API tools faq
paste
Rinkk

Wisefabulous

Rinkk
Feb 2nd, 2019
185
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 8.31 KB | None | 0 0
raw download clone embed print report
  1. [2019-02-02 18:55:07] [Output] : ★ Shawn Williard extends his right hand, grabbing a knife from the toolbox, cutting open the kit box.
  2. [2019-02-02 18:55:16] [Output] : ★ Shawn Williard grasps onto the lower control arms, as he places them down aside next to the car.
  3. [2019-02-02 18:55:26] [Output] : ★ Shawn Williard proceeds to grab the steering rod spacers, as he places them along aswell.
  4. [2019-02-02 18:59:07] [Output] : ★ Shawn Williard grasps onto the impact wrench in the shop, as he proceeds to loosen the wheel nuts.
  5. [2019-02-02 18:59:18] [Output] : ★ Shawn Williard grasps onto the hydraulic jack, proceeding to put it underneath the car's jacking point-.
  6. [2019-02-02 18:59:24] [Output] : ★ -..swiftly jacking one side up into the air. ((Shawn Williard))
  7. [2019-02-02 18:59:31] [Output] : ★ Shawn Williard proceeds to fully pull the nuts off, pulling the wheel off along with it.
  8. [2019-02-02 18:59:46] [Output] : ADVERT: Yellow Cab Co is now taking fares! Call us today! - #8294
  9. [2019-02-02 18:59:50] [Output] : ★ Shawn Williard extends his right hand, opening the toolbox, grabbing a 13mm socket and rachet-..
  10. [2019-02-02 18:59:56] [Output] : ★ -..as he proceeds to undo the two bolts for the caliper,. ((Shawn Williard))
  11. [2019-02-02 19:00:13] [Output] : ★ Shawn Williard grasps onto the caliper, sliding it off the rotor as he hangs the caliper down by the-.
  12. [2019-02-02 19:00:14] [Output] : ★ -.hoses. ((Shawn Williard))
  13. [2019-02-02 19:01:03] [Output] : ★ Shawn Williard proceeds to grasp onto a 19mm socket, as he proceeds to undo the hubnut forcefully...
  14. [2019-02-02 19:01:13] [Output] : ★ ...pulling the brake disk off the hub. ((Shawn Williard))
  15.  
  16. [2019-02-02 19:02:23] [Output] : ★ Shawn Williard grasps onto a hammer, proceeding to hammer the hub off, as he then grabs the socket..
  17. [2019-02-02 19:02:27] [Output] : ★ ...oncec more. ((Shawn Williard))
  18. [2019-02-02 19:02:49] [Output] : ★ Shawn Williard proceeds to undo the two back bolts for the lower control arm, before undoing the front...
  19. [2019-02-02 19:02:58] [Output] : ★ ...one aswell, pulling the control arm off ((Shawn Williard))
  20. [2019-02-02 19:03:22] [Output] : ★ Shawn Williard proceeeds to undo the inner tie rod and the 2 bolts for the struts/coilover, pulling the...for?
  21. [2019-02-02 19:03:31] [Output] : ★ ...full hub assembly down. ((Shawn Williard))
  22.  
  23. [2019-02-02 19:07:16] [Output] : ★ Shawn Williard proceeds to grasp onto the impact wrench once more, as he goes into the car and opens the...
  24. [2019-02-02 19:07:25] [Output] : ★ ...hood by the latch, pulling it upwards. ((Shawn Williard))
  25. [2019-02-02 19:07:38] [Output] : ★ Shawn Williard proceeds to undo the three bolts for the strut, as it falls down onto the ground.
  26. [2019-02-02 19:08:21] [Output] : ★ Shawn Williard proceeds to grasp onto the coilover, grasping onto the 19mm ratchet once more, undoing...
  27. [2019-02-02 19:08:28] [Output] : ★ ...the main top-hat bolt, as he pulls the top hat off. ((Shawn Williard))
  28. [2019-02-02 19:08:38] [Output] : ★ Shawn Williard grasps onto the new Wisefab top hat, as he bolts it onto the coilover.
  29. [2019-02-02 19:09:15] [Output] : ★ Shawn Williard proceeds to mount the coilover back up, grasping onto the impact wrench, doing the 3 bolts b
  30. [2019-02-02 19:09:20] [Output] : ★ back in. ((Shawn Williard))
  31. [2019-02-02 19:10:09] [Output] : ★ Shawn Williard goes back down, grasping onto the wisefab control arm, as he proceeds to slide it...
  32. [2019-02-02 19:10:18] [Output] : ★ ...onto the subframe mounts, as he bolts it in. ((Shawn Williard))
  33. [2019-02-02 19:11:14] [Output] : ★ Shawn Williard grasps onto the tie rod spacer, as he proceeds to put it onto the inner tie rod...
  34. [2019-02-02 19:11:30] [Output] : ★ ...before bolting it down, grasping onto the outer tie rods, putting them on aswell. ((Shawn Williard))
  35. [2019-02-02 19:12:59] [Output] : ★ Shawn Williard proceeds to grasp onto the drop knuckle, bolting it onto the control arm and the..
  36. [2019-02-02 19:13:02] [Output] : ★ ...coilover. ((Shawn Williard))
  37. [2019-02-02 19:13:14] [Output] : ★ Shawn Williard grasps onto the hub once more, sliding it on along with the 19mm bolt, tightening it down.
  38. [2019-02-02 19:13:34] [Output] : ★ Shawn Williard proceeds to grasp onto the brake disk, sliding it on, as he grasps onto the caliper once...
  39. [2019-02-02 19:13:44] [Output] : ★ ...more, bolting it down. ((Shawn Williard))
  40. [2019-02-02 19:14:00] [Output] : ★ Shawn Williard bolts the rotor to the hub aswell, as he grasps onto the wheel, sliding it back onto the..
  41. [2019-02-02 19:14:04] [Output] : ★ ..hubs and tightening it down. ((Shawn Williard))
  42. [2019-02-02 19:14:35] [Output] : ★ Shawn Williard proceeds to lower the car down onto the ground, as he places the hydraulic jack onto the.
  43. [2019-02-02 19:14:39] [Output] : ★ ..other side. ((Shawn Williard))
  44. [2019-02-02 19:14:52] [Output] : ★ Shawn Williard starts pumping up onto it, as he proceeds to jack up the car on the other side.
  45. [2019-02-02 19:15:05] [Output] : ★ Shawn Williard grasps onto the impact wrench, taking the wheel nuts off, sliding the wheel off the hub.
  46. [2019-02-02 19:15:31] [Output] : ★ Shawn Williard proceeds to undo the two bolts to the brake caliper, as he then untightens the brake disk.
  47. [2019-02-02 19:15:36] [Output] : ★ Shawn Williard proceeds to slide the brake disk off the hub.
  48. [2019-02-02 19:15:52] [Output] : ★ Shawn Williard grasps onto a 19mm ratchet once more, undoing the main hub nut, as he slides the hub off.
  49. [2019-02-02 19:16:03] [Output] : ★ Shawn Williard proceeds to grasp onto the impact wrench, undoing the three bolts on the top of the..
  50. [2019-02-02 19:16:07] [Output] : ★ ..coilover. ((Shawn Williard))
  51. [2019-02-02 19:16:20] [Output] : ★ Shawn Williard puts the wrench down, as he grabs a ratchet and undoes the control arm bolts...
  52. [2019-02-02 19:16:42] [Output] : ★ -... sliding the control arm off. ((Shawn Williard))
  53. [2019-02-02 19:16:52] [Output] : ★ Shawn Williard proceeds to undo the four bolts for the coilover, as he slides the coilover out.
  54. [2019-02-02 19:17:09] [Output] : ★ Shawn Williard proceeds to grab the 19mm ratchet, undoing the nut for the top hat, grabbing the new top.
  55. [2019-02-02 19:17:13] [Output] : ★ ..hat and sliding it on., ((Shawn Williard))
  56. [2019-02-02 19:17:24] [Output] : ★ Shawn Williard would have removed the outer tie rod as he was undoing everything aswell.
  57. [2019-02-02 19:17:35] [Output] : ★ Shawn Williard proceeds to slide the coilover back in, as he does in the three bolts up top.
  58. [2019-02-02 19:18:01] [Output] : ★ Shawn Williard proceeds to grasp onto the new control arm, sliding it onto the mountings, as he does the...
  59. [2019-02-02 19:18:03] [Output] : ★ ...three bolts up. ((Shawn Williard))
  60. [2019-02-02 19:18:21] [Output] : ★ Shawn Williard grasps onto the spacer, holding it into place as he does in the 14mm alan wrench....
  61. [2019-02-02 19:18:33] [Output] : ★ ...and then installs the other tie rod. ((Shawn Williard))
  62. [2019-02-02 19:18:49] [Output] : ★ Shawn Williard grasps onto the new knuckle, as he heads towards the control arm, and bolts it up to the..
  63. [2019-02-02 19:18:51] [Output] : ★ ..coilover. ((Shawn Williard))
  64. [2019-02-02 19:19:02] [Output] : ★ Shawn Williard grasps onto the hub, as he proceeds to slide it on and do the hub nut.
  65. [2019-02-02 19:19:10] [Output] : ★ Shawn Williard grasps onto the disk, sliding it back on and doing it in.
  66.  
  67. [2019-02-02 19:19:36] [Output] : ★ Shawn Williard proceeds to grasp onto the brake caliper, bolting it back into place.
  68. [2019-02-02 19:20:02] [Output] : ★ Shawn Williard grasps onto the wheel, sliding it on the hub as he tightens the lug nuts with a wrench.
  69. [2019-02-02 19:20:11] [Output] : ★ Shawn Williard proceeds to grab a battery powered drill, grabbing a bigger drill pick.
  70. [2019-02-02 19:20:23] [Output] : ★ Shawn Williard heads to the top of the strut towers, and drills two holes for the adjustments.
  71. [2019-02-02 19:20:33] [Output] : ★ Shawn Williard proceeds to leave the drill down, and adjust the angle to the legal limits with an alan wren
  72. [2019-02-02 19:20:37] [Output] : ★ wrench. ((Shawn Williard))
  73. [2019-02-02 19:20:54] [Output] : ★ Shawn Williard heads back into the car, steering left to right, making sure the angle is correct.
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!