Guest User

dmesg from Pine64 armbian

a guest
Apr 8th, 2020
378
Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. <6>[    0.000000] log_buf_len individual max cpu contribution: 4096 bytes
  2. <6>[    0.000000] log_buf_len total cpu_extra contributions: 12288 bytes
  3. <6>[    0.000000] log_buf_len min size: 16384 bytes
  4. <6>[    0.000000] log_buf_len: 32768 bytes
  5. <6>[    0.000000] early log buf free: 13700(83%)
  6. <6>[    0.000000] Memory: 1970756K/2097152K available (10174K kernel code, 728K rwdata, 2480K rodata, 576K init, 286K bss, 60860K reserved, 65536K cma-reserved)
  7. <6>[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
  8. <6>[    0.000000] rcu: Hierarchical RCU implementation.
  9. <6>[    0.000000] rcu:  RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4.
  10. <6>[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
  11. <6>[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
  12. <6>[    0.000000] GIC: Using split EOI/Deactivate mode
  13. <6>[    0.000000] arch_timer: Enabling global workaround for Allwinner erratum UNKNOWN1
  14. <6>[    0.000000] arch_timer: CPU0: Trapping CNTVCT access
  15. <6>[    0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
  16. <6>[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
  17. <6>[    0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
  18. <6>[    0.000271] Console: colour dummy device 80x25
  19. <6>[    0.000282] console [tty1] enabled
  20. <6>[    0.000351] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000)
  21. <6>[    0.000360] pid_max: default: 32768 minimum: 301
  22. <6>[    0.000446] Security Framework initialized
  23. <6>[    0.000455] AppArmor: AppArmor disabled by boot time parameter
  24. <6>[    0.001725] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
  25. <6>[    0.002357] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
  26. <6>[    0.002404] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
  27. <6>[    0.002429] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
  28. <6>[    0.003787] ASID allocator initialised with 32768 entries
  29. <6>[    0.003867] rcu: Hierarchical SRCU implementation.
  30. <6>[    0.004610] smp: Bringing up secondary CPUs ...
  31. <6>[    0.005812] Detected VIPT I-cache on CPU1
  32. <6>[    0.005863] arch_timer: CPU1: Trapping CNTVCT access
  33. <6>[    0.005872] CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
  34. <6>[    0.006761] Detected VIPT I-cache on CPU2
  35. <6>[    0.006787] arch_timer: CPU2: Trapping CNTVCT access
  36. <6>[    0.006794] CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
  37. <6>[    0.007612] Detected VIPT I-cache on CPU3
  38. <6>[    0.007636] arch_timer: CPU3: Trapping CNTVCT access
  39. <6>[    0.007643] CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
  40. <6>[    0.007711] smp: Brought up 1 node, 4 CPUs
  41. <6>[    0.007715] SMP: Total of 4 processors activated.
  42. <6>[    0.007721] CPU features: detected: 32-bit EL0 Support
  43. <6>[    0.010447] CPU: All CPU(s) started at EL2
  44. <6>[    0.010462] alternatives: patching kernel code
  45. <6>[    0.011798] devtmpfs: initialized
  46. <6>[    0.017980] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
  47. <6>[    0.018014] futex hash table entries: 1024 (order: 4, 65536 bytes)
  48. <6>[    0.020246] xor: measuring software checksum speed
  49. <6>[    0.058383]    8regs     :  1566.000 MB/sec
  50. <6>[    0.098424]    8regs_prefetch:  1396.000 MB/sec
  51. <6>[    0.138478]    32regs    :  1925.000 MB/sec
  52. <6>[    0.178519]    32regs_prefetch:  1618.000 MB/sec
  53. <6>[    0.178523] xor: using function: 32regs (1925.000 MB/sec)
  54. <6>[    0.178583] pinctrl core: initialized pinctrl subsystem
  55. <6>[    0.179413] NET: Registered protocol family 16
  56. <6>[    0.179931] audit: initializing netlink subsys (disabled)
  57. <5>[    0.180097] audit: type=2000 audit(0.176:1): state=initialized audit_enabled=0 res=1
  58. <6>[    0.180601] cpuidle: using governor menu
  59. <6>[    0.180890] vdso: 2 pages (1 code @ (____ptrval____), 1 data @ (____ptrval____))
  60. <6>[    0.180897] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
  61. <6>[    0.183004] DMA: preallocated 2048 KiB pool for atomic allocations
  62. <6>[    0.183091] Serial: AMBA PL011 UART driver
  63. <6>[    0.195171] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
  64. <6>[    0.195617] cryptd: max_cpu_qlen set to 1000
  65. <6>[    0.262831] raid6: int64x1  gen()   299 MB/s
  66. <6>[    0.330759] raid6: int64x1  xor()   295 MB/s
  67. <6>[    0.398929] raid6: int64x2  gen()   460 MB/s
  68. <6>[    0.466895] raid6: int64x2  xor()   409 MB/s
  69. <6>[    0.535021] raid6: int64x4  gen()   707 MB/s
  70. <6>[    0.603056] raid6: int64x4  xor()   503 MB/s
  71. <6>[    0.671144] raid6: int64x8  gen()   667 MB/s
  72. <6>[    0.739241] raid6: int64x8  xor()   510 MB/s
  73. <6>[    0.807269] raid6: neonx1   gen()   494 MB/s
  74. <6>[    0.875376] raid6: neonx1   xor()   579 MB/s
  75. <6>[    0.943461] raid6: neonx2   gen()   791 MB/s
  76. <6>[    1.011536] raid6: neonx2   xor()   821 MB/s
  77. <6>[    1.079610] raid6: neonx4   gen()  1026 MB/s
  78. <6>[    1.147709] raid6: neonx4   xor()   983 MB/s
  79. <6>[    1.215777] raid6: neonx8   gen()  1124 MB/s
  80. <6>[    1.283873] raid6: neonx8   xor()  1044 MB/s
  81. <6>[    1.283876] raid6: using algorithm neonx8 gen() 1124 MB/s
  82. <6>[    1.283879] raid6: .... xor() 1044 MB/s, rmw enabled
  83. <6>[    1.283883] raid6: using neon recovery algorithm
  84. <5>[    1.284487] SCSI subsystem initialized
  85. <6>[    1.284665] usbcore: registered new interface driver usbfs
  86. <6>[    1.284705] usbcore: registered new interface driver hub
  87. <6>[    1.284766] usbcore: registered new device driver usb
  88. <6>[    1.285003] pps_core: LinuxPPS API ver. 1 registered
  89. <6>[    1.285007] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
  90. <6>[    1.285021] PTP clock support registered
  91. <6>[    1.286294] clocksource: Switched to clocksource arch_sys_counter
  92. <5>[    1.286463] VFS: Disk quotas dquot_6.6.0
  93. <6>[    1.286522] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
  94. <6>[    1.292868] NET: Registered protocol family 2
  95. <6>[    1.293460] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes)
  96. <6>[    1.293516] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
  97. <6>[    1.293719] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
  98. <6>[    1.294033] TCP: Hash tables configured (established 16384 bind 16384)
  99. <6>[    1.294183] UDP hash table entries: 1024 (order: 3, 32768 bytes)
  100. <6>[    1.294249] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
  101. <6>[    1.294493] NET: Registered protocol family 1
  102. <6>[    1.294915] RPC: Registered named UNIX socket transport module.
  103. <6>[    1.294918] RPC: Registered udp transport module.
  104. <6>[    1.294921] RPC: Registered tcp transport module.
  105. <6>[    1.294924] RPC: Registered tcp NFSv4.1 backchannel transport module.
  106. <6>[    1.295152] Unpacking initramfs...
  107. <6>[    2.004213] Freeing initrd memory: 12484K
  108. <5>[    2.009493] Initialise system trusted keyrings
  109. <6>[    2.009607] workingset: timestamp_bits=44 max_order=19 bucket_order=0
  110. <6>[    2.014811] zbud: loaded
  111. <6>[    2.016364] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  112. <5>[    2.017090] NFS: Registering the id_resolver key type
  113. <5>[    2.017114] Key type id_resolver registered
  114. <5>[    2.017117] Key type id_legacy registered
  115. <6>[    2.017128] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
  116. <6>[    2.017132] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
  117. <6>[    2.018104] 9p: Installing v9fs 9p2000 file system support
  118. <6>[    2.023849] NET: Registered protocol family 38
  119. <5>[    2.023964] Key type asymmetric registered
  120. <5>[    2.023968] Asymmetric key parser 'x509' registered
  121. <6>[    2.024017] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
  122. <6>[    2.024124] io scheduler noop registered
  123. <6>[    2.024127] io scheduler deadline registered
  124. <6>[    2.024300] io scheduler cfq registered (default)
  125. <6>[    2.024305] io scheduler mq-deadline registered
  126. <6>[    2.024308] io scheduler kyber registered
  127. <6>[    2.024433] io scheduler bfq registered
  128. <3>[    2.024716] sun50i-de2-bus 1000000.de2: Error couldn't map SRAM to device
  129. <3>[    2.025386] sun4i-usb-phy 1c19400.phy: failed to get clock usb0_phy
  130. <6>[    2.028550] sun50i-a64-r-pinctrl 1f02c00.pinctrl: initialized sunXi PIO driver
  131. <6>[    2.037425] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
  132. <6>[    2.046731] loop: module loaded
  133. <6>[    2.047931] libphy: Fixed MDIO Bus: probed
  134. <6>[    2.048804] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  135. <6>[    2.048808] ehci-platform: EHCI generic platform driver
  136. <6>[    2.048988] ehci-platform 1c1a000.usb: EHCI Host Controller
  137. <6>[    2.049010] ehci-platform 1c1a000.usb: new USB bus registered, assigned bus number 1
  138. <6>[    2.050312] ehci-platform 1c1a000.usb: irq 13, io mem 0x01c1a000
  139. <6>[    2.070309] ehci-platform 1c1a000.usb: USB 2.0 started, EHCI 1.00
  140. <6>[    2.070543] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  141. <6>[    2.070550] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  142. <6>[    2.070556] usb usb1: Product: EHCI Host Controller
  143. <6>[    2.070561] usb usb1: Manufacturer: Linux 4.19.63-sunxi64 ehci_hcd
  144. <6>[    2.070566] usb usb1: SerialNumber: 1c1a000.usb
  145. <6>[    2.071054] hub 1-0:1.0: USB hub found
  146. <6>[    2.071095] hub 1-0:1.0: 1 port detected
  147. <6>[    2.071692] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  148. <6>[    2.071711] ohci-platform: OHCI generic platform driver
  149. <6>[    2.071866] ohci-platform 1c1a400.usb: Generic Platform OHCI controller
  150. <6>[    2.071885] ohci-platform 1c1a400.usb: new USB bus registered, assigned bus number 2
  151. <6>[    2.072173] ohci-platform 1c1a400.usb: irq 14, io mem 0x01c1a400
  152. <6>[    2.134501] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
  153. <6>[    2.134508] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  154. <6>[    2.134513] usb usb2: Product: Generic Platform OHCI controller
  155. <6>[    2.134519] usb usb2: Manufacturer: Linux 4.19.63-sunxi64 ohci_hcd
  156. <6>[    2.134524] usb usb2: SerialNumber: 1c1a400.usb
  157. <6>[    2.134958] hub 2-0:1.0: USB hub found
  158. <6>[    2.134996] hub 2-0:1.0: 1 port detected
  159. <6>[    2.135861] usbcore: registered new interface driver usb-storage
  160. <6>[    2.136352] mousedev: PS/2 mouse device common for all mice
  161. <6>[    2.136764] sun6i-rtc 1f00000.rtc: rtc core: registered rtc-sun6i as rtc0
  162. <6>[    2.136770] sun6i-rtc 1f00000.rtc: RTC enabled
  163. <6>[    2.136846] i2c /dev entries driver
  164. <6>[    2.137406] sunxi-wdt 1c20ca0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0)
  165. <6>[    2.137946] sdhci: Secure Digital Host Controller Interface driver
  166. <6>[    2.137949] sdhci: Copyright(c) Pierre Ossman
  167. <6>[    2.137972] Synopsys Designware Multimedia Card Interface Driver
  168. <6>[    2.138366] sdhci-pltfm: SDHCI platform and OF driver helper
  169. <6>[    2.138815] ledtrig-cpu: registered to indicate activity on CPUs
  170. <6>[    2.139117] hidraw: raw HID events driver (C) Jiri Kosina
  171. <6>[    2.139214] usbcore: registered new interface driver usbhid
  172. <6>[    2.139216] usbhid: USB HID core driver
  173. <6>[    2.140279] NET: Registered protocol family 10
  174. <6>[    2.178307] Segment Routing with IPv6
  175. <6>[    2.178394] NET: Registered protocol family 17
  176. <6>[    2.178547] 8021q: 802.1Q VLAN Support v1.8
  177. <6>[    2.178902] 9pnet: Installing 9P2000 support
  178. <5>[    2.178958] Key type dns_resolver registered
  179. <6>[    2.179668] registered taskstats version 1
  180. <5>[    2.179672] Loading compiled-in X.509 certificates
  181. <6>[    2.179750] zswap: loaded using pool lzo/zbud
  182. <6>[    2.181067] Btrfs loaded, crc32c=crc32c-arm64-ce
  183. <5>[    2.198012] Key type encrypted registered
  184. <6>[    2.214736] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff000008b184e0)
  185. <6>[    2.223060] sun4i-drm display-engine: bound 1200000.mixer (ops 0xffff000008b184e0)
  186. <6>[    2.223391] sun4i-drm display-engine: No panel or bridge found... RGB output disabled
  187. <6>[    2.223402] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xffff000008b156e0)
  188. <6>[    2.223586] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops 0xffff000008b156e0)
  189. <3>[    2.223636] sun8i-dw-hdmi 1ee0000.hdmi: Couldn't get regulator
  190. <3>[    2.223651] sun4i-drm display-engine: failed to bind 1ee0000.hdmi (ops 0xffff000008b17e68): -517
  191. <3>[    2.223893] sun4i-drm display-engine: Couldn't bind all pipelines components
  192. <6>[    2.223995] sun4i-drm display-engine: master bind failed: -517
  193. <6>[    2.224339] sunxi-rsb 1f03400.rsb: RSB running at 3000000 Hz
  194. <6>[    2.224693] axp20x-rsb sunxi-rsb-3a3: AXP20x variant AXP803 found
  195. <6>[    2.227420] input: axp20x-pek as /devices/platform/soc/1f03400.rsb/sunxi-rsb-3a3/axp221-pek/input/input0
  196. <6>[    2.227829] dcdc1: supplied by regulator-dummy
  197. <6>[    2.228083] dcdc2: supplied by regulator-dummy
  198. <6>[    2.228310] dcdc4: supplied by regulator-dummy
  199. <6>[    2.228507] dcdc5: supplied by regulator-dummy
  200. <6>[    2.228700] dcdc6: supplied by regulator-dummy
  201. <6>[    2.228911] dc1sw: supplied by regulator-dummy
  202. <6>[    2.229080] aldo1: supplied by regulator-dummy
  203. <6>[    2.229290] aldo2: supplied by regulator-dummy
  204. <6>[    2.229514] aldo3: supplied by regulator-dummy
  205. <6>[    2.229719] dldo1: supplied by regulator-dummy
  206. <6>[    2.229916] dldo2: supplied by regulator-dummy
  207. <6>[    2.230126] dldo3: supplied by regulator-dummy
  208. <6>[    2.230360] dldo4: supplied by regulator-dummy
  209. <6>[    2.230565] eldo1: supplied by regulator-dummy
  210. <6>[    2.230782] eldo2: supplied by regulator-dummy
  211. <6>[    2.230984] eldo3: supplied by regulator-dummy
  212. <6>[    2.231191] fldo1: supplied by regulator-dummy
  213. <6>[    2.231421] fldo2: supplied by regulator-dummy
  214. <6>[    2.231637] rtc-ldo: supplied by regulator-dummy
  215. <6>[    2.231804] ldo-io0: supplied by regulator-dummy
  216. <6>[    2.232046] ldo-io1: supplied by regulator-dummy
  217. <6>[    2.233120] axp20x-rsb sunxi-rsb-3a3: AXP20X driver loaded
  218. <6>[    2.237357] sun50i-a64-pinctrl 1c20800.pinctrl: initialized sunXi PIO driver
  219. <6>[    2.237858] console [ttyS0] disabled
  220. <6>[    2.258476] 1c28000.serial: ttyS0 at MMIO 0x1c28000 (irq = 23, base_baud = 1500000) is a U6_16550A
  221. <6>[    2.258532] console [ttyS0] enabled
  222. <6>[    2.279740] 1c28400.serial: ttyS1 at MMIO 0x1c28400 (irq = 24, base_baud = 1500000) is a U6_16550A
  223. <4>[    2.281046] dwmac-sun8i 1c30000.ethernet: PTP uses main clock
  224. <6>[    2.281134] dwmac-sun8i 1c30000.ethernet: Linked as a consumer to regulator.6
  225. <4>[    2.281304] dwmac-sun8i 1c30000.ethernet: Current syscon value is not the default 6 (expect 0)
  226. <6>[    2.281319] dwmac-sun8i 1c30000.ethernet: No HW DMA feature register supported
  227. <6>[    2.281324] dwmac-sun8i 1c30000.ethernet: RX Checksum Offload Engine supported
  228. <6>[    2.281329] dwmac-sun8i 1c30000.ethernet: COE Type 2
  229. <6>[    2.281334] dwmac-sun8i 1c30000.ethernet: TX Checksum insertion supported
  230. <6>[    2.281340] dwmac-sun8i 1c30000.ethernet: Normal descriptors
  231. <6>[    2.281345] dwmac-sun8i 1c30000.ethernet: Chain mode enabled
  232. <6>[    2.281449] libphy: stmmac: probed
  233. <6>[    2.292565] ehci-platform 1c1b000.usb: EHCI Host Controller
  234. <6>[    2.292590] ehci-platform 1c1b000.usb: new USB bus registered, assigned bus number 3
  235. <6>[    2.293332] ehci-platform 1c1b000.usb: irq 15, io mem 0x01c1b000
  236. <6>[    2.306302] ehci-platform 1c1b000.usb: USB 2.0 started, EHCI 1.00
  237. <6>[    2.306504] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  238. <6>[    2.306511] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  239. <6>[    2.306516] usb usb3: Product: EHCI Host Controller
  240. <6>[    2.306522] usb usb3: Manufacturer: Linux 4.19.63-sunxi64 ehci_hcd
  241. <6>[    2.306527] usb usb3: SerialNumber: 1c1b000.usb
  242. <6>[    2.306980] hub 3-0:1.0: USB hub found
  243. <6>[    2.307011] hub 3-0:1.0: 1 port detected
  244. <6>[    2.307708] ohci-platform 1c1b400.usb: Generic Platform OHCI controller
  245. <6>[    2.307725] ohci-platform 1c1b400.usb: new USB bus registered, assigned bus number 4
  246. <6>[    2.307992] ohci-platform 1c1b400.usb: irq 16, io mem 0x01c1b400
  247. <6>[    2.370440] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 4.19
  248. <6>[    2.370447] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  249. <6>[    2.370453] usb usb4: Product: Generic Platform OHCI controller
  250. <6>[    2.370458] usb usb4: Manufacturer: Linux 4.19.63-sunxi64 ohci_hcd
  251. <6>[    2.370464] usb usb4: SerialNumber: 1c1b400.usb
  252. <6>[    2.370852] hub 4-0:1.0: USB hub found
  253. <6>[    2.370883] hub 4-0:1.0: 1 port detected
  254. <4>[    2.371606] usb_phy_generic usb_phy_generic.0.auto: usb_phy_generic.0.auto supply vcc not found, using dummy regulator
  255. <6>[    2.371658] usb_phy_generic usb_phy_generic.0.auto: Linked as a consumer to regulator.0
  256. <6>[    2.371934] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
  257. <6>[    2.371942] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 5
  258. <6>[    2.372116] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 4.19
  259. <6>[    2.372123] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
  260. <6>[    2.372129] usb usb5: Product: MUSB HDRC host driver
  261. <6>[    2.372134] usb usb5: Manufacturer: Linux 4.19.63-sunxi64 musb-hcd
  262. <6>[    2.372139] usb usb5: SerialNumber: musb-hdrc.1.auto
  263. <6>[    2.372505] hub 5-0:1.0: USB hub found
  264. <6>[    2.372538] hub 5-0:1.0: 1 port detected
  265. <6>[    2.374438] sunxi-mmc 1c0f000.mmc: Linked as a consumer to regulator.1
  266. <6>[    2.374772] sunxi-mmc 1c10000.mmc: Linked as a consumer to regulator.13
  267. <6>[    2.374830] sunxi-mmc 1c10000.mmc: Linked as a consumer to regulator.14
  268. <6>[    2.382844] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff000008b184e0)
  269. <6>[    2.391168] sun4i-drm display-engine: bound 1200000.mixer (ops 0xffff000008b184e0)
  270. <6>[    2.391541] sun4i-drm display-engine: No panel or bridge found... RGB output disabled
  271. <6>[    2.391553] sun4i-drm display-engine: bound 1c0c000.lcd-controller (ops 0xffff000008b156e0)
  272. <6>[    2.391703] sun4i-drm display-engine: bound 1c0d000.lcd-controller (ops 0xffff000008b156e0)
  273. <6>[    2.391795] sun8i-dw-hdmi 1ee0000.hdmi: Linked as a consumer to regulator.10
  274. <6>[    2.392378] sunxi-mmc 1c0f000.mmc: Got CD GPIO
  275. <6>[    2.392461] sunxi-mmc 1c10000.mmc: allocated mmc-pwrseq
  276. <6>[    2.392627] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
  277. <6>[    2.393104] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare HDMI I2C bus driver
  278. <6>[    2.393395] sun4i-drm display-engine: bound 1ee0000.hdmi (ops 0xffff000008b17e68)
  279. <6>[    2.393401] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
  280. <6>[    2.393404] [drm] No driver support for vblank timestamp query.
  281. <6>[    2.393460] [drm] Cannot find any crtc or sizes
  282. <6>[    2.393827] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0
  283. <6>[    2.394186] sun6i-rtc 1f00000.rtc: setting system clock to 2020-04-08 09:30:10 UTC (1586338210)
  284. <6>[    2.394379] of_cfs_init
  285. <6>[    2.394462] of_cfs_init: OK
  286. <6>[    2.417703] sunxi-mmc 1c0f000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
  287. <6>[    2.417744] sunxi-mmc 1c10000.mmc: initialized, max. request size: 16384 KB, uses new timings mode
  288. <6>[    2.418162] Freeing unused kernel memory: 576K
  289. <6>[    2.422373] Run /init as init process
  290. <6>[    2.454171] mmc0: new high speed SDHC card at address 0001
  291. <6>[    2.455960] mmcblk0: mmc0:0001 00000 29.8 GiB
  292. <6>[    2.457482]  mmcblk0: p1
  293. <6>[    2.642333] usb 3-1: new high-speed USB device number 2 using ehci-platform
  294. <6>[    2.776830] lima 1c40000.gpu: bus rate = 200000000
  295. <6>[    2.776840] lima 1c40000.gpu: mod rate = 384000000
  296. <6>[    2.777119] [TTM] Zone  kernel: Available graphics memory: 1024676 kiB
  297. <6>[    2.777124] [TTM] Initializing pool allocator
  298. <6>[    2.777144] [TTM] Initializing DMA pool allocator
  299. <6>[    2.777849] lima 1c40000.gpu: gp - mali400 version major 1 minor 1
  300. <6>[    2.777895] lima 1c40000.gpu: pp0 - mali400 version major 1 minor 1
  301. <6>[    2.777938] lima 1c40000.gpu: pp1 - mali400 version major 1 minor 1
  302. <6>[    2.777973] lima 1c40000.gpu: l2 cache 64K, 4-way, 64byte cache line, 64bit external bus
  303. <6>[    2.783813] [drm] Initialized lima 1.0.0 20170325 for 1c40000.gpu on minor 1
  304. <4>[    2.789251] axp20x-gpio axp20x-gpio: DMA mask not set
  305. <6>[    2.789799] axp20x-gpio axp20x-gpio: AXP209 pinctrl and GPIO driver loaded
  306. <6>[    2.804299] usb 3-1: New USB device found, idVendor=1e68, idProduct=001b, bcdDevice= 0.00
  307. <6>[    2.804309] usb 3-1: New USB device strings: Mfr=1, Product=11, SerialNumber=3
  308. <6>[    2.804315] usb 3-1: Product: TrekStor  DS maxi g.u
  309. <6>[    2.804321] usb 3-1: Manufacturer: JMicron
  310. <6>[    2.804326] usb 3-1: SerialNumber: 2009A1000294
  311. <6>[    2.806008] usb-storage 3-1:1.0: USB Mass Storage device detected
  312. <6>[    2.811637] usb-storage 3-1:1.0: Quirks match for vid 1e68 pid 001b: 8020
  313. <6>[    2.813838] scsi host0: usb-storage 3-1:1.0
  314. <6>[    2.884509] usbcore: registered new interface driver uas
  315. <5>[    2.978236] random: fast init done
  316. <6>[    3.274040] EXT4-fs (mmcblk0p1): mounted filesystem with writeback data mode. Opts: (null)
  317. <6>[    3.394379] [drm] Cannot find any crtc or sizes
  318. <5>[    3.843318] scsi 0:0:0:0: Direct-Access     TrekStor  DS maxi g.u          PQ: 0 ANSI: 2 CCS
  319. <5>[    3.843913] sd 0:0:0:0: Attached scsi generic sg0 type 0
  320. <5>[    3.844425] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
  321. <5>[    3.845509] sd 0:0:0:0: [sda] Write Protect is off
  322. <7>[    3.845518] sd 0:0:0:0: [sda] Mode Sense: 34 00 00 00
  323. <5>[    3.846632] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
  324. <6>[    3.862813]  sda: sda1
  325. <5>[    3.866273] sd 0:0:0:0: [sda] Attached SCSI disk
  326. <7>[    4.153179] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
  327. <7>[    4.153708] systemd[1]: Detected architecture arm64.
  328. <7>[    4.164283] systemd[1]: Set hostname to <pine64>.
  329. <7>[    4.656490] systemd[1]: File /lib/systemd/system/systemd-journald.service:12 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
  330. <7>[    4.656506] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
  331. <7>[    4.842259] systemd[1]: /lib/systemd/system/winbind.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/winbindd.pid \xe2\x86\x92 /run/samba/winbindd.pid; please update the unit file accordingly.
  332. <7>[    4.898130] systemd[1]: /lib/systemd/system/smbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/smbd.pid \xe2\x86\x92 /run/samba/smbd.pid; please update the unit file accordingly.
  333. <7>[    4.917571] systemd[1]: /lib/systemd/system/nmbd.service:9: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/nmbd.pid \xe2\x86\x92 /run/samba/nmbd.pid; please update the unit file accordingly.
  334. <7>[    4.919209] systemd[1]: /lib/systemd/system/netdata.service:10: PIDFile= references path below legacy directory /var/run/, updating /var/run/netdata/netdata.pid \xe2\x86\x92 /run/netdata/netdata.pid; please update the unit file accordingly.
  335. <7>[    4.960639] systemd[1]: /etc/systemd/system/anydesk.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/anydesk.pid \xe2\x86\x92 /run/anydesk.pid; please update the unit file accordingly.
  336. <5>[    5.047822] random: systemd: uninitialized urandom read (16 bytes read)
  337. <5>[    5.059240] random: systemd: uninitialized urandom read (16 bytes read)
  338. <5>[    5.060208] random: systemd: uninitialized urandom read (16 bytes read)
  339. <6>[    5.182674] EXT4-fs (mmcblk0p1): re-mounted. Opts: commit=600,errors=remount-ro
  340. <7>[    5.558370] systemd-journald[296]: Received request to flush runtime journal from PID 1
  341. <6>[    5.975779] Adding 3145724k swap on /etc/kyra_swap.  Priority:-2 extents:94 across:25780220k SSFS
  342. <6>[    6.101058] cpu cpu0: Linked as a consumer to regulator.2
  343. <6>[    6.101105] cpu cpu0: Dropping the link to regulator.2
  344. <6>[    6.101254] cpu cpu0: Linked as a consumer to regulator.2
  345. <4>[    6.253537] thermal thermal_zone0: failed to read out thermal zone (-110)
  346. <4>[    6.253571] thermal thermal_zone1: failed to read out thermal zone (-110)
  347. <4>[    6.253586] thermal thermal_zone2: failed to read out thermal zone (-110)
  348. <6>[    6.343735] asoc-simple-card sound: sun8i <-> 1c22c00.dai mapping ok
  349. <3>[    6.343788] asoc-simple-card sound: ASoC: no sink widget found for Speaker
  350. <3>[    6.343792] asoc-simple-card sound: ASoC: Failed to add route LINEOUT -> direct -> Speaker
  351. <4>[    6.360882] axp20x-adc axp813-adc: DMA mask not set
  352. <4>[    6.362240] axp20x-ac-power-supply axp20x-ac-power-supply: DMA mask not set
  353. <4>[    6.363003] thermal thermal_zone2: failed to read out thermal zone (-110)
  354. <4>[    6.364000] axp20x-battery-power-supply axp20x-battery-power-supply: DMA mask not set
  355. <6>[    6.366977] asoc-simple-card soc:sound_hdmi: i2s-hifi <-> 1c22800.i2s mapping ok
  356. <4>[    6.373922] thermal thermal_zone2: failed to read out thermal zone (-110)
  357. <6>[    7.421144] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
  358. <6>[    8.017594] zram: Added device: zram0
  359. <6>[    8.020189] zram: Added device: zram1
  360. <6>[    8.021070] zram: Added device: zram2
  361. <6>[    8.056096] zram1: detected capacity change from 0 to 1049268224
  362. <6>[    9.082720] Adding 1024672k swap on /dev/zram1.  Priority:5 extents:1 across:1024672k SSFS
  363. <6>[    9.200913] zram0: detected capacity change from 0 to 52428800
  364. <6>[   11.309620] EXT4-fs (zram0): mounted filesystem without journal. Opts: discard
  365. <5>[   15.109634] random: crng init done
  366. <5>[   15.109649] random: 7 urandom warning(s) missed due to ratelimiting
  367. <6>[   22.057214] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  368. <6>[   22.057795] RTL8211E Gigabit Ethernet stmmac-0:01: attached PHY driver [RTL8211E Gigabit Ethernet] (mii_bus:phy_addr=stmmac-0:01, irq=POLL)
  369. <6>[   22.062151] dwmac-sun8i 1c30000.ethernet eth0: No Safety Features support found
  370. <6>[   22.062168] dwmac-sun8i 1c30000.ethernet eth0: No MAC Management Counters available
  371. <4>[   22.062174] dwmac-sun8i 1c30000.ethernet eth0: PTP not supported by HW
  372. <6>[   22.062688] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
  373. <6>[   23.074974] dwmac-sun8i 1c30000.ethernet eth0: Link is Up - 1Gbps/Full - flow control rx/tx
  374. <6>[   23.075008] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
  375. <5>[   23.637311] FS-Cache: Loaded
  376. <5>[   23.818492] FS-Cache: Netfs 'cifs' registered for caching
  377. <5>[   23.818888] Key type cifs.spnego registered
  378. <5>[   23.818898] Key type cifs.idmap registered
  379. <6>[   48.841080] fuse init (API version 7.27)
  380. <5>[   55.695913] cfg80211: Loading compiled-in X.509 certificates for regulatory database
  381. <5>[   55.731212] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
  382. <4>[   55.736785] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
  383. <6>[   55.736797] cfg80211: failed to load regulatory.db
  384. <4>[ 2034.258813] hrtimer: interrupt took 589392 ns
RAW Paste Data

Adblocker detected! Please consider disabling it...

We've detected AdBlock Plus or some other adblocking software preventing Pastebin.com from fully loading.

We don't have any obnoxious sound, or popup ads, we actively block these annoying types of ads!

Please add Pastebin.com to your ad blocker whitelist or disable your adblocking software.

×