Good example: Debug Output Marlin Offset Problem

Changing monitoring state from "Operational" to "Starting"
Send: N0 M110 N0*125
Recv: ok
Changing monitoring state from "Starting" to "Printing"
Send: N1 M201 X2000 Y2000 Z100 E5000*11
Recv: ok
Send: N2 M203 X500 Y500 Z20 E60*58
Recv: ok
Send: N3 M204 P1500 R1000 T2000*87
Recv: ok
Send: N4 M205 X8.00 Y8.00 Z0.40 E5.00*63
Recv: ok
Send: N5 M205 S0 T0*38
Recv: ok
Send: N6 M107*35
Recv: ok
Send: N7 M80*28
Recv: ok
Send: N8 G90*24
Recv: ok
Send: N9 M83*17
Recv: ok
Send: N10 M140 S60*98
Recv: ok
Send: N11 G28*35
Recv: >>> G28  X5.00 Y182.40 Z20.00
Recv: Machine Type: Cartesian
Recv: Probe: FIX_MOUNTED_PROBE
Recv: Probe Offset X-22.00 Y-9.00 Z-1.55 (Left-Front & Below Nozzle)
Recv: Auto Bed Leveling: BILINEAR (enabled)
Recv: Z Fade: 10.00
Recv: ABL Adjustment Z+0.055 ( 0.000)
Recv: >>> set_bed_leveling_enabled  X5.00 Y182.40 Z20.00
Recv:   current_position= X5.00 Y182.40 Z20.00 : Leveling ON
Recv:   current_position= X5.00 Y182.40 Z20.00 : sync_plan_position
Recv:   current_position= X5.00 Y182.40 Z20.00 : Leveling OFF
Recv: <<< set_bed_leveling_enabled  X5.00 Y182.40 Z20.00
Recv: remember_feedrate_scaling_off: fr=10.00 100%
Recv: Raise Z before homing:
Recv: do_z_clearance(2.00 [20.00 to 3.55], 0)
Recv:   current_position= X0.00 Y0.00 Z20.00 : sync_plan_position
Recv: do_blocking_move_to_xy(-352.50, -352.50, 212.13)
Recv: >>> do_blocking_move_to  X0.00 Y0.00 Z20.00
Recv: >  X-352.50 Y-352.50 Z20.00
Recv: <<< do_blocking_move_to  X-352.50 Y-352.50 Z20.00
Recv: >>> homeaxis(X)
Recv: Home Fast: -352.50mm
Recv: >>> do_homing_move  X0.00 Y0.00 Z20.00
Recv: ...(X, -352.50, [150.00])
Recv: <<< do_homing_move  X0.00 Y0.00 Z20.00
Recv: Move Away: 5.00mm
Recv: >>> do_homing_move  X0.00 Y0.00 Z20.00
Recv: ...(X, 5.00, [150.00])
Recv: <<< do_homing_move  X0.00 Y0.00 Z20.00
Recv: Re-bump: -10.00mm
Recv: >>> do_homing_move  X0.00 Y0.00 Z20.00
Recv: ...(X, -10.00, 15.00)
Recv: <<< do_homing_move  X0.00 Y0.00 Z20.00
Recv: >>> set_axis_is_at_home(X)
Recv: > home_offset[X] = 0.00
Recv:   current_position= X0.00 Y0.00 Z20.00 :
Recv: <<< set_axis_is_at_home(X)
Recv:   current_position= X0.00 Y0.00 Z20.00 : sync_plan_position
Recv:   current_position= X0.00 Y0.00 Z20.00 : > AFTER set_axis_is_at_home
Recv: <<< homeaxis(X)
Recv: >>> homeaxis(Y)
Recv: Home Fast: -352.50mm
Recv: >>> do_homing_move  X0.00 Y0.00 Z20.00
Recv: ...(Y, -352.50, [150.00])
Recv:  T:22.96 /0.00 B:59.97 /60.00 @:0 B@:42
Recv: echo:busy: processing
Recv: <<< do_homing_move  X0.00 Y0.00 Z20.00
Recv: Move Away: 5.00mm
Recv: >>> do_homing_move  X0.00 Y0.00 Z20.00
Recv: ...(Y, 5.00, [150.00])
Recv: <<< do_homing_move  X0.00 Y0.00 Z20.00
Recv: Re-bump: -10.00mm
Recv: >>> do_homing_move  X0.00 Y0.00 Z20.00
Recv: ...(Y, -10.00, 15.00)
Recv: <<< do_homing_move  X0.00 Y0.00 Z20.00
Recv: >>> set_axis_is_at_home(Y)
Recv: > home_offset[Y] = 0.00
Recv:   current_position= X0.00 Y0.00 Z20.00 :
Recv: <<< set_axis_is_at_home(Y)
Recv:   current_position= X0.00 Y0.00 Z20.00 : sync_plan_position
Recv:   current_position= X0.00 Y0.00 Z20.00 : > AFTER set_axis_is_at_home
Recv: <<< homeaxis(Y)
Recv: >>> home_z_safely  X0.00 Y0.00 Z20.00
Recv:   current_position= X0.00 Y0.00 Z20.00 : sync_plan_position
Recv:   destination= X139.00 Y126.00 Z20.00 : home_z_safely
Recv: do_blocking_move_to_xy(139.00, 126.00, 0.00)
Recv: >>> do_blocking_move_to  X0.00 Y0.00 Z20.00
Recv: >  X139.00 Y126.00 Z20.00
Recv:  T:22.85 /0.00 B:60.03 /60.00 @:0 B@:32
Recv: echo:busy: processing
Recv: <<< do_blocking_move_to  X139.00 Y126.00 Z20.00
Recv: >>> homeaxis(Z)
Recv:   current_position= X139.00 Y126.00 Z20.00 : Probe::set_deployed
Recv: deploy=1 no_return=0
Recv: Raise Z to 3.00
Recv: do_z_clearance(3.00 [20.00 to 4.55], 0)
Recv: >>> Probe::probe_specific_action  X139.00 Y126.00 Z20.00
Recv: <<< Probe::probe_specific_action  X139.00 Y126.00 Z20.00
Recv: >>> do_blocking_move_to  X139.00 Y126.00 Z20.00
Recv: >  X139.00 Y126.00 Z20.00
Recv: <<< do_blocking_move_to  X139.00 Y126.00 Z20.00
Recv: Home Fast: -375.00mm
Recv: >>> do_homing_move  X139.00 Y126.00 Z20.00
Recv: ...(Z, -375.00, [4.00])
Recv:  T:22.91 /0.00 B:60.03 /60.00 @:0 B@:33
Recv: echo:busy: processing
Recv:  T:22.96 /0.00 B:60.04 /60.00 @:0 B@:32
Recv: echo:busy: processing
Recv: <<< do_homing_move  X139.00 Y126.00 Z20.00
Recv: Move Away: 2.00mm
Recv: >>> do_homing_move  X139.00 Y126.00 Z20.00
Recv: ...(Z, 2.00, 10.00)
Recv:  T:22.92 /0.00 B:60.05 /60.00 @:0 B@:31
Recv: echo:busy: processing
Recv: <<< do_homing_move  X139.00 Y126.00 Z20.00
Recv: Re-bump: -4.00mm
Recv: >>> do_homing_move  X139.00 Y126.00 Z20.00
Recv: ...(Z, -4.00, 5.00)
Recv: <<< do_homing_move  X139.00 Y126.00 Z20.00
Recv: >>> set_axis_is_at_home(Z)
Recv: *** Z homed with PROBE (Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN) ***
Recv: > (M851 Z-1.55)
Recv: > home_offset[Z] = 0.00
Recv:   current_position= X139.00 Y126.00 Z1.55 :
Recv: <<< set_axis_is_at_home(Z)
Recv:   current_position= X139.00 Y126.00 Z1.55 : sync_plan_position
Recv:   current_position= X139.00 Y126.00 Z1.55 : > AFTER set_axis_is_at_home
Recv:   current_position= X139.00 Y126.00 Z1.55 : Probe::set_deployed
Recv: deploy=0 no_return=0
Recv: >>> Probe::probe_specific_action  X139.00 Y126.00 Z1.55
Recv: <<< Probe::probe_specific_action  X139.00 Y126.00 Z1.55
Recv: >>> do_blocking_move_to  X139.00 Y126.00 Z1.55
Recv: >  X139.00 Y126.00 Z1.55
Recv: <<< do_blocking_move_to  X139.00 Y126.00 Z1.55
Recv: <<< homeaxis(Z)
Recv: <<< home_z_safely  X139.00 Y126.00 Z1.55
Recv:   current_position= X139.00 Y126.00 Z1.55 : sync_plan_position
Recv: >>> do_move_after_z_homing  X139.00 Y126.00 Z1.55
Recv: <<< do_move_after_z_homing  X139.00 Y126.00 Z1.55
Recv: >>> set_bed_leveling_enabled  X139.00 Y126.00 Z1.55
Recv:   current_position= X139.00 Y126.00 Z1.55 : Leveling OFF
Recv:   current_position= X139.00 Y126.00 Z1.50 : sync_plan_position
Recv:   current_position= X139.00 Y126.00 Z1.50 : Leveling ON
Recv: <<< set_bed_leveling_enabled  X139.00 Y126.00 Z1.50
Recv: restore_feedrate_and_scaling: fr=10.00 100%
Recv: X:139.00 Y:126.00 Z:1.50 E:0.00 Count X:11120 Y:10080 Z:620
Recv: <<< G28  X139.00 Y126.00 Z1.50
Recv: ok
Send: N12 M501*20
Recv: >>> set_bed_leveling_enabled  X139.00 Y126.00 Z1.50
Recv:   current_position= X139.00 Y126.00 Z1.50 : Leveling ON
Recv:   current_position= X139.00 Y126.00 Z1.63 : sync_plan_position
Recv:   current_position= X139.00 Y126.00 Z1.63 : Leveling OFF
Recv: <<< set_bed_leveling_enabled  X139.00 Y126.00 Z1.63
Recv: echo:V88 stored settings retrieved (732 bytes; crc 62330)
Recv: //action:notification Stored settings retrieved
Recv: Axis X min:0.00 max:235.00
Recv: Axis Y min:0.00 max:235.00
Recv: Axis Z min:0.00 max:250.00
Recv: echo:; Linear Units:
Recv: echo:  G21 ; (mm)
Recv: echo:; Temperature Units:
Recv: echo:  M149 C ; Units in Celsius
Recv: echo:; Filament settings (Disabled):
Recv: echo:  M200 S0 D1.75
Recv: echo:; Steps per unit:
Recv: echo:  M92 X80.00 Y80.00 Z400.00 E98.80
Recv: echo:; Max feedrates (units/s):
Recv: echo:  M203 X500.00 Y500.00 Z20.00 E25.00
Recv: echo:; Max Acceleration (units/s2):
Recv: echo:  M201 X2000.00 Y2000.00 Z100.00 E5000.00
Recv: echo:; Acceleration (units/s2) (P<print-accel> R<retract-accel> T<travel-accel>):
Recv: echo:  M204 P500.00 R500.00 T500.00
Recv: echo:; Advanced (B<min_segment_time_us> S<min_feedrate> T<min_travel_feedrate> J<junc_dev>):
Recv: echo:  M205 B20000.00 S0.00 T0.00 J0.30
Recv: echo:; Home offset:
Recv: echo:  M206 X0.00 Y0.00 Z0.00
Recv: echo:; Auto Bed Leveling:
Recv: echo:  M420 S0 Z10.00 ; Leveling OFF
Recv: echo:  G29 W I0 J0 Z0.14750
Recv: echo:  G29 W I1 J0 Z0.11500
Recv: echo:  G29 W I2 J0 Z0.07250
Recv: echo:  G29 W I3 J0 Z0.07750
Recv: echo:  G29 W I4 J0 Z0.15000
Recv: echo:  G29 W I0 J1 Z0.13250
Recv: echo:  G29 W I1 J1 Z0.08500
Recv: echo:  G29 W I2 J1 Z0.05250
Recv: echo:  G29 W I3 J1 Z0.07000
Recv: echo:  G29 W I4 J1 Z0.16250
Recv: echo:  G29 W I0 J2 Z0.18000
Recv: echo:  G29 W I1 J2 Z0.10500
Recv: echo:  G29 W I2 J2 Z0.06500
Recv: echo:  G29 W I3 J2 Z0.06250
Recv: echo:  G29 W I4 J2 Z0.17250
Recv: echo:  G29 W I0 J3 Z0.05000
Recv: echo:  G29 W I1 J3 Z0.05250
Recv: echo:  G29 W I2 J3 Z0.04750
Recv: echo:  G29 W I3 J3 Z0.06000
Recv: echo:  G29 W I4 J3 Z0.15000
Recv: echo:  G29 W I0 J4 Z0.07500
Recv: echo:  G29 W I1 J4 Z0.08500
Recv: echo:  G29 W I2 J4 Z0.07750
Recv: echo:  G29 W I3 J4 Z0.07000
Recv: echo:  G29 W I4 J4 Z0.16000
Recv: echo:; Material heatup parameters:
Recv: echo:  M145 S0 H220.00 B45.00 F0
Recv: echo:  M145 S1 H240.00 B60.00 F0
Recv: echo:; Hotend PID:
Recv: echo:  M301 P34.68 I4.13 D72.83
Recv: echo:; Bed PID:
Recv: echo:  M304 P163.44 I30.49 D584.03
Recv: echo:; Z-Probe Offset:
Recv: echo:  M851 X-22.00 Y-9.00 Z-1.55 ; (mm)
Recv: echo:; Input Shaping:
Recv: echo:  M593 X F40.00 D0.15
Recv: echo:  M593 Y F40.00 D0.15
Recv: echo:; Linear Advance:
Recv: echo:  M900 K0.22
Recv: echo:; Filament load/unload:
Recv: echo:  M603 L0.00 U100.00 ; (mm)
Recv: ok
Send: N13 M420 S1*85
Recv: >>> set_bed_leveling_enabled  X139.00 Y126.00 Z1.63
Recv:   current_position= X139.00 Y126.00 Z1.63 : Leveling OFF
Recv:   current_position= X139.00 Y126.00 Z1.58 : sync_plan_position
Recv:   current_position= X139.00 Y126.00 Z1.58 : Leveling ON
Recv: <<< set_bed_leveling_enabled  X139.00 Y126.00 Z1.58
Recv: echo:Bed Leveling ON
Recv: echo:Fade Height 10.00
Recv: X:139.00 Y:126.00 Z:1.58 E:0.00 Count X:11120 Y:10080 Z:653
Recv: ok
Send: N14 G1 Z5 F600*2
Recv: ok
Send: N15 G1 X2 Y10 F9000*65
Recv:  T:22.88 /0.00 B:60.02 /60.00 @:0 B@:35
Recv: ok
Send: N16 G1 Z0.28 F240*33
Recv: ok
Send: N17 G92 E0*113
Recv: X:2.00 Y:10.00 Z:0.28 E:0.00 Count X:3897 Y:3964 Z:2021
Recv: ok
Send: N18 G1 Y140 F1000*58
Recv:  T:22.97 /0.00 B:60.00 /60.00 @:0 B@:37
Recv: echo:busy: processing
Recv:  T:22.93 /0.00 B:59.99 /60.00 @:0 B@:38
Recv: echo:busy: processing
Recv:  T:22.93 /0.00 B:59.98 /60.00 @:0 B@:39
Recv: ok
Send: N19 G1 X2.3 F9000*40
Recv: ok
Send: N20 G92 E0*117
Recv: X:2.30 Y:140.00 Z:0.28 E:0.00 Count X:160 Y:5600 Z:166
Recv: ok
Send: N21 G92 E0*116
Recv: X:2.30 Y:140.00 Z:0.28 E:0.00 Count X:160 Y:5613 Z:166
Recv: ok
Send: N22 G21*42
Recv: ok
Send: N23 G90*33
Recv: ok
Send: N24 M83*46
Recv: ok
Send: N25 M107*18
Recv: ok
Send: N26 G1 Z.3 F9000*20
Recv: ok
Send: N27 M107*16
Recv: ok
Send: N28 G1 Z2.2 F600*22
Recv: ok
Send: N29 G1 X5 Y182.4 F9000*105
Recv:  T:22.98 /0.00 B:59.96 /60.00 @:0 B@:41
Recv: echo:busy: processing
Recv: ok
Send: N30 G1 Z20 F600*51
Recv: ok
Send: N31 M107*23
Recv: ok
Changing monitoring state from "Printing" to "Finishing"
Send: N32 M400*22
Recv:  T:23.01 /0.00 B:59.96 /60.00 @:0 B@:41
Recv: echo:busy: processing
Recv:  T:22.97 /0.00 B:59.98 /60.00 @:0 B@:38
Recv: ok
Changing monitoring state from "Finishing" to "Operational"
Recv:  T:22.93 /0.00 B:59.99 /60.00 @:0 B@:38