uart_log_from_start_3

[sudo] Passwort für frank:


Willkommen zu minicom 2.7.1

Optionen: I18n
Übersetzt am Dec 23 2019, 02:06:26.
Port /dev/ttyUSB0, 08:30:56

Drücken Sie CTRL-A  Z für Hilfe zu speziellen Tasten
DDR Version V1.11 20211103
ln
ddrconfig:7
LPDDR4X, 324MHz
BW=32 Col=10 Bk=8 CS0 Row=16 CS1 Row=16 CS=2 Die BW=16 Size=4096MB
tdqss: cs0 dqs0: -24ps, dqs1: -96ps, dqs2: -48ps, dqs3: -168ps,
tdqss: cs1 dqs0: -24ps, dqs1: -72ps, dqs2: -48ps, dqs3: -168ps,

change to: 324MHz
PHY drv:clk:36,ca:36,DQ:29,odt:0
vrefinner:41%, vrefout:41%
dram drv:40,odt:0
clk skew:0x63

change to: 528MHz
PHY drv:clk:36,ca:36,DQ:29,odt:0
vrefinner:41%, vrefout:41%
dram drv:40,odt:0
clk skew:0x58

change to: 780MHz
PHY drv:clk:36,ca:36,DQ:29,odt:0
vrefinner:41%, vrefout:41%
dram drv:40,odt:0
clk skew:0x58

change to: 1560MHz(final freq)
PHY drv:clk:36,ca:36,DQ:29,odt:60
vrefinner:16%, vrefout:22%
dram drv:40,odt:80
vref_ca:00000071
clk skew:0x21
cs 0:
the read training result:
DQS0:0x39, DQS1:0x37, DQS2:0x3a, DQS3:0x33,
min  :0x12 0x14 0x17 0x12  0x3  0x6  0xa  0x3 , 0xc  0xd  0x3  0x1  0xe  0xf  0,
      0x16 0x16 0x10  0xd  0x9  0x1  0x3  0x4 ,0x10  0xd  0x8  0x1 0x13 0x12  0,
mid  :0x2f 0x30 0x33 0x2f 0x1f 0x24 0x27 0x20 ,0x27 0x27 0x1f 0x1d 0x29 0x28 0x,
      0x2e 0x2f 0x29 0x26 0x20 0x1b 0x1c 0x1e ,0x2b 0x26 0x23 0x1d 0x2c 0x2c 0x,
max  :0x4c 0x4c 0x50 0x4c 0x3c 0x42 0x44 0x3d ,0x43 0x42 0x3c 0x39 0x45 0x42 0x,
      0x47 0x48 0x43 0x40 0x37 0x36 0x36 0x39 ,0x47 0x40 0x3f 0x39 0x45 0x47 0x,
range:0x3a 0x38 0x39 0x3a 0x39 0x3c 0x3a 0x3a ,0x37 0x35 0x39 0x38 0x37 0x33 0x,
      0x31 0x32 0x33 0x33 0x2e 0x35 0x33 0x35 ,0x37 0x33 0x37 0x38 0x32 0x35 0x,
the write training result:
DQS0:0x1d, DQS1:0xe, DQS2:0x18, DQS3:0x0,
min  :0x6a 0x6e 0x70 0x6a 0x5b 0x5d 0x63 0x62 0x61 ,0x52 0x54 0x4e 0x4d 0x57 0x,
      0x6a 0x6b 0x61 0x61 0x59 0x57 0x58 0x5f 0x5e ,0x51 0x50 0x4d 0x49 0x55 0x,
mid  :0x86 0x89 0x8b 0x84 0x73 0x77 0x7c 0x7b 0x77 ,0x6d 0x6f 0x67 0x67 0x6f 0x,
      0x85 0x85 0x7b 0x7b 0x73 0x71 0x70 0x76 0x76 ,0x6c 0x6b 0x68 0x62 0x6e 0x,
max  :0xa2 0xa4 0xa7 0x9f 0x8c 0x92 0x96 0x94 0x8e ,0x89 0x8b 0x81 0x81 0x87 0x,
      0xa1 0x9f 0x95 0x95 0x8e 0x8b 0x89 0x8e 0x8e ,0x88 0x86 0x84 0x7b 0x87 0x,
range:0x38 0x36 0x37 0x35 0x31 0x35 0x33 0x32 0x2d ,0x37 0x37 0x33 0x34 0x30 0x,
      0x37 0x34 0x34 0x34 0x35 0x34 0x31 0x2f 0x30 ,0x37 0x36 0x37 0x32 0x32 0x,
cs 1:
the read training result:
DQS0:0x35, DQS1:0x34, DQS2:0x38, DQS3:0x32,
min  :0x12 0x11 0x14 0x11  0x1  0x5  0xa  0x2 , 0xa  0xc  0x3  0x1  0xd  0xc  0,
      0x13 0x13  0xd  0xd  0x8  0x0  0x3  0x3 , 0xd  0xc  0x8  0x1 0x13 0x12  0,
mid  :0x2d 0x2d 0x30 0x2c 0x1d 0x21 0x26 0x1e ,0x24 0x25 0x1e 0x1c 0x28 0x26 0x,
      0x2d 0x2c 0x27 0x26 0x1f 0x1b 0x1c 0x1e ,0x29 0x25 0x24 0x1d 0x2d 0x2c 0x,
max  :0x49 0x49 0x4d 0x47 0x3a 0x3e 0x42 0x3a ,0x3f 0x3f 0x39 0x38 0x43 0x40 0x,
      0x47 0x46 0x42 0x3f 0x36 0x37 0x35 0x39 ,0x45 0x3f 0x40 0x3a 0x47 0x47 0x,
range:0x37 0x38 0x39 0x36 0x39 0x39 0x38 0x38 ,0x35 0x33 0x36 0x37 0x36 0x34 0x,
      0x34 0x33 0x35 0x32 0x2e 0x37 0x32 0x36 ,0x38 0x33 0x38 0x39 0x34 0x35 0x,
the write training result:
DQS0:0x1d, DQS1:0xe, DQS2:0x18, DQS3:0x0,
min  :0x74 0x77 0x7a 0x74 0x64 0x69 0x6d 0x6d 0x6a ,0x61 0x63 0x59 0x59 0x63 0x,
      0x6a 0x69 0x63 0x62 0x5a 0x57 0x57 0x5e 0x60 ,0x52 0x50 0x4f 0x4a 0x54 0x,
mid  :0x90 0x92 0x95 0x8e 0x7d 0x82 0x86 0x84 0x82 ,0x7b 0x7c 0x73 0x72 0x7d 0x,
      0x86 0x85 0x7d 0x7c 0x74 0x71 0x71 0x78 0x79 ,0x6d 0x6a 0x69 0x62 0x6d 0x,
max  :0xac 0xae 0xb0 0xa9 0x96 0x9c 0x9f 0x9b 0x9a ,0x96 0x96 0x8e 0x8c 0x98 0x,
      0xa2 0xa1 0x98 0x96 0x8f 0x8b 0x8b 0x92 0x92 ,0x89 0x85 0x84 0x7b 0x87 0x,
range:0x38 0x37 0x36 0x35 0x32 0x33 0x32 0x2e 0x30 ,0x35 0x33 0x35 0x33 0x35 0x,
      0x38 0x38 0x35 0x34 0x35 0x34 0x34 0x34 0x32 ,0x37 0x35 0x35 0x31 0x33 0x,
CA Training result:
cs:0 min  :0x4f 0x4a 0x43 0x3c 0x42 0x39 0x4b ,0x4e 0x44 0x42 0x39 0x40 0x34 0x,
cs:0 mid  :0x8a 0x8b 0x7c 0x7d 0x7c 0x7c 0x79 ,0x87 0x86 0x7b 0x7b 0x7a 0x77 0x,
cs:0 max  :0xc5 0xcc 0xb5 0xbf 0xb6 0xbf 0xa7 ,0xc1 0xc8 0xb5 0xbd 0xb4 0xbb 0x,
cs:0 range:0x76 0x82 0x72 0x83 0x74 0x86 0x5c ,0x73 0x84 0x73 0x84 0x74 0x87 0x,
cs:1 min  :0x4e 0x52 0x42 0x40 0x44 0x3c 0x49 ,0x4c 0x48 0x40 0x3e 0x40 0x3b 0x,
cs:1 mid  :0x8d 0x90 0x7d 0x7d 0x7f 0x7b 0x78 ,0x88 0x86 0x7d 0x7c 0x7c 0x77 0x,
cs:1 max  :0xcc 0xce 0xb8 0xbb 0xbb 0xbb 0xa7 ,0xc4 0xc4 0xbb 0xba 0xb8 0xb3 0x,
cs:1 range:0x7e 0x7c 0x76 0x7b 0x77 0x7f 0x5e ,0x78 0x7c 0x7b 0x7c 0x78 0x78 0x,
out
rockchip_sdram_size fdc20208 10000af1
rank=2 cs0_col=10 cs1_col=10 bk=3 cs0_row=16 cs1_row=16 bg=0 bw=2 row_3_4=0
SDRAM base=0, size=100000000

U-Boot SPL 2022.04-2 (Apr 07 2022 - 18:03:21 +0000)
saradc@fe720000: Can't update Vdd. Error: -38saradc@fe720000: Can't update Vss.!
Trying to boot from MMC1
INFO:    Preloader serial: 2
NOTICE:  BL31: v2.3():v2.3-152-g4e725b15f:cl
NOTICE:  BL31: Built : 10:51:13, Jul 15 2021
INFO:    GICv3 without legacy support detected.
INFO:    ARM GICv3 driver initialized in EL3
INFO:    pmu v1 is valid
INFO:    dfs DDR fsp_param[0].freq_mhz= 1560MHz
INFO:    dfs DDR fsp_param[1].freq_mhz= 324MHz
INFO:    dfs DDR fsp_param[2].freq_mhz= 528MHz
INFO:    dfs DDR fsp_param[3].freq_mhz= 780MHz
INFO:    Using opteed sec cpu_context!
INFO:    boot cpu mask: 0
INFO:    BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE iniK
ERROR:   Error initializing runtime service opteed_fast
INFO:    BL31: Preparing for EL3 exit to normal world
INFO:    Entry point address = 0xa00000
INFO:    SPSR = 0x3c9


U-Boot 2022.04-2 (Apr 07 2022 - 18:03:21 +0000) Manjaro Linux ARM

Model: Pine64 RK3566 Quartz64-B Board
DRAM:  rockchip_sdram_size fdc20208 10000af1
rank=2 cs0_col=10 cs1_col=10 bk=3 cs0_row=16 cs1_row=16 bg=0 bw=2 row_3_4=0
SDRAM base=0, size=100000000
3.7 GiB
PMIC:  RK8090 (on=0x10, off=0x00)
Core:  282 devices, 21 uclasses, devicetree: separate
MMC:   rockchip_sdhci_probe clk set rate fail!
mmc@fe2b0000: 1, mmc@fe2c0000: 2, mmc@fe310000: 0
Loading Environment from nowhere... OK
In:    serial@fe660000
Out:   serial@fe660000
Err:   serial@fe660000
Model: Pine64 RK3566 Quartz64-B Board
Net:   No ethernet found.
Hit any key to stop autoboot:  0
switch to partitions #0, OK
mmc1 is current device
Scanning mmc 1:1...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
1:      Manjaro ARM
Retrieving file: /initramfs-linux.img
Retrieving file: /Image
append: initrd=/initramfs-linux.img console=ttyS2,1500000 root=PARTUUID=14c62b3s
Retrieving file: /dtbs/rockchip/rk3566-quartz64-b.dtb
Moving Image from 0x2080000 to 0x2200000, end=3d60000
## Flattened Device Tree blob at 0a100000
   Booting using the fdt blob at 0xa100000
   Loading Ramdisk to ed739000, end edeec4d2 ... OK
   Loading Device Tree to 00000000ed71b000, end 00000000ed738d09 ... OK

Starting kernel ...

:: running early hook [udev]
Starting version 251-1-arch
:: running hook [udev]
:: Triggering uevents...
:: performing fsck on '/dev/mmcblk0p2'
ROOT_MNJRO: recovering journal
ROOT_MNJRO: Clearing orphaned inode 256455 (uid=1000, gid=1000, mode=0100644, s)
ROOT_MNJRO: Clearing orphaned inode 256405 (uid=1000, gid=1000, mode=0100644, s)
ROOT_MNJRO: Clearing orphaned inode 256347 (uid=1000, gid=1000, mode=0100644, s)
ROOT_MNJRO: Clearing orphaned inode 256218 (uid=1000, gid=1000, mode=0100644, s)
ROOT_MNJRO: clean, 163294/3776000 files, 1288420/15466496 blocks
:: mounting '/dev/mmcblk0p2' on real root
:: running cleanup hook [udev]

Welcome to Manjaro ARM!

[  OK  ] Created slice Slice /system/getty.
[  OK  ] Created slice Slice /system/modprobe.
[  OK  ] Created slice Slice /system/serial-getty.
[  OK  ] Created slice User and Session Slice.
[  OK  ] Started Forward Password R�…uests to Wall Directory Watch.
[  OK  ] Set up automount Arbitrary�…s File System Automount Point.
[  OK  ] Reached target Local Integrity Protected Volumes.
[  OK  ] Reached target Remote Encrypted Volumes.
[  OK  ] Reached target Remote File Systems.
[  OK  ] Reached target Slice Units.
[  OK  ] Reached target Swaps.
[  OK  ] Reached target Local Verity Protected Volumes.
[  OK  ] Listening on Device-mapper event daemon FIFOs.
[  OK  ] Listening on LVM2 poll daemon socket.
[  OK  ] Listening on Process Core Dump Socket.
[  OK  ] Listening on Journal Socket (/dev/log).
[  OK  ] Listening on Journal Socket.
[  OK  ] Listening on Network Service Netlink Socket.
[  OK  ] Listening on Userspace Out-Of-Memory (OOM) Killer Socket.
[  OK  ] Listening on udev Control Socket.
[  OK  ] Listening on udev Kernel Socket.
[  OK  ] Listening on User Database Manager Socket.
         Mounting Huge Pages File System...
         Mounting POSIX Message Queue File System...
         Mounting Kernel Debug File System...
         Mounting Temporary Directory /tmp...
         Starting Monitoring of LVM�…meventd or progress polling...
         Starting Load Kernel Module configfs...
         Starting Load Kernel Module drm...
         Starting Load Kernel Module fuse...
         Starting Journal Service...
         Starting Load Kernel Modules...
         Starting Generate network �…ts from Kernel command line...
         Starting Remount Root and Kernel File Systems...
         Starting Coldplug All udev Devices...
[  OK  ] Started Journal Service.
[  OK  ] Mounted Huge Pages File System.
[  OK  ] Mounted POSIX Message Queue File System.
[  OK  ] Mounted Kernel Debug File System.
[  OK  ] Mounted Temporary Directory /tmp.
[  OK  ] Finished Monitoring of LVM�… dmeventd or progress polling.
[  OK  ] Finished Load Kernel Module configfs.
[  OK  ] Finished Load Kernel Module drm.
[  OK  ] Finished Load Kernel Module fuse.
[FAILED] Failed to start Load Kernel Modules.
See 'systemctl status systemd-modules-load.service' for details.
[  OK  ] Finished Generate network units from Kernel command line.
[  OK  ] Finished Remount Root and Kernel File Systems.
         Mounting FUSE Control File System...
         Mounting Kernel Configuration File System...
         Starting Flush Journal to Persistent Storage...
         Starting Load/Save Random Seed...
         Starting Apply Kernel Variables...
         Starting Create Static Device Nodes in /dev...
         Starting Setup Virtual Console...
[  OK  ] Finished Coldplug All udev Devices.
[  OK  ] Mounted FUSE Control File System.
[  OK  ] Mounted Kernel Configuration File System.
[  OK  ] Finished Apply Kernel Variables.
[  OK  ] Finished Load/Save Random Seed.
[  OK  ] Finished Flush Journal to Persistent Storage.
[  OK  ] Finished Create Static Device Nodes in /dev.
[  OK  ] Reached target Preparation for Local File Systems.
[  OK  ] Reached target Local File Systems.
[  OK  ] Reached target Containers.
         Starting Tell Plymouth To Write Out Runtime Data...
         Starting Automatic Boot Loader Update...
         Starting Create Volatile Files and Directories...
         Starting Rule-based Manage�…for Device Events and Files...
[  OK  ] Finished Setup Virtual Console.
[  OK  ] Finished Tell Plymouth To Write Out Runtime Data.
[  OK  ] Finished Automatic Boot Loader Update.
[  OK  ] Finished Create Volatile Files and Directories.
         Starting Network Name Resolution...
         Starting Network Time Synchronization...
         Starting Record System Boot/Shutdown in UTMP...
[  OK  ] Started Rule-based Manager for Device Events and Files.
         Starting Show Plymouth Boot Screen...

Manjaro Linux 5.17.0-2-MANJARO-ARM-Q64 (ttyS2)

frank-pc login: