Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 6.6 2017-11-05 r4594 [x86_64-linux-4.13.12-1-ARCH] (local build)
- Copyright (C) 2002-17, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Device Model: LITEON L8H-256V2G-41 M.2 2280 256GB SED
- Serial Number: TW0PV3P455085668H3EB
- Firmware Version: 388410D
- User Capacity: 256,060,514,304 bytes [256 GB]
- Sector Size: 512 bytes logical/physical
- Rotation Rate: Solid State Device
- Form Factor: M.2
- Device is: Not in smartctl database [for details use: -P showall]
- ATA Version is: ACS-2 (minor revision not indicated)
- SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
- Local Time is: Sat Nov 25 14:07:32 2017 -03
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM level is: 128 (quiet), recommended: 254
- APM feature is: Unavailable
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- DSN feature is: Unavailable
- ATA Security is: Disabled, frozen [SEC2]
- Write SCT (Get) Feature Control Command failed: scsi error badly formed scsi parameters
- Wt Cache Reorder: Unknown (SCT Feature Control command failed)
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x02) Offline data collection activity
- was completed without error.
- Auto Offline Data Collection: Disabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 0) seconds.
- Offline data collection
- capabilities: (0x11) SMART execute Offline immediate.
- No Auto Offline data collection support.
- Suspend Offline collection upon new
- command.
- No Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- No Selective Self-test supported.
- SMART capabilities: (0x0002) Does not save SMART data before
- entering power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 10) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 1
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 5 Reallocated_Sector_Ct PO---- 100 100 000 - 0
- 9 Power_On_Hours -O---- 100 100 000 - 778
- 12 Power_Cycle_Count PO---- 100 100 000 - 387
- 175 Program_Fail_Count_Chip PO---- 100 100 000 - 0
- 176 Erase_Fail_Count_Chip PO---- 100 100 000 - 0
- 177 Wear_Leveling_Count PO---- 100 100 000 - 11
- 178 Used_Rsvd_Blk_Cnt_Chip PO---- 100 100 000 - 0
- 179 Used_Rsvd_Blk_Cnt_Tot PO---- 100 100 000 - 0
- 180 Unused_Rsvd_Blk_Cnt_Tot PO---- 100 100 000 - 149
- 181 Program_Fail_Cnt_Total PO---- 100 100 000 - 0
- 182 Erase_Fail_Count_Total PO---- 100 100 000 - 0
- 187 Reported_Uncorrect PO---- 100 100 000 - 0
- 195 Hardware_ECC_Recovered PO---- 100 100 000 - 0
- 241 Total_LBAs_Written PO---- 100 100 000 - 54672
- 242 Total_LBAs_Read PO---- 100 100 000 - 59737
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 GPL,SL R/O 1 Summary SMART error log
- 0x02 GPL,SL R/O 1 Comprehensive SMART error log
- 0x03 GPL,SL R/O 1 Ext. Comprehensive SMART error log
- 0x04 GPL,SL R/O 8 Device Statistics log
- 0x06 GPL,SL R/O 1 SMART self-test log
- 0x07 GPL,SL R/O 1 Extended self-test log
- 0x09 GPL,SL R/W 1 Selective self-test log
- 0x10 GPL,SL R/O 1 NCQ Command Error log
- 0x11 GPL,SL R/O 1 SATA Phy Event Counters log
- 0x30 GPL,SL R/O 9 IDENTIFY DEVICE data log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
- No Errors Logged
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Extended offline Completed without error 00% 778 -
- # 2 Short offline Completed without error 00% 778 -
- # 3 Extended offline Completed without error 00% 778 -
- # 4 Extended offline Interrupted (host reset) 90% 775 -
- # 5 Short offline Completed without error 00% 775 -
- # 6 Short offline Completed without error 00% 775 -
- # 7 Short offline Completed without error 00% 743 -
- # 8 Short offline Completed without error 00% 743 -
- # 9 Extended offline Completed without error 00% 267 -
- #10 Short offline Completed without error 00% 267 -
- #11 Short offline Completed without error 00% 220 -
- #12 Short offline Completed without error 00% 17 -
- #13 Short offline Completed without error 00% 1 -
- #14 Short offline Completed without error 00% 1 -
- #15 Short offline Completed without error 00% 1 -
- #16 Short offline Completed without error 00% 0 -
- #17 Short offline Completed without error 00% 0 -
- Selective Self-tests/Logging not supported
- SCT Status Version: 3
- SCT Version (vendor specific): 0 (0x0000)
- SCT Support Level: 0
- Device State: Active (0)
- Current Temperature: 0 Celsius
- Power Cycle Max Temperature: 0 Celsius
- Lifetime Max Temperature: 0 Celsius
- SCT Temperature History Version: 2
- Temperature Sampling Period: 0 minutes
- Temperature Logging Interval: 0 minutes
- Min/Max recommended Temperature: 0/100 Celsius
- Min/Max Temperature Limit: 0/100 Celsius
- Temperature History Size (Index): 128 (0)
- Index Estimated Time Temperature Celsius
- 1 2017-11-25 12:00 ? -
- ... ..(126 skipped). .. -
- 0 2017-11-25 14:07 ? -
- SCT Error Recovery Control:
- Read: Disabled
- Write: Disabled
- Device Statistics (GP Log 0x04)
- Page Offset Size Value Flags Description
- 0x01 ===== = = === == General Statistics (rev 2) ==
- 0x01 0x008 4 387 --- Lifetime Power-On Resets
- 0x01 0x010 4 778 --- Power-on Hours
- 0x01 0x018 6 3583021713 --- Logical Sectors Written
- 0x01 0x020 6 43151135 --- Number of Write Commands
- 0x01 0x028 6 3914970912 --- Logical Sectors Read
- 0x01 0x030 6 24945711 --- Number of Read Commands
- 0x02 ===== = = === == Free-Fall Statistics (empty) ==
- 0x03 ===== = = === == Rotating Media Statistics (empty) ==
- 0x04 ===== = = === == General Errors Statistics (rev 1) ==
- 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
- 0x04 0x010 4 74 --- Resets Between Cmd Acceptance and Completion
- 0x05 ===== = = === == Temperature Statistics (rev 1) ==
- 0x05 0x008 1 55 --- Current Temperature
- 0x06 ===== = = === == Transport Statistics (rev 1) ==
- 0x06 0x008 4 1311 --- Number of Hardware Resets
- 0x06 0x018 4 11 --- Number of Interface CRC Errors
- 0x07 ===== = = === == Solid State Device Statistics (rev 1) ==
- 0x07 0x008 1 0 --- Percentage Used Endurance Indicator
- |||_ C monitored condition met
- ||__ D supports DSN
- |___ N normalized value
- Pending Defects log (GP Log 0x0c) not supported
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0008 2 0 Device-to-host non-data FIS retries
- 0x0009 2 0 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000d 2 0 Non-CRC errors within host-to-device FIS
- 0x000f 2 0 R_ERR response for host-to-device data FIS, CRC
- 0x0010 2 0 R_ERR response for host-to-device data FIS, non-CRC
- 0x0012 2 0 R_ERR response for host-to-device non-data FIS, CRC
- 0x0013 2 0 R_ERR response for host-to-device non-data FIS, non-CRC
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement