Advertisement
ysa44q34z

xeno 10 dmesg

Sep 1st, 2013
146
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. <6>[ 0.000000] Initializing cgroup subsys cpu
  2. <5>[ 0.000000] Linux version 3.0.8+ (EM3066-101C@V03) (gcc version 4.4.3 (GCC) ) #388 SMP PREEMPT Mon Mar 25 18:08:32 CST 2013
  3. <4>[ 0.000000] CPU: ARMv7 Processor [413fc090] revision 0 (ARMv7), cr=10c53c7d
  4. <4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
  5. <4>[ 0.000000] Machine: RK30board
  6. <6>[ 0.000000] memory reserve: Memory(base:0x91800000 size:80M) reserved for <ion>
  7. <6>[ 0.000000] memory reserve: Memory(base:0x90c00000 size:12M) reserved for <fb0>
  8. <6>[ 0.000000] memory reserve: Memory(base:0x90000000 size:12M) reserved for <ipp buf>
  9. <6>[ 0.000000] memory reserve: Memory(base:0x8f400000 size:12M) reserved for <fb2>
  10. <6>[ 0.000000] memory reserve: Memory(base:0x8ee00000 size:6M) reserved for <camera_ipp_mem>
  11. <6>[ 0.000000] memory reserve: Total reserved 122M
  12. <4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
  13. <6>[ 0.000000] bootconsole [earlycon0] enabled
  14. <4>[ 0.000000] CPU SRAM: copied sram code from c0b16000 to fef00100 - fef01ad0
  15. <4>[ 0.000000] CPU SRAM: copied sram data from c0b179d0 to fef03000 - fef0382c
  16. <6>[ 0.000000] L310 cache controller enabled
  17. <6>[ 0.000000] l2x0: 16 ways, CACHE_ID 0x4100c0c8, AUX_CTRL 0x76050001, Cache size: 524288 B
  18. <4>[ 0.000000] DDR DEBUG: version 1.00 20121016
  19. <4>[ 0.000000] DDR DEBUG: DDR3 Device
  20. <4>[ 0.000000] DDR DEBUG: 1 CS, ROW=15, Bank=8, COL=10, Total Capability=1024MB
  21. <4>[ 0.000000] DDR DEBUG: init success!!! freq=372MHz
  22. <4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x5, DGSL=1 extra clock, DGPS=180
  23. <4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x5, DGSL=1 extra clock, DGPS=180
  24. <4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x5, DGSL=1 extra clock, DGPS=180
  25. <4>[ 0.000000] DDR DEBUG: DTONE=0x1, DTERR=0x0, DTIERR=0x0, DTPASS=0x4, DGSL=1 extra clock, DGPS=90
  26. <4>[ 0.000000] DDR DEBUG: ZERR=0, ZDONE=0, ZPD=0x0, ZPU=0x0, OPD=0x0, OPU=0x0
  27. <4>[ 0.000000] DDR DEBUG: DRV Pull-Up=0xb, DRV Pull-Dwn=0xb
  28. <4>[ 0.000000] DDR DEBUG: ODT Pull-Up=0x2, ODT Pull-Dwn=0x2
  29. <4>[ 0.000000] rk30_iomux_init
  30. <4>[ 0.000000] Boot mode: 0 flag: 0xc3524200
  31. <7>[ 0.000000] On node 0 totalpages: 230912
  32. <7>[ 0.000000] free_area_init_node: node 0, pgdat c0b153e0, node_mem_map c159c000
  33. <7>[ 0.000000] Normal zone: 1744 pages used for memmap
  34. <7>[ 0.000000] Normal zone: 0 pages reserved
  35. <7>[ 0.000000] Normal zone: 190256 pages, LIFO batch:31
  36. <7>[ 0.000000] HighMem zone: 304 pages used for memmap
  37. <7>[ 0.000000] HighMem zone: 38608 pages, LIFO batch:7
  38. <6>[ 0.000000] PERCPU: Embedded 7 pages/cpu @c1da4000 s7072 r8192 d13408 u32768
  39. <7>[ 0.000000] pcpu-alloc: s7072 r8192 d13408 u32768 alloc=8*4096
  40. <7>[ 0.000000] pcpu-alloc: [0] 0 [0] 1
  41. <4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 228864
  42. <5>[ 0.000000] Kernel command line: console=ttyFIQ0 androidboot.console=ttyFIQ0 init=/init initrd=0x62000000,0x00220000 mtdparts=rk29xxnand:0x00002000@0x00002000(misc),0x00004000@0x00004000(kernel),0x00008000@0x00008000(boot),0x00008000@0x00010000(recovery),0x000C0000@0x00018000(backup),0x00040000@0x000D8000(cache),0x00208000@0x00118000(userdata),0x00002000@0x00320000(kpanic),0x00100000@0x00322000(system),-@0x00422000(user) bootver=2013-05-18#1.32 firmware_ver=4.1.1
  43. <6>[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
  44. <6>[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  45. <6>[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  46. <6>[ 0.000000] Memory: 750MB 152MB = 902MB total
  47. <5>[ 0.000000] Memory: 894360k/894360k available, 154216k reserved, 155648K highmem
  48. <5>[ 0.000000] Virtual kernel memory layout:
  49. <5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
  50. <5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
  51. <5>[ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB)
  52. <5>[ 0.000000] vmalloc : 0xf7000000 - 0xfe800000 ( 120 MB)
  53. <5>[ 0.000000] lowmem : 0xc0000000 - 0xf6800000 ( 872 MB)
  54. <5>[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
  55. <5>[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
  56. <5>[ 0.000000] .init : 0xc0408000 - 0xc0528000 (1152 kB)
  57. <5>[ 0.000000] .text : 0xc0528000 - 0xc0ab51d4 (5685 kB)
  58. <5>[ 0.000000] .data : 0xc0ab6000 - 0xc0b15f00 ( 384 kB)
  59. <5>[ 0.000000] .bss : 0xc0b19024 - 0xc159b2f8 (10761 kB)
  60. <6>[ 0.000000] SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
  61. <6>[ 0.000000] Preemptible hierarchical RCU implementation.
  62. <6>[ 0.000000] NR_IRQS:416
  63. <4>[ 0.000000] rk30_gpio_init: 176 gpio irqs in 6 banks
  64. <6>[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
  65. <6>[ 0.000000] Console: colour dummy device 80x30
  66. <6>[ 0.004922] Calibrating delay loop (skipped) preset value.. 1631.46 BogoMIPS (lpj=8157341)
  67. <6>[ 0.013877] pid_max: default: 32768 minimum: 301
  68. <6>[ 0.019099] Mount-cache hash table entries: 512
  69. <6>[ 0.024652] Initializing cgroup subsys debug
  70. <6>[ 0.029310] Initializing cgroup subsys cpuacct
  71. <6>[ 0.034184] Initializing cgroup subsys freezer
  72. <6>[ 0.039015] CPU: Testing write buffer coherency: ok
  73. <4>[ 0.144994] CPU1: Booted secondary processor
  74. <6>[ 0.145037] Brought up 2 CPUs
  75. <6>[ 0.152858] SMP: Total of 2 processors activated (3262.93 BogoMIPS).
  76. <6>[ 0.160053] devtmpfs: initialized
  77. <6>[ 0.171097] NET: Registered protocol family 16
  78. <4>[ 0.175979] last_log: 0xee900000 0xc0b1d230
  79. <6>[ 0.282874] rk29sdk_wifi_bt_gpio_control_init: init finished
  80. <6>[ 0.293463] console [ttyFIQ0] enabled, bootconsole disabled
  81. <6>[ 0.299639] Registered FIQ tty driver ee88fc00
  82. <6>[ 0.311747] bio: create slab <bio-0> at 0
  83. <6>[ 0.316061] pwm_regulator.0: driver initialized
  84. <6>[ 0.316186] pwm_regulator.1: driver initialized
  85. <5>[ 0.316479] SCSI subsystem initialized
  86. <6>[ 0.316674] usbcore: registered new interface driver usbfs
  87. <6>[ 0.316749] usbcore: registered new interface driver hub
  88. <6>[ 0.339631] usbcore: registered new device driver usb
  89. <6>[ 0.339966] rk30_i2c rk30_i2c.0: i2c-0: RK30 I2C adapter
  90. <6>[ 0.340131] rk30_i2c rk30_i2c.1: i2c-1: RK30 I2C adapter
  91. <6>[ 0.340292] rk30_i2c rk30_i2c.2: i2c-2: RK30 I2C adapter
  92. <6>[ 0.340409] rk30_i2c rk30_i2c.3: i2c-3: RK30 I2C adapter
  93. <6>[ 0.340518] rk30_i2c rk30_i2c.4: i2c-4: RK30 I2C adapter
  94. <6>[ 0.371181] rk30-adc rk30-adc: rk30 adc: driver initialized
  95. <4>[ 0.371248] rk29_adc_battery_init
  96. <4>[ 0.371280] rk29_adc_battery_probe--1691:
  97. <4>[ 0.371379] rk29_adc_battery_lowpower_check--1563:
  98. <6>[ 0.387252] rk29_adc_battery: driver initialized
  99. <6>[ 0.387472] Advanced Linux Sound Architecture Driver Version 1.0.24.
  100. <6>[ 0.387853] Bluetooth: Core ver 2.16
  101. <6>[ 0.387904] NET: Registered protocol family 31
  102. <6>[ 0.387916] Bluetooth: HCI device and connection manager initialized
  103. <6>[ 0.387932] Bluetooth: HCI socket layer initialized
  104. <6>[ 0.387944] Bluetooth: L2CAP socket layer initialized
  105. <6>[ 0.387988] Bluetooth: SCO socket layer initialized
  106. <6>[ 0.388925] cfg80211: Calling CRDA to update world regulatory domain
  107. <4>[ 0.435262] rk fb probe ok!
  108. <6>[ 0.435337] Switching to clocksource timer1
  109. <4>[ 0.435540] lcdc0:reg_phy_base = 0x1010c000,reg_vir_base:0xf701c000
  110. <4>[ 0.435729] lcdc0: dclk:72545454>>fps:60 rk30_load_screen for lcdc0 ok!
  111. <6>[ 0.444481] Switched to NOHz mode on CPU #0
  112. <6>[ 0.445076] Switched to NOHz mode on CPU #1
  113. <4>[ 0.457105] fb0:phy:90c00000>>vir:f8000000>>len:0xc00000
  114. <4>[ 0.457273] rk_fb_register>>>>>fb0
  115. <4>[ 0.457425] rk_fb_register>>>>>fb1
  116. <4>[ 0.457439] lcdc0 wakeup from stanby
  117. <6>[ 0.457449] lcdc0 win1 open
  118. <4>[ 0.480979] rk30 lcdc0 probe ok!
  119. <4>[ 0.481035] lcdc1:reg_phy_base = 0x1010e000,reg_vir_base:0xf7028000
  120. <4>[ 0.481109] lcdc1: dclk:74250000>>fps:60 rk30_load_screen for lcdc1 ok!
  121. <4>[ 0.481131] fb2:phy:90c00000>>vir:f8000000>>len:0xc00000
  122. <4>[ 0.481320] rk_fb_register>>>>>fb2
  123. <4>[ 0.481460] rk_fb_register>>>>>fb3
  124. <4>[ 0.481471] rk30 lcdc1 probe ok!
  125. <6>[ 0.519633] NET: Registered protocol family 2
  126. <6>[ 0.519765] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  127. <6>[ 0.520098] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  128. <6>[ 0.521934] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
  129. <6>[ 0.522994] TCP: Hash tables configured (established 131072 bind 65536)
  130. <6>[ 0.523007] TCP reno registered
  131. <6>[ 0.523020] UDP hash table entries: 512 (order: 2, 16384 bytes)
  132. <6>[ 0.523059] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
  133. <6>[ 0.523400] NET: Registered protocol family 1
  134. <4>[ 0.625509] RK29 Backlight Driver Initialized.
  135. <6>[ 0.625706] Unpacking initramfs...
  136. <6>[ 0.740176] Freeing initrd memory: 2176K
  137. <6>[ 0.740357] rk30-tsadc rk30-tsadc: initialized
  138. <6>[ 0.749112] Loaded driver for PL330 DMAC-1 rk29-pl330
  139. <6>[ 0.749132] DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  140. <6>[ 0.749278] Loaded driver for PL330 DMAC-2 rk29-pl330
  141. <6>[ 0.749293] DBUFF-64x8bytes Num_Chans-7 Num_Peri-20 Num_Events-14
  142. <4>[ 0.777689] highmem bounce pool size: 64 pages
  143. <6>[ 0.777862] ashmem: initialized
  144. <6>[ 0.786843] fuse init (API version 7.16)
  145. <6>[ 0.791481] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
  146. <6>[ 0.791498] io scheduler noop registered
  147. <6>[ 0.791507] io scheduler deadline registered
  148. <6>[ 0.791553] io scheduler cfq registered (default)
  149. <6>[ 0.805647] rga: Driver loaded succesfully
  150. <6>[ 0.806221] rk_serial.0: ttyS0 at MMIO 0x10124000 (irq = 66) is a rk29_serial.0
  151. <6>[ 0.835421] rk_serial rk_serial.0: membase 0xf704c000
  152. <6>[ 0.835469] rk_serial.3: ttyS3 at MMIO 0x20068000 (irq = 69) is a rk29_serial.3
  153. <6>[ 0.875392] rk_serial rk_serial.3: membase 0xf7050000
  154. <6>[ 0.875564] Rockchip ion module(version: 1.0) is successfully loaded
  155. <6>[ 0.877087] loop: module loaded
  156. <6>[ 0.877151] Android kernel panic handler initialized (bind=kpanic)
  157. <6>[ 0.877573] PPP generic driver version 2.4.2
  158. <6>[ 0.877692] PPP Deflate Compression module registered
  159. <6>[ 0.877699] PPP BSD Compression module registered
  160. <6>[ 0.885800] PPP MPPE Compression module registered
  161. <6>[ 0.885810] NET: Registered protocol family 24
  162. <6>[ 0.885863] usbcore: registered new interface driver asix
  163. <6>[ 0.885892] usbcore: registered new interface driver cdc_ether
  164. <6>[ 0.885919] usbcore: registered new interface driver dm9620
  165. <6>[ 0.885945] usbcore: registered new interface driver SR9700_android
  166. <6>[ 0.885972] usbcore: registered new interface driver net1080
  167. <6>[ 0.885999] usbcore: registered new interface driver cdc_subset
  168. <6>[ 0.886031] usbcore: registered new interface driver zaurus
  169. <6>[ 0.886046] cdc_ncm: 04-Aug-2011
  170. <6>[ 0.886073] usbcore: registered new interface driver cdc_ncm
  171. <4>[ 0.886080] Rockchip WiFi SYS interface (V1.00) ...
  172. <6>[ 0.886107] Initializing USB Mass Storage driver...
  173. <6>[ 0.886149] usbcore: registered new interface driver usb-storage
  174. <6>[ 0.886156] USB Mass Storage support registered.
  175. <6>[ 0.886224] usbcore: registered new interface driver usbserial
  176. <6>[ 0.886250] USB Serial support registered for generic
  177. <6>[ 0.886282] usbcore: registered new interface driver usbserial_generic
  178. <6>[ 0.886289] usbserial: USB Serial Driver core
  179. <6>[ 0.886312] USB Serial support registered for GSM modem (1-port)
  180. <6>[ 0.886344] usbcore: registered new interface driver option
  181. <6>[ 0.886351] option: v0.7.2:USB Driver for GSM modems
  182. <6>[ 1.096792] DWC_OTG: ^^^^^^^^^^^^^^^^^Device Mode
  183. <6>[ 1.096812] usb20_otg usb20_otg: DWC OTG Controller
  184. <6>[ 1.096834] usb20_otg usb20_otg: new USB bus registered, assigned bus number 1
  185. <6>[ 1.096858] usb20_otg usb20_otg: irq 48, io mem 0x00000000
  186. <6>[ 1.096866] DWC_OTG: dwc_otg_hcd_start controller in device mode,everest
  187. <6>[ 1.096904] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
  188. <6>[ 1.096914] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  189. <6>[ 1.096923] usb usb1: Product: DWC OTG Controller
  190. <6>[ 1.096929] usb usb1: Manufacturer: Linux 3.0.8+ dwc_otg_hcd
  191. <6>[ 1.096936] usb usb1: SerialNumber: usb20_otg
  192. <6>[ 1.097216] hub 1-0:1.0: USB hub found
  193. <6>[ 1.097231] hub 1-0:1.0: 1 port detected
  194. <6>[ 1.097732] DWC_OTG: host20_driver_probe host2.0 reg addr: 0x101c0000 remap:0xf7100000
  195. <6>[ 1.307992] DWC_OTG: ^^^^^^^^^^^^^^^^^^Host Mode
  196. <6>[ 1.308007] usb20_host usb20_host: DWC OTG Controller
  197. <6>[ 1.308026] usb20_host usb20_host: new USB bus registered, assigned bus number 2
  198. <6>[ 1.308054] usb20_host usb20_host: irq 49, io mem 0x00000000
  199. <6>[ 1.308091] DWC_OTG: Init: Port Power? op_state=1
  200. <6>[ 1.308097] DWC_OTG: Init: Power Port (0)
  201. <6>[ 1.308128] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
  202. <6>[ 1.308138] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  203. <6>[ 1.308147] usb usb2: Product: DWC OTG Controller
  204. <6>[ 1.308153] usb usb2: Manufacturer: Linux 3.0.8+ host20_hcd
  205. <6>[ 1.308160] usb usb2: SerialNumber: usb20_host
  206. <6>[ 1.308403] hub 2-0:1.0: USB hub found
  207. <6>[ 1.308415] hub 2-0:1.0: 1 port detected
  208. <6>[ 1.309442] android_usb gadget: Mass Storage Function, version: 2009/09/11
  209. <6>[ 1.309453] android_usb gadget: Number of LUNs=2
  210. <6>[ 1.309460] lun0: LUN: removable file: (no medium)
  211. <6>[ 1.309467] lun1: LUN: removable file: (no medium)
  212. <6>[ 1.309575] android_usb gadget: android_usb ready
  213. <6>[ 1.309745] input: rk29-keypad as /devices/platform/rk29-keypad/input/input0
  214. <4>[ 1.310004] mma7660 init
  215. <6>[ 1.310396] input: gsensor as /devices/platform/rk30_i2c.0/i2c-0/0-004c/input/input1
  216. <4>[ 1.310555] i2c-core: driver [mma7660] using legacy suspend method
  217. <4>[ 1.310563] i2c-core: driver [mma7660] using legacy resume method
  218. <6>[ 1.317618] using rtc device, rtc_hym8563, for alarms
  219. <6>[ 1.317642] rtc_hym8563 1-0051: rtc core: registered rtc_hym8563 as rtc0
  220. <6>[ 1.317739] Linux video capture interface: v2.00
  221. <6>[ 1.318109] device-mapper: uevent: version 1.0.3
  222. <6>[ 1.318292] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: dm-devel@redhat.com
  223. <6>[ 1.318443] Bluetooth: HCI UART driver ver 2.2
  224. <6>[ 1.318452] Bluetooth: HCI H4 protocol initialized
  225. <6>[ 1.318459] Bluetooth: HCILL protocol initialized
  226. <6>[ 1.318563] cpuidle: using governor ladder
  227. <6>[ 1.318571] cpuidle: using governor menu
  228. <6>[ 1.378813] rk29_sdmmc_change_clk_div..1741.. newDiv=83, newCLK=298Khz [sd_mmc]
  229. <6>[ 1.383913]
  230. <6>[ 1.383915] drivers/mmc/core/core.c...1823.. ===== mmc_rescan Begin....[mmc0]
  231. <6>[ 1.389023] .Line3506..The End of SDMMC-probe Ver.3.07 The last modify date is 2012-04-23. [sd_mmc]
  232. <6>[ 1.389109] rk29_sdmmc_change_clk_div..1741.. newDiv=42, newCLK=294Khz [sdio]
  233. <6>[ 1.389202] .Line3506..The End of SDMMC-probe Ver.3.07 The last modify date is 2012-04-23. [sdio]
  234. <6>[ 1.390283] usbcore: registered new interface driver usbhid
  235. <6>[ 1.390292] usbhid: USB HID core driver
  236. <6>[ 1.390527] logger: created 256K log 'log_main'
  237. <6>[ 1.390588] logger: created 256K log 'log_events'
  238. <6>[ 1.390649] logger: created 256K log 'log_radio'
  239. <6>[ 1.390706] logger: created 256K log 'log_system'
  240. <6>[ 1.429657]
  241. <6>[ 1.429659] mmc_attach_sd..1216.. ===== Begin to identify card as SD-card. [mmc0]
  242. <3>[ 1.510849] RT5631 0-001a: dapm: unknown pin HP_L
  243. <3>[ 1.510860] RT5631 0-001a: dapm: unknown pin HP_R
  244. <6>[ 1.546060] asoc: RT5631 HiFi <-> rk29_i2s.0 mapping ok
  245. <6>[ 1.546426] ALSA device list:
  246. <6>[ 1.546434] #0: RK29_RT5631
  247. <6>[ 1.546508] GACT probability NOT on
  248. <6>[ 1.546518] Mirror/redirect action on
  249. <6>[ 1.546524] u32 classifier
  250. <6>[ 1.546528] Actions configured
  251. <6>[ 1.546535] Netfilter messages via NETLINK v0.30.
  252. <6>[ 1.546572] nf_conntrack version 0.5.0 (14008 buckets, 56032 max)
  253. <6>[ 1.546913] ctnetlink v0.93: registering with nfnetlink.
  254. <6>[ 1.546948] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
  255. <6>[ 1.546955] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
  256. <6>[ 1.547120] xt_time: kernel timezone is -0000
  257. <6>[ 1.547231] ip_tables: (C) 2000-2006 Netfilter Core Team
  258. <6>[ 1.547388] arp_tables: (C) 2002 David S. Miller
  259. <6>[ 1.547427] TCP cubic registered
  260. <6>[ 1.547764] NET: Registered protocol family 10
  261. <6>[ 1.548287] Mobile IPv6
  262. <6>[ 1.548311] ip6_tables: (C) 2000-2006 Netfilter Core Team
  263. <6>[ 1.548438] IPv6 over IPv4 tunneling driver
  264. <6>[ 1.548988] NET: Registered protocol family 17
  265. <6>[ 1.549013] NET: Registered protocol family 15
  266. <5>[ 1.549084] Bridge firewalling registered
  267. <6>[ 1.549164] Bluetooth: RFCOMM TTY layer initialized
  268. <6>[ 1.549177] Bluetooth: RFCOMM socket layer initialized
  269. <6>[ 1.549184] Bluetooth: RFCOMM ver 1.11
  270. <6>[ 1.549191] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  271. <6>[ 1.549198] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  272. <6>[ 1.549304] NET: Registered protocol family 35
  273. <6>[ 1.549499] [BT_RFKILL]: Enter rfkill_rk_init
  274. <6>[ 1.549565] [BT_RFKILL]: Request irq for bt wakeup host
  275. <6>[ 1.549582] [BT_RFKILL]: ** disable irq
  276. <6>[ 1.560895] rk29_sdmmc_change_clk_div..1741.. newDiv=2, newCLK=12375Khz [sd_mmc]
  277. <6>[ 1.560975] mmc0: new SDHC card at address e624
  278. <6>[ 1.561165] mmcblk0: mmc0:e624 SU04G 3.69 GiB
  279. <6>[ 1.572286]
  280. <6>[ 1.572288] msdos_partition..461... ==== Begin to parse sdcard-partition. [mmc0]
  281. <6>[ 1.572299] msdos_partition..530... ==== The sdcard has MBR. [mmc0]
  282. <6>[ 1.572308] msdos_partition..543... ==== partition-1, size=3868160KB [mmc0]
  283. <6>[ 1.572316] msdos_partition..571... ==== main partition-1....[mmc0]
  284. <6>[ 1.572323] mmcblk0: p1
  285. <6>[ 1.572611] mmc_rescan_try_freq..1717.. ===== Initialize SD-card successfully. [mmc0]
  286. <6>[ 1.572628]
  287. <6>[ 1.572630] drivers/mmc/core/core.c...1823.. ===== mmc_rescan Begin....[mmc1]
  288. <4>[ 1.572639]
  289. <4>[ 1.572641] =================
  290. <4>[ 1.572643] mmc_rescan..1830.. ====find no SDMMC host. [mmc1]
  291. <6>[ 1.575385] [BT_RFKILL]: bt shut off power
  292. <6>[ 1.605375] [BT_RFKILL]: rk903_26M device registered.
  293. <4>[ 1.605447]
  294. <4>[ 1.605450] sensor_mod_init..hm2057..
  295. <6>[ 1.605519] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
  296. <3>[ 1.606034]
  297. <3>[ 1.606037] rk_camera_probe Memory(start:0x8ee00000 size:0x600000) for IPP obtain
  298. <4>[ 1.606170] get cif ldo failed!
  299. <6>[ 1.606180] camera 33-0-hm2057_back: RK Camera driver attached to camera0(hm2057_back)
  300. <3>[ 1.606197] rk_camera_add_device..1007..
  301. <4>[ 1.606406]
  302. <4>[ 1.606408] sensor_probe..drivers/media/video/hm2057.c..4424..
  303. <4>[ 1.606421] hm2057 sensor_ioctrl cmd(1) on(0)
  304. <6>[ 1.608494] rtc_hym8563 1-0051: setting system clock to 2013-09-01 14:29:39 UTC (1378045779)
  305. <4>[ 1.609518]
  306. <4>[ 1.609520] hm2057 pid = 0x2056
  307. <4>[ 1.609529]
  308. <4>[ 1.609530] sensor_probe..drivers/media/video/hm2057.c..4462 ret = 0
  309. <6>[ 1.609663] camera 33-0-hm2057_back: RK Camera driver detached from camera0(hm2057_back)
  310. <4>[ 1.609675]
  311. <4>[ 1.609677] hm2057..sensor_ioctl..cmd:1
  312. <4>[ 1.609684]
  313. <4>[ 1.609685] hm2057..sensor_deactivate.. Enter
  314. <4>[ 1.609692] hm2057 sensor_ioctrl cmd(1) on(1)
  315. <4>[ 1.609711] get cif ldo failed!
  316. <6>[ 1.609718] camera 33-0-hm2057_back: Probe hm2057_back success
  317. <4>[ 1.609768] get cif ldo failed!
  318. <6>[ 1.609776] camera 33-1-gc0308_front: RK Camera driver attached to camera1(gc0308_front)
  319. <3>[ 1.609789] rk_camera_add_device..1007..
  320. <6>[ 1.612299] camera 33-1-gc0308_front: RK Camera driver detached from camera1(gc0308_front)
  321. <4>[ 1.715390] get cif ldo failed!
  322. <6>[ 1.715399] camera 33-1-gc0308_front: Probe gc0308_front success
  323. <4>[ 2.365394] rk29_adc_battery_load_capacity: open file /data/bat_last_capacity.dat failed
  324. <4>[ 2.365408] capacity = 91, new_capacity = 91, old_capacity = 91
  325. <4>[ 3.187220] buf[0]=40 buf[1]=40
  326. <6>[ 3.187344] input: eboda Touchscreen as /devices/virtual/input/input2
  327. <6>[ 3.187600] Freeing init memory: 1152K
  328. <4>[ 3.203156] init (1): /proc/1/oom_adj is deprecated, please use /proc/1/oom_score_adj instead.
  329. <6>[ 3.236861] keychord: using input dev rk29-keypad for fevent
  330. <3>[ 3.237004] init: cannot open '/initlogo.rle'
  331. <4>[ 3.500726] gp_rknand_info = : 0xeeac9000
  332. <4>[ 3.501130] request IRQ_NANDC irq , ret=0.........
  333. <4>[ 3.501357] FlashCopyProgBuf1=0xc143f000
  334. <4>[ 3.501424] ATime: 40 ns AHB: 148 timming: 1081
  335. <4>[ 3.501471] No.1 FLASH INFO:98 de 84 93 72
  336. <4>[ 3.501519] No.3 FLASH INFO:98 de 84 93 72
  337. <4>[ 3.501906] ATime: 32 ns AHB: 148 timming: 1061
  338. <4>[ 3.502105] ATime: 32 ns AHB: 148 timming: 1061
  339. <4>[ 3.502142] randomizer = 2 , EccBits = 28 pSpec->pReadRetrial = bf00b498
  340. <4>[ 3.561904] FTL INFO:Version = 438,Date = 20121130
  341. <4>[ 3.561917] totalLogicBlkRaw = 3922
  342. <4>[ 3.561938] gBootMedia = 1 gSdmmcFwPartOffset =0!
  343. <4>[ 3.561947] rknand_buffer.c version: 4.38 20121130!
  344. <5>[ 3.562104] 10 cmdlinepart partitions found on MTD device rk29xxnand
  345. <5>[ 3.562118] Creating 10 MTD partitions on "rk29xxnand":
  346. <5>[ 3.562136] 0x000000400000-0x000000800000 : "misc"
  347. <5>[ 3.563056] 0x000000800000-0x000001000000 : "kernel"
  348. <5>[ 3.563716] 0x000001000000-0x000002000000 : "boot"
  349. <5>[ 3.564317] 0x000002000000-0x000003000000 : "recovery"
  350. <5>[ 3.564861] 0x000003000000-0x00001b000000 : "backup"
  351. <5>[ 3.565793] 0x00001b000000-0x000023000000 : "cache"
  352. <5>[ 3.566447] 0x000023000000-0x000064000000 : "userdata"
  353. <5>[ 3.567907] 0x000064000000-0x000064400000 : "kpanic"
  354. <6>[ 3.570046] apanic: Bound to mtd partition 'kpanic'
  355. <6>[ 3.570057] apanic: No panic data available
  356. <5>[ 3.570075] 0x000064400000-0x000084400000 : "system"
  357. <5>[ 3.571107] 0x000084400000-0x0003d4800000 : "user"
  358. <4>[ 3.585001] startBlk = 124 sysProtAddr = 123
  359. <6>[ 3.675085] EXT4-fs (mtdblock8): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  360. <6>[ 3.785555] EXT4-fs (mtdblock6): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  361. <6>[ 3.806482] EXT4-fs (mtdblock5): mounted filesystem with ordered data mode. Opts: noauto_da_alloc
  362. <4>[ 3.816821] UMP: UMP device driver loaded
  363. <4>[ 3.826829] Mali: init_mali_clock mali_clock c0ad3900
  364. <4>[ 3.833156] Mali: Mali device driver loaded
  365. <4>[ 3.837691] rk29_ipp: module is from the staging directory, the quality is unknown, you have been warned.
  366. <4>[ 3.847709] ipp irq 47
  367. <4>[ 3.850311] IPP init, version rk30-ipp 1.001
  368. <4>[ 3.890751] mirroring: Unknown symbol video_data_to_mirroring (err 0)
  369. <4>[ 3.895530] mirroring: Unknown symbol audio_data_to_mirroring (err 0)
  370. <4>[ 3.895592] mirroring: Unknown symbol get_fb_layer_id (err 0)
  371. <3>[ 4.101649] init: cannot find '/system/vendor/bin/pvrsrvctl', disabling 'pvrsrvctl'
  372. <3>[ 4.112860] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
  373. <3>[ 4.113646] init: cannot find '/system/bin/drmservice', disabling 'drmservice'
  374. <4>[ 4.178614] vpu: power on
  375. <6>[ 4.178665] VPU_SERVICE: checking hw id 4831
  376. <4>[ 4.179007] vpu: power off...done
  377. <6>[ 4.179032] VPU_SERVICE: init success
  378. <6>[ 4.181660] rk_serial rk_serial.0: baud:9600
  379. <4>[ 4.181673] serial.0 timeout:1000000
  380. <6>[ 4.181860] rk_serial rk_serial.0: baud:9600
  381. <4>[ 4.181868] serial.0 timeout:1000000
  382. <3>[ 4.182520] init: using deprecated syntax for specifying property 'ro.product.usbfactory', use ${name} instead
  383. <3>[ 4.183948] android_usb: already disabled
  384. <6>[ 4.187660] adb_open
  385. <4>[ 4.667954] Current WiFi chip is RK903.
  386. <6>[ 4.709029] .385.. MMC0 receive the message sd-No-Media from VOLD.[sd_mmc]
  387. <6>[ 4.709050] .416.. MMC0 receive the message No-Media from VOLD. waitTimes=0 [sd_mmc]
  388. <6>[ 4.740833] .385.. MMC0 receive the message sd-Pending from VOLD.[sd_mmc]
  389. <6>[ 4.747842] .385.. MMC0 receive the message sd-Idle-Unmounted from VOLD.[sd_mmc]
  390. <6>[ 9.315387] DWC_OTG: dwc_otg_hcd_connect_detect schedule delaywork
  391. <6>[ 9.395403] DWC_OTG: dwc_otg_hcd_enable, disable host controller
  392. <6>[ 9.395427] DWC_OTG: PortPower off
  393. <6>[ 10.823248] camera 33-0-hm2057_back: RK Camera driver attached to camera0(hm2057_back)
  394. <4>[ 10.832012]
  395. <4>[ 10.832014] hm2057..sensor_ioctl..cmd:2
  396. <4>[ 10.837510]
  397. <4>[ 10.837516] hm2057..sensor_ioctl..cmd:3
  398. <3>[ 10.843246] hm2057 sensor_ioctl cmd(0x3) is unknown !
  399. <3>[ 10.848335] rk_camera_add_device..1007..
  400. <6>[ 10.852680] camera 33-0-hm2057_back: RK Camera driver detached from camera0(hm2057_back)
  401. <4>[ 10.861357]
  402. <4>[ 10.861365] hm2057..sensor_ioctl..cmd:1
  403. <4>[ 10.866911]
  404. <4>[ 10.866916] hm2057..sensor_deactivate.. Enter
  405. <4>[ 10.872885] hm2057 sensor_ioctrl cmd(1) on(1)
  406. <6>[ 10.883196] camera 33-1-gc0308_front: RK Camera driver attached to camera1(gc0308_front)
  407. <3>[ 10.886836] gc0308 sensor_ioctl cmd(0x3) is unknown !
  408. <3>[ 10.886847] rk_camera_add_device..1007..
  409. <6>[ 10.887220] camera 33-1-gc0308_front: RK Camera driver detached from camera1(gc0308_front)
  410. <6>[ 12.160852] warning: `zygote' uses 32-bit capabilities (legacy support in use)
  411. <4>[ 17.175852] mma7660_load_offset: open file /data/mma7660_lastoffset.dat failed
  412. <4>[ 17.175882] mma7660_load_offset: open file /data/mma7660_lastoffset.dat failed
  413. <4>[ 17.175893] xoffset = -1, yoffset = -1
  414. <6>[ 17.265483] [BT_RFKILL]: bt turn on power
  415. <4>[ 17.603908] Current WiFi chip is RK903.
  416. <4>[ 17.652957] =======================================================
  417. <4>[ 17.652972] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
  418. <4>[ 17.652985] =======================================================
  419. <4>[ 17.652993] RKWIFI WiFi driver (Powered by Rockchip,Ver 4.25) init.
  420. <4>[ 17.653001] dhd_module_init: Enter
  421. <4>[ 17.653008] =========== WLAN placed in POWER ON ========
  422. <3>[ 17.653058] ANDROID-ERROR) ## wifi_probe
  423. <3>[ 17.653067] ANDROID-ERROR) wifi_set_power = 1
  424. <6>[ 17.653075] rk29sdk_wifi_power: 1
  425. <6>[ 17.753494] acc_open
  426. <6>[ 17.755709] acc_release
  427. <6>[ 17.796737] rk_serial rk_serial.0: baud:9600
  428. <4>[ 17.796750] serial.0 timeout:1000000
  429. <6>[ 17.796780] rk_serial rk_serial.0: baud:9600
  430. <4>[ 17.796787] serial.0 timeout:1000000
  431. <6>[ 17.796805] rk_serial rk_serial.0: baud:115200
  432. <4>[ 17.796811] serial.0 timeout:1000000
  433. <6>[ 17.889562] wifi turn on power
  434. <3>[ 17.893534] ANDROID-ERROR) wifi_set_carddetect = 1
  435. <6>[ 17.898464] rk29sdk_wifi_set_carddetect:1
  436. <6>[ 17.903427] mmc1: slot status change detected(0-1)
  437. <4>[ 17.909434] Linux Kernel SDIO/MMC Driver
  438. <4>[ 17.913504]
  439. <4>[ 17.913507] Dongle Host Driver, version 5.90.195.26.1.9
  440. <4>[ 17.913510] Compiled in drivers/net/wireless/bcmdhd on Sep 28 2012 at 16:18:05
  441. <6>[ 18.105567]
  442. <6>[ 18.105571] drivers/mmc/core/core.c...1823.. ===== mmc_rescan Begin....[mmc1]
  443. <6>[ 18.149463]
  444. <6>[ 18.149466] mmc_attach_sdio..800.. ===== Begin to identify card as SDIO-card. [mmc1]
  445. <7>[ 18.161465] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
  446. <7>[ 18.163584] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  447. <7>[ 18.165682] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
  448. <7>[ 18.171220] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
  449. <6>[ 18.234836] rk29_sdmmc_change_clk_div..1741.. newDiv=0, newCLK=24750Khz [sdio]
  450. <6>[ 18.236844] mmc1: new high speed SDIO card at address 0001
  451. <4>[ 18.237712] FW_PATH = /system/etc/firmware/fw_RK903.bin
  452. <4>[ 18.237716] NVRAM_PATH = /system/etc/firmware/nvram_RK903_26M.cal
  453. <4>[ 18.237809] F1 signature read @0x18000000=0x16044330
  454. <4>[ 18.267474] DHD: dongle ram size is set to 294912(orig 294912)
  455. <4>[ 18.267537] dhd_bus_select_firmware_name_by_chip: firmware_path=/system/etc/firmware/fw_RK903b2.bin
  456. <4>[ 18.288858] wl_create_event_handler thr:19c started
  457. <4>[ 18.295436] wl_iw_attach thr:19d started
  458. <4>[ 18.300101] wl_iw_bt_init thr:1a0 started
  459. <4>[ 18.304448] dhd_attach thr:1a3 started
  460. <4>[ 18.309316] dhd_attach thr:1a5 started
  461. <4>[ 18.314340] dhd_attach thr:1a6 started
  462. <3>[ 18.319867] ANDROID-ERROR) wifi_get_mac_addr
  463. <4>[ 18.319892] Fianl fw_path=/system/etc/firmware/fw_RK903b2.bin
  464. <4>[ 18.319899] Fianl nv_path=/system/etc/firmware/nvram_RK903_26M.cal
  465. <4>[ 18.451242] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
  466. <3>[ 18.626542] ANDROID-ERROR) wifi_get_mac_addr
  467. <4>[ 18.634486] Firmware up: op_mode=4, Broadcom Dongle Host Driver mac=: **************
  468. <4>[ 18.705294] dhd_preinit_ioctls set keeplive failed -1
  469. <4>[ 18.713374] dhd_rx_frame: net device is NOT registered yet. drop packet
  470. <4>[ 18.720218] dhd_rx_frame: net device is NOT registered yet. drop packet
  471. <4>[ 18.727284] Firmware version = wl0: Jul 15 2012 12:54:29 version 5.90.195.26.3 FWID 01-611c5b6
  472. <4>[ 18.741203] Broadcom Dongle Host Driver: register interface [wlan0] MAC: **************
  473. <6>[ 18.749655] mmc_rescan_try_freq..1674.. ===== Initialize SDIO successfully. [mmc1]
  474. <4>[ 18.758350] dhd_module_init: Exit
  475. <4>[ 19.006600]
  476. <4>[ 19.006603] Dongle Host Driver, version 5.90.195.26.1.9
  477. <4>[ 19.006607] Compiled in drivers/net/wireless/bcmdhd on Sep 28 2012 at 16:18:05
  478. <4>[ 21.377019] rk29_adc_battery_timer_work old_capacity_mf = 79 && gBatteryData->bat_capacity=79
  479. <4>[ 21.377065] rk29_adc_battery_timer_work gBatteryData->bat_voltage=3923
  480. <4>[ 22.251714] wl_bss_connect_done succeeded
  481. <4>[ 22.329172] wl_bss_connect_done succeeded
  482. <6>[ 22.339773] .385.. MMC0 receive the message sd-Checking from VOLD.[sd_mmc]
  483. <6>[ 22.365745] .385.. MMC0 receive the message sd-Mounted from VOLD.[sd_mmc]
  484. <3>[ 22.379273] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
  485. <6>[ 22.927589] rk_serial rk_serial.0: baud:1500000
  486. <4>[ 22.927606] serial.0 timeout:1000000
  487. <7>[ 29.395442] wlan0: no IPv6 routers present
  488. <6>[ 31.944121] rk30-hdmi rk30-hdmi: Removed.
  489. <6>[ 168.796401] binder: 271:282 transaction failed 29189, size 232-0
  490. <6>[ 168.802558] binder: 271:282 transaction failed 29189, size 232-0
  491. <6>[ 169.783861] binder: 271:283 transaction failed 29189, size 232-0
  492. <6>[ 169.790777] binder: 271:283 transaction failed 29189, size 232-0
  493. <6>[ 169.805603] binder: 271:283 transaction failed 29189, size 232-0
  494. <6>[ 169.819173] binder: 271:283 transaction failed 29189, size 232-0
  495. <6>[ 169.823715] binder: 271:283 transaction failed 29189, size 232-0
  496. <6>[ 169.832883] binder: 271:283 transaction failed 29189, size 232-0
  497. <6>[ 170.003679] binder: 271:493 transaction failed 29189, size 232-0
  498. <6>[ 170.011668] binder: 271:493 transaction failed 29189, size 232-0
  499. <3>[ 190.817847] init: untracked pid 1351 exited
  500. <3>[ 194.061989] init: untracked pid 1171 exited
Advertisement
RAW Paste Data Copied
Advertisement