SHARE
TWEET

Untitled

a guest Mar 29th, 2015 236 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. U-Boot 2015.01 (Mar 29 2015 - 12:41:12) Allwinner Technology
  2.  
  3. CPU:   Allwinner A20 (SUN7I)
  4. I2C:   re�dy
  5. DRAM:  2 GiB
  6. MMC:   SUNXI SD/MMC: 0
  7. *** Warning - bad CRC, using default environment
  8.  
  9. Reserved 8192kB of RAM for Framebuffer.
  10. In:    serial
  11. Out:   serial
  12. Err:   serial
  13. SCSI:  SU���SCSI INIT
  14. SATA link 0 timeout.
  15. AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
  16. flags: ncq s�ag pm led clo only pmp pio slum part ccc apst
  17. Ne�'�dwmac.1c50000
  18. (Re)start USB...
  19. USB0:   USB EHCI 1.00
  20. scanning bus 0 for devices... 1 USB Device(s) found
  21. USB1:   USB EHCI 1n00
  22. scanning bus 1 for devices... 1 USB Dmvice(s) found
  23.        scanning usb for storage devices... 0 Storage Device(s) found
  24. Hit any kY^���stop autoboot:  0
  25. switch to parti�Z�k�#0, OK
  26. mmc0 is current device
  27. Scanning mmc 0.n.
  28. Found U-Boot script /boot.scr
  29. reading /boot.scr
  30. 1764 bytes read in 23 ms (74.2 KiB/s)
  31. ## Executing script at 43100000
  32. Load Linux...
  33. reading /zImage
  34. 2653728 bytes read in 217 ms (11.7 MiB/s)
  35.  
  36. Load DTB�ɩH�reading /sun7i-a20-cubietruck.dtb
  37. 23743 bytes read in 33 ms (702.1 KiB/s)
  38.  
  39. Booting...
  40. Kernel image @ 0x42000000 [ 0x000000 - 0x287e20 ]
  41. ## Flattened Device Tree blob at 43000000
  42.    Booting using the fdt blob at 0x43000000
  43.    Loading Device Tree to 4fff7000, end 4ffffcbe ... OK
  44.  
  45. Starting kernel ...
  46. [    0.000000] Booting Linux on phy�ical CPU 0x0
  47. [    0.000000] Linux version 3.19.2 (mauro@Paxos+ (gcc version 4.9.1 20140710 (prgrelease) (crosstool-NG linaro-1.13.1-4.9-2014.07 - Linaro GCC 4.9-2014.07) ) #1 SMP Sun Mar 29 16:44:46 CEST 2015
  48. �    0.000000] CPU: ARMv7 Processor [410fc074] revision 4 (ARMv7), cr=10c5387d
  49. [    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
  50. [    0.000000] Machine �odel: Cubietech Cubietruck
  51.                                                   [    0.000000] Memory policy: Data cache writealloc
  52. [    0.000000] psci: probing for conduit method from DT.
  53. [    0.000000] psci: Using PSCI v0.1 Function IDs from DT
  54. [    0.000000] PERCPU: Embedded 7 pages/cpu @ee7dd000 s6400 r0 d22272 u32768
  55. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 520720
  56. [    0.000000] Kernel command lyne: conwole=ttyS0,115200n8 root=/dev/mmcblk0p2 rootfstype=ext4 rootdelay panic=10
  57. [    0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  58. [    0.000000] Dentry caghe hash table entries: 131072 (order: 7, 524288 bytes)
  59. [    0.000000] Inode-cache hash table ent�ZY.'�����Bzɑ��� 6, 262144 bytes)
  60. [    0.000000] Memory: 2066308K/2088960K available (3870K kernel code, 197K rwdata, 776K rodata, 240K init, 227K bss, 22652K reserved, 0K cma-reserved, 1310720K highmem)
  61. [    0.000000] Virtual kernel memory layout:
  62. [    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
  63. [    0.000000]     fixmap  : 0xffc00000 -�™���0000   (3072 kB)
  64. +�r��������    vmalloc : 0xf0000000 - 0xff000000   ( 240 MB)
  65. [    0.000000]     lowmem  : 0xc0000000 - 0xef800000   ( 760 MB)
  66. [    0.000000] �������  : 0xbfe00000 - 0xc0000000   (   2 MB)C�+�r��������      .text : 0xc0008000 - 0xc0491ab0   (4v47 kB)
  67. [    0.000000]       .data : 0xc04ce000 -��4ff460   ( 198 kB)
  68. [    0.000000]        .bss : 0xc04ff460 - 0xc0538384   ( 228 kB)
  69. [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  70. [    0.000000] Hierarchical RCU implementation.
  71. [    0.000000]  RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
  72. [    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
  73. [    0.000000] NR_IRQS:16 nr_irqs:16 16
  74. [    0.000000] Architected cp15 timer(s) running at 24.00MHz (phy�).
  75. [    0.000008] sched_clock: 56 bits at 24MHz, resolution 41nw, wraps every 2863311519744ns
  76. [    0.000020] Switching to timer-ba�"�����loop, resolution 41ns
  77. [    0.000328] sched_clock: 32 bits a� 24MHz, resolution 41ns, wraps every 178956969942ns
  78. [    0.000475] schedclck: 32 bits at 160MHz, resolution 6ns, wraps every 26843545593ns
  79. [    0.000652] Console: colour dummy device 80x30
  80. [    0.000678] Calibrating delay loop (skipped), value calculated�]����timer frequency.. 48.00 BogoMIPS (lpj=240000)
  81. [    0.000692] pid_max: d�fault: 32768 minimum: 301
  82. [    0.000801] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes)
  83. �[    0.001376] CPU: Testing write buffer coherenc^'z�58 (order: 1, 8192 bytes)
  84.                                                        [    0.001657] /cpus/cpu@0 missing c�k��frequency property
  85. [    0.001676] /cpus/cpu@1 missing clock-frequency property
  86. [    0.001689] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
  87. [    0.001748] Setting up static identit^j���for 0x4����a0 - 0x403ad2f8
  88. [    0.003075] C�UL'��ɕ���-1, cpu 1, socket 0, mpidr 80000001
  89. [    0.003151] Brought up 2 CPUs
  90. [    0.003167] SMP: Total of 2 processors activated (96.00 BogoMIPS).
  91. [    0.003174] CPU: All CPU(s) started in HYP mode.
  92. [    0.003179] CPU: Virtualization e�W�k���́available.
  93. [    0.003777] devtmpfs: initialized
  94. [    0.004539] VFP support v0.3: implementor 41 architecture 2 part 30 varia~t 7 rev 4
  95. [    0.004986] pinctrl core: initialized pinctrl subsystem
  96. [    0.010928] NEt: Registered protocol famil^��j
  97.                                                  [    0.011267] DMA: preallocated 256 Ki� p��
  98.                                                                                              2�Ɂatomic coherent allocations
  99. [    0.016959] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
  100. [    0.016976] hw-breakpoint: maximum watchpoint size is 8 bytes.
  101. [    0.023629] reg-fixed-voltage ahci-5v: could not find pctldev fo�r����/woc@01c00000/pinctrl@01c20800/ahci_pwr_pin@1, deferring probe
  102. [    0.023658] platform ahci-5v: Driver reg-fixed-voltage requests probe deferral
  103. [    0.023686] reg-fixed-volt�ge usb0-vbus: could not find pctldev for node /soc@01c00000/pinctrl@01c2080��͉�_vbus_pin@0, deferring probe
  104. [    0.023699] platfo�m usb0mvbus: Driver reg-fixed-voltage requests probe deferral
  105. [    0.023721_ reg-fixed-voltage usb1-vbus: could not find pc���فfor node /soc@01c00000/pinctrl@01c20��z�͉�_vbus_pin@0, deferring probe
  106. [    0.023732] platform usb1-vbus: Driver reg-fixed-voltage requests probe deferral
  107. �[    0.023766] platform usb2-vbus: Driver reg-fixed-voltage requests probe deferral0000/pinctrl@01g20800/usb2_vbus_pin@0, deferring probe
  108. [    0.024438] reg-f�xed-voltage vmmc3: could not find pctldev for node /soc@01c00000/pinctrl@01c20800/vmmc3_pin@0, deferring probe
  109. [    0.024456] platform vmmc3: Driver reg-fixed-voltage requests probe deferral
  110. [    0.024919] SCSI subsystem`initia�Z�VH�+�r��������usbcore: registered new interface driver usbfs
  111. [    0.025471] usbcore: registe�ed new interface driver hub
  112. [    0.025530] usbcore: registered new device driver usb
  113. [    0.025672] pps�core: LinuxPPS API ver. 1 registered
  114. [    0.025680] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  115. [    0.025707] PTP clock support registmred
  116. [    0.026671] Switched to clocksource arch_sys_counter
  117. [    p.035926] NET: Registered protocol family 2
  118. {    p.036552] TCP established hash table entries: 8392 (order: 3, 32768 bytes)
  119. [    0.036697] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
  120. [    0.036819] TCP: Hash tables configured (established 8192 b�nd 8192)
  121. [    0.036907] TCP: reno registered
  122. [    0.036923] UDP hash table entries: 512 (order: 2, 16384 bytes)
  123. [    0.036983] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  124. [    0.037222] NET: Registered protocol family 1
  125. [    0.037602] RPC: RYVkѕɕ��named UNIX socket transport module.
  126. [    0.037616] RPC: Registered udp transport module.
  127. [    0.037622] RPC: Registered tcp transport module.
  128. [    0.037628] RPC: Registered tcp NFSv4.1 ba��,+�����transport module.
  129. [    0.038189] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
  130. [    0.039296] futex hash table entries: 512 (order: 3, 32768 bytes)
  131. [    0.049195] NFS: Registering the id_resolver key type
  132. [    0.049267] Key type id_resolver registered
  133. [    0.049276] Key type id_legacy registered
  134. [    0.049454] bounce: pool size: 64 pages
  135. [    0.049665] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
  136. [    0.049685] io scheduler noop regis|ered
  137. [    0.049698] io scheduler deadline registered
  138. [    0.049872] io s�hed}ler cfq registered (default)
  139.                                                     [    0.050148] platform 1c13400.phy: Driver sun4i-usb-phy �equests probe deferral
  140. [    0.052393] sun7i-a20-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  141. [    0.108058] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled
  142. [    0.111059] console [ttyS0] disabled
  143. [    0.131220] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 41, base_baud = 1u00000) is a W6_16550A
  144. [    0.780372] console [ttyS0] enabled
  145. [    0.785471] platform 1c18000.sata: Driver ahci-sunxi requests probe deferral
  146. [    0.793555] stmmaceth 1c50000.ethernet: no regulator found
  147. [    0.799138] stmmaceth 1c50000.ethernet: no reset control found
  148. [    0.804967]  Ring mode enabled
  149. [    0.808031]  No HW DMA feature registev supported
  150. [    0.812555]  Normal descriptors
  151. [    0.815874]  TX Checksum insertion supported
  152. [    0.823711] libphy: stmmac: probed
  153. [    0.827150] eth0: PHY ID 001cc915 at 0 IRQ POLL (stmmac-0:00) active
  154. [    0.83s495] eth0: PHY ID 001cc915 at 1 IRQ POLL (stmmac-0:01)
  155. [    0.839403] ehci_hcd: U�B 2.0 'Enhanced' Host Controller (EHCI) Driver
  156. [    0.845931] ehci-platform: EHCI generic platform driver
  157. [    0.851332] platform 1c14000.usb: Driver ehci-platform requests probe deferral
  158. [    p.858644] platform 1c1c000.usb: Driver ehci-platform requests probe deferral
  159. [    0.865951] ohci_hcd: USB`1.1 'Open' Host Controller (OHCI) Driver
  160. [    0.872208] ohci-platform: OHCI generic platform driver
  161. [    0.877564] platform 1c14400.usb: Driver ohci-platform requests probe de�Y.��5
  162.                                                                                  [    0.884839] platform 1c1c400.usb: Driver ohci-platform requests probe deferral
  163. [    0.892722] sunxi-rtc 1c20d00.rtc: rtc core: registered rtcmsun�i as rtc0
  164. [    0.899561] sunxi-rtc 1c20d00.rtc: RtC enabled
  165. [    0.904101] i2c /dev entries driver
  166. [    0.908484] axp20x 0-0034: AX�&variant AXP209 found
  167. [    0.917166] axp20x 0-0034: AXP20X driver loXVVH�[    0.923396] sunxi-wdt 1c20c90.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  168. [    0.931369] Driver 'mmcblk' needs updating - please use bus_type methods
  169. [    0.938574] sunxi-m[,��f000.mmc: No vqmmc regulator found
  170. [    0.944502] sunxi-mmc 1c0f000.mmc: Got CD GPIO
  171. [    0.986826] sunxi-mmc 1c0f000.mmc: base:0xf00ae000 irq:26
  172. [    0.9;2645] platform`1c12000.mmc: Driver sunxi-mmc requests probe deferral
  173. [    1.001209] usbcore: registered new interface driver usbhid
  174. [ ��r���Š���usbhid: USB HID core driver
  175. [    1.011280] TCP: cubic registered
  176. [    1.014623] NET: Registered protocol family 17
  177. [    1.019209] Key type dns%�ͽ�ٕɁregistered
  178. [    1.023584] Registering SWP/SWPB emulation handler
  179. [    1.054474] mmc0: host does not support reading read-only switch, assuming write-enable
  180. [    1.065101] mmc0: new high speed SD card at address 0007
  181. [    1��������mmcblk0: mmc0:0007 SD02G 1.85 GiB
  182. [    1.078383]  mmgblk0: p1 p2
  183. [    1.096729] a���iչ᥁1c18000.sata: controller can't d PMP, turning off CAP_PMP
  184. [    1.104244] ahci-sunxi 1c18000.sata: SSS fla� set, parallel bus scan disabled
  185. [    1.111419] ahci-sunxi 1c18000.sata: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl platform mode
  186. [    1.120384] ahci-sunxi 1c18000.sata: flags: ncq sntf stag pm led clo only pio slum part ccc
  187. [    1.129723] scsi host0: ahci_platform
  188. [    1.133ӊ��ata1: SATA ma� UDMA/133�[[Z
  189.                                         ڵ���0x01c18000-0x01c18fff] port 0x100 irq 30
  190. [    1.142019] ehci-platform 1c14000.usb: EHCI Host Cont���5
  191.                                                             [    1.147661] ehci-platform 1c14000.usb: new USB bus registered, assZ����bus number 1
  192. [    1.155526] ehci-platform 1c14000.usb: irq 28, io mem 0x01c14000
  193. [    1.176679] ehci-platform`1c14000.usb: USB 2.0 started, EHCI 1��j
  194.                                                                     [    1.183705] hub 1KҊr���M �hub found
  195. [    1.187511] hub 1-0:1.0: 1 port detected
  196. [    1.192103] ehci-�+љ�ɵ�1c1c0�r�͉� EHCI Host Controller
  197. [    1.1;7728] ehci-platform 1c1c000.usb: new USB bus registered, assigned bus number 2
  198. [    1.205592] ehci-platform 1c1c000.usb: irq 31, io mem 0x01c1c000
  199. [    1.226678] ehci-platform 1c1c000.usb: USB 2.0 startedl EHCI 1.00
  200. [    1.233623] hub 2-��r���M �hub found
  201.                                           [    1.237427] hub 2-0:1.0: 1 port detected
  202. [    1.241931]�
  203.                k��platform 1c14400.usb: Gen�ric Platform OHCI controller
  204. [    1.248588] oh�� ��љ�ɵ�1c14400.�sbz new USB bus registered, assigned bus numfer 3
  205. [    1.256475] ohci-platform 1c14400.usb: irq 29, io mem 0x01c14400
  206. [    1.321499] hub 3-0:1.0: USB hub found
  207. [    1.325299] hub 3-0:1.0: 1 port detected
  208. [    1.329880] ohci-platform 1c1c400.usb: Generic Platform OHCI controller
  209. [    1.336517] ohci-platform 1c1c400.usb: new USB bus registered, assign�d bus number 4C�[    1�&S���ohci-platform 1c1c400.usb: irq 32, io mem 0x01c1c400
  210. [    1.411496] hub 4-0:1.0: USB hub found
  211. [    1.415283] hub 4-0:1.0: 1 port detected
  212. [    1.420149] sunxi-mmc 1c12000.mmc: No vqmmc regulator found
  213. [    1.456682] sunxi-mmc 1c12000.mmc: base:0xf00fe000 irq:27
  214. [    1.462188] sunxi-rtc 1c20d00.rtc: setting sywtem clock to 1970-01-07 02:14:40 UTC (526480)
  215. [    1.470552] sunxi-mmc 1c12000.mmc: smc 1 err, cmd 8, RTO !!
  216. [    1.480410] usb0-vbus: disabling
  217. [    1.483670] vcc5v0: disabling
  218. [    1.486688] vcc3v0: disabling
  219. [    1�������ata1: SATA li�-"�ݹ�(SStatus 0 SControl 300)
  220. [    1.499623] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  221. [    1.506621] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  222. [    1.513639] mm�1: queuing unknown CIS t�ple 0x80 (3 bytes)
  223. [    1.516329] EXT4-fs (mmcb�-��): mounted filesystem w�th ordered data mode. Opts: (null)
  224. [    1.516380] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
  225. [    1.527602] devtmpfs: mounted
  226. [    1.527876] Freeing unused kernel memory: 240K (c0492000 - c04ce000)
  227. [    1.546071] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  228. [    1.567091] mmc1: new high speed SDIO card at address 0001
  229. [    1.807705] random: init urandom`read with 7 bits of entropy available
  230. [    2.025313] init: plymouth-upstart-bridge main process (44) terminated with status 1
  231. [    2.033315] init: plymouth-upstart-bridge main process ended, respawning
  232. [    2.076124] init: plymouth-ups|art-bridge main process (=u) terminated with status 1
  233. [    2.088552] init: plymouth-upstart-bridge main process ended, respawning
  234. [    2.096020] init: ureadahead main process (46) terminated with status 5
  235. [    2.174729] init: plymouth-upstart-bridge main process (59) terminated with status 1
  236. [    2.182646] init: plymouth-upstart-bridge main process ended, respawning
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Top