Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- Connecting to /dev/ttyUSB1, speed 115200
- Escape character: Ctrl-\ (ASCII 28, FS): enabled
- Type the escape character followed by C to get back,
- or followed by ? to see other options.
- ----------------------------------------------------
- [ 77.560691] SysRq : Emergency Remount R/O
- [ 77.586849] ext4_msg: 2 callbacks suppressed
- [ 77.953632] Restarting system with command ''.
- [ 77.957503] Going down for restart now
- [ 77.961454] Calling SCM to disable SPMI PMI
- Format: Log Type - Time(microsec) - Message - Optional Info
- Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
- S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.2.C2-00037
- S - IMAGE_VARIANT_STRING=DAASANAZA
- S - OEM_IMAGE_VERSION_STRING=administrator-p
- S - Boot Config, 0x000000e1
- B - 1566 - PBL, Start
- B - 4542 - bootable_media_detect_entry, Start
- B - 102516 - bootable_media_detect_success, Start
- B - 102520 - elf_loader_entry, Start
- B - 103132 - auth_hash_seg_entry, Start
- B - 103393 - auth_hash_seg_exit, Start
- B - 117725 - elf_segs_hash_verify_entry, Start
- B - 176836 - PBL, End
- B - 189618 - SBL1, Start
- B - 247995 - boot_flash_init, Start
- D - 30 - boot_flash_init, Delta
- B - 254644 - boot_config_data_table_init, Start
- D - 6954 - boot_config_data_table_init, Delta - (0 Bytes)
- B - 266204 - CDT version:3,Platform ID:8,Major ID:1,Minor ID:0,Subtype:0
- B - 272365 - pm_device_init, Start
- B - 275689 - pm_device_init, TEST - MSM8909 detected
- B - 281088 - pm_device_init, INFO - PM8909 is selected
- B - 295453 - PM_SET_VAL:Skip
- D - 21441 - pm_device_init, Delta
- B - 296856 - sbl1_ddr_set_params, Start
- B - 299235 - cpr_init, Start
- D - 0 - cpr_init, Delta
- B - 304878 - Pre_DDR_clock_init, Start
- D - 213 - Pre_DDR_clock_init, Delta
- D - 0 - sbl1_ddr_set_params, Delta
- B - 317871 - pm_driver_init, Start
- B - 324520 - --> Charge init
- B - 3857 - battery voltage
- B - 327997 - boot up
- B - 10 - Current status
- D - 10644 - pm_driver_init, Delta
- B - 340349 - clock_init, Start
- D - 152 - clock_init, Delta
- B - 341295 - Image Load, Start
- D - 27114 - QSEE Image Loaded, Delta - (490096 Bytes)
- B - 368440 - Image Load, Start
- D - 274 - SEC Image Loaded, Delta - (2048 Bytes)
- B - 376705 - sbl1_efs_handle_cookies, Start
- D - 671 - sbl1_efs_handle_cookies, Delta
- B - 383507 - Image Load, Start
- D - 13664 - RPM Image Loaded, Delta - (156564 Bytes)
- B - 397171 - Image Load, Start
- D - 18910 - APPSBL Image Loaded, Delta - (499052 Bytes)
- B - 416111 - QSEE Execution, Start
- D - 274 - QSEE Execution, Delta
- B - 421876 - SBL1, End
- D - 234515 - SBL1, Delta
- S - Throughput, 31000 KB/s (1147760 Bytes, 36320 us)
- S - DDR Frequency, 400 MHz
- Android Bootloader - UART_DM Initialized!!!
- [0] [0] welcome to lk
- [10] [10] platform_init()
- [10] [10] target_init()
- [50] [50] SDHC Running in HS200 mode
- [60] [60] Done initialization of the card
- [70] [70] pm8x41_get_is_cold_boot: cold boot
- [80] [80] Waiting for the RPM to populate smd channel table
- [80] [80] Not able to search the panel:
- [140] [140] Config MIPI_VIDEO_PANEL.
- [300] [300] Panic Lut0 0 Lut1 fff Robest 0
- [300] [300] ERROR: Splash image header invalid
- [330] [330] Turn on MIPI_VIDEO_PANEL.
- [350] [350] Video lane tested successfully
- CTRL+C: enter instruction mode
- CTRL+C: out instruction mode
- input FCT : enter instruction mode
- [1440] [1440] is_enter_fctmode ch: out fct instruction mode
- [1450] [1450] Recovery command: 32 normal1
- [1450] [1450] Unable to locate /bootselect partition
- [1460] [1460] boot_verifier: Device is in ORANGE boot state.
- [1460] [1460] Device is unlocked! Skipping verification...
- [1470] [1470] Loading boot image (16896000): start
- [1580] [1580] Loading boot image (16896000): done
- [1580] [1580] use_signed_kernel=1, is_unlocked=1, is_tampered=0.
- [1610] [1610] Best match DTB tags 245/00000008/0x00000000/0/1000d/0/0/0/90a3f82c/2822e
- [1620] [1620] Using pmic info 0x1000d/0x0/0x0/0x0 for device 0x1010d/0x0/0x0/0x0
- [1620] [1620] cmdline: console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 earlyprintk buildvariant=userdebug androidboot.bootdevice=782490[1650] [1650] Updating device tree: start
- [1660] [1660] Updating device tree: done
- [1670] [1670] Channel alloc freed
- [1680] [1680] Turn off MIPI_VIDEO_PANEL.
- [1680] [1680] Continuous splash enabled, keeping panel alive.
- [1680] [1680] booting linux @ 0x80008000, ramdisk @ 0x82000000 (1350266), tags/device tree @ 0x81e00000
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Initializing cgroup subsys cpuacct
- [ 0.000000] Linux version 3.10.49-gc25540a-00010-gca92795-dirty (BspDeveloper2@BspDeveloper2) (gcc version 4.8 (GCC) ) #7 SMP PREEMPT Tue Sep 24 11:24:12 IST 2019
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: Qualcomm Technologies, Inc. MSM 8909 (Flattened Device Tree), model: Qualcomm Technologies, Inc. MSM8909-PM8909 1GB MTP
- [ 0.000000] cma: Found external_image__region@0, memory base 0x87a00000, size 6 MiB, limit 0xffffffff
- [ 0.000000] cma: Found modem_adsp_region@0, memory base 0x88000000, size 85 MiB, limit 0xffffffff
- [ 0.000000] cma: Found pheripheral_region@0, memory base 0x8d500000, size 7 MiB, limit 0xffffffff
- [ 0.000000] cma: Found venus_qseecom_region@0, memory base 0x00000000, size 6 MiB, limit 0x90000000
- [ 0.000000] cma: Found audio_region@0, memory base 0x00000000, size 3 MiB, limit 0xffffffff
- [ 0.000000] cma: Found splash_region@83000000, memory base 0x83000000, size 12 MiB, limit 0xffffffff
- [ 0.000000] cma: CMA: reserved 6 MiB at 0x87a00000 for external_image_mem
- [ 0.000000] cma: CMA: reserved 85 MiB at 0x88000000 for modem_adsp_mem
- [ 0.000000] cma: CMA: reserved 7 MiB at 0x8d500000 for peripheral_mem
- [ 0.000000] cma: CMA: reserved 8 MiB at 0x8f800000 for venus_qseecom_mem
- [ 0.000000] cma: CMA: reserved 4 MiB at 0xff800000 for audio_mem
- [ 0.000000] cma: CMA: reserved 12 MiB at 0x83000000 for cont_splash_mem
- [ 0.000000] cma: CMA: reserved 8 MiB at 0xaf000000 for default region
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] PERCPU: Embedded 14 pages/cpu @c6c54000 s33472 r8192 d15680 u57344
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 494639
- [ 0.000000] Kernel command line: sched_enable_hmp=1 console=ttyHSL0,115200,n8 androidboot.console=ttyHSL0 androidboot.hardware=qcom msm_rtb.filter=0x237 ehci-hcd.park=3 androidboot.bootdevice=7824900.sdhci lpm_levels.sleep_disabled=1 earlyprintk buildvariant=userdebug androidboot.bootdevice=7824900.sdhci androidboot.serialno=3122bcdb androidboot.baseband=msm mdss_mdp3.panel=1:dsi:0:qcom,mdss_dsi_ili9881c_720p_video:1:none
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 1893768K/1996796K available (10541K kernel code, 1078K rwdata, 4600K rodata, 1420K init, 1349K bss, 103028K reserved, 1314812K highmem)
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc0fc96f4 (16134 kB)
- [ 0.000000] .init : 0xc1000000 - 0xc11632c0 (1421 kB)
- [ 0.000000] .data : 0xc1164000 - 0xc127199c (1079 kB)
- [ 0.000000] .bss : 0xc1271a60 - 0xc13c2fe4 (1350 kB)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] HMP scheduling enabled.
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000] Architected cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
- [ 0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696213963ns
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] kmemleak: Kernel memory leak detector disabled
- [ 0.000837] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
- [ 0.000855] pid_max: default: 32768 minimum: 301
- [ 0.001220] Security Framework initialized
- [ 0.001263] SELinux: Initializing.
- [ 0.001545] Mount-cache hash table entries: 512
- [ 0.003224] Initializing cgroup subsys debug
- [ 0.003244] Initializing cgroup subsys freezer
- [ 0.003297] CPU: Testing write buffer coherency: ok
- [ 0.004147] /cpus/cpu@0 missing clock-frequency property
- [ 0.004169] /cpus/cpu@1 missing clock-frequency property
- [ 0.004188] /cpus/cpu@2 missing clock-frequency property
- [ 0.004208] /cpus/cpu@3 missing clock-frequency property
- [ 0.004224] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.004381] Setting up static identity map for 0xc0ab10f8 - 0xc0ab1150
- [ 0.006448] ftrace: Allocated trace_printk buffers
- [ 0.031274] MSM Memory Dump base table set up
- [ 0.031362] MSM Memory Dump apps data table set up
- [ 0.031408] Configuring XPU violations to be fatal errors
- [ 0.041318] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.051339] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.061038] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.061340] Brought up 4 CPUs
- [ 0.061373] SMP: Total of 4 processors activated (153.60 BogoMIPS).
- [ 0.061382] CPU: All CPU(s) started in SVC mode.
- [ 0.083228] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- [ 0.083263] ------------[ cut here ]------------
- [ 0.083289] WARNING: at /home/nvme/sc20/kernel/fs/proc/generic.c:102 __xlate_proc_name+0xa0/0xb4()
- [ 0.083299] name 'cpu/vfp_bounce'
- [ 0.083308] Modules linked in:
- [ 0.083326] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.49-gc25540a-00010-gca92795-dirty #7
- [ 0.083357] [<c010be54>] (unwind_backtrace+0x0/0x11c) from [<c0109a04>] (show_stack+0x10/0x14)
- [ 0.083386] [<c0109a04>] (show_stack+0x10/0x14) from [<c0121784>] (warn_slowpath_common+0x4c/0x6c)
- [ 0.083411] [<c0121784>] (warn_slowpath_common+0x4c/0x6c) from [<c01217d0>] (warn_slowpath_fmt+0x2c/0x3c)
- [ 0.083436] [<c01217d0>] (warn_slowpath_fmt+0x2c/0x3c) from [<c024ba0c>] (__xlate_proc_name+0xa0/0xb4)
- [ 0.083458] [<c024ba0c>] (__xlate_proc_name+0xa0/0xb4) from [<c024ba6c>] (__proc_create+0x4c/0xf4)
- [ 0.083481] [<c024ba6c>] (__proc_create+0x4c/0xf4) from [<c024be50>] (proc_create_data+0x58/0x98)
- [ 0.083507] [<c024be50>] (proc_create_data+0x58/0x98) from [<c1002e34>] (vfp_init+0x16c/0x1d8)
- [ 0.083531] [<c1002e34>] (vfp_init+0x16c/0x1d8) from [<c0100670>] (do_one_initcall+0xb8/0x160)
- [ 0.083555] [<c0100670>] (do_one_initcall+0xb8/0x160) from [<c1000be4>] (kernel_init_freeable+0x10c/0x1d0)
- [ 0.083580] [<c1000be4>] (kernel_init_freeable+0x10c/0x1d0) from [<c0a96fa8>] (kernel_init+0x8/0xe4)
- [ 0.083603] [<c0a96fa8>] (kernel_init+0x8/0xe4) from [<c0105ff8>] (ret_from_fork+0x14/0x3c)
- [ 0.083652] ---[ end trace da227214a82491b7 ]---
- [ 0.083662] Failed to create procfs node for VFP bounce reporting
- [ 0.087153] pinctrl core: initialized pinctrl subsystem
- [ 0.087761] regulator-dummy: no parameters
- [ 0.103506] NET: Registered protocol family 16
- [ 0.117954] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.181768] spmi_pmic_arb 200f000.qcom,spmi: PMIC Arb Version-2 0x20010000
- [ 0.190749] msm_watchdog b017000.qcom,wdt: wdog absent resource not present
- [ 0.191152] msm_watchdog b017000.qcom,wdt: MSM Watchdog Initialized
- [ 0.193619] cma: Assigned CMA region at 0 to 1de0000.qcom,venus device
- [ 0.198342] cma: Assigned CMA region at 0 to a21b000.qcom,pronto device
- [ 0.198717] cma: Assigned CMA region at 0 to 4080000.qcom,mss device
- [ 0.212340] KPI: Bootloader start count = 16217
- [ 0.212356] KPI: Bootloader end count = 71835
- [ 0.212366] KPI: Bootloader display count = 27360
- [ 0.212375] KPI: Bootloader load kernel count = 3563
- [ 0.212385] KPI: Kernel MPM timestamp = 168190
- [ 0.212394] KPI: Kernel MPM Clock frequency = 32768
- [ 0.212426] socinfo_print: v10, id=245, ver=2.0, raw_id=2400, raw_ver=1, hw_plat=8, hw_plat_ver=65536
- [ 0.212426] accessory_chip=0, hw_plat_subtype=0, pmic_model=65549, pmic_die_revision=65537 foundry_id=1 serial_number=270169395
- [ 0.214610] smd_channel_probe_worker: allocation table not initialized
- [ 0.214634] smd_channel_probe_worker: allocation table not initialized
- [ 0.221710] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.221726] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.222358] msm_mpm_dev_probe(): Cannot get clk resource for XO
- [ 0.222392] platform 601d0.qcom,mpm: Driver mpm-v2 requests probe deferral
- [ 0.222956] msm-jtag-fuse 5e01c.jtagfuse: JTag Fuse initialized
- [ 0.225074] pm8909_s1_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.225946] pm8909_s1_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- [ 0.226786] pm8909_s1_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.227594] pm8909_s1_corner_so: 0 <--> 0 mV at 0 mV normal idle
- [ 0.228411] pm8909_s2: 1850 mV normal idle
- [ 0.229232] pm8909_l1: 1000 mV normal idle
- [ 0.230065] pm8909_l2: 1200 mV normal idle
- [ 0.230953] pm8909_l3: 500 <--> 1350 mV at 0 mV normal idle
- [ 0.231728] pm8909_l3_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- [ 0.232469] pm8909_l3_corner_so: 0 <--> 0 mV at 0 mV normal idle
- [ 0.233254] pm8909_l4: 1800 mV normal idle
- [ 0.234116] pm8909_l5: 1800 mV normal idle
- [ 0.235013] pm8909_l6: 1800 mV normal idle
- [ 0.235819] pm8909_l7: 1800 mV normal idle
- [ 0.236578] pm8909_l7_ao: 1800 mV normal idle
- [ 0.237380] pm8909_l7_so: 1800 mV normal idle
- [ 0.238220] pm8909_l8: 2850 <--> 2900 mV at 2850 mV normal idle
- [ 0.239008] pm8909_l9: 3000 <--> 3300 mV at 3000 mV normal idle
- [ 0.239891] pm8909_l10: 1225 <--> 1300 mV at 1225 mV normal idle
- [ 0.240855] pm8909_l11: 1800 <--> 2950 mV at 1800 mV normal idle
- [ 0.241656] pm8909_l12: 1800 <--> 2950 mV at 1800 mV normal idle
- [ 0.242503] pm8909_l13: 3075 mV normal idle
- [ 0.243321] pm8909_l14: 1800 <--> 3000 mV at 1800 mV normal idle
- [ 0.244226] pm8909_l15: 1800 <--> 3000 mV at 1800 mV normal idle
- [ 0.244995] pm8909_l17: 2800 <--> 2850 mV at 2800 mV normal idle
- [ 0.245845] pm8909_l18: 2700 mV normal idle
- [ 0.247789] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
- [ 0.247892] i2c-msm-v2 78b6000.i2c: error on clk_get(core_clk):-517
- [ 0.247912] i2c-msm-v2 78b6000.i2c: error probe() failed with err:-517
- [ 0.247954] platform 78b6000.i2c: Driver i2c-msm-v2 requests probe deferral
- [ 0.248226] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
- [ 0.248299] i2c-msm-v2 78b8000.i2c: error on clk_get(core_clk):-517
- [ 0.248317] i2c-msm-v2 78b8000.i2c: error probe() failed with err:-517
- [ 0.248348] platform 78b8000.i2c: Driver i2c-msm-v2 requests probe deferral
- [ 0.248604] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
- [ 0.248674] i2c-msm-v2 78b9000.i2c: error on clk_get(core_clk):-517
- [ 0.248691] i2c-msm-v2 78b9000.i2c: error probe() failed with err:-517
- [ 0.248722] platform 78b9000.i2c: Driver i2c-msm-v2 requests probe deferral
- [ 0.248971] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
- [ 0.249042] i2c-msm-v2 78b7000.i2c: error on clk_get(core_clk):-517
- [ 0.249060] i2c-msm-v2 78b7000.i2c: error probe() failed with err:-517
- [ 0.249090] platform 78b7000.i2c: Driver i2c-msm-v2 requests probe deferral
- [ 0.249335] i2c-msm-v2 78b5000.i2c: probing driver i2c-msm-v2
- [ 0.249405] i2c-msm-v2 78b5000.i2c: error on clk_get(core_clk):-517
- [ 0.249422] i2c-msm-v2 78b5000.i2c: error probe() failed with err:-517
- [ 0.249453] platform 78b5000.i2c: Driver i2c-msm-v2 requests probe deferral
- [ 0.254743] sps:sps is ready.
- [ 0.266905] qcom,rpmcc-8909 1800000.qcom,rpmcc: Registered RPM clocks.
- [ 0.287128] qcom,gcc-8909 1800000.qcom,gcc: Registered GCC clocks
- [ 0.288353] clock-a7 b011050.qcom,clock-a7: Speed bin: 2 PVS Version: 0
- [ 0.290693] i2c-msm-v2 78b6000.i2c: probing driver i2c-msm-v2
- [ 0.290909] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.290929] i2c-msm-v2 78b6000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.291503] i2c i2c-2: of_i2c: modalias failure on /soc/i2c@78b6000/nq@28
- [ 0.291897] i2c-msm-v2 78b8000.i2c: probing driver i2c-msm-v2
- [ 0.291993] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.292010] i2c-msm-v2 78b8000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.292786] i2c-msm-v2 78b9000.i2c: probing driver i2c-msm-v2
- [ 0.292875] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.292892] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.294301] kworker/u8:2 (51) used greatest stack depth: 6892 bytes left
- [ 0.294456] kworker/u8:2 (50) used greatest stack depth: 6676 bytes left
- [ 0.295734] i2c-msm-v2 78b7000.i2c: probing driver i2c-msm-v2
- [ 0.295839] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.295856] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.299325] i2c-msm-v2 78b5000.i2c: probing driver i2c-msm-v2
- [ 0.299525] AXI: msm_bus_scale_register_client(): msm_bus_scale_register_client: Bus driver not ready.
- [ 0.299543] i2c-msm-v2 78b5000.i2c: msm_bus_scale_register_client(mstr-id:86):0 (not a problem)
- [ 0.351569] bio: create slab <bio-0> at 0
- [ 0.354014] spk_vreg: no parameters
- [ 0.354862] oem_otg_ext_vreg: no parameters
- [ 0.356607] SCSI subsystem initialized
- [ 0.357493] usbcore: registered new interface driver usbfs
- [ 0.357647] usbcore: registered new interface driver hub
- [ 0.357913] usbcore: registered new device driver usb
- [ 0.358091] media: Linux media interface: v0.10
- [ 0.358166] Linux video capture interface: v2.00
- [ 0.358462] BATTERY: batterydata_init: Battery-data device created!
- [ 0.360117] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
- [ 0.360386] cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device
- [ 0.360621] cma: Assigned CMA region at 0 to 1a.qcom,ion-heap device
- [ 0.361082] ION heap system created
- [ 0.361316] ION heap qsecom created at 0x8f800000 with size 600000
- [ 0.361344] ION heap audio created at 0xff800000 with size 314000
- [ 0.361367] ION heap pil_2 created at 0x88000000 with size 5500000
- [ 0.361850] msm_bus_fabric_init_driver
- [ 0.362138] msm_bus_device 580000.ad-hoc-bus: Dev 0
- [ 0.362162] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 0.362337] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
- [ 0.362372] msm_bus_device 580000.ad-hoc-bus: Dev 4096
- [ 0.362392] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
- [ 0.362404] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 0.362601] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
- [ 0.362638] msm_bus_device 580000.ad-hoc-bus: Dev 1024
- [ 0.362657] msm_bus_device 580000.ad-hoc-bus: Util-fact is missing, default to 100
- [ 0.362669] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 0.362826] msm_bus_device 580000.ad-hoc-bus: msmbus_coresight initialized
- [ 0.362882] msm_bus_device 580000.ad-hoc-bus: Dev 2048
- [ 0.362903] msm_bus_device 580000.ad-hoc-bus: Vrail-comp is missing, default to 100
- [ 0.362942] msm_bus_device 580000.ad-hoc-bus: Coresight support absent for bus: 2048
- [ 0.365768] msm_bus_init_clk: Valid node clk node 0 ctx 0
- [ 0.365777] msm_bus_init_clk: Valid node clk node 0 ctx 1msm_bus_init_clk: Valid node clk node 4096 ctx 0
- [ 0.365915] msm_bus_init_clk: Valid node clk node 4096 ctx 1msm_bus_init_clk: Valid node clk node 1024 ctx 0
- [ 0.366042] msm_bus_init_clk: Valid node clk node 1024 ctx 1msm_bus_init_clk: Valid Iface clk node 1024
- [ 0.366137] msm_bus_init_clk: Valid node clk node 2048 ctx 0msm_bus_init_clk: Valid node clk node 2048 ctx 1
- [ 0.380659] gdsc_venus: no parameters
- [ 0.381178] gdsc_mdss: no parameters
- [ 0.381649] gdsc_vfe: no parameters
- [ 0.382118] gdsc_oxili_gx: no parameters
- [ 0.382472] gdsc_venus_core0: fast normal
- [ 0.383529] mdss_pll_probe: MDSS pll label = MDSS DSI 0 PLL
- [ 0.384768] dsi_pll_clock_register_lpm: Registered DSI PLL clocks successfully
- [ 0.385816] msm_iommu 1f00000.qcom,iommu: device gfx_iommu (model: 500) mapped at f0320000, with 2 ctx banks
- [ 0.386717] msm_iommu 1e00000.qcom,iommu: device apps_iommu (model: 500) mapped at f0380000, with 22 ctx banks
- [ 0.393703] msm_iommu_ctx 1f09000.qcom,iommu-ctx: context gfx3d_user using bank 1
- [ 0.393900] msm_iommu_ctx 1f0a000.qcom,iommu-ctx: context gfx3d_priv using bank 2
- [ 0.394117] msm_iommu_ctx 1e22000.qcom,iommu-ctx: context MSA0_Audio using bank 2
- [ 0.394305] msm_iommu_ctx 1e23000.qcom,iommu-ctx: context vfe using bank 3
- [ 0.394489] msm_iommu_ctx 1e24000.qcom,iommu-ctx: context mdp_0 using bank 4
- [ 0.394676] msm_iommu_ctx 1e25000.qcom,iommu-ctx: context venus_ns using bank 5
- [ 0.394860] msm_iommu_ctx 1e27000.qcom,iommu-ctx: context mDSP using bank 7
- [ 0.395072] msm_iommu_ctx 1e28000.qcom,iommu-ctx: context gss using bank 8
- [ 0.395261] msm_iommu_ctx 1e29000.qcom,iommu-ctx: context a2 using bank 9
- [ 0.395514] msm_iommu_ctx 1e32000.qcom,iommu-ctx: context mdp_1 using bank 18
- [ 0.395783] msm_iommu_ctx 1e33000.qcom,iommu-ctx: context venus_sec_pixel using bank 19
- [ 0.395972] msm_iommu_ctx 1e34000.qcom,iommu-ctx: context venus_sec_bitstream using bank 20
- [ 0.396161] msm_iommu_ctx 1e35000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 21
- [ 0.396417] msm_iommu_ctx 1e36000.qcom,iommu-ctx: context venus_fw using bank 22
- [ 0.396612] msm_iommu_ctx 1e37000.qcom,iommu-ctx: context periph_rpm using bank 23
- [ 0.396863] msm_iommu_ctx 1e38000.qcom,iommu-ctx: context periph_CE using bank 24
- [ 0.397051] msm_iommu_ctx 1e39000.qcom,iommu-ctx: context periph_BLSP using bank 25
- [ 0.397235] msm_iommu_ctx 1e3a000.qcom,iommu-ctx: context periph_SDC1 using bank 26
- [ 0.397442] msm_iommu_ctx 1e3b000.qcom,iommu-ctx: context periph_SDC2 using bank 27
- [ 0.397625] msm_iommu_ctx 1e3c000.qcom,iommu-ctx: context periph_audio using bank 28
- [ 0.397809] msm_iommu_ctx 1e3d000.qcom,iommu-ctx: context periph_USB_HS1 using bank 29
- [ 0.397988] msm_iommu_ctx 1e2a000.qcom,iommu-ctx: context qpic using bank 10
- [ 0.398172] msm_iommu_ctx 1e31000.qcom,iommu-ctx: context wlan using bank 17
- [ 0.398386] msm_iommu_ctx 1e3f000.qcom,iommu-ctx: context periph_CE_secure using bank 31
- [ 0.400139] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.401084] Bluetooth: ee855f10
- [ 0.401148] NET: Registered protocol family 31
- [ 0.401157] Bluetooth: ee855f10
- [ 0.401175] Bluetooth: ee855f08Bluetooth: ee855ef8
- [ 0.401300] Bluetooth: ee855f00[ 0.401761] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.401800] cfg80211: World regulatory domain updated:
- [ 0.401808] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
- [ 0.401818] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 0.401827] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
- [ 0.401836] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
- [ 0.401845] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 0.401854] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 0.401863] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 0.401872] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
- [ 0.401881] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
- [ 0.402928] Switching to clocksource arch_sys_counter
- [ 0.468029] NET: Registered protocol family 2
- [ 0.468994] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
- [ 0.469574] TCP bind hash table entries: 8192 (order: 5, 163840 bytes)
- [ 0.469750] TCP: Hash tables configured (established 8192 bind 8192)
- [ 0.469940] TCP: reno registered
- [ 0.470027] UDP hash table entries: 512 (order: 2, 24576 bytes)
- [ 0.470130] UDP-Lite hash table entries: 512 (order: 2, 24576 bytes)
- [ 0.470563] NET: Registered protocol family 1
- [ 0.471569] gcc-mdss-8909 qcom,gcc-mdss.31: Registered GCC MDSS clocks.
- [ 0.472317] Trying to unpack rootfs image as initramfs...
- [ 0.564899] Freeing initrd memory: 1316K (c2000000 - c2149000)
- [ 0.567921] hw perfevents: enabled with ARMv7 Cortex-A7 PMU driver, 5 counters available
- [ 0.572250] Initialise module verification
- [ 0.572318] audit: initializing netlink socket (disabled)
- [ 0.572364] type=2000 audit(0.559:1): initialized
- [ 0.793503] bounce pool size: 64 pages
- [ 0.804740] fuse init (API version 7.23)
- [ 0.810205] Key type asymmetric registered
- [ 0.810219] Asymmetric key parser 'x509' registered
- [ 0.810490] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 249)
- [ 0.810501] io scheduler noop registered
- [ 0.810509] io scheduler deadline registered
- [ 0.810541] io scheduler row registered
- [ 0.810809] io scheduler cfq registered (default)
- [ 0.814987] platform qcom,smp2pgpio-ssr-smp2p-4-in.14: Driver smp2pgpio requests probe deferral
- [ 0.815249] platform qcom,smp2pgpio-ssr-smp2p-4-out.15: Driver smp2pgpio requests probe deferral
- [ 0.815506] platform qcom,smp2pgpio-ssr-smp2p-1-in.16: Driver smp2pgpio requests probe deferral
- [ 0.815764] platform qcom,smp2pgpio-ssr-smp2p-1-out.17: Driver smp2pgpio requests probe deferral
- [ 0.819564] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- [ 0.819940] mdss_dsi_panel_init: Panel Name = ili9881c 720p video mode dsi panel
- [ 0.820357] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-post-panel-on-command
- [ 0.820381] mdss_dsi_parse_dcs_cmds: failed, key=qcom,mdss-dsi-panel-status-command
- [ 0.820422] mdss_dsi_parse_panel_features: ulps feature disabled
- [ 0.820437] mdss_dsi_parse_panel_features: ulps during suspend feature disabled
- [ 0.820449] mdss_dsi_parse_panel_features: dynamic switch feature enabled: 0
- [ 0.820475] mdss_dsi_parse_panel_features:1207, Disp_en gpio not specified
- [ 0.820496] mdss_dsi_panel_init: Continuous splash enabled
- [ 0.820986] dsi_panel_device_register:1875, TE gpio not specified
- [ 0.821004] dsi_panel_device_register: bklt_en gpio not specified
- [ 0.821135] mdss_dsi_pll_1_clk_init: can't find vco_clk. rc=-517
- [ 0.821142] PLL 1 Clock's did not register
- [ 0.821172] mdss_dsi_retrieve_ctrl_resources: ctrl_base=f00fc000 ctrl_size=25c phy_base=f00fe500 phy_size=2b0
- [ 0.821185] dsi_panel_device_register: Using default BTA for ESD check
- [ 0.834001] mdss_register_panel: adding framebuffer device 1ac8000.qcom,mdss_dsi
- [ 0.836262] mdss_dsi_status_init: DSI status check interval:5000
- [ 0.837762] mdp3_alloc: allocating 12582912 bytes at c3000000 (83000000 phys) for fb 0
- [ 0.838203] mdss_fb_register: FrameBuffer[0] 720x1280 registered successfully!
- [ 0.838213] mdp3_ctrl_init: mdp3_ctrl_init
- [ 0.838331] mdp3 1a00000.qcom,mdss_mdp: Unbalanced pm_runtime_enable!
- [ 0.841240] IPC_RTR: msm_ipc_router_smd_driver_register Already driver registered IPCRTR
- [ 0.843783] msm_rpm_log_probe: OK
- [ 0.848039] NET: Registered protocol family 27
- [ 0.853302] In memshare_probe, Memshare probe success
- [ 0.855617] subsys-pil-tz a21b000.qcom,pronto: [wcnss]: Error getting proxy unvoting gpio
- [ 0.855649] platform a21b000.qcom,pronto: Driver subsys-pil-tz requests probe deferral
- [ 0.857657] pil-q6v5-mss 4080000.qcom,mss: [modem]: Error getting proxy unvoting gpio
- [ 0.857869] platform 4080000.qcom,mss: Driver pil-q6v5-mss requests probe deferral
- [ 0.859347] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
- [ 0.859390] AXI: get_pdata(): Error: Client name not found
- [ 0.859399] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
- [ 0.859406] msm_serial_hsl_probe: Bus scaling is disabled
- [ 0.859513] 78af000.serial: ttyHSL0 at MMIO 0x78af000 (irq = 139) is a MSM
- [ 0.859574] msm_hsl_console_setup: console setup on port #0
- [ 3.035706] console [ttyHSL0] enabled
- [ 3.039684] msm_serial_hsl_probe: detected port #1 (ttyHSL1)
- [ 3.045006] AXI: get_pdata(): Error: Client name not found
- [ 3.050392] AXI: msm_bus_cl_get_pdata(): client has to provide missing entry for successful registration
- [ 3.059890] msm_serial_hsl_probe: Bus scaling is disabled
- [ 3.065372] 78b0000.serial: ttyHSL1 at MMIO 0x78b0000 (irq = 140) is a MSM
- [ 3.072627] msm_serial_hsl_init: driver initialized
- [ 3.091225] kgsl kgsl-3d0: Initialized kgsl-3d0: mmu=on
- [ 3.109115] brd: module loaded
- [ 3.115512] loop: module loaded
- [ 3.118455] apds993x 1-0039: Unable to read cross_talk use default 100
- [ 3.263378] i2c-msm-v2 78b5000.i2c: msm_bus_scale_register_client(mstr-id:86):0x5 (ok)
- [ 3.271025] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x39 MSTR_STS:0x011363c8 OPER:0x00000010
- [ 3.286036] apds993x 1-0039: Neither APDS993x nor APDS990x
- [ 3.291434] apds993x 1-0039: Not a valid chip ID
- [ 3.296889] QSEECOM: qseecom_probe: qseecom.qsee_version = 0x405000
- [ 3.302324] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
- [ 3.308037] QSEECOM: qseecom_probe: Device does not support PFEQSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
- [ 3.317910] QSEECOM: qseecom_probe: qseecom.appsbl_qseecom_support = 0x0[ 3.324627] QSEECOM: qseecom_probe: qseecom clocks handled by other subsystem
- [ 3.331830] QSEECOM: qseecom_probe: secure app region addr=0x87a00000 size=0x200000
- [ 3.341743] i2c-core: driver [tabla-i2c-core] using legacy suspend method
- [ 3.347714] i2c-core: driver [tabla-i2c-core] using legacy resume method
- [ 3.354558] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
- [ 3.361285] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
- [ 3.368387] i2c-core: driver [tasha-i2c-core] using legacy suspend method
- [ 3.374998] i2c-core: driver [tasha-i2c-core] using legacy resume method
- [ 3.382634] SCSI Media Changer driver v0.25
- [ 3.389516] tun: Universal TUN/TAP device driver, 1.6
- [ 3.393636] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 3.402754] PPP generic driver version 2.4.2
- [ 3.406203] PPP BSD Compression module registered
- [ 3.410669] PPP Deflate Compression module registered
- [ 3.415760] PPP MPPE Compression module registered
- [ 3.420478] NET: Registered protocol family 24
- [ 3.426042] wcnss_wlan probed in built-in mode
- [ 3.433590] usbcore: registered new interface driver asix
- [ 3.438025] usbcore: registered new interface driver ax88179_178a
- [ 3.444147] usbcore: registered new interface driver cdc_ether
- [ 3.449892] usbcore: registered new interface driver net1080
- [ 3.455582] usbcore: registered new interface driver cdc_subset
- [ 3.461435] usbcore: registered new interface driver zaurus
- [ 3.467375] usbcore: registered new interface driver cdc_ncm
- [ 3.473360] msm_sharedmem: sharedmem_register_qmi: qmi init successful
- [ 3.479668] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rmtfs'
- [ 3.486825] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_dsp'
- [ 3.494505] msm_sharedmem: msm_sharedmem_probe: Device created for client 'rfsa_mdm'
- [ 3.502652] msm_otg 78d9000.usb: msm_otg probe
- [ 3.510570] msm_otg 78d9000.usb: OTG regs = f01f4000
- [ 3.517450] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.522937] ehci-msm: Qualcomm On-Chip EHCI Host Controller
- [ 3.529225] ehci-msm2: Qualcomm EHCI Host Controller
- [ 3.534093] usbcore: registered new interface driver cdc_acm
- [ 3.539082] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 3.547196] usbcore: registered new interface driver ccid_bridge
- [ 3.553287] ccid_bridge_init: success
- [ 3.556779] usbcore: registered new interface driver usb-storage
- [ 3.562734] usbcore: registered new interface driver ums-alauda
- [ 3.568686] usbcore: registered new interface driver ums-cypress
- [ 3.574665] usbcore: registered new interface driver ums-datafab
- [ 3.580643] usbcore: registered new interface driver ums-freecom
- [ 3.586650] usbcore: registered new interface driver ums-isd200
- [ 3.592533] usbcore: registered new interface driver ums-jumpshot
- [ 3.598628] usbcore: registered new interface driver ums-karma
- [ 3.604439] usbcore: registered new interface driver ums-onetouch
- [ 3.610479] usbcore: registered new interface driver ums-sddr09
- [ 3.616422] usbcore: registered new interface driver ums-sddr55
- [ 3.622283] usbcore: registered new interface driver ums-usbat
- [ 3.628310] usbcore: registered new interface driver usbserial
- [ 3.633962] usbcore: registered new interface driver qc_csvt
- [ 3.639582] usbserial: USB Serial support registered for qc_csvt
- [ 3.645603] usbcore: registered new interface driver usb_ehset_test
- [ 3.654061] msm_otg 78d9000.usb: phy_reset: success
- [ 3.654611] mousedev: PS/2 mouse device common for all mice
- [ 3.654824] usbcore: registered new interface driver xpad
- [ 3.656515] Goodix-TS 5-005d: Regulator get failed avdd ret=-19
- [ 3.656527] Goodix-TS 5-005d: Regulator get failed vdd ret=-19
- [ 3.657384] Goodix-TS 5-005d: Can not lookup pmx_ts_release pinstate -19
- [ 3.773383] i2c-msm-v2 78b9000.i2c: msm_bus_scale_register_client(mstr-id:86):0x8 (ok)
- [ 3.780705] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000090
- [ 3.796394] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000090
- [ 3.811885] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000090
- [ 3.827593] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000090
- [ 3.843358] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:4) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000090
- [ 3.858864] Goodix-TS 5-005d: init external watchdog failed!
- [ 3.864656] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 3.880219] Goodix-TS 5-005d: I2C retry: 1
- [ 3.884443] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 3.900011] Goodix-TS 5-005d: I2C retry: 2
- [ 3.904233] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 3.919801] Goodix-TS 5-005d: I2C retry: 3
- [ 3.924025] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 3.939594] Goodix-TS 5-005d: I2C retry: 4
- [ 3.943818] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 3.959385] Goodix-TS 5-005d: I2C retry: 5
- [ 3.963454] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
- [ 3.969409] Goodix-TS 5-005d: GTP i2c test failed time 4.
- [ 4.003196] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.017929] Goodix-TS 5-005d: I2C retry: 1
- [ 4.022118] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.037756] Goodix-TS 5-005d: I2C retry: 2
- [ 4.041909] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.057512] Goodix-TS 5-005d: I2C retry: 3
- [ 4.061702] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.077306] Goodix-TS 5-005d: I2C retry: 4
- [ 4.081492] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.097097] Goodix-TS 5-005d: I2C retry: 5
- [ 4.101131] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
- [ 4.107191] Goodix-TS 5-005d: GTP i2c test failed time 3.
- [ 4.133194] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.147934] Goodix-TS 5-005d: I2C retry: 1
- [ 4.152116] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.167720] Goodix-TS 5-005d: I2C retry: 2
- [ 4.171908] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.187511] Goodix-TS 5-005d: I2C retry: 3
- [ 4.191699] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.207301] Goodix-TS 5-005d: I2C retry: 4
- [ 4.211491] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.227093] Goodix-TS 5-005d: I2C retry: 5
- [ 4.231129] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
- [ 4.237154] Goodix-TS 5-005d: GTP i2c test failed time 2.
- [ 4.263195] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.277929] Goodix-TS 5-005d: I2C retry: 1
- [ 4.282116] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.297720] Goodix-TS 5-005d: I2C retry: 2
- [ 4.301907] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.317511] Goodix-TS 5-005d: I2C retry: 3
- [ 4.321699] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.337304] Goodix-TS 5-005d: I2C retry: 4
- [ 4.341490] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.357094] Goodix-TS 5-005d: I2C retry: 5
- [ 4.361130] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
- [ 4.367155] Goodix-TS 5-005d: GTP i2c test failed time 1.
- [ 4.393193] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.407927] Goodix-TS 5-005d: I2C retry: 1
- [ 4.412116] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.427718] Goodix-TS 5-005d: I2C retry: 2
- [ 4.431907] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.447509] Goodix-TS 5-005d: I2C retry: 3
- [ 4.451699] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.467301] Goodix-TS 5-005d: I2C retry: 4
- [ 4.471490] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:2) mode:FIFO slv_addr:0x5d MSTR_STS:0x011363c8 OPER:0x00000010
- [ 4.487093] Goodix-TS 5-005d: I2C retry: 5
- [ 4.491128] Goodix-TS 5-005d: gtp_reset_guitar exit init_done=0:
- [ 4.497151] Goodix-TS 5-005d: GTP i2c test failed time 0.
- [ 4.523036] Goodix-TS 5-005d: I2C communication ERROR!
- [ 4.527293] Goodix-TS: probe of 5-005d failed with error -107
- [ 4.533505] <<GTP-INF>>[gt1x_ts_probe:626] GTP Driver Version: V1.4<2015/07/10>
- [ 4.540154] <<GTP-INF>>[gt1x_ts_probe:627] GTP I2C Address: 0x14
- [ 4.546262] <<GTP-ERR>>[gt1x_parse_dt:331] regulator get of vdd_ana failed
- [ 4.553441] Goodix-TP 5-0014: Can not lookup pmx_ts_release pinstate -19
- [ 4.559706] <<GTP-INF>>[gt1x_reset_guitar:815] GTP RESET!
- [ 4.683209] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:5) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000090
- [ 4.697948] <<GTP-ERR>>[_do_i2c_write:433] I2c transfer error! (-107)
- [ 4.704355] <<GTP-ERR>>[gt1x_init:2353] Reset guitar failed!
- [ 4.709960] <<GTP-INF>>[gt1x_reset_guitar:815] GTP RESET!
- [ 4.833196] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:5) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000090
- [ 4.847929] <<GTP-ERR>>[_do_i2c_write:433] I2c transfer error! (-107)
- [ 4.854341] <<GTP-ERR>>[gt1x_init:2353] Reset guitar failed!
- [ 4.859947] <<GTP-INF>>[gt1x_reset_guitar:815] GTP RESET!
- [ 4.983194] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:5) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000090
- [ 4.997924] <<GTP-ERR>>[_do_i2c_write:433] I2c transfer error! (-107)
- [ 5.004344] <<GTP-ERR>>[gt1x_init:2353] Reset guitar failed!
- [ 5.009946] <<GTP-INF>>[gt1x_reset_guitar:815] GTP RESET!
- [ 5.133198] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:5) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000090
- [ 5.147933] <<GTP-ERR>>[_do_i2c_write:433] I2c transfer error! (-107)
- [ 5.154344] <<GTP-ERR>>[gt1x_init:2353] Reset guitar failed!
- [ 5.159951] <<GTP-INF>>[gt1x_reset_guitar:815] GTP RESET!
- [ 5.283195] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:5) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000090
- [ 5.297932] <<GTP-ERR>>[_do_i2c_write:433] I2c transfer error! (-107)
- [ 5.304338] <<GTP-ERR>>[gt1x_init:2353] Reset guitar failed!
- [ 5.309946] <<GTP-ERR>>[gt1x_init:2379] Init failed, use default setting
- [ 5.316826] i2c-msm-v2 78b9000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:4 tx:2) mode:FIFO slv_addr:0x14 MSTR_STS:0x011363c8 OPER:0x00000010
- [ 5.332390] <<GTP-ERR>>[_do_i2c_read:391] I2c Transfer error! (-107)
- [ 5.338716] <<GTP-ERR>>[gt1x_get_chip_type:922] I2c communication error.
- [ 5.345394] <<GTP-ERR>>[gt1x_init:2389] Get chip type failed!
- [ 5.351101] <<GTP-ERR>>[gt1x_ts_probe:664] gt1x_init() failed.
- [ 5.356994] Goodix-TP: probe of 5-0014 failed with error -1
- [ 5.383733] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x30 MSTR_STS:0x011363c8 OPER:0x00000010
- [ 5.398488] mmc3416x 1-0030: read reg 6 failed.(-107)
- [ 5.403498] mmc3416x 1-0030: Check device failed
- [ 5.408223] mmc3416x: probe of 1-0030 failed with error -107
- [ 5.413885] stk3x1x_probe: driver version = 3.4.4ts
- [ 5.418628] stk_ps 1-0048: stk3x1x_probe: stk3x1x_parse_dt ret=0
- [ 5.424877] input: stk3x1x-ls as /devices/soc.0/78b5000.i2c/i2c-1/1-0048/input/input0
- [ 5.432696] input: proximity as /devices/soc.0/78b5000.i2c/i2c-1/1-0048/input/input1
- [ 5.442260] mpu6050 1-0068: Regulator get failed vi2c ret=-19
- [ 5.553241] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:1 tx:1) mode:FIFO slv_addr:0x68 MSTR_STS:0x011363c8 OPER:0x00000010
- [ 5.567995] mpu6050 1-0068: Fail to read power mode, ret=-107
- [ 5.573699] mpu6050 1-0068: Cannot get invalid chip type
- [ 5.579095] mpu6050 1-0068: Probe device return error-107
- [ 5.584438] mpu6050: probe of 1-0068 failed with error -107
- [ 5.589947] AKM compass driver: initialize.
- [ 5.683218] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:2) mode:FIFO slv_addr:0xc MSTR_STS:0x011363c8 OPER:0x00000090
- [ 5.697882] akm8963 1-000c: akm_i2c_txdata: transfer failed.
- [ 5.703532] akm8963 1-000c: AKECS_Set_PowerDown: Can not set to powerdown mode.
- [ 5.710925] i2c-msm-v2 78b5000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:1) mode:FIFO slv_addr:0xc MSTR_STS:0x011363c8 OPER:0x00000010
- [ 5.726434] akm8963 1-000c: akm_i2c_rxdata: transfer failed.
- [ 5.732147] akm8963: probe of 1-000c failed with error -107
- [ 5.737695] AKM compass driver: initialize.
- [ 5.741772] i2c-core: driver [bma2x2-accel] using legacy suspend method
- [ 5.748375] i2c-core: driver [bma2x2-accel] using legacy resume method
- [ 5.755054] i2c-core: driver [bmi160] using legacy suspend method
- [ 5.760925] i2c-core: driver [bmi160] using legacy resume method
- [ 5.768055] qcom,qpnp-rtc qpnp-rtc-6: rtc core: registered qpnp_rtc as rtc0
- [ 5.774343] i2c /dev entries driver
- [ 5.781907] platform 1d00000.qcom,vidc: Driver msm_vidc_v4l2 requests probe deferral
- [ 5.792227] msm_actuator_i2c_probe:1313 msm_actuator_i2c_probe: succeeded
- [ 5.798627] LED trigger flashlight-trigger failed to register (-17)
- [ 5.805307] adp1660 i2c_add_driver success
- [ 5.808609] msm_flash_init_module:1114 Enter
- [ 5.813078] msm_flash_lm3642_init entry
- [ 5.817588] msm_eeprom_parse_memory_map: pageen not needed
- [ 5.822043] msm_eeprom_parse_memory_map: pageen not needed
- [ 5.827563] msm_eeprom_parse_memory_map: pageen not needed
- [ 5.864279] i2c-msm-v2 78b7000.i2c: msm_bus_scale_register_client(mstr-id:86):0x9 (ok)
- [ 5.871545] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:1 cur:0 tx) bc(rx:0 tx:3) mode:FIFO slv_addr:0x36 MSTR_STS:0x0d1300c8 OPER:0x00000090
- [ 5.903052] read_eeprom_memory: page write failed
- [ 5.906712] msm_eeprom_i2c_probe read_eeprom_memory failed
- [ 5.943054] msm_eeprom_i2c_probe failed! rc = -107
- [ 5.946814] msm_eeprom: probe of 3-006c failed with error -107
- [ 5.954793] g_sctrl[0] ed8ab800
- [ 5.957075] msm_camera_get_dt_gpio_req_tbl gpio req tbl index 2 invalid
- [ 5.963540] failed
- [ 5.965312] failed: msm_sensor_driver_get_gpio_data rc -22failed: rc -22
- [ 5.971995] failed: msm_sensor_driver_parse rc -22[ 5.976825] camera: probe of 3-0001 failed with error -22
- [ 5.982201] gc0310_init_module:487
- [ 5.989482] BMS: bms_get_adc: vadc not found - defer probe rc=-517
- [ 5.994676] BMS: qpnp_vm_bms_probe: Failed to get adc rc=-517
- [ 6.000371] spmi qpnp-vm-bms-10: Driver qcom,qpnp-vm-bms requests probe deferral
- [ 6.008015] CHG: qpnp_lbc_main_probe: Failed to read DT properties rc=-517
- [ 6.014688] spmi qpnp-linear-charger-8: Driver qcom,qpnp-linear-charger requests probe deferral
- [ 6.024012] unable to find DT imem DLOAD mode node
- [ 6.028345] unable to find DT imem EDLOAD mode node
- [ 6.034406] qpnp_vadc_get_temp: VADC read error with -517
- [ 6.038769] thermal thermal_zone0: failed to read out thermal zone 0
- [ 6.045430] qpnp_vadc_get_temp: VADC read error with -517
- [ 6.050486] thermal thermal_zone1: failed to read out thermal zone 1
- [ 6.057102] qpnp_vadc_get_temp: VADC read error with -517
- [ 6.062205] thermal thermal_zone2: failed to read out thermal zone 2
- [ 6.087673] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
- [ 6.095430] device-mapper: req-crypt: dm-req-crypt successfully initalized.
- [ 6.095430]
- [ 6.103896] cpuidle: using governor ladder
- [ 6.107570] cpuidle: using governor menu
- [ 6.111548] sdhci: Secure Digital Host Controller Interface driver
- [ 6.117680] sdhci: Copyright(c) Pierre Ossman
- [ 6.121979] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 6.134931] sdhci_msm 7824900.sdhci: host_use_default_qos = 1
- [ 6.139641] sdhci_msm 7824900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 3, qos type = 2
- [ 6.148285] sdhci_msm 7824900.sdhci: dma_latency = 2
- [ 6.153299] sdhci_msm 7824900.sdhci: dma_latency = 241
- [ 6.158474] sdhci_msm 7824900.sdhci: dma_latency = 501
- [ 6.163717] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
- [ 6.173090] sdhci_msm 7824900.sdhci: dma_latency = 200
- [ 6.178270] sdhci_msm 7824900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
- [ 6.187675] sdhci_msm 7824900.sdhci: dma_latency = 200
- [ 6.192850] sdhci_msm 7824900.sdhci: Host using default pm_qos
- [ 6.200013] mmc0: no vqmmc regulator found
- [ 6.203123] mmc0: no vmmc regulator found
- [ 6.236585] mmc0: SDHCI controller on 7824900.sdhci [7824900.sdhci] using 32-bit ADMA
- [ 6.250759] sdhci_msm 7864900.sdhci: host_use_default_qos = 1
- [ 6.255520] sdhci_msm 7864900.sdhci: For qos_policy(default qos) = 0, tbl_sz = 3, qos type = 2
- [ 6.264094] sdhci_msm 7864900.sdhci: dma_latency = 2
- [ 6.269098] sdhci_msm 7864900.sdhci: dma_latency = 241
- [ 6.274337] sdhci_msm 7864900.sdhci: dma_latency = 501
- [ 6.279515] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 1, tbl_sz = 1, qos type = 2
- [ 6.288918] sdhci_msm 7864900.sdhci: dma_latency = 200
- [ 6.294176] sdhci_msm 7864900.sdhci: For qos_policy(modified dynamic qos) = 2, tbl_sz = 1, qos type = 2
- [ 6.303509] sdhci_msm 7864900.sdhci: dma_latency = 200
- [ 6.308681] sdhci_msm 7864900.sdhci: Host using default pm_qos
- [ 6.316160] mmc1: no vqmmc regulator found
- [ 6.319219] mmc1: no vmmc regulator found
- [ 6.339629] mmc0: BKOPS_EN bit = 0
- [ 6.352387] mmc0: new HS200 MMC card at address 0001
- [ 6.353302] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA
- [ 6.353750] qcom,leds-qpnp: probe of leds-qpnp-7 failed with error -10
- [ 6.371542] mmcblk0: mmc0:0001 HAG4a2 14.6 GiB
- [ 6.375513] mmcblk0rpmb: mmc0:0001 HAG4a2 partition 3 4.00 MiB
- [ 6.386978] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33
- [ 6.406673] qce 720000.qcedev: Qualcomm Crypto 5.3.1 device found @0x720000
- [ 6.412606] qce 720000.qcedev: CE device = 0x0
- [ 6.412606] , IO base, CE = 0xf0680000
- [ 6.412606] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
- [ 6.412606] IO base BAM = 0x (null)
- [ 6.412606] BAM IRQ 239
- [ 6.412606] Engines Availability = 0x2010853
- [ 6.436782] sps:BAM 0x00704000 is registered.
- [ 6.445904] sps:BAM 0x00704000 (va:0xf06c0000) enabled: ver:0x25, number of pipes:8
- [ 6.457708] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
- [ 6.465080] qcedev: FIPS140-2 Known Answer Tests : Skipped
- [ 6.472001] qcrypto 720000.qcrypto: Qualcomm Crypto 5.3.1 device found @0x720000
- [ 6.478463] qcrypto 720000.qcrypto: CE device = 0x0
- [ 6.478463] , IO base, CE = 0xf07c0000
- [ 6.478463] , Consumer (IN) PIPE 4, Producer (OUT) PIPE 5
- [ 6.478463] IO base BAM = 0x (null)
- [ 6.478463] BAM IRQ 239
- [ 6.478463] Engines Availability = 0x2010853
- [ 6.512805] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x0000000000704000 irq 239
- [ 6.520410] qcrypto 720000.qcrypto: qcrypto-ecb-aes
- [ 6.524611] qcrypto 720000.qcrypto: qcrypto-cbc-aes
- [ 6.529404] qcrypto 720000.qcrypto: qcrypto-ctr-aes
- [ 6.534281] qcrypto 720000.qcrypto: qcrypto-ecb-des
- [ 6.539100] qcrypto 720000.qcrypto: qcrypto-cbc-des
- [ 6.543993] qcrypto 720000.qcrypto: qcrypto-ecb-3des
- [ 6.548913] qcrypto 720000.qcrypto: qcrypto-cbc-3des
- [ 6.554008] qcrypto 720000.qcrypto: qcrypto-xts-aes
- [ 6.558709] qcrypto 720000.qcrypto: qcrypto-sha1
- [ 6.563351] qcrypto 720000.qcrypto: qcrypto-sha256
- [ 6.568081] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-aes
- [ 6.574274] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-des
- [ 6.580402] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha1-cbc-3des
- [ 6.586726] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-aes
- [ 6.593028] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-des
- [ 6.599371] qcrypto 720000.qcrypto: qcrypto-aead-hmac-sha256-cbc-3des
- [ 6.605796] qcrypto 720000.qcrypto: qcrypto-hmac-sha1
- [ 6.610779] qcrypto 720000.qcrypto: qcrypto-hmac-sha256
- [ 6.616117] qcrypto 720000.qcrypto: qcrypto-aes-ccm
- [ 6.620857] qcrypto 720000.qcrypto: qcrypto-rfc4309-aes-ccm
- [ 6.626225] qcrypto: FIPS140-2 Known Answer Tests: Skipped
- [ 6.632677] usbcore: registered new interface driver usbhid
- [ 6.637265] usbhid: USB HID core driver
- [ 6.641738] zram: Created 1 device(s) ...
- [ 6.645915] ashmem: initialized
- [ 6.649275] logger: created 256K log 'log_main'
- [ 6.653978] logger: created 256K log 'log_events'
- [ 6.658737] logger: created 256K log 'log_radio'
- [ 6.663460] logger: created 256K log 'log_system'
- [ 6.668160] sps:BAM 0x078c4000 is registered.
- [ 6.671762] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0 Power-on reason: Triggered from Hard Reset and 'cold' boot
- [ 6.682079] qcom,qpnp-power-on qpnp-power-on-1: PMIC@SID0: Power-off reason: Triggered from PS_HOLD (PS_HOLD/MSM controlled shutdown)
- [ 6.694312] input: qpnp_pon as /devices/virtual/input/input2
- [ 6.701743] PMIC@SID0: PM8909 v1.1 options: 0, 2, 0, 0
- [ 6.723804] populate_opp_table: clock-a7: OPP tables populated (cpu 3)
- [ 6.729299] print_opp_table: clock_cpu: a7: OPP voltage for 400000000: 4
- [ 6.736066] print_opp_table: clock_cpu: a7: OPP voltage for 1094400000: 7
- [ 6.744587] bimc-bwmon 410000.qcom,gpu-bwmon: BW HWmon governor registered.
- [ 6.750731] bimc-bwmon 408000.qcom,cpu-bwmon: BW HWmon governor registered.
- [ 6.760404] devfreq qcom,cpubw.32: Couldn't update frequency transition information.
- [ 6.772134] coresight-fuse 5e01c.fuse: Fuse initialized
- [ 6.777125] coresight-cti 810000.cti: CTI initialized
- [ 6.781595] coresight-cti 811000.cti: CTI initialized
- [ 6.786711] coresight-cti 812000.cti: CTI initialized
- [ 6.791660] coresight-cti 813000.cti: CTI initialized
- [ 6.796780] coresight-cti 814000.cti: CTI initialized
- [ 6.801732] coresight-cti 815000.cti: CTI initialized
- [ 6.807111] coresight-cti 816000.cti: CTI initialized
- [ 6.811839] coresight-cti 817000.cti: CTI initialized
- [ 6.816905] coresight-cti 818000.cti: CTI initialized
- [ 6.821884] coresight-cti 851000.cti: CTI initialized
- [ 6.826980] coresight-cti 852000.cti: CTI initialized
- [ 6.831963] coresight-cti 853000.cti: CTI initialized
- [ 6.837038] coresight-cti 854000.cti: CTI initialized
- [ 6.841989] coresight-cti 83c000.cti: CTI initialized
- [ 6.847096] coresight-cti 838000.cti: CTI initialized
- [ 6.852104] coresight-cti 835000.cti: CTI initialized
- [ 6.857200] coresight-cti 830000.cti: CTI initialized
- [ 6.862624] coresight-csr 801000.csr: CSR initialized
- [ 6.867875] coresight-tmc 826000.tmc: Byte Counter feature enabled
- [ 6.873180] sps:BAM 0x00884000 is registered.
- [ 6.877531] coresight-tmc 826000.tmc: TMC initialized
- [ 6.882892] coresight-tmc 825000.tmc: TMC initialized
- [ 6.890142] nidnt boot config: 0
- [ 6.893870] coresight-tpiu 820000.tpiu: NIDnT on SDCARD only mode
- [ 6.899084] coresight-tpiu 820000.tpiu: TPIU initialized
- [ 6.905029] coresight-funnel 821000.funnel: FUNNEL initialized
- [ 6.910256] coresight-funnel 869000.funnel: FUNNEL initialized
- [ 6.916154] coresight-funnel 868000.funnel: FUNNEL initialized
- [ 6.921881] coresight-funnel 855000.funnel: FUNNEL initialized
- [ 6.928127] coresight-replicator 824000.replicator: REPLICATOR initialized
- [ 6.935084] coresight-dbgui 86d000.dbgui: DebugUI capture enabled
- [ 6.940563] coresight-dbgui 86d000.dbgui: DebugUI initializaed
- [ 6.947131] coresight-stm 802000.stm: STM initialized
- [ 6.951893] coresight-hwevent 86c000.hwevent: Hardware Event driver initialized
- [ 6.959488] coresight-etm 84c000.etm: ETM initialized
- [ 6.964107] coresight-etm 84d000.etm: ETM initialized
- [ 6.969029] coresight-etm 84e000.etm: ETM initialized
- [ 6.974227] coresight-etm 84f000.etm: ETM initialized
- [ 6.979803] coresight-modem-etm modem_etm0.26: Modem ETM initialized
- [ 6.986184] coresight-wcn-etm wcn_etm0.25: Wireless ETM initialized
- [ 6.992368] coresight-rpm-etm rpm_etm0.24: RPM ETM initialized
- [ 6.998128] coresight-qpdi 1941000.qpdi: CoreSight QPDI driver initialized
- [ 7.004814] usbcore: registered new interface driver snd-usb-audio
- [ 7.011600] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
- [ 7.018326] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 7.042899] msm-pcm-lpa qcom,msm-pcm-lpa.46: msm_pcm_probe: dev name qcom,msm-pcm-lpa.46
- [ 7.051157] platform qcom,msm-voip-dsp.48: Driver msm-voip-dsp requests probe deferral
- [ 7.058648] platform qcom,msm-pcm-voice.49: Driver msm-pcm-voice requests probe deferral
- [ 7.074870] msm8x16-asoc-wcd sound.71: default codec configured
- [ 7.081688] msm8x16-asoc-wcd sound.71: ASoC: platform (null) not registered
- [ 7.087733] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
- [ 7.094707] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
- [ 7.102183] u32 classifier
- [ 7.104442] Actions configured
- [ 7.107752] Netfilter messages via NETLINK v0.30.
- [ 7.112551] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 7.119543] ctnetlink v0.93: registering with nfnetlink.
- [ 7.124571] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 7.130757] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 7.137350] xt_time: kernel timezone is -0000
- [ 7.141357] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 7.146555] arp_tables: (C) 2002 David S. Miller
- [ 7.150859] TCP: cubic registered
- [ 7.154212] Initializing XFRM netlink socket
- [ 7.159331] NET: Registered protocol family 10
- [ 7.164018] mip6: Mobile IPv6
- [ 7.165984] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 7.171550] sit: IPv6 over IPv4 tunneling driver
- [ 7.176687] NET: Registered protocol family 17
- [ 7.180411] NET: Registered protocol family 15
- [ 7.185006] Bridge firewalling registered
- [ 7.188785] Ebtables v2.0 registered
- [ 7.192735] Bluetooth: ee855ef0
- [ 7.195379] Bluetooth: ee855ef0Bluetooth: ee855f00
- [ 7.200062] Bluetooth: ee855ed8Bluetooth: ee855ed8
- [ 7.204848] Bluetooth: ee855ed0Bluetooth: ee855f10
- [ 7.209618] Bluetooth: ee855f10[ 7.212772] l2tp_core: L2TP core driver, V2.0
- [ 7.217129] l2tp_ppp: PPPoL2TP kernel driver, V2.0
- [ 7.221847] l2tp_ip: L2TP IP encapsulation support (L2TPv3)
- [ 7.227482] l2tp_netlink: L2TP netlink interface
- [ 7.232047] l2tp_eth: L2TP ethernet pseudowire support (L2TPv3)
- [ 7.237990] l2tp_debugfs: L2TP debugfs support
- [ 7.242364] l2tp_ip6: L2TP IP encapsulation support for IPv6 (L2TPv3)
- [ 7.259611] of_batterydata_read_data: palladium_1500mah loaded
- [ 7.276409] BMS: bms_load_hw_defaults: BMS_EN=1 Sample_Interval-S1=[100]S2=[70] Sample_Count-S1=[256]S2=[128] Fifo_Length-S1=[5]S2=[5] FSM_state=2
- [ 7.296239] BMS: calculate_initial_soc: warm_reset=0 est_ocv=0 shutdown_soc_invalid=0 shutdown_ocv=3870000 shutdown_soc=61 last_soc=61 calculated_soc=61 last_ocv_uv=3870000
- [ 7.324833] BMS: qpnp_vm_bms_probe: probe success: soc=61 vbatt=3778103 ocv=3870000 warm_reset=0
- [ 7.447959] CHG: qpnp_lbc_main_probe: Probe chg_dis=0 bpd=1 usb=1 batt_pres=1 batt_volt=3795734 soc=61
- [ 7.456372] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
- [ 7.463991] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 7.484223] msm8x16-asoc-wcd sound.71: default codec configured
- [ 7.491275] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
- [ 7.497060] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
- [ 7.504013] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
- [ 7.511099] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
- [ 7.518777] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 7.527132] Registering SWP/SWPB emulation handler
- [ 7.532213] Loading module verification certificates
- [ 7.542719] MODSIGN: Loaded cert 'Magrathea: Glacier signing key: 0c72b4353433056b2cc9d98393df985ebf3803cb'
- [ 7.683228] oem_otg_ext_vreg: disabling
- [ 7.686032] spk_vreg: disabling
- [ 7.689193] regulator-dummy: disabling
- [ 7.693786] msm8x16-asoc-wcd sound.71: default codec configured
- [ 7.700963] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
- [ 7.706741] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
- [ 7.713736] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
- [ 7.720800] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
- [ 7.728439] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 7.737926] file system registered
- [ 7.740373] mbim_init: initialize 1 instances
- [ 7.744775] mbim_init: Initialized 1 ports
- [ 7.748706] mbim_bam_setup: no_ports:1
- [ 7.752681] mbim_bam_setup: Initialized 1 ports
- [ 7.759007] rndis_qc_init: initialize rndis QC instance
- [ 7.763974] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 7.770049] android_usb gadget: Number of LUNs=1
- [ 7.774697] lun0: LUN: removable file: (no medium)
- [ 7.780093] android_usb gadget: android_usb ready
- [ 7.784298] msm_hsusb msm_hsusb: [ci13xxx_start] hw_ep_max = 16
- [ 7.790138] msm_hsusb msm_hsusb: CI13XXX_CONTROLLER_RESET_EVENT received
- [ 7.797772] msm8x16-asoc-wcd sound.71: default codec configured
- [ 7.799842] input: gpio-keys as /devices/soc.0/gpio_keys.70/input/input3
- [ 7.809554] qcom,qpnp-rtc qpnp-rtc-6: setting system clock to 1970-01-01 00:01:36 UTC (96)
- [ 7.811645] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
- [ 7.811695] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
- [ 7.811836] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
- [ 7.811960] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
- [ 7.812025] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 7.812736] msm8x16-asoc-wcd sound.71: default codec configured
- [ 7.814919] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
- [ 7.814962] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
- [ 7.815099] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
- [ 7.882074] msm_thermal:interrupt_mode_init Interrupt mode init
- [ 7.888860] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
- [ 7.889588] /soc/qcom,lpm-levels/qcom,pm-cluster@0: No CPU phandle, assuming single cluster
- [ 7.903935] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 7.912247] msm8x16-asoc-wcd sound.71: default codec configured
- [ 7.919633] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
- [ 7.925513] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
- [ 7.928723] led_gpio_flash_probe:probe successfully!
- [ 7.932985] qcom,cc-debug-8909 1874000.qcom,cc-debug: Registered Debug Mux successfully
- [ 7.933958] ---+++ get pwm-freq prop failed
- [ 7.933961] ---+++ get pwm-duty prop failed
- [ 7.934086] ---+++ gpio_clk_probe succeeded
- [ 7.934489] clock_late_init: Removing enables held for handed-off clocks
- [ 7.937433] ALSA device list:
- [ 7.937436] No soundcards found.
- [ 7.970820] platform sound.71: Driver msm8x16-asoc-wcd requests probe ��rʺ����spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
- [ 7.978648] Freeing unused kernel memory: 396K (c1100000 - c1163000)
- [ 7.991148] spmi msm8x16_wcd_codec-13: Driver wcd-spmi-core requests probe deferral
- [ 7.999586] msm8x16-asoc-wcd sound.71: default codec configured
- [ 8.006952] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
- [ 8.012658] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
- [ 8.019661] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
- [ 8.033499] init: init first stage started!
- [ 8.165142] type=1403 audit(96.859:2): policy loaded auid=4294967295 ses=4294967295
- [ 8.173282] type=1404 audit(96.869:3): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
- [ 8.263420] init: (Initializing SELinux enforcing took 0.23s.)
- [ 8.277982] init: init second stage started!
- [ 8.294775] init: property_set("ro.boot.bootdevice", "7824900.sdhci") failed
- [ 8.309196] init: Running restorecon...
- [ 8.614438] init: waitpid failed: No child processes
- [ 8.619086] init: (Loading properties from /default.prop took 0.00s.)
- [ 8.629766] init: /init.rc: 679: invalid keyword 'setprop'
- [ 8.634404] init: /init.rc: 680: invalid keyword 'chmod'
- [ 8.639533] init: /init.rc: 681: invalid keyword 'chown'
- [ 8.645117] init: (Parsing /init.environ.rc took 0.00s.)
- [ 8.651359] init: (Parsing /init.usb.rc took 0.00s.)
- [ 8.660478] init: /init.qcom.rc: 582: user requires 1 argument
- [ 8.668263] init: ignored duplicate definition of service 'RIDL'init: (Parsing init.qcom.usb.rc took 0.01s.)
- [ 8.690575] init: ignored duplicate definition of service 'perfd'init: init.target.rc: 151: invalid keyword 'load_all_props'
- [ 8.701908] init: ignored duplicate definition of service 'poweroffhandler'init: (Parsing init.carrier.rc took 0.01s.)
- [ 8.711585] init: (Parsing init.target.rc took 0.02s.)
- [ 8.718653] init: (Parsing init.qcom.factory.rc took 0.00s.)
- [ 8.723359] init: (Parsing /init.qcom.rc took 0.07s.)
- [ 8.730940] init: (Parsing /init.usb.configfs.rc took 0.00s.)
- [ 8.735920] init: (Parsing /init.zygote32.rc took 0.00s.)
- [ 8.741060] init: (Parsing /init.rc took 0.12s.)
- [ 8.746924] init: Starting service 'ueventd'...
- [ 8.752782] init: Waiting for /dev/.coldboot_done...
- [ 8.757142] ueventd: ueventd started!
- [ 9.801024] ueventd: Coldboot took 1.03s.
- [ 9.803042] init: Waiting for /dev/.coldboot_done too�[ 9.824822] init: write_file: Unable to open '/proc/sys/kernel/hung_task_timeout_secs': No such file or directory
- [ 9.846043] init: write_file: Unable to open '/proc/sys/abi/swp': No such file or directory
- [ 9.958691] EXT4-fs (mmcblk0p21): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 9.966372] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/system,target=/system,type=ext4)=0
- [ 9.976376] EXT4-fs (mmcblk0p33): Ignoring removed nomblk_io_submit option
- [ 9.998273] EXT4-fs (mmcblk0p33): mounted filesystem with ordered data mode. Opts: errors=remount-ro,nomblk_io_submit
- [ 10.008188] fs_mgr: check_fs(): mount(/dev/block/bootdevice/by-name/userdata,/data,ext4)=0: Success
- [ 10.018688] fs_mgr: check_fs(): unmount(/data) succeeded
- [ 10.024489] fs_mgr: Running /system/bin/e2fsck on /dev/block/bootdevice/by-name/userdata
- [ 10.883177] e2fsck (239) used greatest stack depth: 5384 bytes left
- [ 10.888783] e2fsck: e2fsck 1.42.9 (28-Dec-2013)
- [ 10.888783]
- [ 10.894667] e2fsck: Pass 1: Checking inodes, blocks, and sizes
- [ 10.894667]
- [ 10.901700] e2fsck: Pass 2: Checking directory structure
- [ 10.901700]
- [ 10.908535] e2fsck: Pass 3: Checking directory connectivity
- [ 10.908535]
- [ 10.915582] e2fsck: Pass 4: Checking reference counts
- [ 10.915582]
- [ 10.922010] e2fsck: Pass 5: Checking group summary information
- [ 10.922010]
- [ 10.929455] e2fsck: data: 2863/316992 files (9.6% non-contiguous), 106027/1267451 blocks
- [ 10.929455]
- [ 10.944304] EXT4-fs (mmcblk0p33): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,discard
- [ 10.954006] fs_mgr: __mount(source=/dev/block/bootdevice/by-name/userdata,target=/data,type=ext4)=0
- [ 10.968078] init (232) used greatest stack depth: 5088 bytes left
- [ 10.977754] init: (Parsing /system/etc/init/atrace.rc took 0.00s.)
- [ 10.987102] init: (Parsing /system/etc/init/audioserver.rc took 0.00s.)
- [ 10.993291] init: (Parsing /system/etc/init/bootanim.rc took 0.00s.)
- [ 10.999811] init: (Parsing /system/etc/init/bootstat.rc took 0.00s.)
- [ 11.006156] init: (Parsing /system/etc/init/cameraserver.rc took 0.00s.)
- [ 11.012573] init: (Parsing /system/etc/init/debuggerd.rc took 0.00s.)
- [ 11.019170] init: (Parsing /system/etc/init/drmserver.rc took 0.00s.)
- [ 11.025842] init: (Parsing /system/etc/init/dumpstate.rc took 0.00s.)
- [ 11.031884] init: (Parsing /system/etc/init/gatekeeperd.rc took 0.00s.)
- [ 11.038770] init: (Parsing /system/etc/init/init-debug.rc took 0.00s.)
- [ 11.045179] init: (Parsing /system/etc/init/installd.rc took 0.00s.)
- [ 11.051332] init: (Parsing /system/etc/init/keystore.rc took 0.00s.)
- [ 11.057841] init: (Parsing /system/etc/init/lmkd.rc took 0.00s.)
- [ 11.064256] init: (Parsing /system/etc/init/logcatd.rc took 0.00s.)
- [ 11.070217] init: (Parsing /system/etc/init/logd.rc took 0.00s.)
- [ 11.076195] init: (Parsing /system/etc/init/mdnsd.rc took 0.00s.)
- [ 11.082119] init: (Parsing /system/etc/init/mediacodec.rc took 0.00s.)
- [ 11.088751] init: (Parsing /system/etc/init/mediadrmserver.rc took 0.00s.)
- [ 11.095655] init: (Parsing /system/etc/init/mediaextractor.rc took 0.00s.)
- [ 11.102378] init: (Parsing /system/etc/init/mediaserver.rc took 0.00s.)
- [ 11.109229] init: (Parsing /system/etc/init/mtpd.rc took 0.00s.)
- [ 11.115062] init: (Parsing /system/etc/init/netd.rc took 0.00s.)
- [ 11.120942] init: (Parsing /system/etc/init/perfprofd.rc took 0.00s.)
- [ 11.127485] init: (Parsing /system/etc/init/racoon.rc took 0.00s.)
- [ 11.133768] init: (Parsing /system/etc/init/rild.rc took 0.00s.)
- [ 11.139599] init: (Parsing /system/etc/init/servicemanager.rc took 0.00s.)
- [ 11.146539] init: (Parsing /system/etc/init/surfaceflinger.rc took 0.00s.)
- [ 11.153308] init: (Parsing /system/etc/init/uncrypt.rc took 0.00s.)
- [ 11.159511] init: (Parsing /system/etc/init/vdc.rc took 0.00s.)
- [ 11.165531] init: (Parsing /system/etc/init/vold.rc took 0.00s.)
- [ 11.178446] EXT4-fs (mmcblk0p23): warning: maximal mount count reached, running e2fsck is recommended
- [ 11.187356] EXT4-fs (mmcblk0p23): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 11.202234] EXT4-fs (mmcblk0p22): warning: maximal mount count reached, running e2fsck is recommended
- [ 11.211110] EXT4-fs (mmcblk0p22): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 11.229862] EXT4-fs (mmcblk0p27): VFS: Can't find ext4 filesystem
- [ 11.237567] init: Starting service 'logd'...
- [ 11.296471] logd.auditd: start
- [ 11.298533] logd.klogd: 11295517391
- [ 12.059346] init: (Loading properties from /system/vendor/Default/system/vendor/vendor.prop took 0.00s.)
- [ 12.067943] init: (Loading properties from /persist/speccfg/vendor_ro.prop took 0.01s.)
- [ 12.079270] init: (Loading properties from /system/vendor/vendor.prop took 0.00s.)
- [ 12.087063] init: (Loading properties from /system/vendor/Default/system/vendor/vendor.prop took 0.00s.)
- [ 12.095650] init: (Loading properties from /persist/speccfg/vendor_persist.prop took 0.01s.)
- [ 12.104913] init: property_set("ro.telephony.default_network", "22,20") failed
- [ 12.111257] init: (Loading properties from /system/vendor/default.prop took 0.01s.)
- [ 12.118990] init: (Loading properties from /system/vendor/power.prop took 0.00s.)
- [ 12.126320] init: (Loading properties from /system/build.prop took 0.07s.)
- [ 12.133236] init: (Loading properties from /vendor/build.prop took 0.00s.)
- [ 12.139996] init: (Loading properties from /factory/factory.prop took 0.00s.)
- [ 12.147467] init: /recovery not specified in fstab
- [ 12.152851] init: Starting service 'debuggerd'...
- [ 12.157846] init: do_start: Service debuggerd64 not found
- [ 12.165491] init: Starting service 'vold'...
- [ 12.172524] init: Not bootcharting.
- [ 12.449370] init: Starting service 'exec 1 (/system/bin/tzdatacheck)'...
- [ 12.488549] init: Service 'exec 1 (/system/bin/tzdatacheck)' (pid 261) exited with status 0
- [ 12.554595] init: Starting service 'carrier_switcher'...
- [ 12.561543] init: (Loading properties from /data/local.prop took 0.00s.)
- [ 12.780593] init: Starting service 'logd-reinit'...
- [ 12.786249] init: property 'persist.sys.ssr.enable_debug' doesn't exist while expanding '${persist.sys.ssr.enable_debug}'
- [ 12.796375] init: write: cannot expand '${persist.sys.ssr.enable_debug}'
- [ 12.802948] init: property 'persist.sys.mba_boot_timeout' doesn't exist while expanding '${persist.sys.mba_boot_timeout}'
- [ 12.814014] init: write: cannot expand '${persist.sys.mba_boot_timeout}'
- [ 12.820301] logd.daemon: reinit
- [ 12.824168] init: Service 'logd-reinit' (pid 266) exited with status 0
- [ 12.830244] init: property 'persist.sys.modem_auth_timeout' doesn't exist while expanding '${persist.sys.modem_auth_timeout}'
- [ 12.841539] init: write: cannot expand '${persist.sys.modem_auth_timeout}'
- [ 12.848712] init: property 'persist.sys.pil_proxy_timeout' doesn't exist while expanding '${persist.sys.pil_proxy_timeout}'
- [ 12.859516] init: write: cannot expand '${persist.sys.pil_proxy_timeout}'
- [ 12.871510] pil-q6v5-mss 4080000.qcom,mss: modem: loading from 0x88000000 to 0x8d300000
- [ 12.897057] pil-q6v5-mss 4080000.qcom,mss: MBA: loading from 0xaf400000 to 0xaf500000
- [ 12.950362] pil-q6v5-mss 4080000.qcom,mss: MBA boot done
- [ 13.763835] pil-q6v5-mss 4080000.qcom,mss: modem: Brought out of reset
- [ 13.840848] pil-q6v5-mss 4080000.qcom,mss: modem: Power/Clock ready interrupt received
- [ 13.840862] pil-q6v5-mss 4080000.qcom,mss: Subsystem error monitoring/handling services are up
- [ 13.841097] spmi msm8x16_wcd_codec-12: Driver wcd-spmi-core requests probe deferral
- [ 13.841102] memshare: Modem Restart has happened
- [ 13.841452] init: Service 'carrier_switcher' (pid 262) exited with status 0
- [ 13.841722] init: Starting service 'exec 2 (/init.qcom.early_boot.sh)'...
- [ 13.842034] msm8x16-asoc-wcd sound.71: default codec configured
- [ 13.844432] msm8x16-asoc-wcd sound.71: ASoC: CODEC (null) not registered
- [ 13.844484] msm8x16-asoc-wcd sound.71: snd_soc_register_card failed (-517)
- [ 13.844639] platform sound.71: Driver msm8x16-asoc-wcd requests probe deferral
- [ 13.848308] msm8x16-asoc-wcd sound.71: default codec configured
- [ 13.856899] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: no dapm match for VOICEMMODE1_DL --> VoiceMMode1 --> SEC_MI2S_RX_Voice Mixer
- [ 13.856910] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: Failed to add route VOICEMMODE1_DL -> VoiceMMode1 -> SEC_MI2S_RX_Voice Mixer
- [ 13.856930] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: no dapm match for VOICEMMODE2_DL --> VoiceMMode2 --> SEC_MI2S_RX_Voice Mixer
- [ 13.856937] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: Failed to add route VOICEMMODE2_DL -> VoiceMMode2 -> SEC_MI2S_RX_Voice Mixer
- [ 13.860994] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: no dapm match for VOICE2_STUB_DL --> Voice2 Stub --> INTERNAL_BT_SCO_RX_Voice Mixer
- [ 13.861003] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: Failed to add route VOICE2_STUB_DL -> Voice2 Stub -> INTERNAL_BT_SCO_RX_Voice Mixer
- [ 13.891714] msm-pcm-routing qcom,msm-pcm-routing.43: ASoC: mux SLIM_0_RX AANC MUX has no paths
- [ 13.912618] wcd-spmi-core msm8x16_wcd_codec-12: ASoC: mux RX3 MIX1 INP3 has no paths
- [ 13.912852] wcd-spmi-core msm8x16_wcd_codec-12: ASoC: mux RX2 MIX1 INP3 has no paths
- [ 13.944231] sysmon-qmi: sysmon_clnt_svc_arrive: Connection established between QMI handle and modem's SSCTL service
- [ 14.024643] M-Notify: General: 7
- [ 14.151171] init: property_set("ro.opengles.version", "196608") failed
- [ 14.708624] init: Service 'exec 2 (/init.qcom.early_boot.sh)' (pid 286) exited with status 0
- [ 14.721714] init: Starting service 'healthd'...
- [ 14.727038] init: Starting service 'qcom-debug'...
- [ 14.731700] binder: 324:324 transaction failed 29189, size 0-0
- [ 14.732521] init: Starting service 'qcom-c_core-sh'...
- [ 14.734364] init: Starting service 'config_bluetooth'...
- [ 14.736390] init: Starting service 'qseecomd'...
- [ 14.738389] init: Starting service 'per_mgr'...
- [ 14.740322] init: Starting service 'lmkd'...
- [ 14.742384] init: Starting service 'servicemanager'...
- [ 14.744503] init: Starting service 'surfaceflinger'...
- [ 14.759646] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet0/accept_ra': No such file or directory
- [ 14.759714] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet1/accept_ra': No such file or directory
- [ 14.759783] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet2/accept_ra': No such file or directory
- [ 14.759860] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet3/accept_ra': No such file or directory
- [ 14.759928] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet4/accept_ra': No such file or directory
- [ 14.759994] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet5/accept_ra': No such file or directory
- [ 14.760057] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet6/accept_ra': No such file or directory
- [ 14.760120] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet7/accept_ra': No such file or directory
- [ 14.760183] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio0/accept_ra': No such file or directory
- [ 14.760248] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio1/accept_ra': No such file or directory
- [ 14.760311] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio2/accept_ra': No such file or directory
- [ 14.760375] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio3/accept_ra': No such file or directory
- [ 14.760438] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio4/accept_ra': No such file or directory
- [ 14.760505] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio5/accept_ra': No such file or directory
- [ 14.760596] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio6/accept_ra': No such file or directory
- [ 14.760662] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_sdio7/accept_ra': No such file or directory
- [ 14.760727] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb0/accept_ra': No such file or directory
- [ 14.760791] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb1/accept_ra': No such file or directory
- [ 14.760866] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb2/accept_ra': No such file or directory
- [ 14.760941] init: write_file: Unable to open '/proc/sys/net/ipv6/conf/rmnet_usb3/accept_ra': No such file or directory
- [ 14.762356] init: Starting service 'rmt_storage'...
- [ 15.005509] init: insmod: open("/system/lib/modules/adsprpc.ko") failed: No such file or directoryinit: Starting service 'console'...
- [ 15.035821] enable_store: android_usb: already disabled
- [ 15.041847] init: Starting service 'adbd'...
- [ 15.055518] init: Starting service 'ppd'...
- [ 15.060488] init: cannot find '/system/bin/update_verifier' (No such file or directory), disabling 'exec 3 (/system/bin/update_v�[ 15.113288] init: cannot find '/system/bin/install-recovery.sh' (No such file or directory), disabling 'flash_recovery'
- [ 15.133738] init: Starting service 'qcomsysd'...
- [ 15.139340] init: Starting service 'qcom-c_main-sh'...
- [ 15.148596] init: Starting service 'cnd'...
- [ 15.165253] init: Starting service 'irsc_util'...
- [ 15.171131] init: Starting service 'tftp_server'...
- [ 15.178549] init: Starting service 'ptt_socket_app'...
- [ 15.196174] init: Starting service 'cnss_diag'...
- [ 15.202391] init: Starting service 'atfwd_quec'...
- [ 15.220611] handle_qmi_request: Error getting req_desc for msg_id 36
- [ 15.227441] mem_share_svc_recv_msg: Error receiving message
- [ 15.235781] init: Starting service 'quecserver'...
- [ 15.240847] init: cannot find '/system/bin/usb_uicc_client' (No such file or directory), disabling 'usb_uicc_daemon'
- [ 15.263668] init: Starting service 'bms-sh'...
- [ 15.274088] init: Starting service 'qcom-usb-sh'...
- [ 15.279188] init: cannot find '/system/bin/qrngd' (No such file or directory), disabling 'qrngd'
- msm8909:/ $ [ 15.319990] getprop (366) used greatest stack depth: 4888 bytes left
- [ 15.354193] init: Starting service 'thermal-engine'...
- [ 15.360759] init: Starting service 'wcnss-service'...
- [ 15.395360] init: Starting service 'imsstarter'...
- [ 15.400583] init: cannot find '/system/bin/dts_configurator' (No such file or directory), disabling 'dts_configurator'
- [ 15.431040] init: Starting service 'zygote'...
- [ 15.459566] init: Starting service 'audioserver'...
- [ 15.479389] init: Starting service 'cameraserver'...
- [ 15.485994] init: Starting service 'drm'...
- [ 15.491395] init: Starting service 'installd'...
- [ 15.508946] init: couldn't write 390 to /dev/cpuset/camera-daemon/tasks: No such file or directory
- [ 15.536326] init: Starting service 'keystore'...
- [ 15.542573] init: Starting service 'mediacodec'...
- [ 15.555802] init: Starting service 'mediadrm'...
- [ 15.566855] init: Starting service 'mediaextractor'...
- [ 15.582416] init: Starting service 'media'...
- [ 15.591023] init: Starting service 'netd'...
- [ 15.597706] init: Starting service 'ril-daemon'...
- [ 15.607365] gbam_connect_work: Bam channel is not ready
- [ 15.626556] init: Starting service 'dpmd'...
- [ 15.632213] init: Starting service 'cnss-daemon'...
- [ 15.660029] init: Starting service 'loc_launcher'...
- [ 15.677409] init: Starting service 'qcom-sh'...
- [ 15.693932] init: Service fuse_uicc0 does not have a SELinux domain defined.
- [ 15.701089] init: Starting service 'RIDL'...
- [ 15.707450] init: Starting service 'fidodaemon'...
- [ 15.715432] init: Starting service 'qcamerasvr'...
- [ 15.735400] init: Starting service 'time_daemon'...
- [ 15.742261] init: Starting service 'audiod'...
- [ 15.771321] init: Starting service 'gatekeeperd'...
- [ 15.904333] init: Starting service 'perfprofd'...
- [ 15.909671] init: Service 'qcom-debug' (pid 325) exited with status 0
- [ 15.977897] init: Service 'qcom-c_core-sh' (pid 326) exited with status 0
- [ 15.991702] healthd: BatteryTechnologyPath not found
- [ 15.996372] init: Service 'irsc_util' (pid 358) exited with status 0
- [ 16.002455] init: Service 'cnss_diag' (pid 365) exited with status 255
- [ 16.013287] healthd: BatteryFullChargePath not found
- [ 16.017252] healthd: BatteryCycleCountPath not found
- [ 16.304789] QSEECOM: qseecom_load_app: App (keymaste) does'nt exist, loading apps for first time
- [ 16.320214] QSEECOM: qseecom_load_app: App with id 2 (keymaste) now loaded
- [ 16.520284] init: Starting service 'qmuxd'...
- [ 16.608238] init: cannot find '/system/bin/ipacm-diag' (No such file or directory), disabling 'ipacm-diag'
- [ 16.652840] devbw qcom,gpubw.23: Governor already resumed!
- [ 16.657449] devbw qcom,gpubw.23: Unable to resume BW HW mon governor (-16)
- [ 16.836733] init: Starting service 'imsqmidaemon'...
- [ 16.847907] init: Service 'imsstarter' (pid 381) exited with status 0
- [ 16.926060] init: Starting service 'vm_bms'...
- [ 16.931976] init: Service 'bms-sh' (pid 372) exited with status 0
- [ 17.035297] init: cannot find '/system/bin/ipacm' (No such file or directory), disabling 'ipacm'
- [ 17.376758] init: Starting service 'imsdatadaemon'...
- [ 17.635998] init: Starting service 'ril-daemon2'...
- [ 17.874334] init: Starting service 'qti'...
- [ 17.950339] init: Starting service 'bootanim'...
- [ 18.071205] init: Starting service 'netmgrd'...
- [ 18.253902] init: Service 'qcom-c_main-sh' (pid 356) exited with status 0
- [ 18.494445] init: Service 'qcom-usb-sh' (pid 374) exited with status 0
- [ 19.062465] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
- [ 19.096010] msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
- [ 19.102901] msm_dolby_dap_param_visualizer_control_get Incorrect VCNB length
- [ 19.163427] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
- [ 19.170077] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
- [ 19.198013] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 19.214546] msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
- [ 19.221040] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 19.228267] msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
- [ 19.236293] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
- [ 19.242886] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
- [ 19.261718] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 19.268085] msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
- [ 19.283236] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 19.288654] msm_audio_sound_focus_get: Could not get copp idx for port_id=4103
- [ 19.313286] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 19.318678] msm_audio_source_tracking_get: Could not get copp idx for port_id=4103
- [ 19.343301] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 19.348715] msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
- [ 19.441065] msm_pcm_volume_ctl_get substream runtime not found
- [ 19.463602] msm_pcm_volume_ctl_get substream runtime not found
- [ 19.469205] msm_pcm_volume_ctl_get substream runtime not found
- [ 19.496109] msm_pcm_volume_ctl_get substream runtime not found
- [ 19.523272] msm_pcm_volume_ctl_get substream or runtime not found
- [ 19.529532] msm_pcm_volume_ctl_get substream runtime not found
- [ 19.866201] wcdcal_hwdep_ioctl_shared: codec didn't set this 0!!
- [ 19.871529] wcdcal_hwdep_ioctl_shared: codec didn't set this 1!!
- [ 19.893815] wcdcal_hwdep_ioctl_shared: codec didn't set this 3!!
- [ 19.923335] msm_ds2_dap_set_security_control: dmid 0 license key 0
- [ 19.928629] core_set_license: Invalid cal block to send
- [ 19.943550] msm_ds2_dap_set_security_control: failed to set dolby license[ 19.950972] wcdcal_hwdep_ioctl_shared: codec didn't set this 0!!
- [ 19.973682] wcdcal_hwdep_ioctl_shared: codec didn't set this 1!!
- [ 19.979414] wcdcal_hwdep_ioctl_shared: codec didn't set this 3!!
- [ 20.407571] msm_qti_pp_get_rms_value_control, back not active to query rms be_idx:3
- [ 20.435993] msm_dolby_dap_param_to_get_control_get, port_id not set, do not query ADM
- [ 20.442947] msm_dolby_dap_param_visualizer_control_get Incorrect VCNB length
- [ 20.483562] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
- [ 20.490331] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
- [ 20.523295] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 20.528711] msm_audio_sound_focus_get: Could not get copp idx for port_id=16385
- [ 20.573343] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 20.578751] msm_audio_source_tracking_get: Could not get copp idx for port_id=16385
- [ 20.593339] msm_voice_sound_focus_get: Error getting Sound Focus Params, err=-22
- [ 20.599978] msm_voice_source_tracking_get: Error getting Source Tracking Params, err=-22
- [ 20.631208] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 20.650251] msm_audio_sound_focus_get: Could not get copp idx for port_id=4101
- [ 20.673435] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 20.678833] msm_audio_sound_focus_get: Could not get copp idx for port_id=4103
- [ 20.713281] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 20.718614] msm_audio_source_tracking_get: Could not get copp idx for port_id=4103
- [ 20.743748] msm_audio_get_copp_idx_from_port_id: Invalid FE, exiting
- [ 20.749242] msm_audio_source_tracking_get: Could not get copp idx for port_id=4101
- [ 20.825199] msm_pcm_volume_ctl_get substream runtime not found
- [ 20.830298] msm_pcm_volume_ctl_get substream runtime not found
- [ 20.853873] msm_pcm_volume_ctl_get substream runtime not found
- [ 20.858953] msm_pcm_volume_ctl_get substream runtime not found
- [ 20.873255] msm_pcm_volume_ctl_get substream or runtime not found
- [ 20.878925] msm_pcm_volume_ctl_get substream runtime not found
- [ 20.998338] init: Service 'qcom-sh' (pid 409) exited with status 0
- [ 21.295178] failed: s_ctrl (null) for camera_id 1[ 21.298948] MSM-SENSOR-INIT msm_sensor_driver_cmd:80 failed: msm_sensor_driver_probe rc -22
- [ 21.337353] msm_camera_fill_vreg_params:65 i 0 j 1 cam_vio
- [ 21.341887] msm_camera_fill_vreg_params:76 i 1 j 2 cam_vana
- [ 21.347604] msm_camera_fill_vreg_params:76 i 5 j 2 cam_vana
- [ 21.353229] msm_camera_fill_vreg_params:65 i 6 j 1 cam_vio
- [ 21.391842] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:2) mode:FIFO slv_addr:0x20 MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 21.406663] msm_sensor_match_id: hi843_8909: read id failed
- [ 21.412123] msm_sensor_check_id:1336 match id failed rc -107
- [ 21.428958] init: Service 'RIDL' (pid 410) exited with status 65
- [ 21.490755] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:2) mode:FIFO slv_addr:0x20 MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 21.505615] msm_sensor_match_id: hi843_8909: read id failed
- [ 21.511017] msm_sensor_check_id:1336 match id failed rc -107
- [ 21.599590] i2c-msm-v2 78b7000.i2c: NACK: slave not responding, ensure its powered: msgs(n:2 cur:0 tx) bc(rx:2 tx:2) mode:FIFO slv_addr:0x20 MSTR_STS:0x0d1300c8 OPER:0x00000010
- [ 21.614422] msm_sensor_match_id: hi843_8909: read id failed
- [ 21.620140] msm_sensor_check_id:1336 match id failed rc -107
- [ 21.673149] hi843_8909 power up failed
- [ 21.675713] MSM-SENSOR-INIT msm_sensor_driver_cmd:80 failed: msm_sensor_driver_probe rc -107
- [ 21.711975] msm_isp_close_node: halt timeout rc=0
- [ 21.718006] configuring dma source while dma is active
- [ 22.470525] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
- [ 22.476955] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
- [ 22.482889] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
- [ 22.489305] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
- [ 22.666242] Couldn't get snoc_qosgen
- [ 22.900816] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
- [ 22.908303] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
- [ 22.914301] IPC_RTR: msm_ipc_router_send_to: permission failure for rild
- [ 22.919977] IPC_RTR: msm_ipc_router_sendmsg: Send_to failure -1
- [ 23.082071] init: property_set("ro.ril.svlte1x", "false") failed
- [ 23.087807] init: property_set("ro.ril.svdo", "false") failed
- [ 23.465145] wcnss: no space available for smd frame
- [ 23.493193] wcnss: no space available for smd frame
- [ 23.532279] wcnss: no space available for smd frame
- [ 23.555236] init: Service 'config_bluetooth' (pid 327) exited with status 0
- [ 23.563384] wcnss: no space available for smd frame
- [ 23.593168] wcnss: no space available for smd frame
- [ 23.623196] wcnss: no space available for smd frame
- [ 37.882740] init: Service 'bootanim' (pid 530) exited with status 0
- [ 38.328260] init: Starting service 'qti-testscripts'...
- [ 38.334847] init: Starting service 'atfwd'...
- [ 38.340508] init: Starting service 'dmclient'...
- [ 38.351469] init: cannot find '/system/bin/qrngp' (No such file or directory), disabling 'qrngp'
- [ 38.372707] type=1400 audit(126.079:4): avc: denied { getattr } for pid=4123 comm="dmclient" path="/vendor" dev="rootfs" ino=7902 scontext=u:r:dmclient:s0 tcontext=u:object_r:rootfs:s0 tclass=lnk_file permissive=0
- [ 38.384246] init: Starting service 'exec 4 (/system/bin/bootstat)'...
- [ 38.448173] init: Service 'qti-testscripts' (pid 4117) exited with status 0
- [ 38.496440] init: Service 'exec 4 (/system/bin/bootstat)' (pid 4128) exited with status 0
- [ 38.504788] init: Starting service 'exec 5 (/system/bin/bootstat)'...
- [ 38.547945] init: Service 'exec 5 (/system/bin/bootstat)' (pid 4135) exited with status 0
- [ 38.556161] init: Starting service 'exec 6 (/system/bin/bootstat)'...
- [ 38.603844] init: Service 'exec 6 (/system/bin/bootstat)' (pid 4138) exited with status 0
- [ 38.611975] init: Starting service 'exec 7 (/system/bin/bootstat)'...
- [ 38.669749] core_ctl: module license 'BSD' taints kernel.
- [ 38.674531] Disabling lock debugging due to kernel taint
- [ 38.709314] init: Service 'exec 7 (/system/bin/bootstat)' (pid 4140) exited with status 0
- [ 39.547702] init: Starting service 'perfd'...
- [ 39.554159] init: Service 'qcom-post-boot' (pid 4116) exited with status 0
- [ 42.795701] type=1400 audit(130.509:5): avc: denied { read } for pid=4516 comm="RenderThread" name="gpuclk" dev="sysfs" ino=10917 scontext=u:r:untrusted_app:s0:c512,c768 tcontext=u:object_r:sysfs:s0 tclass=file permissive=0
- [ 44.233737] init: avc: granted { set } for property=net.lte.ims.data.enabled pid=3833 uid=1001 gid=1001 scontext=u:r:radio:s0 tcontext=u:object_r:net_radio_prop:s0 tclass=property_service
- [ 98.527265] type=1400 audit(186.239:6): avc: denied { read } for pid=4123 comm="dmclient" name="name" dev="sysfs" ino=10438 scontext=u:r:dmclient:s0 tcontext=u:object_r:sysfs:s0 tclass=file permissive=0
- [ 98.600120] type=1400 audit(186.309:7): avc: denied { search } for pid=4123 comm="dmclient" name="/" dev="mmcblk0p23" ino=2 scontext=u:r:dmclient:s0 tcontext=u:object_r:cache_file:s0 tclass=dir permissive=0
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement