764800) is a 16550A
[   12.608530] serial serial0: tty port ttyS4 registered
[   12.616345] 8086228A:01: ttyS5 at MMIO 0x91d20000 (irq = 40, base_baud = 2764800) is a 16550A
[   12.616509] serial serial1: tty port ttyS5 registered
[   12.632825] Goodix-TS i2c-GDIX1001:00: ID 9110, version: 2003
[   12.640467] input: Goodix Capacitive TouchScreen as /devices/pci0000:00/808622C1:01/i2c-1/i2c-GDIX1001:00/input/input7
[   12.661868] input: Intel HID events as /devices/pci0000:00/INT33D5:00/input/input8
[   12.700404] dw_dmac INTL9C60:00: DesignWare DMA Controller, 8 channels
[   12.740573] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
[   12.744412] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   12.747991] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   12.748218] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[   12.812190] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=0 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input9
[   12.812351] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=1 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input10
[   12.812456] input: Intel HDMI/DP LPE Audio HDMI/DP,pcm=2 as /devices/pci0000:00/0000:00:02.0/hdmi-lpe-audio/sound/card0/input11
[   12.926558] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[   12.927398] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[   12.965660] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[   12.965668] cfg80211: failed to load regulatory.db
[   13.011910] intel_sst_acpi 808622A8:00: No matching machine driver found
[   13.033239] usbcore: registered new interface driver brcmfmac
[   13.140534] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac4356-pcie.bin for chip 0x004356(17238) rev 0x000002
[   13.157340] SSE version of gcm_enc/dec engaged.
[   13.185230] input: HDP0001:00 2ABB:8102 as /devices/pci0000:00/808622C1:05/i2c-5/i2c-HDP0001:00/0018:2ABB:8102.0002/input/input12
[   13.207934] hid-multitouch 0018:2ABB:8102.0002: input,hidraw1: I2C HID v1.00 Device [HDP0001:00 2ABB:8102] on i2c-HDP0001:00
[   13.373829] input: gpio-keys as /devices/platform/gpio-keys.32.auto/input/input14
[   13.379263] input: gpio-keys as /devices/platform/gpio-keys.33.auto/input/input15
[   13.453902] brcmfmac 0000:01:00.0: Direct firmware load for brcm/brcmfmac4356-pcie.clm_blob failed with error -2
[   13.453909] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available(err=-2), device may have limited channels available
[   13.455064] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 22 2015 06:16:41 version 7.35.180.119 (r594535) FWID 01-1a5c4016
[   13.552852] intel_rapl: Found RAPL domain package
[   13.552856] intel_rapl: Found RAPL domain core
[   13.599657] bq24190-charger i2c-bq24190: Error unknown model: 0x06
[   13.599736] bq24190-charger i2c-bq24190: Hardware init failed
[   13.603079] audit: type=1400 audit(1524440745.547:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=613 comm="apparmor_parser"
[   13.603092] audit: type=1400 audit(1524440745.547:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=613 comm="apparmor_parser"
[   13.603097] audit: type=1400 audit(1524440745.547:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=613 comm="apparmor_parser"
[   13.603102] audit: type=1400 audit(1524440745.547:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=613 comm="apparmor_parser"
[   13.611363] audit: type=1400 audit(1524440745.559:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/ntpd" pid=616 comm="apparmor_parser"
[   13.612996] brcmfmac 0000:01:00.0 wlp1s0: renamed from wlan0
[   13.617068] audit: type=1400 audit(1524440745.563:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=612 comm="apparmor_parser"
[   13.617078] audit: type=1400 audit(1524440745.563:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=612 comm="apparmor_parser"
[   13.621813] audit: type=1400 audit(1524440745.567:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=618 comm="apparmor_parser"
[   13.641597] audit: type=1400 audit(1524440745.587:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=614 comm="apparmor_parser"
[   13.641607] audit: type=1400 audit(1524440745.587:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/evince//sanitized_helper" pid=614 comm="apparmor_parser"
[   13.828922] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [UserDefinedRegion] (20170831/evregion-300)
[   13.829074] No Local Variables are initialized for Method [PAT0]
[   13.829077] Initialized Arguments for Method [PAT0]:  (1 arguments defined for method invocation)
[   13.829079]   Arg0:   0000000079b458df <Obj>           Integer 0000000000000C3C
[   13.829093] ACPI Error: Method parse/execution failed \_SB.STR2.PAT0, AE_BAD_PARAMETER (20170831/psparse-550)
[   13.853925] ACPI Exception: AE_BAD_PARAMETER, Returned by Handler for [UserDefinedRegion] (20170831/evregion-300)
[   13.854067] No Local Variables are initialized for Method [PAT0]
[   13.854070] Initialized Arguments for Method [PAT0]:  (1 arguments defined for method invocation)
[   13.854072]   Arg0:   0000000079b458df <Obj>           Integer 0000000000000C46
[   13.854087] ACPI Error: Method parse/execution failed \_SB.STR0.PAT0, AE_BAD_PARAMETER (20170831/psparse-550)
[   14.078514] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   14.133827] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   14.312416] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[   23.227650] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready