bhuvanchandradv

boot-log-apalis-imx6

May 16th, 2017
80
0
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 32.70 KB | None | 0 0
  1. Industrial temperature grade DDR3 timings.
  2. Trying to boot from MMC1
  3.  
  4.  
  5. U-Boot 2016.11-2.7.2+g60021a4 (Apr 10 2017 - 02:10:44 +0200)
  6.  
  7. CPU: Freescale i.MX6Q rev1.5 at 792 MHz
  8. Reset cause: POR
  9. I2C: ready
  10. DRAM: 2 GiB
  11. PMIC: device id: 0x10, revision id: 0x21, programmed
  12. MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
  13. auto-detected panel HDMI
  14. Display: HDMI (1024x768)
  15. In: serial
  16. Out: serial
  17. Err: serial
  18. Model: Toradex Apalis iMX6 Quad 2GB IT V1.1B, Serial# 04920835
  19. Net: using PHY at 7
  20. FEC [PRIME]
  21. Hit any key to stop autoboot: 1  0
  22. gpio: pin 77 (gpio 77) value is 1
  23. Warning: value of pin is still 0
  24. Booting from internal eMMC chip...
  25. reading imx6q-apalis-eval.dtb
  26. 50113 bytes read in 18 ms (2.7 MiB/s)
  27. reading uImage
  28. 5330224 bytes read in 160 ms (31.8 MiB/s)
  29. ## Booting kernel from Legacy Image at 11000000 ...
  30. Image Name: Linux-4.1.39-00366-g5ea20b306f05
  31. Image Type: ARM Linux Kernel Image (uncompressed)
  32. Data Size: 5330160 Bytes = 5.1 MiB
  33. Load Address: 10008000
  34. Entry Point: 10008000
  35. Verifying Checksum ... OK
  36. ## Flattened Device Tree blob at 12000000
  37. Booting using the fdt blob at 0x12000000
  38. Loading Kernel Image ... OK
  39. Using Device Tree in place at 12000000, end 1200f3c0
  40.  
  41. Starting kernel ...
  42.  
  43. [ 0.341792] mxc_hdmi 20e0000.hdmi_video: Error only one HDMI output support now!
  44. [ 0.341806] mxc_sdc_fb fb@1: NO mxc display driver found!
  45. [ 1.333120] snvs-secvio 20cc000.caam-snvs: can't get snvs clock
  46. [ 1.861801] imx6q-pcie 1ffc000.pcie: phy link never came up
  47. [ 1.867463] imx6q-pcie 1ffc000.pcie: failed to initialize host
  48. [ 2.393614] systemd[1]: Failed to start Load Kernel Modules.
  49. [FAILED] Failed to start Load Kernel Modules.
  50. See 'systemctl status systemd-modules-load.service' for details.
  51. [ OK ] Started Export GPIOs to user space.
  52. [ OK ] Started File System Check on Root Device.
  53. Starting Remount Root and Kernel File Systems...
  54. Mounting FUSE Control File System...
  55. Starting Apply Kernel Variables...
  56. [ OK ] Mounted FUSE Control File System.
  57. [ OK ] Started Journal Service.
  58. [ OK ] Started Remount Root and Kernel File Systems.
  59. [ OK ] Started Apply Kernel Variables.
  60. Starting udev Coldplug all Devices...
  61. Starting Create Static Device Nodes in /dev...
  62. Starting Flush Journal to Persistent Storage...
  63. [ OK ] Started Create Static Device Nodes in /dev.
  64. Starting udev Kernel Device Manager...
  65. [ OK ] Reached target Local File Systems (Pre).
  66. Mounting /var/volatile...
  67. [ OK ] Mounted /var/volatile.
  68. [ OK ] Started udev Kernel Device Manager.
  69. Starting Load/Save Random Seed...
  70. [ OK ] Reached target Local File Systems.
  71. [ OK ] Started Load/Save Random Seed.
  72. [ OK ] Started udev Coldplug all Devices.
  73. [ OK ] Found device /dev/ttymxc0.
  74. [ OK ] Created slice system-systemd\x2dbacklight.slice.
  75. Starting Load/Save Screen Backlight...htness of backlight:backlight...
  76. [ OK ] Started Load/Save Screen Backlight Brightness of backlight:backlight.
  77.  
  78. Industrial temperature grade DDR3 timings.
  79. Trying to boot from MMC1
  80.  
  81.  
  82. U-Boot 2016.11-2.7.2+g60021a4 (Apr 10 2017 - 02:10:44 +0200)
  83.  
  84. CPU: Freescale i.MX6Q rev1.5 at 792 MHz
  85. Reset cause: POR
  86. I2C: ready
  87. DRAM: 2 GiB
  88. PMIC: device id: 0x10, revision id: 0x21, programmed
  89. MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
  90. auto-detected panel vga-rgb
  91. Display: vga-rgb (640x480)
  92. In: serial
  93. Out: serial
  94. Err: serial
  95. Model: Toradex Apalis iMX6 Quad 2GB IT V1.1B, Serial# 04920835
  96. Net: using PHY at 7
  97. FEC [PRIME]
  98. Hit any key to stop autoboot: 1  0
  99. Booting from internal eMMC chip...
  100. reading imx6q-apalis-eval.dtb
  101. 50113 bytes read in 18 ms (2.7 MiB/s)
  102. reading uImage
  103. 5330224 bytes read in 161 ms (31.6 MiB/s)
  104. ## Booting kernel from Legacy Image at 11000000 ...
  105. Image Name: Linux-4.1.39-00366-g5ea20b306f05
  106. Image Type: ARM Linux Kernel Image (uncompressed)
  107. Data Size: 5330160 Bytes = 5.1 MiB
  108. Load Address: 10008000
  109. Entry Point: 10008000
  110. Verifying Checksum ... OK
  111. ## Flattened Device Tree blob at 12000000
  112. Booting using the fdt blob at 0x12000000
  113. Loading Kernel Image ... OK
  114. Using Device Tree in place at 12000000, end 1200f3c0
  115.  
  116. Starting kernel ...
  117.  
  118. [ 0.000000] Booting Linux on physical CPU 0x0
  119. [ 0.000000] Initializing cgroup subsys cpu
  120. [ 0.000000] Initializing cgroup subsys cpuacct
  121. [ 0.000000] Linux version 4.1.39-00366-g5ea20b306f05 (dvb@tdx-in-nb-0014) (gcc version 6.3.1 20170109 (Linaro GCC 6.3-2017.02) ) #117 SMP Tue May 16 10:12:59 IST 2017
  122. [ 0.000000] CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c5387d
  123. [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  124. [ 0.000000] Machine model: Toradex Apalis iMX6Q/D Module on Apalis Evaluation Board
  125. [ 0.000000] Reserved memory: created CMA memory pool at 0x62000000, size 320 MiB
  126. [ 0.000000] Reserved memory: initialized node linux,cma, compatible id shared-dma-pool
  127. [ 0.000000] Memory policy: Data cache writealloc
  128. [ 0.000000] PERCPU: Embedded 12 pages/cpu @d0efc000 s16588 r8192 d24372 u49152
  129. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 521024
  130. [ 0.000000] Kernel command line: enable_wait_mode=off vmalloc=400M ip=off root=/dev/mmcblk0p2 rw,noatime rootfstype=ext3 rootwait fec_mac=00:14:2d:4b:16:03 consoleblank=0 no_console_suspend=1 console=tty1 console=ttymxc0,115200n8 video=mxcfb0:dev=hdmi,640x480M@60,if=RGB24 video=mxcfb3:dev=ldb,bpp=32
  131. [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  132. [ 0.000000] Dentry cache hash table entries: 262144 (order: 8, 1048576 bytes)
  133. [ 0.000000] Inode-cache hash table entries: 131072 (order: 7, 524288 bytes)
  134. [ 0.000000] Memory: 1740284K/2097152K available (6927K kernel code, 240K rwdata, 2224K rodata, 332K init, 422K bss, 29188K reserved, 327680K cma-reserved, 425984K highmem)
  135. [ 0.000000] Virtual kernel memory layout:
  136. [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  137. [ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
  138. [ 0.000000] vmalloc : 0xe6800000 - 0xff000000 ( 392 MB)
  139. [ 0.000000] lowmem : 0x80000000 - 0xe6000000 (1632 MB)
  140. [ 0.000000] pkmap : 0x7fe00000 - 0x80000000 ( 2 MB)
  141. [ 0.000000] modules : 0x7f000000 - 0x7fe00000 ( 14 MB)
  142. [ 0.000000] .text : 0x80008000 - 0x808f80fc (9153 kB)
  143. [ 0.000000] .init : 0x808f9000 - 0x8094c000 ( 332 kB)
  144. [ 0.000000] .data : 0x8094c000 - 0x80988120 ( 241 kB)
  145. [ 0.000000] .bss : 0x80988120 - 0x809f19e0 ( 423 kB)
  146. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  147. [ 0.000000] Hierarchical RCU implementation.
  148. [ 0.000000] Additional per-CPU info printed with stalls.
  149. [ 0.000000] NR_IRQS:16 nr_irqs:16 16
  150. [ 0.000000] L2C-310 erratum 769419 enabled
  151. [ 0.000000] L2C-310 enabling early BRESP for Cortex-A9
  152. [ 0.000000] L2C-310 full line of zeros enabled for Cortex-A9
  153. [ 0.000000] L2C-310 ID prefetch enabled, offset 16 lines
  154. [ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled
  155. [ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB
  156. [ 0.000000] L2C-310: CACHE_ID 0x410000c7, AUX_CTRL 0x76470001
  157. [ 0.000000] mxc_clocksource_init 3000000
  158. [ 0.000000] Switching to timer-based delay loop, resolution 333ns
  159. [ 0.000006] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 715827882841ns
  160. [ 0.000025] clocksource mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
  161. [ 0.001027] Console: colour dummy device 80x30
  162. [ 0.001626] console [tty1] enabled
  163. [ 0.001653] Calibrating delay loop (skipped), value calculated using timer frequency.. 6.00 BogoMIPS (lpj=30000)
  164. [ 0.001691] pid_max: default: 32768 minimum: 301
  165. [ 0.001802] Mount-cache hash table entries: 4096 (order: 2, 16384 bytes)
  166. [ 0.001829] Mountpoint-cache hash table entries: 4096 (order: 2, 16384 bytes)
  167. [ 0.002418] Initializing cgroup subsys freezer
  168. [ 0.002454] Initializing cgroup subsys debug
  169. [ 0.002491] CPU: Testing write buffer coherency: ok
  170. [ 0.002812] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  171. [ 0.002918] Setting up static identity map for 0x10008280 - 0x100082d8
  172. [ 0.004800] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
  173. [ 0.005455] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
  174. [ 0.006112] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
  175. [ 0.006183] Brought up 4 CPUs
  176. [ 0.006264] SMP: Total of 4 processors activated (24.00 BogoMIPS).
  177. [ 0.006286] CPU: All CPU(s) started in SVC mode.
  178. [ 0.006786] devtmpfs: initialized
  179. [ 0.019548] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  180. [ 0.019978] clocksource jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  181. [ 0.020037] futex hash table entries: 1024 (order: 4, 65536 bytes)
  182. [ 0.040689] pinctrl core: initialized pinctrl subsystem
  183. [ 0.041846] NET: Registered protocol family 16
  184. [ 0.050166] DMA: preallocated 256 KiB pool for atomic coherent allocations
  185. [ 0.079702] cpuidle: using governor ladder
  186. [ 0.109699] cpuidle: using governor menu
  187. [ 0.109980] CPU identified as i.MX6Q, silicon rev 1.5
  188. [ 0.135091] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers.
  189. [ 0.135138] hw-breakpoint: maximum watchpoint size is 4 bytes.
  190. [ 0.136115] imx6q-pinctrl 20e0000.iomuxc: initialized IMX pinctrl driver
  191. [ 0.137740] imx-gpc 20dc000.gpc: no fsl,ldo-bypass found!
  192. [ 0.149415] usb_host_vbus: supplied by usb_host_vbus_hub
  193. [ 0.149795] vgaarb: loaded
  194. [ 0.150600] SCSI subsystem initialized
  195. [ 0.151099] usbcore: registered new interface driver usbfs
  196. [ 0.151183] usbcore: registered new interface driver hub
  197. [ 0.151287] usbcore: registered new device driver usb
  198. [ 0.151995] i2c-gpio i2c@0: using pins 80 (SDA) and 62 (SCL)
  199. [ 0.152985] i2c i2c-1: IMX I2C adapter registered
  200. [ 0.153021] i2c i2c-1: can't use DMA
  201. [ 0.154569] stmpe-i2c 2-0041: stmpe811 detected, chip id: 0x811
  202. [ 0.156452] i2c i2c-2: IMX I2C adapter registered
  203. [ 0.156487] i2c i2c-2: can't use DMA
  204. [ 0.157172] i2c i2c-3: IMX I2C adapter registered
  205. [ 0.157205] i2c i2c-3: can't use DMA
  206. [ 0.157373] Linux video capture interface: v2.00
  207. [ 0.157441] pps_core: LinuxPPS API ver. 1 registered
  208. [ 0.157462] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  209. [ 0.157514] PTP clock support registered
  210. [ 0.169753] imx-ipuv3 2400000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
  211. [ 0.189747] imx-ipuv3 2800000.ipu: IPU DMFC NORMAL mode: 1(0~1), 5B(4,5), 5F(6,7)
  212. [ 0.190692] mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 driver probed ipu0 csi1
  213. [ 0.190735] mxc_mipi_csi2 21dc000.mipi_csi: i.MX MIPI CSI2 dphy version is 0x3130302a
  214. [ 0.190844] MIPI CSI2 driver module loaded
  215. [ 0.191071] Advanced Linux Sound Architecture Driver Initialized.
  216. [ 0.192803] Switched to clocksource mxc_timer1
  217. [ 0.203594] NET: Registered protocol family 2
  218. [ 0.204383] TCP established hash table entries: 16384 (order: 4, 65536 bytes)
  219. [ 0.204554] TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
  220. [ 0.204814] TCP: Hash tables configured (established 16384 bind 16384)
  221. [ 0.204906] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  222. [ 0.204999] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  223. [ 0.205261] NET: Registered protocol family 1
  224. [ 0.205565] RPC: Registered named UNIX socket transport module.
  225. [ 0.205595] RPC: Registered udp transport module.
  226. [ 0.205615] RPC: Registered tcp transport module.
  227. [ 0.205633] RPC: Registered tcp NFSv4.1 backchannel transport module.
  228. [ 0.206389] CPU PMU: Failed to parse /soc/pmu/interrupt-affinity[0]
  229. [ 0.206457] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available
  230. [ 0.208234] Bus freq driver module loaded
  231. [ 0.215317] VFS: Disk quotas dquot_6.6.0
  232. [ 0.215511] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  233. [ 0.216563] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  234. [ 0.217194] NFS: Registering the id_resolver key type
  235. [ 0.217250] Key type id_resolver registered
  236. [ 0.217274] Key type id_legacy registered
  237. [ 0.217312] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  238. [ 0.217832] ntfs: driver 2.1.32 [Flags: R/W].
  239. [ 0.218318] fuse init (API version 7.23)
  240. [ 0.222382] bounce: pool size: 64 pages
  241. [ 0.222426] io scheduler noop registered
  242. [ 0.222454] io scheduler deadline registered
  243. [ 0.222641] io scheduler cfq registered (default)
  244. [ 0.225071] backlight supply power not found, using dummy regulator
  245. [ 0.226693] MIPI DSI driver module loaded
  246. [ 0.228090] 20e0000.hdmi_video supply HDMI not found, using dummy regulator
  247. [ 0.230133] mxc_hdmi 20e0000.hdmi_video: Detected HDMI controller 0x13:0xa:0xa0:0xc1
  248. [ 0.230188] fbcvt: 640x480@60: CVT Name - .307M3
  249. [ 0.230312] mxc_sdc_fb fb@0: registered mxc display driver hdmi
  250. [ 0.233693] mxc_sdc_fb fb@0: 640x480 h_sync,r,l: 96,16,48 v_sync,l,u: 2,10,33 pixclock=25174000 Hz
  251. [ 0.286116] mxc_sdc_fb fb@0: 640x480 h_sync,r,l: 96,16,48 v_sync,l,u: 2,10,33 pixclock=25174000 Hz
  252. [ 0.306194] Console: switching to colour frame buffer device 80x30
  253. [ 0.347570] mxc_hdmi 20e0000.hdmi_video: Error only one HDMI output support now!
  254. [ 0.351445] mxc_sdc_fb fb@1: NO mxc display driver found!
  255. [ 0.353548] mxc_sdc_fb fb@2: registered mxc display driver lcd
  256. [ 0.359480] mxc_sdc_fb fb@2: 800x480 h_sync,r,l: 20,60,40 v_sync,l,u: 10,10,10 pixclock=27000000 Hz
  257. [ 0.377804] mxc_sdc_fb fb@3: registered mxc display driver ldb
  258. [ 0.392294] mxc_sdc_fb fb@3: 1024x768 h_sync,r,l: 136,24,160 v_sync,l,u: 6,3,29 pixclock=65002000 Hz
  259. [ 0.402893] imx-ipuv3 2800000.ipu: IPU DMFC DP HIGH RESOLUTION: 1(0,1), 5B(2~5), 5F(6,7)
  260. [ 0.418480] imx-sdma 20ec000.sdma: no iram assigned, using external mem
  261. [ 0.421240] imx-sdma 20ec000.sdma: no event needs to be remapped
  262. [ 0.423834] imx-sdma 20ec000.sdma: loaded firmware 3.3
  263. [ 0.428611] imx-sdma 20ec000.sdma: initialized
  264. [ 0.432464] pfuze100-regulator 2-0008: Full layer: 2, Metal layer: 1
  265. [ 0.435291] pfuze100-regulator 2-0008: FAB: 0, FIN: 0
  266. [ 0.437413] pfuze100-regulator 2-0008: pfuze100 found.
  267. [ 0.453596] 2020000.serial: ttymxc0 at MMIO 0x2020000 (irq = 27, base_baud = 5000000) is a IMX
  268. [ 1.361884] console [ttymxc0] enabled
  269. [ 1.368505] 21e8000.serial: ttymxc1 at MMIO 0x21e8000 (irq = 303, base_baud = 5000000) is a IMX
  270. [ 1.381850] 21f0000.serial: ttymxc3 at MMIO 0x21f0000 (irq = 304, base_baud = 5000000) is a IMX
  271. [ 1.395207] 21f4000.serial: ttymxc4 at MMIO 0x21f4000 (irq = 305, base_baud = 5000000) is a IMX
  272. [ 1.408972] [drm] Initialized drm 1.1.0 20060810
  273. [ 1.416187] [drm] Initialized vivante 1.0.0 20120216 on minor 0
  274. [ 1.432479] brd: module loaded
  275. [ 1.442851] loop: module loaded
  276. [ 1.449225] ahci-imx 2200000.sata: fsl,transmit-level-mV not specified, using 00000024
  277. [ 1.461254] ahci-imx 2200000.sata: fsl,transmit-boost-mdB not specified, using 00000480
  278. [ 1.473345] ahci-imx 2200000.sata: fsl,transmit-atten-16ths not specified, using 00002000
  279. [ 1.485672] ahci-imx 2200000.sata: fsl,receive-eq-mdB not specified, using 05000000
  280. [ 1.501144] ahci-imx 2200000.sata: SSS flag set, parallel bus scan disabled
  281. [ 1.510476] ahci-imx 2200000.sata: AHCI 0001.0300 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  282. [ 1.523899] ahci-imx 2200000.sata: flags: ncq sntf stag pm led clo only pmp pio slum part ccc apst
  283. [ 1.539115] scsi host0: ahci-imx
  284. [ 1.545030] ata1: SATA max UDMA/133 mmio [mem 0x02200000-0x02203fff] port 0x100 irq 315
  285. [ 1.559847] spi_imx 2008000.ecspi: probed
  286. [ 1.567060] spi_imx 200c000.ecspi: probed
  287. [ 1.574252] vcan: Virtual CAN interface driver
  288. [ 1.580882] CAN device driver interface
  289. [ 1.587065] 2090000.flexcan supply xceiver not found, using dummy regulator
  290. [ 1.597031] flexcan 2090000.flexcan: device registered (reg_base=e6aa0000, irq=36)
  291. [ 1.609075] 2094000.flexcan supply xceiver not found, using dummy regulator
  292. [ 1.619077] flexcan 2094000.flexcan: device registered (reg_base=e6aa8000, irq=37)
  293. [ 1.632303] 2188000.ethernet supply phy not found, using dummy regulator
  294. [ 1.653240] pps pps0: new PPS source ptp0
  295. [ 1.660715] libphy: fec_enet_mii_bus: probed
  296. [ 1.668939] fec 2188000.ethernet eth0: registered PHC device 0
  297. [ 1.677382] usbcore: registered new interface driver asix
  298. [ 1.685016] usbcore: registered new interface driver ax88179_178a
  299. [ 1.693261] usbcore: registered new interface driver cdc_ether
  300. [ 1.701141] usbcore: registered new interface driver net1080
  301. [ 1.708826] usbcore: registered new interface driver cdc_subset
  302. [ 1.716685] usbcore: registered new interface driver zaurus
  303. [ 1.724156] usbcore: registered new interface driver cdc_ncm
  304. [ 1.731528] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  305. [ 1.739827] ehci-pci: EHCI PCI platform driver
  306. [ 1.746053] ehci-mxc: Freescale On-Chip EHCI Host driver
  307. [ 1.753249] usbcore: registered new interface driver usb-storage
  308. [ 1.761095] usbcore: registered new interface driver usbserial
  309. [ 1.768695] usbcore: registered new interface driver usbserial_generic
  310. [ 1.776954] usbserial: USB Serial support registered for generic
  311. [ 1.784749] usbcore: registered new interface driver ftdi_sio
  312. [ 1.792226] usbserial: USB Serial support registered for FTDI USB Serial Device
  313. [ 1.802899] usbcore: registered new interface driver pl2303
  314. [ 1.810154] usbserial: USB Serial support registered for pl2303
  315. [ 1.819036] 2184800.usbmisc supply vbus-wakeup not found, using dummy regulator
  316. [ 1.841423] ci_hdrc ci_hdrc.1: EHCI Host Controller
  317. [ 1.847981] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
  318. [ 1.872862] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
  319. [ 1.880742] hub 1-0:1.0: USB hub found
  320. [ 1.886163] hub 1-0:1.0: 1 port detected
  321. [ 1.892707] mousedev: PS/2 mouse device common for all mice
  322. [ 1.902840] ata1: SATA link down (SStatus 0 SControl 300)
  323. [ 1.908812] input: stmpe-ts as /devices/soc0/soc/2100000.aips-bus/21a4000.i2c/i2c-2/2-0041/stmpe-ts/input/input0
  324. [ 1.909629] rtc-ds1307: probe of 1-0068 failed with error -5
  325. [ 1.910340] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc0
  326. [ 1.910473] i2c /dev entries driver
  327. [ 1.911834] mxc_v4l2_output v4l2_out: V4L2 device registered as video16
  328. [ 1.911989] mxc_v4l2_output v4l2_out: V4L2 device registered as video17
  329. [ 1.912141] mxc_v4l2_output v4l2_out: V4L2 device registered as video18
  330. [ 1.912298] mxc_v4l2_output v4l2_out: V4L2 device registered as video19
  331. [ 1.912454] mxc_v4l2_output v4l2_out: V4L2 device registered as video20
  332. [ 1.914011] imx2-wdt 20bc000.wdog: timeout 60 sec (nowayout=0)
  333. [ 1.914358] sdhci: Secure Digital Host Controller Interface driver
  334. [ 1.914361] sdhci: Copyright(c) Pierre Ossman
  335. [ 1.914369] sdhci-pltfm: SDHCI platform and OF driver helper
  336. [ 1.915436] /soc/aips-bus@02100000/usdhc@02190000: voltage-ranges unspecified
  337. [ 1.915466] sdhci-esdhc-imx 2190000.usdhc: Got CD GPIO
  338. [ 1.916939] sdhci-esdhc-imx 2190000.usdhc: No vqmmc regulator found
  339. [ 1.962943] mmc1: SDHCI controller on 2190000.usdhc [2190000.usdhc] using ADMA
  340. [ 1.965423] /soc/aips-bus@02100000/usdhc@02194000: voltage-ranges unspecified
  341. [ 1.965450] sdhci-esdhc-imx 2194000.usdhc: Got CD GPIO
  342. [ 1.966857] sdhci-esdhc-imx 2194000.usdhc: No vqmmc regulator found
  343. [ 2.012961] mmc2: SDHCI controller on 2194000.usdhc [2194000.usdhc] using ADMA
  344. [ 2.015610] /soc/aips-bus@02100000/usdhc@02198000: voltage-ranges unspecified
  345. [ 2.016043] sdhci-esdhc-imx 2198000.usdhc: No vqmmc regulator found
  346. [ 2.052838] mmc0: SDHCI controller on 2198000.usdhc [2198000.usdhc] using ADMA
  347. [ 2.067360] mxc_vpu 2040000.vpu_fsl: VPU initialized
  348. [ 2.067942] mxc_vdoa 21e4000.vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
  349. [ 2.068920] Galcore version 5.0.11.41671
  350. [ 2.127386] mmc0: MAN_BKOPS_EN bit is not set
  351. [ 2.146820] mmc0: new DDR MMC card at address 0001
  352. [ 2.147753] mmcblk0: mmc0:0001 004G90 3.69 GiB
  353. [ 2.148019] mmcblk0boot0: mmc0:0001 004G90 partition 1 2.00 MiB
  354. [ 2.148240] mmcblk0boot1: mmc0:0001 004G90 partition 2 2.00 MiB
  355. [ 2.174380] mmcblk0: p1 p2
  356. [ 2.193813] ahci-imx 2200000.sata: no device found, disabling link.
  357. [ 2.202485] ahci-imx 2200000.sata: pass ahci_imx..hotplug=1 to enable hotplug
  358. [ 2.484093] caam 2100000.caam: Entropy delay = 3200
  359. [ 2.532851] usb 1-1: new high-speed USB device number 2 using ci_hdrc
  360. [ 2.551831] caam 2100000.caam: Instantiated RNG4 SH0
  361. [ 2.612592] caam 2100000.caam: Instantiated RNG4 SH1
  362. [ 2.619512] caam 2100000.caam: device ID = 0x0a16010000000000 (Era -524)
  363. [ 2.628162] caam 2100000.caam: job rings = 2, qi = 0
  364. [ 2.684074] hub 1-1:1.0: USB hub found
  365. [ 2.689884] hub 1-1:1.0: 4 ports detected
  366. [ 2.727861] caam algorithms registered in /proc/crypto
  367. [ 2.738773] caam_jr 2101000.jr0: registering rng-caam
  368. [ 2.746490] snvs-secvio 20cc000.caam-snvs: can't get snvs clock
  369. [ 2.754272] snvs-secvio 20cc000.caam-snvs: violation handlers armed - non-secure state
  370. [ 2.765833] hidraw: raw HID events driver (C) Jiri Kosina
  371. [ 2.773171] usbcore: registered new interface driver usbhid
  372. [ 2.780432] usbhid: USB HID core driver
  373. [ 2.791490] stmpe-adc stmpe-adc: Initialized
  374. [ 2.799472] sgtl5000 2-000a: sgtl5000 revision 0x11
  375. [ 2.959043] sgtl5000 2-000a: Using internal LDO instead of VDDD
  376. [ 2.980600] imx-sgtl5000 sound: sgtl5000 <-> 2028000.ssi mapping ok
  377. [ 2.992662] imx-spdif sound-spdif: snd-soc-dummy-dai <-> 2004000.spdif mapping ok
  378. [ 3.007973] imx-audio-hdmi sound-hdmi: hdmi-hifi <-> soc:hdmi_audio@00120000 mapping ok
  379. [ 3.021231] NET: Registered protocol family 10
  380. [ 3.028548] NET: Registered protocol family 17
  381. [ 3.034840] can: controller area network core (rev 20120528 abi 9)
  382. [ 3.042879] NET: Registered protocol family 29
  383. [ 3.049181] can: raw protocol (rev 20120528)
  384. [ 3.055306] can: broadcast manager protocol (rev 20120528 t)
  385. [ 3.062831] can: netlink gateway (rev 20130117) max_hops=1
  386. [ 3.070680] Key type dns_resolver registered
  387. [ 3.078715] Registering SWP/SWPB emulation handler
  388. [ 3.086537] 1ffc000.pcie supply pcie-bus not found, using dummy regulator
  389. [ 3.362859] usb 1-1.1: new high-speed USB device number 3 using ci_hdrc
  390. [ 3.429900] imx6q-pcie 1ffc000.pcie: phy link never came up
  391. [ 3.437479] imx6q-pcie 1ffc000.pcie: failed to initialize host
  392. [ 3.445346] imx6q-pcie: probe of 1ffc000.pcie failed with error -22
  393. [ 3.456435] input: gpio-keys as /devices/soc0/gpio-keys/input/input1
  394. [ 3.465079] snvs_rtc 20cc000.snvs:snvs-rtc-lp: setting system clock to 1970-01-01 00:00:01 UTC (1)
  395. [ 3.488514] usb_otg_vbus: disabling
  396. [ 3.494299] ALSA device list:
  397. [ 3.499187] #0: imx6q-apalis-sgtl5000
  398. [ 3.504928] #1: imx-spdif
  399. [ 3.509543] #2: imx-hdmi-soc
  400. [ 3.515079] hub 1-1.1:1.0: USB hub found
  401. [ 3.520894] hub 1-1.1:1.0: 4 ports detected
  402. [ 3.536554] EXT4-fs (mmcblk0p2): mounting ext3 file system using the ext4 subsystem
  403. [ 3.550626] EXT4-fs (mmcblk0p2): INFO: recovery required on readonly filesystem
  404. [ 3.561522] EXT4-fs (mmcblk0p2): write access will be enabled during recovery
  405. [ 3.651759] EXT4-fs (mmcblk0p2): recovery complete
  406. [ 3.660065] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
  407. [ 3.671950] VFS: Mounted root (ext3 filesystem) readonly on device 179:2.
  408. [ 3.681919] devtmpfs: mounted
  409. [ 3.687140] Freeing unused kernel memory: 332K (808f9000 - 8094c000)
  410. [ 3.790363] systemd[1]: System time before build time, advancing clock.
  411. [ 3.810015] random: systemd urandom read with 21 bits of entropy available
  412. [ 3.822784] systemd[1]: systemd 230 running in system mode. (+PAM -AUDIT -SELINUX +IMA -APPARMOR +SMACK +SYSVINIT +UTMP -LIBCRYPTSETUP -GCRYPT -GNUTLS +ACL +XZ -LZ4 -SECCOMP +BLKID -ELFUTILS +KMOD -IDN)
  413. [ 3.847425] systemd[1]: Detected architecture arm.
  414.  
  415. Welcome to The Γ…ngstrΓΆm Distribution v2016.12!
  416.  
  417. [ 3.873285] systemd[1]: Set hostname to <apalis-imx6>.
  418. [ 4.089348] systemd[1]: Listening on Journal Socket.
  419. [ OK ] Listening on Journal Socket.
  420. [ 4.113250] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
  421. [ OK ] Started Dispatch Password Requests to Console Directory Watch.
  422. [ 4.142996] systemd[1]: Reached target Swap.
  423. [ OK ] Reached target Swap.
  424. [ 4.163110] systemd[1]: Listening on udev Control Socket.
  425. [ OK ] Listening on udev Control Socket.
  426. [ 4.193227] systemd[1]: Listening on Network Service Netlink Socket.
  427. [ OK ] Listening on Network Service Netlink Socket.
  428. [ 4.223039] systemd[1]: Listening on udev Kernel Socket.
  429. [ OK ] Listening on udev Kernel Socket.
  430. [ 4.253366] systemd[1]: Created slice System Slice.
  431. [ OK ] Created slice System Slice.
  432. [ 4.287017] systemd[1]: Starting Export GPIOs to user space...
  433. Starting Export GPIOs to user space...
  434. [ 4.319076] systemd[1]: Mounting Temporary Directory...
  435. Mounting Temporary Directory...
  436. [ 4.358565] systemd[1]: Starting Setup Virtual Console...
  437. Starting Setup Virtual Console...
  438. [ 4.388017] systemd[1]: Starting File System Check on Root Device...
  439. Starting File System Check on Root Device...
  440. [ 4.413950] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
  441. [ OK ] Started Forwar[ 4.429965] systemd[1]: Reached target Paths.
  442. d Password Requests to Wall Direc[ 4.442061] systemd[1]: Created slice User and Session Slice.
  443. tory Watch.
  444. [ OK ] [ 4.453789] systemd[1]: Reached target Slices.
  445. Reached target Paths.
  446. [ OK ] Created slice User and Session Slice.
  447. [ OK 4.471958] systemd[1]: Starting Load Kernel Modules...
  448. [0m] Reached target Slices.
  449. [ 4.481202] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
  450. Starting Load Kernel Mod[ 4.493061] systemd[1]: Created slice system-serial\x2dgetty.slice.
  451. ules...
  452. [ OK ] List[ 4.503233] systemd[1]: Reached target Remote File Systems.
  453. ening on /dev/initctl Compatibili[ 4.513863] systemd[1]: Created slice system-getty.slice.
  454. ty Named Pipe.
  455. [ OK ] Created slice system-serial\x2dgetty.slice.
  456. [ OK 4.525844] systemd[1]: Mounting Debug File System...
  457. 0m] Reached target Remote File Sy[ 4.536127] systemd[1]: Listening on Journal Socket (/dev/log).
  458. stems.
  459. [ OK ] Created slice system-getty.slice.
  460. [ 4.547644] systemd[1]: Starting Journal Service...
  461. Mounting Debug File System...
  462. [ OK ] Listening on Journal Socket (/dev/log).[ 4.559729] systemd[1]: Mounted Debug File System.
  463.  
  464. Starting Journal Servi[ 4.568741] systemd[1]: Mounted Temporary Directory.
  465. ce...
  466. [ OK ] Mounted Debug File System.
  467. [ OK ] Mounted Temporary Directory.
  468. [ 4.613914] systemd[1]: Started Export GPIOs to user space.
  469. [ OK ] Started Export GPIOs to user space.
  470. [ 4.644224] systemd[1]: Started Setup Virtual Console.
  471. [ OK ] Started Setup Virtual Console.
  472. [ 4.673788] systemd[1]: Started File System Check on Root Device.
  473. [ OK ] Started File System Check on Root Device.
  474. [ 4.713551] systemd[1]: systemd-modules-load.service: Main process exited, code=exited, status=1/FAILURE
  475. [ 4.727083] systemd[1]: Failed to start Load Kernel Modules.
  476. [FAILED] Failed to start Load Kernel Modules.
  477. See 'systemctl status systemd-modules-load.service' for details.
  478. [ 4.772950] systemd[1]: systemd-modules-load.service: Unit entered failed state.
  479. [ 4.783783] systemd[1]: systemd-modules-load.service: Failed with result 'exit-code'.
  480. [ 4.796499] systemd[1]: Started Journal Service.
  481. [ OK ] Started Journal Service.
  482. Mounting FUSE Control File System...
  483. Starting Apply Kernel Variables...
  484. Starting Remount Root and Kernel File Systems...
  485. [ 4.895405] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
  486. [ OK ] Mounted FUSE Control File System.
  487. [ OK ] Started Apply Kernel Variables.
  488. [ OK ] Started Remount Root and Kernel File Systems.
  489. Starting Flush Journal to Persistent Storage...
  490. Starting udev Coldplug all Devices...
  491. Starting Create Static Device Nodes in /dev...
  492. [ OK ] Started Create Static Device Nodes in /dev.
  493. [ 5.079798] systemd-journald[210]: Received request to flush runtime journal from PID 1
  494. [ OK ] Reached target Local File Systems (Pre).
  495. [ 5.108771] systemd-journald[210]: File /var/log/journal/3d6a222fbfdd456c86d2aaf352034ee4/system.journal corrupted or uncleanly shut down, renaming and replacing.
  496. Mounting /var/volatile...
  497. Starting udev Kernel Device Manager...
  498. [ OK ] Mounted /var/volatile.
  499. Starting Load/Save Random Seed...
  500. [ OK ] Reached target Local File Systems.
  501. [ OK ] Started udev Kernel Device Manager.
  502. [ OK ] Started Load/Save Random Seed.
  503. [ OK ] Started udev Coldplug all Devices.
  504. [ OK ] Started Flush Journal to Persistent Storage.
  505. Starting Create Volatile Files and Directories...
  506. [ OK ] Found device /dev/ttymxc0.
  507. [ OK ] Started Create Volatile Files and Directories.
  508. Starting Update UTMP about System Boot/Shutdown...
  509. Starting Network Time Synchronization...
  510. [ OK ] Created slice system-systemd\x2dbacklight.slice.
  511. Starting Load/Save Screen Backlight...htness of backlight:backlight...
  512. [ OK ] Started Update UTMP about System Boot/Shutdown.
  513. [ OK ] Started Load/Save Screen Backlight Brightness of backlight:backlight.
  514. [ OK ] Reached target Sound Card.
  515. [ OK ] Started Network Time Synchronization.
  516. [ OK ] Reached target System Initialization.
  517. [ OK ] Listening on D-Bus System Message Bus Socket.
  518. Starting sshd.socket.
  519. [ OK ] Listening on Avahi mDNS/DNS-SD Stack Activation Socket.
  520. [ OK ] Started Daily Cleanup of Temporary Directories.
  521. [ OK ] Reached target Timers.
  522. [ OK ] Listening on RPCbind Server Activation Socket.
  523. [ OK ] Reached target System Time Synchronized.
  524. [ OK ] Listening on sshd.socket.
  525. [ OK ] Reached target Sockets.
  526. [ OK ] Reached target Basic System.
  527. Starting Login Service...
  528. Starting Avahi mDNS/DNS-SD Stack...
  529. Starting Save/Restore Sound Card State...
  530. [ OK ] Started Timestamping service.
  531. Starting Load default USB gadget schema g1.schema...
  532. [ OK ] Started D-Bus System Message Bus.
  533. [ OK ] Started Avahi mDNS/DNS-SD Stack.
  534. Starting Connection service...
  535. [ OK ] Started Save/Restore Sound Card State.
  536. [FAILED] Failed to start Load default USB gadget schema g1.schema.
  537. See 'systemctl status usbg.service' for details.
  538. [ OK ] Started Connection service.
  539. [ 7.240665] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  540. [ OK ] Started Login Service.
  541. Starting Hostname Service...
  542. Starting WPA supplicant...
  543. [ OK ] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
  544. [ 7.373679] fec 2188000.ethernet eth0: Freescale FEC PHY driver [Micrel KSZ9031 Gigabit PHY] (mii_bus:phy_addr=2188000.ethernet:07, irq=70)
  545. [ 7.395319] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  546. Starting Network Service...
  547. [ OK ] Started Network Service.
  548. [ OK ] Started WPA supplicant.
  549. [ OK ] Reached target Network.
  550. Starting Permit User Sessions...
  551. [ OK ] Started Permit User Sessions.
  552. [ OK ] Started Serial Getty on ttymxc0.
  553. [ OK ] Reached target Login Prompts.
  554. [ OK ] Reached target Multi-User System.
  555. [ OK ] Started LXDE Display Manager.
  556. [ OK ] Reached target Graphical Interface.
  557. Starting Update UTMP about System Runlevel Changes...
  558. [ OK ] Started Hostname Service.
  559. [ OK ] Started Update UTMP about System Runlevel Changes.
  560. [ 7.955980] mxc_sdc_fb fb@0: 640x480 h_sync,r,l: 96,16,48 v_sync,l,u: 2,10,33 pixclock=25174000 Hz
  561. [ 7.995100] mxc_sdc_fb fb@0: 640x480 h_sync,r,l: 96,16,48 v_sync,l,u: 2,10,33 pixclock=25174000 Hz
  562. [ 8.029358] mxc_sdc_fb fb@0: 640x480 h_sync,r,l: 96,16,48 v_sync,l,u: 2,10,33 pixclock=25174000 Hz
  563. [ 8.059801] mxc_sdc_fb fb@0: 640x480 h_sync,r,l: 96,16,48 v_sync,l,u: 2,10,33 pixclock=25174000 Hz
  564. [ 8.478701] mxc_sdc_fb fb@0: 640x480 h_sync,r,l: 96,16,48 v_sync,l,u: 2,10,33 pixclock=25174000 Hz
  565.  
  566. .---O---.
  567. | | .-. o o
  568. | | |-----.-----.-----.| | .----..-----.-----.
  569. | | | __ | ---'| '--.| .-'| | |
  570. | | | | | |--- || --'| | | ' | | | |
  571. '---'---'--'--'--. |-----''----''--' '-----'-'-'-'
  572. -' |
  573. '---'
  574.  
  575. The Angstrom Distribution apalis-imx6 ttymxc0
  576.  
  577. Angstrom v2016.12 - Kernel 4.1.39-00366-g5ea20b306f05
  578.  
  579. Apalis-iMX6_LXDE-Image 2.7.2 20170410
  580.  
  581. apalis-imx6 login:
Add Comment
Please, Sign In to add comment