Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 5.6.0-rc5+ (alex@svn) (gcc version 7.4.1 20181213 [linaro-7.4-2019.02 revision 56ec6f6b99cc167ff0c2f8e1a2eed33b1edc85d4] (Linaro GCC 7.4-2019.02)) #1 SMP Mon Mar 9 19:14:37 -03 2020
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: div instructions available: patching division code
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] OF: fdt: Machine model: Banana Pi M2 Zero
- [ 0.000000] Memory policy: Data cache writealloc
- [ 0.000000] cma: Reserved 128 MiB at 0x55c00000
- [ 0.000000] On node 0 totalpages: 131072
- [ 0.000000] Normal zone: 1024 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 131072 pages, LIFO batch:31
- [ 0.000000] psci: probing for conduit method from DT.
- [ 0.000000] psci: Using PSCI v0.1 Function IDs from DT
- [ 0.000000] percpu: Embedded 15 pages/cpu s31180 r8192 d22068 u61440
- [ 0.000000] pcpu-alloc: s31180 r8192 d22068 u61440 alloc=15*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 130048
- [ 0.000000] Kernel command line: console=ttyS0,115200 earlyprintk rootfstype=ext4 root=/dev/mmcblk0p2 rw rootwait fsck.repair=yes panic=10 no_console_suspend consoleblank=0 drm_leak_fbdev_smem=1
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 374112K/524288K available (8192K kernel code, 449K rwdata, 2076K rodata, 1024K init, 265K bss, 19104K reserved, 131072K cma-reserved, 0K highmem)
- [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] rcu: Hierarchical RCU implementation.
- [ 0.000000] rcu: RCU event tracing is enabled.
- [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
- [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- [ 0.000000] GIC: Using split EOI/Deactivate mode
- [ 0.000000] random: get_random_bytes called from start_kernel+0x548/0x6d4 with crng_init=0
- [ 0.000000] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
- [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
- [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
- [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
- [ 0.000018] Switching to timer-based delay loop, resolution 41ns
- [ 0.000220] Console: colour dummy device 80x30
- [ 0.000264] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
- [ 0.000277] pid_max: default: 32768 minimum: 301
- [ 0.000424] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.000436] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.001172] CPU: Testing write buffer coherency: ok
- [ 0.001631] CPU0: update cpu_capacity 1024
- [ 0.001643] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.002182] Setting up static identity map for 0x40100000 - 0x40100060
- [ 0.002306] rcu: Hierarchical SRCU implementation.
- [ 0.002818] smp: Bringing up secondary CPUs ...
- [ 0.013575] CPU1: update cpu_capacity 1024
- [ 0.013581] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.024467] CPU2: update cpu_capacity 1024
- [ 0.024473] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.035228] CPU3: update cpu_capacity 1024
- [ 0.035235] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.035321] smp: Brought up 1 node, 4 CPUs
- [ 0.035345] SMP: Total of 4 processors activated (192.00 BogoMIPS).
- [ 0.035351] CPU: All CPU(s) started in HYP mode.
- [ 0.035355] CPU: Virtualization extensions available.
- [ 0.036039] devtmpfs: initialized
- [ 0.042303] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
- [ 0.042544] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.042568] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
- [ 0.047095] pinctrl core: initialized pinctrl subsystem
- [ 0.047724] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.048672] NET: Registered protocol family 16
- [ 0.050207] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.051156] cpuidle: using governor menu
- [ 0.051472] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.051480] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.075765] iommu: Default domain type: Translated
- [ 0.076191] SCSI subsystem initialized
- [ 0.076426] libata version 3.00 loaded.
- [ 0.076646] usbcore: registered new interface driver usbfs
- [ 0.076695] usbcore: registered new interface driver hub
- [ 0.076789] usbcore: registered new device driver usb
- [ 0.077002] mc: Linux media interface: v0.10
- [ 0.077038] videodev: Linux video capture interface: v2.00
- [ 0.077150] pps_core: LinuxPPS API ver. 1 registered
- [ 0.077157] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
- [ 0.077176] PTP clock support registered
- [ 0.077579] Advanced Linux Sound Architecture Driver Initialized.
- [ 0.078166] Bluetooth: Core ver 2.22
- [ 0.078238] NET: Registered protocol family 31
- [ 0.078244] Bluetooth: HCI device and connection manager initialized
- [ 0.078259] Bluetooth: HCI socket layer initialized
- [ 0.078270] Bluetooth: L2CAP socket layer initialized
- [ 0.078290] Bluetooth: SCO socket layer initialized
- [ 0.078999] clocksource: Switched to clocksource arch_sys_counter
- [ 0.086484] NET: Registered protocol family 2
- [ 0.087025] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
- [ 0.087051] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
- [ 0.087103] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
- [ 0.087165] TCP: Hash tables configured (established 4096 bind 4096)
- [ 0.087291] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 0.087338] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
- [ 0.087524] NET: Registered protocol family 1
- [ 0.088109] RPC: Registered named UNIX socket transport module.
- [ 0.088119] RPC: Registered udp transport module.
- [ 0.088124] RPC: Registered tcp transport module.
- [ 0.088129] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.088828] Trying to unpack rootfs image as initramfs...
- [ 0.131907] Freeing initrd memory: 960K
- [ 0.133100] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
- [ 0.134271] Initialise system trusted keyrings
- [ 0.134550] workingset: timestamp_bits=30 max_order=17 bucket_order=0
- [ 0.142156] NFS: Registering the id_resolver key type
- [ 0.142200] Key type id_resolver registered
- [ 0.142206] Key type id_legacy registered
- [ 0.178614] Key type asymmetric registered
- [ 0.178629] Asymmetric key parser 'x509' registered
- [ 0.178696] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
- [ 0.178706] io scheduler mq-deadline registered
- [ 0.178713] io scheduler kyber registered
- [ 0.179868] sun4i-usb-phy 1c19400.phy: Couldn't request ID GPIO
- [ 0.184209] sun8i-h3-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
- [ 0.185945] sun8i-h3-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
- [ 0.188468] sun6i-dma 1c02000.dma-controller: WARN: Device release is not defined so it is not safe to unbind this driver while in use
- [ 0.236735] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
- [ 0.239068] sun8i-h3-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pa not found, using dummy regulator
- [ 0.239926] printk: console [ttyS0] disabled
- [ 0.240040] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 42, base_baud = 1500000) is a 16550A
- [ 0.932577] printk: console [ttyS0] enabled
- [ 0.937333] sun8i-h3-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pg not found, using dummy regulator
- [ 0.947876] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 43, base_baud = 1500000) is a 16550A
- [ 0.956751] serial serial0: tty port ttyS1 registered
- [ 0.962466] 1c28c00.serial: ttyS3 at MMIO 0x1c28c00 (irq = 44, base_baud = 1500000) is a 16550A
- [ 0.985200] sun4i-drm display-engine: bound 1100000.mixer (ops 0xc095a2e0)
- [ 0.992409] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xc0956ec0)
- [ 1.000135] sun8i-dw-hdmi 1ee0000.hdmi: 1ee0000.hdmi supply hvcc not found, using dummy regulator
- [ 1.009993] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
- [ 1.019952] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
- [ 1.027700] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xc09598c8)
- [ 1.034506] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
- [ 1.041124] [drm] No driver support for vblank timestamp query.
- [ 1.047455] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
- [ 1.055333] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes
- [ 1.064237] libphy: Fixed MDIO Bus: probed
- [ 1.068682] CAN device driver interface
- [ 1.073031] dwmac-sun8i 1c30000.ethernet: IRQ eth_wake_irq not found
- [ 1.079400] dwmac-sun8i 1c30000.ethernet: IRQ eth_lpi not found
- [ 1.085413] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
- [ 1.091216] dwmac-sun8i 1c30000.ethernet: No regulator found
- [ 1.097168] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
- [ 1.104431] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
- [ 1.111657] dwmac-sun8i 1c30000.ethernet: COE Type 2
- [ 1.116616] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
- [ 1.123418] dwmac-sun8i 1c30000.ethernet: Normal descriptors
- [ 1.129084] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
- [ 1.135287] libphy: stmmac: probed
- [ 1.139307] dwmac-sun8i 1c30000.ethernet: Found internal PHY node
- [ 1.145799] libphy: mdio_mux: probed
- [ 1.149421] dwmac-sun8i 1c30000.ethernet: Switch mux to internal PHY
- [ 1.155770] dwmac-sun8i 1c30000.ethernet: Powering internal PHY
- [ 1.162992] libphy: mdio_mux: probed
- [ 1.167106] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 1.173655] ehci-platform: EHCI generic platform driver
- [ 1.179098] ehci-platform 1c1a000.usb: EHCI Host Controller
- [ 1.184690] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
- [ 1.192969] ehci-platform 1c1a000.usb: irq 27, io mem 0x01c1a000
- [ 1.239004] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
- [ 1.245290] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
- [ 1.253563] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.260786] usb usb1: Product: EHCI Host Controller
- [ 1.265658] usb usb1: Manufacturer: Linux 5.6.0-rc5+ ehci_hcd
- [ 1.271405] usb usb1: SerialNumber: 1c1a000.usb
- [ 1.276513] hub 1-0:1.0: USB hub found
- [ 1.280324] hub 1-0:1.0: 1 port detected
- [ 1.285165] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 1.291400] ohci-platform: OHCI generic platform driver
- [ 1.296801] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
- [ 1.303448] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
- [ 1.311426] ohci-platform 1c1a400.usb: irq 28, io mem 0x01c1a400
- [ 1.383183] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.06
- [ 1.391469] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.398681] usb usb2: Product: Generic Platform OHCI controller
- [ 1.404607] usb usb2: Manufacturer: Linux 5.6.0-rc5+ ohci_hcd
- [ 1.410358] usb usb2: SerialNumber: 1c1a400.usb
- [ 1.417698] hub 2-0:1.0: USB hub found
- [ 1.421490] hub 2-0:1.0: 1 port detected
- [ 1.427747] sun6i-rtc 1f00000.rtc: registered as rtc0
- [ 1.432823] sun6i-rtc 1f00000.rtc: RTC enabled
- [ 1.437539] i2c /dev entries driver
- [ 1.443422] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
- [ 1.451705] sun8i-h3-r-pinctrl 1f02c00.pinctrl: 1f02c00.pinctrl supply vcc-pl not found, using dummy regulator
- [ 1.462296] sun8i-h3-pinctrl 1c20800.pinctrl: 1c20800.pinctrl supply vcc-pf not found, using dummy regulator
- [ 1.498260] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB
- [ 1.506275] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
- [ 1.536858] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB
- [ 1.544952] ledtrig-cpu: registered to indicate activity on CPUs
- [ 1.549444] mmc0: host does not support reading read-only switch, assuming write-enable
- [ 1.551485] sun8i-ce 1c15000.crypto: Set mod clock to 50000000 (50 Mhz) from 24000000 (24 Mhz)
- [ 1.560830] mmc0: new high speed SDXC card at address 21e9
- [ 1.567840] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
- [ 1.573977] mmcblk0: mmc0:21e9 APPSD 250 GiB
- [ 1.585920] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
- [ 1.593882] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
- [ 1.594075] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 1.594937] mmcblk0: p1 p2
- [ 1.601963] sun8i-ce 1c15000.crypto: will run requests pump with realtime priority
- [ 1.608524] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 1.610004] sun8i-ce 1c15000.crypto: Register cbc(aes)
- [ 1.618856] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 1.623232] sun8i-ce 1c15000.crypto: Register ecb(aes)
- [ 1.630678] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 1.633725] sun8i-ce 1c15000.crypto: Register cbc(des3_ede)
- [ 1.649902] sun8i-ce 1c15000.crypto: Register ecb(des3_ede)
- [ 1.655713] sun8i-ce 1c15000.crypto: CryptoEngine Die ID 1
- [ 1.661511] hid: raw HID events driver (C) Jiri Kosina
- [ 1.667213] usbcore: registered new interface driver usbhid
- [ 1.672802] usbhid: USB HID core driver
- [ 1.680480] sun4i-codec 1c22c00.codec: Failed to register our card
- [ 1.686843] random: fast init done
- [ 1.688422] NET: Registered protocol family 17
- [ 1.694734] can: controller area network core (rev 20170425 abi 9)
- [ 1.701028] NET: Registered protocol family 29
- [ 1.705471] can: raw protocol (rev 20170425)
- [ 1.709756] can: broadcast manager protocol (rev 20170425 t)
- [ 1.715416] can: netlink gateway (rev 20190810) max_hops=1
- [ 1.721240] Bluetooth: RFCOMM TTY layer initialized
- [ 1.726126] Bluetooth: RFCOMM socket layer initialized
- [ 1.728452] mmc1: new high speed SDIO card at address 0001
- [ 1.731339] Bluetooth: RFCOMM ver 1.11
- [ 1.740526] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 1.745831] Bluetooth: BNEP filters: protocol multicast
- [ 1.751090] Bluetooth: BNEP socket layer initialized
- [ 1.756048] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 1.761984] Bluetooth: HIDP socket layer initialized
- [ 1.767163] Key type dns_resolver registered
- [ 1.771693] Registering SWP/SWPB emulation handler
- [ 1.776719] Loading compiled-in X.509 certificates
- [ 1.793939] ehci-platform 1c1b000.usb: EHCI Host Controller
- [ 1.799661] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 3
- [ 1.807911] ehci-platform 1c1b000.usb: irq 29, io mem 0x01c1b000
- [ 1.839005] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
- [ 1.845291] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
- [ 1.853572] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.860797] usb usb3: Product: EHCI Host Controller
- [ 1.865670] usb usb3: Manufacturer: Linux 5.6.0-rc5+ ehci_hcd
- [ 1.871420] usb usb3: SerialNumber: 1c1b000.usb
- [ 1.876538] hub 3-0:1.0: USB hub found
- [ 1.880352] hub 3-0:1.0: 1 port detected
- [ 1.885109] ehci-platform 1c1c000.usb: EHCI Host Controller
- [ 1.890736] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 4
- [ 1.898710] ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000
- [ 1.929014] ehci-platform 1c1c000.usb: USB 2.0 started, EHCI 1.00
- [ 1.935254] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
- [ 1.943527] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 1.950751] usb usb4: Product: EHCI Host Controller
- [ 1.955623] usb usb4: Manufacturer: Linux 5.6.0-rc5+ ehci_hcd
- [ 1.961370] usb usb4: SerialNumber: 1c1c000.usb
- [ 1.966383] hub 4-0:1.0: USB hub found
- [ 1.970173] hub 4-0:1.0: 1 port detected
- [ 1.974825] ehci-platform 1c1d000.usb: EHCI Host Controller
- [ 1.980433] ehci-platform 1c1d000.usb: new USB bus registered, assigned bus number 5
- [ 1.988418] ehci-platform 1c1d000.usb: irq 33, io mem 0x01c1d000
- [ 2.019015] ehci-platform 1c1d000.usb: USB 2.0 started, EHCI 1.00
- [ 2.025242] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
- [ 2.033516] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.040742] usb usb5: Product: EHCI Host Controller
- [ 2.045614] usb usb5: Manufacturer: Linux 5.6.0-rc5+ ehci_hcd
- [ 2.051363] usb usb5: SerialNumber: 1c1d000.usb
- [ 2.056384] hub 5-0:1.0: USB hub found
- [ 2.060175] hub 5-0:1.0: 1 port detected
- [ 2.064827] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
- [ 2.071478] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 6
- [ 2.079893] ohci-platform 1c1b400.usb: irq 30, io mem 0x01c1b400
- [ 2.153184] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.06
- [ 2.161464] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.168677] usb usb6: Product: Generic Platform OHCI controller
- [ 2.174604] usb usb6: Manufacturer: Linux 5.6.0-rc5+ ohci_hcd
- [ 2.180353] usb usb6: SerialNumber: 1c1b400.usb
- [ 2.185689] hub 6-0:1.0: USB hub found
- [ 2.189487] hub 6-0:1.0: 1 port detected
- [ 2.194156] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
- [ 2.200810] ohci-platform 1c1c400.usb: new USB bus registered, assigned bus number 7
- [ 2.208765] ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400
- [ 2.283165] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.06
- [ 2.291441] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.298653] usb usb7: Product: Generic Platform OHCI controller
- [ 2.304578] usb usb7: Manufacturer: Linux 5.6.0-rc5+ ohci_hcd
- [ 2.310327] usb usb7: SerialNumber: 1c1c400.usb
- [ 2.315349] hub 7-0:1.0: USB hub found
- [ 2.319144] hub 7-0:1.0: 1 port detected
- [ 2.323831] ohci-platform 1c1d400.usb: Generic Platform OHCI controller
- [ 2.330486] ohci-platform 1c1d400.usb: new USB bus registered, assigned bus number 8
- [ 2.338430] ohci-platform 1c1d400.usb: irq 34, io mem 0x01c1d400
- [ 2.413161] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 5.06
- [ 2.421435] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.428648] usb usb8: Product: Generic Platform OHCI controller
- [ 2.434573] usb usb8: Manufacturer: Linux 5.6.0-rc5+ ohci_hcd
- [ 2.440321] usb usb8: SerialNumber: 1c1d400.usb
- [ 2.445322] hub 8-0:1.0: USB hub found
- [ 2.449115] hub 8-0:1.0: 1 port detected
- [ 2.453838] usb_phy_generic usb_phy_generic.3.auto: usb_phy_generic.3.auto supply vcc not found, using dummy regulator
- [ 2.465154] musb-hdrc musb-hdrc.4.auto: MUSB HDRC host driver
- [ 2.470949] musb-hdrc musb-hdrc.4.auto: new USB bus registered, assigned bus number 9
- [ 2.478947] usb usb9: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.06
- [ 2.487221] usb usb9: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 2.494449] usb usb9: Product: MUSB HDRC host driver
- [ 2.499419] usb usb9: Manufacturer: Linux 5.6.0-rc5+ musb-hcd
- [ 2.505157] usb usb9: SerialNumber: musb-hdrc.4.auto
- [ 2.510638] hub 9-0:1.0: USB hub found
- [ 2.514417] hub 9-0:1.0: 1 port detected
- [ 2.522757] debugfs: Directory '1c22c00.codec' with parent 'H3 Audio Codec' already present!
- [ 2.532698] sun4i-codec 1c22c00.codec: Codec <-> 1c22c00.codec mapping ok
- [ 2.541453] sun6i-rtc 1f00000.rtc: setting system clock to 2020-03-28T15:19:09 UTC (1585408749)
- [ 2.550438] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- [ 2.569560] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- [ 2.576301] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
- [ 2.584935] cfg80211: failed to load regulatory.db
- [ 2.584954] ALSA device list:
- [ 2.592880] #0: H3 Audio Codec
- [ 2.599711] Freeing unused kernel memory: 1024K
- [ 2.629519] Run /init as init process
- [ 2.633266] with arguments:
- [ 2.633374] /init
- [ 2.633475] earlyprintk
- [ 2.633550] with environment:
- [ 2.633639] HOME=/
- [ 2.633727] TERM=linux
- [ 2.633825] drm_leak_fbdev_smem=1
- [ 2.825029] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 3.785344] systemd[1]: Failed to find module 'autofs4'
- [ 3.830204] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybrid)
- [ 3.857169] systemd[1]: Detected architecture arm.
- [ 3.897391] systemd[1]: Set hostname to <bpi-m2z>.
- [ 3.906647] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argument
- [ 4.763736] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
- [ 4.780951] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
- [ 5.169987] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= references a path below legacy directory /var/run/, updating /var/run/dbus/system_bus_socket \xe2\x86\x92 /run/dbus/system_bus_socket; please update the unit file accordingly.
- [ 5.360393] systemd[1]: /etc/systemd/system/dhclient.service:8: PIDFile= references a path below legacy directory /var/run/, updating /var/run/dhclient.pid \xe2\x86\x92 /run/dhclient.pid; please update the unit file accordingly.
- [ 5.616059] random: systemd: uninitialized urandom read (16 bytes read)
- [ 5.623547] systemd[1]: Listening on udev Kernel Socket.
- [ 5.637030] random: systemd: uninitialized urandom read (16 bytes read)
- [ 5.644110] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 5.689992] random: systemd: uninitialized urandom read (16 bytes read)
- [ 6.348088] EXT4-fs (mmcblk0p2): re-mounted. Opts: commit=600,errors=remount-ro
- [ 7.100380] systemd-journald[182]: Received request to flush runtime journal from PID 1
- [ 7.896329] sun8i-di 1400000.deinterlace: Device registered as /dev/video0
- [ 7.905386] sunxi_cedrus: module is from the staging directory, the quality is unknown, you have been warned.
- [ 7.909669] cedrus 1c0e000.video-codec: Device registered as /dev/video1
- [ 7.966908] Registered IR keymap rc-empty
- [ 7.967074] rc rc0: sunxi-ir as /devices/platform/soc/1f02000.ir/rc/rc0
- [ 7.967226] input: sunxi-ir as /devices/platform/soc/1f02000.ir/rc/rc0/input0
- [ 7.967836] sunxi-ir 1f02000.ir: initialized sunXi IR driver
- [ 7.990629] Bluetooth: HCI UART driver ver 2.3
- [ 7.990643] Bluetooth: HCI UART protocol H4 registered
- [ 7.990955] Bluetooth: HCI UART protocol Broadcom registered
- [ 8.047864] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
- [ 8.051692] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
- [ 8.072247] usbcore: registered new interface driver brcmfmac
- [ 8.104962] lima 1c40000.gpu: IRQ ppmmu2 not found
- [ 8.109918] lima 1c40000.gpu: IRQ ppmmu3 not found
- [ 8.150748] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
- [ 8.150895] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
- [ 8.150988] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
- [ 8.151034] lima 1c40000.gpu: IRQ pp2 not found
- [ 8.155600] lima 1c40000.gpu: IRQ pp3 not found
- [ 8.160237] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
- [ 8.195848] lima 1c40000.gpu: bus rate = 200000000
- [ 8.195871] lima 1c40000.gpu: mod rate = 384000000
- [ 8.196488] [drm] Initialized lima 1.0.0 20190217 for 1c40000.gpu on minor 1
- [ 8.353722] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
- [ 8.377173] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available
- [ 8.390178] Bluetooth: hci0: BCM: chip id 94
- [ 8.390696] Bluetooth: hci0: BCM: features 0x2e
- [ 8.392830] Bluetooth: hci0: BCM43430A1
- [ 8.392852] Bluetooth: hci0: BCM43430A1 (001.002.009) build 0000
- [ 8.427587] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Aug 29 2016 20:48:16 version 7.45.41.26 (r640327) FWID 01-4527cfab
- [ 8.479477] dwmac-sun8i 1c30000.ethernet eth0: PHY [0.1:01] driver [Generic PHY] (irq=POLL)
- [ 8.482296] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
- [ 8.482317] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
- [ 8.482329] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
- [ 8.482346] dwmac-sun8i 1c30000.ethernet eth0: configuring for phy/mii link mode
- [ 8.487072] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx
- [ 8.740935] asoc-simple-card soc:sound: i2s-hifi <-> 1c22800.i2s mapping ok
- [ 9.170011] Bluetooth: hci0: BCM43430A1 (001.002.009) build 0106
- [ 13.483391] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
- [ 13.483597] ext4 filesystem being mounted at /boot supports timestamps until 2038 (0x7fffffff)
- [ 16.059550] random: crng init done
- [ 16.059566] random: 7 urandom warning(s) missed due to ratelimiting
- [ 18.105068] zram: Added device: zram0
- [ 18.106121] zram: Added device: zram1
- [ 18.107217] zram: Added device: zram2
- [ 18.108192] zram: Added device: zram3
- [ 18.288189] zram0: detected capacity change from 0 to 64917504
- [ 18.562876] Adding 63392k swap on /dev/zram0. Priority:5 extents:1 across:63392k SS
- [ 18.568644] zram1: detected capacity change from 0 to 64917504
- [ 18.689136] Adding 63392k swap on /dev/zram1. Priority:5 extents:1 across:63392k SS
- [ 18.691589] zram2: detected capacity change from 0 to 64917504
- [ 18.779056] Adding 63392k swap on /dev/zram2. Priority:5 extents:1 across:63392k SS
- [ 18.781357] zram3: detected capacity change from 0 to 64917504
- [ 18.899156] Adding 63392k swap on /dev/zram3. Priority:5 extents:1 across:63392k SS
- [ 29.970048] ieee80211 phy0: brcmf_fw_crashed: Firmware has halted or crashed
- [ 32.479145] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
- [ 32.488941] brcmfmac: brcmf_sdio_checkdied: firmware trap in dongle
- [ 32.495680] brcmfmac: dongle trap info: type 0x3 @ epc 0x00000000
- cpsr 0x20000003 spsr 0x20000010 sp 0x0006fc0c
- lr 0x00009479 pc 0x00000000 offset 0x6fbb8
- r0 0x0005c6cc r1 0x000367bc r2 0x00000021 r3 0x00078ea0
- r4 0x0006ad6c r5 0x00000000 r6 0x000367bc r7 0x00078ea0
- [ 33.119341] vcc3v0: disabling
- [ 33.119397] vcc5v0: disabling
- [ 35.039434] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
- [ 35.058618] brcmfmac: brcmf_sdio_checkdied: firmware trap in dongle
- [ 35.075419] brcmfmac: dongle trap info: type 0x3 @ epc 0x00000000
- cpsr 0x20000003 spsr 0x20000010 sp 0x0006fc0c
- lr 0x00009479 pc 0x00000000 offset 0x6fbb8
- r0 0x0005c6cc r1 0x000367bc r2 0x00000021 r3 0x00078ea0
- r4 0x0006ad6c r5 0x00000000 r6 0x000367bc r7 0x00078ea0
- [ 35.075448] ieee80211 phy0: brcmf_pno_clean: failed code -110
- [ 42.639118] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
- [ 42.648938] brcmfmac: brcmf_sdio_checkdied: firmware trap in dongle
- [ 42.655671] brcmfmac: dongle trap info: type 0x3 @ epc 0x00000000
- cpsr 0x20000003 spsr 0x20000010 sp 0x0006fc0c
- lr 0x00009479 pc 0x00000000 offset 0x6fbb8
- r0 0x0005c6cc r1 0x000367bc r2 0x00000021 r3 0x00078ea0
- r4 0x0006ad6c r5 0x00000000 r6 0x000367bc r7 0x00078ea0
- [ 42.655726] ieee80211 phy0: brcmf_run_escan: error (-110)
- [ 42.661316] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
- [ 46.239351] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
- [ 46.250290] brcmfmac: brcmf_sdio_checkdied: firmware trap in dongle
- [ 46.257492] brcmfmac: dongle trap info: type 0x3 @ epc 0x00000000
- cpsr 0x20000003 spsr 0x20000010 sp 0x0006fc0c
- lr 0x00009479 pc 0x00000000 offset 0x6fbb8
- r0 0x0005c6cc r1 0x000367bc r2 0x00000021 r3 0x00078ea0
- r4 0x0006ad6c r5 0x00000000 r6 0x000367bc r7 0x00078ea0
- [ 46.257583] ieee80211 phy0: brcmf_run_escan: error (-110)
- [ 46.263453] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
- [ 49.839268] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
- [ 49.852910] brcmfmac: brcmf_sdio_checkdied: firmware trap in dongle
- [ 49.862733] brcmfmac: dongle trap info: type 0x3 @ epc 0x00000000
- cpsr 0x20000003 spsr 0x20000010 sp 0x0006fc0c
- lr 0x00009479 pc 0x00000000 offset 0x6fbb8
- r0 0x0005c6cc r1 0x000367bc r2 0x00000021 r3 0x00078ea0
- r4 0x0006ad6c r5 0x00000000 r6 0x000367bc r7 0x00078ea0
- [ 49.862762] ieee80211 phy0: brcmf_run_escan: error (-110)
- [ 49.868171] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
- [ 51.096714] loop: module loaded
- [ 53.439733] brcmfmac: brcmf_sdio_bus_rxctl: resumed on timeout
- [ 53.449934] brcmfmac: brcmf_sdio_checkdied: firmware trap in dongle
- [ 53.458001] brcmfmac: dongle trap info: type 0x3 @ epc 0x00000000
- cpsr 0x20000003 spsr 0x20000010 sp 0x0006fc0c
- lr 0x00009479 pc 0x00000000 offset 0x6fbb8
- r0 0x0005c6cc r1 0x000367bc r2 0x00000021 r3 0x00078ea0
- r4 0x0006ad6c r5 0x00000000 r6 0x000367bc r7 0x00078ea0
- [ 53.458102] ieee80211 phy0: brcmf_run_escan: error (-110)
- [ 53.463914] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
- [ 57.039682] ieee80211 phy0: brcmf_run_escan: error (-110)
- [ 57.045489] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
- [ 60.561852] ieee80211 phy0: brcmf_run_escan: error (-110)
- [ 60.567893] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
- [ 64.160267] ieee80211 phy0: brcmf_run_escan: error (-110)
- [ 64.165787] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
- [ 67.680343] ieee80211 phy0: brcmf_run_escan: error (-110)
- [ 67.685869] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
- [ 71.200130] ieee80211 phy0: brcmf_run_escan: error (-110)
- [ 71.205590] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
- [ 74.720367] ieee80211 phy0: brcmf_run_escan: error (-110)
- [ 74.725886] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
- [ 78.240359] ieee80211 phy0: brcmf_run_escan: error (-110)
- [ 78.245876] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
- [ 81.760283] ieee80211 phy0: brcmf_run_escan: error (-110)
- [ 81.765745] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
- [ 85.280514] ieee80211 phy0: brcmf_run_escan: error (-110)
- [ 85.286042] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
- [ 88.880446] ieee80211 phy0: brcmf_run_escan: error (-110)
- [ 88.885967] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
- [ 92.400331] ieee80211 phy0: brcmf_run_escan: error (-110)
- [ 92.405797] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
- [ 95.920594] ieee80211 phy0: brcmf_run_escan: error (-110)
- [ 95.926126] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
- [ 99.440550] ieee80211 phy0: brcmf_run_escan: error (-110)
- [ 99.446079] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
- [ 102.960580] ieee80211 phy0: brcmf_run_escan: error (-110)
- [ 102.966177] ieee80211 phy0: brcmf_cfg80211_scan: scan error (-110)
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement