tegra_log

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.10.96+ (root@toaster16) (gcc version 5.3.1 20160113 (Linaro GCC 5.3-2016.02) ) #2 SMP PREEMPT Wed Sep 28 15:22:56 NZDT 2016
[    0.000000] CPU: Cortex A57 Processor [411fd071] revision 1
[    0.000000] alternative: enabling workaround for ARM erratum 832075
[    0.000000] Machine: jetson_tx1
[    0.000000] bootconsole [earlycon0] enabled
[    0.000000] Reserved memory: initialized node iram-carveout, compatible id nvidia,iram-carveout
[    0.000000] Tegra reserved memory:
               LP0:                    ff2bf000 - ff2bffff
               Bootloader framebuffer: 00000000 - 00000000
               Bootloader framebuffer2: 00000000 - 00000000
               Framebuffer:            00000000 - 00000000
               2nd Framebuffer:        00000000 - 00000000
               Carveout:               00000000 - 00000000
               Vpr:                    00000000 - 16bfffff
               Tsec:                   00000000 - 00000000
               Bootloader Debug Data:  00000000 - 00000000
[    0.000000] Nvdumper:               ff23f000 - ff23ffff
[    0.000000] cma: CMA: reserved 364 MiB at e8000000
[    0.000000] cma: CMA: reserved 16 MiB at e7000000
[    0.000000] On node 0 totalpages: 1043968
[    0.000000]   DMA32 zone: 7168 pages used for memmap
[    0.000000]   DMA32 zone: 0 pages reserved
[    0.000000]   DMA32 zone: 519680 pages, LIFO batch:31
[    0.000000]   Normal zone: 7168 pages used for memmap
[    0.000000]   Normal zone: 524288 pages, LIFO batch:31
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv0.2 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] DTS File Name: arch/arm64/boot/dts/tegra210-jetson-tx1-p2597-2180-a01-devkit.dts
[    0.000000] DTB Build time: Sep 28 2016 12:07:55
[    0.000000] Tegra21: Speedo/IDDQ fuse revision 4
[    0.000000] Tegra21: CPU Speedo ID 7, Soc Speedo ID 0, Gpu Speedo ID 2
[    0.000000] Tegra21: CPU Process ID 0, Soc Process ID 0, Gpu Process ID 0
[    0.000000] Tegra21: CPU Speedo value 2003, Soc Speedo value 1923, Gpu Speedo value 2025
[    0.000000] Tegra21: CPU IDDQ 1668, Soc IDDQ 1916, Gpu IDDQ 2375
[    0.000000] Tegra Revision: A02 SKU: 0x17 CPU Process: 0 Core Process: 0 Bootrom patch v0x3f
[    0.000000] tegra: PLLP fixed rate: 408000000
[    0.000000] pll_u: boot with h/w control already set
[    0.000000] pll_x boot misc1 0x0 : expected 0x20
[    0.000000]  (comparison mask = 0xffffff)
[    0.000000] pll_c4 rates match 204000000 max sdmmc: vco=998400000 out0=998400000 out3=998400000
[    0.000000] Lowering vic03 maximum rate from 1000000000 to 627200000
[    0.000000] Lowering nvjpg maximum rate from 1000000000 to 627200000
[    0.000000] Lowering se maximum rate from 1000000000 to 627200000
[    0.000000] Lowering tsecb maximum rate from 1000000000 to 627200000
[    0.000000] Lowering msenc maximum rate from 1000000000 to 716800000
[    0.000000] Lowering nvdec maximum rate from 1000000000 to 716800000
[    0.000000] Lowering vi maximum rate from 1000000000 to 793600000
[    0.000000] Lowering isp maximum rate from 1000000000 to 793600000
[    0.000000] Lowering adsp_bus maximum rate from 1200000000 to 844800000
[    0.000000] Lowering sbus maximum rate from 600000000 to 408000000
[    0.000000] Lowering host1x maximum rate from 600000000 to 408000000
[    0.000000] Lowering pll_c maximum rate from 1200000000 to 1130000000
[    0.000000] Lowering pll_c2 maximum rate from 1200000000 to 1130000000
[    0.000000] Lowering pll_c3 maximum rate from 1200000000 to 1130000000
[    0.000000] Lowering pll_d2 maximum rate from 1500000000 to 1130000000
[    0.000000] Lowering pll_dp maximum rate from 1500000000 to 1130000000
[    0.000000] Lowering sor0 maximum rate from 600000000 to 540000000
[    0.000000] Lowering sor1 maximum rate from 600000000 to 594000000
[    0.000000] Lowering dmic1 maximum rate from 12288000 to 12190000
[    0.000000] Lowering dmic2 maximum rate from 12288000 to 12190000
[    0.000000] Lowering dmic3 maximum rate from 12288000 to 12190000
[    0.000000] Lowering hda maximum rate from 102000000 to 51000000
[    0.000000] Lowering sdmmc2 maximum rate from 266000000 to 204000000
[    0.000000] Lowering qspi maximum rate from 163200000 to 116600000
[    0.000000] Lowering gbus maximum rate from 1300000000 to 998400000
[    0.000000] Lowering cpu_g maximum rate from 3000000000 to 1734000000
[    0.000000] Lowering cpu_lp maximum rate from 1350000000 to 1132800000
[    0.000000] tegra dvfs: vdd_cpu: nominal 1226mV, offset 708000uV, step 19200uV, scaling enabled
[    0.000000] tegra dvfs: vdd_core: nominal 1125mV, offset 0uV, step 12500uV, scaling enabled
[    0.000000] tegra dvfs: vdd_gpu: nominal 1120mV, offset 710000uV, step 10000uV, scaling enabled
[    0.000000] Tegra reset control registration success
[    0.000000] tegra_powergate_init: DONE
[    0.000000] PERCPU: Embedded 13 pages/cpu @ffffffc01fe2d000 s20800 r8192 d24256 u53248
[    0.000000] pcpu-alloc: s20800 r8192 d24256 u53248 alloc=13*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 1029632
[    0.000000] Kernel command line: fbcon=map:0 console=tty0 console=ttyS0,115200n8 androidboot.modem=none androidboot.serialno=P2180A00P00940c003fd androidboot.security=non-secure tegraid=21.1.2.0.0 ddr_die=2048M@2048M ddr_die=2048M@4096M section=256M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff2bf000 nvdumper_reserved=0xff23f000 core_edp_mv=1125 core_edp_ma=4000 gpt android.kerneltype=normal androidboot.touch_vendor_id=0 androidboot.touch_panel_id=63 androidboot.touch_feature=0 androidboot.bootreason=pmc:software_reset,pmic:0x0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Memory: 2030MB 2048MB = 4078MB total
[    0.000000] Memory: 3690040k/3690040k available, 485832k reserved
[    0.000000] Virtual kernel memory layout:
                   vmalloc : 0xffffff8000000000 - 0xffffffbbffff0000   (245759 MB)
                   vmemmap : 0xffffffbc01c00000 - 0xffffffbc05400000   (    56 MB)
                   modules : 0xffffffbffc000000 - 0xffffffc000000000   (    64 MB)
                   memory  : 0xffffffc000000000 - 0xffffffc100000000   (  4096 MB)
                     .init : 0xffffffc00112f000 - 0xffffffc001198140   (   421 kB)
                     .text : 0xffffffc000080000 - 0xffffffc00112e3a4   ( 17081 kB)
                     .data : 0xffffffc0011ac000 - 0xffffffc00137a4b0   (  1850 kB)
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
[    0.000000] NR_IRQS:704 nr_irqs:704 0
[    0.000000] the number of interrupt controllers found is 6
[    0.000000] Architected local timer running at 19.20MHz (phys).
[    0.000000] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 3579139424256ns
[    0.000000] Console: colour dummy device 80x25
[    0.000000] console [tty0] enabled
[    0.000000] allocated 16777216 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.023622] Calibrating delay loop (skipped), value calculated using timer frequency.. lpj=192000
[    0.032431] pid_max: default: 32768 minimum: 301
[    0.037117] Security Framework initialized
[    0.041151] Mount-cache hash table entries: 256
[    0.085943] Initializing cgroup subsys debug
[    0.088226] Initializing cgroup subsys memory
[    0.092602] Initializing cgroup subsys devices
[    0.096974] Initializing cgroup subsys freezer
[    0.101402] Initializing cgroup subsys net_cls
[    0.105813] Initializing cgroup subsys blkio
[    0.110059] Initializing cgroup subsys perf_event
[    0.114927] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 7 counters available
[    0.160245] ftrace: Allocated trace_printk buffers
[    0.220779] Brought up 4 CPUs
[    0.221757] SMP: Total of 4 processors activated.
[    0.226448] alternatives: patching kernel code
[    0.233340] devtmpfs: initialized
[    0.243366] pinctrl core: initialized pinctrl subsystem
[    0.246819] regulator-dummy: ; Rail ON
[    0.256205] Initializing plugin-manager
[    0.258442] node /plugin-manager/fragment-e3326@0 match with board 3326-*
[    0.265980] NET: Registered protocol family 16
[    0.271222] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[    0.276755] console [pstore-1] enabled
[    0.279918] ramoops: attached 0x200000@0xff03f000, ecc: 0/0
[    0.285735] I2C first dynamic bus number based on alias = 7
[    0.291056] cpuidle: using governor ladder
[    0.295079] cpuidle: using governor menu
[    0.299708] PMC: Setting PMIC interrupt active-low
[    0.304401] tegra-pmc device create success
[    0.307960] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
[    0.315114] Clear bootloader IO dpd settings
[    0.319348] PMC: configuring io pad defaults
[    0.323773] PMC: IO pad audio voltage is 1800000
[    0.328286] PMC: IO pad cam voltage is 1800000
[    0.332714] PMC: IO pad dbg voltage is 1800000
[    0.337126] PMC: IO pad dmic voltage is 1800000
[    0.341641] PMC: IO pad pex-ctrl voltage is 1800000
[    0.346487] PMC: IO pad spi voltage is 1800000
[    0.350914] PMC: IO pad uart voltage is 1800000
[    0.355413] PMC: IO pad bb voltage is 1800000
[    0.359746] PMC: IO pad audio-hv voltage is 1800000
[    0.364608] PMC: IO pad spi-hv voltage is 1800000
[    0.369280] PMC: IO pad gpio voltage is 1800000
[    0.373795] PMC: IO pad sdmmc3 voltage is 1800000
[    0.378374] PMC: IO pad pex-bias power is disable
[    0.383060] PMC: IO pad pex-clk1 power is disable
[    0.387733] PMC: IO pad pex-clk2 power is disable
[    0.392411] T210 pmc padctrl driver initialized
[    0.396945] T210 pmc config for bootrom command passed
[    0.402940] INFO: pinmux CLAMP_INPUTS_WHEN_TRISTATED: disabled
[    0.409544] clk_init_from_dt_table: clocks are set from t210-clk-init-table:clkinit-0
[    0.417593] platform tegra-carveouts.23: SMMU isn't ready yet
[    0.421853] platform tegra-carveouts.23: domain=ffffffc0fe1e75d8 allocates as[0]=ffffffc0fe1d40a8
[    0.430241] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver
[    0.436771] bpmp: connect returned 0
[    0.440157] mapped MMIO address: 0xffffff8000038000 -> 0x70019000
[    0.445848] mapped MMIO address: 0xffffff800005e000 -> 0x7001c000
[    0.451925] mapped MMIO address: 0xffffff8000096000 -> 0x7001d000
[    0.458101] mc-err: (255) csr_mpcorer: non secure access to secure region
[    0.458795] Wake16 for irq=34
[    0.463382] tegra210-pinctrl 700008d4.pinmux: lookup the user state drive not found
[    0.463387] tegra210-pinctrl 700008d4.pinmux: lookup the user state unused not found
[    0.463391] tegra210-pinctrl 700008d4.pinmux: Probed Tegra pinctrl driver
[    0.463737] GPIO chip tegra-gpio: created GPIO range 0->245 ==> 700008d4.pinmux PIN 0->245
[    0.463778] tegra-gpio 6000d000.gpio: Initialising GPIO state 0: name wlan-default
[    0.463796] tegra-gpio 6000d000.gpio: Initialising GPIO state 1: name camera_control
[    0.463824] tegra-gpio 6000d000.gpio: Initialising GPIO state 2: name camera-control
[    0.463870] gpiochip_add: registered GPIOs 0 to 255 on device: tegra-gpio
[    0.465868] Wake44 for irq=81
[    0.465891] Wake40 for irq=53
[    0.465893] Wake41 for irq=53
[    0.465894] Wake42 for irq=53
[    0.465896] Wake43 for irq=53
[    0.466233] platform 70006000.serial: domain=ffffffc0fe1a07d8 allocates as[0]=ffffffc0fe1d4110
[    0.466857] platform sound.27: domain=ffffffc0fe1a0558 allocates as[0]=ffffffc0fe1d4178
[    0.468224] platform tegradc.1: domain=ffffffc0fe1a0158 allocates as[0]=ffffffc0fe1d41e0
[    0.468490] platform tegradc.1: IOVA linear map 0x00000000e8000000(16c00000)
[    0.469904] platform gpu.0: domain=ffffffc0fe264dd8 allocates as[0]=ffffffc0fe1d4248
[    0.469943] platform gpu.0: domain=ffffffc0fe264dd8 allocates as[1]=ffffffc0fe1d42b0
[    0.469978] platform gpu.0: domain=ffffffc0fe264dd8 allocates as[2]=ffffffc0fe1d4318
[    0.470009] platform gpu.0: domain=ffffffc0fe264dd8 allocates as[3]=ffffffc0fe1d4380
[    0.471374] platform 1003000.pcie-controller: domain=ffffffc0fe264bd8 allocates as[0]=ffffffc0fe1d43e8
[    0.472621] platform sdhci-tegra.3: domain=ffffffc0fe264758 allocates as[0]=ffffffc0fe1d4450
[    0.472919] platform sdhci-tegra.0: domain=ffffffc0fe264558 allocates as[0]=ffffffc0fe1d44b8
[    0.473100] Wake39 for irq=52
[    0.478478] gpio wake52 for gpio=61
[    0.478663] gpio wake8 for gpio=58
[    0.478693] gpio wake8 for gpio=58
[    0.479479] irq: no irq domain found for /soctherm@0x700E2000 !
[    0.479592] irq: no irq domain found for /soctherm@0x700E2000 !
[    0.479734] board_info: id:sku:fab:major:minor = 0x0884:0x03e8:0x00:0x00:0x00
[    0.479750] PMC dt information non-NULL tegra_init_suspend
[    0.484589] Loading EMC tables...
[    0.484673] tegra: Using EMC sequence '21021' for Rev. 7 tables
[    0.484685] tegra: emc: Derated table is valid.
[    0.484697] Lowering emc maximum rate from 1800000000 to 1600000000
[    0.484707] tegra: validated EMC DFS table
[    0.490255] swapper/0 isomgr_init(): iso emc max clk=1600000KHz
[    0.490258] swapper/0 isomgr_init(): max_iso_bw=11520000KB
[    0.490431] vdso: 2 pages (1 code, 1 data) at base ffffffc0011b2000
[    0.490447] vdso32: 2 pages (1 code, 1 data) at base ffffffc0011b1000
[    0.716548] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.716563] mc-err:   status = 0x30007027; addr = 0xffffffc0
[    0.716568] mc-err:   secure: no, access-type: read, SMMU fault: none
[    0.735478] nvdumper: last reboot was unknown
[    0.739688] nvdumper: set_dirty_state 0x2badface
[    0.744627] Tegra restart notifier registered.
[    0.755810] bio: create slab <bio-0> at 0
[    0.759043] vdd-ac-bat: 5000 mV ; Rail ON
[    0.761978] vdd-cpu-fixed: 1000 mV ; Rail ON
[    0.766497] vgaarb: loaded
[    0.769019] SCSI subsystem initialized
[    0.772517] libata version 3.00 loaded.
[    0.772642] usbcore: registered new interface driver usbfs
[    0.777958] usbcore: registered new interface driver hub
[    0.783301] usbcore: registered new device driver usb
[    0.788813] gpio wake33 for gpio=188
[    0.793067] regulator_get() failed for (1-0074,vcc), -19
[    0.797092] pca953x 1-0074: no regulator found for vcc. Assuming vcc is always powered
[    0.805668] gpio wake21 for gpio=89
[    0.808545] gpiochip_add: registered GPIOs 1008 to 1023 on device: tca9539
[    0.815540] regulator_get() failed for (1-0077,vcc), -19
[    0.820588] pca953x 1-0077: no regulator found for vcc. Assuming vcc is always powered
[    0.829132] gpio wake36 for gpio=202
[    0.832114] gpiochip_add: registered GPIOs 992 to 1007 on device: tca9539
[    0.839159] i2c i2c-3: of_i2c: modalias failure on /i2c@7000c700/prod-settings
[    0.846780] max77620 4-003c: CID0: 0xa2
[    0.849863] max77620 4-003c: CID1: 0x1a
[    0.853688] max77620 4-003c: CID2: 0x15
[    0.857486] max77620 4-003c: CID3: 0x59
[    0.861313] max77620 4-003c: CID4: 0x35
[    0.865112] max77620 4-003c: CID5: 0x80
[    0.868926] max77620 4-003c: MAX77620 PMIC OTP Version is 0x35
[    0.875999] max77620-pmic max77620-pmic: Consumer c2 does not have device name
[    0.882804] vdd_core: 600 <--> 1400 mV at 1000 mV with ramp delay 27500 uV/us ; Rail ON
[    0.890601] vddio-ddr: at 1125 mV with ramp delay 27500 uV/us ; Rail ON
[    0.896909] vdd-pre-reg: 1350 mV with ramp delay 27500 uV/us ; Rail ON
[    0.903905] vdd-1v8: 1800 mV with ramp delay 27500 uV/us ; Rail ON
[    0.909727] avdd-sys: 1200 mV with ramp delay 100000 uV/us ; Rail ON
[    0.915455] avdd-sys: supplied by vdd-pre-reg
[    0.920296] vdd-pex: 1050 mV with ramp delay 100000 uV/us ; Rail ON
[    0.926001] vdd-pex: supplied by vdd-pre-reg
[    0.930578] vddio-sdmmc1: 1800 <--> 3300 mV at 3300 mV with ramp delay 100000 uV/us ; Rail ON
[    0.939124] vdd-cam-hv: 2800 mV with ramp delay 100000 uV/us ; Rail OFF
[    0.945840] vdd-rtc: 850 mV with ramp delay 100000 uV/us ; Rail ON
[    0.951874] avdd-ts-hv: 3300 mV with ramp delay 100000 uV/us ; Rail OFF
[    0.959122] vdd-ts: 1800 mV with ramp delay 100000 uV/us ; Rail OFF
[    0.964943] vdd-gen-pll-edp: 1050 mV with ramp delay 100000 uV/us ; Rail ON
[    0.971258] vdd-gen-pll-edp: supplied by vdd-pre-reg
[    0.976758] vdd-hdmi-dp: 1050 mV with ramp delay 100000 uV/us ; Rail ON
[    0.982778] vdd-hdmi-dp: supplied by vdd-pre-reg
[    0.987707] max77620-gpio max77620-gpio.0: Initialising GPIO state 1: name gpio_default
[    0.995363] gpiochip_add: registered GPIOs 984 to 991 on device: max77620-gpio
[    1.003476] max77620-gpio max77620-gpio.0: max77620 gpio successfully initialized
[    1.012820] max77620 4-003c: max77620 probe successfully
[    1.016644] media: Linux media interface: v0.10
[    1.020686] Linux video capture interface: v2.00
[    1.025623] pps_core: LinuxPPS API ver. 1 registered
[    1.030190] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    1.039289] PTP clock support registered
[    1.043487] Tegra WDT enabled on probe. Timeout = 120 seconds.
[    1.049161] tegra_wdt 60005100.watchdog: tegra_wdt_probe done
[    1.055876] Advanced Linux Sound Architecture Driver Initialized.
[    1.061089] Bluetooth: Core ver 2.16
[    1.064341] NET: Registered protocol family 31
[    1.068740] Bluetooth: HCI device and connection manager initialized
[    1.075087] Bluetooth: HCI socket layer initialized
[    1.079923] Bluetooth: L2CAP socket layer initialized
[    1.084968] Bluetooth: SCO socket layer initialized
[    1.090918] vdd-3v3: 3300 mV ; Rail ON
[    1.094656] max77620-gpio7: 1050 mV ; Rail ON
[    1.097898] max77620-gpio7: supplied by vdd-gen-pll-edp
[    1.103275] lcd-bl-en: 1800 mV ; Rail ON
[    1.107120] en-vdd-sd: 3300 mV ; Rail OFF
[    1.111006] en-vdd-sd: supplied by vdd-3v3
[    1.115125] reg-fixed-sync-voltage 5.regulator: Consumer c1 does not have device name
[    1.123185] en-vdd-cam: 1800 mV ; Rail OFF
[    1.133531] vdd-sys-boost: 5000 mV ; Rail ON
[    1.136232] vdd-hdmi: 5000 mV ; Rail OFF
[    1.139740] vdd-hdmi: supplied by vdd-3v3
[    1.143850] aux-3v3: 3300 mV ; Rail ON
[    1.147542] snsr_pm: 3300 mV ; Rail ON
[    1.151781] vdd-disp-3v0: 3000 mV ; Rail ON
[    1.155720] vdd-fan: 5000 mV ; Rail OFF
[    1.159270] usb-vbus1: 5000 mV ; Rail OFF
[    1.163152] usb-vbus1: supplied by vdd-3v3
[    1.167357] usb-vbus3: 5000 mV ; Rail OFF
[    1.171217] usb-vbus3: supplied by vdd-3v3
[    1.175669] en-vdd-ts-1v8: 1800 mV ; Rail OFF
[    1.179985] en-vdd-ts-hv-3v3: 3300 mV ; Rail OFF
[    1.184722] en-vdd-disp-3v3: 3300 mV ; Rail ON
[    1.188986] en-mdm-pwr-3v7: ; Rail OFF
[    1.192864] en-vdd-disp-1v8: 1800 mV ; Rail ON
[    1.196813] reg-fixed-sync-voltage ce.regulator: Consumer c0 does not have device name
[    1.204975] en-vdd-cam-hv-2v8: ; Rail OFF
[    1.208781] rtl-5v0: ; Rail OFF
[    1.211888] en-usb-vbus2: ; Rail OFF
[    1.215688] en-vdd-cam-1v2: ; Rail OFF
[    1.219042] en-vdd-cam-1v2: supplied by vdd-3v3
[    1.223680] en-vdd-vcm-2v8: ; Rail ON
[    1.227184] en-vdd-vcm-2v8: supplied by vdd-3v3
[    1.232098] en-vdd-cam-1v2-alt: ; Rail OFF
[    1.236221] regulator-pwm 0.pwm-regulator: PWM request deferred
[    1.241649] platform 0.pwm-regulator: Driver regulator-pwm requests probe deferral
[    1.249619] vdd_gpu: applied init 1000000uV constraint
[    1.254295] vdd_gpu: 710 <--> 1320 mV at 1000 mV ; Rail OFF
[    1.260254] vdd_cpu: applied init 1000000uV constraint
[    1.264943] vdd_cpu: 708 <--> 1322 mV at 1000 mV normal ; Rail ON
[    1.271554] gpio wake34 for gpio=200
[    1.275724] extcon-gpio-states 1.extcon: Cable state 1
[    1.281119] Switching to clocksource arch_sys_counter
[    1.298367] nvmap_heap_init: nvmap_heap_init: created heap block cache
[    1.303070] tegra-carveouts tegra-carveouts.23: iram :dma coherent mem declare 0x0000000040001000,258048
[    1.312381] tegra-carveouts tegra-carveouts.23: assigned reserved memory node iram-carveout
[    1.320683] dma_declare_coherent_resizable_cma_memory:278: resizable heap=vpr, base=0x0x00000000e8000000, size=0x16c00000
[    1.331605]  dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (12) rem_chunk_size(0xc00000)
[    1.342315] cma: enabled page replacement for spfn=e8000, epfn=fec00
[    1.348501] dma_declare_coherent_resizable_cma_memory:325: resizable cma heap=vpr create successful
[    1.357339] nvmap_page_pool_init: Total RAM pages: 1019790
[    1.362958] nvmap_page_pool_init: nvmap page pool size: 127473 pages (497 MB)
[    1.370128] nvmap_background_zero_thread: PP zeroing thread starting.
[    1.377042] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB)
[    1.384231] misc nvmap: created heap vpr base 0x00000000e8000000 size (372736KiB)
[    1.391360] nvmap:inner cache maint threshold=2097152
[    1.402460] Wake39 for irq=52
[    1.403622] Could not add tegra-otg to power domain using device tree
[    1.410077] tegra-otg tegra-otg: otg transceiver registered
[    1.415874] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm
[    1.424664] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm
[    1.432534] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm
[    1.440820] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
[    1.449214] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die
[    1.458201] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type Tdiode_tegra
[    1.466230] thermal thermal_zone6: Registering thermal zone thermal_zone6 for type Tboard_tegra
[    1.475365] tegra21_plle_clk_enable: pll_e is already enabled
[    1.480493] t210_sata_uphy_pll_init: init sata uphy pll
[    1.485699] t210_sata_uphy_pll_init SATA uses SATA Lane
[    1.491189] tegra_xusb_padctl_phy_enable: init pex uphy pll
[    1.497633] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sys is having fixed voltage 1800000
[    1.505345] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-uart is having fixed voltage 1800000
[    1.514255] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-audio is having fixed voltage 1800000
[    1.523274] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-cam is having fixed voltage 1800000
[    1.532118] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-pex-ctrl is having fixed voltage 1800000
[    1.541396] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sdmmc1 is having voltages: 1800000:3300000
[    1.550839] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sdmmc3 is having fixed voltage 1800000
[    1.559938] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sdmmc4 is having fixed voltage 1800000
[    1.569038] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-audio-hv is having fixed voltage 1800000
[    1.578313] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-debug is having fixed voltage 1800000
[    1.587320] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-dmic is having fixed voltage 1800000
[    1.596253] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-gpio is having fixed voltage 1800000
[    1.605177] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-spi is having fixed voltage 1800000
[    1.614003] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-spi-hv is having fixed voltage 1800000
[    1.623117] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-sdmmc2 is having fixed voltage 1800000
[    1.632217] tegra210-pmc-iopower pmc-iopower.29: Rail iopower-dp is having fixed voltage 1800000
[    1.640920] tegra210-pmc-iopower pmc-iopower.29: NO_IO_POWER setting 0x0
[    1.647773] NET: Registered protocol family 2
[    1.652480] TCP established hash table entries: 32768 (order: 7, 524288 bytes)
[    1.659273] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    1.665882] TCP: Hash tables configured (established 32768 bind 32768)
[    1.672247] TCP: reno registered
[    1.675414] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.681399] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.688002] NET: Registered protocol family 1
[    1.692380] RPC: Registered named UNIX socket transport module.
[    1.698030] RPC: Registered udp transport module.
[    1.702690] RPC: Registered tcp transport module.
[    1.707379] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    1.713789] PCI: CLS 0 bytes, default 64
[    1.714095] tegra-fuse tegra-fuse: Fuse driver initialized succesfully
[    1.720622] Trying to unpack rootfs image as initramfs...
[    1.995136] Freeing initrd memory: 10576K (ffffffc003100000 - ffffffc003b54000)
[    2.004061] host1x host1x: initialized
[    2.009432] NTFS driver 2.1.30 [Flags: R/O].
[    2.011861] fuse init (API version 7.22)
[    2.015760] msgmni has been set to 7987
[    2.020393] io scheduler noop registered (default)
[    2.024318] Tegra cpuquiet initialized: disabled
[    2.030365] tegra-pcie 1003000.pcie-controller: PCIE: Enable power rails
[    2.036365] tegra-pcie 1003000.pcie-controller: probing port 0, using 4 lanes and lane map as 0x14
[    2.046435] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes and lane map as 0x14
[    2.076559] tegra-pcie 1003000.pcie-controller: link 1 down, ignoring
[    2.081099] tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
[    2.088234] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
[    2.095056] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
[    2.102324] pci_bus 0000:00: root bus resource [bus 00-ff]
[    2.107808] pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
[    2.113964] pci 0000:00:01.0: [10de:0fae] type 01 class 0x060400
[    2.114042] pci 0000:00:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.114218] pci 0000:00:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    2.122060] pci 0000:01:00.0: [12d8:2608] type 01 class 0x060400
[    2.122186] pci 0000:01:00.0: supports D1 D2
[    2.122193] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.134799] pci 0000:01:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    2.140971] pci 0000:02:01.0: [12d8:2608] type 01 class 0x060400
[    2.141094] pci 0000:02:01.0: supports D1 D2
[    2.141101] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.141240] pci 0000:02:02.0: [12d8:2608] type 01 class 0x060400
[    2.141361] pci 0000:02:02.0: supports D1 D2
[    2.141368] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.141505] pci 0000:02:03.0: [12d8:2608] type 01 class 0x060400
[    2.141625] pci 0000:02:03.0: supports D1 D2
[    2.141632] pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.141768] pci 0000:02:04.0: [12d8:2608] type 01 class 0x060400
[    2.141888] pci 0000:02:04.0: supports D1 D2
[    2.141894] pci 0000:02:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    2.142180] pci 0000:02:01.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    2.148819] pci 0000:02:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    2.156775] pci 0000:02:03.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    2.164756] pci 0000:02:04.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[    2.172854] pci 0000:03:00.0: [1b4b:9215] type 00 class 0x010601
[    2.172882] pci 0000:03:00.0: reg 10: [io  0x8000-0x8007]
[    2.172903] pci 0000:03:00.0: reg 14: [io  0x8040-0x8043]
[    2.172923] pci 0000:03:00.0: reg 18: [io  0x8100-0x8107]
[    2.172943] pci 0000:03:00.0: reg 1c: [io  0x8140-0x8143]
[    2.172963] pci 0000:03:00.0: reg 20: [io  0x800000-0x80001f]
[    2.172983] pci 0000:03:00.0: reg 24: [mem 0x00900000-0x009007ff]
[    2.173004] pci 0000:03:00.0: reg 30: [mem 0xd0000000-0xd000ffff pref]
[    2.173081] pci 0000:03:00.0: PME# supported from D3hot
[    2.184816] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 03
[    2.184995] pci 0000:04:00.0: [1b4b:9215] type 00 class 0x010601
[    2.185022] pci 0000:04:00.0: reg 10: [io  0x8000-0x8007]
[    2.185043] pci 0000:04:00.0: reg 14: [io  0x8040-0x8043]
[    2.185063] pci 0000:04:00.0: reg 18: [io  0x8100-0x8107]
[    2.185083] pci 0000:04:00.0: reg 1c: [io  0x8140-0x8143]
[    2.185103] pci 0000:04:00.0: reg 20: [io  0x800000-0x80001f]
[    2.185123] pci 0000:04:00.0: reg 24: [mem 0x00900000-0x009007ff]
[    2.185143] pci 0000:04:00.0: reg 30: [mem 0xd0000000-0xd000ffff pref]
[    2.185221] pci 0000:04:00.0: PME# supported from D3hot
[    2.204814] pci_bus 0000:04: busn_res: [bus 04-ff] end is updated to 04
[    2.204980] pci 0000:05:00.0: [1b4b:9215] type 00 class 0x010601
[    2.205007] pci 0000:05:00.0: reg 10: [io  0x8000-0x8007]
[    2.205027] pci 0000:05:00.0: reg 14: [io  0x8040-0x8043]
[    2.205047] pci 0000:05:00.0: reg 18: [io  0x8100-0x8107]
[    2.205067] pci 0000:05:00.0: reg 1c: [io  0x8140-0x8143]
[    2.205087] pci 0000:05:00.0: reg 20: [io  0x800000-0x80001f]
[    2.205108] pci 0000:05:00.0: reg 24: [mem 0x00900000-0x009007ff]
[    2.205128] pci 0000:05:00.0: reg 30: [mem 0xd0000000-0xd000ffff pref]
[    2.205206] pci 0000:05:00.0: PME# supported from D3hot
[    2.224812] pci_bus 0000:05: busn_res: [bus 05-ff] end is updated to 05
[    2.224973] pci 0000:06:00.0: [1b4b:9215] type 00 class 0x010601
[    2.225000] pci 0000:06:00.0: reg 10: [io  0x8000-0x8007]
[    2.225021] pci 0000:06:00.0: reg 14: [io  0x8040-0x8043]
[    2.225041] pci 0000:06:00.0: reg 18: [io  0x8100-0x8107]
[    2.225061] pci 0000:06:00.0: reg 1c: [io  0x8140-0x8143]
[    2.225081] pci 0000:06:00.0: reg 20: [io  0x800000-0x80001f]
[    2.225101] pci 0000:06:00.0: reg 24: [mem 0x00900000-0x009007ff]
[    2.225122] pci 0000:06:00.0: reg 30: [mem 0xd0000000-0xd000ffff pref]
[    2.225200] pci 0000:06:00.0: PME# supported from D3hot
[    2.244812] pci_bus 0000:06: busn_res: [bus 06-ff] end is updated to 06
[    2.244826] pci_bus 0000:02: busn_res: [bus 02-ff] end is updated to 06
[    2.244838] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 06
[    2.245176] pci 0000:00:01.0: BAR 8: assigned [mem 0x13000000-0x137fffff]
[    2.249970] pci 0000:00:01.0: BAR 9: assigned [mem 0x20000000-0x207fffff pref]
[    2.257177] pci 0000:00:01.0: BAR 7: assigned [io  0x1000-0x4fff]
[    2.263228] pci 0000:01:00.0: BAR 8: assigned [mem 0x13000000-0x137fffff]
[    2.270015] pci 0000:01:00.0: BAR 9: assigned [mem 0x20000000-0x207fffff pref]
[    2.277192] pci 0000:01:00.0: BAR 7: assigned [io  0x1000-0x4fff]
[    2.283256] pci 0000:02:01.0: BAR 8: assigned [mem 0x13000000-0x131fffff]
[    2.290032] pci 0000:02:01.0: BAR 9: assigned [mem 0x20000000-0x201fffff pref]
[    2.297213] pci 0000:02:02.0: BAR 8: assigned [mem 0x13200000-0x133fffff]
[    2.303959] pci 0000:02:02.0: BAR 9: assigned [mem 0x20200000-0x203fffff pref]
[    2.311177] pci 0000:02:03.0: BAR 8: assigned [mem 0x13400000-0x135fffff]
[    2.317924] pci 0000:02:03.0: BAR 9: assigned [mem 0x20400000-0x205fffff pref]
[    2.325130] pci 0000:02:04.0: BAR 8: assigned [mem 0x13600000-0x137fffff]
[    2.331866] pci 0000:02:04.0: BAR 9: assigned [mem 0x20600000-0x207fffff pref]
[    2.339071] pci 0000:02:01.0: BAR 7: assigned [io  0x1000-0x1fff]
[    2.345148] pci 0000:02:02.0: BAR 7: assigned [io  0x2000-0x2fff]
[    2.351191] pci 0000:02:03.0: BAR 7: assigned [io  0x3000-0x3fff]
[    2.357269] pci 0000:02:04.0: BAR 7: assigned [io  0x4000-0x4fff]
[    2.363330] pci 0000:03:00.0: BAR 6: assigned [mem 0x20000000-0x2000ffff pref]
[    2.370546] pci 0000:03:00.0: BAR 5: assigned [mem 0x13000000-0x130007ff]
[    2.377294] pci 0000:03:00.0: BAR 4: assigned [io  0x1000-0x101f]
[    2.383349] pci 0000:03:00.0: BAR 0: assigned [io  0x1020-0x1027]
[    2.389439] pci 0000:03:00.0: BAR 2: assigned [io  0x1028-0x102f]
[    2.395496] pci 0000:03:00.0: BAR 1: assigned [io  0x1030-0x1033]
[    2.401548] pci 0000:03:00.0: BAR 3: assigned [io  0x1034-0x1037]
[    2.407641] pci 0000:02:01.0: PCI bridge to [bus 03]
[    2.412552] pci 0000:02:01.0:   bridge window [io  0x1000-0x1fff]
[    2.418638] pci 0000:02:01.0:   bridge window [mem 0x13000000-0x131fffff]
[    2.425404] pci 0000:02:01.0:   bridge window [mem 0x20000000-0x201fffff pref]
[    2.432582] pci 0000:04:00.0: BAR 6: assigned [mem 0x20200000-0x2020ffff pref]
[    2.439778] pci 0000:04:00.0: BAR 5: assigned [mem 0x13200000-0x132007ff]
[    2.446553] pci 0000:04:00.0: BAR 4: assigned [io  0x2000-0x201f]
[    2.452595] pci 0000:04:00.0: BAR 0: assigned [io  0x2020-0x2027]
[    2.458673] pci 0000:04:00.0: BAR 2: assigned [io  0x2028-0x202f]
[    2.464752] pci 0000:04:00.0: BAR 1: assigned [io  0x2030-0x2033]
[    2.470795] pci 0000:04:00.0: BAR 3: assigned [io  0x2034-0x2037]
[    2.476873] pci 0000:02:02.0: PCI bridge to [bus 04]
[    2.481798] pci 0000:02:02.0:   bridge window [io  0x2000-0x2fff]
[    2.487891] pci 0000:02:02.0:   bridge window [mem 0x13200000-0x133fffff]
[    2.494627] pci 0000:02:02.0:   bridge window [mem 0x20200000-0x203fffff pref]
[    2.501840] pci 0000:05:00.0: BAR 6: assigned [mem 0x20400000-0x2040ffff pref]
[    2.509037] pci 0000:05:00.0: BAR 5: assigned [mem 0x13400000-0x134007ff]
[    2.515787] pci 0000:05:00.0: BAR 4: assigned [io  0x3000-0x301f]
[    2.521842] pci 0000:05:00.0: BAR 0: assigned [io  0x3020-0x3027]
[    2.527932] pci 0000:05:00.0: BAR 2: assigned [io  0x3028-0x302f]
[    2.533975] pci 0000:05:00.0: BAR 1: assigned [io  0x3030-0x3033]
[    2.540053] pci 0000:05:00.0: BAR 3: assigned [io  0x3034-0x3037]
[    2.546133] pci 0000:02:03.0: PCI bridge to [bus 05]
[    2.551045] pci 0000:02:03.0:   bridge window [io  0x3000-0x3fff]
[    2.557125] pci 0000:02:03.0:   bridge window [mem 0x13400000-0x135fffff]
[    2.563873] pci 0000:02:03.0:   bridge window [mem 0x20400000-0x205fffff pref]
[    2.571099] pci 0000:06:00.0: BAR 6: assigned [mem 0x20600000-0x2060ffff pref]
[    2.578272] pci 0000:06:00.0: BAR 5: assigned [mem 0x13600000-0x136007ff]
[    2.585046] pci 0000:06:00.0: BAR 4: assigned [io  0x4000-0x401f]
[    2.591088] pci 0000:06:00.0: BAR 0: assigned [io  0x4020-0x4027]
[    2.597166] pci 0000:06:00.0: BAR 2: assigned [io  0x4028-0x402f]
[    2.603221] pci 0000:06:00.0: BAR 1: assigned [io  0x4030-0x4033]
[    2.609312] pci 0000:06:00.0: BAR 3: assigned [io  0x4034-0x4037]
[    2.615367] pci 0000:02:04.0: PCI bridge to [bus 06]
[    2.620291] pci 0000:02:04.0:   bridge window [io  0x4000-0x4fff]
[    2.626384] pci 0000:02:04.0:   bridge window [mem 0x13600000-0x137fffff]
[    2.633121] pci 0000:02:04.0:   bridge window [mem 0x20600000-0x207fffff pref]
[    2.640328] pci 0000:01:00.0: PCI bridge to [bus 02-06]
[    2.645535] pci 0000:01:00.0:   bridge window [io  0x1000-0x4fff]
[    2.651581] pci 0000:01:00.0:   bridge window [mem 0x13000000-0x137fffff]
[    2.658351] pci 0000:01:00.0:   bridge window [mem 0x20000000-0x207fffff pref]
[    2.665561] pci 0000:00:01.0: PCI bridge to [bus 01-06]
[    2.670731] pci 0000:00:01.0:   bridge window [io  0x1000-0x4fff]
[    2.676814] pci 0000:00:01.0:   bridge window [mem 0x13000000-0x137fffff]
[    2.683559] pci 0000:00:01.0:   bridge window [mem 0x20000000-0x207fffff pref]
[    2.690781] PCI: enabling device 0000:00:01.0 (0140 -> 0143)
[    2.696404] PCI: enabling device 0000:01:00.0 (0140 -> 0143)
[    2.702025] PCI: enabling device 0000:02:01.0 (0140 -> 0143)
[    2.707683] PCI: enabling device 0000:02:02.0 (0140 -> 0143)
[    2.713293] PCI: enabling device 0000:02:03.0 (0140 -> 0143)
[    2.718936] PCI: enabling device 0000:02:04.0 (0140 -> 0143)
[    2.724758] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[    2.731487] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[    2.737995] pci 0000:02:01.0: Signaling PME through PCIe PME interrupt
[    2.744484] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[    2.751007] pci 0000:02:02.0: Signaling PME through PCIe PME interrupt
[    2.757495] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[    2.763983] pci 0000:02:03.0: Signaling PME through PCIe PME interrupt
[    2.770507] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[    2.776995] pci 0000:02:04.0: Signaling PME through PCIe PME interrupt
[    2.783484] pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
[    2.790010] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[    2.790120] aer 0000:00:01.0:pcie02: service driver aer loaded
[    2.794072] tsec tsec: initialized
[    2.796425] tsec tsecb: initialized
[    2.800573] nvdec nvdec: initialized
[    2.804836] falcon vic03: initialized
[    2.807748] falcon msenc: initialized
[    2.811115] falcon nvjpg: initialized
[    2.814616] tegradc tegradc.1: Display dc.54240000 registered with id=0
[    2.820394] of_dc_parse_platform_data: DC OR node is connected to /host1x/sor1
[    2.827741] display board info: id 0x0, fab 0x0
[    2.832697] display board info: id 0x0, fab 0x0
[    2.836932] invalid panel compatible
[    2.840134] parse_tmds_config: No tmds-config node
[    2.845032] of_dc_parse_platform_data: could not find vrr-settings node
[    2.851486] of_dc_parse_platform_data: nvidia,hdmi-vrr-caps not present
[    2.858154] of_dc_parse_platform_data: could not find SD settings node
[    2.864572] of_dc_parse_platform_data: could not find cmu node
[    2.870404] of_dc_parse_platform_data: could not find cmu node for adobeRGB
[    2.877330] tegradc tegradc.1: DT parsed successfully
[    2.883324] display board info: id 0x0, fab 0x0
[    2.887439] gpio wake53 for gpio=225
[    2.938414] tegradc tegradc.1: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000
[    3.297484] tegradc tegradc.1: probed
[    3.376761] Console: switching to colour frame buffer device 240x67
[    3.382064] tegradc tegradc.1: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000
[    3.411163] tegradc tegradc.1: fb registered
[    3.415992] tegra_camera_platform tegra-camera-platform.45: tegra_camera_probe:camera_platform_driver probe
[    3.425291] misc tegra_camera_ctrl: tegra_camera_isomgr_register camera's max_iso_bw 3600000
[    3.435610] tegra-apbdma tegra-apbdma: Tegra20 APB DMA driver register 32 channels
[    3.442376] tegra-adma tegra210-adma: Tegra210 ADMA driver register 10 channels
[    3.448834] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    3.455851] of_serial 70006000.serial: RX periodic polling enabled
[    3.461190] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 68) is a Tegra
[    3.468006] console [ttyS0] enabled, bootconsole disabled
[    3.478770] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 69) is a SERIAL_TEGRA
[    3.488646] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 78) is a SERIAL_TEGRA
[    3.496644] serial-tegra 70006300.serial: RX in PIO mode
[    3.502032] 70006300.serial: ttyTHS3 at MMIO 0x70006300 (irq = 122) is a SERIAL_TEGRA
[    3.528277] brd: module loaded
[    3.533556] loop: module loaded
[    3.537066] zram: Created 1 device(s) ...
[    3.541276] tegradc tegradc.1: vrr_setup failed
[    3.545947] nct1008_nct72 0-004c: find device tree node, parsing dt
[    3.545951] nct1008_nct72 0-004c: starting parse dt
[    3.554821] nct1008_nct72 0-004c: success parsing dt
[    3.554950] nct1008_nct72 0-004c: success in enabling rail vdd_nct72
[    3.566629] tegradc tegradc.1: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000
[    3.597304] tegradc tegradc.1: blank - normal
[    3.614035] tegradc tegradc.1: unblank
[    3.626183] NCT72: Enabled overheat logging at 104.00C
[    3.626270] gpio wake33 for gpio=188
[    3.626328] nct1008_nct72 0-004c: nct1008_probe: initialized
[    3.628725] THERMAL EST start of therm_fan_est_probe.
[    3.628786] THERMAL EST: found 2 subdevs
[    3.628788] THERMAL EST name: thermal-fan-est.
[    3.628790] THERMAL EST num_resources: 0
[    3.628793] [THERMAL EST subdev 0]
[    3.628796] THERMAL EST subdev name: CPU-therm
[    3.628799] THERMAL EST index 0 coeffs 50
[    3.628801] THERMAL EST index 1 coeffs 0
[    3.628802] THERMAL EST index 2 coeffs 0
[    3.628804] THERMAL EST index 3 coeffs 0
[    3.628805] THERMAL EST index 4 coeffs 0
[    3.628807] THERMAL EST index 5 coeffs 0
[    3.628808] THERMAL EST index 6 coeffs 0
[    3.628810] THERMAL EST index 7 coeffs 0
[    3.628811] THERMAL EST index 8 coeffs 0
[    3.628813] THERMAL EST index 9 coeffs 0
[    3.628814] [THERMAL EST subdev 1]
[    3.628817] THERMAL EST subdev name: GPU-therm
[    3.628819] THERMAL EST index 0 coeffs 50
[    3.628821] THERMAL EST index 1 coeffs 0
[    3.628822] THERMAL EST index 2 coeffs 0
[    3.628824] THERMAL EST index 3 coeffs 0
[    3.628825] THERMAL EST index 4 coeffs 0
[    3.628827] THERMAL EST index 5 coeffs 0
[    3.628828] THERMAL EST index 6 coeffs 0
[    3.628830] THERMAL EST index 7 coeffs 0
[    3.628831] THERMAL EST index 8 coeffs 0
[    3.628832] THERMAL EST index 9 coeffs 0
[    3.628837] THERMAL EST index 0: trip_temp 0, hyst 0
[    3.628839] THERMAL EST index 1: trip_temp 51000, hyst 15000
[    3.628842] THERMAL EST index 2: trip_temp 61000, hyst 9000
[    3.628844] THERMAL EST index 3: trip_temp 71000, hyst 9000
[    3.628846] THERMAL EST index 4: trip_temp 82000, hyst 10000
[    3.628848] THERMAL EST index 5: trip_temp 140000, hyst 0
[    3.628850] THERMAL EST index 6: trip_temp 150000, hyst 0
[    3.628852] THERMAL EST index 7: trip_temp 160000, hyst 0
[    3.628854] THERMAL EST index 8: trip_temp 170000, hyst 0
[    3.628855] THERMAL EST index 9: trip_temp 180000, hyst 0
[    3.628857] THERMAL EST index 0: trip_temps_hyst 0
[    3.628859] THERMAL EST index 1: trip_temps_hyst 36000
[    3.628861] THERMAL EST index 2: trip_temps_hyst 51000
[    3.628862] THERMAL EST index 3: trip_temps_hyst 52000
[    3.628864] THERMAL EST index 4: trip_temps_hyst 61000
[    3.628865] THERMAL EST index 5: trip_temps_hyst 62000
[    3.628867] THERMAL EST index 6: trip_temps_hyst 71000
[    3.628868] THERMAL EST index 7: trip_temps_hyst 72000
[    3.628870] THERMAL EST index 8: trip_temps_hyst 82000
[    3.628871] THERMAL EST index 9: trip_temps_hyst 140000
[    3.628873] THERMAL EST index 10: trip_temps_hyst 140000
[    3.628875] THERMAL EST index 11: trip_temps_hyst 150000
[    3.628877] THERMAL EST index 12: trip_temps_hyst 150000
[    3.628878] THERMAL EST index 13: trip_temps_hyst 160000
[    3.628880] THERMAL EST index 14: trip_temps_hyst 160000
[    3.628882] THERMAL EST index 15: trip_temps_hyst 170000
[    3.628883] THERMAL EST index 16: trip_temps_hyst 170000
[    3.628885] THERMAL EST index 17: trip_temps_hyst 180000
[    3.628887] THERMAL EST index 18: trip_temps_hyst 180000
[    3.628888] THERMAL EST index 19: trip_temps_hyst 0
[    3.628890] THERMAL EST index 20: trip_temps_hyst 0
[    3.628893] THERMAL EST init dev[0] temp hist to 25000
[    3.628895] THERMAL EST init dev[1] temp hist to 25000
[    3.628897] THERMAL EST cdev_type: pwm-fan.
[    3.628900] THERMAL EST governor name: pid_thermal_gov
[    3.629079] thermal thermal_zone7: Registering thermal zone thermal_zone7 for type thermal-fan-est.46
[    3.629081] THERMAL EST: thz register success.
[    3.629166] THERMAL EST: end of probe, return err: 0
[    3.629224] tegra_profiler: Branch: Dev
[    3.629226] tegra_profiler: Version: 1.107
[    3.629228] tegra_profiler: Samples version: 36
[    3.629230] tegra_profiler: IO version: 20
[    3.629234] armv8_pmu: imp: 0x41, idcode: 0x1
[    3.629238] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
[    3.629241] armv8_pmu: imp: 0x41, idcode: 0x1
[    3.629243] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
[    3.629246] armv8_pmu: imp: 0x41, idcode: 0x1
[    3.629248] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
[    3.629250] armv8_pmu: imp: 0x41, idcode: 0x1
[    3.629252] armv8_pmu: arch: AA64 PmuV3 ARM CORTEX-A57, type: 5, ver: 0
[    3.629357] tegra_profiler: auth: init
[    3.629619] GPS: mt3332_gps_mod_init: platform_driver_register ret = 0
[    3.636013] ahci 0000:03:00.0: version 3.0
[    3.654786] ahci 0000:03:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    3.654795] ahci 0000:03:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    4.235891] tegradc tegradc.1: hdmi: plugged
[    4.243498] scsi0 : ahci
[    4.247915] scsi1 : ahci
[    4.252245] scsi2 : ahci
[    4.256578] scsi3 : ahci
[    4.260860] ata1: SATA max UDMA/133 abar m2048@0x13000000 port 0x13000100 irq 551
[    4.270101] ata2: SATA max UDMA/133 abar m2048@0x13000000 port 0x13000180 irq 551
[    4.279349] ata3: SATA max UDMA/133 abar m2048@0x13000000 port 0x13000200 irq 551
[    4.288602] ata4: SATA max UDMA/133 abar m2048@0x13000000 port 0x13000280 irq 551
[    4.314783] ahci 0000:04:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    4.324746] ahci 0000:04:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    4.336423] scsi4 : ahci
[    4.341041] scsi5 : ahci
[    4.345638] scsi6 : ahci
[    4.350205] scsi7 : ahci
[    4.354722] ata5: SATA max UDMA/133 abar m2048@0x13200000 port 0x13200100 irq 552
[    4.364211] ata6: SATA max UDMA/133 abar m2048@0x13200000 port 0x13200180 irq 552
[    4.373695] ata7: SATA max UDMA/133 abar m2048@0x13200000 port 0x13200200 irq 552
[    4.383169] ata8: SATA max UDMA/133 abar m2048@0x13200000 port 0x13200280 irq 552
[    4.404786] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    4.414954] ahci 0000:05:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    4.427033] scsi8 : ahci
[    4.431870] scsi9 : ahci
[    4.436704] scsi10 : ahci
[    4.441596] scsi11 : ahci
[    4.446458] ata9: SATA max UDMA/133 abar m2048@0x13400000 port 0x13400100 irq 553
[    4.456191] ata10: SATA max UDMA/133 abar m2048@0x13400000 port 0x13400180 irq 553
[    4.466063] ata11: SATA max UDMA/133 abar m2048@0x13400000 port 0x13400200 irq 553
[    4.475939] ata12: SATA max UDMA/133 abar m2048@0x13400000 port 0x13400280 irq 553
[    4.504786] ahci 0000:06:00.0: AHCI 0001.0000 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    4.515267] ahci 0000:06:00.0: flags: 64bit ncq sntf led only pmp fbs pio slum part sxs
[    4.527471] scsi12 : ahci
[    4.532701] scsi13 : ahci
[    4.537922] scsi14 : ahci
[    4.543100] scsi15 : ahci
[    4.548271] ata13: SATA max UDMA/133 abar m2048@0x13600000 port 0x13600100 irq 554
[    4.558396] ata14: SATA max UDMA/133 abar m2048@0x13600000 port 0x13600180 irq 554
[    4.568518] ata15: SATA max UDMA/133 abar m2048@0x13600000 port 0x13600200 irq 554
[    4.578651] ata16: SATA max UDMA/133 abar m2048@0x13600000 port 0x13600280 irq 554
[    4.589067] tegra-sata tegra-sata.0: version 1.0
[    4.589561] t210_sata_uphy_pll_init: sata uphy already enabled
[    4.598653] tegra-sata tegra-sata.0: AHCI 0001.0301 32 slots 2 ports 3 Gbps 0x1 impl TEGRA-SATA mode
[    4.610523] tegra-sata tegra-sata.0: flags: 64bit ncq sntf pm led pmp pio slum part sadm apst
[    4.622676] Rounding down aligned max_sectors from 4294967295 to 4294967288
[    4.632738] spi-tegra114 7000d400.spi: /spi@7000d400/prod-settings has no reg property
[    4.643685] spi-tegra114 7000d400.spi: Static pin configuration used
[    4.653228] spi_master spi0: cannot find modalias for /spi@7000d400/prod-settings
[    4.654780] ata1: SATA link down (SStatus 0 SControl 300)
[    4.654817] ata4: SATA link down (SStatus 0 SControl 300)
[    4.654854] ata3: SATA link down (SStatus 0 SControl 300)
[    4.654885] ata2: SATA link down (SStatus 0 SControl 300)
[    4.696836] spi-tegra114 7000da00.spi: /spi@7000da00/prod-settings has no reg property
[    4.707693] spi-tegra114 7000da00.spi: Static pin configuration used
[    4.717136] spi_master spi3: cannot find modalias for /spi@7000da00/prod-settings
[    4.728150] tun: Universal TUN/TAP device driver, 1.6
[    4.736176] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
[    4.744781] ata7: SATA link down (SStatus 0 SControl 300)
[    4.744814] ata8: SATA link down (SStatus 0 SControl 300)
[    4.744844] ata6: SATA link down (SStatus 0 SControl 300)
[    4.744878] ata5: SATA link down (SStatus 0 SControl 300)
[    4.778831] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    4.787557] e1000e: Copyright(c) 1999 - 2013 Intel Corporation.
[    4.796811] PPP generic driver version 2.4.2
[    4.804034] PPP BSD Compression module registered
[    4.811596] PPP Deflate Compression module registered
[    4.819496] PPP MPPE Compression module registered
[    4.824764] ata9: SATA link down (SStatus 0 SControl 300)
[    4.824796] ata12: SATA link down (SStatus 0 SControl 300)
[    4.824827] ata10: SATA link down (SStatus 0 SControl 300)
[    4.824875] ata11: SATA link down (SStatus 0 SControl 300)
[    4.859910] NET: Registered protocol family 24
[    4.867160] usbcore: registered new interface driver r8152
[    4.875497] usbcore: registered new interface driver asix
[    4.883668] usbcore: registered new interface driver ax88179_178a
[    4.892557] usbcore: registered new interface driver cdc_ether
[    4.901208] usbcore: registered new interface driver smsc95xx
[    4.909753] usbcore: registered new interface driver net1080
[    4.918156] usbcore: registered new interface driver cdc_subset
[    4.926780] usbcore: registered new interface driver zaurus
[    4.934768] ata15: SATA link down (SStatus 0 SControl 300)
[    4.934804] ata13: SATA link down (SStatus 0 SControl 300)
[    4.934836] ata16: SATA link down (SStatus 0 SControl 300)
[    4.959417] usbcore: registered new interface driver cdc_ncm
[    4.967741] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    4.977271] ehci-pci: EHCI PCI platform driver
[    4.984636] tegra_xusb_read_usb_calib: usb_calib0 = 0x08a27c12
[    4.994636] tegra-xhci tegra-xhci: XUSB device id = 0xfac (T210)
[    5.004004] tegra-xhci tegra-xhci: Firmware File: tegra21x_xusb_firmware (124416 Bytes)
[    5.015010] tegra-xhci tegra-xhci: Firmware DMA Memory: dma 0x0000000080040000 mapped 0xffffff8000339000 (124416 Bytes)
[    5.015199] usbcore: registered new interface driver cdc_acm
[    5.015201] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[    5.015241] usbcore: registered new interface driver cdc_wdm
[    5.015279] usbcore: registered new interface driver usb-storage
[    5.015347] usbcore: registered new interface driver usbserial
[    5.015367] usbcore: registered new interface driver ftdi_sio
[    5.015392] usbserial: USB Serial support registered for FTDI USB Serial Device
[    5.015412] usbcore: registered new interface driver option
[    5.015430] usbserial: USB Serial support registered for GSM modem (1-port)
[    5.015453] usbcore: registered new interface driver pl2303
[    5.015468] usbserial: USB Serial support registered for pl2303
[    5.015491] usbcore: registered new interface driver nvshieldled
[    5.015493] Nvidia Tegra High-Speed USB Device Controller driver (Apr 30, 2012)
[    5.015747] tegra USB phy - inst[0] platform info:
[    5.015750] port_otg: yes
[    5.015751] has_hostpc: yes
[    5.015753] phy_interface: USB_PHY_INTF_UTMI
[    5.015754] op_mode: TEGRA_USB_OPMODE_DEVICE
[    5.015756] qc2_voltage: 0
[    5.015757] vbus_pmu_irq: 0
[    5.015759] charging: enabled
[    5.015760] remote_wakeup: disabled
[    5.020507] regulator_get() failed for (tegra-udc.0,usb_bat_chg), -19
[    5.020513] tegra-udc tegra-udc.0: usb_bat_chg regulator not registered: USB charging will not be enabled
[    5.020849] usbcore: registered new interface driver xpad
[    5.020871] usbcore: registered new interface driver usb_acecad
[    5.020897] usbcore: registered new interface driver aiptek
[    5.020922] usbcore: registered new interface driver gtco
[    5.020943] usbcore: registered new interface driver hanwang
[    5.020964] usbcore: registered new interface driver kbtab
[    5.020984] usbcore: registered new interface driver wacom
[    5.074760] otg state changed: SUSPEND --> PERIPHERAL
[    5.102955] max77620-rtc max77620-rtc.1: rtc core: registered max77620-rtc as rtc1
[    5.303897] tegra-xhci tegra-xhci: num_hsic_port 0
[    5.313561] tegra-xhci tegra-xhci: Firmware timestamp: 2016-06-16 13:21:43 UTC, Version: 50.16 release, Falcon state 0x20
[    5.327477] tegra-xhci tegra-xhci: Nvidia xHCI Host Controller
[    5.336238] tegra-xhci tegra-xhci: new USB bus registered, assigned bus number 1
[    5.347337] tegra-xhci tegra-xhci: irq 71, io mem 0x70090000
[    5.354927] Wake51 for irq=118
[    5.354929] Enabling wake51
[    5.355198] Wake16 for irq=34
[    5.355200] Enabling wake16
[    5.355913] tegra-rtc 7000e000.rtc: rtc core: registered tegra-rtc as rtc0
[    5.356132] i2c /dev entries driver
[    5.357689] [OV5693]: probing v4l2 sensor.
[    5.357965] ov5693 6-0036: Failed to allocate eeprom reg map: -22
[    5.411322] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    5.421158] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.431415] usb usb1: Product: Nvidia xHCI Host Controller
[    5.439927] usb usb1: Manufacturer: Linux 3.10.96+ tegra-xhci
[    5.448731] usb usb1: SerialNumber: tegra-xhci
[    5.456487] xHCI xhci_add_endpoint called for root hub
[    5.456494] xHCI xhci_check_bandwidth called for root hub
[    5.456582] hub 1-0:1.0: USB hub found
[    5.463419] hub 1-0:1.0: 5 ports detected
[    5.574748] tegra-xhci tegra-xhci: Nvidia xHCI Host Controller
[    5.583722] tegra-xhci tegra-xhci: new USB bus registered, assigned bus number 2
[    5.594405] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    5.604421] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.614882] usb usb2: Product: Nvidia xHCI Host Controller
[    5.623629] usb usb2: Manufacturer: Linux 3.10.96+ tegra-xhci
[    5.632688] usb usb2: SerialNumber: tegra-xhci
[    5.640623] xHCI xhci_add_endpoint called for root hub
[    5.640630] xHCI xhci_check_bandwidth called for root hub
[    5.640705] hub 2-0:1.0: USB hub found
[    5.647729] hub 2-0:1.0: 4 ports detected
[    5.724789] Wake44 for irq=81
[    5.730968] Wake40 for irq=53
[    5.737090] Wake41 for irq=53
[    5.743159] Wake42 for irq=53
[    5.749160] Wake43 for irq=53
[    6.157627] virtual_init
[    6.163586] [IMX135] sensor driver loading
[    6.170600] [imx132] sensor driver loading
[    6.177611] usb 1-3: new high-speed USB device number 3 using tegra-xhci
[    6.187323] [ar0261] sensor driver loading
[    6.194432] ov7695 sensor driver loading
[    6.201335] mt9m114 sensor driver loading
[    6.205153] usb 1-3: New USB device found, idVendor=1a40, idProduct=0101
[    6.205158] usb 1-3: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[    6.205161] usb 1-3: Product: USB 2.0 Hub
[    6.234897] [ov10823] sensor driver loading
[    6.235447] hub 1-3:1.0: USB hub found
[    6.235523] hub 1-3:1.0: 4 ports detected
[    6.255567] usbcore: registered new interface driver uvcvideo
[    6.264150] USB Video Class driver (1.1.1)
[    6.272646] max77620-power-off max77620-power-off.4: Event recorder REG_NVERC : 0x0
[    6.283771] FAN dev name: pwm-fan
[    6.290053] FAN:gpio request success.
[    6.296712] pwm_fan_driver pwm-fan.43: cap state:7, cap pwm:255
[    6.305763] pwm_fan_driver pwm-fan.43: got pwm for fan
[    6.313965] pwm_fan_driver pwm-fan.43: fan tach request irq: 360. success
[    6.323810] pwm_fan_driver pwm-fan.43: tach period: 1000
[    6.332180] pwm_fan_driver pwm-fan.43: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
[    6.343039] pwm_fan_driver pwm-fan.43: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2
[    6.354031] pwm_fan_driver pwm-fan.43: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2
[    6.365201] pwm_fan_driver pwm-fan.43: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2
[    6.376294] pwm_fan_driver pwm-fan.43: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3
[    6.387357] pwm_fan_driver pwm-fan.43: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3
[    6.398404] pwm_fan_driver pwm-fan.43: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3
[    6.409461] pwm_fan_driver pwm-fan.43: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4
[    6.420509] pwm_fan_driver pwm-fan.43: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4
[    6.431645] pwm_fan_driver pwm-fan.43: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4
[    6.443955] tegra_aotag tegra-aotag.30: AOTAG probe started
[    6.452453] tegra_aotag tegra-aotag.30: nominal ft -- 105
[    6.460652] tegra_aotag tegra-aotag.30: tall -- 76
[    6.468183] tegra_aotag tegra-aotag.30: tiddq -- 1
[    6.475667] tegra_aotag tegra-aotag.30: ten-count -- 16
[    6.483546] tegra_aotag tegra-aotag.30: tsample -- 9
[    6.491164] tegra_aotag tegra-aotag.30: pdiv -- 8
[    6.498517] tegra_aotag tegra-aotag.30: nominal cp -- 25
[    6.506477] tegra_aotag tegra-aotag.30: pdiv-ate -- 8
[    6.514149] tegra_aotag tegra-aotag.30: tsamp-ate -- 39
[    6.521971] tegra_aotag tegra-aotag.30: compensation A,B -- 10632,-67490
[    6.531266] tegra_aotag tegra-aotag.30: sensor found :ID 0, Name: aotag0
[    6.540551] tegra_aotag tegra-aotag.30: reading fuse value for sensor 0
[    6.549747] tegra_aotag tegra-aotag.30: base-cp:21a shifted-cp:2
[    6.558292] tegra_aotag tegra-aotag.30: base-ft:495 shifted-ft:fffffffd
[    6.567446] tegra_aotag tegra-aotag.30: actual_aotag_cp 260, ft 1035
[    6.576313] tegra_aotag tegra-aotag.30: - Tsens calib value - 0x3c3dd73
[    6.585424] tegra_aotag tegra-aotag.30: CPmask 1fff FTmask 3ffe000
[    6.594066] tegra_aotag tegra-aotag.30: Tsense calib CP - 0x1d73
[    6.602538] tegra_aotag tegra-aotag.30: Tsense Actual CP d.33779
[    6.611030] tegra_aotag tegra-aotag.30: Tsense calib FT - 0x1e1e
[    6.619473] tegra_aotag tegra-aotag.30: Tsense Actual FT d.37054
[    6.627900] tegra_aotag tegra-aotag.30: delta ts 3275, temp 775
[    6.636189] tegra_aotag tegra-aotag.30: thermA-893, thermB--828
[    6.644448] tegra_aotag tegra-aotag.30: Registering sensor 0
[    6.652473] tegra_aotag tegra-aotag.30: Bound to TZ : ID 0
[    6.660262] tegra_aotag tegra-aotag.30: shutdown temperature - 110
[    6.668759] tegra_aotag tegra-aotag.30: AOTAG EN 60
[    6.675915] tegra_aotag tegra-aotag.30: Probe done [SUCCESS]:0
[    6.684287] md: raid0 personality registered for level 0
[    6.691931] usb 2-1: new SuperSpeed USB device number 2 using tegra-xhci
[    6.701033] device-mapper: uevent: version 1.0.3
[    6.708216] device-mapper: ioctl: 4.24.0-ioctl (2013-01-15) initialised: dm-devel@redhat.com
[    6.719614] Tegra210 cpuidle driver
[    6.726354] usb 2-1: New USB device found, idVendor=0955, idProduct=09ff
[    6.726690] sdhci: Secure Digital Host Controller Interface driver
[    6.726692] sdhci: Copyright(c) Pierre Ossman
[    6.726694] sdhci-pltfm: SDHCI platform and OF driver helper
[    6.726970] mmc0: sdhci_tegra_probe line=5739 runtime pm type=mmc rtpm coupled with clock gate, disable-clock-gate=0
[    6.726986] sdhci-tegra sdhci-tegra.3: Parent select= pll_p rate=408000000
[    6.727001] sdhci-tegra sdhci-tegra.3: Parent select= pll_c4_out2 rate=199680000
[    6.727003] Could not add sdhci-tegra.3 to power domain using device tree
[    6.727625] sdhci-tegra sdhci-tegra.3: Speedo value 1923
[    6.727631] sdhci-tegra sdhci-tegra.3: Tuning constraints: nom_mv 1125, boot_mv 1125, min_or_mv 0
[    6.727709] regulator_get() failed for (sdhci-tegra.3,vqmmc), -19
[    6.727712] mmc0: no vqmmc regulator found
[    6.727719] regulator_get() failed for (sdhci-tegra.3,vmmc), -19
[    6.727721] mmc0: no vmmc regulator found
[    6.764761] mmc0: SDHCI controller on sdhci-tegra.3 [sdhci-tegra.3] using ADMA
[    6.764962] mmc1: sdhci_tegra_probe line=5739 runtime pm type=mmc rtpm coupled with clock gate, disable-clock-gate=0
[    6.764976] sdhci-tegra sdhci-tegra.1: Parent select= pll_p rate=408000000
[    6.764978] Could not add sdhci-tegra.1 to power domain using device tree
[    6.765538] sdhci-tegra sdhci-tegra.1: Speedo value 1923
[    6.765543] sdhci-tegra sdhci-tegra.1: Tuning constraints: nom_mv 1125, boot_mv 1125, min_or_mv 0
[    6.916443] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    6.926668] usb 2-1: Product: USB 10/100/1000 LAN
[    6.934423] usb 2-1: Manufacturer: Nvidia
[    6.941470] usb 2-1: SerialNumber: 000001000000
[    6.949062] regulator_get() failed for (sdhci-tegra.1,vqmmc), -19
[    6.958234] mmc1: no vqmmc regulator found
[    6.965404] regulator_get() failed for (sdhci-tegra.1,vmmc), -19
[    6.974521] mmc1: no vmmc regulator found
[    7.008482] mmc0: BKOPS_EN bit is not set
[    7.015715] mmc1: SDHCI controller on sdhci-tegra.1 [sdhci-tegra.1] using ADMA
[    7.026974] mmc2: sdhci_tegra_probe line=5739 runtime pm type=mmc rtpm coupled with clock gate, disable-clock-gate=0
[    7.040903] sdhci-tegra sdhci-tegra.0: Parent select= pll_p rate=408000000
[    7.051267] Could not add sdhci-tegra.0 to power domain using device tree
[    7.062131] sdhci-tegra sdhci-tegra.0: Speedo value 1923
[    7.070952] sdhci-tegra sdhci-tegra.0: Tuning constraints: nom_mv 1125, boot_mv 1125, min_or_mv 0
[    7.083605] regulator_get() failed for (sdhci-tegra.0,vqmmc), -19
[    7.093315] usb 2-1: reset SuperSpeed USB device number 2 using tegra-xhci
[    7.103833] mmc2: no vqmmc regulator found
[    7.111538] regulator_get() failed for (sdhci-tegra.0,vmmc), -19
[    7.121209] mmc2: no vmmc regulator found
[    7.164756] mmc2: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA
[    7.175851] gpio wake35 for gpio=201
[    7.185385] tegra-se tegra21-se: tegra_se_probe: complete
[    7.195224] hidraw: raw HID events driver (C) Jiri Kosina
[    7.205863] usbcore: registered new interface driver usbhid
[    7.207155] r8152 2-1:1.0 eth0: v2.03.3 (2015/01/29)
[    7.207160] r8152 2-1:1.0 eth0: This product is covered by one or more of the following patents:
                    US6,570,884, US6,115,776, and US6,327,625.

[    7.237387] mmc0: tap value and tuning window after hw tuning completion ...
[    7.237392] mmc0: tuning_window[0]: 0x7fffffff
[    7.237395] mmc0: tuning_window[1]: 0xfffffffe
[    7.237398] mmc0: tuning_window[2]: 0xffffffe7
[    7.237401] mmc0: tuning_window[3]: 0x7ffffe3f
[    7.237404] mmc0: tuning_window[4]: 0x0
[    7.237407] mmc0: tuning_window[5]: 0x0
[    7.237410] mmc0: tuning_window[6]: 0x0
[    7.237412] mmc0: tuning_window[7]: 0x0
[    7.237415] sdhci: Tap value: 49 | Trim value: 8
[    7.237418] sdhci: SDMMC Interrupt status: 0x00040000
[    7.237964] mmc0: switch to HS400 mode is successful
[    7.241809] mmc0: new HS400 MMC card at address 0001
[    7.242195] mmcblk0: mmc0:0001 016G32 14.6 GiB
[    7.242332] mmcblk0rpmb: mmc0:0001 016G32 partition 3 4.00 MiB
[    7.379506] usbhid: USB HID core driver
[    7.380846]  mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18
[    7.398732] tegra_bootloader_debug: Created tegra_bootloader directory
[    7.409111] tegra_bootloader_debug: Created sysfs interface tegra_bootloader_verify_regs in tegra_bootloader directory
[    7.423705] tegra_bootloader_debug: Created sysfs interface tegra_bootloader_prof in tegra_bootloader directory
[    7.435893] mmc1: queuing unknown CIS tuple 0x80 (5 bytes)
[    7.447403] nvadsp 702ef000.adsp: in probe()...
[    7.456408] nvadsp 702ef000.adsp: AMC/ARAM initialized.
[    7.465482] nvadsp 702ef000.adsp: nvadsp_app_module_probe
[    7.476586] tegra_throttle : init passed
[    7.485248] cpu-tegra: init EDP limit: 1122 MHz
[    7.493967] pll_x: not ready for dynamic ramp to 921600000
[    7.503218] pll_x: not ready for dynamic ramp to 921600000
[    7.528135] soctherm: prog thresholds
[    7.535811] soctherm: prog thresholds
[    7.543398] soctherm: tz:2 not found, skip thresh prog
[    7.552467] soctherm: prog thresholds
[    7.560022] soctherm: skipping sensor 4 programming
[    7.568729] soctherm: skipping sensor 5 programming
[    7.577342] soctherm: trip_point temp 127500 forced to 127000
[    7.594665] usbcore: registered new interface driver snd-usb-audio
[    7.628881] mmc1: tap value and tuning window after hw tuning completion ...
[    7.639699] mmc1: tuning_window[0]: 0xe7ffffff
[    7.647830] mmc1: tuning_window[1]: 0xffffffff
[    7.655907] mmc1: tuning_window[2]: 0xfffffffc
[    7.663943] mmc1: tuning_window[3]: 0x7fffff8f
[    7.671976] mmc1: tuning_window[4]: 0x0
[    7.679347] mmc1: tuning_window[5]: 0x0
[    7.686666] mmc1: tuning_window[6]: 0x0
[    7.693919] mmc1: tuning_window[7]: 0x0
[    7.701136] sdhci: Tap value: 46 | Trim value: 8
[    7.709148] sdhci: SDMMC Interrupt status: 0x00040000
[    7.721380] mmc1: new ultra high speed SDR104 SDIO card at address 0001
[    7.958411] tegra-i2c 7000c000.i2c: no acknowledge from address 0x1b
[    7.968142] rt5659 0-001b: Device with ID register ffffffc0 is not rt5659
[    7.986588] tegra210-i2s tegra210-i2s.0: Missing prop fsync-width for I2S0
[    7.997569] tegra210-i2s tegra210-i2s.2: Missing prop fsync-width for I2S2
[    8.007894] tegra210-i2s tegra210-i2s.3: Missing prop fsync-width for I2S3
[    8.018247] tegra210-i2s tegra210-i2s.4: Missing prop fsync-width for I2S4
[    8.032685] OPE platform probe
[    8.039045] OPE platform probe successful
[    8.046134] OPE platform probe
[    8.052334] OPE platform probe successful
[    8.059470] tegra210_adsp_audio_platform_probe: platform probe started
[    8.070148] tegra210-adsp adsp_audio.3: Default param-type to BYTE for mp3-dec1
[    8.080717] tegra210-adsp adsp_audio.3: Default param-type to BYTE for spkprot
[    8.091235] tegra210-adsp adsp_audio.3: Default param-type to BYTE for src
[    8.101281] tegra210-adsp adsp_audio.3: Default param-type to BYTE for aac-dec1
[    8.111820] tegra210-adsp adsp_audio.3: Default param-type to BYTE for aec
[    8.121566] tegra210_adsp_audio_platform_probe probe successfull.
[    8.128858] tegra-snd-t210ref-mobile-rt565x sound.27: Failed to get HP Det GPIO,should be handled by codec
[    8.196755] tegra210-ape-admaif tegra210-admaif: ASoC: Failed to create codec debugfs directory
[    8.209742] tegra210-adsp adsp_audio.3: ASoC: Failed to create platform debugfs directory
[    8.251604] tegra-snd-t210ref-mobile-rt565x sound.27:  ADMAIF1 <-> ADMAIF1 mapping ok
[    8.264156] tegra-snd-t210ref-mobile-rt565x sound.27:  ADMAIF2 <-> ADMAIF2 mapping ok
[    8.276663] tegra-snd-t210ref-mobile-rt565x sound.27:  ADMAIF3 <-> ADMAIF3 mapping ok
[    8.289127] tegra-snd-t210ref-mobile-rt565x sound.27:  ADMAIF4 <-> ADMAIF4 mapping ok
[    8.301610] tegra-snd-t210ref-mobile-rt565x sound.27:  ADMAIF5 <-> ADMAIF5 mapping ok
[    8.314072] tegra-snd-t210ref-mobile-rt565x sound.27:  ADMAIF6 <-> ADMAIF6 mapping ok
[    8.326560] tegra-snd-t210ref-mobile-rt565x sound.27:  ADMAIF7 <-> ADMAIF7 mapping ok
[    8.339036] tegra-snd-t210ref-mobile-rt565x sound.27:  ADMAIF8 <-> ADMAIF8 mapping ok
[    8.351498] tegra-snd-t210ref-mobile-rt565x sound.27:  ADMAIF9 <-> ADMAIF9 mapping ok
[    8.363922] tegra-snd-t210ref-mobile-rt565x sound.27:  ADMAIF10 <-> ADMAIF10 mapping ok
[    8.492415] tegra-snd-t210ref-mobile-rt565x sound.27:  ADSP-FE1 <-> ADSP PCM1 mapping ok
[    8.505141] tegra-snd-t210ref-mobile-rt565x sound.27:  ADSP-FE2 <-> ADSP PCM2 mapping ok
[    8.517743] compress asoc: ADSP-FE3 <-> ADSP COMPR1 mapping ok
[    8.528067] compress asoc: ADSP-FE4 <-> ADSP COMPR2 mapping ok
[    8.560525] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no source widget found for x HPO L Playback
[    8.572829] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x HPO L Playback -> direct -> x Headphone Jack
[    8.587146] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no source widget found for x HPO R Playback
[    8.599410] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x HPO R Playback -> direct -> x Headphone Jack
[    8.613740] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x MICBIAS1
[    8.625291] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Mic Jack -> direct -> x MICBIAS1
[    8.638536] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x IN1P
[    8.649776] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Mic Jack -> direct -> x IN1P
[    8.662729] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x Mic Det Power
[    8.674788] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Mic Jack -> direct -> x Mic Det Power
[    8.688565] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no source widget found for x SPO Playback
[    8.700748] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x SPO Playback -> direct -> x Int Spk
[    8.714415] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x DMIC L1
[    8.726053] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Int Mic -> direct -> x DMIC L1
[    8.739345] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x DMIC L2
[    8.751057] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Int Mic -> direct -> x DMIC L2
[    8.764388] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x DMIC R1
[    8.776144] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Int Mic -> direct -> x DMIC R1
[    8.789554] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: no sink widget found for x DMIC R2
[    8.801377] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: Failed to add route x Int Mic -> direct -> x DMIC R2
[    8.823167] input: tegra-snd-t210ref-mobile-rt565x Headphone Jack as /devices/platform/sound.27/sound/card1/input0
[    8.840876] tegra-snd-t210ref-mobile-rt565x sound.27: codec-dai "dit-hifi" registered
[    8.852031] tegra-snd-t210ref-mobile-rt565x sound.27: This is a dummy codec
[    8.863176] GACT probability NOT on
[    8.870009] Mirror/redirect action on
[    8.877028] u32 classifier
[    8.883080]     Actions configured
[    8.889867] Netfilter messages via NETLINK v0.30.
[    8.898047] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    8.907891] ctnetlink v0.93: registering with nfnetlink.
[    8.916820] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[    8.927347] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[    8.936993] xt_time: kernel timezone is -0000
[    8.944978] ipip: IPv4 over IPv4 tunneling driver
[    8.953549] ip_tables: (C) 2000-2006 Netfilter Core Team
[    8.962476] arp_tables: (C) 2002 David S. Miller
[    8.970646] TCP: cubic registered
[    8.977481] Initializing XFRM netlink socket
[    8.985425] NET: Registered protocol family 10
[    8.994090] mip6: Mobile IPv6
[    9.000647] ip6_tables: (C) 2000-2006 Netfilter Core Team
[    9.009778] sit: IPv6 over IPv4 tunneling driver
[    9.018664] NET: Registered protocol family 17
[    9.026768] NET: Registered protocol family 15
[    9.034838] Bridge firewalling registered
[    9.042421] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[    9.052008] Bluetooth: HIDP socket layer initialized
[    9.060686] NET: Registered protocol family 35
[    9.068905] Key type dns_resolver registered
[    9.076847] NET: Registered protocol family 41
[    9.086768] Registering SWP/SWPB emulation handler
[    9.117872] isp isp.0: initialized
[    9.126039] isp isp.1: initialized
[    9.133198] vdd_gpu: disabling
[    9.139741] en-vdd-cam-1v2-alt: disabling
[    9.147265] en-vdd-vcm-2v8: disabling
[    9.154439] en-vdd-cam-1v2: disabling
[    9.161625] en-vdd-cam-hv-2v8: disabling
[    9.169089] en-vdd-disp-1v8: disabling
[    9.176550] en-mdm-pwr-3v7: disabling
[    9.183786] en-vdd-disp-3v3: disabling
[    9.191272] en-vdd-ts-hv-3v3: disabling
[    9.198708] en-vdd-ts-1v8: disabling
[    9.205867] usb-vbus3: disabling
[    9.212684] usb-vbus1: disabling
[    9.219449] vdd-fan: disabling
[    9.232243] vdd-disp-3v0: disabling
[    9.239228] snsr_pm: disabling
[    9.245707] aux-3v3: disabling
[    9.252113] en-vdd-cam: disabling
[    9.258763] en-vdd-sd: disabling
[    9.270138] lcd-bl-en: disabling
[    9.276602] max77620-gpio7: disabling
[    9.295002] vdd-cpu-fixed: disabling
[    9.301724] regulator-dummy: disabling
[    9.309449] gpio wake24 for gpio=189
[    9.316254] gpio wake27 for gpio=192
[    9.322925] gpio wake25 for gpio=190
[    9.329655] input: gpio-keys as /devices/platform/gpio-keys.47/input/input1
[    9.356918] tegra-rtc 7000e000.rtc: setting system clock to 2016-09-28 04:13:29 UTC (1475036009)
[    9.368948] vi vi: vi_probe: ++
[    9.377069] vi vi: initialized
[    9.383519] vi vi: parsing node /host1x/vi
[    9.390641] vi vi: handling endpoint /host1x/vi/ports/port@0/endpoint
[    9.400175] vi vi: handling endpoint /host1x/vi/ports/port@1/endpoint
[    9.409631] vi vi: handling endpoint /host1x/vi/ports/port@2/endpoint
[    9.419050] vi vi: handling endpoint /host1x/vi/ports/port@3/endpoint
[    9.428346] vi vi: handling endpoint /host1x/vi/ports/port@4/endpoint
[    9.437552] vi vi: handling endpoint /host1x/vi/ports/port@5/endpoint
[    9.446707] vi vi: parsing node /host1x/i2c@546c0000/ov5693_c@36
[    9.455402] vi vi: handling endpoint /host1x/i2c@546c0000/ov5693_c@36/ports/port@0/endpoint
[    9.466519] vi vi: subdev ov5693 6-0036 bound
[    9.473636] vi vi: notify complete, all subdevs registered
[    9.481916] vi vi: creating links for entity ov5693 6-0036
[    9.490190] vi vi: processing endpoint /host1x/i2c@546c0000/ov5693_c@36/ports/port@0/endpoint
[    9.501597] vi vi: skipping channel port /host1x/i2c@546c0000/ov5693_c@36:0
[    9.511405] vi vi: creating links for channels
[    9.518673] vi vi: processing endpoint /host1x/vi/ports/port@0/endpoint
[    9.528142] vi vi: creating link for channel vi-output-2
[    9.536298] vi vi: creating ov5693 6-0036:0 -> vi-output-2:0 link
[    9.545928] [dram-timers] DRAM derating cdev registered.
[    9.554075] Disable partitions left on by BL
[    9.561189]     sata
[    9.566290]     disb
[    9.571250] Disabling clocks left on by bootloader:
[    9.578909]    audio2_dmic
[    9.584407]    audio1_dmic
[    9.589841]    audio0_dmic
[    9.595251]    audio_2x
[    9.600335]    audio
[    9.605167]    audio4
[    9.610041]    audio3
[    9.614888]    audio2
[    9.619680]    audio1
[    9.624425]    audio0
[    9.629208]    entropy
[    9.633988]    dsi2-fixed
[    9.639021]    dsi1-fixed
[    9.644001]    sdmmc4_ddr
[    9.648994]    sdmmc1_ddr
[    9.653972]    cclk_lp
[    9.659288] tegra_cl_dvfs 70110000.dfll-ovr: DT data retrieved successfully
[    9.668810] tune_cpu_trimmers: init soctherm cpu zone LOW
[    9.676773] tegra_cl_dvfs_init_cdev: cpu_cold cooling device registered
[    9.686161] Tegra CPU DFLL is initialized with use_dfll = 1
[    9.694369] tegra_dvfs: 0.vdd-cpu-rail-ovr connected to regulator
[    9.703238] tegra_cl_dvfs_init_cdev: cpu_hot cooling device registered
[    9.712429] tegra_dvfs: 4.vdd-core-rail-max77620 connected to regulator
[    9.722041] tegra_dvfs: 1.vdd-gpu-rail-ovr connected to regulator
[    9.731280] CPU rate: 921 MHz
[    9.736499] last reset is due to power on reset

[    9.746439] KERNEL: PMC reset status reg: 0x0
[    9.753360] tegra_actmon.emc: Completed initialization (0)
[    9.761281] tegra_actmon.avp: Completed initialization (0)
[    9.952398] tegra dvfs: tegra sysfs cap interface is initialized
[    9.960520] smmu_dump_pagetable(): fault_address=0x00000000e72a0000 pa=0xffffffffffffffff bytes=ffffffffffffffff #pte=0 in L2
[    9.960571] tegra dvfs: tegra sysfs gpu & emc interface is initialized
[    9.961493] Set maximum possible CPU frequency 1734000
[    9.961530] ALSA device list:
[    9.961533]   #0: HDA NVIDIA Tegra at 0x70038000 irq 113
[    9.961535]   #1: tegra-snd-t210ref-mobile-rt565x
[   10.008964] mc-err: (0) csr_afir: EMEM decode error on PDE or PTE entry
[   10.015158] mc-err:   status = 0x6000000e; addr = 0xe72a0000
[   10.023012] mc-err:   secure: no, access-type: read, SMMU fault: nr-nw-s
[   14.594760] ata14: softreset failed (1st FIS failed)
[   14.594774] smmu_dump_pagetable(): fault_address=0x0000000000000000 pa=0xffffffffffffffff bytes=ffffffffffffffff #pte=0 in L2
[   14.594778] mc-err: (0) csr_afir: EMEM decode error on PDE or PTE entry
[   14.594781] mc-err:   status = 0x6000000e; addr = 0x00000000
[   14.594784] mc-err:   secure: no, access-type: read, SMMU fault: nr-nw-s
[   20.024774] smmu_dump_pagetable(): fault_address=0x00000000e72a0000 pa=0xffffffffffffffff bytes=ffffffffffffffff #pte=0 in L2
[   20.038509] mc-err: (0) csr_afir: EMEM decode error on PDE or PTE entry
[   20.047577] mc-err:   status = 0x6000000e; addr = 0xe72a0000
[   20.055716] mc-err:   secure: no, access-type: read, SMMU fault: nr-nw-s
[   24.644754] ata14: softreset failed (1st FIS failed)
[   24.644765] smmu_dump_pagetable(): fault_address=0x0000000000000000 pa=0xffffffffffffffff bytes=ffffffffffffffff #pte=0 in L2
[   24.644769] mc-err: (0) csr_afir: EMEM decode error on PDE or PTE entry
[   24.644772] mc-err:   status = 0x6000000e; addr = 0x00000000
[   24.644775] mc-err:   secure: no, access-type: read, SMMU fault: nr-nw-s
[   30.074768] mc-err: Too many MC errors; throttling prints
[   59.694762] ata14: softreset failed (1st FIS failed)
[   59.694775] smmu_dump_pagetable(): fault_address=0x0000000000000000 pa=0xffffffffffffffff bytes=ffffffffffffffff #pte=0 in L2
[   59.694779] mc-err: (0) csr_afir: EMEM decode error on PDE or PTE entry
[   59.694782] mc-err:   status = 0x6000000e; addr = 0x00000000
[   59.694784] mc-err:   secure: no, access-type: read, SMMU fault: nr-nw-s
[   59.743260] ata14: limiting SATA link speed to 1.5 Gbps
[   64.774777] smmu_dump_pagetable(): fault_address=0x00000000e72a0000 pa=0xffffffffffffffff bytes=ffffffffffffffff #pte=0 in L2
[   64.788893] mc-err: (0) csr_afir: EMEM decode error on PDE or PTE entry
[   64.798289] mc-err:   status = 0x6000000e; addr = 0xe72a0000
[   64.806735] mc-err:   secure: no, access-type: read, SMMU fault: nr-nw-s
[   64.954818] ata14: softreset failed (device not ready)
[   64.962780] ata14: reset failed, giving up
[   64.969745] smmu_dump_pagetable(): fault_address=0x0000000000000000 pa=0xffffffffffffffff bytes=ffffffffffffffff #pte=0 in L2
[   64.984016] mc-err: (0) csr_afir: EMEM decode error on PDE or PTE entry
[   64.984152] Freeing unused kernel memory: 420K (ffffffc00112f000 - ffffffc001198000)
[   64.984159] Freeing alternatives memory: 52K (ffffffc001199000 - ffffffc0011a6000)
[   65.015074] mc-err:   status = 0x6000000e; addr = 0x00000000
[   65.023882] mc-err:   secure: no, access-type: read, SMMU fault: nr-nw-s
[   65.074761] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
[   65.164686] systemd[1]: systemd 229 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   65.186634] systemd[1]: Detected architecture arm64.
[   65.215673] systemd[1]: Set hostname to <tegra-ubuntu>.
[   65.364845] systemd[1]: Created slice User and Session Slice.
[   65.394933] systemd[1]: Listening on udev Kernel Socket.
[   65.424807] systemd[1]: Reached target Swap.
[   65.444907] systemd[1]: Listening on Journal Socket (/dev/log).
[   65.474803] systemd[1]: Reached target Remote File Systems (Pre).
[   65.504803] systemd[1]: Reached target Remote File Systems.
[   65.534969] systemd[1]: Created slice System Slice.
[   65.564819] systemd[1]: Reached target Slices.
[   65.584976] systemd[1]: Created slice system-getty.slice.
[   65.614875] systemd[1]: Listening on Journal Socket.
[   65.635787] systemd[1]: Starting Remount Root and Kernel File Systems...
[   65.666002] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[   65.695889] systemd[1]: Started Braille Device Support.
[   65.727433] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[   65.754934] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[   65.784821] systemd[1]: Reached target Encrypted Volumes.
[   65.815838] systemd[1]: Mounting Debug File System...
[   65.845935] systemd[1]: Mounting POSIX Message Queue File System...
[   65.874896] systemd[1]: Listening on Syslog Socket.
[   65.895885] systemd[1]: Starting Journal Service...
[   65.924998] systemd[1]: Listening on udev Control Socket.
[   65.954960] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[   65.984831] systemd[1]: Reached target User and Group Name Lookups.
[   66.018213] systemd[1]: Starting Load Kernel Modules...
[   66.044789] gpio wake52 for gpio=61
[   66.044954] systemd[1]: Listening on LVM2 poll daemon socket.
[   66.084913] systemd[1]: Listening on LVM2 metadata daemon socket.
[   66.115889] systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
[   66.145202] systemd[1]: Created slice system-serial\x2dgetty.slice.
[   66.177398] systemd[1]: Mounted POSIX Message Queue File System.
[   66.204852] systemd[1]: Mounted Debug File System.
[   66.224966] systemd[1]: Started Journal Service.
[   66.679353] systemd-journald[207]: Received request to flush runtime journal from PID 1
[   67.333117] cfg80211: Calling CRDA to update world regulatory domain
[   67.338108] sdhci-tegra sdhci-tegra.1: Card already in requested state
[   67.338111] sdhci-tegra sdhci-tegra.1: Card already in requested state
[   67.449326] dhd_module_init in
[   67.450276] Power-up adapter 'DHD generic adapter'
[   67.454130] wifi_platform_set_power = 1
[   67.655151] wifi_platform_bus_enumerate device present 1
[   67.671454] wifi_platform_bus_enumerate device present 0
[   67.671840] SDIO Vendor ID:02d0 and SDIO Device ID: 4354
[   67.671988] F1 signature read @0x18000000=0x17214354
[   67.678305] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2
[   67.678971] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
[   67.679048] wifi_platform_prealloc: failed to alloc static mem section 7
[   67.679059] wifi_platform_get_mac_addr
[   67.679433] of_get_mac_address: checking /chosen dtb node for mac address property nvidia,wifi-mac
[   67.679541] wifi_get_mac_addr: 00:04:4b:58:0e:60
[   67.680140]  wl_setup_wiphy : Registering Vendor80211
[   67.681401] wl_create_event_handler(): thread:wl_event_handler:166 started
[   67.681508]  wl_event_handler : tsk Enter, tsk = 0xffffffc0f33219f0
[   67.681797] dhd_attach(): thread:dhd_watchdog_thread:169 started
[   67.682004] dhd_attach(): thread:dhd_dpc:16a started
[   67.682068] dhd_attach(): thread:dhd_rxf:16b started
[   67.682079] dhd_deferred_work_init: work queue initialized
[   67.682808] Dongle Host Driver, version 1.201.82 (r)
               Compiled in drivers/net/wireless/bcmdhd on Sep 28 2016 at 15:40:34
[   67.683133] Register interface [wlan0]  MAC: 00:04:4b:58:0e:60

[   67.683142] dhd_prot_ioctl : bus is down. we have nothing to do
[   67.684393] wifi_platform_set_power = 0
[   67.884766] tegra_sysfs_register
[   67.937044] cfg80211: World regulatory domain updated:
[   67.937053] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   67.937059] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   67.937065] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
[   67.937069] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm)
[   67.937073] cfg80211:   (5170000 KHz - 5250000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[   67.937078] cfg80211:   (5250000 KHz - 5330000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[   67.937081] cfg80211:   (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm)
[   67.937086] cfg80211:   (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm)
[   67.937090] cfg80211:   (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[   69.182367] vgaarb: this pci device is not a vga device
[   69.192851] gk20a gpu.0: GPCPLL initial settings: NA mode, M=1, N=34, P=3
[   69.209788]
               Dongle Host Driver, version 1.201.82 (r)
               Compiled in drivers/net/wireless/bcmdhd on Sep 28 2016 at 15:40:34
[   69.209798] wl_android_wifi_on in
[   69.209802] wifi_platform_set_power = 1
[   69.244953] vgaarb: this pci device is not a vga device
[   69.335191] tegradc tegradc.1: blank - powerdown
[   69.364704] tegradc tegradc.1: unblank
[   69.409736] tegradc tegradc.1: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000
[   69.491318] mmc1: queuing unknown CIS tuple 0x80 (5 bytes)
[   69.554084] sdhci-tegra sdhci-tegra.1: Tuning already done, restoring the best tap value : 46
[   69.554412] SDIO Vendor ID:02d0 and SDIO Device ID: 4354
[   69.554564] F1 signature read @0x18000000=0x17214354
[   69.558951] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x1 pkg:0x2
[   69.559569] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
[   69.618366] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
[   69.660922] SDIO Vendor ID:02d0 and SDIO Device ID: 4354
[   69.660947] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[   69.661225] gpio wake8 for gpio=58
[   69.661227] Enabling wake8
[   69.662356] wifi_platform_get_mac_addr
[   69.662630] wifi_get_mac_addr: 00:04:4b:58:0e:60
[   69.664106] Firmware up: op_mode=0x0005, MAC=00:04:4b:58:0e:60
[   69.669899] dhd_preinit_ioctls pspretend_threshold for HostAPD failed  -23
[   69.674494] Firmware version = wl0: Mar  8 2016 12:52:17 version 7.35.221.11 (r623264) FWID 01-b55daaf2
[   69.676982] dhd_interworking_enable: failed to set WNM info, ret=-23
[   69.677175] tegra_sysfs_on
[   69.766909] tegradc tegradc.1: unblank
[   69.844971] IPv6: ADDRCONF(NETDEV_UP): enx00044b580e62: link is not ready
[   69.887376] IPv6: ADDRCONF(NETDEV_UP): enx00044b580e62: link is not ready
[   69.989608] CFGP2P-ERROR) wl_cfgp2p_add_p2p_disc_if : P2P interface registered
[   70.001185] WLC_E_IF: NO_IF set, event Ignored
[   72.855264] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   72.855287] Bluetooth: BNEP socket layer initialized
[   73.050705] tegradc tegradc.1: blank - powerdown
[   73.069501] IPv6: ADDRCONF(NETDEV_CHANGE): enx00044b580e62: link becomes ready
[   73.076516] tegradc tegradc.1: unblank
[   73.086788] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
[   73.120963] tegradc tegradc.1: nominal-pclk:148500000 parent:148500000 div:1.0 pclk:148500000 147015000~161865000
[   73.139384] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
[   73.155569] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
[   73.155990] tegra210_mixer tegra210-mixer: ASoC: hw_params() failed: -22
[   73.155995] tegra-snd-t210ref-mobile-rt565x sound.27: ASoC: PRE_PMU: TX1 Transmit-MIXER1-1 Receive event failed: -22
[   73.197275] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
[   73.199409] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
[   73.202380] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
[   73.215735] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
[   73.218625] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
[   73.234990] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
[   73.257976] Setting clk_rate = 44100 Hz pll_a_out0 = 45158400 Hz clk_out = 11289600 Hz
[   73.289303] HDA: No HDMI device connected
[   73.289737] HDA: No HDMI device connected
[   73.290165] HDA: No HDMI device connected
[   73.319061] HDA: No HDMI device connected
[   73.493871] tegradc tegradc.1: unblank
[  127.710423] nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
[  386.547146] vgaarb: this pci device is not a vga device
[  386.552667] tegradc tegradc.1: blank - powerdown