[2019-11-12 12:36:41] [Output] : ⭐ Maximilian Bertone walks over to his toolbox, grabbing a breaker bar and a 17mm long socket.
[2019-11-12 12:36:56] [Output] : ⭐ Maximilian Bertone returns to the car, placing the elevator pads on the correct spot, aligned to the chassis.
[2019-11-12 12:37:40] [Output] : ⭐ Maximilian Bertone puts the bar on L, then goes to each wheel, breaking loose the 5 lug nuts of each.
[2019-11-12 12:38:08] [Output] : ⭐ Maximilian Bertone then presses the "UP" button on the elevator, raising the car to about knee level.
[2019-11-12 12:38:41] [Output] : ⭐ Maximilian Bertone goes over to the corner, to his toolbox, grabbing the impact gun from the charger.
[2019-11-12 12:38:52] [Output] : ⭐ Maximilian Bertone puts the 17mm socket onto the impact gun.
[2019-11-12 12:39:14] [Output] : ⭐ Maximilian Bertone puts the impact gun on L, then goes to the front-left wheel.
[2019-11-12 12:39:34] [Output] : ⭐ Maximilian Bertone takes off all of the lug nuts, one by one, then grabs the wheel with his free hand.
[2019-11-12 12:39:52] [Output] : ⭐ Maximilian Bertone bends down, placing the wheel right under the car.
[2019-11-12 12:40:11] [Output] : ⭐ Maximilian Bertone puts the lug nuts onto the lift's leg.
[2019-11-12 12:40:35] [Output] : ⭐ Maximilian Bertone goes over to the front-right wheel, then using the impact gun to take off the 5 lug nuts.
[2019-11-12 12:40:42] [Output] : Announcement: Situation at Montogomery with PD is voided!
[2019-11-12 12:40:42] [Output] : ⭐ Maximilian Bertone gets the wheel off, letting it fall to the ground.
[2019-11-12 12:41:05] [Output] : ⭐ Maximilian Bertone goes to the rear-right of the car, using the impact gun and 17mm socket in order to
[2019-11-12 12:41:22] [Output] : ⭐ Take it off, then grabbing it with one hand, then bending down, dropping it onto the floor.      ((Maximilian Bertone))
[2019-11-12 12:41:45] [Output] : ⭐ Maximilian Bertone goes over to the final wheel, where he uses the ugga dugga gun to take the lug nuts off.
[2019-11-12 12:42:01] [Output] : ⭐ Maximilian Bertone would hit the wheel with his palm, as it wouldn't come off.
[2019-11-12 12:42:11] [Output] : ⭐ It'd eventually come off, and Max would drag it off the hub, then letting it down.      ((Maximilian Bertone))
[2019-11-12 12:42:25] [Output] : ⭐ Maximilian Bertone puts the other lug nots on the lift's arm, then leaves the impact wrench onto his toolbox.
[2019-11-12 12:43:59] [Output] : ⭐ Maximilian Bertone then walks over to his toolbox, grabbing a regular sized ratchet and an 18mm socket.
[2019-11-12 12:44:51] [Output] : ⭐ Maximilian Bertone goes to the rear-left of the car, where he uses the ratchet and socket in order to
[2019-11-12 12:45:01] [Output] : ⭐ Take off the bolt holding the shock from below.      ((Maximilian Bertone))
[2019-11-12 12:45:25] [Output] : ⭐ As the assembly would drop due to no more support, Max would forcefully push onto it and      ((Maximilian Bertone))
[2019-11-12 12:45:37] [Output] : ⭐ Grip the spring, taking it out of it's place.      ((Maximilian Bertone))
[2019-11-12 12:45:50] [Output] : ⭐ Maximilian Bertone walks over to the back of the car, popping the trunk open.
[2019-11-12 12:46:11] [Output] : ⭐ Maximilian Bertone then walks over to his toolbox, getting a 13mm socket, switching it to the ratchet.
[2019-11-12 12:46:18] [Output] : ⭐ Maximilian Bertone puts the 18mm into his pocket.,
[2019-11-12 12:46:36] [Output] : ⭐ Maximilian Bertone gets the trunk carpet out of the way, then uses the 13mm socket and the ratchet
[2019-11-12 12:46:45] [Output] : ADVERT: J&H Car Parts, Selling Bucket Seats - Standalone Ecu's - Cold Air Intakes - Toyo Proxies R888R's. We are located next to the Clothing shop, On the otherside of the hospital in montgomery.  | Phone:
[2019-11-12 12:47:38] [Output] : ⭐ In order to loosen up the two nuts holding the rear-left shock from above.      ((Maximilian Bertone))
[2019-11-12 12:47:49] [Output] : ⭐ Maximilian Bertone then takes them off by hand, as the shock would then fall down to the ground.
[2019-11-12 12:48:18] [Output] : ⭐ Maximilian Bertone goes to the rear-right of the car, equipping the 18mm socket to the ratchet.
[2019-11-12 12:48:38] [Output] : ⭐ Maximilian Bertone uses the ratchet for loosening up the bolt holding the shock absorber, then takes it off by
[2019-11-12 12:48:39] [Output] : ⭐ Hand.      ((Maximilian Bertone))
[2019-11-12 12:48:52] [Output] : ⭐ Maximilian Bertone would press onto the assembly, taking the old spring out by hand.
[2019-11-12 12:49:02] [Output] : ⭐ Maximilian Bertone flips the sockets, going to the trunk of the car.
[2019-11-12 12:49:12] [Output] : ⭐ Maximilian Bertone moves the trunk carpeting away, then takes off the two nuts holding the shock.
[2019-11-12 12:49:33] [Output] : ⭐ Maximilian Bertone starts walking to the storage as the shock absorber falls to the ground.
[2019-11-12 12:49:57] [Output] : ⭐ Maximilian Bertone brings the box of the Eibach coilovers to the car.
[2019-11-12 12:50:17] [Output] : ⭐ Maximilian Bertone opens it up with his hands, then grabs the two springs from it.
[2019-11-12 12:50:27] [Output] : ⭐ Maximilian Bertone goes to his toolbox, grabbing a long iron bar.
[2019-11-12 12:51:01] [Output] : ⭐ Maximilian Bertone goes to the rear-left wheel, where he'd press with the iron bar onto the assembly.
[2019-11-12 12:51:11] [Output] : ⭐ Maximilian Bertone puts the new spring in place, then releases the pressure on the bar.
[2019-11-12 12:51:24] [Output] : ⭐ Maximilian Bertone walks over to the rear-right side of the car, where he uses the iron bar for the same proced
[2019-11-12 12:51:32] [Output] : ⭐ Procedure, then gets the spring in place.      ((Maximilian Bertone))
[2019-11-12 12:52:04] [Output] : ⭐ Maximilian Bertone goes over to the box, grabbing the two shock absorbers, leaving one at each side of the car.
[2019-11-12 12:52:38] [Output] : ⭐ Maximilian Bertone goes to the rear left side, as he leans onto the wheel well, aligning the shock and pushing
[2019-11-12 12:52:40] [Output] : ⭐ It up.      ((Maximilian Bertone))
[2019-11-12 12:53:10] [Output] : ⭐ Maximilian Bertone holds it with one hand, while using his free hand to get the two 13mm nuts onto the shock.
[2019-11-12 12:53:35] [Output] : ⭐ Maximilian Bertone then takes his ratchet, going to the wheel well.
[2019-11-12 12:54:06] [Output] : [English] [DEPARTMENT] Alexander Carplen says: SP to CMT.
[2019-11-12 12:54:12] [Output] : ⭐ Maximilian Bertone puts the 18mm bolt that holds the shock in, then screwing it by hand.
[2019-11-12 12:54:42] [Output] : [English] [DEPARTMENT] Alexander Carplen says: SP to CMT, come in.
[2019-11-12 12:54:54] [Output] : ⭐ Maximilian Bertone grabs the socket, tightening up the two nuts in the trunk.
[2019-11-12 12:55:32] [Output] : ⭐ Maximilian Bertone grabs the other rear shock absorber, aligning it to the hole and then pushing it up.
[2019-11-12 12:55:48] [Output] : ⭐ Maximilian Bertone gets the 2 nuts on by hand, then tightens them up with the socket and wrench.
[2019-11-12 12:56:02] [Output] : ⭐ Maximilian Bertone gets the 18mm socket on, then goes down the wheel arch of the rear-right of the car.
[2019-11-12 12:56:12] [Output] : ⭐ Maximilian Bertone puts the bolt on by hand, then tightens it using the ratchet.
[2019-11-12 12:56:25] [Output] : ⭐ Maximilian Bertone walks over to the rear-left side, doing the same procedure on tightening the bolt honding
[2019-11-12 12:56:28] [Output] : ⭐ The shock.      ((Maximilian Bertone))
[2019-11-12 12:56:59] [Output] : ADVERT: Needed for a proper equipment for your needs?! Visit Palomino Ammunation right next to Palomino Carshop!  | Phone: #-
[2019-11-12 12:58:34] [Output] : ADVERT: J&H Car Parts, Selling Bucket Seats - Standalone Ecu's - Cold Air Intakes - Toyo Proxies R888R's. We are located next to the Clothing shop, On the otherside of the hospital in montgomery.  | Phone:
[2019-11-12 12:59:02] [Output] : ⭐ Maximilian Bertone goes to the front-right of the car, putting the socket onto the ratchet.
[2019-11-12 12:59:22] [Output] : ⭐ Maximilian Bertone uses the ratchet in order to take off the two nuts holding the sway bar end link onto the as
[2019-11-12 12:59:26] [Output] : ⭐ Assembly and shock.      ((Maximilian Bertone))
[2019-11-12 12:59:45] [Output] : ADVERT: [SALE] 2004 Pontiac GTO | Low mileage vehicle, great condition | $10,000 or best offer!  | Phone:
[2019-11-12 13:00:30] [Output] : ⭐ Maximilian Bertone gets the 18mm back onto the ratchet, then starts loosening up the bolt holding the shock
[2019-11-12 13:00:33] [Output] : ⭐ To the assembly.      ((Maximilian Bertone))
[2019-11-12 13:00:38] [Output] : [NEWS] The lottery was drawn! Number: 92. Jackpot: $25,274
[2019-11-12 13:00:38] [Output] : Payslip
[2019-11-12 13:00:38] [Output] :
[2019-11-12 13:00:38] [Output] :   Bank Interest: $500 (≈0.88%)
[2019-11-12 13:00:38] [Output] :   Gross Income: $500
[2019-11-12 13:00:38] [Output] :   Remark(s): Transferred to your bank account.
[2019-11-12 13:00:38] [Output] :   Your employer did not pay you as you were off duty.
[2019-11-12 13:01:35] [Output] : ⭐ Maximilian Bertone takes the bolt off by hand, as the shock absorber pops off from the assembly.
[2019-11-12 13:01:49] [Output] : ⭐ Maximilian Bertone then opens up the hood, grabbing the 13mm from his pocket, putting it onto his ratchet.
[2019-11-12 13:02:30] [Output] : [RADIO] This is dispatch, we've got an incident report from Justin Black #464340, Over.
[2019-11-12 13:02:30] [Output] : [RADIO] Situation: 'I wanted to speak to a mechanic', Over.
[2019-11-12 13:02:30] [Output] : [RADIO] Location: 'Route 48 West/Sec./First Street in Blueberry, Red County', out.
[2019-11-12 13:02:49] [Output] : ⭐ Maximilian Bertone loosens the two 13mm bolts holding the strut to the strut tower with the ratchet, then
[2019-11-12 13:02:54] [Output] : ⭐ Takes them off by hand.      ((Maximilian Bertone))
[2019-11-12 13:03:11] [Output] : ⭐ Maximilian Bertone bends down, grabbing the strut as it'd sit on the assembly.
[2019-11-12 13:04:04] [Output] : ⭐ Maximilian Bertone grabs the new shock absorber, as he would align it to it's place.
[2019-11-12 13:04:27] [Output] : ⭐ Maximilian Bertone pushes it up, getting the two nuts on by hand, not tightening them up.
[2019-11-12 13:06:00] [Output] : ⭐ Maximilian Bertone then moves on to the other side of the car, the front-right.
[2019-11-12 13:06:24] [Output] : ADVERT: J&H Car Parts, Selling Bucket Seats - Standalone Ecu's - Cold Air Intakes - Toyo Proxies R888R's, A 1JZ-GTE Engine -. We are located next to the Clothing shop, On the otherside of the hospital in montgomery.  | Phone:
[2019-11-12 13:06:51] [Output] : ⭐ Maximilian Bertone takes the 17mm from his pocket, putting it onto his ratchet.
[2019-11-12 13:07:10] [Output] : ⭐ Maximilian Bertone loosens up the two nuts of the sway bar end link, then takes them off by hand.
[2019-11-12 13:07:46] [Output] : ⭐ Maximilian Bertone hooks the 18 mil to the ratchet, taking out the bolt holding the strut to the assembly.
[2019-11-12 13:08:06] [Output] : ⭐ Maximilian Bertone then moves up to the hood, taking the 13 mil.
[2019-11-12 13:08:17] [Output] : ⭐ Maximilian Bertone puts the 13 mil on, then takes off all 3 of the bolts holding the strut to the tower.
[2019-11-12 13:09:08] [Output] : ⭐ Maximilian Bertone lets the old strut drop to the floor, then goes to the coilover box, grabbing a coilover.
[2019-11-12 13:09:18] [Output] : ⭐ Maximilian Bertone returns to the front-right of the car, putting the coilover in place.
[2019-11-12 13:09:49] [Output] : ⭐ Maximilian Bertone puts one nut on by hand, then goes and brings a box with two strut bars.
[2019-11-12 13:10:03] [Output] : ⭐ Maximilian Bertone opens up the box with his hands, then slides out the front strut tower brace.
[2019-11-12 13:10:29] [Output] : ⭐ Maximilian Bertone aligns it perfectly, then takes off the only bolt holding the front-right coilover to the to
[2019-11-12 13:10:40] [Output] : ⭐ Tower, holding the coilover in place by hand.      ((Maximilian Bertone))
[2019-11-12 13:11:03] [Output] : ⭐ Maximilian Bertone quickly gets a nut on by hand, then gets the other two on.
[2019-11-12 13:11:15] [Output] : ⭐ Maximilian Bertone tightens them up with his ratchet and the 13 mil.
[2019-11-12 13:11:31] [Output] : ⭐ Maximilian Bertone goes over to the other side of the car, taking off the nuts he's screwed by hand, then align
[2019-11-12 13:11:42] [Output] : ⭐ The strut tower brace bar to the coilover.      ((Maximilian Bertone))
[2019-11-12 13:11:56] [Output] : ⭐ Maximilian Bertone holds the coilover by hand while putting a nut on, then eventually the rest of them.
[2019-11-12 13:12:03] [Output] : ⭐ Maximilian Bertone tightens them too, using his ratchet.
[2019-11-12 13:12:35] [Output] : ⭐ Maximilian Bertone then bends down to the front-left of the car, putting the 18 mil onto the ratchet.
[2019-11-12 13:13:10] [Output] : ⭐ Maximilian Bertone puts the bolt connecting the coilover to the assembly on, then tightens it with his ratchet.
[2019-11-12 13:13:17] [Output] : ⭐ Maximilian Bertone goes to the other side of the car, repeating the procedure.
[2019-11-12 13:14:01] [Output] : * Maximilian Bertone's cellphone starts to ring.
[2019-11-12 13:14:26] [Output] : ⭐ Maximilian Bertone walks to the storage, grabbing a box containing two performance sway bars.
[2019-11-12 13:14:40] [Output] : ⭐ Maximilian Bertone rips it open, taking the sway bar out by hand.
[2019-11-12 13:14:57] [Output] : ⭐ Maximilian Bertone also takes out the two bushings.
[2019-11-12 13:14:58] [Output] : ADVERT: J&H Car Parts, Selling Bucket Seats - Standalone Ecu's - Cold Air Intakes - Toyo Proxies R888R's, A 1JZ-GTE Engine -. We are located next to the Clothing shop, On the otherside of the hospital in montgomery.  | Phone:
[2019-11-12 13:15:50] [Output] : ⭐ Maximilian Bertone then goes to the lift, lifting it above head level.
[2019-11-12 13:16:03] [Output] : ⭐ As the sway bar end links are already off, he puts the 13mm on the ratchet.      ((Maximilian Bertone))
[2019-11-12 13:16:33] [Output] : ⭐ Maximilian Bertone takes off the two nuts holding the sway bar bushings with the ratchet, then repeats
[2019-11-12 13:16:34] [Output] : ADVERT: La Taberna Samu | Best drinks of Montgomery, come now! We're located near Monty Park!  | Phone: #
[2019-11-12 13:16:39] [Output] : ⭐ The action on the other side too, holding the sway bar.      ((Maximilian Bertone))
[2019-11-12 13:16:51] [Output] : ⭐ Maximilian Bertone lets the sway bar down onto the floor, then grabs the new sway bar.
[2019-11-12 13:17:00] [Output] : ADVERT: For sale - 1JZ-GTE Engine - $6000 Hit me up 450304  | Phone:
[2019-11-12 13:17:37] [Output] : ⭐ Maximilian Bertone puts the new bushings in the busing supports, then puts the sway bar in place.
[2019-11-12 13:18:02] [Output] : ⭐ Maximilian Bertone puts the right bushing on, then screws in the two nuts that hold it.
[2019-11-12 13:18:13] [Output] : ⭐ Maximilian Bertone repeats the action on the other one.
[2019-11-12 13:18:54] [Output] : ⭐ Maximilian Bertone then goes to the side of the car, grabbing the sway bar end links, while staring to the shin
[2019-11-12 13:18:57] [Output] : ⭐ Shiny new bar.      ((Maximilian Bertone))
[2019-11-12 13:19:16] [Output] : ⭐ Maximilian Bertone puts the sway bar links in place, then screws the 16mm nuts holding them to the coilover and
[2019-11-12 13:19:30] [Output] : ADVERT: J&H Car Parts, Selling Bucket Seats - Standalone Ecu's - Cold Air Intakes - Toyo Proxies R888R's, A 1JZ-GTE Engine -. We are located next to the Clothing shop, On the otherside of the hospital in montgomery.  | Phone:
[2019-11-12 13:19:30] [Output] : ADVERT: La Taberna Samu | Best drinks of Montgomery, come now! We're located near Monty Park!  | Phone: #
[2019-11-12 13:19:34] [Output] : ⭐ Assembly, then tightens them up with his ratchet and 16mm socket.      ((Maximilian Bertone))
[2019-11-12 13:20:52] [Output] : ⭐ Maximilian Bertone walks over to the rear of the car.
[2019-11-12 13:21:13] [Output] : ADVERT: Montgomery Mega Market | Now restocked with your daily needs! | Ph:
[2019-11-12 13:21:47] [Output] : ⭐ Maximilian Bertone gets the 16mm on the ratchet, then loosens down the bolt holding the sway bar to the rear-le
[2019-11-12 13:21:51] [Output] : ⭐ Left side of the chassis.      ((Maximilian Bertone))
[2019-11-12 13:22:04] [Output] : ⭐ Maximilian Bertone goes over to the rear-right side of the car, repeating the procedure.
[2019-11-12 13:22:43] [Output] : ⭐ Maximilian Bertone then puts the 13mm on, taking off the  bushings.
[2019-11-12 13:22:54] [Output] : ⭐ Maximilian Bertone gets grip of the old sway bar, letting it down onto the floor.
[2019-11-12 13:23:09] [Output] : ⭐ Maximilian Bertone goes over, grabbing the new bushings and the new rear sway bar.
[2019-11-12 13:23:25] [Output] : ⭐ Maximilian Bertone puts the sway bar in it's place, then puts one of the bushings on, putting the bolt
[2019-11-12 13:23:33] [Output] : ⭐ Holding it in by hand, then tightening it with his ratchet.      ((Maximilian Bertone))
[2019-11-12 13:23:41] [Output] : ⭐ Maximilian Bertone does the same on the other bushing.
[2019-11-12 13:23:57] [Output] : ⭐ Maximilian Bertone then grabs his ratchet, putting the 16mm on, putting the bolt holding the bar to ther
[2019-11-12 13:24:09] [Output] : ⭐ Rear-right on, then tightening it down with the ratchet.      ((Maximilian Bertone))
[2019-11-12 13:24:22] [Output] : ⭐ Maximilian Bertone repeats the action on the bolt that holds the bar to the other side of the chassis.
[2019-11-12 13:24:30] [Output] : ⭐ Maximilian Bertone then goes to the elevator, getting the car down.
[2019-11-12 13:24:57] [Output] : ⭐ Maximilian Bertone uses the ratchet to loosen up the nuts holding the rear shock absorbers to the rear strut
[2019-11-12 13:25:11] [Output] : ⭐ Towers.      ((Maximilian Bertone))
[2019-11-12 13:25:28] [Output] : ⭐ Maximilian Bertone grabs the rear strut brace from the box, then returns to the rear.
[2019-11-12 13:25:47] [Output] : ⭐ Maximilian Bertone aligns it pretty good, then puts the nuts holding the strut to the shock on by hand.
[2019-11-12 13:25:58] [Output] : ⭐ Maximilian Bertone then uses his 13mm socket and the ratchet in order to tighten them down.
[2019-11-12 13:26:13] [Output] : ⭐ Maximilian Bertone goes to the storage, grabbing the wheels with the new slicks, rolling each of them over to t
[2019-11-12 13:26:14] [Output] : ⭐ The car.      ((Maximilian Bertone))
[2019-11-12 13:26:31] [Output] : ⭐ Maximilian Bertone goes to the rear-left of the car, then lifts up the wheel, aligning it to the hub.
[2019-11-12 13:26:42] [Output] : ⭐ Maximilian Bertone pushes the wheel onto the hub, then gets the new lug nuts that came with the wheel.
[2019-11-12 13:26:52] [Output] : ⭐ Maximilian Bertone screws them in by hand.
[2019-11-12 13:26:56] [Output] : ADVERT: J&H Car Parts, Selling Bucket Seats - Standalone Ecu's - Cold Air Intakes - Toyo Proxies R888R's, A 1JZ-GTE Engine -. We are located next to the Clothing shop, On the otherside of the hospital in montgomery. | Ph: 450304
[2019-11-12 13:27:03] [Output] : ⭐ Maximilian Bertone goes to the front-left, grabbing the wheel up from the ground.
[2019-11-12 13:27:16] [Output] : ⭐ Maximilian Bertone aligns it to the hub, then pushes it in, screwing the new lug nuts in as much as they go by
[2019-11-12 13:27:17] [Output] : ⭐ Hand.      ((Maximilian Bertone))
[2019-11-12 13:27:34] [Output] : ⭐ Maximilian Bertone goes to the front-right side of the car, where he'd bend down, picking up the wheel.
[2019-11-12 13:27:34] [Output] : [RADIO] This is dispatch, we've got an incident report from Joe. #749664, Over.
[2019-11-12 13:27:34] [Output] : [RADIO] Situation: 'Do you guys have any vehicles for sale? Interested in a Subaru Impreza I see in your fence.', Over.
[2019-11-12 13:27:34] [Output] : [RADIO] Location: 'Third Street in Blueberry, Red County', out.
[2019-11-12 13:27:55] [Output] : ⭐ Maximilian Bertone puts the wheel onto the hub, then he screws the lug nuts on.
[2019-11-12 13:28:14] [Output] : ⭐ Maximilian Bertone goes to the rear-right, putting the last wheel on, then putting the lug nuts on.
[2019-11-12 13:28:22] [Output] : ⭐ Maximilian Bertone grabs his ugga dugga gun, putting it on "2"
[2019-11-12 13:28:35] [Output] : ⭐ Maximilian Bertone goes to the rear-left wheel, tightening all 5 of the nuts to about 5 ugga duggas.
[2019-11-12 13:28:49] [Output] : ⭐ Maximilian Bertone goes to the front-left wheel, where he'd tighten up the lug nuts with the ugga dugga gun.
[2019-11-12 13:29:06] [Output] : ⭐ Maximilian Bertone goes to the front-right side, tightening up the lug nuts to the hub.
[2019-11-12 13:29:26] [Output] : ⭐ Maximilian Bertone then goes to the rear-right, tightning up the final bolts.
[2019-11-12 13:29:27] [Output] : [English] [DEPARTMENT] Alexander Carplen says: SP to CMT.
[2019-11-12 13:29:34] [Output] : ⭐ Maximilian Bertone lets the car down, then laughs maniaclly.