Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000 / 01-01 00:00:00.000] Booting Linux on physical CPU 0
- [ 0.000000 / 01-01 00:00:00.000] Initializing cgroup subsys cpu
- [ 0.000000 / 01-01 00:00:00.000] Linux version 3.4.0-perf-gf43df35-dirty (playfulgod@techygeek) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Sun Jun 15 16:44:19 EDT 2014
- [ 0.000000 / 01-01 00:00:00.000] CPU: ARMv7 Processor [512f06f0] revision 0 (ARMv7), cr=10c5387d
- [ 0.000000 / 01-01 00:00:00.000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
- [ 0.000000 / 01-01 00:00:00.000] Machine: Qualcomm MSM 8974 (Flattened Device Tree), model: Qualcomm MSM 8974v2.2 Z TMO
- [ 0.000000 / 01-01 00:00:00.000] Physical memory hole is not aligned. There will be a virtual memory hole from c5d00000 to c5e00000
- [ 0.000000 / 01-01 00:00:00.000] qcom,ion-heap@28 reserved EBI1 size 614000
- [ 0.000000 / 01-01 00:00:00.000] qcom,mdss_fb_primary reserved EBI1 size 1000000
- [ 0.000000 / 01-01 00:00:00.000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-5000000
- [ 0.000000 / 01-01 00:00:00.000] qcom,msm-rtb reserved EBI1 size 100000
- [ 0.000000 / 01-01 00:00:00.000] qcom,msm-contig-mem reserved EBI1 size 280000
- [ 0.000000 / 01-01 00:00:00.000] Node qcom,msm-mem-hole removed memory 5d00000-da00000
- [ 0.000000 / 01-01 00:00:00.000] Node qcom,msm-mem-hole removed memory fa00000-ff00000
- [ 0.000000 / 01-01 00:00:00.000] memory pool 3 (start 0x7e600000 size 1a00000) initialized
- [ 0.000000 / 01-01 00:00:00.000] PERSIST RAM CONSOLE START ADDR : 0x7e500000
- [ 0.000000 / 01-01 00:00:00.000] Initialized persistent memory from 7e500000-7e5fffff
- [ 0.000000 / 01-01 00:00:00.000] cma: CMA: reserved 16 MiB at 20400000
- [ 0.000000 / 01-01 00:00:00.000] cma: Found secure_region, memory base 0, size 252 MiB
- [ 0.000000 / 01-01 00:00:00.000] cma: CMA: reserved 252 MiB at 6e800000
- [ 0.000000 / 01-01 00:00:00.000] cma: Found adsp_region, memory base 0, size 63 MiB
- [ 0.000000 / 01-01 00:00:00.000] cma: CMA: reserved 64 MiB at 6a800000
- [ 0.000000 / 01-01 00:00:00.000] cma: Found qsecom_region, memory base 0, size 17 MiB
- [ 0.000000 / 01-01 00:00:00.000] cma: CMA: reserved 20 MiB at 69400000
- [ 0.000000 / 01-01 00:00:00.000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000 / 01-01 00:00:00.000] IMEM DT static mapping successful
- [ 0.000000 / 01-01 00:00:00.000] PERCPU: Embedded 9 pages/cpu @c244a000 s16000 r8192 d12672 u36864
- [ 0.000000 / 01-01 00:00:00.000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 480256
- [ 0.000000 / 01-01 00:00:00.000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=z user_debug=31 msm_rtb.filter=0x0 mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_lgd_poled_720p_video androidboot.selinux=permissive lge.signed_image=false androidboot.emmc=true androidboot.serialno=0814c18be05d4fa9 lge.signed_image=true androidboot.baseband=msm vmalloc=600m uart_console lge.rev=rev_10 lcd_maker_id=1 cont_splash_enabled=true gpt androidboot.mode lge.bootreason=0x0 lge.kcal lge.hreset=off androidboot.laf androidboot.dlcomplete=0 lge.bnr androidboot.lge.lcdbreak_mode=true maxcpus=4
- [ 0.000000 / 01-01 00:00:00.000] BOARD : LGE rev_10
- [ 0.000000 / 01-01 00:00:00.000] cont splash enabled : true
- [ 0.000000 / 01-01 00:00:00.000] androidboot.dlcomplete = 0
- [ 0.000000 / 01-01 00:00:00.000] PID hash table entries: 2048 (order: 1, 8192 bytes)
- [ 0.000000 / 01-01 00:00:00.000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000 / 01-01 00:00:00.000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.000000 / 01-01 00:00:00.000] Memory: 93MB 32MB 1767MB = 1892MB total
- [ 0.000000 / 01-01 00:00:00.000] Memory: 1506540k/1506540k available, 457492k reserved, 1180672K highmem
- [ 0.000000 / 01-01 00:00:00.000] Virtual kernel memory layout:
- [ 0.000000 / 01-01 00:00:00.000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000 / 01-01 00:00:00.000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000 / 01-01 00:00:00.000] vmalloc : 0xda000000 - 0xff000000 ( 592 MB)
- [ 0.000000 / 01-01 00:00:00.000] lowmem : 0xc0000000 - 0xd9800000 ( 408 MB)
- [ 0.000000 / 01-01 00:00:00.000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000 / 01-01 00:00:00.000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000 / 01-01 00:00:00.000] .text : 0xc0008000 - 0xc0e41cf0 (14568 kB)
- [ 0.000000 / 01-01 00:00:00.000] .init : 0xc0f00000 - 0xc1030e80 (1220 kB)
- [ 0.000000 / 01-01 00:00:00.000] .data : 0xc1032000 - 0xc110cc80 ( 876 kB)
- [ 0.000000 / 01-01 00:00:00.000] .bss : 0xc110cca4 - 0xc13f41fc (2974 kB)
- [ 0.000000 / 01-01 00:00:00.000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000 / 01-01 00:00:00.000] Preemptible hierarchical RCU implementation.
- [ 0.000000 / 01-01 00:00:00.000] RCU dyntick-idle grace-period acceleration is enabled.
- [ 0.000000 / 01-01 00:00:00.000] Dump stacks of tasks blocking RCU-preempt GP.
- [ 0.000000 / 01-01 00:00:00.000] NR_IRQS:16 nr_irqs:16 16
- [ 0.000000 / 01-01 00:00:00.000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
- [ 0.000000 / 01-01 00:00:00.000] Switching to timer-based delay loop
- [ 0.000000 / 01-01 00:00:00.000] Console: colour dummy device 80x30
- [ 0.000082 / 01-01 00:00:00.000] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
- [ 0.000101 / 01-01 00:00:00.000] pid_max: default: 32768 minimum: 301
- [ 0.000233 / 01-01 00:00:00.000] Security Framework initialized
- [ 0.000260 / 01-01 00:00:00.000] SELinux: Initializing.
- [ 0.000367 / 01-01 00:00:00.000] Mount-cache hash table entries: 512
- [ 0.001115 / 01-01 00:00:00.000] Initializing cgroup subsys debug
- [ 0.001129 / 01-01 00:00:00.000] Initializing cgroup subsys cpuacct
- [ 0.001140 / 01-01 00:00:00.000] Initializing cgroup subsys freezer
- [ 0.001152 / 01-01 00:00:00.000] Initializing cgroup subsys net_cls
- [ 0.001190 / 01-01 00:00:00.000] CPU: Testing write buffer coherency: ok
- [ 0.001355 / 01-01 00:00:00.000] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.001467 / 01-01 00:00:00.000] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
- [ 0.004144 / 01-01 00:00:00.000] Setting up static identity map for 0x9f94c0 - 0x9f9548
- [ 0.004164 / 01-01 00:00:00.000] MSM Memory Dump table set up
- [ 0.005493 / 01-01 00:00:00.000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.006231 / 01-01 00:00:00.000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.006973 / 01-01 00:00:00.000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.007061 / 01-01 00:00:00.000] Brought up 4 CPUs
- [ 0.007077 / 01-01 00:00:00.000] SMP: Total of 4 processors activated (153.60 BogoMIPS).
- [ 0.018370 / 01-01 00:00:00.010] dummy:
- [ 0.030067 / 01-01 00:00:00.020] NET: Registered protocol family 16
- [ 0.032869 / 01-01 00:00:00.030] DMA: preallocated 256 KiB pool for atomic coherent allocations
- [ 0.034940 / 01-01 00:00:00.030] KPI: Bootloader start count = 55911
- [ 0.034952 / 01-01 00:00:00.030] KPI: Bootloader end count = 82064
- [ 0.034962 / 01-01 00:00:00.030] KPI: Bootloader display count = 63905
- [ 0.034972 / 01-01 00:00:00.030] KPI: Bootloader load kernel count = 13347
- [ 0.034984 / 01-01 00:00:00.030] KPI: Kernel MPM timestamp = 103268
- [ 0.034993 / 01-01 00:00:00.030] KPI: Kernel MPM Clock frequency = 32768
- [ 0.035012 / 01-01 00:00:00.030] socinfo_print: v8, id=126, ver=2.2, raw_id=1968, raw_ver=7, hw_plat=130, hw_plat_ver=65536
- [ 0.035020 / 01-01 00:00:00.030] accessory_chip=0, hw_plat_subtype=0, pmic_model=65537, pmic_die_revision=196609
- [ 0.051408 / 01-01 00:00:00.040] gpiochip_add: registered GPIOs 0 to 145 on device: msmgpio
- [ 0.066677 / 01-01 00:00:00.060] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
- [ 0.087864 / 01-01 00:00:00.080] 8841_s1: 675 <--> 1050 mV at 0 mV normal idle
- [ 0.088330 / 01-01 00:00:00.080] 8841_s1_ao: 675 <--> 1050 mV at 0 mV normal idle
- [ 0.088779 / 01-01 00:00:00.080] 8841_s1_so: 675 <--> 1050 mV at 675 mV normal idle
- [ 0.089269 / 01-01 00:00:00.080] 8841_s2: 500 <--> 1050 mV at 0 mV normal idle
- [ 0.089718 / 01-01 00:00:00.080] 8841_s2_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.090179 / 01-01 00:00:00.080] 8841_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
- [ 0.090636 / 01-01 00:00:00.080] 8841_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.091129 / 01-01 00:00:00.080] 8841_s3: 1050 mV normal idle
- [ 0.091659 / 01-01 00:00:00.090] 8841_s4: 815 <--> 900 mV at 0 mV normal idle
- [ 0.092114 / 01-01 00:00:00.090] 8841_s4_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.092569 / 01-01 00:00:00.090] 8841_s4_floor_corner: 0 <--> 0 mV at 0 mV normal idle
- [ 0.093037 / 01-01 00:00:00.090] 8941_s1: 1300 mV normal idle
- [ 0.093515 / 01-01 00:00:00.090] 8941_s2: 2150 mV normal idle
- [ 0.093989 / 01-01 00:00:00.090] 8941_s3: 1800 mV normal idle
- [ 0.094471 / 01-01 00:00:00.090] 8941_l1: 1225 mV normal idle
- [ 0.094959 / 01-01 00:00:00.090] 8941_l2: 1200 mV normal idle
- [ 0.095427 / 01-01 00:00:00.090] 8941_l3: 1225 mV normal idle
- [ 0.095914 / 01-01 00:00:00.090] 8941_l4: 1225 mV normal idle
- [ 0.096375 / 01-01 00:00:00.090] 8941_l5: 1800 mV normal idle
- [ 0.096859 / 01-01 00:00:00.090] 8941_l6: 1800 mV normal idle
- [ 0.097335 / 01-01 00:00:00.090] 8941_l7: 1800 mV normal idle
- [ 0.097817 / 01-01 00:00:00.090] 8941_l8: 1800 mV normal idle
- [ 0.098303 / 01-01 00:00:00.090] 8941_l9: 1800 <--> 2950 mV at 2950 mV normal idle
- [ 0.098780 / 01-01 00:00:00.090] 8941_l10: 1800 <--> 2950 mV at 2950 mV normal idle
- [ 0.099284 / 01-01 00:00:00.090] 8941_l11: 1225 mV normal idle
- [ 0.099760 / 01-01 00:00:00.090] 8941_l12: 1800 mV normal idle
- [ 0.100206 / 01-01 00:00:00.090] 8941_l12_ao: 1800 mV normal idle
- [ 0.100684 / 01-01 00:00:00.090] 8941_l13: 1800 <--> 2950 mV at 2950 mV normal idle
- [ 0.101170 / 01-01 00:00:00.090] 8941_l14: 1800 mV normal idle
- [ 0.101684 / 01-01 00:00:00.100] 8941_l15: 2050 mV normal idle
- [ 0.102158 / 01-01 00:00:00.100] 8941_l16: 2700 mV normal idle
- [ 0.102658 / 01-01 00:00:00.100] 8941_l17: 2850 mV normal idle
- [ 0.103143 / 01-01 00:00:00.100] 8941_l18: 2850 mV normal idle
- [ 0.103629 / 01-01 00:00:00.100] 8941_l19: 3300 mV normal idle
- [ 0.104115 / 01-01 00:00:00.100] 8941_l20: 2950 mV normal idle
- [ 0.104594 / 01-01 00:00:00.100] 8941_l21: 2950 mV normal idle
- [ 0.105096 / 01-01 00:00:00.100] 8941_l22: 3300 mV normal idle
- [ 0.105578 / 01-01 00:00:00.100] 8941_l23: 3300 mV normal idle
- [ 0.106079 / 01-01 00:00:00.100] 8941_l24: 3075 mV normal idle
- [ 0.106552 / 01-01 00:00:00.100] 8941_lvs1:
- [ 0.106982 / 01-01 00:00:00.100] 8941_lvs2:
- [ 0.107399 / 01-01 00:00:00.100] 8941_lvs3:
- [ 0.109456 / 01-01 00:00:00.100] PDN krait_pdn_phase_scaling_init: eFuse phase scaling factor = 2/4
- [ 0.109470 / 01-01 00:00:00.100] PDN krait_pdn_phase_scaling_init: initial phase scaling factor = 2/4
- [ 0.109791 / 01-01 00:00:00.100] krait0: 500 <--> 1100 mV at 900 mV fast normal idle
- [ 0.110292 / 01-01 00:00:00.100] krait1: 500 <--> 1100 mV at 900 mV fast normal idle
- [ 0.110795 / 01-01 00:00:00.100] krait2: 500 <--> 1100 mV at 900 mV fast normal idle
- [ 0.111293 / 01-01 00:00:00.100] krait3: 500 <--> 1100 mV at 900 mV fast normal idle
- [ 0.148877 / 01-01 00:00:00.140] vdd_restriction_reg_init:Defer vdd rstr freq init
- [ 0.149285 / 01-01 00:00:00.140] persistent_ram: found existing buffer, size 137860, start 137860
- [ 0.151336 / 01-01 00:00:00.140] console [ram-1] enabled
- [ 0.151546 / 01-01 00:00:00.140] init_bcm_wifi: wifi_dma_qos is added
- [ 0.151563 / 01-01 00:00:00.140] bcm_wifi_init_gpio_mem: rev=10, gpio_power=26, gpio_hostwakeup=44
- [ 0.151696 / 01-01 00:00:00.150] J:bcm_wifi_init_gpio_mem> resource->start = 312
- [ 0.151757 / 01-01 00:00:00.150] brcm_init_wlan_mem: WIFI MEM Allocated
- [ 0.151769 / 01-01 00:00:00.150] bcm_wifi_init_gpio_mem successfully
- [ 0.151871 / 01-01 00:00:00.150] KCAL_DEBUG : lge_add_lcd_kcal_devices
- [ 0.151992 / 01-01 00:00:00.150] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.152007 / 01-01 00:00:00.150] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.155133 / 01-01 00:00:00.150] 8941_boost: 5000 mV
- [ 0.155618 / 01-01 00:00:00.150] 8941_mvs1:
- [ 0.155668 / 01-01 00:00:00.150] 8941_mvs1: supplied by 8941_boost
- [ 0.156151 / 01-01 00:00:00.150] 8941_mvs2:
- [ 0.156197 / 01-01 00:00:00.150] 8941_mvs2: supplied by 8941_boost
- [ 0.161107 / 01-01 00:00:00.150] sps:BAM 0xf9984000 (va:0xda0e0000) enabled: ver:0x6, number of pipes:20
- [ 0.161125 / 01-01 00:00:00.150] sps:BAM 0xf9984000 is registered.
- [ 0.161148 / 01-01 00:00:00.150] sps:sps is ready.
- [ 0.163402 / 01-01 00:00:00.160] gdsc_venus:
- [ 0.163747 / 01-01 00:00:00.160] gdsc_mdss:
- [ 0.164083 / 01-01 00:00:00.160] gdsc_jpeg:
- [ 0.164449 / 01-01 00:00:00.160] gdsc_vfe:
- [ 0.164766 / 01-01 00:00:00.160] gdsc_oxili_gx:
- [ 0.164839 / 01-01 00:00:00.160] gdsc_oxili_gx: supplied by 8841_s4_corner
- [ 0.165190 / 01-01 00:00:00.160] gdsc_oxili_cx:
- [ 0.165475 / 01-01 00:00:00.160] gdsc_usb_hsic:
- [ 0.166032 / 01-01 00:00:00.160] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
- [ 0.171659 / 01-01 00:00:00.160] msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr da400000
- [ 0.172100 / 01-01 00:00:00.170] Physical OCMEM zone layout:
- [ 0.172118 / 01-01 00:00:00.170] zone graphics : 0xfec00000 - 0xfecfffff (1024 KB)
- [ 0.172135 / 01-01 00:00:00.170] zone lp_audio : 0xfed00000 - 0xfed7ffff ( 512 KB)
- [ 0.172152 / 01-01 00:00:00.170] zone video : 0xfed00000 - 0xfed7ffff ( 512 KB)
- [ 0.198547 / 01-01 00:00:00.190] bio: create slab <bio-0> at 0
- [ 0.199250 / 01-01 00:00:00.190] ethernet_phy:
- [ 0.199538 / 01-01 00:00:00.190] vph_pwr:
- [ 0.200442 / 01-01 00:00:00.190] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
- [ 0.200527 / 01-01 00:00:00.190] ION-heap mm: Cannot specify alignment for this type of heap
- [ 0.200624 / 01-01 00:00:00.190] cma: Assigned CMA region at 0 to 16.qcom,ion-heap device
- [ 0.200707 / 01-01 00:00:00.190] ION-heap adsp: Cannot specify alignment for this type of heap
- [ 0.200804 / 01-01 00:00:00.190] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
- [ 0.201300 / 01-01 00:00:00.190] ION heap system created
- [ 0.201413 / 01-01 00:00:00.190] ION heap kmalloc created
- [ 0.201448 / 01-01 00:00:00.190] ION heap mm created at 0x6e800000 with size fc00000
- [ 0.201485 / 01-01 00:00:00.190] ION heap adsp created at 0x6a800000 with size 3f00000
- [ 0.201516 / 01-01 00:00:00.190] ION heap qsecom created at 0x69400000 with size 1100000
- [ 0.201564 / 01-01 00:00:00.190] ION heap audio created at 0x7e600000 with size 614000
- [ 0.201596 / 01-01 00:00:00.190] ION heap pil_1 created at 0x05d00000 with size 1e00000
- [ 0.203358 / 01-01 00:00:00.200] SCSI subsystem initialized
- [ 0.203521 / 01-01 00:00:00.200] usbcore: registered new interface driver usbfs
- [ 0.203613 / 01-01 00:00:00.200] usbcore: registered new interface driver hub
- [ 0.203727 / 01-01 00:00:00.200] usbcore: registered new device driver usb
- [ 0.203794 / 01-01 00:00:00.200] ts_info_init : ts_info calss create
- [ 0.204146 / 01-01 00:00:00.200] Linux media interface: v0.10
- [ 0.204202 / 01-01 00:00:00.200] Linux video capture interface: v2.00
- [ 0.207069 / 01-01 00:00:00.200] msm_iommu_v1 fda64000.qcom,iommu: device jpeg_iommu mapped at da1c0000, with 3 ctx banks
- [ 0.208210 / 01-01 00:00:00.200] msm_iommu_v1 fd928000.qcom,iommu: device mdp_iommu mapped at da1e0000, with 3 ctx banks
- [ 0.209964 / 01-01 00:00:00.200] msm_iommu_v1 fdc84000.qcom,iommu: device venus_iommu mapped at da280000, with 5 ctx banks
- [ 0.211034 / 01-01 00:00:00.200] msm_iommu_v1 fdb10000.qcom,iommu: device kgsl_iommu mapped at da2a0000, with 3 ctx banks
- [ 0.212079 / 01-01 00:00:00.210] msm_iommu_v1 fda44000.qcom,iommu: device vfe_iommu mapped at da2c0000, with 3 ctx banks
- [ 0.213019 / 01-01 00:00:00.210] msm_iommu_ctx_v1 fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0
- [ 0.213146 / 01-01 00:00:00.210] msm_iommu_ctx_v1 fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1
- [ 0.213266 / 01-01 00:00:00.210] msm_iommu_ctx_v1 fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2
- [ 0.213394 / 01-01 00:00:00.210] msm_iommu_ctx_v1 fd930000.qcom,iommu-ctx: context mdp_0 using bank 0
- [ 0.213523 / 01-01 00:00:00.210] msm_iommu_ctx_v1 fd931000.qcom,iommu-ctx: context mdp_1 using bank 1
- [ 0.213641 / 01-01 00:00:00.210] msm_iommu_ctx_v1 fd932000.qcom,iommu-ctx: context mdp_2 using bank 2
- [ 0.213768 / 01-01 00:00:00.210] msm_iommu_ctx_v1 fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0
- [ 0.213907 / 01-01 00:00:00.210] msm_iommu_ctx_v1 fdc8d000.qcom,iommu-ctx: context venus_sec_bitstream using bank 1
- [ 0.214027 / 01-01 00:00:00.210] msm_iommu_ctx_v1 fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2
- [ 0.214149 / 01-01 00:00:00.210] msm_iommu_ctx_v1 fdc8f000.qcom,iommu-ctx: context venus_sec_pixel using bank 3
- [ 0.214268 / 01-01 00:00:00.210] msm_iommu_ctx_v1 fdc90000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
- [ 0.214418 / 01-01 00:00:00.210] msm_iommu_ctx_v1 fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0
- [ 0.214536 / 01-01 00:00:00.210] msm_iommu_ctx_v1 fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1
- [ 0.214654 / 01-01 00:00:00.210] msm_iommu_ctx_v1 fdb1a000.qcom,iommu-ctx: context gfx3d_spare using bank 2
- [ 0.214792 / 01-01 00:00:00.210] msm_iommu_ctx_v1 fda4c000.qcom,iommu-ctx: context vfe0 using bank 0
- [ 0.214911 / 01-01 00:00:00.210] msm_iommu_ctx_v1 fda4d000.qcom,iommu-ctx: context vfe1 using bank 1
- [ 0.215029 / 01-01 00:00:00.210] msm_iommu_ctx_v1 fda4e000.qcom,iommu-ctx: context cpp using bank 2
- [ 0.215902 / 01-01 00:00:00.210] Advanced Linux Sound Architecture Driver Version 1.0.25.
- [ 0.216422 / 01-01 00:00:00.210] Bluetooth: Core ver 2.16
- [ 0.216478 / 01-01 00:00:00.210] NET: Registered protocol family 31
- [ 0.216491 / 01-01 00:00:00.210] Bluetooth: HCI device and connection manager initialized
- [ 0.216506 / 01-01 00:00:00.210] Bluetooth: HCI socket layer initialized
- [ 0.216521 / 01-01 00:00:00.210] Bluetooth: L2CAP socket layer initialized
- [ 0.216705 / 01-01 00:00:00.210] Bluetooth: SCO socket layer initialized
- [ 0.217049 / 01-01 00:00:00.210] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.218324 / 01-01 00:00:00.210] Switching to clocksource arch_sys_counter
- [ 0.250843 / 01-01 00:00:00.240] NET: Registered protocol family 2
- [ 0.251044 / 01-01 00:00:00.240] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
- [ 0.251461 / 01-01 00:00:00.240] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.252039 / 01-01 00:00:00.240] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
- [ 0.252669 / 01-01 00:00:00.240] TCP: Hash tables configured (established 65536 bind 65536)
- [ 0.252683 / 01-01 00:00:00.240] TCP: reno registered
- [ 0.252703 / 01-01 00:00:00.240] UDP hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.252726 / 01-01 00:00:00.240] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
- [ 0.252967 / 01-01 00:00:00.240] NET: Registered protocol family 1
- [ 0.253234 / 01-01 00:00:00.240] Trying to unpack rootfs image as initramfs...
- [ 0.385849 / 01-01 00:00:00.370] Freeing initrd memory: 2824K
- [ 0.385882 / 01-01 00:00:00.370] VFP support v0.3: implementor 51 architecture 64 part 6f variant 2 rev 0
- [ 0.385927 / 01-01 00:00:00.370] VFP support v0.3: Return
- [ 0.389324 / 01-01 00:00:00.380] Detected 9 counters on the L2CC PMU.
- [ 0.390976 / 01-01 00:00:00.380] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
- [ 0.391685 / 01-01 00:00:00.380] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
- [ 0.391838 / 01-01 00:00:00.380] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
- [ 0.392551 / 01-01 00:00:00.380] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
- [ 0.392698 / 01-01 00:00:00.380] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
- [ 0.393443 / 01-01 00:00:00.380] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
- [ 0.393618 / 01-01 00:00:00.380] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
- [ 0.394364 / 01-01 00:00:00.380] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
- [ 0.394512 / 01-01 00:00:00.380] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
- [ 0.395278 / 01-01 00:00:00.380] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
- [ 0.395450 / 01-01 00:00:00.380] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
- [ 0.396228 / 01-01 00:00:00.380] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
- [ 0.396376 / 01-01 00:00:00.380] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
- [ 0.397159 / 01-01 00:00:00.380] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
- [ 0.397350 / 01-01 00:00:00.380] gpiochip_add: registered GPIOs 544 to 575 on device: rdbg
- [ 0.398161 / 01-01 00:00:00.380] gpiochip_add: registered GPIOs 512 to 543 on device: rdbg
- [ 0.398319 / 01-01 00:00:00.380] gpiochip_add: registered GPIOs 480 to 511 on device: rdbg
- [ 0.399205 / 01-01 00:00:00.390] gpiochip_add: registered GPIOs 448 to 479 on device: rdbg
- [ 0.400572 / 01-01 00:00:00.390] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
- [ 0.402118 / 01-01 00:00:00.390] pil-q6v5-mss fc880000.qcom,mss: probing
- [ 0.402819 / 01-01 00:00:00.390] pil-q6v5-mss fc880000.qcom,mss: mba description init success
- [ 0.402836 / 01-01 00:00:00.390] pil-q6v5-mss fc880000.qcom,mss: modem description init success
- [ 0.402856 / 01-01 00:00:00.390] pil-q6v5-mss fc880000.qcom,mss: modem: pil description init : modem
- [ 0.402873 / 01-01 00:00:00.390] pil_subsys_init : exter init
- [ 0.403449 / 01-01 00:00:00.390] pil_subsys_init : exit init
- [ 0.404298 / 01-01 00:00:00.390] pil_venus fdce0000.qcom,venus: using secure boot
- [ 0.414521 / 01-01 00:00:00.400] NET: Registered protocol family 27
- [ 0.418942 / 01-01 00:00:00.410] acpuclk-8974 qcom,acpuclk.42: SPEED BIN: 1
- [ 0.418959 / 01-01 00:00:00.410] acpuclk-8974 qcom,acpuclk.42: ACPU PVS: 3
- [ 0.418972 / 01-01 00:00:00.410] acpuclk-8974 qcom,acpuclk.42: ACPU PVS REVISION: 0
- [ 0.422973 / 01-01 00:00:00.410] acpuclk-8974 qcom,acpuclk.42: CPU Frequencies Supported: 14
- [ 0.428797 / 01-01 00:00:00.420] msm_rpm_log_probe: OK
- [ 0.433073 / 01-01 00:00:00.420] ocmem: Client sensors (id: 6) not allowed to use OCMEM
- [ 0.433090 / 01-01 00:00:00.420] OCMEM notifier registration failed
- [ 0.433104 / 01-01 00:00:00.420] sns_ocmem_main: sns_ocmem_init failed -14
- [ 0.436006 / 01-01 00:00:00.420] lge_bootlog_init: start 4046
- [ 0.436021 / 01-01 00:00:00.420] lge_bootlog_init: size 4046
- [ 0.436032 / 01-01 00:00:00.420] --------------------------------------------------------------
- [ 0.436045 / 01-01 00:00:00.420] below logs are got from bootloader
- [ 0.436056 / 01-01 00:00:00.420] --------------------------------------------------------------
- [ 0.436068 / 01-01 00:00:00.420]
- [ 0.436084 / 01-01 00:00:00.420] [0] welcome to lk
- [ 0.436095 / 01-01 00:00:00.420]
- [ 0.436111 / 01-01 00:00:00.420] [10] platform_init()
- [ 0.436131 / 01-01 00:00:00.420] [10] init_set_cable()=8 - result=0
- [ 0.436148 / 01-01 00:00:00.420] [10] LCD_MAKER_ID is 1
- [ 0.436164 / 01-01 00:00:00.420] [10] target_init()
- [ 0.436180 / 01-01 00:00:00.420] [10] display_init()
- [ 0.436196 / 01-01 00:00:00.420] [10] Setting LDO12
- [ 0.436212 / 01-01 00:00:00.420] [10] Setting LDO2
- [ 0.436228 / 01-01 00:00:00.420] [10] mdp_gdsc_ctrl
- [ 0.436246 / 01-01 00:00:00.420] [10] MDP GDSC already enabled
- [ 0.436262 / 01-01 00:00:00.420] [10] mdp_clk_init
- [ 0.436277 / 01-01 00:00:00.420] [10] mdp_dsi_pll
- [ 0.436293 / 01-01 00:00:00.420] [10] mdss_clk_init
- [ 0.436312 / 01-01 00:00:00.420] [10] Config MIPI_VIDEO_PANEL.
- [ 0.436331 / 01-01 00:00:00.420] [240] Turn on MIPI_VIDEO_PANEL.
- [ 0.436352 / 01-01 00:00:00.420] [250] Video lane tested successfully
- [ 0.436372 / 01-01 00:00:00.420] [250] cont_splash_screen is set 1
- [ 0.436390 / 01-01 00:00:00.420] [250] Diplay initialized
- [ 0.436402 / 01-01 00:00:00.420]
- [ 0.436423 / 01-01 00:00:00.420] Format: Log Type - Time(microsec) - Message
- [ 0.436450 / 01-01 00:00:00.420] Log type: B - since boot(excluding boot rom). D - delta
- [ 0.436470 / 01-01 00:00:00.420] B - 134627 - SBL1, Start
- [ 0.436495 / 01-01 00:00:00.420] B - 134627 - scatterload_region && ram_init, Start
- [ 0.436522 / 01-01 00:00:00.420] D - 0 - scatterload_region && ram_init, Delta
- [ 0.436544 / 01-01 00:00:00.420] B - 136609 - pm_device_init, Start
- [ 0.436566 / 01-01 00:00:00.420] D - 17293 - pm_device_init, Delta
- [ 0.436588 / 01-01 00:00:00.420] B - 153903 - Pre_DDR_clock_init, Start
- [ 0.436611 / 01-01 00:00:00.420] D - 91 - Pre_DDR_clock_init, Delta
- [ 0.436633 / 01-01 00:00:00.420] B - 154055 - boot_flash_init, Start
- [ 0.436655 / 01-01 00:00:00.420] D - 3629 - boot_flash_init, Delta
- [ 0.436680 / 01-01 00:00:00.420] B - 157715 - boot_config_data_table_init, Start
- [ 0.436706 / 01-01 00:00:00.420] D - 0 - boot_config_data_table_init, Delta
- [ 0.436729 / 01-01 00:00:00.420] B - 157746 - sbl1_ddr_set_params, Start
- [ 0.436752 / 01-01 00:00:00.420] D - 549 - sbl1_ddr_set_params, Delta
- [ 0.436774 / 01-01 00:00:00.420] B - 161650 - pm_driver_init, Start
- [ 0.436795 / 01-01 00:00:00.420] D - 26138 - pm_driver_init, Delta
- [ 0.436816 / 01-01 00:00:00.420] B - 187788 - clock_init, Start
- [ 0.436836 / 01-01 00:00:00.420] D - 183 - clock_init, Delta
- [ 0.436857 / 01-01 00:00:00.420] B - 200171 - Image Load, Start
- [ 0.436878 / 01-01 00:00:00.420] D - 85308 - TZ Image Loaded, Delta
- [ 0.436899 / 01-01 00:00:00.420] B - 285449 - Tz Execution, Start
- [ 0.436920 / 01-01 00:00:00.420] D - 119163 - Tz Execution, Delta
- [ 0.436941 / 01-01 00:00:00.420] B - 412726 - Image Load, Start
- [ 0.436963 / 01-01 00:00:00.420] D - 44957 - RPM Image Loaded, Delta
- [ 0.436986 / 01-01 00:00:00.420] B - 457866 - Signal PBL to Jump to RPM FW
- [ 0.437011 / 01-01 00:00:00.420] B - 457988 - sbl1_wait_for_ddr_training, Start
- [ 0.437037 / 01-01 00:00:00.420] D - 36661 - sbl1_wait_for_ddr_training, Delta
- [ 0.437060 / 01-01 00:00:00.420] B - 496662 - pwrkey_long_check, start
- [ 0.437082 / 01-01 00:00:00.420] B - 496662 - Restart cause restart
- [ 0.437104 / 01-01 00:00:00.420] D - 30 - pwr_long_key_check, Delta
- [ 0.437128 / 01-01 00:00:00.420] B - 497119 - boot_bq24192: DC is present
- [ 0.437152 / 01-01 00:00:00.420] B - 680973 - boot_bq24192: chg type = SDP
- [ 0.437176 / 01-01 00:00:00.420] B - 681461 - boot_bq24192: BATT is present
- [ 0.437200 / 01-01 00:00:00.420] B - 682102 - bq24192 voltage:3963, Trkl:0
- [ 0.437221 / 01-01 00:00:00.420] B - 682102 - Image Load, Start
- [ 0.437243 / 01-01 00:00:00.420] D - 30 - WDT Image Loaded, Delta
- [ 0.437268 / 01-01 00:00:00.420] B - 722667 - XSDAuthentication, BATT_UNKNOWN
- [ 0.437288 / 01-01 00:00:00.420] B - 1531649 - OCV_RD:63 3905
- [ 0.437307 / 01-01 00:00:00.420] B - 1531649 - OCV_EX:62 3905
- [ 0.437328 / 01-01 00:00:00.420] B - 1532045 - Image Load, Start
- [ 0.437350 / 01-01 00:00:00.420] D - 169031 - APPSBL Image Loaded, Delta
- [ 0.437374 / 01-01 00:00:00.420] B - 1701046 - sbl1_efs_handle_cookies, Start
- [ 0.437398 / 01-01 00:00:00.420] D - 366 - sbl1_efs_handle_cookies, End
- [ 0.437420 / 01-01 00:00:00.420] B - 1701686 - qfuse: fusing unFlaged
- [ 0.437438 / 01-01 00:00:00.420] B - 1701717 - SBL1, End
- [ 0.437457 / 01-01 00:00:00.420] D - 1567090 - SBL1, Delta
- [ 0.437474 / 01-01 00:00:00.420] [300] LCD BREAK MODE ON
- [ 0.437495 / 01-01 00:00:00.420] [300] cable type from shared memory: 8
- [ 0.437512 / 01-01 00:00:00.420] [300] get_qem = 0
- [ 0.437535 / 01-01 00:00:00.420] [300] smem_write_alloc_entry: src=8, dest=fa06470
- [ 0.437560 / 01-01 00:00:00.420] [300] smem_write_alloc_entry: src=0, dest=fa06474
- [ 0.437580 / 01-01 00:00:00.420] [300] [tei.kim] build type: 0
- [ 0.437604 / 01-01 00:00:00.420] [300] smem_write_alloc_entry: src=0, dest=fa06488
- [ 0.437629 / 01-01 00:00:00.420] [300] smem_write_alloc_entry: src=0, dest=fa0648c
- [ 0.437645 / 01-01 00:00:00.420] [300] get_qem = 0
- [ 0.437666 / 01-01 00:00:00.420] [300] cable type from shared memory: 8
- [ 0.437682 / 01-01 00:00:00.420] [300] get_qem = 0
- [ 0.437705 / 01-01 00:00:00.420] [300] smem_write_alloc_entry: src=8, dest=fa06470
- [ 0.437730 / 01-01 00:00:00.420] [300] smem_write_alloc_entry: src=0, dest=fa06474
- [ 0.437750 / 01-01 00:00:00.420] [300] [tei.kim] build type: 0
- [ 0.437774 / 01-01 00:00:00.420] [300] smem_write_alloc_entry: src=0, dest=fa06488
- [ 0.437799 / 01-01 00:00:00.420] [300] smem_write_alloc_entry: src=0, dest=fa0648c
- [ 0.437815 / 01-01 00:00:00.420] [300] get_qem = 0
- [ 0.437835 / 01-01 00:00:00.420] [300] restart_reason: 0x77665502
- [ 0.437853 / 01-01 00:00:00.420] [300] webdload status:0
- [ 0.437870 / 01-01 00:00:00.420] [300] webdload status:0
- [ 0.437892 / 01-01 00:00:00.420] [310] Loading boot image (11517952): start
- [ 0.437914 / 01-01 00:00:00.420] [720] Loading boot image (11517952): done
- [ 0.437933 / 01-01 00:00:00.420] [750] Secure boot started
- [ 0.437949 / 01-01 00:00:00.420] [760] Secure boot End
- [ 0.437971 / 01-01 00:00:00.420] [760] set cmdarg cont_splash_enabled true.
- [ 0.437990 / 01-01 00:00:00.420] [760] PON_PON_REASON1:0x80
- [ 0.438010 / 01-01 00:00:00.420] [760] PON_WARM_RESET_REASON1:0x2
- [ 0.438029 / 01-01 00:00:00.420] [760] PON_WARM_RESET_REASON2:0x0
- [ 0.438048 / 01-01 00:00:00.420] [760] PON_POFF_REASON1:0x2
- [ 0.438066 / 01-01 00:00:00.420] [760] PON_POFF_REASON2:0x0
- [ 0.438085 / 01-01 00:00:00.420] [760] PON_SOFT_RESET_REASON1:0x0
- [ 0.438105 / 01-01 00:00:00.420] [760] PON_SOFT_RESET_REASON2:0x0
- [ 0.438200 / 01-01 00:00:00.420] [760] get_display_kcal = 0, 0, 0, [760] lge_cmdline = console=ttyHSL0,115200,n8 androidboot.hardware=z user_debug=31 msm_rtb.filter=0x0 mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_lgd_poled_720p_video androidboot.selinux=permissive lge.signed_image=false androidboot.emmc=true androidboot.serialno=0814[760] Updating device tree: start
- [ 0.438231 / 01-01 00:00:00.420] [790] Updating device tree: done
- [ 0.438266 / 01-01 00:00:00.420] [790] booting linux @ 0x8000, ramdisk @ 0x5000000 (2895179), tags/device tree @ 0x4800000
- [ 0.438288 / 01-01 00:00:00.420] [790] Turn off MIPI_VIDEO_PANEL.
- [ 0.438314 / 01-01 00:00:00.420] [790] Continuous splash enabled, keeping panel alive.
- [ 0.438326 / 01-01 00:00:00.420]
- [ 0.438338 / 01-01 00:00:00.420] lge_bootlog_init: token (null)
- [ 0.438349 / 01-01 00:00:00.420] --------------------------------------------------------------
- [ 0.439482 / 01-01 00:00:00.430] ** [ BTRFKILL : bluetooth_rfkill_init ( 308 ) ] bluetooth_rfkill_init.
- [ 0.439792 / 01-01 00:00:00.430] ** [ BTRFKILL : bluetooth_rfkill_init ( 312 ) ] bluetooth_rfkill_init done
- [ 0.439954 / 01-01 00:00:00.430] ####init
- [ 0.440070 / 01-01 00:00:00.430] ** [ BTRFKILL : bluetooth_rfkill_probe ( 225 ) ] bluetooth_rfkill_probe
- [ 0.440093 / 01-01 00:00:00.430] ** [ BTRFKILL : bluetooth_set_power ( 190 ) ] bluetooth_set_power set blocked=1
- [ 0.440110 / 01-01 00:00:00.430] ** [ BTRFKILL : bluetooth_set_power ( 205 ) ] Bluetooth RESET LOW!!
- [ 0.440519 / 01-01 00:00:00.430] lge_qfprom_probe : qfprom init
- [ 0.441195 / 01-01 00:00:00.430] mpm_counter: [ 0.441189]:(116577)
- [ 0.444240 / 01-01 00:00:00.430] MOCA Kernel Probe module init OK!!..
- [ 0.444248 / 01-01 00:00:00.430] lge_moca_kernel_monitor_init: Init for moca irq monitor
- [ 0.444355 / 01-01 00:00:00.430] audit: initializing netlink socket (disabled)
- [ 0.444377 / 01-01 00:00:00.430] type=2000 audit(0.430:1): initialized
- [ 0.444894 / 01-01 00:00:00.430] highmem bounce pool size: 64 pages
- [ 0.447620 / 01-01 00:00:00.430] Hook version: 3.4.35 2013/03/04
- [ 0.448573 / 01-01 00:00:00.440] fuse init (API version 7.18)
- [ 0.448697 / 01-01 00:00:00.440] msgmni has been set to 673
- [ 0.449886 / 01-01 00:00:00.440] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
- [ 0.449895 / 01-01 00:00:00.440] io scheduler noop registered
- [ 0.449901 / 01-01 00:00:00.440] io scheduler deadline registered
- [ 0.449913 / 01-01 00:00:00.440] io scheduler row registered (default)
- [ 0.449931 / 01-01 00:00:00.440] io scheduler cfq registered
- [ 0.449938 / 01-01 00:00:00.440] io scheduler test-iosched registered
- [ 0.450307 / 01-01 00:00:00.440] gpiochip_add: registered GPIOs 444 to 447 on device: pm8841-mpp
- [ 0.451523 / 01-01 00:00:00.440] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xd0 incorrect owner 4
- [ 0.451578 / 01-01 00:00:00.440] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xd1 incorrect owner 4
- [ 0.451723 / 01-01 00:00:00.440] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xd4 incorrect owner 4
- [ 0.452051 / 01-01 00:00:00.440] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xdb incorrect owner 2
- [ 0.452199 / 01-01 00:00:00.440] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xde incorrect owner 2
- [ 0.452447 / 01-01 00:00:00.440] gpiochip_add: registered GPIOs 409 to 443 on device: pm8941-gpio
- [ 0.455087 / 01-01 00:00:00.440] spmi_pmic_arb fc4cf000.qcom,spmi: PPID 0xa2 incorrect owner 2
- [ 0.455335 / 01-01 00:00:00.440] gpiochip_add: registered GPIOs 403 to 408 on device: pm8941-mpp
- [ 0.456085 / 01-01 00:00:00.440] mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xda340000
- [ 0.456108 / 01-01 00:00:00.440] mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xda2ec000
- [ 0.456504 / 01-01 00:00:00.440] mdss_mdp_pp_argc: >>>>> mdss_mdp_pp_argc
- [ 0.456512 / 01-01 00:00:00.440] update_preset_lcdc_lut: update_preset_lcdc_lut red=[255], green=[255], blue=[255]
- [ 0.456519 / 01-01 00:00:00.440] mdss_mdp_pp_argc_kcal: >>>>> mdss_mdp_pp_argc_kcal
- [ 0.458043 / 01-01 00:00:00.440] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
- [ 0.458098 / 01-01 00:00:00.440] mdss_dsi_panel_init: Panel Name = LGD POLED 720p video mode dsi panel,G Flex
- [ 0.458212 / 01-01 00:00:00.440] mdss_dsi_parse_dcs_cmds: failed, key=qcom,panel-ief-on-cmds
- [ 0.458219 / 01-01 00:00:00.440] mdss_dsi_parse_dcs_cmds: failed, key=qcom,panel-ief-off-cmds
- [ 0.458241 / 01-01 00:00:00.440] mdss_dsi_panel_init:1463 Continuous splash flag enabled.
- [ 0.458249 / 01-01 00:00:00.440] mdss_dsi_panel_init:1475 Partial update disabled.
- [ 0.458549 / 01-01 00:00:00.450] mdss_dsi_retrieve_ctrl_resources: dsi base=da2fa800 size=600
- [ 0.528394 / 01-01 00:00:00.520] [Zee][OLED] mdss_dsi_panel_power on
- [ 0.528536 / 01-01 00:00:00.520] mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi
- [ 0.528683 / 01-01 00:00:00.520] mdss_hw_init: MDP Rev=10020000
- [ 0.530307 / 01-01 00:00:00.520] hdmi_tx_get_dt_data: id=0
- [ 0.530314 / 01-01 00:00:00.520] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_HPD_PM'
- [ 0.530323 / 01-01 00:00:00.520] hdmi_tx_get_dt_gpio_data: mp_gpio_cnt = 1
- [ 0.530339 / 01-01 00:00:00.520] hdmi_tx_get_dt_gpio_data: gpio num=34, name=qcom,hdmi-tx-hpd, value=1
- [ 0.530346 / 01-01 00:00:00.520] hdmi_tx_get_dt_gpio_data: no gpio named qcom,hdmi-tx-mux-en
- [ 0.530353 / 01-01 00:00:00.520] hdmi_tx_get_dt_gpio_data: no gpio named qcom,hdmi-tx-mux-sel
- [ 0.530359 / 01-01 00:00:00.520] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_DDC_PM'
- [ 0.530366 / 01-01 00:00:00.520] hdmi_tx_get_dt_gpio_data: mp_gpio_cnt = 2
- [ 0.530381 / 01-01 00:00:00.520] hdmi_tx_get_dt_gpio_data: gpio num=32, name=qcom,hdmi-tx-ddc-clk, value=1
- [ 0.530396 / 01-01 00:00:00.520] hdmi_tx_get_dt_gpio_data: gpio num=33, name=qcom,hdmi-tx-ddc-data, value=1
- [ 0.530403 / 01-01 00:00:00.520] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_CORE_PM'
- [ 0.530408 / 01-01 00:00:00.520] hdmi_tx_get_dt_gpio_data: no gpio
- [ 0.530414 / 01-01 00:00:00.520] hdmi_tx_get_dt_gpio_data: module: 'HDMI_TX_CEC_PM'
- [ 0.530421 / 01-01 00:00:00.520] hdmi_tx_get_dt_gpio_data: mp_gpio_cnt = 1
- [ 0.530435 / 01-01 00:00:00.520] hdmi_tx_get_dt_gpio_data: gpio num=31, name=qcom,hdmi-tx-cec, value=1
- [ 0.530442 / 01-01 00:00:00.520] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_HPD_PM'
- [ 0.530457 / 01-01 00:00:00.520] hdmi_tx_get_dt_vreg_data: hpd-gdsc min=0, max=0, pc=0
- [ 0.530466 / 01-01 00:00:00.520] hdmi_tx_get_dt_vreg_data: hpd-5v min=0, max=0, pc=0
- [ 0.530474 / 01-01 00:00:00.520] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_DDC_PM'
- [ 0.530484 / 01-01 00:00:00.520] hdmi_tx_get_dt_vreg_data: no vreg
- [ 0.530490 / 01-01 00:00:00.520] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_CORE_PM'
- [ 0.530504 / 01-01 00:00:00.520] hdmi_tx_get_dt_vreg_data: core-vdda min=1800000, max=1800000, pc=300000
- [ 0.530514 / 01-01 00:00:00.520] hdmi_tx_get_dt_vreg_data: core-vcc min=1800000, max=1800000, pc=0
- [ 0.530520 / 01-01 00:00:00.520] hdmi_tx_get_dt_vreg_data: module: 'HDMI_TX_CEC_PM'
- [ 0.530530 / 01-01 00:00:00.520] hdmi_tx_get_dt_vreg_data: no vreg
- [ 0.530536 / 01-01 00:00:00.520] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_HPD_PM'
- [ 0.530542 / 01-01 00:00:00.520] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_DDC_PM'
- [ 0.530548 / 01-01 00:00:00.520] hdmi_tx_get_dt_clk_data: no clk
- [ 0.530554 / 01-01 00:00:00.520] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_CORE_PM'
- [ 0.530560 / 01-01 00:00:00.520] hdmi_tx_get_dt_clk_data: module: 'HDMI_TX_CEC_PM'
- [ 0.530566 / 01-01 00:00:00.520] hdmi_tx_get_dt_clk_data: no clk
- [ 0.530582 / 01-01 00:00:00.520] hdmi_tx_init_resource: 'core_physical': start = 0xda2fc100, len=0x370
- [ 0.530594 / 01-01 00:00:00.520] hdmi_tx_init_resource: 'phy_physical': start = 0xda2fe500, len=0x7c
- [ 0.530607 / 01-01 00:00:00.520] hdmi_tx_init_resource: 'qfprom_physical': start = 0xda330000, len=0x60f0
- [ 0.530815 / 01-01 00:00:00.520] hdmi_tx_check_capability: Features <HDMI:ON, HDCP:ON>
- [ 0.530822 / 01-01 00:00:00.520] hdmi_tx_check_capability: Device is HDCP enabled
- [ 0.531084 / 01-01 00:00:00.520] mdss_register_panel: adding framebuffer device fd922100.qcom,hdmi_tx
- [ 0.531289 / 01-01 00:00:00.520] hdmi_tx_probe: Add child devices.
- [ 0.533027 / 01-01 00:00:00.520] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.7
- [ 0.533568 / 01-01 00:00:00.520] mdss_fb_alloc_fbmem_iommu: mdss_fb_alloc_fbmem_iommu frame buffer reserve_size=0x1000000
- [ 0.533780 / 01-01 00:00:00.520] mdss_fb_alloc_fbmem_iommu: allocating 16777216 bytes at db000000 (7ee00000 phys) for fb 0
- [ 0.533852 / 01-01 00:00:00.520] mdss_fb_register: FrameBuffer[0] 720x1280 size=16777216 registered successfully!
- [ 0.534025 / 01-01 00:00:00.520] mdss_fb_register: FrameBuffer[1] 640x480 size=0 registered successfully!
- [ 0.534053 / 01-01 00:00:00.520] hdmi_tx_panel_event_handler: event = 13 suspend=0, hpd_feature=0
- [ 0.534073 / 01-01 00:00:00.520] hdmi_tx_sysfs_create: sysfs group d7b45608
- [ 0.534095 / 01-01 00:00:00.520] hdmi_tx_init_features: HDCP feature initialized
- [ 0.534101 / 01-01 00:00:00.520] hdmi_tx_init_features: hdmi_cec_init failed
- [ 0.534175 / 01-01 00:00:00.520] mdss_fb_register: FrameBuffer[2] 1920x1080 size=0 registered successfully!
- [ 0.534298 / 01-01 00:00:00.520] [anx7808] gpio p_dwn : 422, reset : 68, irq : 28, gpio_cbl_det 421
- [ 0.534341 / 01-01 00:00:00.520] [anx7808] gpio_v10_ctrl 416 avdd33-en-gpio 434
- [ 0.534377 / 01-01 00:00:00.520] [anx7808] anx7808_parse_dt : sp_pdev [0Xd810ce00] to pdata->pdev
- [ 0.534383 / 01-01 00:00:00.520] anx7808 init gpio
- [ 0.534530 / 01-01 00:00:00.520] sps: BAM device 0xf9944000 is not registered yet.
- [ 0.534541 / 01-01 00:00:00.520] sps:BAM 0xf9944000 is registered.
- [ 0.534547 / 01-01 00:00:00.520] msm_serial_hs: BAM device registered. bam_handle=0x0
- [ 0.537528 / 01-01 00:00:00.520] f9960000.uart: ttyHS99 at MMIO 0xf9960000 (irq = 148) is a MSM HS UART
- [ 0.539660 / 01-01 00:00:00.530] msm_serial_hs module loaded
- [ 0.539690 / 01-01 00:00:00.530] msm_serial_hsl_init: driver initialized
- [ 0.539935 / 01-01 00:00:00.530] msm_serial_hsl_probe: detected port #0 (ttyHSL0)
- [ 0.540218 / 01-01 00:00:00.530] f991d000.serial: ttyHSL0 at MMIO 0xf991d000 (irq = 139) is a MSM
- [ 0.541993 / 01-01 00:00:00.530] msm_hsl_console_setup: console setup on port #0
- [ 0.542193 / 01-01 00:00:00.530] console [ttyHSL0] enabled
- [ 0.542311 / 01-01 00:00:00.530] msm_serial_hsl_probe: detected port #1 (ttyHSL1)
- [ 0.542401 / 01-01 00:00:00.530] f9962000.serial: ttyHSL1 at MMIO 0xf9962000 (irq = 150) is a MSM
- [ 0.544372 / 01-01 00:00:00.530] kgsl bus ib [0] = 1600000000
- [ 0.544380 / 01-01 00:00:00.530] kgsl bus ib [1] = 2400000000
- [ 0.544386 / 01-01 00:00:00.530] kgsl bus ib [2] = 4656000000
- [ 0.544392 / 01-01 00:00:00.530] kgsl bus ib [3] = 7464000000
- [ 0.544398 / 01-01 00:00:00.530] kgsl bus index is 3 for pwrlevel 0
- [ 0.544408 / 01-01 00:00:00.530] kgsl bus index is 2 for pwrlevel 1
- [ 0.544413 / 01-01 00:00:00.530] kgsl bus index is 2 for pwrlevel 2
- [ 0.544422 / 01-01 00:00:00.530] kgsl bus index is 1 for pwrlevel 3
- [ 0.544966 / 01-01 00:00:00.530] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
- [ 0.549342 / 01-01 00:00:00.540] brd: module loaded
- [ 0.550606 / 01-01 00:00:00.540] loop: module loaded
- [ 0.550648 / 01-01 00:00:00.540] i2c-core: driver [isa1200] using legacy suspend method
- [ 0.550655 / 01-01 00:00:00.540] i2c-core: driver [isa1200] using legacy resume method
- [ 0.550899 / 01-01 00:00:00.540] QSEECOM: qseecom_probe: bam_pipe_pair=0x2
- [ 0.550906 / 01-01 00:00:00.540] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
- [ 0.550914 / 01-01 00:00:00.540] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x1
- [ 0.550951 / 01-01 00:00:00.540] QSEECOM: qseecom_probe: secure app region addr=0x7b00000 size=0x500000
- [ 0.551266 / 01-01 00:00:00.540] uei_irrc_init
- [ 0.551431 / 01-01 00:00:00.540] uei_irrc_probe
- [ 0.551437 / 01-01 00:00:00.540] [IRRC] probe: pdev->dev.of-node
- [ 0.551466 / 01-01 00:00:00.540] [IRRC] uei,reset-gpio: 78
- [ 0.551894 / 01-01 00:00:00.540] earjack debugger is detected on VU3 but do not allow to use it!
- [ 0.551901 / 01-01 00:00:00.540] earjack debugger probed
- [ 0.552051 / 01-01 00:00:00.540] cradle init
- [ 0.552258 / 01-01 00:00:00.540] [Hall IC] hallic_pouch_gpio: 144, hallic_camera_gpio: 0
- [ 0.552304 / 01-01 00:00:00.540] pm8xxx_cradle_probe : init cradle
- [ 0.552316 / 01-01 00:00:00.540] pm8xxx_cradle_probe : hall_pouch_gpio_irq = [309]
- [ 0.552360 / 01-01 00:00:00.540] pm8xxx_cradle_probe :enable_irq_wake Enable(1)
- [ 0.552367 / 01-01 00:00:00.540] pm8xxx_cradle_probe : pdata->irq_flags = [3]
- [ 0.552372 / 01-01 00:00:00.540] pm8xxx_cradle_probe :boot_cradle_det_func START
- [ 0.552379 / 01-01 00:00:00.540] boot_cradle_det_func : boot pouch === > 0
- [ 0.552385 / 01-01 00:00:00.540] boot_cradle_det_func : boot camera === > 0
- [ 0.552391 / 01-01 00:00:00.540] boot_cradle_det_func : [Cradle] boot cradle value is 0
- [ 0.552499 / 01-01 00:00:00.540] tspdrv: init_module.
- [ 0.553007 / 01-01 00:00:00.540] [sm100] dev->init_name : vibrator, dev->kobj : syncoam_sm100.86
- [ 0.553220 / 01-01 00:00:00.540] i2c-core: driver [tabla-i2c-core] using legacy suspend method
- [ 0.553227 / 01-01 00:00:00.540] i2c-core: driver [tabla-i2c-core] using legacy resume method
- [ 0.553288 / 01-01 00:00:00.540] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
- [ 0.553295 / 01-01 00:00:00.540] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
- [ 0.588396 / 01-01 00:00:00.580] [anx7808] sp_tx_hardware_poweron: anx7808 power on
- [ 0.588792 / 01-01 00:00:00.580] ANX7808 BA is found.
- [ 0.589333 / 01-01 00:00:00.580] [anx7808] sp_tx_vbus_powerdown : 3.3V output disabled
- [ 0.608453 / 01-01 00:00:00.600] bcm2079x 1-0077: requesting IRQ 313
- [ 0.608495 / 01-01 00:00:00.600] bcm2079x 1-0077: bcm2079x_probe, probing bcm2079x driver exited successfully
- [ 0.608664 / 01-01 00:00:00.600] SCSI Media Changer driver v0.25
- [ 0.609096 / 01-01 00:00:00.600] sps:BAM 0xf9944000 (va:0xda380000) enabled: ver:0x13, number of pipes:24
- [ 0.609332 / 01-01 00:00:00.600] spi_qsd f9966000.spi: master is unqueued, this is deprecated
- [ 0.615235 / 01-01 00:00:00.600] tun: Universal TUN/TAP device driver, 1.6
- [ 0.615243 / 01-01 00:00:00.600] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
- [ 0.615293 / 01-01 00:00:00.600] rmnet_init: BAM devices[9]
- [ 0.618370 / 01-01 00:00:00.600] PPP generic driver version 2.4.2
- [ 0.618458 / 01-01 00:00:00.610] PPP BSD Compression module registered
- [ 0.618465 / 01-01 00:00:00.610] PPP Deflate Compression module registered
- [ 0.619640 / 01-01 00:00:00.610] PPP MPPE Compression module registered
- [ 0.619650 / 01-01 00:00:00.610] NET: Registered protocol family 24
- [ 0.619708 / 01-01 00:00:00.610] usbcore: registered new interface driver asix
- [ 0.619755 / 01-01 00:00:00.610] usbcore: registered new interface driver cdc_ether
- [ 0.619785 / 01-01 00:00:00.610] usbcore: registered new interface driver net1080
- [ 0.619818 / 01-01 00:00:00.610] usbcore: registered new interface driver cdc_subset
- [ 0.619847 / 01-01 00:00:00.610] usbcore: registered new interface driver zaurus
- [ 0.619916 / 01-01 00:00:00.610] usbcore: registered new interface driver cdc_ncm
- [ 0.648416 / 01-01 00:00:00.640] [anx7808] sp_tx_hardware_powerdown: anx7808 power down
- [ 0.648427 / 01-01 00:00:00.640] [anx7808] sp_tx_set_sys_state : SP_TX To System State:
- [ 0.648435 / 01-01 00:00:00.640] [anx7808] sp_tx_set_sys_state : STATE_CABLE_PLUG
- [ 0.648561 / 01-01 00:00:00.640] msm_hdmi_register_slimport: success
- [ 0.648598 / 01-01 00:00:00.640] i2c-core: driver [anx7808] using legacy suspend method
- [ 0.648605 / 01-01 00:00:00.640] i2c-core: driver [anx7808] using legacy resume method
- [ 0.873487 / 01-01 00:00:00.860] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.874282 / 01-01 00:00:00.860] usbcore: registered new interface driver cdc_acm
- [ 0.874289 / 01-01 00:00:00.860] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
- [ 0.874296 / 01-01 00:00:00.860] Initializing USB Mass Storage driver...
- [ 0.874335 / 01-01 00:00:00.860] usbcore: registered new interface driver usb-storage
- [ 0.874341 / 01-01 00:00:00.860] USB Mass Storage support registered.
- [ 0.874367 / 01-01 00:00:00.860] usbcore: registered new interface driver ums-alauda
- [ 0.874393 / 01-01 00:00:00.860] usbcore: registered new interface driver ums-cypress
- [ 0.874419 / 01-01 00:00:00.860] usbcore: registered new interface driver ums-datafab
- [ 0.874446 / 01-01 00:00:00.860] usbcore: registered new interface driver ums_eneub6250
- [ 0.874475 / 01-01 00:00:00.860] usbcore: registered new interface driver ums-freecom
- [ 0.874501 / 01-01 00:00:00.860] usbcore: registered new interface driver ums-isd200
- [ 0.874528 / 01-01 00:00:00.860] usbcore: registered new interface driver ums-jumpshot
- [ 0.874554 / 01-01 00:00:00.860] usbcore: registered new interface driver ums-karma
- [ 0.874581 / 01-01 00:00:00.860] usbcore: registered new interface driver ums-onetouch
- [ 0.874611 / 01-01 00:00:00.860] usbcore: registered new interface driver ums-sddr09
- [ 0.874638 / 01-01 00:00:00.860] usbcore: registered new interface driver ums-sddr55
- [ 0.874664 / 01-01 00:00:00.860] usbcore: registered new interface driver ums-usbat
- [ 0.874694 / 01-01 00:00:00.860] usbcore: registered new interface driver usb_ehset_test
- [ 0.874701 / 01-01 00:00:00.860] u_lgeusb init
- [ 0.876256 / 01-01 00:00:00.860] gadget: Mass Storage Function, version: 2009/09/11
- [ 0.876264 / 01-01 00:00:00.860] gadget: Number of LUNs=1
- [ 0.876270 / 01-01 00:00:00.860] lun0: LUN: removable file: (no medium)
- [ 0.876379 / 01-01 00:00:00.860] gadget: Mass Storage Function, version: 2009/09/11
- [ 0.876387 / 01-01 00:00:00.860] gadget: Number of LUNs=1
- [ 0.876393 / 01-01 00:00:00.860] clun0: LUN: removable read only CD-ROM file: (no medium)
- [ 0.876619 / 01-01 00:00:00.860] gadget: android_usb ready
- [ 0.876933 / 01-01 00:00:00.860] usbcore: registered new interface driver xpad
- [ 0.876940 / 01-01 00:00:00.860] [Touch D] synaptics_rmi4_init
- [ 0.877630 / 01-01 00:00:00.860] using rtc device, qpnp_rtc, for alarms
- [ 0.877649 / 01-01 00:00:00.860] qcom,qpnp-rtc qpnp-rtc-d8116a00: rtc core: registered qpnp_rtc as rtc0
- [ 0.877770 / 01-01 00:00:00.860] i2c /dev entries driver
- [ 0.877844 / 01-01 00:00:00.860] [Touch] touch power on
- [ 0.878851 / 01-01 00:00:00.870] ocmem: Notifier registered for 1
- [ 0.880814 / 01-01 00:00:00.870] msm_cci_probe: pdev d8122600 device id = -1
- [ 0.884433 / 01-01 00:00:00.870] imx135_init_module E
- [ 0.884440 / 01-01 00:00:00.870] imx135_init_module: Sensor power is set as TMUS/VZW/SPR/DCM Rev.A
- [ 0.884698 / 01-01 00:00:00.870] imx135_platform_probe E
- [ 0.884706 / 01-01 00:00:00.870] msm_sensor_platform_probe: ENTER
- [ 0.884989 / 01-01 00:00:00.870] msm_sensor_power_up:1040 sensor_name imx135
- [ 0.907872 / 01-01 00:00:00.890] msm_sensor_power_up sensor_name imx135 exit
- [ 0.958490 / 01-01 00:00:00.950] input: touch_dev as /devices/virtual/input/input0
- [ 0.958630 / 01-01 00:00:00.950] [Touch] lcd_maker_id = 1, func: touch_probe
- [ 0.958638 / 01-01 00:00:00.950] [Touch] touch_probe : disable_irq !!
- [ 0.962813 / 01-01 00:00:00.950] [Touch] common[0P:0x01] finger[0P:0x12] sensor[3P:0x55] analog[1P:0x54] flash[0P:0x34]
- [ 0.962977 / 01-01 00:00:00.950] [Touch] FW_REVISION_REG = 1
- [ 0.967088 / 01-01 00:00:00.950] [Touch] common[0P:0x01] finger[0P:0x12] sensor[3P:0x55] analog[1P:0x54] flash[0P:0x34]
- [ 0.967250 / 01-01 00:00:00.950] [Touch] CUSTOMER_FAMILY_REG = 1
- [ 0.967256 / 01-01 00:00:00.950] [Touch] panel pattern type : TOUCH_PANEL_H_PATTERN (customer_family == 1)
- [ 0.971396 / 01-01 00:00:00.960] [Touch] common[0P:0x01] finger[0P:0x12] sensor[3P:0x55] analog[1P:0x54] flash[0P:0x34]
- [ 0.973474 / 01-01 00:00:00.960] [Touch] ic_ctrl: IC_CTRL_DOUBLE_TAP_WAKEUP_MODE = 0
- [ 0.974093 / 01-01 00:00:00.960] [Touch D] [synaptics_ts_init 1565] synaptics_ts_suspend lpwg_mode : 0x0, 0x0, 0x0
- [ 0.974101 / 01-01 00:00:00.960] [Touch] ic_ctrl: IC_CTRL_DOUBLE_TAP_WAKEUP_MODE = 0
- [ 0.974944 / 01-01 00:00:00.960] [Touch] Synaptics PLG185 - 1(Interrupt mode): FW ver[E054], force[0]
- [ 0.974952 / 01-01 00:00:00.960] [Touch] irq_pin[1] next_work[0] ghost_stage[0x1]
- [ 0.974960 / 01-01 00:00:00.960] [Touch] touch_probe : enable_irq !!
- [ 0.974966 / 01-01 00:00:00.960] [Touch] lge_get_boot_mode() is not LGE_BOOT_MODE_CHARGERLOGO
- [ 0.974985 / 01-01 00:00:00.960] [Touch] IC identifier[PLG185 - 1] fw_version[E054:E054] : force[0]
- [ 0.974992 / 01-01 00:00:00.960] [Touch] ic E054 img E054
- [ 0.974998 / 01-01 00:00:00.960] [Touch] FW-upgrade is not executed
- [ 0.975040 / 01-01 00:00:00.960] [Touch] Touch driver is initialized
- [ 0.975047 / 01-01 00:00:00.960] [Touch] touch_f54_func is not executed
- [ 0.984145 / 01-01 00:00:00.970] msm_sensor_platform_probe: read eeprom success
- [ 0.984307 / 01-01 00:00:00.970] msm_sensor_power_down:1220 sensor_name imx135
- [ 1.006758 / 01-01 00:00:00.990] msm_sensor_power_down:1292 sensor_name imx135 exit
- [ 1.006766 / 01-01 00:00:00.990] imx135_platform_probe: X, rc = 0
- [ 1.006787 / 01-01 00:00:00.990] imx135_init_module: X, rc = 0
- [ 1.006793 / 01-01 00:00:00.990] imx132_init_module E
- [ 1.007103 / 01-01 00:00:00.990] imx132_platform_probe E
- [ 1.007110 / 01-01 00:00:00.990] msm_sensor_platform_probe: ENTER
- [ 1.007257 / 01-01 00:00:00.990] msm_sensor_power_up:1040 sensor_name imx132
- [ 1.026275 / 01-01 00:00:01.010] msm_sensor_power_up sensor_name imx132 exit
- [ 1.026437 / 01-01 00:00:01.010] msm_sensor_power_down:1220 sensor_name imx132
- [ 1.045993 / 01-01 00:00:01.030] msm_sensor_power_down:1292 sensor_name imx132 exit
- [ 1.046000 / 01-01 00:00:01.030] imx132_platform_probe: X, rc = 0
- [ 1.046020 / 01-01 00:00:01.030] imx132_init_module: X, rc = 0
- [ 1.047005 / 01-01 00:00:01.030] __msm_jpeg_init:946] Jpeg Device id 0
- [ 1.047113 / 01-01 00:00:01.030] __msm_jpeg_init:946] Jpeg Device id 1
- [ 1.047213 / 01-01 00:00:01.030] __msm_jpeg_init:946] Jpeg Device id 2
- [ 1.061663 / 01-01 00:00:01.050] MSM-CPP cpp_init_hardware:790 stream_cnt:0
- [ 1.062724 / 01-01 00:00:01.050] lirc_dev: IR Remote Control driver registered, major 231
- [ 1.062733 / 01-01 00:00:01.050] IR NEC protocol handler initialized
- [ 1.062740 / 01-01 00:00:01.050] IR RC5(x) protocol handler initialized
- [ 1.062746 / 01-01 00:00:01.050] IR RC6 protocol handler initialized
- [ 1.062753 / 01-01 00:00:01.050] IR JVC protocol handler initialized
- [ 1.062759 / 01-01 00:00:01.050] IR Sony protocol handler initialized
- [ 1.062765 / 01-01 00:00:01.050] IR RC5 (streamzap) protocol handler initialized
- [ 1.062772 / 01-01 00:00:01.050] IR SANYO protocol handler initialized
- [ 1.062778 / 01-01 00:00:01.050] IR MCE Keyboard/mouse protocol handler initialized
- [ 1.062785 / 01-01 00:00:01.050] IR LIRC bridge handler initialized
- [ 1.062840 / 01-01 00:00:01.050] usbcore: registered new interface driver uvcvideo
- [ 1.062847 / 01-01 00:00:01.050] USB Video Class driver (1.1.1)
- [ 1.063298 / 01-01 00:00:01.050] [MAX17048] probe : START
- [ 1.063312 / 01-01 00:00:01.050] i2c 1-0036: Driver max17048 requests probe deferral
- [ 1.063332 / 01-01 00:00:01.050] i2c-core: driver [max17048] using legacy suspend method
- [ 1.063339 / 01-01 00:00:01.050] i2c-core: driver [max17048] using legacy resume method
- [ 1.063372 / 01-01 00:00:01.050] bq24192_probe: cable_type is = 8 factory_mode = 0
- [ 1.063458 / 01-01 00:00:01.050] bq24192_set_input_vin_limit: req_vin = 4600 set_vin = 4600 reg_val = 0x48
- [ 1.064292 / 01-01 00:00:01.050] bq24192_set_input_i_limit: input current limit=1500 setting 0x05
- [ 1.065051 / 01-01 00:00:01.050] bq24192_set_system_vmin: req_vmin = 3500 set_vmin = 3500 reg_val = 0x0a
- [ 1.065810 / 01-01 00:00:01.050] bq24192_set_ibat_max: req_ibat = 1408 set_ibat = 1396 reg_val = 0x38
- [ 1.066569 / 01-01 00:00:01.050] bq24192_force_ichg_decrease: enable=0
- [ 1.067327 / 01-01 00:00:01.050] bq24192_set_prechg_i_limit: req_i = 256 set_i = 256 reg_val = 0x10
- [ 1.068098 / 01-01 00:00:01.050] bq24192_set_term_current: req_i = 128 set_i = 128 reg_val = 0x00
- [ 1.068859 / 01-01 00:00:01.060] bq24192_set_vbat_max: req_vbat = 4352 set_vbat = 4352 reg_val = 0xd4
- [ 1.069617 / 01-01 00:00:01.060] bq24192_set_chg_term: enable=1
- [ 1.070373 / 01-01 00:00:01.060] bq24192_set_chg_timer: enable=1
- [ 1.071130 / 01-01 00:00:01.060] bq24192_set_chg_timeout: req_chg_timeout set_h = 8hrs
- [ 1.071888 / 01-01 00:00:01.060] bq24192_set_ir_comp_resister: req_r = 50 set_r = 50 reg_val = 0xa0
- [ 1.072646 / 01-01 00:00:01.060] bq24192_set_vclamp_mv: req_mv = 112 set_mv = 112 reg_val = 0x1c
- [ 1.073940 / 01-01 00:00:01.060] bq24192_get_batt_temp_origin: vadc is not ready yet. report default temperature
- [ 1.074382 / 01-01 00:00:01.060] bq24192_get_batt_temp_origin: vadc is not ready yet. report default temperature
- [ 1.074399 / 01-01 00:00:01.060] bq24192_get_batt_temp_origin: vadc is not ready yet. report default temperature
- [ 1.074872 / 01-01 00:00:01.060] bq24192_get_batt_temp_origin: vadc is not ready yet. report default temperature
- [ 1.075760 / 01-01 00:00:01.060] bq24192_get_batt_temp_origin: vadc is not ready yet. report default temperature
- [ 1.076682 / 01-01 00:00:01.060] bq24192_get_usbin_adc: vadc is not ready yet.
- [ 1.076690 / 01-01 00:00:01.060] bq24192_is_charger_present: DC is present. DC_IN vol=5000000
- [ 1.076727 / 01-01 00:00:01.060] bq24192_enable_charging: enable=1
- [ 1.077087 / 01-01 00:00:01.060] bq24192_get_batt_temp_origin: vadc is not ready yet. report default temperature
- [ 1.077103 / 01-01 00:00:01.060] bq24192_get_batt_temp_origin: vadc is not ready yet. report default temperature
- [ 1.077988 / 01-01 00:00:01.060] bq24192_get_batt_temp_origin: vadc is not ready yet. report default temperature
- [ 1.078371 / 01-01 00:00:01.060] bq24192_probe: probe success
- [ 1.078773 / 01-01 00:00:01.070] bq24192_get_batt_temp_origin: vadc is not ready yet. report default temperature
- [ 1.128052 / 01-01 00:00:01.110] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
- [ 1.128125 / 01-01 00:00:01.110] *[bluesleep(1115)-bluesleep_init()] MSM Sleep Mode Driver Ver 1.1
- [ 1.128158 / 01-01 00:00:01.110] *[bluesleep(914)-bluesleep_probe()]
- [ 1.128165 / 01-01 00:00:01.110] *[bluesleep(862)-bluesleep_populate_dt_pinfo()]
- [ 1.128196 / 01-01 00:00:01.110] *[bluesleep(964)-bluesleep_probe()] host_wake_gpio: 42(0), ext_wake_gpio: 62(0)
- [ 1.128203 / 01-01 00:00:01.110] *[bluesleep(972)-bluesleep_probe()] host_wake_irq: 288
- [ 1.128876 / 01-01 00:00:01.120] cpuidle: using governor ladder
- [ 1.128885 / 01-01 00:00:01.120] cpuidle: using governor menu
- [ 1.128908 / 01-01 00:00:01.120] sdhci: Secure Digital Host Controller Interface driver
- [ 1.128914 / 01-01 00:00:01.120] sdhci: Copyright(c) Pierre Ossman
- [ 1.129297 / 01-01 00:00:01.120] mmc0: SDCC Version: 0x00000038
- [ 1.132315 / 01-01 00:00:01.120] mmc0: bam physical base=0xf9884000
- [ 1.132323 / 01-01 00:00:01.120] mmc0: bam virtual base=0xda3b8000
- [ 1.132333 / 01-01 00:00:01.120] sps:BAM 0xf9884000 is registered.
- [ 1.132340 / 01-01 00:00:01.120] mmc0: BAM device registered. bam_handle=0xd76c6e00
- [ 1.132555 / 01-01 00:00:01.120] sps:BAM 0xf9884000 (va:0xda3b8000) enabled: ver:0x6, number of pipes:6
- [ 1.132815 / 01-01 00:00:01.120] mmc0: Qualcomm MSM SDCC-BAM at [mem 0xf9884000-0xf988afff flags 0x200] [irq 252 flags 0x400]
- [ 1.132840 / 01-01 00:00:01.120] mmc0: Qualcomm MSM SDCC-DML [mem 0xf98a4800-0xf98a48ff flags 0x200]
- [ 1.132880 / 01-01 00:00:01.120] J:msmsdcc_probe-2> plat->nonremovable = 1 bcmdhd_id=2
- [ 1.132888 / 01-01 00:00:01.120] J:sdc2_status> g_wifi_detect = 0
- [ 1.132894 / 01-01 00:00:01.120] sdc2_status_register: Dubugging Point 1
- [ 1.132989 / 01-01 00:00:01.120] [LGE][MMC][mmc_power_off ( )] host->index:0, already power-off, skip below
- [ 1.133006 / 01-01 00:00:01.120] [LGE][MMC][mmc_rescan ( ) START!] 0
- [ 1.133066 / 01-01 00:00:01.120] mmc0: Qualcomm MSM SDCC-core [mem 0xf98a4000-0xf98a47ff flags 0x200] [irq 157 flags 0x400],0 dma -1 dmacrcri -1
- [ 1.133074 / 01-01 00:00:01.120] mmc0: Controller capabilities: 0x00007ffe
- [ 1.133080 / 01-01 00:00:01.120] mmc0: 8 bit data mode disabled
- [ 1.133086 / 01-01 00:00:01.120] mmc0: 4 bit data mode enabled
- [ 1.133092 / 01-01 00:00:01.120] mmc0: polling status mode disabled
- [ 1.133098 / 01-01 00:00:01.120] mmc0: MMC clock 400000 -> 200000000 Hz, PCLK 0 Hz
- [ 1.133104 / 01-01 00:00:01.120] mmc0: Slot eject status = 1
- [ 1.133110 / 01-01 00:00:01.120] mmc0: Power save feature enable = 1
- [ 1.133116 / 01-01 00:00:01.120] mmc0: SPS-BAM data transfer mode available
- [ 1.133363 / 01-01 00:00:01.120] sdhci-pltfm: SDHCI platform and OF driver helper
- [ 1.139366 / 01-01 00:00:01.130] mmc1: no vmmc regulator found
- [ 1.140508 / 01-01 00:00:01.130] [LGE][MMC][mmc_power_off ( )] host->index:1, already power-off, skip below
- [ 1.140524 / 01-01 00:00:01.130] mmc1: SDHCI controller on msm_sdcc.1 [msm_sdcc.1] using ADMA
- [ 1.143541 / 01-01 00:00:01.130] [LP5521] [lp5521_probe] start
- [ 1.143568 / 01-01 00:00:01.130] [LP5521] chip->rgb_led_en ==407
- [ 1.180924 / 01-01 00:00:01.170] lp5521 0-0032: lp5521 programmable led chip found
- [ 1.184144 / 01-01 00:00:01.170] i2c-core: driver [lp5521] using legacy suspend method
- [ 1.184151 / 01-01 00:00:01.170] i2c-core: driver [lp5521] using legacy resume method
- [ 1.184350 / 01-01 00:00:01.170] QCE50: __qce_get_device_tree_data: bam_pipe_pair=0x1
- [ 1.184371 / 01-01 00:00:01.170] QCE50: __qce_get_device_tree_data: ce_phy_reg_base=0xfd440000
- [ 1.184378 / 01-01 00:00:01.170] QCE50: __qce_get_device_tree_data: ce_virt_reg_base=0xda740000
- [ 1.184386 / 01-01 00:00:01.170] QCE50: __qce_get_device_tree_data: ce_bam_phy_reg_base=0xfd444000
- [ 1.184393 / 01-01 00:00:01.170] QCE50: __qce_get_device_tree_data: CRYPTO BAM IRQ = 268.
- [ 1.184526 / 01-01 00:00:01.170] qce qcedev.0: Qualcomm Crypto 5.1.0 device found @0xfd440000
- [ 1.184535 / 01-01 00:00:01.170] qce qcedev.0: IO base, CE = 0xda740000
- [ 1.184538 / 01-01 00:00:01.170] , Consumer (IN) PIPE 2, Producer (OUT) PIPE 3
- [ 1.184541 / 01-01 00:00:01.170] IO base BAM = 0x0
- [ 1.184543 / 01-01 00:00:01.170] BAM IRQ 268
- [ 1.184573 / 01-01 00:00:01.170] sps:BAM 0xfd444000 is registered.
- [ 1.184694 / 01-01 00:00:01.170] sps:BAM 0xfd444000 (va:0xda5f0000) enabled: ver:0x20, number of pipes:8
- [ 1.184858 / 01-01 00:00:01.170] QCE50: qce_sps_init: Qualcomm MSM CE-BAM at 0x00000000fd444000 irq 268
- [ 1.185098 / 01-01 00:00:01.170] Loading kfips
- [ 1.186656 / 01-01 00:00:01.170] usbcore: registered new interface driver usbhid
- [ 1.186663 / 01-01 00:00:01.170] usbhid: USB HID core driver
- [ 1.186901 / 01-01 00:00:01.170] ashmem: initialized
- [ 1.186943 / 01-01 00:00:01.170] logger: created 256K log 'log_main'
- [ 1.186984 / 01-01 00:00:01.170] logger: created 256K log 'log_events'
- [ 1.187028 / 01-01 00:00:01.170] logger: created 256K log 'log_radio'
- [ 1.187069 / 01-01 00:00:01.170] logger: created 256K log 'log_system'
- [ 1.187489 / 01-01 00:00:01.170] sps:BAM 0xf9304000 is registered.
- [ 1.187508 / 01-01 00:00:01.170] sps:BAM 0xf9a44000 is registered.
- [ 1.187517 / 01-01 00:00:01.170] usb_bam_ipa_create_resources: Failed to create USB_PROD resource
- [ 1.187719 / 01-01 00:00:01.170] PMIC@SID0 Power-on reason: Triggered from KPD (power key press) and 'warm' boot
- [ 1.187851 / 01-01 00:00:01.170] input: qpnp_pon as /devices/virtual/input/input1
- [ 1.188167 / 01-01 00:00:01.170] qpnp_coincell_charger_show_state: enabled=Y, voltage=3000 mV, resistance=2100 ohm
- [ 1.188279 / 01-01 00:00:01.170] PMIC@SID4: PM8841 v2.1 options: 0, 0, 2, 2
- [ 1.188357 / 01-01 00:00:01.170] PMIC@SID0: PM8941 v3.1 options: 0, 0, 0, 0
- [ 1.188590 / 01-01 00:00:01.180] usbcore: registered new interface driver snd-usb-audio
- [ 1.194891 / 01-01 00:00:01.180] [LGE][MMC][mmc_rescan ( ) START!] 1
- [ 1.196202 / 01-01 00:00:01.180] msm-compr-dsp msm-compr-dsp: msm_compr_probe: dev name msm-compr-dsp
- [ 1.196630 / 01-01 00:00:01.180] msm-pcm-lpa msm-pcm-lpa: msm_pcm_probe: dev name msm-pcm-lpa
- [ 1.197205 / 01-01 00:00:01.180] platform qcom,msm-voip-dsp.51: Driver msm-voip-dsp requests probe deferral
- [ 1.197497 / 01-01 00:00:01.180] platform qcom,msm-pcm-voice.52: Driver msm-pcm-voice requests probe deferral
- [ 1.199426 / 01-01 00:00:01.190] ocmem: Notifier registered for 5
- [ 1.199904 / 01-01 00:00:01.190] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- [ 1.199975 / 01-01 00:00:01.190] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- [ 1.200755 / 01-01 00:00:01.190] oprofile: using arm/armv7-krait
- [ 1.200802 / 01-01 00:00:01.190] GACT probability on
- [ 1.200815 / 01-01 00:00:01.190] Mirror/redirect action on
- [ 1.200822 / 01-01 00:00:01.190] Simple TC action Loaded
- [ 1.201041 / 01-01 00:00:01.190] netem: version 1.3
- [ 1.201050 / 01-01 00:00:01.190] u32 classifier
- [ 1.201056 / 01-01 00:00:01.190] input device check on
- [ 1.201061 / 01-01 00:00:01.190] Actions configured
- [ 1.201071 / 01-01 00:00:01.190] Netfilter messages via NETLINK v0.30.
- [ 1.201109 / 01-01 00:00:01.190] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
- [ 1.201360 / 01-01 00:00:01.190] ctnetlink v0.93: registering with nfnetlink.
- [ 1.201396 / 01-01 00:00:01.190] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
- [ 1.201403 / 01-01 00:00:01.190] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
- [ 1.201532 / 01-01 00:00:01.190] xt_time: kernel timezone is -0000
- [ 1.201683 / 01-01 00:00:01.190] ip_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.201770 / 01-01 00:00:01.190] arp_tables: (C) 2002 David S. Miller
- [ 1.201799 / 01-01 00:00:01.190] TCP: bic registered
- [ 1.201806 / 01-01 00:00:01.190] TCP: cubic registered
- [ 1.201811 / 01-01 00:00:01.190] Initializing XFRM netlink socket
- [ 1.202059 / 01-01 00:00:01.190] NET: Registered protocol family 10
- [ 1.203118 / 01-01 00:00:01.190] Mobile IPv6
- [ 1.203139 / 01-01 00:00:01.190] ip6_tables: (C) 2000-2006 Netfilter Core Team
- [ 1.203211 / 01-01 00:00:01.190] IPv6 over IPv4 tunneling driver
- [ 1.203437 / 01-01 00:00:01.190] NET: Registered protocol family 17
- [ 1.203458 / 01-01 00:00:01.190] NET: Registered protocol family 15
- [ 1.203493 / 01-01 00:00:01.190] Bridge firewalling registered
- [ 1.203506 / 01-01 00:00:01.190] Ebtables v2.0 registered
- [ 1.203640 / 01-01 00:00:01.190] Bluetooth: RFCOMM TTY layer initialized
- [ 1.203659 / 01-01 00:00:01.190] Bluetooth: RFCOMM socket layer initialized
- [ 1.203666 / 01-01 00:00:01.190] Bluetooth: RFCOMM ver 1.11
- [ 1.203673 / 01-01 00:00:01.190] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 1.203678 / 01-01 00:00:01.190] Bluetooth: BNEP filters: protocol multicast
- [ 1.203685 / 01-01 00:00:01.190] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 1.203736 / 01-01 00:00:01.190] L2TP core driver, V2.0
- [ 1.203750 / 01-01 00:00:01.190] PPPoL2TP kernel driver, V2.0
- [ 1.204226 / 01-01 00:00:01.190] Registering SWP/SWPB emulation handler
- [ 1.211680 / 01-01 00:00:01.200] lge_boost_gpio_probe
- [ 1.212133 / 01-01 00:00:01.200] ethernet_phy: disabling
- [ 1.212145 / 01-01 00:00:01.200] gdsc_oxili_gx: disabling
- [ 1.212162 / 01-01 00:00:01.200] gdsc_venus: disabling
- [ 1.212455 / 01-01 00:00:01.200] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
- [ 1.212627 / 01-01 00:00:01.200] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- [ 1.212720 / 01-01 00:00:01.200] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- [ 1.212926 / 01-01 00:00:01.200] wifi_set_power = 1
- [ 1.212934 / 01-01 00:00:01.200] bcm_wifi_reinit_gpio: rev=10, gpio_power=26, gpio_hostwakeup=44
- [ 1.213188 / 01-01 00:00:01.200] [MAX17048] probe : START
- [ 1.213206 / 01-01 00:00:01.200] max17048_parse_dt : Get alert_gpio 9
- [ 1.213218 / 01-01 00:00:01.200] [MAX17048] platform data : max17048,rcomp = 57, max17048,temp_co_hot = 375, max17048,temp_co_cold = 5000, max17048,alert_threshold = 0x2, max17048,full_design = 3500
- [ 1.213784 / 01-01 00:00:01.200] max17048 1-0036: MAX17048 Fuel-Gauge Ver 0x12
- [ 1.214475 / 01-01 00:00:01.200] max17048_get_status : status = 0x20ff
- [ 1.215454 / 01-01 00:00:01.200] max17048_get_config : config = 0x327e
- [ 1.220365 / 01-01 00:00:01.210] max17048_set_rcomp_by_temperature : temp =39, PreviousRcomp =0x32 -> newRcomp = 0x32
- [ 1.220374 / 01-01 00:00:01.210] max17048_set_athd_alert.
- [ 1.220381 / 01-01 00:00:01.210] max17048_set_alsc_alert. with 1
- [ 1.220935 / 01-01 00:00:01.210] max17048_get_config : config = 0x327e
- [ 1.221478 / 01-01 00:00:01.210] max17048_get_status : status = 0x20ff
- [ 1.222556 / 01-01 00:00:01.210] max17048_work : Raw SOC : 0x7ec4 / vcell : 0xc1f
- [ 1.222568 / 01-01 00:00:01.210] max17048_work : Reported Capacity : 68 / voltage : 3878
- [ 1.222595 / 01-01 00:00:01.210] max17048_clear_interrupt.
- [ 1.222950 / 01-01 00:00:01.210] bcm_wifi_set_power: trying to acquire BT lock
- [ 1.222958 / 01-01 00:00:01.210] ####btlock acquired cookie: WiFi
- [ 1.222965 / 01-01 00:00:01.210] bcm_wifi_set_power: btlock acquired
- [ 1.224041 / 01-01 00:00:01.210] [MAX17048] probe : DONE
- [ 1.224279 / 01-01 00:00:01.210] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- [ 1.224416 / 01-01 00:00:01.210] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- [ 1.224580 / 01-01 00:00:01.210] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
- [ 1.349380 / 01-01 00:00:01.340] mmc1: BKOPS_EN bit = 1
- [ 1.352766 / 01-01 00:00:01.340] lge_pm_get_cable_info: acc_read_value - 1786887
- [ 1.352775 / 01-01 00:00:01.340]
- [ 1.352779 / 01-01 00:00:01.340]
- [ 1.352782 / 01-01 00:00:01.340] [PM]Cable detected: 1786887(OPEN)(1600, 500)
- [ 1.352785 / 01-01 00:00:01.340]
- [ 1.352901 / 01-01 00:00:01.340] msm-dwc3 msm_dwc3: chg_type = USB_SDP_CHARGER
- [ 1.358413 / 01-01 00:00:01.350] dwc3 f9200000.dwc3: Avail curr from USB = 500
- [ 1.358420 / 01-01 00:00:01.350] msm_otg_notify_power_supply: power_supply_get_by_name(usb)
- [ 1.358446 / 01-01 00:00:01.350] [Touch] trigger_baseline_state_machine = 1 type = 0
- [ 1.358454 / 01-01 00:00:01.350] [Touch] USB IN!!!!!!!!!!!!!!!!
- [ 1.364378 / 01-01 00:00:01.350] bq24192_is_charger_present: DC is present. DC_IN vol=4590440
- [ 1.364388 / 01-01 00:00:01.350] bq24192_set_input_i_limit: input current limit=500 setting 0x02
- [ 1.364794 / 01-01 00:00:01.350] mmc1: new HS200 MMC card at address 0001
- [ 1.364802 / 01-01 00:00:01.350] [LGE][MMC][mmc_add_card ( )] mmc_hostname:mmc1, type:MMC
- [ 1.364966 / 01-01 00:00:01.350] ------------[ cut here ]------------
- [ 1.364981 / 01-01 00:00:01.350] WARNING: at ../../../../../../kernel/lge/kk_zee/mm/page_alloc.c:1580 get_page_from_freelist+0x65c/0x69c()
- [ 1.364990 / 01-01 00:00:01.350] Modules linked in:
- [ 1.365013 / 01-01 00:00:01.350] [<c010d3e8>] (unwind_backtrace+0x0/0x138) from [<c01a0f58>] (warn_slowpath_common+0x4c/0x64)
- [ 1.365027 / 01-01 00:00:01.350] [<c01a0f58>] (warn_slowpath_common+0x4c/0x64) from [<c01a0f8c>] (warn_slowpath_null+0x1c/0x24)
- [ 1.365040 / 01-01 00:00:01.350] [<c01a0f8c>] (warn_slowpath_null+0x1c/0x24) from [<c02367f4>] (get_page_from_freelist+0x65c/0x69c)
- [ 1.365053 / 01-01 00:00:01.350] [<c02367f4>] (get_page_from_freelist+0x65c/0x69c) from [<c02374cc>] (__alloc_pages_nodemask+0x15c/0x8d0)
- [ 1.365066 / 01-01 00:00:01.350] [<c02374cc>] (__alloc_pages_nodemask+0x15c/0x8d0) from [<c0237ca4>] (__get_free_pages+0x10/0x24)
- [ 1.365080 / 01-01 00:00:01.350] [<c0237ca4>] (__get_free_pages+0x10/0x24) from [<c0266b70>] (kmalloc_order_trace+0x24/0xc0)
- [ 1.365094 / 01-01 00:00:01.350] [<c0266b70>] (kmalloc_order_trace+0x24/0xc0) from [<c06e1a08>] (mmc_alloc_sg+0x18/0x40)
- [ 1.365106 / 01-01 00:00:01.350] [<c06e1a08>] (mmc_alloc_sg+0x18/0x40) from [<c06e1f8c>] (mmc_init_queue+0x23c/0x384)
- [ 1.365121 / 01-01 00:00:01.350] [<c06e1f8c>] (mmc_init_queue+0x23c/0x384) from [<c06dd9ec>] (mmc_blk_alloc_req+0x128/0x3cc)
- [ 1.365133 / 01-01 00:00:01.350] [<c06dd9ec>] (mmc_blk_alloc_req+0x128/0x3cc) from [<c06dfbe4>] (mmc_blk_probe+0x7c/0x2ec)
- [ 1.365147 / 01-01 00:00:01.350] [<c06dfbe4>] (mmc_blk_probe+0x7c/0x2ec) from [<c06d0470>] (mmc_bus_probe+0x14/0x18)
- [ 1.365154 / 01-01 00:00:01.350] bq24192_set_ibat_max: req_ibat = 1408 set_ibat = 1396 reg_val = 0x38
- [ 1.365183 / 01-01 00:00:01.350] [<c06d0470>] (mmc_bus_probe+0x14/0x18) from [<c047b5d4>] (driver_probe_device+0xac/0x364)
- [ 1.365198 / 01-01 00:00:01.350] [<c047b5d4>] (driver_probe_device+0xac/0x364) from [<c0479a44>] (bus_for_each_drv+0x44/0x8c)
- [ 1.365211 / 01-01 00:00:01.350] [<c0479a44>] (bus_for_each_drv+0x44/0x8c) from [<c047b4bc>] (device_attach+0x88/0xa0)
- [ 1.365223 / 01-01 00:00:01.350] [<c047b4bc>] (device_attach+0x88/0xa0) from [<c047a9bc>] (bus_probe_device+0x84/0xa8)
- [ 1.365236 / 01-01 00:00:01.350] [<c047a9bc>] (bus_probe_device+0x84/0xa8) from [<c04790a0>] (device_add+0x4e0/0x5e0)
- [ 1.365247 / 01-01 00:00:01.350] [<c04790a0>] (device_add+0x4e0/0x5e0) from [<c06d0ad4>] (mmc_add_card+0x130/0x354)
- [ 1.365259 / 01-01 00:00:01.350] [<c06d0ad4>] (mmc_add_card+0x130/0x354) from [<c06d427c>] (mmc_attach_mmc+0xcc/0x1e0)
- [ 1.365272 / 01-01 00:00:01.350] [<c06d427c>] (mmc_attach_mmc+0xcc/0x1e0) from [<c06cf7c8>] (mmc_rescan+0x29c/0x2f0)
- [ 1.365287 / 01-01 00:00:01.350] [<c06cf7c8>] (mmc_rescan+0x29c/0x2f0) from [<c01b9f1c>] (process_one_work+0x128/0x490)
- [ 1.365301 / 01-01 00:00:01.350] [<c01b9f1c>] (process_one_work+0x128/0x490) from [<c01ba5c8>] (worker_thread+0x164/0x35c)
- [ 1.365314 / 01-01 00:00:01.350] [<c01ba5c8>] (worker_thread+0x164/0x35c) from [<c01bf344>] (kthread+0x88/0x94)
- [ 1.365329 / 01-01 00:00:01.350] [<c01bf344>] (kthread+0x88/0x94) from [<c0107a04>] (kernel_thread_exit+0x0/0x8)
- [ 1.365338 / 01-01 00:00:01.350] ---[ end trace 2117905fd58a1746 ]---
- [ 1.365432 / 01-01 00:00:01.350] mmcblk0: mmc1:0001 032GE4 29.1 GiB
- [ 1.365547 / 01-01 00:00:01.350] mmcblk0rpmb: mmc1:0001 032GE4 partition 3 4.00 MiB
- [ 1.365900 / 01-01 00:00:01.350] bq24192_batt_external_power_changed: usb is online! i_limt = 500
- [ 1.367217 / 01-01 00:00:01.350] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 p22 p23 p24 p25 p26 p27 p28 p29 p30 p31 p32 p33 p34 p35 p36 p37 p38 p39
- [ 1.369931 / 01-01 00:00:01.360] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
- [ 1.370201 / 01-01 00:00:01.360] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- [ 1.370354 / 01-01 00:00:01.360] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- [ 1.370412 / 01-01 00:00:01.360] [LGE][MMC][mmc_add_card ( )] device_add & uevent posting complete!
- [ 1.396396 / 01-01 00:00:01.380] J:bcm_wifi_set_power: applied delay. 150ms
- [ 1.396404 / 01-01 00:00:01.380] bcm_wifi_set_power: wifi power successed to pull up
- [ 1.396411 / 01-01 00:00:01.380] ####btlock released, cookie: WiFi
- [ 1.396418 / 01-01 00:00:01.380] wifi_set_carddetect = 1
- [ 1.396425 / 01-01 00:00:01.380] J:sdc2_status> g_wifi_detect = 1
- [ 1.396432 / 01-01 00:00:01.380] [LGE][MMC][msmsdcc_check_status( )] NOW==>(1), OLD==>(host->oldstat:0, host->eject:1)
- [ 1.396440 / 01-01 00:00:01.380] mmc0: Slot status change detected (0 -> 1)
- [ 1.396704 / 01-01 00:00:01.380] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- [ 1.396845 / 01-01 00:00:01.380] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- [ 1.397016 / 01-01 00:00:01.380] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
- [ 1.412066 / 01-01 00:00:01.400] [LGE][MMC][mmc_rescan ( ) START!] 0
- [ 1.490638 / 01-01 00:00:01.480] mmc0: queuing unknown CIS tuple 0x80 (2 bytes)
- [ 1.493348 / 01-01 00:00:01.480] mmc0: queuing unknown CIS tuple 0x80 (7 bytes)
- [ 1.494855 / 01-01 00:00:01.480] mmc0: queuing unknown CIS tuple 0x80 (3 bytes)
- [ 1.552062 / 01-01 00:00:01.540] sps:BAM 0xf9884000 (va:0xda3b8000) enabled: ver:0x6, number of pipes:6
- [ 1.552262 / 01-01 00:00:01.540] sps:BAM 0xf9884000 (va:0xda3b8000) enabled: ver:0x6, number of pipes:6
- [ 1.552429 / 01-01 00:00:01.540] sps:BAM 0xf9884000 (va:0xda3b8000) enabled: ver:0x6, number of pipes:6
- [ 1.556070 / 01-01 00:00:01.540] mmc0: queuing unknown CIS tuple 0x91 (3 bytes)
- [ 1.556104 / 01-01 00:00:01.540] mmc0: new ultra high speed SDR104 SDIO card at address 0001
- [ 1.556112 / 01-01 00:00:01.540] [LGE][MMC][mmc_add_card ( )] mmc_hostname:mmc0, type:SDIO
- [ 1.556188 / 01-01 00:00:01.540] [LGE][MMC][mmc_add_card ( )] device_add & uevent posting complete!
- [ 1.556484 / 01-01 00:00:01.540] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
- [ 1.556731 / 01-01 00:00:01.540] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- [ 1.556873 / 01-01 00:00:01.540] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- [ 1.572604 / 01-01 00:00:01.560] alloc static buf at d82c0000!
- [ 1.572801 / 01-01 00:00:01.560] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- [ 1.572954 / 01-01 00:00:01.560] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- [ 1.573137 / 01-01 00:00:01.560] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
- [ 1.577791 / 01-01 00:00:01.560] F1 signature OK, socitype:0x1 chip:0x4335 rev:0x1 pkg:0x0
- [ 1.578569 / 01-01 00:00:01.570] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
- [ 1.578660 / 01-01 00:00:01.570] can't alloc section 7
- [ 1.578916 / 01-01 00:00:01.570] wl_create_event_handler(): thread:wl_event_handler:a8 started
- [ 1.578922 / 01-01 00:00:01.570] CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xd774f640
- [ 1.579331 / 01-01 00:00:01.570] p2p0: P2P Interface Registered
- [ 1.579389 / 01-01 00:00:01.570] dhd_attach(): thread:dhd_watchdog_thread:a9 started
- [ 1.579444 / 01-01 00:00:01.570] dhd_attach(): thread:dhd_dpc:aa started
- [ 1.579530 / 01-01 00:00:01.570] dhd_attach(): thread:dhd_rxf:ab started
- [ 1.579586 / 01-01 00:00:01.570] dhd_attach(): thread:dhd_sysioc:ac started
- [ 1.580112 / 01-01 00:00:01.570] Broadcom Dongle Host Driver: register interface [wlan0] MAC: 00:90:4c:1f:c3:9a
- [ 1.580142 / 01-01 00:00:01.570]
- [ 1.580145 / 01-01 00:00:01.570] Dongle Host Driver, version 1.88.60.1 (r)
- [ 1.580148 / 01-01 00:00:01.570] Compiled in drivers/net/wireless/bcmdhd/src on Jun 1 2014 at 13:01:18
- [ 1.580157 / 01-01 00:00:01.570] wifi_set_power = 0
- [ 1.580163 / 01-01 00:00:01.570] bcm_wifi_set_power: trying to acquire BT lock
- [ 1.580170 / 01-01 00:00:01.570] ####btlock acquired cookie: WiFi
- [ 1.580175 / 01-01 00:00:01.570] bcm_wifi_set_power: btlock acquired
- [ 1.580184 / 01-01 00:00:01.570] bcm_wifi_set_power: wifi power successed to pull down
- [ 1.580191 / 01-01 00:00:01.570] ####btlock released, cookie: WiFi
- [ 1.580197 / 01-01 00:00:01.570] =========== WLAN placed in RESET ========
- [ 1.580310 / 01-01 00:00:01.570] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
- [ 1.580571 / 01-01 00:00:01.570] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- [ 1.580742 / 01-01 00:00:01.570] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- [ 1.580830 / 01-01 00:00:01.570] input: gpio-keys as /devices/gpio_keys.84/input/input2
- [ 1.581215 / 01-28 08:52:34.500] qcom,qpnp-rtc qpnp-rtc-d8116a00: setting system clock to 1970-01-28 08:52:34 UTC (2364754)
- [ 1.581221 / 01-28 08:52:34.500] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- [ 1.581353 / 01-28 08:52:34.500] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- [ 1.581528 / 01-28 08:52:34.500] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
- [ 1.581874 / 01-28 08:52:34.500] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- [ 1.581932 / 01-28 08:52:34.500] clock_late_init: Removing enables held for handed-off clocks
- [ 1.582013 / 01-28 08:52:34.500] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- [ 1.586980 / 01-28 08:52:34.500] HSD.max1462x[lge_hsd_init : 976]enter
- [ 1.587051 / 01-28 08:52:34.500] HSD.max1462x[lge_hsd_init : 983]wake_lock_init
- [ 1.587253 / 01-28 08:52:34.500] HSD.max1462x[lge_hsd_probe : 676]lge_hsd_probe
- [ 1.587316 / 01-28 08:52:34.500] HSD.max1462x[lge_hsd_probe : 741]gpio_get_value_cansleep(hi->gpio_mic_en) = 0
- [ 1.587374 / 01-28 08:52:34.500] HSD.max1462x[lge_hsd_probe : 773]hi->irq_key = 311
- [ 1.587486 / 01-28 08:52:34.500] ------------[ cut here ]------------
- [ 1.587499 / 01-28 08:52:34.500] WARNING: at ../../../../../../kernel/lge/kk_zee/kernel/irq/manage.c:428 enable_irq+0x3c/0x74()
- [ 1.587506 / 01-28 08:52:34.500] Unbalanced enable for IRQ 311
- [ 1.587512 / 01-28 08:52:34.500] Modules linked in:
- [ 1.587532 / 01-28 08:52:34.500] [<c010d3e8>] (unwind_backtrace+0x0/0x138) from [<c01a0f58>] (warn_slowpath_common+0x4c/0x64)
- [ 1.587545 / 01-28 08:52:34.500] [<c01a0f58>] (warn_slowpath_common+0x4c/0x64) from [<c01a1004>] (warn_slowpath_fmt+0x30/0x40)
- [ 1.587557 / 01-28 08:52:34.500] [<c01a1004>] (warn_slowpath_fmt+0x30/0x40) from [<c0206948>] (enable_irq+0x3c/0x74)
- [ 1.587571 / 01-28 08:52:34.500] [<c0206948>] (enable_irq+0x3c/0x74) from [<c07054f4>] (lge_hsd_probe+0x2d8/0x7bc)
- [ 1.587584 / 01-28 08:52:34.500] [<c07054f4>] (lge_hsd_probe+0x2d8/0x7bc) from [<c047ca60>] (platform_drv_probe+0x14/0x18)
- [ 1.587599 / 01-28 08:52:34.500] [<c047ca60>] (platform_drv_probe+0x14/0x18) from [<c047b5d4>] (driver_probe_device+0xac/0x364)
- [ 1.587611 / 01-28 08:52:34.500] [<c047b5d4>] (driver_probe_device+0xac/0x364) from [<c047b918>] (__driver_attach+0x8c/0x90)
- [ 1.587623 / 01-28 08:52:34.500] [<c047b918>] (__driver_attach+0x8c/0x90) from [<c0479ad8>] (bus_for_each_dev+0x4c/0x80)
- [ 1.587636 / 01-28 08:52:34.500] [<c0479ad8>] (bus_for_each_dev+0x4c/0x80) from [<c047abf4>] (bus_add_driver+0xf0/0x280)
- [ 1.587648 / 01-28 08:52:34.500] [<c047abf4>] (bus_add_driver+0xf0/0x280) from [<c047bdf4>] (driver_register+0x78/0x138)
- [ 1.587662 / 01-28 08:52:34.500] [<c047bdf4>] (driver_register+0x78/0x138) from [<c0f2c3cc>] (lge_hsd_init+0x74/0xbc)
- [ 1.587674 / 01-28 08:52:34.500] [<c0f2c3cc>] (lge_hsd_init+0x74/0xbc) from [<c01006e8>] (do_one_initcall+0x10c/0x170)
- [ 1.587687 / 01-28 08:52:34.500] [<c01006e8>] (do_one_initcall+0x10c/0x170) from [<c0f00c50>] (kernel_init+0xf0/0x200)
- [ 1.587700 / 01-28 08:52:34.500] [<c0f00c50>] (kernel_init+0xf0/0x200) from [<c0107a04>] (kernel_thread_exit+0x0/0x8)
- [ 1.587708 / 01-28 08:52:34.500] ---[ end trace 2117905fd58a1747 ]---
- [ 1.587724 / 01-28 08:52:34.500] HSD.max1462x[lge_hsd_probe : 797]hi->irq_detect = 310
- [ 1.592262 / 01-28 08:52:34.500] lge_hsd_probe: acc_read_value - 14670
- [ 1.592349 / 01-28 08:52:34.500] input: hs_detect as /devices/virtual/input/input3
- [ 1.592659 / 01-28 08:52:34.500] msm8974-asoc-taiko fe02b000.sound: msm8974_asoc_machine_probe(): hdmi audio support present
- [ 1.592798 / 01-28 08:52:34.500] platform fe02b000.sound: Driver msm8974-asoc-taiko requests probe deferral
- [ 1.592962 / 01-28 08:52:34.500] platform fe12f000.slim: Driver ngd_msm_ctrl requests probe deferral
- [ 1.593120 / 01-28 08:52:34.500] ALSA device list:
- [ 1.593127 / 01-28 08:52:34.500] No soundcards found.
- [ 1.593269 / 01-28 08:52:34.500] [BOOT_CAUSE] 128
- [ 1.593293 / 01-28 08:52:34.500] [SMPL_CNT] ===> write() : fd is 3
- [ 1.593318 / 01-28 08:52:34.500] [SMPL_CNT] ===> not smpl boot!!!!!
- [ 1.593386 / 01-28 08:52:34.500] Freeing init memory: 192K
- [ 1.613140 / 01-28 08:52:34.520] type=1403 audit(2364754.520:2): policy loaded auid=4294967295 ses=4294967295
- [ 1.613247 / 01-28 08:52:34.520] SELinux: Loaded policy from /sepolicy
- [ 1.614833 / 01-28 08:52:34.520] SELinux: Loaded file_contexts from /file_contexts
- [ 2.358846 / 01-28 08:52:35.270] [Touch E] [synaptics_ts_get_data 579] Ignore interrupt. interrupt status reg = 0x0
- [ 2.358858 / 01-28 08:52:35.270] [Touch E] [touch_work_pre_proc 2307] get data fail -100
- [ 2.812283 / 01-28 08:52:35.720] init: could not import file '/init.recovery.z.rc' from '/init.rc'
- [ 2.814631 / 01-28 08:52:35.720] healthd: wakealarm_init: timerfd_create failed
- [ 2.814856 / 01-28 08:52:35.720] init: invalid uid 'fm_radio'
- [ 2.814970 / 01-28 08:52:35.720] init: invalid uid 'fm_radio'
- [ 2.815026 / 01-28 08:52:35.720] init: invalid uid 'nfclock'
- [ 3.008408 / 01-28 08:52:35.920] earjack debugger is detected on VU3 but do not allow to use it!
- [ 3.026527 / 01-28 08:52:35.930] init: cannot open '/initlogo.rle'
- [ 3.028089 / 01-28 08:52:35.930] android_usb android0: gadget enable(0)
- [ 3.028099 / 01-28 08:52:35.930] android_usb: already disabled
- [ 3.028234 / 01-28 08:52:35.930] android_usb android0: request function list: adb
- [ 3.028244 / 01-28 08:52:35.930] func:adb is enabled.
- [ 3.028837 / 01-28 08:52:35.940] init: Unable to open persistent property directory /data/property errno: 2
- [ 3.030468 / 01-28 08:52:35.940] healthd: wakealarm_init: timerfd_create failed
- [ 3.032044 / 01-28 08:52:35.940] mdss_fb_open: fb ref_cnt is 0
- [ 3.032108 / 01-28 08:52:35.940] mdss_fb_blank_sub: UNBLANK
- [ 3.035698 / 01-28 08:52:35.940] mdss_fb_blank_sub: BLANK
- [ 3.045051 / 01-28 08:52:35.950] mdss_dsi_isr: isr=1030000 1000000
- [ 3.045064 / 01-28 08:52:35.950] mdss_dsi_fifo_status: status=55551000
- [ 3.069274 / 01-28 08:52:35.980] bq24192_irq_worker: 08:0x6C, 09:0x00
- [ 3.069279 / 01-28 08:52:35.980] bq24192_irq_worker: usb host detected!
- [ 3.069284 / 01-28 08:52:35.980] bq24192_irq_worker: fast charging!
- [ 3.069288 / 01-28 08:52:35.980] bq24192_irq_worker: dpm detected!
- [ 3.069291 / 01-28 08:52:35.980] bq24192_irq_worker: power good!
- [ 3.078501 / 01-28 08:52:35.990] bq24192_is_charger_present: DC is present. DC_IN vol=4551340
- [ 3.083321 / 01-28 08:52:35.990] bq24192_is_charger_present: DC is present. DC_IN vol=4551340
- [ 3.083328 / 01-28 08:52:35.990] bq24192_set_input_i_limit: input current limit=500 setting 0x02
- [ 3.084086 / 01-28 08:52:35.990] bq24192_set_ibat_max: req_ibat = 1408 set_ibat = 1396 reg_val = 0x38
- [ 3.084855 / 01-28 08:52:35.990] bq24192_batt_external_power_changed: usb is online! i_limt = 500
- [ 3.155744 / 01-28 08:52:36.060] EXT4-fs (mmcblk0p38): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,errors=continue
- [ 3.168692 / 01-28 08:52:36.080] android_usb android0: gadget enable(0)
- [ 3.168982 / 01-28 08:52:36.080] android_usb android0: gadget enable(1)
- [ 3.169985 / 01-28 08:52:36.080] adb_open
- [ 3.248408 / 01-28 08:52:36.159] mdss_dsi_cmds2buf_tx: failed to call cmd_dma_tx for cmd = 0xb6
- [ 3.248414 / 01-28 08:52:36.159] mdss_dsi_cmds_tx: failed to call
- [ 3.248425 / 01-28 08:52:36.159] [Zee][OLED] mdss_dsi_panel_bklt_dcs: level=0, blmap=0, blackout=true
- [ 3.269463 / 01-28 08:52:36.180] android_work: did not send uevent (0 0 (null))
- [ 3.444699 / 01-28 08:52:36.360] android_work: did not send uevent (0 0 (null))
- [ 3.458400 / 01-28 08:52:36.370] mdss_dsi_cmds2buf_tx: failed to call cmd_dma_tx for cmd = 0x51
- [ 3.458405 / 01-28 08:52:36.370] mdss_dsi_cmds_tx: failed to call
- [ 3.458449 / 01-28 08:52:36.370] mdss_fb_blank_sub: UNBLANK
- [ 3.500838 / 01-28 08:52:36.410] android_work: sent uevent USB_STATE=CONNECTED
- [ 3.504452 / 01-28 08:52:36.410] android_work: sent uevent USB_STATE=DISCONNECTED
- [ 3.567650 / 01-28 08:52:36.470] mdss_mdp_overlay_start: starting fb0 overlay
- [ 3.569961 / 01-28 08:52:36.480] mdss_mdp_ctl_start_sub: ctl_num=0
- [ 3.570866 / 01-28 08:52:36.480] [Touch] lcd_notifier_callback: event = 1
- [ 3.570873 / 01-28 08:52:36.480] [Touch] touch_resume
- [ 3.570878 / 01-28 08:52:36.480] mdss_dsi_on:573 Panel already on.
- [ 3.570887 / 01-28 08:52:36.480] mdss_dsi_unblank+:
- [ 3.579873 / 01-28 08:52:36.490] [Touch] lcd_notifier_callback: event = 2
- [ 3.629822 / 01-28 08:52:36.539] [Zee][OLED] mdss_dsi_panel_bklt_dcs: level=255, blmap=255, blackout=false
- [ 3.632735 / 01-28 08:52:36.539] android_work: sent uevent USB_STATE=CONNECTED
- [ 3.634050 / 01-28 08:52:36.539] android_usb gadget: high-speed config #1: fe8050c8.android_usb
- [ 3.688464 / 01-28 08:52:36.600] android_work: sent uevent USB_STATE=CONFIGURED
- [ 3.688475 / 01-28 08:52:36.600] [cable info] boot_mode:0, dlcomplete:0
- [ 3.760857 / 01-28 08:52:36.670] EXT4-fs (mmcblk0p35): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,errors=continue
- [ 6.368408 / 01-28 08:52:39.279] dwc3_ta_detect_work: ta detection work
- [ 10.068426 / 01-28 08:52:42.979] pet_watchdog
- [ 10.072825 / 01-28 08:52:42.979] [XO_THERM] Result:43 Raw:30323
- [ 11.378407 / 01-28 08:52:44.289] dwc3_ta_detect_work: ta detection first retry
- [ 20.068423 / 01-28 08:52:52.979] pet_watchdog
- [ 20.072814 / 01-28 08:52:52.979] [XO_THERM] Result:43 Raw:30355
- [ 21.137629 / 01-28 08:52:54.039] bq24192_is_charger_present: DC is present. DC_IN vol=4551340
- [ 21.137637 / 01-28 08:52:54.039] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 21.137646 / 01-28 08:52:54.039] LGE charging scenario : state 0 -> 0(0-1), temp=39, volt=3878, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 21.142468 / 01-28 08:52:54.049] bq24192_is_charger_present: DC is present. DC_IN vol=4553280
- [ 21.142477 / 01-28 08:52:54.049] bq24192_set_adjust_ibat: thermal-engine set_ibat = 0 force_ichg_20pct = 0
- [ 21.147814 / 01-28 08:52:54.049] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 21.408395 / 01-28 08:52:54.319] dwc3_ta_detect_work: ta detection second retry
- [ 21.408405 / 01-28 08:52:54.319] dwc3_ta_detect_work: ta detection done
- [ 30.068429 / 01-28 08:53:02.979] pet_watchdog
- [ 30.072819 / 01-28 08:53:02.979] [XO_THERM] Result:42 Raw:30382
- [ 40.068422 / 01-28 08:53:12.979] pet_watchdog
- [ 40.072813 / 01-28 08:53:12.979] [XO_THERM] Result:42 Raw:30401
- [ 50.068422 / 01-28 08:53:22.979] pet_watchdog
- [ 50.072812 / 01-28 08:53:22.979] [XO_THERM] Result:42 Raw:30414
- [ 60.068427 / 01-28 08:53:32.979] pet_watchdog
- [ 60.072816 / 01-28 08:53:32.979] [XO_THERM] Result:42 Raw:30427
- [ 70.068422 / 01-28 08:53:42.979] pet_watchdog
- [ 70.072812 / 01-28 08:53:42.979] [XO_THERM] Result:42 Raw:30437
- [ 80.068422 / 01-28 08:53:52.979] pet_watchdog
- [ 80.072812 / 01-28 08:53:52.979] [XO_THERM] Result:42 Raw:30445
- [ 81.297613 / 01-28 08:53:54.199] bq24192_is_charger_present: DC is present. DC_IN vol=4553280
- [ 81.297621 / 01-28 08:53:54.199] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 81.297629 / 01-28 08:53:54.199] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3878, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 81.302342 / 01-28 08:53:54.209] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 90.068426 / 01-28 08:54:02.979] pet_watchdog
- [ 90.072816 / 01-28 08:54:02.979] [XO_THERM] Result:42 Raw:30452
- [ 100.068422 / 01-28 08:54:12.979] pet_watchdog
- [ 100.072812 / 01-28 08:54:12.979] [XO_THERM] Result:42 Raw:30458
- [ 110.068422 / 01-28 08:54:22.979] pet_watchdog
- [ 110.072812 / 01-28 08:54:22.979] [XO_THERM] Result:42 Raw:30462
- [ 120.068427 / 01-28 08:54:32.979] pet_watchdog
- [ 120.072817 / 01-28 08:54:32.979] [XO_THERM] Result:42 Raw:30466
- [ 130.068422 / 01-28 08:54:42.979] pet_watchdog
- [ 130.072812 / 01-28 08:54:42.979] [XO_THERM] Result:42 Raw:30470
- [ 140.068422 / 01-28 08:54:52.979] pet_watchdog
- [ 140.072812 / 01-28 08:54:52.979] [XO_THERM] Result:42 Raw:30474
- [ 141.457613 / 01-28 08:54:54.359] bq24192_is_charger_present: DC is present. DC_IN vol=4551340
- [ 141.457620 / 01-28 08:54:54.359] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 141.457628 / 01-28 08:54:54.359] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3878, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 141.462341 / 01-28 08:54:54.369] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 150.068428 / 01-28 08:55:02.979] pet_watchdog
- [ 150.072818 / 01-28 08:55:02.979] [XO_THERM] Result:42 Raw:30475
- [ 160.068422 / 01-28 08:55:12.979] pet_watchdog
- [ 160.072812 / 01-28 08:55:12.979] [XO_THERM] Result:42 Raw:30479
- [ 170.068422 / 01-28 08:55:22.979] pet_watchdog
- [ 170.072812 / 01-28 08:55:22.979] [XO_THERM] Result:42 Raw:30483
- [ 180.068426 / 01-28 08:55:32.979] pet_watchdog
- [ 180.072816 / 01-28 08:55:32.979] [XO_THERM] Result:42 Raw:30486
- [ 190.068422 / 01-28 08:55:42.979] pet_watchdog
- [ 190.072812 / 01-28 08:55:42.979] [XO_THERM] Result:42 Raw:30487
- [ 200.068422 / 01-28 08:55:52.979] pet_watchdog
- [ 200.072812 / 01-28 08:55:52.979] [XO_THERM] Result:42 Raw:30491
- [ 201.617612 / 01-28 08:55:54.519] bq24192_is_charger_present: DC is present. DC_IN vol=4551340
- [ 201.617620 / 01-28 08:55:54.519] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 201.617628 / 01-28 08:55:54.519] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3878, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 201.622341 / 01-28 08:55:54.529] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 210.068426 / 01-28 08:56:02.979] pet_watchdog
- [ 210.072816 / 01-28 08:56:02.979] [XO_THERM] Result:42 Raw:30494
- [ 220.068422 / 01-28 08:56:12.979] pet_watchdog
- [ 220.072812 / 01-28 08:56:12.979] [XO_THERM] Result:42 Raw:30497
- [ 230.068422 / 01-28 08:56:22.979] pet_watchdog
- [ 230.072816 / 01-28 08:56:22.979] [XO_THERM] Result:42 Raw:30500
- [ 240.068426 / 01-28 08:56:32.979] pet_watchdog
- [ 240.072816 / 01-28 08:56:32.979] [XO_THERM] Result:42 Raw:30503
- [ 250.068422 / 01-28 08:56:42.979] pet_watchdog
- [ 250.072812 / 01-28 08:56:42.979] [XO_THERM] Result:42 Raw:30506
- [ 260.068422 / 01-28 08:56:52.979] pet_watchdog
- [ 260.072812 / 01-28 08:56:52.979] [XO_THERM] Result:42 Raw:30509
- [ 261.777613 / 01-28 08:56:54.679] bq24192_is_charger_present: DC is present. DC_IN vol=4553280
- [ 261.777621 / 01-28 08:56:54.679] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 261.777629 / 01-28 08:56:54.679] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3878, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 261.782342 / 01-28 08:56:54.689] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 270.068426 / 01-28 08:57:02.979] pet_watchdog
- [ 270.072816 / 01-28 08:57:02.979] [XO_THERM] Result:42 Raw:30512
- [ 280.068422 / 01-28 08:57:12.979] pet_watchdog
- [ 280.072812 / 01-28 08:57:12.979] [XO_THERM] Result:42 Raw:30513
- [ 290.068422 / 01-28 08:57:22.979] pet_watchdog
- [ 290.072812 / 01-28 08:57:22.979] [XO_THERM] Result:42 Raw:30516
- [ 300.068421 / 01-28 08:57:32.979] pet_watchdog
- [ 300.072810 / 01-28 08:57:32.979] [XO_THERM] Result:42 Raw:30518
- [ 310.068428 / 01-28 08:57:42.979] pet_watchdog
- [ 310.072818 / 01-28 08:57:42.979] [XO_THERM] Result:42 Raw:30520
- [ 320.068422 / 01-28 08:57:52.979] pet_watchdog
- [ 320.072811 / 01-28 08:57:52.979] [XO_THERM] Result:42 Raw:30521
- [ 321.937604 / 01-28 08:57:54.839] bq24192_is_charger_present: DC is present. DC_IN vol=4553280
- [ 321.937611 / 01-28 08:57:54.839] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 321.937619 / 01-28 08:57:54.839] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3878, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 321.942332 / 01-28 08:57:54.849] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 330.068422 / 01-28 08:58:02.979] pet_watchdog
- [ 330.072813 / 01-28 08:58:02.979] [XO_THERM] Result:42 Raw:30522
- [ 340.068426 / 01-28 08:58:12.979] pet_watchdog
- [ 340.072816 / 01-28 08:58:12.979] [XO_THERM] Result:42 Raw:30525
- [ 350.068422 / 01-28 08:58:22.979] pet_watchdog
- [ 350.072812 / 01-28 08:58:22.979] [XO_THERM] Result:42 Raw:30526
- [ 360.068422 / 01-28 08:58:32.979] pet_watchdog
- [ 360.072812 / 01-28 08:58:32.979] [XO_THERM] Result:42 Raw:30528
- [ 370.068427 / 01-28 08:58:42.979] pet_watchdog
- [ 370.072817 / 01-28 08:58:42.979] [XO_THERM] Result:42 Raw:30531
- [ 380.068422 / 01-28 08:58:52.979] pet_watchdog
- [ 380.072812 / 01-28 08:58:52.979] [XO_THERM] Result:41 Raw:30535
- [ 382.097621 / 01-28 08:58:54.999] bq24192_is_charger_present: DC is present. DC_IN vol=4555240
- [ 382.097628 / 01-28 08:58:54.999] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 382.097637 / 01-28 08:58:54.999] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3878, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 382.102361 / 01-28 08:58:55.009] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 390.068426 / 01-28 08:59:02.979] pet_watchdog
- [ 390.072815 / 01-28 08:59:02.979] [XO_THERM] Result:41 Raw:30537
- [ 400.068428 / 01-28 08:59:12.979] pet_watchdog
- [ 400.072817 / 01-28 08:59:12.979] [XO_THERM] Result:41 Raw:30540
- [ 410.068422 / 01-28 08:59:22.979] pet_watchdog
- [ 410.072812 / 01-28 08:59:22.979] [XO_THERM] Result:41 Raw:30542
- [ 420.068422 / 01-28 08:59:32.979] pet_watchdog
- [ 420.072812 / 01-28 08:59:32.979] [XO_THERM] Result:41 Raw:30545
- [ 430.068428 / 01-28 08:59:42.979] pet_watchdog
- [ 430.072818 / 01-28 08:59:42.979] [XO_THERM] Result:41 Raw:30546
- [ 440.068422 / 01-28 08:59:52.979] pet_watchdog
- [ 440.072812 / 01-28 08:59:52.979] [XO_THERM] Result:41 Raw:30547
- [ 442.257612 / 01-28 08:59:55.159] bq24192_is_charger_present: DC is present. DC_IN vol=4553280
- [ 442.257620 / 01-28 08:59:55.159] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 442.257628 / 01-28 08:59:55.159] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3878, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 442.262339 / 01-28 08:59:55.169] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 450.068422 / 01-28 09:00:02.979] pet_watchdog
- [ 450.072811 / 01-28 09:00:02.979] [XO_THERM] Result:41 Raw:30547
- [ 460.068428 / 01-28 09:00:12.979] pet_watchdog
- [ 460.072818 / 01-28 09:00:12.979] [XO_THERM] Result:41 Raw:30547
- [ 470.068426 / 01-28 09:00:22.979] pet_watchdog
- [ 470.072816 / 01-28 09:00:22.979] [XO_THERM] Result:41 Raw:30547
- [ 480.068422 / 01-28 09:00:32.979] pet_watchdog
- [ 480.072812 / 01-28 09:00:32.979] [XO_THERM] Result:41 Raw:30550
- [ 490.068428 / 01-28 09:00:42.979] pet_watchdog
- [ 490.072817 / 01-28 09:00:42.979] [XO_THERM] Result:41 Raw:30549
- [ 500.068422 / 01-28 09:00:52.979] pet_watchdog
- [ 500.072812 / 01-28 09:00:52.979] [XO_THERM] Result:41 Raw:30548
- [ 502.417601 / 01-28 09:00:55.319] bq24192_is_charger_present: DC is present. DC_IN vol=4551340
- [ 502.417609 / 01-28 09:00:55.319] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 502.417617 / 01-28 09:00:55.319] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3878, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 502.422330 / 01-28 09:00:55.329] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 510.068422 / 01-28 09:01:02.979] pet_watchdog
- [ 510.072812 / 01-28 09:01:02.979] [XO_THERM] Result:41 Raw:30550
- [ 520.068427 / 01-28 09:01:12.979] pet_watchdog
- [ 520.072817 / 01-28 09:01:12.979] [XO_THERM] Result:41 Raw:30552
- [ 530.068422 / 01-28 09:01:22.979] pet_watchdog
- [ 530.072812 / 01-28 09:01:22.979] [XO_THERM] Result:41 Raw:30552
- [ 540.068422 / 01-28 09:01:32.979] pet_watchdog
- [ 540.072812 / 01-28 09:01:32.979] [XO_THERM] Result:41 Raw:30552
- [ 550.068428 / 01-28 09:01:42.979] pet_watchdog
- [ 550.072817 / 01-28 09:01:42.979] [XO_THERM] Result:41 Raw:30554
- [ 560.068422 / 01-28 09:01:52.979] pet_watchdog
- [ 560.072812 / 01-28 09:01:52.979] [XO_THERM] Result:41 Raw:30556
- [ 562.577612 / 01-28 09:01:55.479] bq24192_is_charger_present: DC is present. DC_IN vol=4551340
- [ 562.577620 / 01-28 09:01:55.479] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 562.577628 / 01-28 09:01:55.479] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3878, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 562.582340 / 01-28 09:01:55.489] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 570.068422 / 01-28 09:02:02.979] pet_watchdog
- [ 570.072812 / 01-28 09:02:02.979] [XO_THERM] Result:41 Raw:30557
- [ 580.068428 / 01-28 09:02:12.979] pet_watchdog
- [ 580.072828 / 01-28 09:02:12.979] [XO_THERM] Result:41 Raw:30559
- [ 590.068422 / 01-28 09:02:22.979] pet_watchdog
- [ 590.072812 / 01-28 09:02:22.979] [XO_THERM] Result:41 Raw:30558
- [ 600.068422 / 01-28 09:02:32.979] pet_watchdog
- [ 600.072812 / 01-28 09:02:32.979] [XO_THERM] Result:41 Raw:30561
- [ 610.068428 / 01-28 09:02:42.979] pet_watchdog
- [ 610.072818 / 01-28 09:02:42.979] [XO_THERM] Result:41 Raw:30561
- [ 620.068423 / 01-28 09:02:52.979] pet_watchdog
- [ 620.072812 / 01-28 09:02:52.979] [XO_THERM] Result:41 Raw:30561
- [ 622.737612 / 01-28 09:02:55.639] bq24192_is_charger_present: DC is present. DC_IN vol=4551340
- [ 622.737620 / 01-28 09:02:55.639] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 622.737628 / 01-28 09:02:55.639] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3878, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 622.742341 / 01-28 09:02:55.649] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 630.068423 / 01-28 09:03:02.979] pet_watchdog
- [ 630.072812 / 01-28 09:03:02.979] [XO_THERM] Result:41 Raw:30560
- [ 640.068428 / 01-28 09:03:12.979] pet_watchdog
- [ 640.072817 / 01-28 09:03:12.979] [XO_THERM] Result:41 Raw:30560
- [ 650.068422 / 01-28 09:03:22.979] pet_watchdog
- [ 650.072812 / 01-28 09:03:22.979] [XO_THERM] Result:41 Raw:30559
- [ 660.068422 / 01-28 09:03:32.979] pet_watchdog
- [ 660.072812 / 01-28 09:03:32.979] [XO_THERM] Result:41 Raw:30556
- [ 670.068427 / 01-28 09:03:42.979] pet_watchdog
- [ 670.072817 / 01-28 09:03:42.979] [XO_THERM] Result:41 Raw:30555
- [ 673.487939 / 01-28 09:03:46.399] max17048_interrupt_handler : MAX17048 interupt occured
- [ 673.488517 / 01-28 09:03:46.399] max17048_get_config : config = 0x327e
- [ 673.489050 / 01-28 09:03:46.399] max17048_get_status : status = 0x20ff
- [ 673.490100 / 01-28 09:03:46.399] max17048_work : Raw SOC : 0x7dee / vcell : 0xc4b
- [ 673.490108 / 01-28 09:03:46.399] max17048_work : Reported Capacity : 67 / voltage : 3933
- [ 673.490129 / 01-28 09:03:46.399] max17048_clear_interrupt.
- [ 673.500448 / 01-28 09:03:46.409] max17048_set_rcomp_by_temperature : temp =39, PreviousRcomp =0x32 -> newRcomp = 0x32
- [ 680.068423 / 01-28 09:03:52.979] pet_watchdog
- [ 680.072814 / 01-28 09:03:52.979] [XO_THERM] Result:41 Raw:30554
- [ 682.897602 / 01-28 09:03:55.799] bq24192_is_charger_present: DC is present. DC_IN vol=4553280
- [ 682.897610 / 01-28 09:03:55.799] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 682.897618 / 01-28 09:03:55.799] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3933, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 682.902331 / 01-28 09:03:55.809] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 690.068423 / 01-28 09:04:02.979] pet_watchdog
- [ 690.072812 / 01-28 09:04:02.979] [XO_THERM] Result:41 Raw:30555
- [ 700.068428 / 01-28 09:04:12.979] pet_watchdog
- [ 700.072818 / 01-28 09:04:12.979] [XO_THERM] Result:41 Raw:30556
- [ 710.068422 / 01-28 09:04:22.979] pet_watchdog
- [ 710.072812 / 01-28 09:04:22.979] [XO_THERM] Result:41 Raw:30555
- [ 720.068423 / 01-28 09:04:32.979] pet_watchdog
- [ 720.072813 / 01-28 09:04:32.979] [XO_THERM] Result:41 Raw:30556
- [ 730.068428 / 01-28 09:04:42.979] pet_watchdog
- [ 730.072817 / 01-28 09:04:42.979] [XO_THERM] Result:41 Raw:30557
- [ 740.068423 / 01-28 09:04:52.979] pet_watchdog
- [ 740.072812 / 01-28 09:04:52.979] [XO_THERM] Result:41 Raw:30557
- [ 743.057615 / 01-28 09:04:55.959] bq24192_is_charger_present: DC is present. DC_IN vol=4555240
- [ 743.057623 / 01-28 09:04:55.959] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 743.057631 / 01-28 09:04:55.959] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3933, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 743.062344 / 01-28 09:04:55.969] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 750.068422 / 01-28 09:05:02.979] pet_watchdog
- [ 750.072812 / 01-28 09:05:02.979] [XO_THERM] Result:41 Raw:30559
- [ 760.068427 / 01-28 09:05:12.979] pet_watchdog
- [ 760.072817 / 01-28 09:05:12.979] [XO_THERM] Result:41 Raw:30557
- [ 770.068422 / 01-28 09:05:22.979] pet_watchdog
- [ 770.072812 / 01-28 09:05:22.979] [XO_THERM] Result:41 Raw:30558
- [ 780.068423 / 01-28 09:05:32.979] pet_watchdog
- [ 780.072812 / 01-28 09:05:32.979] [XO_THERM] Result:41 Raw:30556
- [ 790.068431 / 01-28 09:05:42.979] pet_watchdog
- [ 790.072821 / 01-28 09:05:42.979] [XO_THERM] Result:41 Raw:30557
- [ 800.068422 / 01-28 09:05:52.979] pet_watchdog
- [ 800.072812 / 01-28 09:05:52.979] [XO_THERM] Result:41 Raw:30556
- [ 803.217613 / 01-28 09:05:56.119] bq24192_is_charger_present: DC is present. DC_IN vol=4553280
- [ 803.217620 / 01-28 09:05:56.119] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 803.217628 / 01-28 09:05:56.119] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3933, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 803.222341 / 01-28 09:05:56.129] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 810.068430 / 01-28 09:06:02.979] pet_watchdog
- [ 810.072820 / 01-28 09:06:02.979] [XO_THERM] Result:41 Raw:30558
- [ 820.068427 / 01-28 09:06:12.979] pet_watchdog
- [ 820.072817 / 01-28 09:06:12.979] [XO_THERM] Result:41 Raw:30559
- [ 830.068423 / 01-28 09:06:22.979] pet_watchdog
- [ 830.072813 / 01-28 09:06:22.979] [XO_THERM] Result:41 Raw:30561
- [ 840.068422 / 01-28 09:06:32.979] pet_watchdog
- [ 840.072812 / 01-28 09:06:32.979] [XO_THERM] Result:41 Raw:30559
- [ 850.068427 / 01-28 09:06:42.979] pet_watchdog
- [ 850.072817 / 01-28 09:06:42.979] [XO_THERM] Result:41 Raw:30560
- [ 860.068422 / 01-28 09:06:52.979] pet_watchdog
- [ 860.072812 / 01-28 09:06:52.979] [XO_THERM] Result:41 Raw:30558
- [ 863.377613 / 01-28 09:06:56.279] bq24192_is_charger_present: DC is present. DC_IN vol=4555240
- [ 863.377620 / 01-28 09:06:56.279] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 863.377629 / 01-28 09:06:56.279] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3933, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 863.382342 / 01-28 09:06:56.289] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 870.068422 / 01-28 09:07:02.979] pet_watchdog
- [ 870.072812 / 01-28 09:07:02.979] [XO_THERM] Result:41 Raw:30559
- [ 880.068428 / 01-28 09:07:12.979] pet_watchdog
- [ 880.072818 / 01-28 09:07:12.979] [XO_THERM] Result:41 Raw:30559
- [ 890.068422 / 01-28 09:07:22.979] pet_watchdog
- [ 890.072812 / 01-28 09:07:22.979] [XO_THERM] Result:41 Raw:30562
- [ 900.068422 / 01-28 09:07:32.979] pet_watchdog
- [ 900.072812 / 01-28 09:07:32.979] [XO_THERM] Result:41 Raw:30562
- [ 910.068428 / 01-28 09:07:42.979] pet_watchdog
- [ 910.072818 / 01-28 09:07:42.979] [XO_THERM] Result:41 Raw:30562
- [ 920.068422 / 01-28 09:07:52.979] pet_watchdog
- [ 920.072812 / 01-28 09:07:52.979] [XO_THERM] Result:41 Raw:30562
- [ 923.537613 / 01-28 09:07:56.439] bq24192_is_charger_present: DC is present. DC_IN vol=4553280
- [ 923.537621 / 01-28 09:07:56.439] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 923.537629 / 01-28 09:07:56.439] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3933, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 923.542343 / 01-28 09:07:56.449] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 930.068422 / 01-28 09:08:02.979] pet_watchdog
- [ 930.072812 / 01-28 09:08:02.979] [XO_THERM] Result:41 Raw:30564
- [ 940.068428 / 01-28 09:08:12.979] pet_watchdog
- [ 940.072818 / 01-28 09:08:12.979] [XO_THERM] Result:41 Raw:30566
- [ 950.068422 / 01-28 09:08:22.979] pet_watchdog
- [ 950.072812 / 01-28 09:08:22.979] [XO_THERM] Result:41 Raw:30565
- [ 960.068422 / 01-28 09:08:32.979] pet_watchdog
- [ 960.072812 / 01-28 09:08:32.979] [XO_THERM] Result:41 Raw:30565
- [ 970.068428 / 01-28 09:08:42.979] pet_watchdog
- [ 970.072818 / 01-28 09:08:42.979] [XO_THERM] Result:41 Raw:30565
- [ 980.068422 / 01-28 09:08:52.979] pet_watchdog
- [ 980.072812 / 01-28 09:08:52.979] [XO_THERM] Result:41 Raw:30566
- [ 983.697614 / 01-28 09:08:56.599] bq24192_is_charger_present: DC is present. DC_IN vol=4553280
- [ 983.697622 / 01-28 09:08:56.599] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 983.697630 / 01-28 09:08:56.599] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3933, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 983.702341 / 01-28 09:08:56.609] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 990.068423 / 01-28 09:09:02.979] pet_watchdog
- [ 990.072812 / 01-28 09:09:02.979] [XO_THERM] Result:41 Raw:30564
- [ 1000.068427 / 01-28 09:09:12.979] pet_watchdog
- [ 1000.072817 / 01-28 09:09:12.979] [XO_THERM] Result:41 Raw:30564
- [ 1010.068422 / 01-28 09:09:22.979] pet_watchdog
- [ 1010.072812 / 01-28 09:09:22.979] [XO_THERM] Result:41 Raw:30563
- [ 1020.068422 / 01-28 09:09:32.979] pet_watchdog
- [ 1020.072812 / 01-28 09:09:32.979] [XO_THERM] Result:41 Raw:30564
- [ 1030.068432 / 01-28 09:09:42.979] pet_watchdog
- [ 1030.072824 / 01-28 09:09:42.979] [XO_THERM] Result:41 Raw:30566
- [ 1040.068422 / 01-28 09:09:52.979] pet_watchdog
- [ 1040.072812 / 01-28 09:09:52.979] [XO_THERM] Result:41 Raw:30568
- [ 1043.857615 / 01-28 09:09:56.759] bq24192_is_charger_present: DC is present. DC_IN vol=4553280
- [ 1043.857622 / 01-28 09:09:56.759] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 1043.857631 / 01-28 09:09:56.759] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3933, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 1043.862347 / 01-28 09:09:56.769] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 1050.068423 / 01-28 09:10:02.979] pet_watchdog
- [ 1050.072813 / 01-28 09:10:02.979] [XO_THERM] Result:41 Raw:30567
- [ 1060.068428 / 01-28 09:10:12.979] pet_watchdog
- [ 1060.072818 / 01-28 09:10:12.979] [XO_THERM] Result:41 Raw:30566
- [ 1070.068422 / 01-28 09:10:22.979] pet_watchdog
- [ 1070.072813 / 01-28 09:10:22.979] [XO_THERM] Result:41 Raw:30565
- [ 1080.068423 / 01-28 09:10:32.979] pet_watchdog
- [ 1080.072812 / 01-28 09:10:32.979] [XO_THERM] Result:41 Raw:30567
- [ 1090.068428 / 01-28 09:10:42.979] pet_watchdog
- [ 1090.072818 / 01-28 09:10:42.979] [XO_THERM] Result:41 Raw:30570
- [ 1100.068422 / 01-28 09:10:52.979] pet_watchdog
- [ 1100.072812 / 01-28 09:10:52.979] [XO_THERM] Result:41 Raw:30569
- [ 1104.017615 / 01-28 09:10:56.919] bq24192_is_charger_present: DC is present. DC_IN vol=4553280
- [ 1104.017622 / 01-28 09:10:56.919] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 1104.017630 / 01-28 09:10:56.919] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3933, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 1104.022344 / 01-28 09:10:56.929] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 1110.068426 / 01-28 09:11:02.979] pet_watchdog
- [ 1110.072816 / 01-28 09:11:02.979] [XO_THERM] Result:41 Raw:30569
- [ 1120.068428 / 01-28 09:11:12.979] pet_watchdog
- [ 1120.072817 / 01-28 09:11:12.979] [XO_THERM] Result:41 Raw:30569
- [ 1130.068422 / 01-28 09:11:22.979] pet_watchdog
- [ 1130.072812 / 01-28 09:11:22.979] [XO_THERM] Result:41 Raw:30570
- [ 1140.068422 / 01-28 09:11:32.979] pet_watchdog
- [ 1140.072812 / 01-28 09:11:32.979] [XO_THERM] Result:41 Raw:30567
- [ 1150.068427 / 01-28 09:11:42.979] pet_watchdog
- [ 1150.072817 / 01-28 09:11:42.979] [XO_THERM] Result:41 Raw:30568
- [ 1160.068423 / 01-28 09:11:52.979] pet_watchdog
- [ 1160.072813 / 01-28 09:11:52.979] [XO_THERM] Result:41 Raw:30568
- [ 1164.177604 / 01-28 09:11:57.079] bq24192_is_charger_present: DC is present. DC_IN vol=4553280
- [ 1164.177612 / 01-28 09:11:57.079] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 1164.177620 / 01-28 09:11:57.079] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3933, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 1164.182334 / 01-28 09:11:57.089] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 1170.068423 / 01-28 09:12:02.979] pet_watchdog
- [ 1170.072812 / 01-28 09:12:02.979] [XO_THERM] Result:41 Raw:30569
- [ 1180.068428 / 01-28 09:12:12.979] pet_watchdog
- [ 1180.072817 / 01-28 09:12:12.979] [XO_THERM] Result:41 Raw:30571
- [ 1190.068423 / 01-28 09:12:22.979] pet_watchdog
- [ 1190.072812 / 01-28 09:12:22.979] [XO_THERM] Result:41 Raw:30571
- [ 1200.068422 / 01-28 09:12:32.979] pet_watchdog
- [ 1200.072812 / 01-28 09:12:32.979] [XO_THERM] Result:41 Raw:30571
- [ 1210.068428 / 01-28 09:12:42.979] pet_watchdog
- [ 1210.072818 / 01-28 09:12:42.979] [XO_THERM] Result:41 Raw:30572
- [ 1220.068423 / 01-28 09:12:52.979] pet_watchdog
- [ 1220.072812 / 01-28 09:12:52.979] [XO_THERM] Result:41 Raw:30571
- [ 1224.337613 / 01-28 09:12:57.239] bq24192_is_charger_present: DC is present. DC_IN vol=4555240
- [ 1224.337620 / 01-28 09:12:57.239] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 1224.337629 / 01-28 09:12:57.239] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3933, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 1224.342343 / 01-28 09:12:57.249] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 1230.068422 / 01-28 09:13:02.979] pet_watchdog
- [ 1230.072812 / 01-28 09:13:02.979] [XO_THERM] Result:41 Raw:30572
- [ 1240.068428 / 01-28 09:13:12.979] pet_watchdog
- [ 1240.072818 / 01-28 09:13:12.979] [XO_THERM] Result:41 Raw:30572
- [ 1250.068422 / 01-28 09:13:22.979] pet_watchdog
- [ 1250.072812 / 01-28 09:13:22.979] [XO_THERM] Result:41 Raw:30573
- [ 1260.068422 / 01-28 09:13:32.979] pet_watchdog
- [ 1260.072812 / 01-28 09:13:32.979] [XO_THERM] Result:41 Raw:30572
- [ 1270.068428 / 01-28 09:13:42.979] pet_watchdog
- [ 1270.072818 / 01-28 09:13:42.979] [XO_THERM] Result:41 Raw:30570
- [ 1280.068423 / 01-28 09:13:52.979] pet_watchdog
- [ 1280.072812 / 01-28 09:13:52.979] [XO_THERM] Result:41 Raw:30572
- [ 1280.921295 / 01-28 09:13:53.829] [Touch] 1 finger pressed : <0> x[****] y[****] z[ 55]
- [ 1281.025607 / 01-28 09:13:53.939] [Touch] touch_release[] : <0> x[****] y[****]
- [ 1281.837897 / 01-28 09:13:54.749] [Touch] 1 finger pressed : <0> x[****] y[****] z[ 53]
- [ 1281.923161 / 01-28 09:13:54.829] [Touch] touch_release[] : <0> x[****] y[****]
- [ 1282.009727 / 01-28 09:13:54.919] android_usb android0: gadget enable(0)
- [ 1282.009744 / 01-28 09:13:54.919] dwc3 f9200000.dwc3: request d75a4680 was not queued to ep0out
- [ 1282.009803 / 01-28 09:13:54.919] android_usb android0: gadget enable(1)
- [ 1282.009813 / 01-28 09:13:54.919] adb_release
- [ 1282.044703 / 01-28 09:13:54.959] adb_open
- [ 1282.109265 / 01-28 09:13:55.019] android_work: did not send uevent (1 1 (null))
- [ 1282.232015 / 01-28 09:13:55.149] android_work: sent uevent USB_STATE=DISCONNECTED
- [ 1282.287895 / 01-28 09:13:55.199] android_work: did not send uevent (0 0 (null))
- [ 1282.343980 / 01-28 09:13:55.259] android_work: sent uevent USB_STATE=CONNECTED
- [ 1282.347563 / 01-28 09:13:55.259] android_work: sent uevent USB_STATE=DISCONNECTED
- [ 1282.475920 / 01-28 09:13:55.389] android_work: sent uevent USB_STATE=CONNECTED
- [ 1282.477256 / 01-28 09:13:55.389] android_usb gadget: high-speed config #1: fe8050c8.android_usb
- [ 1282.528432 / 01-28 09:13:55.439] android_work: sent uevent USB_STATE=CONFIGURED
- [ 1282.528440 / 01-28 09:13:55.439] [cable info] boot_mode:0, dlcomplete:0
- [ 1284.497633 / 01-28 09:13:57.399] bq24192_is_charger_present: DC is present. DC_IN vol=4553280
- [ 1284.497641 / 01-28 09:13:57.399] [Z_US/Z_CN] befor adjust batt_temp = 38
- [ 1284.497650 / 01-28 09:13:57.399] LGE charging scenario : state 0 -> 0(0-0), temp=38, volt=3933, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 1284.502972 / 01-28 09:13:57.409] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 1290.068432 / 01-28 09:14:02.979] pet_watchdog
- [ 1290.072878 / 01-28 09:14:02.979] [XO_THERM] Result:41 Raw:30568
- [ 1300.068417 / 01-28 09:14:12.979] pet_watchdog
- [ 1300.072860 / 01-28 09:14:12.979] [XO_THERM] Result:42 Raw:30529
- [ 1310.068453 / 01-28 09:14:22.979] pet_watchdog
- [ 1310.072860 / 01-28 09:14:22.979] [XO_THERM] Result:42 Raw:30497
- [ 1320.068438 / 01-28 09:14:32.979] pet_watchdog
- [ 1320.072846 / 01-28 09:14:32.979] [XO_THERM] Result:42 Raw:30474
- [ 1324.586567 / 01-28 09:14:37.499] adb_release
- [ 1324.586584 / 01-28 09:14:37.499] dwc3 f9200000.dwc3: request d75a4680 was not queued to ep0out
- [ 1324.586748 / 01-28 09:14:37.499] android_usb android0: gadget enable(0)
- [ 1324.625942 / 01-28 09:14:37.539] android_usb android0: gadget enable(1)
- [ 1324.726818 / 01-28 09:14:37.629] android_work: did not send uevent (1 1 (null))
- [ 1324.860666 / 01-28 09:14:37.769] android_work: sent uevent USB_STATE=DISCONNECTED
- [ 1324.916545 / 01-28 09:14:37.819] android_work: did not send uevent (0 0 (null))
- [ 1324.972665 / 01-28 09:14:37.879] android_work: sent uevent USB_STATE=CONNECTED
- [ 1324.976306 / 01-28 09:14:37.879] android_work: sent uevent USB_STATE=DISCONNECTED
- [ 1325.026866 / 01-28 09:14:37.929] EXT4-fs (mmcblk0p34): mounted filesystem with ordered data mode. Opts:
- [ 1325.104590 / 01-28 09:14:38.009] android_work: sent uevent USB_STATE=CONNECTED
- [ 1325.105992 / 01-28 09:14:38.009] android_usb gadget: high-speed config #1: fe8050c8.android_usb
- [ 1325.158459 / 01-28 09:14:38.069] android_work: sent uevent USB_STATE=CONFIGURED
- [ 1325.158471 / 01-28 09:14:38.069] [cable info] boot_mode:0, dlcomplete:0
- [ 1327.639593 / 01-28 09:14:40.549] EXT4-fs (mmcblk0p34): mounted filesystem with ordered data mode. Opts:
- [ 1330.068442 / 01-28 09:14:42.979] pet_watchdog
- [ 1330.072857 / 01-28 09:14:42.979] [XO_THERM] Result:42 Raw:30429
- [ 1340.068428 / 01-28 09:14:52.979] pet_watchdog
- [ 1340.072829 / 01-28 09:14:52.979] [XO_THERM] Result:43 Raw:30306
- [ 1344.657674 / 01-28 09:14:57.559] bq24192_is_charger_present: DC is present. DC_IN vol=4551340
- [ 1344.657683 / 01-28 09:14:57.559] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 1344.657692 / 01-28 09:14:57.559] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3933, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 1344.663018 / 01-28 09:14:57.569] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 1350.068424 / 01-28 09:15:02.979] pet_watchdog
- [ 1350.072815 / 01-28 09:15:02.979] [XO_THERM] Result:43 Raw:30355
- [ 1360.068429 / 01-28 09:15:12.979] pet_watchdog
- [ 1360.072820 / 01-28 09:15:12.979] [XO_THERM] Result:42 Raw:30407
- [ 1370.068422 / 01-28 09:15:22.979] pet_watchdog
- [ 1370.072811 / 01-28 09:15:22.979] [XO_THERM] Result:42 Raw:30437
- [ 1380.068425 / 01-28 09:15:32.979] pet_watchdog
- [ 1380.072817 / 01-28 09:15:32.979] [XO_THERM] Result:42 Raw:30456
- [ 1390.068433 / 01-28 09:15:42.979] pet_watchdog
- [ 1390.072823 / 01-28 09:15:42.979] [XO_THERM] Result:42 Raw:30470
- [ 1400.068431 / 01-28 09:15:52.979] pet_watchdog
- [ 1400.072821 / 01-28 09:15:52.979] [XO_THERM] Result:42 Raw:30481
- [ 1404.817617 / 01-28 09:15:57.719] bq24192_is_charger_present: DC is present. DC_IN vol=4553280
- [ 1404.817624 / 01-28 09:15:57.719] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 1404.817632 / 01-28 09:15:57.719] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3933, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 1404.822343 / 01-28 09:15:57.729] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 1410.068424 / 01-28 09:16:02.979] pet_watchdog
- [ 1410.072815 / 01-28 09:16:02.979] [XO_THERM] Result:42 Raw:30488
- [ 1420.068431 / 01-28 09:16:12.979] pet_watchdog
- [ 1420.072821 / 01-28 09:16:12.979] [XO_THERM] Result:42 Raw:30494
- [ 1430.068421 / 01-28 09:16:22.979] pet_watchdog
- [ 1430.072811 / 01-28 09:16:22.979] [XO_THERM] Result:42 Raw:30500
- [ 1440.068422 / 01-28 09:16:32.979] pet_watchdog
- [ 1440.072811 / 01-28 09:16:32.979] [XO_THERM] Result:42 Raw:30503
- [ 1450.068431 / 01-28 09:16:42.979] pet_watchdog
- [ 1450.072820 / 01-28 09:16:42.979] [XO_THERM] Result:42 Raw:30508
- [ 1460.068423 / 01-28 09:16:52.979] pet_watchdog
- [ 1460.072813 / 01-28 09:16:52.979] [XO_THERM] Result:42 Raw:30513
- [ 1464.977615 / 01-28 09:16:57.879] bq24192_is_charger_present: DC is present. DC_IN vol=4553280
- [ 1464.977623 / 01-28 09:16:57.879] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 1464.977631 / 01-28 09:16:57.879] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3933, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 1464.982346 / 01-28 09:16:57.889] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 1470.068421 / 01-28 09:17:02.979] pet_watchdog
- [ 1470.072811 / 01-28 09:17:02.979] [XO_THERM] Result:42 Raw:30516
- [ 1480.068430 / 01-28 09:17:12.979] pet_watchdog
- [ 1480.072821 / 01-28 09:17:12.979] [XO_THERM] Result:42 Raw:30518
- [ 1490.068423 / 01-28 09:17:22.979] pet_watchdog
- [ 1490.072813 / 01-28 09:17:22.979] [XO_THERM] Result:42 Raw:30521
- [ 1500.068423 / 01-28 09:17:32.979] pet_watchdog
- [ 1500.072814 / 01-28 09:17:32.979] [XO_THERM] Result:42 Raw:30523
- [ 1510.068429 / 01-28 09:17:42.979] pet_watchdog
- [ 1510.072822 / 01-28 09:17:42.979] [XO_THERM] Result:42 Raw:30523
- [ 1520.068423 / 01-28 09:17:52.979] pet_watchdog
- [ 1520.072813 / 01-28 09:17:52.979] [XO_THERM] Result:42 Raw:30524
- [ 1525.137617 / 01-28 09:17:58.039] bq24192_is_charger_present: DC is present. DC_IN vol=4555240
- [ 1525.137624 / 01-28 09:17:58.039] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 1525.137633 / 01-28 09:17:58.039] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3933, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 1525.142336 / 01-28 09:17:58.049] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 1530.068423 / 01-28 09:18:02.979] pet_watchdog
- [ 1530.072813 / 01-28 09:18:02.979] [XO_THERM] Result:42 Raw:30526
- [ 1540.068430 / 01-28 09:18:12.979] pet_watchdog
- [ 1540.072820 / 01-28 09:18:12.979] [XO_THERM] Result:42 Raw:30529
- [ 1550.068422 / 01-28 09:18:22.979] pet_watchdog
- [ 1550.072812 / 01-28 09:18:22.979] [XO_THERM] Result:42 Raw:30531
- [ 1560.068423 / 01-28 09:18:32.979] pet_watchdog
- [ 1560.072812 / 01-28 09:18:32.979] [XO_THERM] Result:41 Raw:30533
- [ 1570.068430 / 01-28 09:18:42.979] pet_watchdog
- [ 1570.072820 / 01-28 09:18:42.979] [XO_THERM] Result:41 Raw:30534
- [ 1580.068423 / 01-28 09:18:52.979] pet_watchdog
- [ 1580.072812 / 01-28 09:18:52.979] [XO_THERM] Result:41 Raw:30535
- [ 1585.297625 / 01-28 09:18:58.199] bq24192_is_charger_present: DC is present. DC_IN vol=4553280
- [ 1585.297633 / 01-28 09:18:58.199] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 1585.297641 / 01-28 09:18:58.199] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3933, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 1585.302356 / 01-28 09:18:58.209] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 1590.068423 / 01-28 09:19:02.979] pet_watchdog
- [ 1590.072813 / 01-28 09:19:02.979] [XO_THERM] Result:41 Raw:30533
- [ 1600.068430 / 01-28 09:19:12.979] pet_watchdog
- [ 1600.072820 / 01-28 09:19:12.979] [XO_THERM] Result:41 Raw:30533
- [ 1610.068423 / 01-28 09:19:22.979] pet_watchdog
- [ 1610.072813 / 01-28 09:19:22.979] [XO_THERM] Result:42 Raw:30532
- [ 1620.068422 / 01-28 09:19:32.979] pet_watchdog
- [ 1620.072812 / 01-28 09:19:32.979] [XO_THERM] Result:41 Raw:30533
- [ 1630.068430 / 01-28 09:19:42.979] pet_watchdog
- [ 1630.072820 / 01-28 09:19:42.979] [XO_THERM] Result:41 Raw:30535
- [ 1640.068423 / 01-28 09:19:52.979] pet_watchdog
- [ 1640.072813 / 01-28 09:19:52.979] [XO_THERM] Result:41 Raw:30536
- [ 1645.457613 / 01-28 09:19:58.359] bq24192_is_charger_present: DC is present. DC_IN vol=4549380
- [ 1645.457621 / 01-28 09:19:58.359] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 1645.457629 / 01-28 09:19:58.359] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3933, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 1645.462343 / 01-28 09:19:58.369] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 1650.068423 / 01-28 09:20:02.979] pet_watchdog
- [ 1650.072812 / 01-28 09:20:02.979] [XO_THERM] Result:41 Raw:30536
- [ 1660.068430 / 01-28 09:20:12.979] pet_watchdog
- [ 1660.072820 / 01-28 09:20:12.979] [XO_THERM] Result:41 Raw:30538
- [ 1670.068423 / 01-28 09:20:22.979] pet_watchdog
- [ 1670.072812 / 01-28 09:20:22.979] [XO_THERM] Result:41 Raw:30540
- [ 1680.068442 / 01-28 09:20:32.979] pet_watchdog
- [ 1680.072832 / 01-28 09:20:32.979] [XO_THERM] Result:41 Raw:30541
- [ 1690.068430 / 01-28 09:20:42.979] pet_watchdog
- [ 1690.072820 / 01-28 09:20:42.979] [XO_THERM] Result:41 Raw:30543
- [ 1700.068427 / 01-28 09:20:52.979] pet_watchdog
- [ 1700.072817 / 01-28 09:20:52.979] [XO_THERM] Result:41 Raw:30545
- [ 1705.617614 / 01-28 09:20:58.519] bq24192_is_charger_present: DC is present. DC_IN vol=4551340
- [ 1705.617621 / 01-28 09:20:58.519] [Z_US/Z_CN] befor adjust batt_temp = 39
- [ 1705.617630 / 01-28 09:20:58.519] LGE charging scenario : state 0 -> 0(0-0), temp=39, volt=3933, BTM=0, charger=1, cur_set=1408/1408, chg_cur = 200
- [ 1705.622345 / 01-28 09:20:58.529] bq24192_reginfo: 0x4A 0x1B 0x38 0x10 0xD6 0x8A 0xBF 0x4B 0x6C 0x00
- [ 1710.068422 / 01-28 09:21:02.979] pet_watchdog
- [ 1710.072812 / 01-28 09:21:02.979] [XO_THERM] Result:41 Raw:30545
- [ 1720.068430 / 01-28 09:21:12.979] pet_watchdog
- [ 1720.072820 / 01-28 09:21:12.979] [XO_THERM] Result:41 Raw:30544
- [ 1730.068423 / 01-28 09:21:22.979] pet_watchdog
- [ 1730.072812 / 01-28 09:21:22.979] [XO_THERM] Result:41 Raw:30546
- [ 1733.785594 / 01-28 09:21:26.699] [Touch] 1 finger pressed : <0> x[****] y[****] z[ 64]
- [ 1733.889857 / 01-28 09:21:26.799] [Touch] touch_release[] : <0> x[****] y[****]
- [ 1736.775578 / 01-28 09:21:29.679] [Touch] 1 finger pressed : <0> x[****] y[****] z[ 71]
- [ 1736.860529 / 01-28 09:21:29.769] [Touch] touch_release[] : <0> x[****] y[****]
- [ 1737.013428 / 01-28 09:21:29.919] EXT4-fs (mmcblk0p38): mounted filesystem with ordered data mode. Opts: barrier=1,noauto_da_alloc,errors=continue
- [ 1739.010081 / 01-28 09:21:31.919] EXT4-fs (mmcblk0p34): mounted filesystem with ordered data mode. Opts: barrier=1
- [ 1739.090060 / 01-28 09:21:31.999] SysRq : Emergency Remount R/O
- [ 1739.090165 / 01-28 09:21:31.999] EXT4-fs (mmcblk0p35): re-mount start. with ro
- [ 1739.091138 / 01-28 09:21:31.999] mdss_fb_release_all: try to close unopened fb 2! from recovery
- [ 1739.091150 / 01-28 09:21:31.999] mdss_fb_release_all: try to close unopened fb 1! from recovery
- [ 1739.091198 / 01-28 09:21:31.999] mdss_fb_release_all: unknown process recovery pid=183 mfd->ref=0
- [ 1739.093230 / 01-28 09:21:31.999] mdss_fb_release_all: fb ref_cnt is 0
- [ 1739.093239 / 01-28 09:21:31.999] mdss_fb_blank_sub: BLANK
- [ 1739.125849 / 01-28 09:21:32.039] [Zee][OLED] mdss_dsi_panel_bklt_dcs: level=0, blmap=0, blackout=true
- [ 1739.142562 / 01-28 09:21:32.059] mdss_mdp_ctl_stop: ctl_num=0
- [ 1739.142574 / 01-28 09:21:32.059] [Touch] lcd_notifier_callback: event = 3
- [ 1739.142585 / 01-28 09:21:32.059] [Touch] touch_lcd_suspend : disable_irq !!
- [ 1739.142599 / 01-28 09:21:32.059] [Touch] touch_f54_func is not executed
- [ 1739.143203 / 01-28 09:21:32.059] [Touch] touch power off
- [ 1739.158396 / 01-28 09:21:32.069] [Touch] touch_suspend
- [ 1739.158404 / 01-28 09:21:32.069] mdss_dsi_blank+:
- [ 1739.158416 / 01-28 09:21:32.069] mdss_dsi_panel_off: ctrl=d7931010 ndx=0
- [ 1739.175979 / 01-28 09:21:32.089] [Zee][OLED] mipi_dsi_tx(0xEA) start (target delay=32ms)
- [ 1739.208007 / 01-28 09:21:32.119] [Zee][OLED] mipi_dsi_tx(0xEA) finish (target delay=32ms)
- [ 1739.226116 / 01-28 09:21:32.139] [Zee][OLED] mipi_dsi_tx(0x28) start (target delay=32ms)
- [ 1739.258143 / 01-28 09:21:32.169] [Zee][OLED] mipi_dsi_tx(0x28) finish (target delay=32ms)
- [ 1739.276253 / 01-28 09:21:32.189] [Zee][OLED] mipi_dsi_tx(0xEF) start (target delay=16ms)
- [ 1739.288538 / 01-28 09:21:32.199] [Zee][OLED] mipi_dsi_tx(0xEF) finish (target delay=16ms)
- [ 1739.309678 / 01-28 09:21:32.219] [Zee][OLED] mipi_dsi_tx(0xE6) start (target delay=16ms)
- [ 1739.325708 / 01-28 09:21:32.239] [Zee][OLED] mipi_dsi_tx(0xE6) finish (target delay=16ms)
- [ 1739.343103 / 01-28 09:21:32.259] [Zee][OLED] mipi_dsi_tx(0x10) start (target delay=136ms)
- [ 1739.479131 / 01-28 09:21:32.389] [Zee][OLED] mipi_dsi_tx(0x10) finish (target delay=136ms)
- [ 1739.479142 / 01-28 09:21:32.389] [Zee][OLED] mdss_dsi_panel_off success
- [ 1739.598409 / 01-28 09:21:32.509] [Zee][OLED] mdss_dsi_panel_power off
- [ 1739.598417 / 01-28 09:21:32.509] [Touch] lcd_notifier_callback: event = 4
- [ 1739.599303 / 01-28 09:21:32.509] [LP5521] [lp5521_shutdown] start
- [ 1739.601958 / 01-28 09:21:32.509] [LP5521] [lp5521_run_led_pattern] PATTERN_PLAY_OFF
- [ 1739.601991 / 01-28 09:21:32.509] [LP5521] [lp5521_set_brightness] brightness : 0
- [ 1739.602550 / 01-28 09:21:32.509] [LP5521] LP5521: [lp5521_enable] state = 0
- [ 1739.602571 / 01-28 09:21:32.509] [LP5521] LP5521: [lp5521_enable] RGB_EN(gpio #407) set to LOW
- [ 1739.602580 / 01-28 09:21:32.509] [LP5521] [lp5521_shutdown] complete
- [ 1739.602710 / 01-28 09:21:32.509] uei_irrc_shutdown
- [ 1739.602979 / 01-28 09:21:32.509] Restarting system.
- [ 1739.603000 / 01-28 09:21:32.509] Going down for restart now
- [ 1739.603662 / 01-28 09:21:32.509] Calling SCM to disable SPMI PMIC arbiter
- No errors detected
- UTS_VERSION
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement