IDEC_DEBIGGER_NOtes.txt

IDEC DEBUGGER

### ERROR LED ##########
Overcurrent protection function (not a thermal shutdown function).
Overcurrent detected with 4 outputs as 1 group. (Group 1: Q0 to Q3, Group 2: Q4 to Q7, Group 3:
Q10 to Q13, Group 4: Q14 to Q17)
When overcurrent is detected, the 4 outputs in the corresponding group are turned off for a fixed
period (1 s). When overcurrent is detected, a special internal relay turns on (M8172 to M8175) and
the error LED [ERR] turns on


###Battery::

Battery voltage (D8056)
Stores the measured battery voltage in mV. The battery voltage fluctuates according to the usage environment.
When the power is turned on, this value is 65,535 until the initial battery voltage measurement has completed.
This value is 0 when there is a measurement error or when there is no battery.
Battery voltage measurement (M8074)
Shows the battery voltage measurement status.
0: Battery voltage measurement completed
1: Battery voltage being measured
The battery voltage can also be measured by writing 1. The measured value in mV is stored in D8056. The value is reset to 0

######### User program execution error:: M8004
######### Comm error:: M8005 page 531 breakdown of Bits
######### Calendar Errors: M8013, M 8014
##### SD CARD ERROR M8255 bit set pg 492 manual
### REcipie err M8265

## D8069 thru D8099 slave device error R/O