BPI W2 boot with SW4=1 and SD inserted

C1:80000000
C2
?
C3hswitch frequency to 0x00000046
frequency divider is 0x00000080
switch frequency to 0x00000046
frequency divider is 0x00000004
switch to SDR 8 bé
C1:80000000
C2
?
C3hswitch frequency to 0x00000046
frequency divider is 0x00000080
switch frequency to 0x00000046
frequency divider is 0x00000004
switch to SDR 8 bit
switch bus width to 0x00000008 bits success

hwsetting size: 00000BC0
C4
f
5-5
s_f
5-5-2
Goto FSBL: 0x10100000
switch frequency to 0x00000046
frequency divider is 0x00000080
switch frequency to 0x00000046
frequency divider is 0x00000004
emmc_cid[3] = 0x5F546649 emmc_cid[2] = 0xDD650152 emmc_cid[1] = 0x34454D47 emmc_cid[0] = 0x38000115
switch bus width to 0x00000008 bits success
DEVICE_TYPE = 00000057
emmc_sec_count = 00E90000
switch speed to 0x00000002 success
switch frequency to 0x000000A6
frequency divider is 0x00000000
1st TX_window = 0xFFFFFFFE
1st phase TX VP0= 0x00000010
RX_window = 0xFFFFFF01
phase RX VP1= 0x00000014
Welcome to FSBL ...
[FSBL] Warm Boot: 0x00000000
[FSBL] Secure: 0x0000BEEE
[FSBL] Flash Type: 0x00000002
[FSBL] DCache Enable: 0x00000000
[FSBL] SVP = N
tee_ltc_alloc_mpa init ...
malloc_add_pool init ...
********** FW_TYPE_GOLD_TEE **********
    FW Image to 0x10200000, size=0x0007A9E0 (0x1027A9E0)
    FW Image fr 0x000C3600
********** FW_TYPE_GOLD_BL31 **********
    FW Image to 0x10120000, size=0x000062A0 (0x101262A0)
    FW Image fr 0x0013E000
********** FW_TYPE_BOOTCODE **********
    FW Image to 0x00020000, size=0x00088BA0 (0x000A8BA0)
    FW Image fr 0x00020E00
md copy audio bin
VERBOSE: bl31_setup
NOTICE:  BL31: v1.2(debug):a6c9ab6
NOTICE:  BL31: Built : 15:16:22, Apr 27 2017
INFO:    BL31: Initializing runtime services
INFO:    Start to init service std_svc
INFO:    Finish to init service std_svc
INFO:    Start to init service opteed_fast
INFO:    Finish to init service opteed_fast
INFO:    BL31: Initializing BL32
INFO:    TEE-CORE: TEE OS v2.1
INFO:    TEE-CORE: TA RAM slim vesion.
INFO:    TEE-CORE: tee os version : 0
INFO:    TEE-CORE: OTP tee os version : 0
INFO:    TEE-CORE: chip_rev_id : 30000
INFO:    TEE-CORE: check golden fw : 0
INFO:    TEE-CORE: Loaded normal F/W
INFO:    TEE-CORE: tee os version check pass.
INFO:    TEE-CORE: Initializing (b2aa60f-dev #1 Mon Aug 28 13:42:14 CST 2017 aarch64)
MESSAGE: [0x0] TEE-CORE:tee_otp_get_hw_unique_key:49: ************************     tee_otp_get_hw_unique_key chip id: 30000
MESSAGE: [0x0] TEE-CORE:tee_otp_get_hw_unique_key:54: ************************     tee_otp_get_hw_unique_key used Kf
INFO:    TEE-CORE: teecore inits done
INFO:    Core_0 TEESMC_OPTEED_RETURN_ENTRY_DONE
INFO:    Core_0 got optee_vectors (0x1020093c)
INFO:    BL31: Initialized BL32
INFO:    EXIT BL31
INFO:    bl31_to_kernel: kernel_resume_entry = 0x1e000
INFO:    bl31 jumps to EL2: LK entry

welcome to lk/MP

boot args 0x2 0x0 0x0 0x0
INIT: cpu 0, calling hook 0x603e8 (version) at level 0x3ffff, flags 0x1
version:
	arch:     ARM64
	platform: RTD1295
	target:   RTD1295
	project:  RTD1295
	buildid:  81C95C5_MON_SEP__4_01:41:29_CST_2017
initializing heap
calling constructors
initializing mp
initializing threads
initializing timers
initializing ports
creating bootstrap completion thread
top of bootstrap2()
INIT: cpu 0, calling hook 0x5ee30 (sysparam) at level 0x70000, flags 0x1
INIT: cpu 0, calling hook 0x743e4 (lwip) at level 0x70000, flags 0x1
creating bootstrap completion thread for cpu 1
creating bootstrap completion thread for cpu 2
creating bootstrap completion thread for cpu 3
initializing platform
rtd129x_pwm_pin_mux default value 0
PLL_EMMC1 = 0x00000003
switch frequency to 0x46, divder to 0x80
switch frequency to 0x46, divder to 0x4
switch_bus: width = 0x00000002
switch speed to 0x2 success
switch frequency to 0xa6, divder to 0x0
PLL_EMMC1 = 0x00001483
switch erase_group_def to 0x1 success
sec_count = 0xe90000
Erase Unit Size = 512KB * 0x1
factory_init, factory size:0x400000
MMC
Factory: pp:0, seq#:0x7, size:0x2000
sysparam_scan_factory: read SYSPARAM from factory fail!!
Bring UP slave CPUs
ViVnEVREERiBBROBtOOSSSEiE:E a:b :blll 31bil3zi311__sn_essegetttu upputa
p
NrNgOOTTeII
CNtCOEE::  T
 IBBLLIC3N1E3:I:  1Tv :1BL:.  32c1(v:1pdu. v 21e0,b(ud.e g2b):ucag()a6:dcelab96cal9bu6gi)a:n
NbgO6a 6hTcI9
oNCOEa:oTk I CbE B:60 L 3x4B1L:
03N1O :BTuIciC dlBtuEic l::   1 t B(r:5 :L181635:112:: 612B8,)6u: ai2l2 ,tA tp  rl:A p 1e25r7  v22:0e7l1 721 60:
0I172x9NF200,
 0O0:A ,I N pf r F OB2lL7a:  g23s0 1 1  70:x1
 IIn
BrLN3Fi1t81iOa:68:l:i  z iRI nE ng AitLBiLTa3E1K l: r iuRzTniLtnI8inm1ieg t is6re8 ua@nl0trixivz9mi8ci01eesn gs
e Irrv6Nu0iF0cn0Ot:ei  m
s e  s
SIetNravFrOti c: ets o
iSInNitFtaO rs:t  e tr voi  iScetnai tsrtt s dt_esorv vicin ceit
  sIstNdeFOr_:vsi vc c e
FstiInNdiF_sOs:vh c t  o
FIiiNnFniiOt: s she  t r ov Fiicinen iitss ht sdet_osrv viic cniet
s IsNtdFeO_rvs:vi  cc  e  s
StItNadFr_tsOv :t c  o
 iSnIiNtFta Ort:s  et rv o  iicSetnai tropt  stteereodv i_ifncaites t s oep
rtIeveicNdFe_ fOoa: sptt   e eFd
_IinNfFaisOs:th    t
 o I NFiinFiOn:ti  sh se   rtvoFi iicneniis tohp  sttoee revdi_nfiitca ests e opr
tvIieceNedFO_ f:o apts te   eBd
L_fI3N1aFs:tO  :In i
tI N iBaFLlOi3:1 z :in  Ig  nBiBLL3t13i2:a l
IiznINiitFnOig a:l B Li 3z2i nC
go rIeBNL_F3O32:  T E
I E SNMCFOoCr:_ eO_ P2 T  ETECDoErE_SeRM_ET1C _UROTPNE_EESTMNECTER_DOY_R_PDTEETOUNEERDN_ _REE
TNINTURRFONY_:_ DEON TN E RYB _LD3
IO1N:E NIF On
:it I iNaFlO : i Bz Led3 1  BB: LL33I21n:i t
IiINanlFiOtii:za e ldi  zB LeEdX3I 2BT L
3BIL2NF3
O1I:N
F ION :F O EX :  IT  E  X BbLITl331 1BL
_t3I1oN_F
kO:eI rN FneO : lb : l 3k1 e_ rnbtleo_3l_1k_reetronseu_lmke:e r_kneeenrtl:rnye l k=e_r rn0exes1lu_emr0e0e_es0un
mtIre_yN FeO=n: t0r y x  1e =b 0l000x311 e
j0I0NuFm0ORp:se al tt oe
   IbkENlL3F G1OB2::E    F  Lj buKm leapms3i 1lnyt jtr yuCmo  opn
tEsrL2 olt:o l eLKrE  L32e2:n t mrLcKyf  eg n
=t ry00 2
4
netif en ip 192.168.100.1 netmask 255.255.255.0 gw 192.168.100.254
calling apps_init()
HDMITx_HPD=False
------------tmp/factory/video_rpc.bin found
Sink changed, skip one step
tv_system=25 mode=1
Set ACPU share memory
------------can't find tmp/factory/000BootParam.h
Default Power-Config
EEPROM: SIZE=16384, ADRESS_MODE=2, PAGE_WRITE_SIZE=64, BUFFER_SIZE=16
PMIC is gmt,g2227
starting app rtkboot
---------------LOAD  NORMAL FW  TABLE ---------------
fw_desc_table_start = 0x00620000
fw_desc_table_ddr_base = 0x0x12418f70
[INFO] fw desc table base: 0x00620000, count: 11
[DEBUG] fw_entry = 0x12419170
Normal boot fw flow...
Kernel
	 FW Image to 0x03000000, size=0x00ec6400 (0x03ec6400)
	 FW Image fr 0x02c41600
starting app eeprom
starting app pmic
cmd_pmic_entry: set DC force PWM
pmic_testing returns 00
INIT: cpu 3, calling hook 0x22840 (slave_cpu_spin) at level 0x3ffff, flags 0x2
INIT: cpu 1, calling hook 0x22840 (slave_cpu_spin) at level 0x3ffff, flags 0x2
INIT: cpu 2, calling hook 0x22840 (slave_cpu_spin) at level 0x3ffff, flags 0x2
DT
	 FW Image to 0x02100000, size=0x0000fbeb (0x0210fbeb)
	 FW Image fr 0x028b0200
Audio
	 FW Image to 0x01b00000, size=0x00351318 (0x01e51318)
	 FW Image fr 0x028f0200
Logo
	 FW Image to 0x1e800000, size=0x007e9000 (0x1efe9000)
	 FW Image fr 0x199002000
Booting ACPU...
Bo[obtoinngdi Knegr]n 1e2l9.5. .ch
fipdt_
lCloaasdasiddfry B:o n0dixn0g21  0000x00000
00800, num =[ F D0xT0]0 r00em00ov0e1  nPBod e(P /A)ps
c[iFW
]kylin_bring[ FuDpT ]h awsdde tbtoinogt-
secFonindairsyh- kaydldrin t_bo r/icnpg_utse/cmppu h@1ws
etting
[+][AO][aio_HWEnable]
[AO]aio_CRTOn:[F
SDYTS]_ uCLpdOaCtKe_E NMAABCL aE1dd r[e s0xs98
0B0o0ot00 icm]a:g e0 x1t3afrgecet5 6a1dd
[r:AO0x]0a0i2o_8P0o00we0,rC soinztreo:0lxDA0C0Of5n_00c0l0k:

SYS_CLOCK_ENABLE2 [ 0x98000010]: 0xd80fe416
[AO]aio_PowerControlHDMIOn:
set SYS_CLOCK_ENABLE2 [ 0x98000010]: 0xd85fe416
SYS_CLOCK_ENABLE2 [ 0x98000010]: 0xd85fe416
[AO]aio_PowerControlSPDIFOn:
set SYS_CLOCK_ENABLE2 [ 0x98000010]: 0xd87fe416
SYS_CLOCK_ENABLE2 [ 0x98000010]: 0xd87fe416
[AO]aio_PowerControlI2SOn:
set SYS_CLOCK_ENABLE2 [ 0x98000010]: 0xd8ffe416
SYS_CLOCK_ENABLE2 [ 0x98000010]: 0xd8ffe416
SYS_SOFT_RESET1 [ 0x98000000]: 0xbfda1001
SYS_SOFT_RESET4 [ 0x98000050]: 0x0000801f
[AO]ao_SetDACAnalogOn:
TVE_VDAC_CTR1 [ 0x980183a0]: 0xa86c0280
AIO_O_ACANA_GCTL1 [ 0x98006604]: 0x24951504
AIO_I_ACANA_ADC_GCTL2 [ 0x98006610]: 0x880a3a00
AIO_I_ADC_TCON [ 0x980066fc]: 0x221f0000
AIO_I_ADC_TCON [ 0x980066fc]: 0x221fff00
[-][AO][aio_HWEnable]
[Audio]SetTickRate  0x000000c8
[ACPU]: Set protect 6 fail, protect 6 is already enable : 0x00000040!!

HDMI Raw Enable: AC3 DTS MPEG2 AAC DDP MLP

SPDIF Raw Enable: AC3 DTS MPEG2 AAC MLP

Force 2ch Format: DTS DTSHD AC3 DDP MLP AAC WMAPRO



[AO][InitHDMIVideoType]HDMI Frequecny 148, resolution 25


@@@@@@@One Step TV System magic number = 0xc0de0bee, addr = 0xa001f800@@@@@@@

@@@@@@@@@ boot_info->tv_sys.interfaceType 0
HDMIOff = 0
[VO]vo->is_hdmi_off_clock_on:0
[VO_SetVideoStandard]st 25 p 1 1 0
[VO_SetVideoStandard]dp_standard:1 data0  0x00000004 data1  0x00000000
[VO_SetVideoStandard]HDMIoff 0 is_tve_on 1 user_cvbs_off 0
lvds.format 0 port_setting  0x00000381 lvds_wb 0
vo->mixer_call_dsr: 0x00000000
[VO setTVStandard 25 3D 0 0]

(TVE) TVE_DAC_mode 0,cmd->enProg 1!!
TV_NTSC_J
~~comp 0, ch2 1, mode_3D 0!!
~~comp 0, ch2 1, mode_3D 0!!
~~TVE standard#
SetVideoStandard return!

(VO_ConfigHDMI_InfoFrame) L:271, is_hdmi_plugin 1, hdmiMode 1!!Mode 1 dataByte1  0x00000000  0x00000000  0x00000000
dataByte4  0x00000000  0x00000000 int0  0x00000001

(HDMI_3D) mode 1, HDMI_gen 1, En_3D 0, Format_3D 0 scramble:0!!RGB_or_YCbCr:0 Pixel_Colocrt:0 Deep_Color:0 Deep_Depth:0 xvycc:0
[ @@not hdr tv.  clearDynamicRangeMasteringPkt

 go back SET_HDMI!!
boot_info  0xa001f600 magic  0x2452544b en 0
[AO][_AO_if_video_HDMI_mode]HDMI not enabled
[AO][+]_AO_setup_default_audio_infoframe
[AO][--]_AO_hdmi_disable(0)
[AUDIO WARNING]
[AO][_AO_hdmi_disable]do nothing, HDMI not enable  0x00000000  0x00000001
Audio_Channel_Count 1 :2CH, audio_layout:0
HDMI_Frequency 148 :1080p50,1080p60
Sampling_Frequency 3 :48K
CTS = 148500, N = 6144
[+][HDMI_gen_audio_infoframe]
CA:2CH: L,R
[-][HDMI_gen_audio_infoframe]
SYS_PLL_PSAUDA1 [ 0x98000130]: 0x0050022d
[AO][++]_AO_hdmi_enable(0)
[AUDIO WARNING]
[AO][_AO_hdmi_enable]do nothing, HDMI not enable  0x00000000  0x00000001
[AO][-]_AO_setup_default_audio_infoframe
   0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 4.1.17-g26a590a-dirty (chihchiang@dhcfae-ESC500-G3) (gcc version 4.9.4 (OpenWrt/Linaro GCC 4.9-2015.06 r47591) ) #1 SMP PREEMPT Mon Aug 14 18:03:44 CST 2017
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] alternatives: enabling workaround for ARM erratum 845719
[    0.000000] DT: cma-improve=0
[    0.000000] earlycon: Early serial console at MMIO32 0x98007800 (options '')
[    0.000000] bootconsole [uart0] enabled
[    0.192999] bl31_set_tee_protect !!!
INFO:    Non-Secure Boot or 1295 IC_REV >= B00 : no action !!
[    0.202683] bl31_set_tee_protect ret = 0
[    0.637675] ****** rtk_lockapi_init 597, chip: id=0x00000000, revision=0x00030000
[    0.646130] ****** rtk_lockapi_init 604, bypass mode
[    2.761268] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_dwc3_u2host status is okay
[    2.771194] rtk-usb-power-manager 98000000.rtk_usb_power_manager: ehci status is okay
[    2.780016] rtk-usb-power-manager 98000000.rtk_usb_power_manager: ohci status is okay
[    2.788856] rtk-usb-power-manager 98000000.rtk_usb_power_manager: rtk_dwc3_u3host status is okay
[    2.805252] rtk-usb-power-manager 98000000.rtk_usb_power_manager: create_debug_files
[    3.286100] [RTD129x PCIE Slot2] 9803b000.pcie2: PCIE device has link down in slot 2
[    3.294838] [RTD129x PCIE Slot2] 9803b000.pcie2: rtk_pcie2_hw_initial fail
[    3.518481] [RTD129x PCIE Slot1] 9804e000.pcie: PCIE device has link down in slot 1
[    3.527123] [RTD129x PCIE Slot1] 9804e000.pcie: rtk_pcie_hw_initial fail
[    3.538951] rtk119x-ir 98007000.irda: [rtk119x_ir_probe]: can't get multiple support from dtb, set to default->not support

[ROS: openRPC() intr_scpu_dev_r buf  0x00e2ffa1 s  0x00e2ffa1 e  0x00e4ffa1 i  0x00e2ffa1
[ROS: openStubRPC() intr_w buf  0x00e6ffa1 s  0x00e6ffa1 e  0x00e8ffa1 i  0x00e6ffa1[AVCPU] Set Debug level flag  0x81dfaa54 *flag  0x01deb3b0 ucache  0xa1deb3b0
[AVCPU] Set Debug level *ptrDebugFlag  0x00000001
-------------------
Audio Version = 161503 (Kylin)
Common Version = 0
Binary src compiled at Aug 11 2017 00:25:51
Note =
-------------------




[A] gloabl malloc size  0x003ffeb8
[    3.641029] AudioIntrRead:143 can't find process for handling AudioIntrRead programID:98
[    3.650269] AudioIntrRead: program:98 version:0 procedure:1 taskID:0 sysTID:4294967295 sysPID:4294967295 size:4 context:81dfa225 atomic
[    3.908062] cec_core_init, register cec_bus ffffffc0010d1cd0
[    3.914016] register cec driver 'cec' (ffffffc0010d1e50)
[    3.919528] register cec device 'cec0' (ffffffc0010d1f48) to cec0
[    3.925867] [cec_bus_match name = cec0,len=4,drv_name=cec]
[    3.931601] probe : cec_dev 'cec0' (ffffffc0010d1f48), cec_drv 'cec' (ffffffc0010d1e50)
[    3.940490] register cec device 'cec1' (ffffffc0010d21f8) to cec0
[    3.946818] [cec_bus_match name = cec1,len=4,drv_name=cec]
[    3.952682] probe : cec_dev 'cec1' (ffffffc0010d21f8), cec_drv 'cec' (ffffffc0010d1e50)
[    3.982872] reg = 0x330800
[    4.069522] [SDIO] rtk_sdhci_set_clock end real_div=1f4, div=fa, c3c=0, PLL=ae4388, CLK=fa07
[    4.089666] EMMC : emmc of_node found
[    4.093465] [rtkemmc_probe] get driving s0 : 0x1
[    4.098192] [rtkemmc_probe] get driving s0 : 0x77
[    4.103015] [rtkemmc_probe] get driving s0 : 0x77
[    4.107836] [rtkemmc_probe] get driving s0 : 0x77
[    4.112704] [rtkemmc_probe] get driving s0 : 0x33
[    4.117520] [rtkemmc_probe] get driving s2 : 0x1
[    4.119514] [SDIO] rtk_sdhci_set_clock end real_div=29c, div=14e, c3c=0, PLL=ae4388, CLK=4e47
[    4.130984] [rtkemmc_probe] get driving s2 : 0xbb
[    4.135799] [rtkemmc_probe] get driving s2 : 0xbb
[    4.140620] [rtkemmc_probe] get driving s2 : 0xbb
[    4.145435] [rtkemmc_probe] get driving s2 : 0x33
[    4.150258] [rtkemmc_probe] get tx tuning switch : 0
[    4.155340] [rtkemmc_probe] get rx tuning switch : 0
[    4.169520] [SDIO] rtk_sdhci_set_clock end real_div=3e8, div=1f4, c3c=0, PLL=ae4388, CLK=f447
[    4.213123] -->rfkill_bluetooth_init
[    4.216874] -->rfkill_bluetooth_probe
[    4.219524] [SDIO] rtk_sdhci_set_clock end real_div=7d0, div=3e8, c3c=0, PLL=ae4388, CLK=e8c7
[    4.229491] bluetooth_set_power: block=1
[    4.233582] <--rfkill_bluetooth_probe
[    4.240859] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.251569] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.265873] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.276548] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.287223] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.297928] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.308602] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.319278] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.329953] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.340627] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.351302] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.361983] mmc0: Got command interrupt 0x00010000 even though no command operation was in progress.
[    4.403310] card->mmc_avail_type = 0x00000013
[    4.407784] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: create_debug_files
[    4.715537] CL_DEV::ST 0 -> 0
[    4.911253] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[    5.110553] usb usb1-port1: port 1, status 0101, change 0000, 12 Mb/s
[    5.249517] usb 1-1: new high-speed USB device number 2 using xhci-hcd (98029000.dwc3_u2host)
[    5.391539] usb 1-1: bInterfaceClass = 9
[    5.450338] rtk-ohci 98013400.ohci: _ohci_readl [USB Workaround] fixed force to enable ohci clock
Thu Jan  1 00:00:05 UTC 1970 Starting OpenWRT init
[    6.175807] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: Connection change OK: IN device mode to connect host at cc1 (cc_status=0x1)
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[    8.584898] block: unable to load configuration (fstab: Entry not found)
[    8.591826] block: no usable configuration
ext4 etc mounted!
mount: /dev: filesystem mounted, but mount(8) failed: No such file or directory
Thu Jan  1 00:00:09 UTC 1970 Waiting 29 x 0.1 seconds for OpenWRT coldplug
Thu Jan  1 00:00:09 UTC 1970 Starting Android init
[    9.885823] init: FIXME: selinux is forced to permissive mode!!
[    9.950682] init: SELinux: Could not get canonical path /adb_keys restorecon: No such file or directory.
[   10.335014] init: Failed to read from /dev/hw_random: No such device
[   10.341807] init: could not open /dev/keychord: No such file or directory
[   10.370371] init: Failed to read from /dev/hw_random: No such device
[   10.626197] init: /recovery not specified in fstab
[   10.848013] bluetooth_set_power: block=1
[   10.855777] init: property 'ro.serialno' doesn't exist while expanding '${ro.serialno}'
[   10.864277] init: cannot expand '${ro.serialno}' while writing to '/sys/class/android_usb/android0/iSerial'
[   10.877341] init: cannot find '/system/bin/debuggerd64', disabling 'debuggerd64'
[   10.886724] init: cannot find '/system/bin/rild', disabling 'ril-daemon'
[   10.895676] init: cannot find '/system/bin/install-recovery.sh', disabling 'flash_recovery'
[   10.905906] init: cannot find '/system/bin/jpuinit', disabling '[AjVpCPuUi] Sneit tD'ebug
 level flag  0x81df5d2c *flag  0x01199288 ucache  0xa1199288
[AVCPU] Set Debug level *ptrDebugFlag  0x00000000
[   10.930037] devfreq 98050000.gpu: Couldn't update frequency transition information.
[   10.963064] adding 'Function FS Gadget'/ffffffc07cf8ed38 to config 'b'/ffffffc07add1900 --> Fail (ret=-19)
[   10.979587] configfs-gadget 98020000.dwc3_drd: failed to start g1: -19
[   10.988508] adding 'Function FS Gadget'/ffffffc07cf8ed38 to config 'b'/ffffffc07add1900 --> Ok (ret=0)
root@kylin32:/ # [   11.664865] Do not detect the SDIO card and close the clock
[   11.676593] rtk_sdmmc_get_cd: SD card exists, regCARD_EXIST = 4
[   11.847257] healthd: No charger supplies found
[   12.609656] configfs-gadget gadget: unbind function 'Function FS Gadget'/ffffffc07cf8ed38
[   12.620339] rtk-dwc3-type_c 98013200.rtk_dwc3_drd_type_c: Connection change OK: IN device mode to disconnect host at cc1 (cc_status=0x0)
[   14.679538] SD card is being inserted now...!!!
[   14.689595] rtk_sdmmc_get_cd: SD card exists, regCARD_EXIST = 4

root@kylin32:/ # [   18.793476] init: no such service 'regService'
[   18.799076] init: no such service 'regService'
[   19.592151] r8169 98016000.gmac eth0: rtl_csiar_cond == 0 (loop: 100, delay: 10).
[   19.601151] r8169 98016000.gmac eth0: rtl_csiar_cond == 1 (loop: 100, delay: 10).
[   22.792913] r8169 98016000.gmac eth0: rtl_csiar_cond == 0 (loop: 100, delay: 10).
[   22.806327] r8169 98016000.gmac eth0: rtl_csiar_cond == 1 (loop: 100, delay: 10).

root@kylin32:/ # [   26.564955] init: Warning!  Service update_hosts needs a SELinux domain defined; please fix!
[   26.574483] init: avc:  denied  { set } for property=tmp.exec_ubus scontext=u:r:system_server:s0 tcontext=u:object_r:default_prop:s0 tclass=property_service
[   26.589368] init: no such service 'sh_ubus'
mount
tmpfs / tmpfs ro,seclabel,relatime 0 0
tmpfs /dev tmpfs rw,seclabel,nosuid,relatime,mode=755 0 0
devpts /dev/pts devpts rw,seclabel,relatime,mode=600,ptmxmode=000 0 0
proc /proc proc rw,relatime 0 0
sysfs /sys sysfs rw,seclabel,relatime 0 0
tmpfs /rtk tmpfs rw,seclabel,nosuid,relatime,mode=755 0 0
selinuxfs /sys/fs/selinux selinuxfs rw,relatime 0 0
debugfs /sys/kernel/debug debugfs rw,seclabel,relatime 0 0
tracefs /sys/kernel/debug/tracing tracefs rw,relatime 0 0
none /acct cgroup rw,relatime,cpuacct 0 0
none /sys/fs/cgroup tmpfs rw,seclabel,relatime,mode=750,gid=1000 0 0
none /sys/fs/cgroup/memory cgroup rw,relatime,memory 0 0
tmpfs /mnt tmpfs rw,seclabel,relatime,mode=755,gid=1000 0 0
none /dev/memcg cgroup rw,relatime,memory 0 0
none /dev/cpuctl cgroup rw,relatime,cpu 0 0
none /dev/cpuset cgroup rw,relatime,cpuset,noprefix,release_agent=/sbin/cpuset_release_agent 0 0
tmpfs /tmp tmpfs rw,seclabel,relatime,mode=777,gid=1000 0 0
/dev/block/mmcblk0p1 /system ext4 ro,seclabel,noatime,data=ordered 0 0
/dev/block/mmcblk0p3 /cache ext4 rw,seclabel,nosuid,nodev,noatime,discard,journal_checksum,errors=continue,data=ordered 0 0
/dev/block/mmcblk0p2 /data ext4 rw,seclabel,nosuid,nodev,noatime,discard,journal_checksum,errors=continue,data=ordered 0 0
none /config configfs rw,relatime 0 0
adb /dev/usb-ffs/adb functionfs rw,relatime 0 0
tmpfs /storage tmpfs rw,seclabel,relatime,mode=755,gid=1000 0 0
/dev/fuse /mnt/runtime/default/emulated fuse rw,nosuid,nodev,noexec,noatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
/dev/fuse /storage/emulated fuse rw,nosuid,nodev,noexec,noatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
/dev/fuse /mnt/runtime/read/emulated fuse rw,nosuid,nodev,noexec,noatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
/dev/fuse /mnt/runtime/write/emulated fuse rw,nosuid,nodev,noexec,noatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
/dev/block/vold/public:179,33 /mnt/media_rw/F99C-FADA vfat rw,dirsync,nosuid,nodev,noexec,relatime,uid=1023,gid=1023,fmask=0007,dmask=0007,allow_utime=0020,codepage=437,iocharset=iso8859-1,shortname=mixed,utf8,errors=remount-ro 0 0
/dev/fuse /mnt/runtime/default/F99C-FADA fuse rw,nosuid,nodev,noexec,noatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
/dev/fuse /storage/F99C-FADA fuse rw,nosuid,nodev,noexec,noatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
/dev/fuse /mnt/runtime/read/F99C-FADA fuse rw,nosuid,nodev,noexec,noatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
/dev/fuse /mnt/runtime/write/F99C-FADA fuse rw,nosuid,nodev,noexec,noatime,user_id=1023,group_id=1023,default_permissions,allow_other 0 0
/dev/block/vold/public:179,34 /mnt/media_rw/36e2c74c-91df-4382-af59-5196714da4d4 ext4 rw,dirsync,seclabel,nosuid,nodev,noexec,noatime,data=ordered 0 0
/dev/fuse /mnt/runtime/default/36e2c74c-91df-4382-af59-5196714da4d4 fuse rw,nosuid,nodev,noexec,noatime,user_id=0,group_id=0,default_permissions,allow_other 0 0
/dev/fuse /storage/36e2c74c-91df-4382-af59-5196714da4d4 fuse rw,nosuid,nodev,noexec,noatime,user_id=0,group_id=0,default_permissions,allow_other 0 0
/dev/fuse /mnt/runtime/read/36e2c74c-91df-4382-af59-5196714da4d4 fuse rw,nosuid,nodev,noexec,noatime,user_id=0,group_id=0,default_permissions,allow_other 0 0
/dev/fuse /mnt/runtime/write/36e2c74c-91df-4382-af59-5196714da4d4 fuse rw,nosuid,nodev,noexec,noatime,user_id=0,group_id=0,default_permissions,allow_other 0 0
root@kylin32:/ #