Guest User

dmesg-4.20.0-1083-ayufan-g686e1f1aa461-sata-errors-in-mkfs.t

a guest
Jan 12th, 2019
251
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034]
  2. [ 0.000000] Linux version 4.20.0-1083-ayufan-g686e1f1aa461 (root@runner-f725ff63-project-6422644-concurrent-0) (gcc version 7.3.0 (Ubuntu/Linaro 7.3.0-16ubuntu3)) #ayufan SMP PREEMPT Sun Dec 30 13:42:26 UTC 2018
  3. [ 0.000000] Machine model: Pine64 RockPro64
  4. [ 0.000000] earlycon: uart8250 at MMIO32 0x00000000ff1a0000 (options '')
  5. [ 0.000000] printk: bootconsole [uart8250] enabled
  6. [ 0.000000] efi: Getting EFI parameters from FDT:
  7. [ 0.000000] efi: UEFI not found.
  8. [ 0.000000] cma: Reserved 16 MiB at 0x00000000f7000000
  9. [ 0.000000] NUMA: No NUMA configuration found
  10. [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000000f7ffffff]
  11. [ 0.000000] NUMA: NODE_DATA [mem 0xf6fa3840-0xf6fa4fff]
  12. [ 0.000000] Zone ranges:
  13. [ 0.000000] DMA32 [mem 0x0000000000200000-0x00000000f7ffffff]
  14. [ 0.000000] Normal empty
  15. [ 0.000000] Movable zone start for each node
  16. [ 0.000000] Early memory node ranges
  17. [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000f7ffffff]
  18. [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000000f7ffffff]
  19. [ 0.000000] On node 0 totalpages: 1015296
  20. [ 0.000000] DMA32 zone: 15864 pages used for memmap
  21. [ 0.000000] DMA32 zone: 0 pages reserved
  22. [ 0.000000] DMA32 zone: 1015296 pages, LIFO batch:63
  23. [ 0.000000] psci: probing for conduit method from DT.
  24. [ 0.000000] psci: PSCIv1.0 detected in firmware.
  25. [ 0.000000] psci: Using standard PSCI v0.2 function IDs
  26. [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
  27. [ 0.000000] psci: SMC Calling Convention v1.0
  28. [ 0.000000] random: get_random_bytes called from start_kernel+0xa8/0x418 with crng_init=0
  29. [ 0.000000] percpu: Embedded 23 pages/cpu @(____ptrval____) s55896 r8192 d30120 u94208
  30. [ 0.000000] pcpu-alloc: s55896 r8192 d30120 u94208 alloc=23*4096
  31. [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5
  32. [ 0.000000] Detected VIPT I-cache on CPU0
  33. [ 0.000000] CPU features: enabling workaround for ARM erratum 845719
  34. [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
  35. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 999432
  36. [ 0.000000] Policy zone: DMA32
  37. [ 0.000000] Kernel command line: earlycon=uart8250,mmio32,0xff1a0000 rw panic=10 init=/sbin/init coherent_pool=1M ethaddr=9e:da:8f:ae:43:c3 eth1addr= serial=96ed659a4f7abc3 cgroup_enable=cpuset cgroup_memory=1 cgroup_enable=memory swapaccount=1 root=LABEL=linux-root rootwait rootfstype=ext4
  38. [ 0.000000] Memory: 3942840K/4061184K available (18044K kernel code, 1896K rwdata, 7376K rodata, 1536K init, 480K bss, 101960K reserved, 16384K cma-reserved)
  39. [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
  40. [ 0.000000] rcu: Preemptible hierarchical RCU implementation.
  41. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=6.
  42. [ 0.000000] Tasks RCU enabled.
  43. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
  44. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=6
  45. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  46. [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode
  47. [ 0.000000] GICv3: Distributor has no Range Selector support
  48. [ 0.000000] GICv3: no VLPI support, no direct LPI support
  49. [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fef00000
  50. [ 0.000000] ITS [mem 0xfee20000-0xfee3ffff]
  51. [ 0.000000] ITS@0x00000000fee20000: allocated 65536 Devices @f6880000 (flat, esz 8, psz 64K, shr 0)
  52. [ 0.000000] ITS: using cache flushing for cmd queue
  53. [ 0.000000] GICv3: using LPI property table @0x00000000f6840000
  54. [ 0.000000] GIC: using cache flushing for LPI property table
  55. [ 0.000000] GICv3: CPU0: using allocated LPI pending table @0x00000000f6850000
  56. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
  57. [ 0.000000] GICv3: GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
  58. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  59. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  60. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  61. [ 0.000000] rockchip_mmc_get_phase: invalid clk rate
  62. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  63. [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  64. [ 0.000006] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  65. [ 0.002915] Console: colour dummy device 80x25
  66. [ 0.003338] printk: console [tty0] enabled
  67. [ 0.003735] printk: bootconsole [uart8250] disabled
  68. [ 0.004301] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  69. [ 0.004336] pid_max: default: 32768 minimum: 301
  70. [ 0.004471] LSM: Security Framework initializing
  71. [ 0.006531] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
  72. [ 0.007593] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
  73. [ 0.007678] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
  74. [ 0.007732] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
  75. [ 0.030980] ASID allocator initialised with 32768 entries
  76. [ 0.038979] rcu: Hierarchical SRCU implementation.
  77. [ 0.047108] Platform MSI: interrupt-controller@fee20000 domain created
  78. [ 0.047544] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
  79. [ 0.051998] EFI services will not be available.
  80. [ 0.059901] smp: Bringing up secondary CPUs ...
  81. [ 0.092112] Detected VIPT I-cache on CPU1
  82. [ 0.092148] GICv3: CPU1: found redistributor 1 region 0:0x00000000fef20000
  83. [ 0.092164] GICv3: CPU1: using allocated LPI pending table @0x00000000f6860000
  84. [ 0.092208] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  85. [ 0.124193] Detected VIPT I-cache on CPU2
  86. [ 0.124222] GICv3: CPU2: found redistributor 2 region 0:0x00000000fef40000
  87. [ 0.124234] GICv3: CPU2: using allocated LPI pending table @0x00000000f6870000
  88. [ 0.124265] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  89. [ 0.156292] Detected VIPT I-cache on CPU3
  90. [ 0.156319] GICv3: CPU3: found redistributor 3 region 0:0x00000000fef60000
  91. [ 0.156331] GICv3: CPU3: using allocated LPI pending table @0x00000000f6900000
  92. [ 0.156361] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  93. [ 0.190989] CPU features: enabling workaround for EL2 vector hardening
  94. [ 0.191507] Detected PIPT I-cache on CPU4
  95. [ 0.192712] GICv3: CPU4: found redistributor 100 region 0:0x00000000fef80000
  96. [ 0.193160] GICv3: CPU4: using allocated LPI pending table @0x00000000f6910000
  97. [ 0.194342] CPU4: Booted secondary processor 0x0000000100 [0x410fd082]
  98. [ 0.230563] Detected PIPT I-cache on CPU5
  99. [ 0.231696] GICv3: CPU5: found redistributor 101 region 0:0x00000000fefa0000
  100. [ 0.232116] GICv3: CPU5: using allocated LPI pending table @0x00000000f6920000
  101. [ 0.233182] CPU5: Booted secondary processor 0x0000000101 [0x410fd082]
  102. [ 0.236956] smp: Brought up 1 node, 6 CPUs
  103. [ 0.237352] SMP: Total of 6 processors activated.
  104. [ 0.237389] CPU features: detected: GIC system register CPU interface
  105. [ 0.237416] CPU features: detected: 32-bit EL0 Support
  106. [ 0.237447] CPU features: detected: CRC32 instructions
  107. [ 0.260087] CPU: All CPU(s) started at EL2
  108. [ 0.260588] alternatives: patching kernel code
  109. [ 0.264989] devtmpfs: initialized
  110. [ 0.283542] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  111. [ 0.283775] futex hash table entries: 2048 (order: 5, 131072 bytes)
  112. [ 0.285320] xor: measuring software checksum speed
  113. [ 0.323088] 8regs : 1154.000 MB/sec
  114. [ 0.363283] 8regs_prefetch: 1031.000 MB/sec
  115. [ 0.403511] 32regs : 1421.000 MB/sec
  116. [ 0.443724] 32regs_prefetch: 1194.000 MB/sec
  117. [ 0.443744] xor: using function: 32regs (1421.000 MB/sec)
  118. [ 0.443799] pinctrl core: initialized pinctrl subsystem
  119. [ 0.447948] DMI not present or invalid.
  120. [ 0.449397] NET: Registered protocol family 16
  121. [ 0.456208] audit: initializing netlink subsys (disabled)
  122. [ 0.456777] audit: type=2000 audit(0.448:1): state=initialized audit_enabled=0 res=1
  123. [ 0.463488] cpuidle: using governor menu
  124. [ 0.465263] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
  125. [ 0.465353] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  126. [ 0.474701] DMA: preallocated 1024 KiB pool for atomic allocations
  127. [ 0.480488] Serial: AMBA PL011 UART driver
  128. [ 0.599374] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  129. [ 0.601549] cryptd: max_cpu_qlen set to 1000
  130. [ 0.674484] raid6: int64x1 gen() 218 MB/s
  131. [ 0.742604] raid6: int64x1 xor() 220 MB/s
  132. [ 0.811004] raid6: int64x2 gen() 338 MB/s
  133. [ 0.879713] raid6: int64x2 xor() 300 MB/s
  134. [ 0.948071] raid6: int64x4 gen() 521 MB/s
  135. [ 1.016373] raid6: int64x4 xor() 383 MB/s
  136. [ 1.084807] raid6: int64x8 gen() 490 MB/s
  137. [ 1.153218] raid6: int64x8 xor() 375 MB/s
  138. [ 1.221891] raid6: neonx1 gen() 362 MB/s
  139. [ 1.290151] raid6: neonx1 xor() 427 MB/s
  140. [ 1.358582] raid6: neonx2 gen() 584 MB/s
  141. [ 1.426861] raid6: neonx2 xor() 604 MB/s
  142. [ 1.495273] raid6: neonx4 gen() 756 MB/s
  143. [ 1.563575] raid6: neonx4 xor() 723 MB/s
  144. [ 1.631948] raid6: neonx8 gen() 822 MB/s
  145. [ 1.700291] raid6: neonx8 xor() 768 MB/s
  146. [ 1.700310] raid6: using algorithm neonx8 gen() 822 MB/s
  147. [ 1.700329] raid6: .... xor() 768 MB/s, rmw enabled
  148. [ 1.700348] raid6: using neon recovery algorithm
  149. [ 1.702736] ACPI: Interpreter disabled.
  150. [ 1.706593] vcc3v3_pcie: supplied by dc_12v
  151. [ 1.709458] vcc_sys: supplied by dc_12v
  152. [ 1.713773] vgaarb: loaded
  153. [ 1.714588] SCSI subsystem initialized
  154. [ 1.715545] libata version 3.00 loaded.
  155. [ 1.716042] usbcore: registered new interface driver usbfs
  156. [ 1.716151] usbcore: registered new interface driver hub
  157. [ 1.716513] usbcore: registered new device driver usb
  158. [ 1.719115] media: Linux media interface: v0.10
  159. [ 1.719275] videodev: Linux video capture interface: v2.00
  160. [ 1.719560] pps_core: LinuxPPS API ver. 1 registered
  161. [ 1.719583] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  162. [ 1.719632] PTP clock support registered
  163. [ 1.723476] Advanced Linux Sound Architecture Driver Initialized.
  164. [ 1.724749] Bluetooth: Core ver 2.22
  165. [ 1.724904] NET: Registered protocol family 31
  166. [ 1.724924] Bluetooth: HCI device and connection manager initialized
  167. [ 1.724970] Bluetooth: HCI socket layer initialized
  168. [ 1.724995] Bluetooth: L2CAP socket layer initialized
  169. [ 1.725047] Bluetooth: SCO socket layer initialized
  170. [ 1.725096] NetLabel: Initializing
  171. [ 1.725113] NetLabel: domain hash size = 128
  172. [ 1.725130] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
  173. [ 1.725264] NetLabel: unlabeled traffic allowed by default
  174. [ 1.729623] clocksource: Switched to clocksource arch_sys_counter
  175. [ 1.730955] VFS: Disk quotas dquot_6.6.0
  176. [ 1.731083] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  177. [ 1.731489] pnp: PnP ACPI: disabled
  178. [ 1.748603] NET: Registered protocol family 2
  179. [ 1.751633] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
  180. [ 1.751869] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
  181. [ 1.752426] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
  182. [ 1.753202] TCP: Hash tables configured (established 32768 bind 32768)
  183. [ 1.754515] UDP hash table entries: 2048 (order: 4, 65536 bytes)
  184. [ 1.754734] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
  185. [ 1.755184] NET: Registered protocol family 1
  186. [ 1.758419] RPC: Registered named UNIX socket transport module.
  187. [ 1.758461] RPC: Registered udp transport module.
  188. [ 1.758480] RPC: Registered tcp transport module.
  189. [ 1.758498] RPC: Registered tcp NFSv4.1 backchannel transport module.
  190. [ 1.760858] PCI: CLS 0 bytes, default 64
  191. [ 1.761944] Trying to unpack rootfs image as initramfs...
  192. [ 2.220294] Freeing initrd memory: 5544K
  193. [ 2.230708] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
  194. [ 2.233351] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
  195. [ 2.234258] kvm [1]: 8-bit VMID
  196. [ 2.234289] kvm [1]: IPA Size Limit: 40bits
  197. [ 2.235935] kvm [1]: vgic-v2@fff20000
  198. [ 2.236156] kvm [1]: GIC system register CPU interface enabled
  199. [ 2.239129] kvm [1]: vgic interrupt IRQ10
  200. [ 2.242467] kvm [1]: Hyp mode initialized successfully
  201. [ 2.742113] workingset: timestamp_bits=44 max_order=20 bucket_order=0
  202. [ 2.760366] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  203. [ 2.762590] NFS: Registering the id_resolver key type
  204. [ 2.762738] Key type id_resolver registered
  205. [ 2.762756] Key type id_legacy registered
  206. [ 2.762790] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  207. [ 2.762812] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  208. [ 2.764849] fuse init (API version 7.28)
  209. [ 2.766458] 9p: Installing v9fs 9p2000 file system support
  210. [ 4.007714] NET: Registered protocol family 38
  211. [ 4.025765] Key type asymmetric registered
  212. [ 4.025833] Asymmetric key parser 'x509' registered
  213. [ 4.026091] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
  214. [ 4.027405] io scheduler noop registered
  215. [ 4.027871] io scheduler cfq registered (default)
  216. [ 4.027895] io scheduler mq-deadline registered
  217. [ 4.027915] io scheduler kyber registered
  218. [ 4.038786] vcc5v0_host: supplied by vcc_sys
  219. [ 4.039211] phy phy-ff770000.syscon:usb2-phy@e450.1: Linked as a consumer to regulator.6
  220. [ 4.042861] phy phy-ff770000.syscon:usb2-phy@e460.3: Linked as a consumer to regulator.6
  221. [ 4.097696] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
  222. [ 4.097764] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
  223. [ 4.103781] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
  224. [ 4.103876] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
  225. [ 4.113949] pwm-regulator: supplied by vcc_sys
  226. [ 4.114496] vcc3v3_sys: supplied by vcc_sys
  227. [ 4.114586] vcc5v0_typec: supplied by vcc_sys
  228. [ 4.126435] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
  229. [ 4.130839] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 37, base_baud = 1500000) is a 16550A
  230. [ 4.132455] ff1a0000.serial: ttyS2 at MMIO 0xff1a0000 (irq = 38, base_baud = 1500000) is a 16550A
  231. [ 4.248798] printk: console [ttyS2] enabled
  232. [ 4.251928] SuperH (H)SCI(F) driver initialized
  233. [ 4.253789] msm_serial: driver initialized
  234. [ 4.277184] cacheinfo: Unable to detect cache hierarchy for CPU 0
  235. [ 4.301145] brd: module loaded
  236. [ 4.317160] loop: module loaded
  237. [ 4.367340] rockchip-spi ff1d0000.spi: Failed to request TX DMA channel
  238. [ 4.367981] rockchip-spi ff1d0000.spi: Failed to request RX DMA channel
  239. [ 4.372368] m25p80 spi0.0: gd25q128 (16384 Kbytes)
  240. [ 4.384948] 3 fixed-partitions partitions found on MTD device spi0.0
  241. [ 4.385621] Creating 3 MTD partitions on "spi0.0":
  242. [ 4.386074] 0x000000000000-0x0000003f8000 : "loader"
  243. [ 4.389030] 0x0000003f8000-0x000000400000 : "env"
  244. [ 4.391549] 0x0000007c0000-0x000000800000 : "vendor"
  245. [ 4.399335] libphy: Fixed MDIO Bus: probed
  246. [ 4.402435] tun: Universal TUN/TAP device driver, 1.6
  247. [ 4.408231] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
  248. [ 4.408814] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
  249. [ 4.410668] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
  250. [ 4.411317] igb: Copyright (c) 2007-2014 Intel Corporation.
  251. [ 4.411925] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
  252. [ 4.412633] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
  253. [ 4.414345] sky2: driver version 1.30
  254. [ 4.418136] rk_gmac-dwmac fe300000.ethernet: PTP uses main clock
  255. [ 4.418918] rk_gmac-dwmac fe300000.ethernet: Linked as a consumer to regulator.4
  256. [ 4.419594] rk_gmac-dwmac fe300000.ethernet: clock input or output? (input).
  257. [ 4.420234] rk_gmac-dwmac fe300000.ethernet: TX delay(0x28).
  258. [ 4.420751] rk_gmac-dwmac fe300000.ethernet: RX delay(0x20).
  259. [ 4.421571] rk_gmac-dwmac fe300000.ethernet: integrated PHY? (no).
  260. [ 4.422186] rk_gmac-dwmac fe300000.ethernet: cannot get clock clk_mac_speed
  261. [ 4.422816] rk_gmac-dwmac fe300000.ethernet: clock input from PHY
  262. [ 4.428378] rk_gmac-dwmac fe300000.ethernet: init for RGMII
  263. [ 4.431273] rk_gmac-dwmac fe300000.ethernet: User ID: 0x10, Synopsys ID: 0x35
  264. [ 4.431923] rk_gmac-dwmac fe300000.ethernet: DWMAC1000
  265. [ 4.432402] rk_gmac-dwmac fe300000.ethernet: DMA HW capability register supported
  266. [ 4.433079] rk_gmac-dwmac fe300000.ethernet: RX Checksum Offload Engine supported
  267. [ 4.433769] rk_gmac-dwmac fe300000.ethernet: COE Type 2
  268. [ 4.434247] rk_gmac-dwmac fe300000.ethernet: TX Checksum insertion supported
  269. [ 4.434882] rk_gmac-dwmac fe300000.ethernet: Wake-Up On Lan supported
  270. [ 4.435499] rk_gmac-dwmac fe300000.ethernet: Normal descriptors
  271. [ 4.436038] rk_gmac-dwmac fe300000.ethernet: Ring mode enabled
  272. [ 4.436568] rk_gmac-dwmac fe300000.ethernet: Enable RX Mitigation via HW Watchdog Timer
  273. [ 4.578071] libphy: stmmac: probed
  274. [ 4.578441] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
  275. [ 4.579564] RTL8211F Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
  276. [ 4.584282] pegasus: v0.9.3 (2013/04/25), Pegasus/Pegasus II USB Ethernet driver
  277. [ 4.585174] usbcore: registered new interface driver pegasus
  278. [ 4.585881] usbcore: registered new interface driver rtl8150
  279. [ 4.586482] usbcore: registered new interface driver r8152
  280. [ 4.587139] usbcore: registered new interface driver asix
  281. [ 4.587686] usbcore: registered new interface driver ax88179_178a
  282. [ 4.588309] usbcore: registered new interface driver cdc_ether
  283. [ 4.588897] usbcore: registered new interface driver dm9601
  284. [ 4.589508] usbcore: registered new interface driver CoreChips
  285. [ 4.590119] usbcore: registered new interface driver smsc75xx
  286. [ 4.590707] usbcore: registered new interface driver smsc95xx
  287. [ 4.591282] usbcore: registered new interface driver net1080
  288. [ 4.591866] usbcore: registered new interface driver plusb
  289. [ 4.592419] usbcore: registered new interface driver cdc_subset
  290. [ 4.593011] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
  291. [ 4.593830] usbcore: registered new interface driver cdc_ncm
  292. [ 4.594986] VFIO - User Level meta-driver version: 0.3
  293. [ 4.599529] dwc3 fe800000.dwc3: Failed to get clk 'ref': -2
  294. [ 4.615607] OF: graph: no port node found in /syscon@ff770000/usb2-phy@e450/otg-port
  295. [ 4.622569] dwc3 fe900000.dwc3: Failed to get clk 'ref': -2
  296. [ 4.634532] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  297. [ 4.635172] ehci-pci: EHCI PCI platform driver
  298. [ 4.635712] ehci-platform: EHCI generic platform driver
  299. [ 4.638779] ehci-platform fe380000.usb: EHCI Host Controller
  300. [ 4.639329] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 1
  301. [ 4.642996] ehci-platform fe380000.usb: irq 30, io mem 0xfe380000
  302. [ 4.657365] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
  303. [ 4.659617] hub 1-0:1.0: USB hub found
  304. [ 4.660029] hub 1-0:1.0: 1 port detected
  305. [ 4.663902] ehci-platform fe3c0000.usb: EHCI Host Controller
  306. [ 4.664445] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 2
  307. [ 4.668554] ehci-platform fe3c0000.usb: irq 32, io mem 0xfe3c0000
  308. [ 4.681344] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
  309. [ 4.683095] hub 2-0:1.0: USB hub found
  310. [ 4.683488] hub 2-0:1.0: 1 port detected
  311. [ 4.684989] ehci-orion: EHCI orion driver
  312. [ 4.685994] ehci-exynos: EHCI EXYNOS driver
  313. [ 4.686650] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  314. [ 4.687332] ohci-pci: OHCI PCI platform driver
  315. [ 4.687870] ohci-platform: OHCI generic platform driver
  316. [ 4.688693] ohci-platform fe3a0000.usb: Generic Platform OHCI controller
  317. [ 4.689692] ohci-platform fe3a0000.usb: new USB bus registered, assigned bus number 3
  318. [ 4.692440] ohci-platform fe3a0000.usb: irq 31, io mem 0xfe3a0000
  319. [ 4.754577] hub 3-0:1.0: USB hub found
  320. [ 4.754961] hub 3-0:1.0: 1 port detected
  321. [ 4.756668] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
  322. [ 4.757579] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 4
  323. [ 4.759399] ohci-platform fe3e0000.usb: irq 33, io mem 0xfe3e0000
  324. [ 4.822689] hub 4-0:1.0: USB hub found
  325. [ 4.823070] hub 4-0:1.0: 1 port detected
  326. [ 4.824618] ohci-exynos: OHCI EXYNOS driver
  327. [ 4.827018] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  328. [ 4.827552] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 5
  329. [ 4.831598] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  330. [ 4.832535] xhci-hcd xhci-hcd.0.auto: irq 219, io mem 0xfe800000
  331. [ 4.835149] hub 5-0:1.0: USB hub found
  332. [ 4.835541] hub 5-0:1.0: 1 port detected
  333. [ 4.836412] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
  334. [ 4.836926] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 6
  335. [ 4.837691] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
  336. [ 4.838363] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
  337. [ 4.840028] hub 6-0:1.0: USB hub found
  338. [ 4.840447] hub 6-0:1.0: 1 port detected
  339. [ 4.842224] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  340. [ 4.842809] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7
  341. [ 4.846011] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000000002010010
  342. [ 4.847022] xhci-hcd xhci-hcd.1.auto: irq 220, io mem 0xfe900000
  343. [ 4.849371] hub 7-0:1.0: USB hub found
  344. [ 4.849779] hub 7-0:1.0: 1 port detected
  345. [ 4.850738] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
  346. [ 4.851273] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 8
  347. [ 4.852045] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
  348. [ 4.852727] usb usb8: We don't know the algorithms for LPM for this host, disabling LPM.
  349. [ 4.854622] hub 8-0:1.0: USB hub found
  350. [ 4.855031] hub 8-0:1.0: 1 port detected
  351. [ 4.857061] usbcore: registered new interface driver usb-storage
  352. [ 4.867722] i2c /dev entries driver
  353. [ 4.878354] rk808 0-001b: chip id: 0x0
  354. [ 4.884857] rk808-regulator rk808-regulator: there is no dvs0 gpio
  355. [ 4.885614] rk808-regulator rk808-regulator: there is no dvs1 gpio
  356. [ 4.886282] DCDC_REG1: supplied by vcc_sys
  357. [ 4.888040] DCDC_REG2: supplied by vcc_sys
  358. [ 4.889101] DCDC_REG3: supplied by vcc_sys
  359. [ 4.890001] DCDC_REG4: supplied by vcc_sys
  360. [ 4.891111] LDO_REG1: supplied by vcc_sys
  361. [ 4.893031] LDO_REG2: supplied by vcc_sys
  362. [ 4.893709] vcc2v8_dvp: Bringing 3000000uV into 2800000-2800000uV
  363. [ 4.895250] LDO_REG3: supplied by vcc_sys
  364. [ 4.896742] LDO_REG4: supplied by vcc_sys
  365. [ 4.897358] vcc_sdio: Bringing 3300000uV into 3000000-3000000uV
  366. [ 4.899133] LDO_REG5: supplied by vcc_sys
  367. [ 4.900557] LDO_REG6: supplied by vcc_sys
  368. [ 4.902171] LDO_REG7: supplied by vcc_sys
  369. [ 4.903543] LDO_REG8: supplied by vcc_sys
  370. [ 4.905084] SWITCH_REG1: supplied by vcc3v3_sys
  371. [ 4.905978] SWITCH_REG2: supplied by vcc3v3_sys
  372. [ 4.911048] rk808-rtc rk808-rtc: registered as rtc0
  373. [ 4.912995] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
  374. [ 4.913754] fan53555-reg: supplied by vcc_sys
  375. [ 4.915815] vcc1v8_s3: supplied by vcc_1v8
  376. [ 4.917620] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
  377. [ 4.918283] fan53555-reg: supplied by vcc_sys
  378. [ 4.919481] random: fast init done
  379. [ 4.930545] rockchip-rga ff680000.rga: HW Version: 0x03.02
  380. [ 4.942014] rockchip-rga ff680000.rga: Registered rockchip-rga as /dev/video0
  381. [ 4.944551] rockchip-iodomain ff320000.syscon:io-domains: Linked as a consumer to regulator.21
  382. [ 4.946080] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.14
  383. [ 4.946965] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.20
  384. [ 4.947849] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.17
  385. [ 4.948730] rockchip-iodomain ff770000.syscon:io-domains: Linked as a consumer to regulator.21
  386. [ 4.963524] Bluetooth: HCI UART driver ver 2.3
  387. [ 4.965903] cpu cpu0: Linked as a consumer to regulator.11
  388. [ 4.966555] cpu cpu0: Dropping the link to regulator.11
  389. [ 4.967417] cpu cpu0: Linked as a consumer to regulator.11
  390. [ 4.970235] cpu cpu4: Linked as a consumer to regulator.24
  391. [ 4.971343] cpufreq: cpufreq_online: CPU4: Running at unlisted freq: 12000 KHz
  392. [ 4.973176] cpufreq: cpufreq_online: CPU4: Unlisted initial frequency changed to: 408000 KHz
  393. [ 4.975658] sdhci: Secure Digital Host Controller Interface driver
  394. [ 4.976215] sdhci: Copyright(c) Pierre Ossman
  395. [ 4.976879] Synopsys Designware Multimedia Card Interface Driver
  396. [ 4.978661] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
  397. [ 4.979617] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
  398. [ 4.980223] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
  399. [ 4.980783] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 28,32 bit host data width,256 deep fifo
  400. [ 4.981897] dwmmc_rockchip fe320000.dwmmc: Linked as a consumer to regulator.17
  401. [ 4.982597] dwmmc_rockchip fe320000.dwmmc: Got CD GPIO
  402. [ 4.983187] vcc_sdio: unsupportable voltage range: 3300000-3000000uV
  403. [ 4.996671] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
  404. [ 5.012141] sdhci-pltfm: SDHCI platform and OF driver helper
  405. [ 5.014983] mmc1: CQHCI version 5.10
  406. [ 5.039629] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
  407. [ 5.045898] ledtrig-cpu: registered to indicate activity on CPUs
  408. [ 5.047991] usbcore: registered new interface driver usbhid
  409. [ 5.048499] usbhid: USB HID core driver
  410. [ 5.050735] rockchip-saradc ff100000.saradc: Linked as a consumer to regulator.2
  411. [ 5.059290] xt_time: kernel timezone is -0000
  412. [ 5.059755] IPVS: Registered protocols (TCP, UDP, SCTP, AH, ESP)
  413. [ 5.060498] IPVS: Connection hash table configured (size=4096, memory=64Kbytes)
  414. [ 5.061315] IPVS: ipvs loaded.
  415. [ 5.061613] IPVS: [rr] scheduler registered.
  416. [ 5.062001] IPVS: [wrr] scheduler registered.
  417. [ 5.062422] IPVS: [lc] scheduler registered.
  418. [ 5.062800] IPVS: [wlc] scheduler registered.
  419. [ 5.063186] IPVS: [fo] scheduler registered.
  420. [ 5.063604] mmc_host mmc0: Bus speed (slot 0) = 148500000Hz (slot req 150000000Hz, actual 148500000HZ div = 0)
  421. [ 5.064522] IPVS: [ovf] scheduler registered.
  422. [ 5.064934] IPVS: [lblc] scheduler registered.
  423. [ 5.065362] IPVS: [lblcr] scheduler registered.
  424. [ 5.065818] IPVS: [dh] scheduler registered.
  425. [ 5.066216] IPVS: [sh] scheduler registered.
  426. [ 5.066612] IPVS: [sed] scheduler registered.
  427. [ 5.067015] IPVS: [nq] scheduler registered.
  428. [ 5.067714] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully
  429. [ 5.068347] Initializing XFRM netlink socket
  430. [ 5.069376] NET: Registered protocol family 10
  431. [ 5.070534] Segment Routing with IPv6
  432. [ 5.071169] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
  433. [ 5.072158] NET: Registered protocol family 17
  434. [ 5.072609] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
  435. [ 5.073873] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
  436. [ 5.074421] Bluetooth: HIDP socket layer initialized
  437. [ 5.074912] 8021q: 802.1Q VLAN Support v1.8
  438. [ 5.075438] 9pnet: Installing 9P2000 support
  439. [ 5.075879] Key type dns_resolver registered
  440. [ 5.077196] registered taskstats version 1
  441. [ 5.078528] Btrfs loaded, crc32c=crc32c-generic
  442. [ 5.100653] input: gpio-keys as /devices/platform/gpio-keys/input/input0
  443. [ 5.103762] rk808-rtc rk808-rtc: setting system clock to 2019-01-12 18:33:44 UTC (1547318024)
  444. [ 5.104529] of_cfs_init
  445. [ 5.104777] of_cfs_init: OK
  446. [ 5.105248] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  447. [ 5.106023] cfg80211: failed to load regulatory.db
  448. [ 5.107043] vcc3v3_pcie: disabling
  449. [ 5.107390] ALSA device list:
  450. [ 5.107657] No soundcards found.
  451. [ 5.108302] ttyS2 - failed to request DMA
  452. [ 5.109135] Freeing unused kernel memory: 1536K
  453. [ 5.157942] Run /init as init process
  454. [ 5.185423] usb 7-1: new high-speed USB device number 2 using xhci-hcd
  455. [ 5.225360] usb 4-1: new low-speed USB device number 2 using ohci-platform
  456. [ 5.369586] dwmmc_rockchip fe320000.dwmmc: Successfully tuned phase to 222
  457. [ 5.370229] mmc0: new ultra high speed SDR104 SDHC card at address 59b4
  458. [ 5.371537] mmcblk0: mmc0:59b4 SD 7.23 GiB
  459. [ 5.379495] mmcblk0: p1 p2 p3 p4 p5 p6 p7
  460. [ 5.397028] hub 7-1:1.0: USB hub found
  461. [ 5.397782] hub 7-1:1.0: 4 ports detected
  462. [ 5.467312] input: Cooler Master Technology Inc. MasterKeys Lite L Combo Keyboard(KB) as /devices/platform/fe3e0000.usb/usb4/4-1/4-1:1.0/0003:2516:0042.0001/input/input1
  463. [ 5.489743] iommu: Adding device ff8f0000.vop to group 0
  464. [ 5.490480] rockchip-vop ff8f0000.vop: Linked as a consumer to ff8f3f00.iommu
  465. [ 5.493104] iommu: Adding device ff900000.vop to group 1
  466. [ 5.493962] rockchip-vop ff900000.vop: Linked as a consumer to ff903f00.iommu
  467. [ 5.500476] rockchip-drm display-subsystem: Linked as a consumer to ff8f0000.vop
  468. [ 5.501166] rockchip-drm display-subsystem: Linked as a consumer to ff900000.vop
  469. [ 5.502365] rockchip-drm display-subsystem: Linked as a consumer to ff940000.hdmi
  470. [ 5.502516] usb 8-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
  471. [ 5.506025] rockchip-drm display-subsystem: bound ff8f0000.vop (ops vop_component_ops [rockchipdrm])
  472. [ 5.508960] rockchip-drm display-subsystem: bound ff900000.vop (ops vop_component_ops [rockchipdrm])
  473. [ 5.510077] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
  474. [ 5.514305] rockchip-drm display-subsystem: bound ff940000.hdmi (ops dw_hdmi_rockchip_ops [rockchipdrm])
  475. [ 5.515162] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  476. [ 5.515747] [drm] No driver support for vblank timestamp query.
  477. [ 5.525811] hid-generic 0003:2516:0042.0001: input: USB HID v1.10 Keyboard [Cooler Master Technology Inc. MasterKeys Lite L Combo Keyboard(KB)] on usb-fe3e0000.usb-1/input0
  478. [ 5.537562] input: Cooler Master Technology Inc. MasterKeys Lite L Combo Keyboard(KB) Consumer Control as /devices/platform/fe3e0000.usb/usb4/4-1/4-1:1.1/0003:2516:0042.0002/input/input2
  479. [ 5.584891] Console: switching to colour frame buffer device 240x67
  480. [ 5.598692] input: Cooler Master Technology Inc. MasterKeys Lite L Combo Keyboard(KB) System Control as /devices/platform/fe3e0000.usb/usb4/4-1/4-1:1.1/0003:2516:0042.0002/input/input3
  481. [ 5.599144] input: Cooler Master Technology Inc. MasterKeys Lite L Combo Keyboard(KB) Keyboard as /devices/platform/fe3e0000.usb/usb4/4-1/4-1:1.1/0003:2516:0042.0002/input/input5
  482. [ 5.599335] hid-generic 0003:2516:0042.0002: input: USB HID v1.10 Keyboard [Cooler Master Technology Inc. MasterKeys Lite L Combo Keyboard(KB)] on usb-fe3e0000.usb-1/input1
  483. [ 5.631083] rockchip-drm display-subsystem: fb0: frame buffer device
  484. [ 5.637000] hub 8-1:1.0: USB hub found
  485. [ 5.637702] hub 8-1:1.0: 4 ports detected
  486. [ 5.653863] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0
  487. [ 5.713504] usb 7-1.1: new high-speed USB device number 3 using xhci-hcd
  488. [ 5.877054] hub 7-1.1:1.0: USB hub found
  489. [ 5.877781] hub 7-1.1:1.0: 4 ports detected
  490. [ 5.900691] EXT4-fs (mmcblk0p7): mounted filesystem with writeback data mode. Opts: (null)
  491. [ 6.070729] usb 8-1.1: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
  492. [ 6.197476] hub 8-1.1:1.0: USB hub found
  493. [ 6.198424] hub 8-1.1:1.0: 4 ports detected
  494. [ 6.265403] usb 7-1.1.1: new full-speed USB device number 4 using xhci-hcd
  495. [ 6.289414] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  496. [ 6.292842] systemd[1]: Detected architecture arm64.
  497. [ 6.314866] systemd[1]: Set hostname to <rockpro64>.
  498. [ 6.552634] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  499. [ 6.554615] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  500. [ 6.771810] random: systemd: uninitialized urandom read (16 bytes read)
  501. [ 6.773571] systemd[1]: Created slice User and Session Slice.
  502. [ 6.785743] random: systemd: uninitialized urandom read (16 bytes read)
  503. [ 6.787221] systemd[1]: Created slice System Slice.
  504. [ 6.797918] random: systemd: uninitialized urandom read (16 bytes read)
  505. [ 6.799321] systemd[1]: Listening on udev Control Socket.
  506. [ 6.810462] systemd[1]: Listening on Journal Socket.
  507. [ 6.825722] systemd[1]: Starting Remount Root and Kernel File Systems...
  508. [ 7.454952] systemd-journald[2389]: Received request to flush runtime journal from PID 1
  509. [ 7.906779] random: crng init done
  510. [ 7.906786] random: 7 urandom warning(s) missed due to ratelimiting
  511. [ 8.778030] rockchip-pcie f8000000.pcie: no vpcie12v regulator found
  512. [ 8.778139] rockchip-pcie f8000000.pcie: Linked as a consumer to regulator.3
  513. [ 8.778168] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
  514. [ 8.778191] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
  515. [ 8.778862] rockchip-pinctrl pinctrl: pin gpio4-0 already requested by ff880000.i2s; cannot claim for 1-0010
  516. [ 8.780189] rockchip-pinctrl pinctrl: pin-128 (1-0010) status -22
  517. [ 8.781047] rockchip-pinctrl pinctrl: could not request pin 128 (gpio4-0) from group i2s-8ch-mclk on device rockchip-pinctrl
  518. [ 8.782543] es8316 1-0010: Error applying setting, reverse things back
  519. [ 8.783458] es8316: probe of 1-0010 failed with error -22
  520. [ 8.869726] rockchip-pcie f8000000.pcie: host bridge /pcie@f8000000 ranges:
  521. [ 8.869758] rockchip-pcie f8000000.pcie: MEM 0xfa000000..0xfbdfffff -> 0xfa000000
  522. [ 8.869772] rockchip-pcie f8000000.pcie: IO 0xfbe00000..0xfbefffff -> 0xfbe00000
  523. [ 8.870109] rockchip-pcie f8000000.pcie: PCI host bridge to bus 0000:00
  524. [ 8.870121] pci_bus 0000:00: root bus resource [bus 00-1f]
  525. [ 8.870128] pci_bus 0000:00: root bus resource [mem 0xfa000000-0xfbdfffff]
  526. [ 8.870138] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xfbe00000-0xfbefffff])
  527. [ 8.870176] pci 0000:00:00.0: [1d87:0100] type 01 class 0x060400
  528. [ 8.870277] pci 0000:00:00.0: supports D1
  529. [ 8.870284] pci 0000:00:00.0: PME# supported from D0 D1 D3hot
  530. [ 8.874352] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  531. [ 8.874562] pci 0000:01:00.0: [1b21:0612] type 00 class 0x010601
  532. [ 8.874645] pci 0000:01:00.0: reg 0x10: initial BAR value 0x00000000 invalid
  533. [ 8.874652] pci 0000:01:00.0: reg 0x10: [io size 0x0008]
  534. [ 8.874681] pci 0000:01:00.0: reg 0x14: initial BAR value 0x00000000 invalid
  535. [ 8.874685] pci 0000:01:00.0: reg 0x14: [io size 0x0004]
  536. [ 8.874713] pci 0000:01:00.0: reg 0x18: initial BAR value 0x00000000 invalid
  537. [ 8.874718] pci 0000:01:00.0: reg 0x18: [io size 0x0008]
  538. [ 8.874746] pci 0000:01:00.0: reg 0x1c: initial BAR value 0x00000000 invalid
  539. [ 8.874751] pci 0000:01:00.0: reg 0x1c: [io size 0x0004]
  540. [ 8.874780] pci 0000:01:00.0: reg 0x20: initial BAR value 0x00000000 invalid
  541. [ 8.874785] pci 0000:01:00.0: reg 0x20: [io size 0x0020]
  542. [ 8.874813] pci 0000:01:00.0: reg 0x24: [mem 0x00000000-0x000001ff]
  543. [ 8.874842] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
  544. [ 8.874874] pci 0000:01:00.0: Max Payload Size set to 256 (was 128, max 512)
  545. [ 8.878778] pci_bus 0000:01: busn_res: [bus 01-1f] end is updated to 01
  546. [ 8.878819] pci 0000:00:00.0: BAR 14: assigned [mem 0xfa000000-0xfa0fffff]
  547. [ 8.878830] pci 0000:01:00.0: BAR 6: assigned [mem 0xfa000000-0xfa00ffff pref]
  548. [ 8.878838] pci 0000:01:00.0: BAR 5: assigned [mem 0xfa010000-0xfa0101ff]
  549. [ 8.878854] pci 0000:01:00.0: BAR 4: no space for [io size 0x0020]
  550. [ 8.878859] pci 0000:01:00.0: BAR 4: failed to assign [io size 0x0020]
  551. [ 8.878865] pci 0000:01:00.0: BAR 0: no space for [io size 0x0008]
  552. [ 8.878870] pci 0000:01:00.0: BAR 0: failed to assign [io size 0x0008]
  553. [ 8.878876] pci 0000:01:00.0: BAR 2: no space for [io size 0x0008]
  554. [ 8.878881] pci 0000:01:00.0: BAR 2: failed to assign [io size 0x0008]
  555. [ 8.878886] pci 0000:01:00.0: BAR 1: no space for [io size 0x0004]
  556. [ 8.878891] pci 0000:01:00.0: BAR 1: failed to assign [io size 0x0004]
  557. [ 8.878896] pci 0000:01:00.0: BAR 3: no space for [io size 0x0004]
  558. [ 8.878902] pci 0000:01:00.0: BAR 3: failed to assign [io size 0x0004]
  559. [ 8.878908] pci 0000:00:00.0: PCI bridge to [bus 01]
  560. [ 8.878917] pci 0000:00:00.0: bridge window [mem 0xfa000000-0xfa0fffff]
  561. [ 8.879222] ahci 0000:01:00.0: version 3.0
  562. [ 8.879242] pci 0000:00:00.0: enabling device (0000 -> 0002)
  563. [ 8.879259] ahci 0000:01:00.0: enabling device (0000 -> 0002)
  564. [ 8.879548] ahci 0000:01:00.0: SSS flag set, parallel bus scan disabled
  565. [ 8.879605] ahci 0000:01:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
  566. [ 8.879615] ahci 0000:01:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
  567. [ 8.882189] scsi host0: ahci
  568. [ 8.882834] scsi host1: ahci
  569. [ 8.882991] ata1: SATA max UDMA/133 abar m512@0xfa010000 port 0xfa010100 irq 231
  570. [ 8.882996] ata2: SATA max UDMA/133 abar m512@0xfa010000 port 0xfa010180 irq 231
  571. [ 9.357401] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  572. [ 9.357735] ata1.00: supports DRM functions and may not be fully accessible
  573. [ 9.358583] ata1.00: ATA-11: Samsung SSD 860 EVO 500GB, RVT02B6Q, max UDMA/133
  574. [ 9.358587] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
  575. [ 9.360996] ata1.00: supports DRM functions and may not be fully accessible
  576. [ 9.363831] ata1.00: configured for UDMA/133
  577. [ 9.364304] scsi 0:0:0:0: Direct-Access ATA Samsung SSD 860 2B6Q PQ: 0 ANSI: 5
  578. [ 9.364757] ata1.00: Enabling discard_zeroes_data
  579. [ 9.364927] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466 GiB)
  580. [ 9.364962] sd 0:0:0:0: [sda] Write Protect is off
  581. [ 9.364967] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  582. [ 9.365024] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  583. [ 9.365452] ata1.00: Enabling discard_zeroes_data
  584. [ 9.366213] sda: sda1
  585. [ 9.368233] ata1.00: Enabling discard_zeroes_data
  586. [ 9.368923] sd 0:0:0:0: [sda] Attached SCSI disk
  587. [ 9.679932] ata2: SATA link down (SStatus 0 SControl 300)
  588. [ 9.721300] RTL8211F Gigabit Ethernet stmmac-0:00: attached PHY driver [RTL8211F Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
  589. [ 9.723282] rk_gmac-dwmac fe300000.ethernet eth0: No Safety Features support found
  590. [ 9.723297] rk_gmac-dwmac fe300000.ethernet eth0: PTP not supported by HW
  591. [ 9.723641] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  592. [ 9.839491] FAT-fs (mmcblk0p6): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
  593. [ 10.750098] rk_gmac-dwmac fe300000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  594. [ 10.750130] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  595. [ 11.429420] phy phy-ff770000.syscon:usb2-phy@e450.2: charger = USB_DCP_CHARGER
  596. [ 64.446828] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  597. [ 261.141994] ata1.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x6 frozen
  598. [ 261.142766] ata1.00: failed command: SEND FPDMA QUEUED
  599. [ 261.143307] ata1.00: cmd 64/01:00:00:00:00/00:00:00:00:00/a0 tag 0 ncq dma 512 out
  600. res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
  601. [ 261.144836] ata1.00: status: { DRDY }
  602. [ 261.145225] ata1: hard resetting link
  603. [ 261.621734] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  604. [ 261.622069] ata1.00: supports DRM functions and may not be fully accessible
  605. [ 261.625381] ata1.00: supports DRM functions and may not be fully accessible
  606. [ 261.629253] ata1.00: configured for UDMA/133
  607. [ 261.629268] ata1.00: device reported invalid CHS sector 0
  608. [ 261.629298] ata1: EH complete
  609. [ 261.629504] ata1.00: Enabling discard_zeroes_data
  610. [ 291.851547] ata1.00: exception Emask 0x0 SAct 0x20 SErr 0x0 action 0x6 frozen
  611. [ 291.852321] ata1.00: failed command: SEND FPDMA QUEUED
  612. [ 291.852862] ata1.00: cmd 64/01:28:00:00:00/00:00:00:00:00/a0 tag 5 ncq dma 512 out
  613. res 40/00:00:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
  614. [ 291.854392] ata1.00: status: { DRDY }
  615. [ 291.854781] ata1: hard resetting link
  616. [ 292.331711] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  617. [ 292.332309] ata1.00: supports DRM functions and may not be fully accessible
  618. [ 292.335711] ata1.00: supports DRM functions and may not be fully accessible
  619. [ 292.339350] ata1.00: configured for UDMA/133
  620. [ 292.339388] ata1: EH complete
  621. [ 292.339693] ata1.00: Enabling discard_zeroes_data
  622. [ 322.570422] ata1.00: exception Emask 0x0 SAct 0x8000 SErr 0x0 action 0x6 frozen
  623. [ 322.571215] ata1.00: failed command: SEND FPDMA QUEUED
  624. [ 322.571756] ata1.00: cmd 64/01:78:00:00:00/00:00:00:00:00/a0 tag 15 ncq dma 512 out
  625. res 40/00:ff:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
  626. [ 322.573294] ata1.00: status: { DRDY }
  627. [ 322.573683] ata1: hard resetting link
  628. [ 323.050549] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  629. [ 323.051230] ata1.00: supports DRM functions and may not be fully accessible
  630. [ 323.055421] ata1.00: supports DRM functions and may not be fully accessible
  631. [ 323.058372] ata1.00: configured for UDMA/133
  632. [ 323.058401] ata1: EH complete
  633. [ 323.058585] ata1.00: Enabling discard_zeroes_data
  634. [ 353.289905] ata1.00: NCQ disabled due to excessive errors
  635. [ 353.289915] ata1.00: exception Emask 0x0 SAct 0x80 SErr 0x0 action 0x6 frozen
  636. [ 353.290689] ata1.00: failed command: SEND FPDMA QUEUED
  637. [ 353.291229] ata1.00: cmd 64/01:38:00:00:00/00:00:00:00:00/a0 tag 7 ncq dma 512 out
  638. res 40/00:01:00:4f:c2/00:00:00:00:00/00 Emask 0x4 (timeout)
  639. [ 353.292760] ata1.00: status: { DRDY }
  640. [ 353.293149] ata1: hard resetting link
  641. [ 353.769909] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
  642. [ 353.770245] ata1.00: supports DRM functions and may not be fully accessible
  643. [ 353.773525] ata1.00: supports DRM functions and may not be fully accessible
  644. [ 353.776711] ata1.00: configured for UDMA/133
  645. [ 353.776747] ata1: EH complete
  646. [ 353.776938] ata1.00: Enabling discard_zeroes_data
RAW Paste Data