Everything wrong with jap medium tanks in WT

Japanese tanks, issues in WT
[Suggested BR after Fix]

Type 89 I-Go [1.0]
* FHA armour not modelled
* 57mm APHE missing half its penetration
* Missing HEAT shell
* Mantlet armour thickness should be 50mm
* Gun should be able to aim left to right to some extent without turret rotating.
-
Type 97 Chi-Ha [1.3]
* FHA armour not modelled
* Mantlet armour thickness should be 50mm
* 57mm missing half its penetration
* Missing HEAT
* Gun should be able to aim gun horizontally.
-
Type 97 Chi-Ha Kai [2.3]
* FHA not modelled
* Mantlet should be 50mm thick
* Gun should be able to aim gun horizontally.
* Missing shell but due to balance reasons it shouldn't get it
-
Type 1 Chi-He [3.0]
* FHA not modelled
* Gun should be able to aim horizontally
* Missing Tokku Ko APHE - 112mm @ 100m
* Mantlet thickness - 70mm
-
Type 3 Chi-Nu [3.7]
* FHA not modelled
* Mantlet thickness - 70mm
* Missing Tokku Ko APHE - 98mm @ 500m
* Missing Neutral Steering
-
Type 3 Chi-Nu II [4.3]
* FHA not modelled
* Mantlet thickness - 70mm
* Missing Neutral steering
* Reload rate 7.7 sec ---> 6.0 sec
-
Type 5 Chi-Ri II [4.7]
* Missing Neutral steering
* Autoloader system not modelled correctly
* Should have same version of Type 5 75mm as Na-To I, best APHE shell being the Type 1.
* Hull 37mm missing Type 1 APHE.
* Missing secondary spaced armour plate behind the main armour
* 3D error, Turret should be more up front on chassis
-
Type 4 Chi-To [5.0]
* Missing Neutral Steering
* Missing 15mm spaced armour plate behind its main armour
* Reload speed should be 6.0 seconds
* Missing Type 5 APHE - 184mm @ 100m
-
Type 4 Chi-To Production [5.3]
* Missing Neutral Steering
* Missing 20mm armour just around the Mantlet
* Missing 15mm secondary spaced armour behind the main armour
* Reload speed 7.7 sec ---> 6.0 seconds
* Missing Type 5 APHE - 184mm @ 100m
-
ST-A1 [6.3]
* Armour values are wrong (WAY OFF, for example the gunshield armour in game is 50mm thick but in reality was 125mm thick)
* Wrong 90mm gun, give it its 90mm JSDGF (M318A1 Sharp Nose APBC, M82 APCBC-HE, M332 APCR)
* Reload speed 9.1 sec (in game) ---> 6.0 sec (should be)
* Missing Neutral Steering
* Max Speed 45km/h ---> 55km/h
* Turret 3D model is totally wrong
* Remove M348 HEAT-FS for balance reasons
-
ST-A2 [6.3]
Same errors as ST-A1 (look above)
-
Type 61 [7.3]
* Reverse speed -8km/h (in game), should be -22km/h
* Some areas of turret front are 40mm thick instead of 70mm
* Gunshield should be 125mm thick instead of 80mm
* 570hp (in game), should have 650 horsepower
* 45km/h (in game), should be 55km/h max speed.
* 7.7 sec reload (in game) ---> 6.0 sec reload (should be)
-
STB-1 [8.0]
* Gunshield thickness 100mm (in game), should be 116mm thick plate + 100mm air + 50mm thick Mantlet.
* Reload speed is inflated
* Hull armour angles are off , the upper upper Glaces should be 75 degrees and the lower upper Glaces at 65 degrees.
-
Type 74 [8.3]
* Same issues as STB-1

Further info
* APHE slope modifiers underperform against sloped armour
* APDS underperforms in penetration
* APDS, HEAT underperform in post penetration damage
* M318A1, M332 APCR severly underperform in penetration