Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- System Information
- ------------------
- Raspberry Pi Zero W Rev 1.1
- PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
- NAME="Raspbian GNU/Linux"
- VERSION_ID="11"
- VERSION="11 (bullseye)"
- Raspberry Pi reference 2024-10-22
- Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 511ffc4ff1529cb6f3eb3c8143d21a30faa1c43e, stage2
- Linux remote 6.1.21+ #1642 Mon Apr 3 17:19:14 BST 2023 armv6l GNU/Linux
- Revision : 9000c1
- Serial : 00000000d2a4976f
- Model : Raspberry Pi Zero W Rev 1.1
- Throttled flag : throttled=0x0
- Camera : supported=0 detected=0, libcamera interfaces=0
- Videocore information
- ---------------------
- Mar 17 2023 10:52:42
- Copyright (c) 2012 Broadcom
- version 82f3750a65fadae9a38077e3c2e217ad158c8d54 (clean) (release) (start)
- alloc failures: 0
- compactions: 0
- legacy block fails: 0
- Filesystem information
- ----------------------
- Filesystem 1K-blocks Used Available Use% Mounted on
- /dev/root 29453736 3181068 25043528 12% /
- devtmpfs 88504 0 88504 0% /dev
- tmpfs 219792 0 219792 0% /dev/shm
- tmpfs 87920 928 86992 2% /run
- tmpfs 5120 4 5116 1% /run/lock
- /dev/mmcblk0p1 261106 51636 209470 20% /boot
- tmpfs 43956 0 43956 0% /run/user/1000
- Filename Type Size Used Priority
- /var/swap file 102396 0 -2
- Package version information
- ---------------------------
- raspberrypi-ui-mods:
- Installed: (none)
- raspberrypi-sys-mods:
- Installed: 20230510~bullseye
- openbox:
- Installed: (none)
- lxpanel:
- Installed: (none)
- pcmanfm:
- Installed: (none)
- rpd-plym-splash:
- Installed: (none)
- Networking Information
- ----------------------
- lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
- inet x.x.x.x netmask x.x.x.x
- inet6 ::1 prefixlen 128 scopeid 0x10<host>
- loop txqueuelen 1000 (Local Loopback)
- RX packets 12 bytes 1682 (1.6 KiB)
- RX errors 0 dropped 0 overruns 0 frame 0
- TX packets 12 bytes 1682 (1.6 KiB)
- TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
- wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
- inet x.x.x.x netmask x.x.x.x broadcast x.x.x.x
- inet6 y.y.y.y.y.y.y.y prefixlen 64 scopeid 0x0<global>
- inet6 y.y.y.y.y.y.y.y prefixlen 64 scopeid 0x0<global>
- inet6 y::y.y.y.y prefixlen 64 scopeid 0x20<link>
- ether m.m.m.m txqueuelen 1000 (Ethernet)
- RX packets 8657 bytes 917392 (895.8 KiB)
- RX errors 0 dropped 0 overruns 0 frame 0
- TX packets 2420 bytes 473252 (462.1 KiB)
- TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
- USB Information
- ---------------
- /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc_otg/1p, 480M
- Display Information
- -------------------
- Running (F)KMS, console
- /sys/class/drm/card0-HDMI-A-1
- /sys/class/drm/card0-Writeback-1
- Connector 0 (32) HDMI-A-1 (disconnected)
- Encoder 0 (31) TMDS
- /sys/kernel/debug/dri/0/state:
- plane[41]: plane-0
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=0
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- plane[58]: plane-1
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=0
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- plane[69]: plane-2
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=0
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- plane[80]: plane-3
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=0
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- plane[91]: plane-4
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=1
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- plane[101]: plane-5
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=2
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- plane[111]: plane-6
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=3
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- plane[121]: plane-7
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=4
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- plane[131]: plane-8
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=5
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- plane[141]: plane-9
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=6
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- plane[151]: plane-10
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=7
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- plane[161]: plane-11
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=8
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- plane[171]: plane-12
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=9
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- plane[181]: plane-13
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=a
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- plane[191]: plane-14
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=b
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- plane[201]: plane-15
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=c
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- plane[211]: plane-16
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=d
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- plane[221]: plane-17
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=e
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- plane[231]: plane-18
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=f
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- plane[241]: plane-19
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=10
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- plane[251]: plane-20
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=11
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- plane[261]: plane-21
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=11
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- plane[271]: plane-22
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=11
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- plane[281]: plane-23
- crtc=(null)
- fb=0
- crtc-pos=0x0+0+0
- src-pos=0.000000x0.000000+0.000000+0.000000
- rotation=1
- normalized-zpos=11
- color-encoding=ITU-R BT.709 YCbCr
- color-range=YCbCr limited range
- crtc[51]: txp
- enable=0
- active=0
- self_refresh_active=0
- planes_changed=0
- mode_changed=0
- active_changed=0
- connectors_changed=0
- color_mgmt_changed=0
- plane_mask=0
- connector_mask=0
- encoder_mask=0
- mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
- crtc[68]: pixelvalve-0
- enable=0
- active=0
- self_refresh_active=0
- planes_changed=0
- mode_changed=0
- active_changed=0
- connectors_changed=0
- color_mgmt_changed=0
- plane_mask=0
- connector_mask=0
- encoder_mask=0
- mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
- crtc[79]: pixelvalve-1
- enable=0
- active=0
- self_refresh_active=0
- planes_changed=0
- mode_changed=0
- active_changed=0
- connectors_changed=0
- color_mgmt_changed=0
- plane_mask=0
- connector_mask=0
- encoder_mask=0
- mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
- crtc[90]: pixelvalve-2
- enable=0
- active=0
- self_refresh_active=0
- planes_changed=0
- mode_changed=0
- active_changed=0
- connectors_changed=0
- color_mgmt_changed=0
- plane_mask=0
- connector_mask=0
- encoder_mask=0
- mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
- connector[32]: HDMI-A-1
- crtc=(null)
- self_refresh_aware=0
- max_requested_bpc=8
- connector[57]: Writeback-1
- crtc=(null)
- self_refresh_aware=0
- max_requested_bpc=0
- config.txt
- ----------
- aphy_params_current=547
- arm_freq=1000
- arm_freq_min=700
- audio_pwm_mode=514
- camera_auto_detect=1
- config_hdmi_boost=5
- core_freq=400
- disable_auto_turbo=1
- disable_commandline_tags=2
- disable_overscan=1
- display_auto_detect=1
- display_hdmi_rotate=-1
- display_lcd_rotate=-1
- dphy_params_current=547
- dvfs=3
- enable_tvout=1
- force_eeprom_read=1
- force_pwm_open=1
- framebuffer_ignore_alpha=1
- framebuffer_swap=1
- gpu_freq=300
- ignore_lcd=1
- init_uart_clock=0x2dc6c00
- mask_gpu_interrupt0=3072
- mask_gpu_interrupt1=26370
- max_framebuffers=2
- over_voltage_avs=0x249f0
- pause_burst_frames=1
- program_serial_random=1
- sdram_freq=450
- total_mem=512
- hdmi_force_cec_address:0=65535
- hdmi_force_cec_address:1=65535
- hdmi_pixel_freq_limit:0=0x9a7ec80
- device_tree=-
- overlay_prefix=overlays/
- hdmi_cvt:0=
- hdmi_cvt:1=
- hdmi_edid_filename:0=
- hdmi_edid_filename:1=
- hdmi_timings:0=
- hdmi_timings:1=
- cmdline.txt
- -----------
- coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i smsc95xx.macaddr=B8:27:EB:A4:97:6F vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 console=ttyS0,115200 console=tty1 root=PARTUUID=15476788-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE
- raspi-gpio settings
- -------------------
- BANK0 (GPIO 0 to 27):
- GPIO 0: level=1 fsel=0 func=INPUT
- GPIO 1: level=1 fsel=0 func=INPUT
- GPIO 2: level=1 fsel=4 alt=0 func=SDA1
- GPIO 3: level=1 fsel=4 alt=0 func=SCL1
- GPIO 4: level=1 fsel=1 func=OUTPUT
- GPIO 5: level=1 fsel=0 func=INPUT
- GPIO 6: level=1 fsel=0 func=INPUT
- GPIO 7: level=1 fsel=0 func=INPUT
- GPIO 8: level=1 fsel=0 func=INPUT
- GPIO 9: level=0 fsel=0 func=INPUT
- GPIO 10: level=1 fsel=0 func=INPUT
- GPIO 11: level=1 fsel=0 func=INPUT
- GPIO 12: level=0 fsel=0 func=INPUT
- GPIO 13: level=0 fsel=0 func=INPUT
- GPIO 14: level=0 fsel=0 func=INPUT
- GPIO 15: level=1 fsel=0 func=INPUT
- GPIO 16: level=0 fsel=0 func=INPUT
- GPIO 17: level=0 fsel=0 func=INPUT
- GPIO 18: level=1 fsel=0 func=INPUT
- GPIO 19: level=1 fsel=0 func=INPUT
- GPIO 20: level=0 fsel=0 func=INPUT
- GPIO 21: level=0 fsel=0 func=INPUT
- GPIO 22: level=0 fsel=0 func=INPUT
- GPIO 23: level=0 fsel=0 func=INPUT
- GPIO 24: level=0 fsel=0 func=INPUT
- GPIO 25: level=0 fsel=0 func=INPUT
- GPIO 26: level=1 fsel=0 func=INPUT
- GPIO 27: level=0 fsel=0 func=INPUT
- BANK1 (GPIO 28 to 45):
- GPIO 28: level=1 fsel=0 func=INPUT
- GPIO 29: level=1 fsel=0 func=INPUT
- GPIO 30: level=0 fsel=7 alt=3 func=CTS0
- GPIO 31: level=0 fsel=7 alt=3 func=RTS0
- GPIO 32: level=1 fsel=7 alt=3 func=TXD0
- GPIO 33: level=1 fsel=7 alt=3 func=RXD0
- GPIO 34: level=1 fsel=7 alt=3 func=SD1_CLK
- GPIO 35: level=1 fsel=7 alt=3 func=SD1_CMD
- GPIO 36: level=1 fsel=7 alt=3 func=SD1_DAT0
- GPIO 37: level=1 fsel=7 alt=3 func=SD1_DAT1
- GPIO 38: level=1 fsel=7 alt=3 func=SD1_DAT2
- GPIO 39: level=1 fsel=7 alt=3 func=SD1_DAT3
- GPIO 40: level=0 fsel=1 func=OUTPUT
- GPIO 41: level=1 fsel=1 func=OUTPUT
- GPIO 42: level=0 fsel=0 func=INPUT
- GPIO 43: level=0 fsel=4 alt=0 func=GPCLK2
- GPIO 44: level=0 fsel=1 func=OUTPUT
- GPIO 45: level=1 fsel=1 func=OUTPUT
- BANK2 (GPIO 46 to 53):
- GPIO 46: level=1 fsel=0 func=INPUT
- GPIO 47: level=0 fsel=1 func=OUTPUT
- GPIO 48: level=0 fsel=4 alt=0 func=SD0_CLK
- GPIO 49: level=1 fsel=4 alt=0 func=SD0_CMD
- GPIO 50: level=1 fsel=4 alt=0 func=SD0_DAT0
- GPIO 51: level=1 fsel=4 alt=0 func=SD0_DAT1
- GPIO 52: level=1 fsel=4 alt=0 func=SD0_DAT2
- GPIO 53: level=1 fsel=4 alt=0 func=SD0_DAT3
- vcdbg log messages
- ------------------
- 000943.801: brfs: File read: /mfs/sd/config.txt
- 000944.756: brfs: File read: 2148 bytes
- 000977.083: HDMI0:EDID error reading EDID block 0 attempt 0
- 000978.348: HDMI0:EDID error reading EDID block 0 attempt 1
- 000979.613: HDMI0:EDID error reading EDID block 0 attempt 2
- 000980.877: HDMI0:EDID error reading EDID block 0 attempt 3
- 000982.144: HDMI0:EDID error reading EDID block 0 attempt 4
- 000983.407: HDMI0:EDID error reading EDID block 0 attempt 5
- 000984.672: HDMI0:EDID error reading EDID block 0 attempt 6
- 000985.936: HDMI0:EDID error reading EDID block 0 attempt 7
- 000987.202: HDMI0:EDID error reading EDID block 0 attempt 8
- 000988.466: HDMI0:EDID error reading EDID block 0 attempt 9
- 000989.490: HDMI0:EDID giving up on reading EDID block 0
- 000991.724: brfs: File read: /mfs/sd/config.txt
- 000992.724: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined
- 001489.817: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined
- 001489.870: *** Restart logging
- 001489.897: brfs: File read: 2148 bytes
- 001490.644: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0
- 001491.914: hdmi: HDMI0:EDID error reading EDID block 0 attempt 1
- 001493.181: hdmi: HDMI0:EDID error reading EDID block 0 attempt 2
- 001494.451: hdmi: HDMI0:EDID error reading EDID block 0 attempt 3
- 001495.719: hdmi: HDMI0:EDID error reading EDID block 0 attempt 4
- 001496.988: hdmi: HDMI0:EDID error reading EDID block 0 attempt 5
- 001498.256: hdmi: HDMI0:EDID error reading EDID block 0 attempt 6
- 001499.526: hdmi: HDMI0:EDID error reading EDID block 0 attempt 7
- 001500.794: hdmi: HDMI0:EDID error reading EDID block 0 attempt 8
- 001502.063: hdmi: HDMI0:EDID error reading EDID block 0 attempt 9
- 001503.089: hdmi: HDMI0:EDID giving up on reading EDID block 0
- 001503.425: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0
- 001504.695: hdmi: HDMI0:EDID error reading EDID block 0 attempt 1
- 001505.962: hdmi: HDMI0:EDID error reading EDID block 0 attempt 2
- 001507.232: hdmi: HDMI0:EDID error reading EDID block 0 attempt 3
- 001508.500: hdmi: HDMI0:EDID error reading EDID block 0 attempt 4
- 001509.770: hdmi: HDMI0:EDID error reading EDID block 0 attempt 5
- 001511.037: hdmi: HDMI0:EDID error reading EDID block 0 attempt 6
- 001512.308: hdmi: HDMI0:EDID error reading EDID block 0 attempt 7
- 001513.576: hdmi: HDMI0:EDID error reading EDID block 0 attempt 8
- 001514.845: hdmi: HDMI0:EDID error reading EDID block 0 attempt 9
- 001515.870: hdmi: HDMI0:EDID giving up on reading EDID block 0
- 001515.915: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
- 001515.938: HDMI0: hdmi_pixel_encoding: 162000000
- 001516.206: vec: vec_middleware_power_on: vec_base: 0x7e806000 rev-id 0x00002708 @ vec: 0x7e806100 @ 0x00000420 enc: 0x7e806060 @ 0x00000220 cgmsae: 0x7e80605c @ 0x00000000
- 001517.125: kernel=
- 001522.258: dtb_file 'bcm2708-rpi-zero-w.dtb'
- 001525.751: brfs: File read: /mfs/sd/bcm2708-rpi-zero-w.dtb
- 001525.775: Loaded 'bcm2708-rpi-zero-w.dtb' to 0x100 size 0x7363
- 001539.467: brfs: File read: 29539 bytes
- 001553.467: brfs: File read: /mfs/sd/overlays/overlay_map.dtb
- 001638.537: brfs: File read: 2347 bytes
- 001641.882: brfs: File read: /mfs/sd/config.txt
- 001642.216: dtparam: i2c_arm=on
- 001651.034: dtparam: audio=on
- 001656.630: brfs: File read: 2148 bytes
- 001676.589: brfs: File read: /mfs/sd/overlays/vc4-kms-v3d.dtbo
- 001721.297: Loaded overlay 'vc4-kms-v3d'
- 001816.270: brfs: File read: 2760 bytes
- 001825.694: brfs: File read: /mfs/sd/overlays/i2c-gpio.dtbo
- 001831.513: Loaded overlay 'i2c-gpio'
- 001831.531: dtparam: i2c_gpio_sda=10
- 001831.879: dtparam: i2c_gpio_scl=11
- 001854.499: brfs: File read: 1055 bytes
- 001876.688: brfs: File read: /mfs/sd/overlays/test.dtbo
- 001888.481: Loaded overlay 'test'
- 001888.498: dtparam: bus=11
- 001994.121: brfs: File read: 3266 bytes
- 001996.375: brfs: File read: /mfs/sd/cmdline.txt
- 001996.420: Read command line from file 'cmdline.txt':
- 001996.440: 'console=serial0,115200 console=tty1 root=PARTUUID=15476788-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE'
- 002410.692: gpioman: gpioman_get_pin_num: pin EMMC_ENABLE not defined
- 002435.406: brfs: File read: 131 bytes
- 002822.635: brfs: File read: /mfs/sd/kernel.img
- 002822.658: Loaded 'kernel.img' to 0x8000 size 0x62abe0
- 002822.696: Device tree loaded to 0x1bfe8000 (size 0x7f2d)
- 002829.290: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined
- 007654.095: vchiq_core: vchiq_init_state: slot_zero = 0x8bd80000, is_master = 1
- dmesg log
- ---------
- [ 0.000000] Booting Linux on physical CPU 0x0
- [ 0.000000] Linux version 6.1.21+ (dom@buildbot) (arm-linux-gnueabihf-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0, GNU ld (GNU Binutils for Ubuntu) 2.34) #1642 Mon Apr 3 17:19:14 BST 2023
- [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
- [ 0.000000] OF: fdt: Machine model: Raspberry Pi Zero W Rev 1.1
- [ 0.000000] random: crng init done
- [ 0.000000] Memory policy: Data cache writeback
- [ 0.000000] Reserved memory: created CMA memory pool at 0x0bc00000, size 256 MiB
- [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
- [ 0.000000] Zone ranges:
- [ 0.000000] Normal [mem 0x0000000000000000-0x000000001bffffff]
- [ 0.000000] Movable zone start for each node
- [ 0.000000] Early memory node ranges
- [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001bffffff]
- [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001bffffff]
- [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
- [ 0.000000] pcpu-alloc: [0] 0
- [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 113680
- [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=Composite-1:720x480@60i smsc95xx.macaddr=m.m.m.m vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 console=ttyS0,115200 console=tty1 root=PARTUUID=15476788-02 rootfstype=ext4 fsck.repair=yes rootwait cfg80211.ieee80211_regdom=DE
- [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
- [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
- [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
- [ 0.000000] Memory: 177012K/458752K available (8985K kernel code, 1450K rwdata, 2772K rodata, 432K init, 589K bss, 19596K reserved, 262144K cma-reserved)
- [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
- [ 0.000000] ftrace: allocating 33370 entries in 98 pages
- [ 0.000000] ftrace: allocated 98 pages with 3 groups
- [ 0.000000] trace event string verifier disabled
- [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
- [ 0.000007] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns
- [ 0.000082] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns
- [ 0.000182] bcm2835: system timer (irq = 27)
- [ 0.001062] Console: colour dummy device 80x30
- [ 0.001644] printk: console [tty1] enabled
- [ 0.001734] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792)
- [ 0.060332] pid_max: default: 32768 minimum: 301
- [ 0.060569] LSM: Security Framework initializing
- [ 0.060903] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.060987] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 0.062757] cgroup: Disabling memory control group subsystem
- [ 0.063226] CPU: Testing write buffer coherency: ok
- [ 0.065097] cblist_init_generic: Setting adjustable number of callback queues.
- [ 0.065185] cblist_init_generic: Setting shift to 0 and lim to 1.
- [ 0.065461] cblist_init_generic: Setting shift to 0 and lim to 1.
- [ 0.065813] Setting up static identity map for 0x8220 - 0x8258
- [ 0.067294] devtmpfs: initialized
- [ 0.081522] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5
- [ 0.082001] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
- [ 0.082101] futex hash table entries: 256 (order: -1, 3072 bytes, linear)
- [ 0.123852] pinctrl core: initialized pinctrl subsystem
- [ 0.126065] NET: Registered PF_NETLINK/PF_ROUTE protocol family
- [ 0.129412] DMA: preallocated 1024 KiB pool for atomic coherent allocations
- [ 0.136583] audit: initializing netlink subsys (disabled)
- [ 0.138332] thermal_sys: Registered thermal governor 'step_wise'
- [ 0.139295] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
- [ 0.139398] hw-breakpoint: maximum watchpoint size is 4 bytes.
- [ 0.139678] Serial: AMBA PL011 UART driver
- [ 0.140834] audit: type=2000 audit(0.130:1): state=initialized audit_enabled=0 res=1
- [ 0.149426] bcm2835-mbox 2000b880.mailbox: mailbox enabled
- [ 0.170926] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-03-17T10:52:42, variant start
- [ 0.180956] raspberrypi-firmware soc:firmware: Firmware hash is 82f3750a65fadae9a38077e3c2e217ad158c8d54
- [ 0.235650] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
- [ 2.427587] bcm2835-dma 20007000.dma: DMA legacy API manager, dmachans=0x1
- [ 2.430534] SCSI subsystem initialized
- [ 2.431108] usbcore: registered new interface driver usbfs
- [ 2.431275] usbcore: registered new interface driver hub
- [ 2.431419] usbcore: registered new device driver usb
- [ 2.431836] usb_phy_generic phy: supply vcc not found, using dummy regulator
- [ 2.432235] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
- [ 2.432812] pps_core: LinuxPPS API ver. 1 registered
- [ 2.432871] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <[email protected]>
- [ 2.432958] PTP clock support registered
- [ 2.436178] clocksource: Switched to clocksource timer
- [ 2.567985] VFS: Disk quotas dquot_6.6.0
- [ 2.568190] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
- [ 2.568470] FS-Cache: Loaded
- [ 2.568935] CacheFiles: Loaded
- [ 2.590564] NET: Registered PF_INET protocol family
- [ 2.590988] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear)
- [ 2.593659] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear)
- [ 2.593797] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
- [ 2.593886] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
- [ 2.594009] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
- [ 2.594160] TCP: Hash tables configured (established 4096 bind 4096)
- [ 2.594342] UDP hash table entries: 256 (order: 0, 4096 bytes, linear)
- [ 2.594428] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear)
- [ 2.594870] NET: Registered PF_UNIX/PF_LOCAL protocol family
- [ 2.595986] RPC: Registered named UNIX socket transport module.
- [ 2.596073] RPC: Registered udp transport module.
- [ 2.596109] RPC: Registered tcp transport module.
- [ 2.596141] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 2.597472] armv6-pmu arm-pmu: hw perfevents: no irqs for PMU, sampling events not supported
- [ 2.597607] hw perfevents: enabled with armv6_1176 PMU driver, 3 counters available
- [ 2.601909] Initialise system trusted keyrings
- [ 2.603080] workingset: timestamp_bits=14 max_order=17 bucket_order=3
- [ 2.618249] zbud: loaded
- [ 2.623069] NFS: Registering the id_resolver key type
- [ 2.623208] Key type id_resolver registered
- [ 2.623253] Key type id_legacy registered
- [ 2.623517] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
- [ 2.623575] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
- [ 2.626010] Key type asymmetric registered
- [ 2.626106] Asymmetric key parser 'x509' registered
- [ 2.626615] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
- [ 2.626692] io scheduler mq-deadline registered
- [ 2.626732] io scheduler kyber registered
- [ 2.631891] simple-framebuffer 1eaa9000.framebuffer: framebuffer at 0x1eaa9000, 0x151800 bytes
- [ 2.632006] simple-framebuffer 1eaa9000.framebuffer: format=a8r8g8b8, mode=720x480x32, linelength=2880
- [ 2.638573] Console: switching to colour frame buffer device 90x30
- [ 2.646616] simple-framebuffer 1eaa9000.framebuffer: fb0: simplefb registered!
- [ 2.658616] bcm2835-rng 20104000.rng: hwrng registered
- [ 2.662658] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB)
- [ 2.671297] gpiomem-bcm2835 20200000.gpiomem: Initialised: Registers at 0x20200000
- [ 2.698383] brd: module loaded
- [ 2.714739] loop: module loaded
- [ 2.719528] Loading iSCSI transport class v2.0-870.
- [ 2.725410] usbcore: registered new interface driver smsc95xx
- [ 2.729007] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
- [ 3.460729] Core Release: 2.80a
- [ 3.464176] Setting default values for core params
- [ 3.467628] Finished setting default values for core params
- [ 3.671240] Using Buffer DMA mode
- [ 3.674588] Periodic Transfer Interrupt Enhancement - disabled
- [ 3.678011] Multiprocessor Interrupt Enhancement - disabled
- [ 3.681313] OTG VER PARAM: 0, OTG VER FLAG: 0
- [ 3.684607] Dedicated Tx FIFOs mode
- [ 3.688926] WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = cbd04000 dma = 0x8bd04000 len=9024
- [ 3.698668] FIQ FSM acceleration enabled for :
- Non-periodic Split Transactions
- Periodic Split Transactions
- High-Speed Isochronous Endpoints
- Interrupt/Control Split Transaction hack enabled
- [ 3.713739] dwc_otg: Microframe scheduler enabled
- [ 3.713954] WARN::hcd_init_fiq:457: FIQ on core 0
- [ 3.719597] WARN::hcd_init_fiq:458: FIQ ASM at c065d3d8 length 36
- [ 3.724969] WARN::hcd_init_fiq:497: MPHI regs_base at dc810000
- [ 3.730487] dwc_otg 20980000.usb: DWC OTG Controller
- [ 3.733336] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1
- [ 3.736294] dwc_otg 20980000.usb: irq 56, io mem 0x00000000
- [ 3.739152] Init: Port Power? op_state=1
- [ 3.741916] Init: Power Port (0)
- [ 3.745006] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
- [ 3.750616] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.753585] usb usb1: Product: DWC OTG Controller
- [ 3.756534] usb usb1: Manufacturer: Linux 6.1.21+ dwc_otg_hcd
- [ 3.759492] usb usb1: SerialNumber: 20980000.usb
- [ 3.763722] hub 1-0:1.0: USB hub found
- [ 3.766850] hub 1-0:1.0: 1 port detected
- [ 3.770834] dwc_otg: FIQ enabled
- [ 3.770866] dwc_otg: NAK holdoff enabled
- [ 3.770878] dwc_otg: FIQ split-transaction FSM enabled
- [ 3.770907] Module dwc_common_port init
- [ 3.771489] usbcore: registered new interface driver usb-storage
- [ 3.774892] mousedev: PS/2 mouse device common for all mice
- [ 3.781336] sdhci: Secure Digital Host Controller Interface driver
- [ 3.784352] sdhci: Copyright(c) Pierre Ossman
- [ 3.788087] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 3.792661] ledtrig-cpu: registered to indicate activity on CPUs
- [ 3.796492] hid: raw HID events driver (C) Jiri Kosina
- [ 3.799829] usbcore: registered new interface driver usbhid
- [ 3.802830] usbhid: USB HID core driver
- [ 3.806030] bcm2835_vchiq 2000b840.mailbox: there is not valid maps for state default
- [ 3.815114] Initializing XFRM netlink socket
- [ 3.818982] NET: Registered PF_PACKET protocol family
- [ 3.822663] Key type dns_resolver registered
- [ 3.827258] registered taskstats version 1
- [ 3.830370] Loading compiled-in X.509 certificates
- [ 3.853698] uart-pl011 20201000.serial: cts_event_workaround enabled
- [ 3.857196] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2
- [ 3.867136] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
- [ 3.870878] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
- [ 3.876542] mmc-bcm2835 20300000.mmcnr: mmc_debug:0 mmc_debug2:0
- [ 3.879765] mmc-bcm2835 20300000.mmcnr: DMA channel allocated
- [ 3.912262] sdhost: log_buf @ 05ca8ea9 (8bd03000)
- [ 3.964701] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
- [ 3.971978] of_cfs_init
- [ 3.975922] of_cfs_init: OK
- [ 3.984070] Waiting for root device PARTUUID=15476788-02...
- [ 4.015346] mmc0: host does not support reading read-only switch, assuming write-enable
- [ 4.020644] mmc0: Problem switching card into high-speed mode!
- [ 4.025173] mmc0: new SDHC card at address 0001
- [ 4.030123] mmcblk0: mmc0:0001 SD32G 28.8 GiB
- [ 4.038613] mmcblk0: p1 p2
- [ 4.043145] mmcblk0: mmc0:0001 SD32G 28.8 GiB
- [ 4.093909] mmc1: new high speed SDIO card at address 0001
- [ 4.111108] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Quota mode: none.
- [ 4.117338] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
- [ 4.135869] devtmpfs: mounted
- [ 4.144406] Freeing unused kernel image (initmem) memory: 432K
- [ 4.147834] Kernel memory protection not selected by kernel config.
- [ 4.151086] Run /sbin/init as init process
- [ 4.154208] with arguments:
- [ 4.154222] /sbin/init
- [ 4.154234] with environment:
- [ 4.154241] HOME=/
- [ 4.154252] TERM=linux
- [ 5.172110] systemd[1]: System time before build time, advancing clock.
- [ 5.581358] NET: Registered PF_INET6 protocol family
- [ 5.587467] Segment Routing with IPv6
- [ 5.590747] In-situ OAM (IOAM) with IPv6
- [ 5.739316] systemd[1]: systemd 247.3-7+rpi1+deb11u6 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
- [ 5.750728] systemd[1]: Detected architecture arm.
- [ 5.784103] systemd[1]: Set hostname to <remote>.
- [ 8.846513] systemd[1]: Queued start job for default target Multi-User System.
- [ 8.864205] systemd[1]: Created slice system-getty.slice.
- [ 8.875464] systemd[1]: Created slice system-modprobe.slice.
- [ 8.886652] systemd[1]: Created slice system-systemd\x2dfsck.slice.
- [ 8.897039] systemd[1]: Created slice User and Session Slice.
- [ 8.905850] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
- [ 8.915033] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
- [ 8.926120] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
- [ 8.939286] systemd[1]: Reached target Local Encrypted Volumes.
- [ 8.949033] systemd[1]: Reached target Paths.
- [ 8.957996] systemd[1]: Reached target Slices.
- [ 8.966845] systemd[1]: Reached target Swap.
- [ 8.977785] systemd[1]: Listening on Syslog Socket.
- [ 8.987806] systemd[1]: Listening on fsck to fsckd communication Socket.
- [ 8.997238] systemd[1]: Listening on initctl Compatibility Named Pipe.
- [ 9.008440] systemd[1]: Listening on Journal Audit Socket.
- [ 9.018832] systemd[1]: Listening on Journal Socket (/dev/log).
- [ 9.029558] systemd[1]: Listening on Journal Socket.
- [ 9.046834] systemd[1]: Listening on udev Control Socket.
- [ 9.057224] systemd[1]: Listening on udev Kernel Socket.
- [ 9.067654] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
- [ 9.084534] systemd[1]: Mounting POSIX Message Queue File System...
- [ 9.121269] systemd[1]: Mounting RPC Pipe File System...
- [ 9.169871] systemd[1]: Mounting Kernel Debug File System...
- [ 9.229860] systemd[1]: Mounting Kernel Trace File System...
- [ 9.259226] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
- [ 9.298785] systemd[1]: Starting Restore / save the current clock...
- [ 9.342058] systemd[1]: Starting Set the console keyboard layout...
- [ 9.426503] systemd[1]: Starting Create list of static device nodes for the current kernel...
- [ 9.527513] systemd[1]: Starting Load Kernel Module configfs...
- [ 9.608111] systemd[1]: Starting Load Kernel Module drm...
- [ 9.678176] systemd[1]: Starting Load Kernel Module fuse...
- [ 9.728860] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
- [ 9.817965] systemd[1]: Starting File System Check on Root Device...
- [ 9.997963] systemd[1]: Starting Journal Service...
- [ 10.147719] systemd[1]: Starting Load Kernel Modules...
- [ 10.249747] fuse: init (API version 7.37)
- [ 10.277954] systemd[1]: Starting Coldplug All udev Devices...
- [ 10.513163] systemd[1]: Mounted POSIX Message Queue File System.
- [ 10.590789] systemd[1]: Mounted RPC Pipe File System.
- [ 10.668881] systemd[1]: Mounted Kernel Debug File System.
- [ 10.735312] systemd[1]: Mounted Kernel Trace File System.
- [ 10.826447] systemd[1]: Finished Restore / save the current clock.
- [ 10.923451] i2c_dev: i2c /dev entries driver
- [ 10.931600] systemd[1]: Finished Create list of static device nodes for the current kernel.
- [ 11.037300] systemd[1]: [email protected]: Succeeded.
- [ 11.066704] systemd[1]: Finished Load Kernel Module configfs.
- [ 11.138549] systemd[1]: [email protected]: Succeeded.
- [ 11.176735] systemd[1]: Finished Load Kernel Module fuse.
- [ 11.229773] systemd[1]: [email protected]: Succeeded.
- [ 11.276734] systemd[1]: Finished Load Kernel Module drm.
- [ 11.328759] systemd[1]: Finished Load Kernel Modules.
- [ 11.477149] systemd[1]: Mounting FUSE Control File System...
- [ 11.636701] systemd[1]: Mounting Kernel Configuration File System...
- [ 11.765003] systemd[1]: Started File System Check Daemon to report status.
- [ 11.897894] systemd[1]: Starting Apply Kernel Variables...
- [ 12.026643] systemd[1]: Finished File System Check on Root Device.
- [ 12.090218] systemd[1]: Mounted FUSE Control File System.
- [ 12.169796] systemd[1]: Mounted Kernel Configuration File System.
- [ 12.301132] systemd[1]: Starting Remount Root and Kernel File Systems...
- [ 12.547035] systemd[1]: Finished Apply Kernel Variables.
- [ 12.574718] systemd[1]: Started Journal Service.
- [ 13.356615] EXT4-fs (mmcblk0p2): re-mounted. Quota mode: none.
- [ 13.909562] systemd-journald[106]: Received client request to flush runtime journal.
- [ 18.458076] i2c-gpio b.i2c: using lines 10 (SDA) and 11 (SCL)
- [ 18.460179] i2c-gpio ffffffff.i2c: error trying to get descriptor: -16
- [ 18.460232] i2c-gpio: probe of ffffffff.i2c failed with error -16
- [ 19.164614] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
- [ 19.269092] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
- [ 19.269153] [vc_sm_connected_init]: start
- [ 19.296960] [vc_sm_connected_init]: installed successfully
- [ 19.406719] mc: Linux media interface: v0.10
- [ 20.600821] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
- [ 20.676898] videodev: Linux video capture interface: v2.00
- [ 21.488336] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
- [ 21.520821] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
- [ 21.569642] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
- [ 21.680825] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
- [ 21.770168] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
- [ 21.771008] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
- [ 21.814527] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
- [ 21.847320] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
- [ 21.847396] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
- [ 21.847438] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
- [ 21.847469] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
- [ 21.847499] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
- [ 21.867066] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
- [ 21.871826] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
- [ 21.887607] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
- [ 21.890614] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
- [ 21.907995] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
- [ 21.921610] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
- [ 21.921696] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
- [ 21.921730] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
- [ 21.921761] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
- [ 21.932660] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
- [ 22.255539] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
- [ 22.458465] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
- [ 22.458565] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
- [ 22.506626] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
- [ 22.506722] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
- [ 22.571853] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
- [ 22.571956] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
- [ 22.627343] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
- [ 22.627456] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
- [ 22.728971] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
- [ 22.729051] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
- [ 29.015246] uart-pl011 20201000.serial: no DMA platform data
- [ 29.226967] Adding 102396k swap on /var/swap. Priority:-2 extents:1 across:102396k SSFS
- [ 31.461477] cfg80211: Loading compiled-in X.509 certificates for regulatory database
- [ 31.557833] 8021q: 802.1Q VLAN Support v1.8
- [ 32.038006] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
- [ 32.065522] cfg80211: loaded regulatory.db is malformed or signature is missing/invalid
- [ 33.756526] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
- [ 33.783738] Console: switching to colour dummy device 80x30
- [ 33.792523] vc4-drm soc:gpu: bound 20400000.hvs (ops vc4_hvs_ops [vc4])
- [ 33.816386] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
- [ 33.818018] usbcore: registered new interface driver brcmfmac
- [ 33.849936] Registered IR keymap rc-cec
- [ 33.850223] rc rc0: vc4-hdmi as /devices/platform/soc/20902000.hdmi/rc/rc0
- [ 33.850525] input: vc4-hdmi as /devices/platform/soc/20902000.hdmi/rc/rc0/input0
- [ 33.968969] vc4-drm soc:gpu: bound 20902000.hdmi (ops vc4_hdmi_ops [vc4])
- [ 33.969928] vc4-drm soc:gpu: bound 20004000.txp (ops vc4_txp_ops [vc4])
- [ 34.087442] vc4-drm soc:gpu: bound 20206000.pixelvalve (ops vc4_crtc_ops [vc4])
- [ 34.092350] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Jul 19 2021 03:24:18 version 7.45.98 (TOB) (56df937 CY) FWID 01-8e14b897
- [ 34.101481] vc4-drm soc:gpu: bound 20207000.pixelvalve (ops vc4_crtc_ops [vc4])
- [ 34.124690] vc4-drm soc:gpu: bound 20807000.pixelvalve (ops vc4_crtc_ops [vc4])
- [ 34.210883] vc4-drm soc:gpu: bound 20c00000.v3d (ops vc4_v3d_ops [vc4])
- [ 34.367537] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
- [ 34.378283] vc4-drm soc:gpu: [drm] Cannot find any crtc or sizes
- [ 34.599459] Bluetooth: Core ver 2.22
- [ 34.599631] NET: Registered PF_BLUETOOTH protocol family
- [ 34.599647] Bluetooth: HCI device and connection manager initialized
- [ 34.599681] Bluetooth: HCI socket layer initialized
- [ 34.599699] Bluetooth: L2CAP socket layer initialized
- [ 34.599736] Bluetooth: SCO socket layer initialized
- [ 34.643176] Bluetooth: HCI UART driver ver 2.3
- [ 34.643218] Bluetooth: HCI UART protocol H4 registered
- [ 34.643353] Bluetooth: HCI UART protocol Three-wire (H5) registered
- [ 34.643612] Bluetooth: HCI UART protocol Broadcom registered
- [ 35.400849] gpio gpiochip1: (mcp23017): not an immutable chip, please consider fixing it!
- [ 35.412129] at24 11-0050: supply vcc not found, using dummy regulator
- [ 35.456416] ------------[ cut here ]------------
- [ 35.456448] WARNING: CPU: 0 PID: 404 at drivers/gpio/gpiolib.c:3367 gpiochip_enable_irq+0x98/0xc0
- [ 35.456496] Modules linked in: at24(+) pinctrl_mcp23s08_i2c(+) pinctrl_mcp23s08 regmap_i2c hci_uart btbcm bluetooth ecdh_generic ecc libaes brcmfmac vc4 brcmutil snd_soc_hdmi_codec sha256_generic libsha256 8021q drm_display_helper garp stp cec llc drm_dma_helper cfg80211 drm_kms_helper snd_soc_core bcm2835_codec(C) snd_compress snd_pcm_dmaengine syscopyarea bcm2835_v4l2(C) sysfillrect sysimgblt raspberrypi_hwmon v4l2_mem2mem fb_sys_fops bcm2835_isp(C) bcm2835_mmal_vchiq(C) videobuf2_vmalloc videobuf2_dma_contig videobuf2_memops videobuf2_v4l2 videobuf2_common rfkill snd_bcm2835(C) videodev snd_pcm i2c_bcm2835 snd_timer snd mc vc_sm_cma(C) i2c_gpio i2c_algo_bit uio_pdrv_genirq fixed uio drm i2c_dev fuse drm_panel_orientation_quirks backlight ip_tables x_tables ipv6
- [ 35.456829] CPU: 0 PID: 404 Comm: modprobe Tainted: G C 6.1.21+ #1642
- [ 35.456848] Hardware name: BCM2835
- [ 35.456867] unwind_backtrace from show_stack+0x18/0x1c
- [ 35.456902] show_stack from dump_stack_lvl+0x34/0x58
- [ 35.456931] dump_stack_lvl from __warn+0x7c/0xf8
- [ 35.456964] __warn from warn_slowpath_fmt+0x60/0xcc
- [ 35.457000] warn_slowpath_fmt from gpiochip_enable_irq+0x98/0xc0
- [ 35.457030] gpiochip_enable_irq from bcm2835_gpio_irq_unmask+0x38/0x98
- [ 35.457054] bcm2835_gpio_irq_unmask from unmask_irq.part.8+0x28/0x3c
- [ 35.457088] unmask_irq.part.8 from irq_startup+0xbc/0xf4
- [ 35.457115] irq_startup from __setup_irq+0x6b0/0x7b0
- [ 35.457140] __setup_irq from request_threaded_irq+0xe0/0x164
- [ 35.457164] request_threaded_irq from devm_request_threaded_irq+0x6c/0xc8
- [ 35.457192] devm_request_threaded_irq from mcp23s08_probe_one+0x310/0x46c [pinctrl_mcp23s08]
- [ 35.457284] mcp23s08_probe_one [pinctrl_mcp23s08] from mcp230xx_probe+0xe4/0x14c [pinctrl_mcp23s08_i2c]
- [ 35.457361] mcp230xx_probe [pinctrl_mcp23s08_i2c] from i2c_device_probe+0x284/0x2a4
- [ 35.457407] i2c_device_probe from really_probe+0xcc/0x2b8
- [ 35.457430] really_probe from __driver_probe_device+0x88/0xec
- [ 35.457448] __driver_probe_device from driver_probe_device+0x34/0xcc
- [ 35.457466] driver_probe_device from __driver_attach+0x74/0x108
- [ 35.457486] __driver_attach from bus_for_each_dev+0x78/0xbc
- [ 35.457521] bus_for_each_dev from bus_add_driver+0x184/0x1e8
- [ 35.457553] bus_add_driver from driver_register+0x7c/0x114
- [ 35.457578] driver_register from i2c_register_driver+0x40/0x90
- [ 35.457598] i2c_register_driver from do_one_initcall+0x3c/0x1bc
- [ 35.457626] do_one_initcall from do_init_module+0x48/0x1fc
- [ 35.457651] do_init_module from load_module+0x1a90/0x1d04
- [ 35.457670] load_module from sys_init_module+0x164/0x194
- [ 35.457689] sys_init_module from __sys_trace_return+0x0/0x10
- [ 35.457708] Exception stack(0xdd8c1fa8 to 0xdd8c1ff0)
- [ 35.457727] 1fa0: 0002fa2c 01b67b70 01b67b70 00002150 0002de04 00000000
- [ 35.457744] 1fc0: 0002fa2c 01b67b70 00040000 00000080 01b57660 00000000 00000000 01b57448
- [ 35.457757] 1fe0: 00040e0c be8bf970 00023c04 b6ca3110
- [ 35.457767] ---[ end trace 0000000000000000 ]---
- [ 35.463018] gpio gpiochip2: (mcp23017): not an immutable chip, please consider fixing it!
- [ 38.031171] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 38.031211] Bluetooth: BNEP filters: protocol multicast
- [ 38.031241] Bluetooth: BNEP socket layer initialized
- [ 38.073595] Bluetooth: MGMT ver 1.22
- [ 38.174407] NET: Registered PF_ALG protocol family
- [ 38.908499] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
- [ 40.587334] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
- [ 42.735400] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instead
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement