API tools faq
paste
rdha1

smart

rdha1
Mar 31st, 2024 (edited)
119
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 10.93 KB | None | 0 0
raw download clone embed print report
  1. [duga1@Archlin ~]$ smartctl -a /dev/sdb
  2. smartctl 7.4 2023-08-01 r5530 [x86_64-linux-6.6.23-1-lts] (local build)
  3. Copyright (C) 2002-23, Bruce Allen, Christian Franke, www.smartmontools.org
  4.  
  5. === START OF INFORMATION SECTION ===
  6. Device Model: TOSHIBA MQ02ABF050H
  7. Serial Number: 95AWC4IIT
  8. LU WWN Device Id: 5 000039 684283eee
  9. Firmware Version: HDF01D
  10. User Capacity: 500.107.862.016 bytes [500 GB]
  11. Sector Sizes: 512 bytes logical, 4096 bytes physical
  12. Rotation Rate: 5400 rpm
  13. Form Factor: 2.5 inches
  14. TRIM Command: Available, deterministic
  15. Device is: Not in smartctl database 7.3/5528
  16. ATA Version is: ATA8-ACS (minor revision not indicated)
  17. SATA Version is: SATA 3.0, 6.0 Gb/s (current: 6.0 Gb/s)
  18. Local Time is: Mon Apr 1 05:47:59 2024 EEST
  19. SMART support is: Available - device has SMART capability.
  20. SMART support is: Enabled
  21.  
  22. === START OF READ SMART DATA SECTION ===
  23. SMART Status not supported: Incomplete response, ATA output registers missing
  24. SMART overall-health self-assessment test result: PASSED
  25. Warning: This result is based on an Attribute check.
  26.  
  27. General SMART Values:
  28. Offline data collection status: (0x00) Offline data collection activity
  29. was never started.
  30. Auto Offline Data Collection: Disabled.
  31. Self-test execution status: ( 0) The previous self-test routine completed
  32. without error or no self-test has ever
  33. been run.
  34. Total time to complete Offline
  35. data collection: ( 120) seconds.
  36. Offline data collection
  37. capabilities: (0x5b) SMART execute Offline immediate.
  38. Auto Offline data collection on/off support.
  39. Suspend Offline collection upon new
  40. command.
  41. Offline surface scan supported.
  42. Self-test supported.
  43. No Conveyance Self-test supported.
  44. Selective Self-test supported.
  45. SMART capabilities: (0x0003) Saves SMART data before entering
  46. power-saving mode.
  47. Supports SMART auto save timer.
  48. Error logging capability: (0x01) Error logging supported.
  49. General Purpose Logging supported.
  50. Short self-test routine
  51. recommended polling time: ( 2) minutes.
  52. Extended self-test routine
  53. recommended polling time: ( 105) minutes.
  54. SCT capabilities: (0x003d) SCT Status supported.
  55. SCT Error Recovery Control supported.
  56. SCT Feature Control supported.
  57. SCT Data Table supported.
  58.  
  59. SMART Attributes Data Structure revision number: 128
  60. Vendor Specific SMART Attributes with Thresholds:
  61. ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE
  62. 1 Raw_Read_Error_Rate 0x000b 100 100 050 Pre-fail Always - 0
  63. 3 Spin_Up_Time 0x0027 100 100 001 Pre-fail Always - 2231
  64. 5 Reallocated_Sector_Ct 0x0033 100 100 050 Pre-fail Always - 0
  65. 9 Power_On_Hours 0x0032 061 061 000 Old_age Always - 15993
  66. 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 2584
  67. 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 59
  68. 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 146
  69. 193 Load_Cycle_Count 0x0032 029 029 000 Old_age Always - 719001
  70. 194 Temperature_Celsius 0x0022 100 100 000 Old_age Always - 27 (Min/Max 11/52)
  71. 199 UDMA_CRC_Error_Count 0x0032 200 253 000 Old_age Always - 0
  72. 240 Head_Flying_Hours 0x0032 072 072 000 Old_age Always - 11465
  73. 241 Total_LBAs_Written 0x0032 100 100 000 Old_age Always - 86838202398
  74. 242 Total_LBAs_Read 0x0032 100 100 000 Old_age Always - 88880618521
  75. 254 Free_Fall_Sensor 0x0032 100 100 000 Old_age Always - 1
  76.  
  77. SMART Error Log Version: 1
  78. ATA Error Count: 15 (device log contains only the most recent five errors)
  79. CR = Command Register [HEX]
  80. FR = Features Register [HEX]
  81. SC = Sector Count Register [HEX]
  82. SN = Sector Number Register [HEX]
  83. CL = Cylinder Low Register [HEX]
  84. CH = Cylinder High Register [HEX]
  85. DH = Device/Head Register [HEX]
  86. DC = Device Command Register [HEX]
  87. ER = Error register [HEX]
  88. ST = Status register [HEX]
  89. Powered_Up_Time is measured from power on, and printed as
  90. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  91. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  92.  
  93. Error 15 occurred at disk power-on lifetime: 14290 hours (595 days + 10 hours)
  94. When the command that caused the error occurred, the device was active or idle.
  95.  
  96. After command completion occurred, registers were:
  97. ER ST SC SN CL CH DH
  98. -- -- -- -- -- -- --
  99. 40 41 a0 08 8a 7c 40 Error: WP at LBA = 0x007c8a08 = 8161800
  100.  
  101. Commands leading to the command that caused the error were:
  102. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  103. -- -- -- -- -- -- -- -- ---------------- --------------------
  104. 61 40 50 20 c3 a7 40 00 00:47:41.797 WRITE FPDMA QUEUED
  105. 60 00 28 00 00 51 40 00 00:47:41.232 READ FPDMA QUEUED
  106. 60 30 20 20 1f b1 40 00 00:47:41.210 READ FPDMA QUEUED
  107. 60 00 18 20 1b b1 40 00 00:47:41.203 READ FPDMA QUEUED
  108. 60 00 10 20 13 b1 40 00 00:47:41.193 READ FPDMA QUEUED
  109.  
  110. Error 14 occurred at disk power-on lifetime: 14290 hours (595 days + 10 hours)
  111. When the command that caused the error occurred, the device was active or idle.
  112.  
  113. After command completion occurred, registers were:
  114. ER ST SC SN CL CH DH
  115. -- -- -- -- -- -- --
  116. 40 41 d0 08 8a 7c 40 Error: WP at LBA = 0x007c8a08 = 8161800
  117.  
  118. Commands leading to the command that caused the error were:
  119. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  120. -- -- -- -- -- -- -- -- ---------------- --------------------
  121. 61 38 38 30 86 78 40 00 00:33:42.471 WRITE FPDMA QUEUED
  122. 61 10 30 10 86 78 40 00 00:33:42.471 WRITE FPDMA QUEUED
  123. 61 08 28 f8 85 78 40 00 00:33:42.471 WRITE FPDMA QUEUED
  124. 61 18 20 d0 85 78 40 00 00:33:42.471 WRITE FPDMA QUEUED
  125. 61 08 f0 b8 85 78 40 00 00:33:42.471 WRITE FPDMA QUEUED
  126.  
  127. Error 13 occurred at disk power-on lifetime: 14290 hours (595 days + 10 hours)
  128. When the command that caused the error occurred, the device was active or idle.
  129.  
  130. After command completion occurred, registers were:
  131. ER ST SC SN CL CH DH
  132. -- -- -- -- -- -- --
  133. 40 41 f0 08 8a 7c 40 Error: UNC at LBA = 0x007c8a08 = 8161800
  134.  
  135. Commands leading to the command that caused the error were:
  136. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  137. -- -- -- -- -- -- -- -- ---------------- --------------------
  138. 60 08 f0 08 8a 7c 40 00 00:32:46.492 READ FPDMA QUEUED
  139. 60 08 e8 50 d0 7c 40 00 00:32:46.491 READ FPDMA QUEUED
  140. 60 08 e0 48 cc 7c 40 00 00:32:46.491 READ FPDMA QUEUED
  141. 60 08 d8 68 83 7c 40 00 00:32:46.491 READ FPDMA QUEUED
  142. 60 08 d0 88 7b 7c 40 00 00:32:46.491 READ FPDMA QUEUED
  143.  
  144. Error 12 occurred at disk power-on lifetime: 14289 hours (595 days + 9 hours)
  145. When the command that caused the error occurred, the device was active or idle.
  146.  
  147. After command completion occurred, registers were:
  148. ER ST SC SN CL CH DH
  149. -- -- -- -- -- -- --
  150. 40 41 40 08 8a 7c 40 Error: UNC at LBA = 0x007c8a08 = 8161800
  151.  
  152. Commands leading to the command that caused the error were:
  153. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  154. -- -- -- -- -- -- -- -- ---------------- --------------------
  155. 60 08 b8 38 c0 67 40 00 00:14:28.697 READ FPDMA QUEUED
  156. 60 08 b0 20 c0 27 40 00 00:14:28.697 READ FPDMA QUEUED
  157. 60 08 a8 00 c0 27 40 00 00:14:28.697 READ FPDMA QUEUED
  158. 60 08 a0 00 c0 e7 40 00 00:14:28.697 READ FPDMA QUEUED
  159. 60 08 98 00 c0 a7 40 00 00:14:28.697 READ FPDMA QUEUED
  160.  
  161. Error 11 occurred at disk power-on lifetime: 14289 hours (595 days + 9 hours)
  162. When the command that caused the error occurred, the device was active or idle.
  163.  
  164. After command completion occurred, registers were:
  165. ER ST SC SN CL CH DH
  166. -- -- -- -- -- -- --
  167. 40 41 d8 08 8a 7c 40 Error: WP at LBA = 0x007c8a08 = 8161800
  168.  
  169. Commands leading to the command that caused the error were:
  170. CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
  171. -- -- -- -- -- -- -- -- ---------------- --------------------
  172. 61 08 38 60 48 40 40 00 00:12:07.689 WRITE FPDMA QUEUED
  173. 61 10 30 38 48 40 40 00 00:12:07.689 WRITE FPDMA QUEUED
  174. 61 08 28 28 48 40 40 00 00:12:07.689 WRITE FPDMA QUEUED
  175. 61 08 18 10 48 40 40 00 00:12:07.689 WRITE FPDMA QUEUED
  176. 60 78 10 50 7e 69 40 00 00:12:07.607 READ FPDMA QUEUED
  177.  
  178. SMART Self-test log structure revision number 1
  179. Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
  180. # 1 Extended offline Completed without error 00% 14296 -
  181. # 2 Short offline Aborted by host 90% 13883 -
  182. # 3 Short offline Aborted by host 90% 10460 -
  183. # 4 Extended offline Completed without error 00% 10451 -
  184. # 5 Short offline Completed without error 00% 10446 -
  185. # 6 Short offline Aborted by host 90% 10443 -
  186. # 7 Extended offline Aborted by host 80% 8179 -
  187. # 8 Extended offline Aborted by host 90% 8172 -
  188. # 9 Extended offline Aborted by host 90% 8172 -
  189. #10 Extended offline Aborted by host 90% 8171 -
  190. #11 Short offline Completed without error 00% 8171 -
  191. #12 Short offline Completed without error 00% 7360 -
  192. #13 Short offline Completed without error 00% 6992 -
  193. #14 Short offline Completed without error 00% 6569 -
  194. #15 Short offline Completed without error 00% 6394 -
  195. #16 Short offline Completed without error 00% 6104 -
  196. #17 Short offline Completed without error 00% 5936 -
  197. #18 Short offline Completed without error 00% 5796 -
  198. #19 Short offline Completed without error 00% 5642 -
  199. #20 Short offline Completed without error 00% 5452 -
  200. #21 Short offline Completed without error 00% 5422 -
  201.  
  202. SMART Selective self-test log data structure revision number 1
  203. SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
  204. 1 0 0 Not_testing
  205. 2 0 0 Not_testing
  206. 3 0 0 Not_testing
  207. 4 0 0 Not_testing
  208. 5 0 0 Not_testing
  209. Selective self-test flags (0x0):
  210. After scanning selected spans, do NOT read-scan remainder of disk.
  211. If Selective self-test is pending on power-up, resume after 0 minute delay.
  212.  
  213. The above only provides legacy SMART information - try 'smartctl -x' for more
  214.  
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!