armoon

odroid n2 sdcard clk_ignore_unused

Oct 9th, 2019
275
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. ?????G12B:BL:6e7c85:7898ac;FEAT:E0F83180:2000;POC:F;RCY:0;EMMC:800;NAND:81;SD?:0;SD:0;READ:0;0.
  2. bl2_stage_init 0x01
  3. bl2_stage_init 0x81
  4. hw id: 0x0000 - pwm id 0x01
  5. bl2_stage_init 0xc1
  6. bl2_stage_init 0x02
  7.  
  8. no sdio debug board detected
  9. L0:00000000
  10. L1:00000703
  11. L2:00008067
  12. L3:04000000
  13. B2:00002000
  14. B1:e0f83180
  15.  
  16. TE: 200517
  17.  
  18. BL2 Built : 06:17:13, Jun 28 2019. g12b gf0505d7-dirty - qi.duan@droid13
  19.  
  20. Board ID = 4
  21. Set A53 clk to 24M
  22. Set A73 clk to 24M
  23. Set clk81 to 24M
  24. A53 clk: 1200 MHz
  25. A73 clk: 1200 MHz
  26. CLK81: 166.6M
  27. smccc: 0003577c
  28. DDR driver_vesion: LPDDR4_PHY_V_0_1_14 build time: Jun 28 2019 06:17:09
  29. board id: 4
  30. Load FIP HDR from SD, src: 0x00010200, des: 0xfffd0000, size: 0x00004000, part: 0
  31. fw parse done
  32. Load ddrfw from SD, src: 0x00060200, des: 0xfffd0000, size: 0x0000c000, part: 0
  33. Load ddrfw from SD, src: 0x00038200, des: 0xfffd0000, size: 0x00004000, part: 0
  34. PIEI prepare done
  35. fastboot data load
  36. fastboot data verify
  37. verify result: 255
  38. Cfg max: 1, cur: 1. Board id: 255. Force loop cfg
  39. DDR4 probe
  40. ddr clk to 1320MHz
  41. Load ddrfw from SD, src: 0x00014200, des: 0xfffd0000, size: 0x0000c000, part: 0
  42. Check phy result
  43. INFO : End of initialization
  44. INFO : End of read enable training
  45. INFO : End of fine write leveling
  46. INFO : End of read dq deskew training
  47. INFO : End of MPR read delay center optimization
  48. INFO : End of Write leveling coarse delay
  49. INFO : End of write delay center optimization
  50. INFO : End of read delay center optimization
  51. INFO : End of max read latency training
  52. INFO : Training has run successfully!
  53. 1D training succeed
  54. Load ddrfw from SD, src: 0x00020200, des: 0xfffd0000, size: 0x0000c000, part: 0
  55. Check phy result
  56. INFO : End of initialization
  57. INFO : End of 2D read delay Voltage center optimization
  58. INFO : End of 2D write delay Voltage center optimization
  59. INFO : Training has run successfully!
  60.  
  61. R0_RxClkDly_Margin==94 ps 8
  62. R0_TxDqDly_Margi==106 ps 9
  63.  
  64.  
  65. R1_RxClkDly_Margin==0 ps 0
  66. R1_TxDqDly_Margi==0 ps 0
  67.  
  68. dwc_ddrphy_apb_wr((0<<20)|(2<<16)|(0<<12)|(0xb0):0001
  69. 2D training succeed
  70. auto size-- 65535DDR cs0 size: 2048MB
  71. DDR cs1 size: 2048MB
  72. DMC_DDR_CTRL: 00600024DDR size: 3928MB
  73. cs0 DataBus test pass
  74. cs1 DataBus test pass
  75. cs0 AddrBus test pass
  76. cs1 AddrBus test pass
  77. pre test bdlr_100_average==430 bdlr_100_min==430 bdlr_100_max==430 bdlr_100_cur==430
  78. aft test bdlr_100_average==430 bdlr_100_min==430 bdlr_100_max==430 bdlr_100_cur==430
  79. non-sec scramble use zero key
  80. ddr scramble enabled
  81.  
  82. 100bdlr_step_size ps== 430
  83. result report
  84. boot times 0Enable ddr reg access
  85. Load FIP HDR from SD, src: 0x00010200, des: 0x01700000, size: 0x00004000, part: 0
  86. Load BL3X from SD, src: 0x0006c200, des: 0x0175c000, size: 0x00087600, part: 0
  87. 0.0;M3 CHK:0;cm4_sp_mode 0
  88. E30HDR
  89. MVN_1=0x00000000
  90. MVN_2=0x00000000
  91. [Image: g12b_v1.1.3375-8f9c8a7 2019-01-24 10:44:46 guotai.shen@droid11-sz]
  92. OPS=0x40
  93. ring efuse init
  94. chipver efuse init
  95. 29 0a 40 00 01 20 10 00 00 15 30 32 54 52 4d 50
  96. [0.019859 Inits done]
  97. secure task start!
  98. high task start!
  99. low task start!
  100. run into bl31
  101. NOTICE: BL31: v1.3(release):ab8811b
  102. NOTICE: BL31: Built : 15:03:31, Feb 12 2019
  103. NOTICE: BL31: G12A normal boot!
  104. NOTICE: BL31: BL33 decompress pass
  105. ERROR: Error initializing runtime service opteed_fast
  106.  
  107.  
  108. U-Boot 2019.10-00008-gca88313dcd (Oct 09 2019 - 11:25:25 +0530) odroid-n2
  109.  
  110. Model: Hardkernel ODROID-N2
  111. Soc: Amlogic Meson G12B (S922X) Revision 29:a (40:2)
  112. DRAM: 3.8 GiB
  113. MMC: sd@ffe05000: 0, mmc@ffe07000: 1
  114. In: serial@3000
  115. Out: serial@3000
  116. Err: serial@3000
  117. Net:
  118. Warning: ethernet@ff3f0000 (eth0) using random MAC address - 72:5f:c7:1e:d0:13
  119. eth0: ethernet@ff3f0000
  120. Hit any key to stop autoboot: 0
  121. switch to partitions #0, OK
  122. mmc0 is current device
  123. Scanning mmc 0:1...
  124. Found U-Boot script /boot/boot.scr
  125. 798 bytes read in 2 ms (389.6 KiB/s)
  126. ## Executing script at 08000000
  127. 27253248 bytes read in 1170 ms (22.2 MiB/s)
  128. 43524 bytes read in 5 ms (8.3 MiB/s)
  129. 7263143 bytes read in 313 ms (22.1 MiB/s)
  130. ## Flattened Device Tree blob at 08008000
  131. Booting using the fdt blob at 0x8008000
  132. Loading Ramdisk to f2858000, end f2f453a7 ... OK
  133. Loading Device Tree to 00000000f284a000, end 00000000f2857a03 ... OK
  134.  
  135. Starting kernel ...
  136.  
  137. [ 0.000000][ T0] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  138. [ 0.000000][ T0] Linux version 5.4.0-rc2-00038-ge3280b54afed-dirty (amoon@ThinkPad-T440s) (gcc version 8.3.0 (Ubuntu/Linaro 8.3.0-6ubuntu1)) #18 SMP PREEMPT Wed Oct 9 13:09:05 IST 2019
  139. [ 0.000000][ T0] Machine model: Hardkernel ODROID-N2
  140. [ 0.000000][ T0] efi: Getting EFI parameters from FDT:
  141. [ 0.000000][ T0] efi: UEFI not found.
  142. [ 0.000000][ T0] Reserved memory: created CMA memory pool at 0x00000000e2800000, size 256 MiB
  143. [ 0.000000][ T0] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
  144. [ 0.000000][ T0] NUMA: No NUMA configuration found
  145. [ 0.000000][ T0] NUMA: Faking a node at [mem 0x0000000000000000-0x00000000f4ffffff]
  146. [ 0.000000][ T0] NUMA: NODE_DATA [mem 0xf480e800-0xf480ffff]
  147. [ 0.000000][ T0] Zone ranges:
  148. [ 0.000000][ T0] DMA32 [mem 0x0000000000000000-0x00000000f4ffffff]
  149. [ 0.000000][ T0] Normal empty
  150. [ 0.000000][ T0] Movable zone start for each node
  151. [ 0.000000][ T0] Early memory node ranges
  152. [ 0.000000][ T0] node 0: [mem 0x0000000000000000-0x0000000004ffffff]
  153. [ 0.000000][ T0] node 0: [mem 0x0000000005300000-0x00000000f4ffffff]
  154. [ 0.000000][ T0] Initmem setup node 0 [mem 0x0000000000000000-0x00000000f4ffffff]
  155. [ 0.000000][ T0] psci: probing for conduit method from DT.
  156. [ 0.000000][ T0] psci: PSCIv1.0 detected in firmware.
  157. [ 0.000000][ T0] psci: Using standard PSCI v0.2 function IDs
  158. [ 0.000000][ T0] psci: MIGRATE_INFO_TYPE not supported.
  159. [ 0.000000][ T0] psci: SMC Calling Convention v1.1
  160. [ 0.000000][ T0] percpu: Embedded 22 pages/cpu s52952 r8192 d28968 u90112
  161. [ 0.000000][ T0] Detected VIPT I-cache on CPU0
  162. [ 0.000000][ T0] CPU features: detected: ARM erratum 845719
  163. [ 0.000000][ T0] Built 1 zonelists, mobility grouping on. Total pages: 987072
  164. [ 0.000000][ T0] Policy zone: DMA32
  165. [ 0.000000][ T0] Kernel command line: console=ttyAML0,115200n8 root=PARTUUID=45d7d61e-01 rw rootwait earlyprintk=serial,ttyAML0,115200 initcall_debug printk.time=y clk_ignore_unused
  166. [ 0.000000][ T0] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
  167. [ 0.000000][ T0] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
  168. [ 0.000000][ T0] mem auto-init: stack:off, heap alloc:off, heap free:off
  169. [ 0.000000][ T0] Memory: 3634288K/4011008K available (12156K kernel code, 2102K rwdata, 6848K rodata, 5440K init, 448K bss, 114576K reserved, 262144K cma-reserved)
  170. [ 0.000000][ T0] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  171. [ 0.000000][ T0] rcu: Preemptible hierarchical RCU implementation.
  172. [ 0.000000][ T0] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=6.
  173. [ 0.000000][ T0] Tasks RCU enabled.
  174. [ 0.000000][ T0] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  175. [ 0.000000][ T0] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  176. [ 0.000000][ T0] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  177. [ 0.000000][ T0] GIC: Using split EOI/Deactivate mode
  178. [ 0.000000][ T0] irq_meson_gpio: 100 to 8 gpio interrupt mux initialized
  179. [ 0.000000][ T0] random: get_random_bytes called from start_kernel+0x2b8/0x44c with crng_init=0
  180. [ 0.000000][ T0] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  181. [ 0.000000][ T0] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  182. [ 0.000003][ T0] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  183. [ 0.000282][ T0] Console: colour dummy device 80x25
  184. [ 0.000368][ T0] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  185. [ 0.000379][ T0] pid_max: default: 32768 minimum: 301
  186. [ 0.000455][ T0] LSM: Security Framework initializing
  187. [ 0.000519][ T0] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  188. [ 0.000540][ T0] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes, linear)
  189. [ 0.023946][ T1] ASID allocator initialised with 32768 entries
  190. [ 0.031923][ T1] rcu: Hierarchical SRCU implementation.
  191. [ 0.044626][ T1] EFI services will not be available.
  192. [ 0.051997][ T1] smp: Bringing up secondary CPUs ...
  193. [ 0.084339][ T0] Detected VIPT I-cache on CPU1
  194. [ 0.084386][ T0] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  195. [ 0.116844][ T0] CPU features: detected: ARM erratum 858921
  196. [ 0.116851][ T0] ARM_SMCCC_ARCH_WORKAROUND_1 missing from firmware
  197. [ 0.116857][ T0] Detected VIPT I-cache on CPU2
  198. [ 0.116880][ T0] arch_timer: Enabling local workaround for ARM erratum 858921
  199. [ 0.116894][ T0] arch_timer: CPU2: Trapping CNTVCT access
  200. [ 0.116902][ T0] CPU2: Booted secondary processor 0x0000000100 [0x410fd092]
  201. [ 0.148374][ T0] Detected VIPT I-cache on CPU3
  202. [ 0.148389][ T0] arch_timer: Enabling local workaround for ARM erratum 858921
  203. [ 0.148396][ T0] arch_timer: CPU3: Trapping CNTVCT access
  204. [ 0.148402][ T0] CPU3: Booted secondary processor 0x0000000101 [0x410fd092]
  205. [ 0.180424][ T0] Detected VIPT I-cache on CPU4
  206. [ 0.180438][ T0] arch_timer: Enabling local workaround for ARM erratum 858921
  207. [ 0.180445][ T0] arch_timer: CPU4: Trapping CNTVCT access
  208. [ 0.180450][ T0] CPU4: Booted secondary processor 0x0000000102 [0x410fd092]
  209. [ 0.212478][ T0] Detected VIPT I-cache on CPU5
  210. [ 0.212492][ T0] arch_timer: Enabling local workaround for ARM erratum 858921
  211. [ 0.212499][ T0] arch_timer: CPU5: Trapping CNTVCT access
  212. [ 0.212504][ T0] CPU5: Booted secondary processor 0x0000000103 [0x410fd092]
  213. [ 0.212578][ T1] smp: Brought up 1 node, 6 CPUs
  214. [ 0.212636][ T1] SMP: Total of 6 processors activated.
  215. [ 0.212644][ T1] CPU features: detected: 32-bit EL0 Support
  216. [ 0.212651][ T1] CPU features: detected: CRC32 instructions
  217. [ 0.219959][ T1] CPU: All CPU(s) started at EL2
  218. [ 0.220010][ T11] alternatives: patching kernel code
  219. [ 0.220942][ T1] devtmpfs: initialized
  220. [ 0.229011][ T1] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  221. [ 0.229039][ T1] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
  222. [ 0.235317][ T1] pinctrl core: initialized pinctrl subsystem
  223. [ 0.237223][ T1] DMI not present or invalid.
  224. [ 0.237654][ T1] NET: Registered protocol family 16
  225. [ 0.241696][ T1] DMA: preallocated 256 KiB pool for atomic allocations
  226. [ 0.241734][ T1] audit: initializing netlink subsys (disabled)
  227. [ 0.241896][ T44] audit: type=2000 audit(0.240:1): state=initialized audit_enabled=0 res=1
  228. [ 0.243818][ T1] cpuidle: using governor menu
  229. [ 0.244206][ T1] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  230. [ 0.246386][ T1] Serial: AMBA PL011 UART driver
  231. [ 0.265937][ T1] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
  232. [ 0.265946][ T1] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
  233. [ 0.265952][ T1] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  234. [ 0.265958][ T1] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
  235. [ 0.268130][ T1] cryptd: max_cpu_qlen set to 1000
  236. [ 0.272093][ T1] ACPI: Interpreter disabled.
  237. [ 0.273733][ T1] 5V: supplied by 12V
  238. [ 0.274540][ T1] VDDAO_3V3: supplied by 12V
  239. [ 0.275441][ T1] iommu: Default domain type: Translated
  240. [ 0.275686][ T1] vgaarb: loaded
  241. [ 0.276026][ T1] SCSI subsystem initialized
  242. [ 0.276421][ T1] usbcore: registered new interface driver usbfs
  243. [ 0.276455][ T1] usbcore: registered new interface driver hub
  244. [ 0.276515][ T1] usbcore: registered new device driver usb
  245. [ 0.277437][ T1] pps_core: LinuxPPS API ver. 1 registered
  246. [ 0.277444][ T1] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  247. [ 0.277470][ T1] PTP clock support registered
  248. [ 0.277623][ T1] EDAC MC: Ver: 3.0.0
  249. [ 0.279021][ T1] FPGA manager framework
  250. [ 0.279135][ T1] Advanced Linux Sound Architecture Driver Initialized.
  251. [ 0.279902][ T1] clocksource: Switched to clocksource arch_sys_counter
  252. [ 0.280140][ T1] VFS: Disk quotas dquot_6.6.0
  253. [ 0.280191][ T1] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  254. [ 0.280718][ T1] pnp: PnP ACPI: disabled
  255. [ 0.285498][ T1] thermal_sys: Registered thermal governor 'step_wise'
  256. [ 0.285501][ T1] thermal_sys: Registered thermal governor 'power_allocator'
  257. [ 0.285956][ T1] NET: Registered protocol family 2
  258. [ 0.286259][ T1] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes, linear)
  259. [ 0.286308][ T1] TCP established hash table entries: 32768 (order: 6, 262144 bytes, linear)
  260. [ 0.286517][ T1] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linear)
  261. [ 0.286914][ T1] TCP: Hash tables configured (established 32768 bind 32768)
  262. [ 0.287051][ T1] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
  263. [ 0.287129][ T1] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
  264. [ 0.287354][ T1] NET: Registered protocol family 1
  265. [ 0.287690][ T1] RPC: Registered named UNIX socket transport module.
  266. [ 0.287697][ T1] RPC: Registered udp transport module.
  267. [ 0.287702][ T1] RPC: Registered tcp transport module.
  268. [ 0.287707][ T1] RPC: Registered tcp NFSv4.1 backchannel transport module.
  269. [ 0.287740][ T1] PCI: CLS 0 bytes, default 64
  270. [ 0.287923][ T1] Unpacking initramfs...
  271. [ 0.571602][ T1] Freeing initrd memory: 7092K
  272. [ 0.572485][ T1] kvm [1]: IPA Size Limit: 40bits
  273. [ 0.573209][ T1] kvm [1]: vgic interrupt IRQ1
  274. [ 0.573337][ T1] kvm [1]: Hyp mode initialized successfully
  275. [ 0.654680][ T1] Initialise system trusted keyrings
  276. [ 0.654881][ T1] workingset: timestamp_bits=44 max_order=20 bucket_order=0
  277. [ 0.660842][ T1] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  278. [ 0.661556][ T1] NFS: Registering the id_resolver key type
  279. [ 0.661583][ T1] Key type id_resolver registered
  280. [ 0.661589][ T1] Key type id_legacy registered
  281. [ 0.661611][ T1] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  282. [ 0.661812][ T1] 9p: Installing v9fs 9p2000 file system support
  283. [ 0.677436][ T1] Key type asymmetric registered
  284. [ 0.677452][ T1] Asymmetric key parser 'x509' registered
  285. [ 0.677508][ T1] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  286. [ 0.677523][ T1] io scheduler mq-deadline registered
  287. [ 0.677537][ T1] io scheduler kyber registered
  288. [ 0.684557][ T1] GPIO line 447 (usb-hub-reset) hogged as output/high
  289. [ 0.691063][ T1] EINJ: ACPI disabled.
  290. [ 0.702859][ T1] soc soc0: Amlogic Meson G12B (S922X) Revision 29:a (40:2) Detected
  291. [ 0.706496][ T1] pwm-regulator regulator-vddcpu-a: Failed to get PWM: -517
  292. [ 0.706568][ T1] pwm-regulator regulator-vddcpu-b: Failed to get PWM: -517
  293. [ 0.710340][ T1] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  294. [ 0.712854][ T1] SuperH (H)SCI(F) driver initialized
  295. [ 0.713491][ T1] ff803000.serial: ttyAML0 at MMIO 0xff803000 (irq = 12, base_baud = 1500000) is a meson_uart
  296. [ 1.714922][ T1] printk: console [ttyAML0] enabled
  297. [ 1.720539][ T1] msm_serial: driver initialized
  298. [ 1.734192][ T1] loop: module loaded
  299. [ 1.739667][ T1] libphy: Fixed MDIO Bus: probed
  300. [ 1.740019][ T1] tun: Universal TUN/TAP device driver, 1.6
  301. [ 1.745532][ T1] thunder_xcv, ver 1.0
  302. [ 1.748492][ T1] thunder_bgx, ver 1.0
  303. [ 1.752334][ T1] nicpf, ver 1.0
  304. [ 1.756476][ T1] hclge is initializing
  305. [ 1.759621][ T1] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
  306. [ 1.767474][ T1] hns3: Copyright (c) 2017 Huawei Corporation.
  307. [ 1.773485][ T1] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  308. [ 1.779894][ T1] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  309. [ 1.786484][ T1] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
  310. [ 1.794035][ T1] igb: Copyright (c) 2007-2014 Intel Corporation.
  311. [ 1.800291][ T1] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  312. [ 1.808698][ T1] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  313. [ 1.815718][ T1] sky2: driver version 1.30
  314. [ 1.820490][ T1] VFIO - User Level meta-driver version: 0.3
  315. [ 1.827507][ T1] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  316. [ 1.832558][ T1] ehci-pci: EHCI PCI platform driver
  317. [ 1.837641][ T1] ehci-platform: EHCI generic platform driver
  318. [ 1.843653][ T1] ehci-orion: EHCI orion driver
  319. [ 1.848262][ T1] ehci-exynos: EHCI EXYNOS driver
  320. [ 1.853069][ T1] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  321. [ 1.859790][ T1] ohci-pci: OHCI PCI platform driver
  322. [ 1.864900][ T1] ohci-platform: OHCI generic platform driver
  323. [ 1.870872][ T1] ohci-exynos: OHCI EXYNOS driver
  324. [ 1.876198][ T1] usbcore: registered new interface driver usb-storage
  325. [ 1.886021][ T1] i2c /dev entries driver
  326. [ 1.893402][ T1] sdhci: Secure Digital Host Controller Interface driver
  327. [ 1.894625][ T1] sdhci: Copyright(c) Pierre Ossman
  328. [ 1.900290][ T1] Synopsys Designware Multimedia Card Interface Driver
  329. [ 1.907775][ T1] VCC_3V3: supplied by VDDAO_3V3
  330. [ 1.911130][ T1] FLASH_1V8: supplied by VCC_3V3
  331. [ 1.915925][ T1] meson-gx-mmc ffe07000.mmc: allocated mmc-pwrseq
  332. [ 1.949393][ T1] sdhci-pltfm: SDHCI platform and OF driver helper
  333. [ 1.952812][ T1] ledtrig-cpu: registered to indicate activity on CPUs
  334. [ 1.957555][ T1] meson-sm: secure-monitor enabled
  335. [ 1.963061][ T1] usbcore: registered new interface driver usbhid
  336. [ 1.967961][ T1] usbhid: USB HID core driver
  337. [ 1.976355][ T1] NET: Registered protocol family 17
  338. [ 1.977559][ T1] 9pnet: Installing 9P2000 support
  339. [ 1.982417][ T1] Key type dns_resolver registered
  340. [ 1.987607][ T1] registered taskstats version 1
  341. [ 1.992031][ T1] Loading compiled-in X.509 certificates
  342. [ 2.007294][ T43] VCC_1V8: supplied by VCC_3V3
  343. [ 2.007349][ T43] VDDAO_1V8: supplied by VDDAO_3V3
  344. [ 2.011427][ T43] HUB_5V: supplied by 5V
  345. [ 2.015479][ T43] USB_PWR_EN: supplied by 5V
  346. [ 2.021509][ T43] pwm-regulator regulator-vddcpu-a: Failed to get PWM: -517
  347. [ 2.027304][ T43] pwm-regulator regulator-vddcpu-b: Failed to get PWM: -517
  348. [ 2.034511][ T43] dwc3-meson-g12a ffe09000.usb: USB2 ports: 2
  349. [ 2.039659][ T43] dwc3-meson-g12a ffe09000.usb: USB3 ports: 1
  350. [ 2.048652][ T43] dwc2 ff400000.usb: ff400000.usb supply vusb_d not found, using dummy regulator
  351. [ 2.054444][ T43] dwc2 ff400000.usb: ff400000.usb supply vusb_a not found, using dummy regulator
  352. [ 2.063416][ T43] dwc2 ff400000.usb: EPs: 7, dedicated fifos, 712 entries in SPRAM
  353. [ 2.071731][ T43] dwc3 ff500000.usb: Failed to get clk 'ref': -2
  354. [ 2.077117][ T43] dwc3 ff500000.usb: IRQ host not found
  355. [ 2.082436][ T43] dwc3 ff500000.usb: IRQ dwc_usb3 not found
  356. [ 2.088342][ T43] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  357. [ 2.094263][ T43] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
  358. [ 2.102627][ T43] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228fe6c hci version 0x110 quirks 0x0000000000010010
  359. [ 2.112555][ T43] xhci-hcd xhci-hcd.0.auto: irq 22, io mem 0xff500000
  360. [ 2.119552][ T43] hub 1-0:1.0: USB hub found
  361. [ 2.123508][ T43] hub 1-0:1.0: 2 ports detected
  362. [ 2.128341][ T43] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  363. [ 2.134278][ T43] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
  364. [ 2.142556][ T43] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  365. [ 2.149737][ T43] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
  366. [ 2.158697][ T43] hub 2-0:1.0: USB hub found
  367. [ 2.162833][ T43] hub 2-0:1.0: 1 port detected
  368. [ 2.167600][ T43] dwc3-meson-g12a ffe09000.usb: switching to Device Mode
  369. [ 2.175384][ T43] meson-gx-mmc ffe05000.sd: Got CD GPIO
  370. [ 2.206123][ T43] pwm-regulator regulator-vddcpu-a: Failed to get PWM: -517
  371. [ 2.208244][ T43] pwm-regulator regulator-vddcpu-b: Failed to get PWM: -517
  372. [ 2.215463][ T174] pwm-regulator regulator-vddcpu-a: Failed to get PWM: -517
  373. [ 2.222252][ T174] pwm-regulator regulator-vddcpu-b: Failed to get PWM: -517
  374. [ 2.229527][ T1] hctosys: unable to open rtc device (rtc0)
  375. [ 2.234913][ T1] clk: Not disabling unused clocks
  376. [ 2.239557][ T1] ALSA device list:
  377. [ 2.243137][ T1] No soundcards found.
  378. [ 2.254350][ T1] Freeing unused kernel memory: 5440K
  379. [ 2.254454][ T1] Run /init as init process
  380. [ 2.270070][ T43] mmc1: new high speed SDHC card at address 0001
  381. [ 2.271052][ T43] mmcblk1: mmc1:0001 00000 14.6 GiB
  382. [ 2.277057][ T43] mmcblk1: p1
  383. [ 2.279860][ T43] pwm-regulator regulator-vddcpu-a: Failed to get PWM: -517
  384. [ 2.286740][ T43] pwm-regulator regulator-vddcpu-b: Failed to get PWM: -517
  385. :: running early hook [udev]
  386. Warning: /lib/modules/5.4.0-rc2-00038-ge3280b54afed-dirty/modules.devname not found - ignoring
  387. Starting version 242.84-1-arch
  388. :: running hook [udev]
  389. :: Triggering uevents...
  390. [ 2.467956][ T41] usb 1-1: new high-speed USB device number 2 using xhci-hcd
  391. [ 2.662044][ T41] hub 1-1:1.0: USB hub found
  392. [ 2.662309][ T41] hub 1-1:1.0: 4 ports detected
  393. [ 2.730018][ T41] pwm-regulator regulator-vddcpu-a: Failed to get PWM: -517
  394. [ 2.732793][ T41] pwm-regulator regulator-vddcpu-b: Failed to get PWM: -517
  395. [ 2.744056][ T5] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
  396. [ 2.765853][ C0] random: fast init done
  397. [ 2.789999][ T5] hub 2-1:1.0: USB hub found
  398. [ 2.790321][ T5] hub 2-1:1.0: 4 ports detected
  399. [ 2.797006][ T5] pwm-regulator regulator-vddcpu-a: Failed to get PWM: -517
  400. [ 2.801835][ T5] pwm-regulator regulator-vddcpu-b: Failed to get PWM: -517
  401. :: performing fsck on '/dev/mmcblk1p1'
  402. rootfs: clean, 42347/958464 files, 978334/3833856 blocks
  403. :: mounting '/dev/mmcblk1p1' on real root
  404. [ 3.035923][ T31] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd
  405. [ 3.239163][ T31] input: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.0/0003:24AE:1000.0001/input/input0
  406. [ 3.308157][ T31] hid-generic 0003:24AE:1000.0001: input: USB HID v1.10 Keyboard [MOSART Semi. Rapoo 2.4G Wireless Touch Desktop ] on usb-xhci-hcd.0.auto-1.1/input0
  407. [ 3.317934][ T173] pwm-regulator regulator-vddcpu-a: Failed to get PWM: -517
  408. [ 3.325069][ T173] pwm-regulator regulator-vddcpu-b: Failed to get PWM: -517
  409. [ 3.333697][ T31] input: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop Mouse as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:24AE:1000.0002/input/input1
  410. [ 3.349790][ T31] input: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop Consumer Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:24AE:1000.0002/input/input2
  411. [ 3.428044][ T31] input: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop System Control as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:24AE:1000.0002/input/input3
  412. [ 3.441483][ T31] input: MOSART Semi. Rapoo 2.4G Wireless Touch Desktop as /devices/platform/soc/ffe09000.usb/ff500000.usb/xhci-hcd.0.auto/usb1/1-1/1-1.1/1-1.1:1.1/0003:24AE:1000.0002/input/input4
  413. [ 3.459011][ T31] hid-generic 0003:24AE:1000.0002: input: USB HID v1.10 Mouse [MOSART Semi. Rapoo 2.4G Wireless Touch Desktop ] on usb-xhci-hcd.0.auto-1.1/input1
  414. [ 3.473983][ T31] pwm-regulator regulator-vddcpu-a: Failed to get PWM: -517
  415. [ 3.481240][ T31] pwm-regulator regulator-vddcpu-b: Failed to get PWM: -517
  416. [ 3.491400][ T222] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Opts: (null)
  417. :: running cleanup hook [udev]
  418. [ 4.070671][ T1] systemd[1]: System time before build time, advancing clock.
  419. [ 4.937423][ T1] NET: Registered protocol family 10
  420. [ 4.937932][ T1] Segment Routing with IPv6
  421. [ 5.030361][ T1] systemd[1]: systemd 242.84-1-arch running in system mode. (+PAM +AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
  422. [ 5.047818][ T1] systemd[1]: Detected architecture arm64.
  423.  
  424. Welcome to Arch Linux ARM!
  425.  
  426. [ 5.084517][ T1] systemd[1]: Set hostname to <alarm>.
  427. [ 5.428630][ T1] systemd[1]: File /usr/lib/systemd/system/systemd-journald.service:14 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  428. [ 5.441000][ T1] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  429. [ 5.599304][ T1] random: systemd: uninitialized urandom read (16 bytes read)
  430. [ 5.601019][ T1] systemd[1]: Reached target Remote File Systems.
  431. [ OK ] Reached target Remote File Systems.
  432. [ 5.624124][ T1] random: systemd: uninitialized urandom read (16 bytes read)
  433. [ 5.625970][ T1] systemd[1]: Listening on Network Service Netlink Socket.
  434. [ OK ] Listening on Network Service Netlink Socket.
  435. [ 5.651960][ T1] random: systemd: uninitialized urandom read (16 bytes read)
  436. [ 5.653723][ T1] systemd[1]: Listening on initctl Compatibility Named Pipe.
  437. [ OK ] Listening on initctl Compatibility Named Pipe.
  438. [ 5.680168][ T1] systemd[1]: Listening on Journal Socket (/dev/log).
  439. [ OK ] Listening on Journal Socket (/dev/log).
  440. [ 5.699982][ T1] systemd[1]: Condition check resulted in Arbitrary Executable File Formats File System Automount Point being skipped.
  441. [ OK ] Started Forward Password R?uests to Wall Directory Watch.
  442. [ OK ] Listening on udev Control Socket.
  443. [ OK ] Listening on udev Kernel Socket.
  444. [ OK ] Listening on Journal Audit Socket.
  445. [ OK ] Listening on Device-mapper event daemon FIFOs.
  446. [ OK ] Created slice system-serial\x2dgetty.slice.
  447. [ OK ] Created slice User and Session Slice.
  448. [ OK ] Reached target Slices.
  449. [ OK ] Listening on Journal Socket.
  450. Starting Apply Kernel Variables...
  451. Mounting Kernel Configuration File System...
  452. Mounting Huge Pages File System...
  453. Starting Remount Root and Kernel File Systems...
  454. Starting udev Coldplug all Devices...
  455. [ OK ] Started Dispatch Password ?ts to Console Directory Watch.
  456. [ OK ] Reached target Local Encrypted Volumes.
  457. [ OK ] Listening on LVM2 metadata daemon socket.
  458. Starting Monitoring of LVM?meventd or progress polling...
  459. [ OK ] Reached target Paths.
  460. [ OK ] Created slice system-getty.slice.
  461. [ OK ] Reached target Swap.
  462. Mounting Temporary Directory (/tmp)...
  463. Mounting POSIX Message Queue File System...
  464. Mounting Kernel Debug File System...
  465. [ OK ] Listening on Process Core Dump Socket.
  466. Starting Journal Service...
  467. Starting Create list of re?odes for the current kernel...
  468. [ OK ] Listening on LVM2 poll daemon socket.
  469. [ OK ] Started Apply Kernel Variables.
  470. [ OK ] Mounted Kernel Configuration File System.
  471. [ OK ] Mounted Huge Pages File System.
  472. [ OK ] Started Remount Root and Kernel File Systems.
  473. [ OK ] Mounted Temporary Directory (/tmp).
  474. [ OK ] Mounted POSIX Message Queue File System.
  475. [ OK ] Mounted Kernel Debug File System.
  476. [ OK ] Started Create list of req? nodes for the current kernel.
  477. [ OK ] Started LVM2 metadata daemon.
  478. Starting Create Static Device Nodes in /dev...
  479. Starting Load/Save Random Seed...
  480. [ OK ] Started udev Coldplug all Devices.
  481. [ OK ] Started Create Static Device Nodes in /dev.
  482. [ OK ] Started Load/Save Random Seed.
  483. Starting udev Kernel Device Manager...
  484. [ OK ] Started Journal Service.
  485. [ 6.732182][ T44] audit: type=1130 audit(1563803537.660:2): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  486. Starting Flush Journal to Persistent Storage...
  487. [ 6.768823][ T256] systemd-journald[256]: Received request to flush runtime journal from PID 1
  488. [ 6.774271][ T256] systemd-journald[256]: File /var/log/journal/06d115e213bf46e8825651d65d51d835/system.journal corrupted or uncleanly shut down, renaming and replacing.
  489. [ OK ] Started Flush Journal to Persistent Storage.
  490. [ 7.204066][ T44] audit: type=1130 audit(1563803538.132:3): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  491. [ OK ] Started udev Kernel Device Manager.
  492. [ 7.500139][ T44] audit: type=1130 audit(1563803538.428:4): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  493. Starting Network Service...
  494. [ 7.678292][ T31] pwm-regulator regulator-vddcpu-a: Failed to get PWM: -517
  495. [ 7.680681][ T31] pwm-regulator regulator-vddcpu-b: Failed to get PWM: -517
  496. [ OK ] Found device /dev/ttyAML0.
  497. [ 7.781669][ T31] pwm-regulator regulator-vddcpu-a: Failed to get PWM: -517
  498. [ 7.784049][ T31] pwm-regulator: supplied by regulator-dummy
  499. [ 7.790075][ T294] meson-vrtc ff8000a8.rtc: registered as rtc0
  500. [ 7.791114][ T31] cpu cpu2: Failed to set regulator for cpu2: -517
  501. [ 7.801228][ T31] cpu cpu3: Failed to set regulator for cpu3: -517
  502. [ 7.801298][ T31] cpu cpu4: Failed to set regulator for cpu4: -517
  503. [ 7.813831][ T31] cpu cpu5: Failed to set regulator for cpu5: -517
  504. [ 7.820595][ T31] pwm-regulator: supplied by regulator-dummy
  505. [ 8.543908][ T286] Registered IR keymap rc-odroid
  506. [ OK ] Started Network Service.
  507. [ 8.564103][ T44] audit: type=1130 audit(1563803539.492:5): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-networkd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  508. [ 8.571918][ T286] rc_core: Loaded IR protocol module ir-nec-decoder, but protocol nec still not available
  509. [ 8.587599][ T286] rc rc0: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0
  510. [ 8.596064][ T286] input: meson-ir as /devices/platform/soc/ff800000.bus/ff808000.ir/rc/rc0/input5
  511. [ 8.605181][ T286] meson-ir ff808000.ir: receiver initialized
  512. [ 9.182788][ T290] meson8b-dwmac ff3f0000.ethernet: IRQ eth_wake_irq not found
  513. [ 9.184485][ T290] meson8b-dwmac ff3f0000.ethernet: IRQ eth_lpi not found
  514. [ 9.191334][ T290] meson8b-dwmac ff3f0000.ethernet: PTP uses main clock
  515. [ 9.197923][ T290] meson8b-dwmac ff3f0000.ethernet: no reset control found
  516. [ 9.205599][ T290] meson8b-dwmac ff3f0000.ethernet: User ID: 0x11, Synopsys ID: 0x37
  517. [ 9.212584][ T290] meson8b-dwmac ff3f0000.ethernet: DWMAC1000
  518. [ 9.218448][ T290] meson8b-dwmac ff3f0000.ethernet: DMA HW capability register supported
  519. [ 9.226555][ T290] meson8b-dwmac ff3f0000.ethernet: RX Checksum Offload Engine supported
  520. [ 9.234694][ T290] meson8b-dwmac ff3f0000.ethernet: COE Type 2
  521. [ 9.240535][ T290] meson8b-dwmac ff3f0000.ethernet: TX Checksum insertion supported
  522. [ 9.248228][ T290] meson8b-dwmac ff3f0000.ethernet: Wake-Up On Lan supported
  523. [ 9.255293][ T290] meson8b-dwmac ff3f0000.ethernet: Normal descriptors
  524. [ 9.261825][ T290] meson8b-dwmac ff3f0000.ethernet: Ring mode enabled
  525. [ 9.268289][ T290] meson8b-dwmac ff3f0000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  526. [ 9.276917][ T290] meson8b-dwmac ff3f0000.ethernet: device MAC address 72:5f:c7:1e:d0:13
  527. [ 9.285179][ T290] libphy: stmmac: probed
  528. [ 9.291601][ T259] libphy: mdio_mux: probed
  529. [ OK ] Started Monitoring of LVM2? dmeventd or progress polling.
  530. [ 9.344072][ T44] audit: type=1130 audit(1563803540.272:6): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  531. [ OK ] Reached target Local File Systems (Pre).
  532. [ OK ] Reached target Local File Systems.
  533. Starting Create Volatile Files and Directories...
  534. [ 9.428418][ T259] libphy: mdio_mux: probed
  535. [ 9.480457][ T280] meson8b-dwmac ff3f0000.ethernet eth0: PHY [0.0:00] driver [RTL8211F Gigabit Ethernet]
  536. [ 9.546839][ T280] meson8b-dwmac ff3f0000.ethernet eth0: No Safety Features support found
  537. [ 9.549464][ T280] meson8b-dwmac ff3f0000.ethernet eth0: PTP not supported by HW
  538. [ 9.556880][ T280] meson8b-dwmac ff3f0000.ethernet eth0: configuring for phy/rgmii link mode
  539. [ OK ] Started Create Volatile Files and Directories.
  540. [ 10.008110][ T44] audit: type=1130 audit(1563803540.936:7): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  541. Starting Network Time Synchronization...
  542. Starting Entropy Harvesting Daemon...
  543. Starting Network Name Resolution...
  544. Starting Update UTMP about System Boot/Shutdown...
  545. [ OK ] Started Entropy Harvesting Daemon.
  546. [ 10.106632][ T44] audit: type=1127 audit(1563803541.032:8): pid=318 uid=0 auid=4294967295 ses=4294967295 msg=' comm="systemd-update-utmp" exe="/usr/lib/systemd/systemd-update-utmp" hostname=? addr=? terminal=? res=success'
  547. [ 10.136170][ T44] audit: type=1130 audit(1563803541.064:9): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=haveged comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  548. [ OK ] Started Update UTMP about System Boot/Shutdown.
  549. [ 10.168145][ T44] audit: type=1130 audit(1563803541.096:10): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-update-utmp comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  550. [ 10.385922][ T279] meson-drm ff900000.vpu: Queued 2 outputs on vpu
  551. [ 10.430989][ T283] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  552. [ 10.432677][ T283] [drm] No driver support for vblank timestamp query.
  553. [ 10.439275][ T283] meson-drm ff900000.vpu: CVBS Output connector not available
  554. [ 10.471958][ T283] meson-dw-hdmi ff600000.hdmi-tx: Detected HDMI TX controller v2.01a with HDCP (meson_dw_hdmi_phy)
  555. [ 10.477258][ T283] meson-dw-hdmi ff600000.hdmi-tx: registered DesignWare HDMI I2C bus driver
  556. [ 10.486118][ T283] meson-drm ff900000.vpu: bound ff600000.hdmi-tx (ops meson_dw_hdmi_ops [meson_dw_hdmi])
  557. [ 10.495181][ T283] [drm] Initialized meson 1.0.0 20161109 for ff900000.vpu on minor 0
  558. [ OK ] Started Network Time Synchronization.
  559. [ 10.520129][ T44] audit: type=1130 audit(1563803541.448:11): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-timesyncd comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  560. [ 10.669803][ T283] Console: switching to colour frame buffer device 100x37
  561. [ 10.711397][ T283] meson-drm ff900000.vpu: fb0: mesondrmfb frame buffer device
  562. [ OK ] Reached target System Time Set.
  563. [ OK ] Reached target System Time Synchronized.
  564. [ OK ] Reached target System Initialization.
  565. [ OK ] Started Daily Cleanup of Temporary Directories.
  566. [ OK ] Started Daily verification of passwo[ 10.786364][ T174] axg-sound-card sound: snd-soc-dummy-dai <-> ff6421c0.audio-controller mapping ok
  567. [ 10.795064][ T174] axg-sound-card sound: snd-soc-dummy-dai <-> ff642200.audio-controller mapping ok
  568. [ 10.804068][ T174] axg-sound-card sound: snd-soc-dummy-dai <-> ff642240.audio-controller mapping ok
  569. [ 10.812752][ T174] axg-sound-card sound: I2S IN B <-> TDM Pad mapping ok
  570. [ 10.818899][ T174] axg-sound-card sound: snd-soc-dummy-dai <-> TDM Loopback mapping ok
  571. [ 10.826830][ T174] axg-sound-card sound: i2s-hifi <-> I2S OUT mapping ok
  572. [ 10.833597][ T174] axg-sound-card sound: ASoC: no DMI vendor name!
  573. rd and group files.
  574. [ OK ] Listening on D-Bus System Message Bus Socket.
  575. [ OK ] Reached target Sockets.
  576. [ OK ] Started Daily rotation of log files.
  577. [ OK ] Reached target Basic System.
  578. Starting Login Service...
  579. [ OK ] Started Daily man-db regeneration.
  580. [ OK ] Reached target Timers.
  581. [ OK ] Started D-Bus System Message Bus.
  582. [ OK ] Started Network Name Resolution.
  583. [ OK ] Reached target Sound Card.
  584. [ OK ] Reached target Network.
  585. [ OK ] Started OpenSSH Daemon.
  586. Starting Permit User Sessions...
  587. [ OK ] Reached target Host and Network Name Lookups.
  588. [ OK ] Started Permit User Sessions.
  589. [ OK ] Started Getty on tty1.
  590. [ OK ] Started Serial Getty on ttyAML0.
  591. [ OK ] Reached target Login Prompts.
  592. [ OK ] Started Login Service.
  593. [ OK ] Reached target Multi-User System.
  594. [ OK ] Reached target Graphical Interface.
  595. [ 11.779304][ T319] random: crng init done
  596. [ 11.779329][ T319] random: 7 urandom warning(s) missed due to ratelimiting
  597.  
  598. Arch Linux 5.4.0-rc2-00038-ge3280b54afed-dirty (ttyAML0)
  599.  
  600. alarm login: [ 12.643735][ T51] meson8b-dwmac ff3f0000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  601. [ 12.647411][ T43] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  602. [ 33.759926][ T43] USB_PWR_EN: disabling
  603. [ 45.994452][ T44] kauditd_printk_skb: 7 callbacks suppressed
  604. [ 45.994458][ T44] audit: type=1130 audit(1570608037.220:19): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=shadow comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  605. [ 46.076920][ T44] audit: type=1131 audit(1570608037.304:20): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=shadow comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  606. [ 46.104939][ T44] audit: type=1130 audit(1570608037.332:21): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=logrotate comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  607. [ 46.118314][ T44] audit: type=1131 audit(1570608037.332:22): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=logrotate comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  608. [ 264.354363][ T44] audit: type=1130 audit(1570608255.529:23): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=man-db comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  609. [ 264.367348][ T44] audit: type=1131 audit(1570608255.529:24): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=man-db comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  610.  
  611. alarm login: root
  612. Password:
  613. [ 410.210345][ T44] audit: type=1006 audit(1570608401.361:25): pid=328 uid=0 old-auid=4294967295 auid=0 tty=ttyAML0 old-ses=4294967295 ses=1 res=1
  614. [ 410.264095][ T44] audit: type=1130 audit(1570608401.417:26): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user-runtime-dir@0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  615. [ 410.283889][ T44] audit: type=1006 audit(1570608401.437:27): pid=9070 uid=0 old-auid=4294967295 auid=0 tty=(none) old-ses=4294967295 ses=2 res=1
  616. [ 410.419544][ T44] audit: type=1130 audit(1570608401.573:28): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=user@0 comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  617. Last login: Mon Jul 22 13:53:17 on ttyAML0
  618. [root@alarm ~]# lsusb -t
  619. /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
  620. |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 5000M
  621. /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/2p, 480M
  622. |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
  623. |__ Port 1: Dev 3, If 0, Class=Human Interface Device, Driver=usbhid, 12M
  624. |__ Port 1: Dev 3, If 1, Class=Human Interface Device, Driver=usbhid, 12M
  625. [root@alarm ~]# [ 500.677330][ T307] rc rc0: two consecutive events of type space
  626.  
  627. [root@alarm ~]#
  628. [root@alarm ~]# pacman-key --init
  629. gpg: /etc/pacman.d/gnupg/trustdb.gpg: trustdb created
  630. gpg: no ultimately trusted keys found
  631. gpg: starting migration from earlier GnuPG versions
  632. gpg: porting secret keys from '/etc/pacman.d/gnupg/secring.gpg' to gpg-agent
  633. gpg: migration succeeded
  634. gpg: Generating pacman keyring master key...
  635.  
  636. gpg: key 7012913DE9C99E55 marked as ultimately trusted
  637. gpg: directory '/etc/pacman.d/gnupg/openpgp-revocs.d' created
  638. gpg: revocation certificate stored as '/etc/pacman.d/gnupg/openpgp-revocs.d/B8884AC479981F84C62F10D27012913DE9C99E55.rev'
  639. gpg: Done
  640. ==> Updating trust database...
  641. gpg: marginals needed: 3 completes needed: 1 trust model: pgp
  642. gpg: depth: 0 valid: 1 signed: 0 trust: 0-, 0q, 0n, 0m, 0f, 1u
  643. [root@alarm ~]# pacman-key --populate archlinuxarm
  644. ==> Appending keys from archlinuxarm.gpg...
  645. ==> Locally signing trusted keys in keyring...
  646. -> Locally signing key 69DD6C8FD314223E14362848BF7EEF7A9C6B5765...
  647. -> Locally signing key 02922214DE8981D14DC2ACABBC704E86B823CD25...
  648. -> Locally signing key 9D22B7BB678DC056B1F7723CB55C5315DCD9EE1A...
  649. ==> Importing owner trust values...
  650. gpg: setting ownertrust to 4
  651. gpg: inserting ownertrust of 4
  652. gpg: setting ownertrust to 4
  653. ==> Updating trust database...
  654. gpg: marginals needed: 3 completes needed: 1 trust model: pgp
  655. gpg: depth: 0 valid: 1 signed: 3 trust: 0-, 0q, 0n, 0m, 0f, 1u
  656. gpg: depth: 1 valid: 3 signed: 1 trust: 0-, 0q, 0n, 3m, 0f, 0u
  657. gpg: depth: 2 valid: 1 signed: 0 trust: 1-, 0q, 0n, 0m, 0f, 0u
  658. [root@alarm ~]#
  659. [root@alarm ~]#
  660. [root@alarm ~]# pacman -Syu
  661. :: Synchronizing package databases...
  662. error: failed retrieving file 'core.db' from mirror.archlinuxarm.org : Resolving timed out after 10000 milliseconds
  663. error: failed retrieving file 'core.db' from au.mirror.archlinuxarm.org : Resolving timed out after 10000 milliseconds
  664. error: failed retrieving file 'core.db' from br2.mirror.archlinuxarm.org : Resolving timed out after 10000 milliseconds
  665. core 191.3 KiB 142K/s 00:01 [######################] 100%
  666. extra 2.2 MiB 250K/s 00:09 [######################] 100%
  667. community 4.6 MiB 1091K/s 00:04 [######################] 100%
  668. alarm 47.0 KiB 192K/s 00:00 [######################] 100%
  669. aur is up to date
  670. :: Starting full system upgrade...
  671. resolving dependencies...
  672. looking for conflicting packages...
  673.  
  674. Packages (68) bash-5.0.011-1 ca-certificates-mozilla-3.46.1-1
  675. coreutils-8.31-2 cryptsetup-2.2.1-1 curl-7.66.0-1
  676. dbus-1.12.16-2 device-mapper-2.02.186-2 diffutils-3.7-2
  677. e2fsprogs-1.45.4-1 file-5.37-3 filesystem-2019.10-1
  678. findutils-4.7.0-1 gawk-5.0.1-1 gettext-0.20.1-2 glib2-2.62.1-1
  679. gnutls-3.6.10-1 grep-3.3-2 gzip-1.10-2 haveged-1.9.8-1
  680. hwids-20190818-1 iana-etc-20190930-1 iproute2-5.3.0-1
  681. iputils-20190709-1 kbd-2.2.0-3 keyutils-1.6.1-1 less-551-2
  682. libelf-0.177-1 libgcrypt-1.8.5-1 libgpg-error-1.36-2
  683. libldap-2.4.48-1 libnftnl-1.1.4-1 libnghttp2-1.39.2-1
  684. libnl-3.5.0-1 libpcap-1.9.1-1 libsecret-0.19.1-1
  685. libssh2-1.9.0-1 libtasn1-4.14-2 libusb-1.0.23-1
  686. libxml2-2.9.9-3 linux-aarch64-5.3.5-1 linux-api-headers-5.3.1-1
  687. linux-firmware-20190923.417a9c6-1 logrotate-3.15.1-1
  688. lvm2-2.02.186-2 lz4-1:1.9.2-1 man-db-2.8.7-1 man-pages-5.02-1
  689. mkinitcpio-26-1 nano-4.5-1 openresolv-3.9.2-1
  690. openssh-8.0p1-3.1 openssl-1.1.1.d-1 p11-kit-0.23.18.1-1
  691. pacman-mirrorlist-20190921-1 perl-5.30.0-3.1 s-nail-14.9.15-1
  692. sed-4.7-2 shadow-4.7-2 sqlite-3.30.0-1 systemd-243.51-1
  693. systemd-libs-243.51-1 systemd-sysvcompat-243.51-1 tar-1.32-2
  694. tzdata-2019c-2 usbutils-012-1 which-2.21-4 xfsprogs-5.2.1-1
  695. zstd-1.4.3-1
  696.  
  697. Total Download Size: 213.09 MiB
  698. Total Installed Size: 861.89 MiB
  699. Net Upgrade Size: 14.00 MiB
  700.  
  701. :: Proceed with installation? [Y/n] n
  702. [root@alarm ~]# [ 911.924122][ T44] audit: type=1130 audit(1570608903.220:29): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  703. [ 911.938484][ T44] audit: type=1131 audit(1570608903.220:30): pid=1 uid=0 auid=4294967295 ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
  704.  
  705. [root@alarm ~]#
  706. [root@alarm ~]# pacman -S cpupower
  707. resolving dependencies...
  708. looking for conflicting packages...
  709.  
  710. Packages (1) cpupower-5.3-1
  711.  
  712. Total Download Size: 0.11 MiB
  713. Total Installed Size: 0.50 MiB
  714.  
  715. :: Proceed with installation? [Y/n]
  716. :: Retrieving packages...
  717. cpupower-5.3-1-aarch64 116.4 KiB 262K/s 00:00 [######################] 100%
  718. (1/1) checking keys in keyring [######################] 100%
  719. (1/1) checking package integrity [######################] 100%
  720. (1/1) loading package files [######################] 100%
  721. (1/1) checking for file conflicts [######################] 100%
  722. (1/1) checking available disk space [######################] 100%
  723. :: Processing package changes...
  724. (1/1) installing cpupower [######################] 100%
  725. :: Running post-transaction hooks...
  726. (1/2) Reloading system manager configuration...
  727. (2/2) Arming ConditionNeedsUpdate...
  728. [root@alarm ~]#
  729. [root@alarm ~]#
  730. [root@alarm ~]# cpupower
  731. Usage: cpupower [-d|--debug] [-c|--cpu cpulist ] <command> [<args>]
  732. Supported commands are:
  733. frequency-info
  734. frequency-set
  735. idle-info
  736. idle-set
  737. set
  738. info
  739. monitor
  740. help
  741.  
  742. Not all commands can make use of the -c cpulist option.
  743.  
  744. Use 'cpupower help <command>' for getting help for above commands.
  745. [root@alarm ~]# cpupower frequency-info
  746. analyzing CPU 0:
  747. driver: cpufreq-dt
  748. CPUs which run at the same hardware frequency: 0 1
  749. CPUs which need to have their frequency coordinated by software: 0 1
  750. maximum transition latency: 50.0 us
  751. hardware limits: 100.0 MHz - 1.90 GHz
  752. available frequency steps: 100.0 MHz, 250 MHz, 500 MHz, 667 MHz, 1000 MHz, 1.20 GHz, 1.40 GHz, 1.51 GHz, 1.61 GHz, 1.70 GHz, 1.90 GHz
  753. available cpufreq governors: ondemand userspace performance schedutil
  754. current policy: frequency should be within 100.0 MHz and 1.90 GHz.
  755. The governor "performance" may decide which speed to use
  756. within this range.
  757. current CPU frequency: 1.90 GHz (asserted by call to hardware)
  758. [root@alarm ~]#
RAW Paste Data

Adblocker detected! Please consider disabling it...

We've detected AdBlock Plus or some other adblocking software preventing Pastebin.com from fully loading.

We don't have any obnoxious sound, or popup ads, we actively block these annoying types of ads!

Please add Pastebin.com to your ad blocker whitelist or disable your adblocking software.

×