Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-34squeeze1) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Wed May 18 23:13:22 UTC 2011
- [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=f4032983-e519-47c3-8026-54809c4cf727 ro quiet
- [ 0.000000] KERNEL supported cpus:
- [ 0.000000] Intel GenuineIntel
- [ 0.000000] AMD AuthenticAMD
- [ 0.000000] Centaur CentaurHauls
- [ 0.000000] BIOS-provided physical RAM map:
- [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009dc00 (usable)
- [ 0.000000] BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved)
- [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
- [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cff80000 (usable)
- [ 0.000000] BIOS-e820: 00000000cff80000 - 00000000cff8e000 (ACPI data)
- [ 0.000000] BIOS-e820: 00000000cff8e000 - 00000000cffe0000 (ACPI NVS)
- [ 0.000000] BIOS-e820: 00000000cffe0000 - 00000000d0000000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
- [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
- [ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
- [ 0.000000] DMI 2.4 present.
- [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it.
- [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
- [ 0.000000] MTRR default type: uncachable
- [ 0.000000] MTRR fixed ranges enabled:
- [ 0.000000] 00000-9FFFF write-back
- [ 0.000000] A0000-BFFFF uncachable
- [ 0.000000] C0000-DFFFF write-protect
- [ 0.000000] E0000-EFFFF write-through
- [ 0.000000] F0000-FFFFF write-protect
- [ 0.000000] MTRR variable ranges enabled:
- [ 0.000000] 0 base 0D0000000 mask FF0000000 uncachable
- [ 0.000000] 1 base 0E0000000 mask FE0000000 uncachable
- [ 0.000000] 2 base 000000000 mask F00000000 write-back
- [ 0.000000] 3 base 100000000 mask FE0000000 write-back
- [ 0.000000] 4 base 120000000 mask FF0000000 write-back
- [ 0.000000] 5 disabled
- [ 0.000000] 6 disabled
- [ 0.000000] 7 disabled
- [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
- [ 0.000000] e820 update range: 00000000d0000000 - 0000000100000000 (usable) ==> (reserved)
- [ 0.000000] last_pfn = 0xcff80 max_arch_pfn = 0x400000000
- [ 0.000000] initial memory mapped : 0 - 20000000
- [ 0.000000] init_memory_mapping: 0000000000000000-00000000cff80000
- [ 0.000000] 0000000000 - 00cfe00000 page 2M
- [ 0.000000] 00cfe00000 - 00cff80000 page 4k
- [ 0.000000] kernel direct mapping tables up to cff80000 @ 10000-16000
- [ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
- [ 0.000000] 0100000000 - 0130000000 page 2M
- [ 0.000000] kernel direct mapping tables up to 130000000 @ 14000-1a000
- [ 0.000000] RAMDISK: 376e3000 - 37fefe7c
- [ 0.000000] ACPI: RSDP 00000000000fbc10 00014 (v00 ACPIAM)
- [ 0.000000] ACPI: RSDT 00000000cff80000 0003C (v01 A_M_I_ OEMRSDT 03000818 MSFT 00000097)
- [ 0.000000] ACPI: FACP 00000000cff80200 00084 (v02 A_M_I_ OEMFACP 03000818 MSFT 00000097)
- [ 0.000000] ACPI: DSDT 00000000cff80440 08B31 (v01 A0992 A0992010 00000010 INTL 20060113)
- [ 0.000000] ACPI: FACS 00000000cff8e000 00040
- [ 0.000000] ACPI: APIC 00000000cff80390 0006C (v01 A_M_I_ OEMAPIC 03000818 MSFT 00000097)
- [ 0.000000] ACPI: MCFG 00000000cff80400 0003C (v01 A_M_I_ OEMMCFG 03000818 MSFT 00000097)
- [ 0.000000] ACPI: OEMB 00000000cff8e040 00081 (v01 A_M_I_ AMI_OEM 03000818 MSFT 00000097)
- [ 0.000000] ACPI: HPET 00000000cff88f80 00038 (v01 A_M_I_ OEMHPET 03000818 MSFT 00000097)
- [ 0.000000] ACPI: OSFR 00000000cff88fc0 000B0 (v01 A_M_I_ OEMOSFR 03000818 MSFT 00000097)
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] No NUMA configuration found
- [ 0.000000] Faking a node at 0000000000000000-0000000130000000
- [ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000
- [ 0.000000] NODE_DATA [0000000000015000 - 000000000001cfff]
- [ 0.000000] bootmap [000000000001d000 - 0000000000042fff] pages 26
- [ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000]
- [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
- [ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
- [ 0.000000] #2 [0001000000 - 000168c454] TEXT DATA BSS ==> [0001000000 - 000168c454]
- [ 0.000000] #3 [00376e3000 - 0037fefe7c] RAMDISK ==> [00376e3000 - 0037fefe7c]
- [ 0.000000] #4 [000009dc00 - 0000100000] BIOS reserved ==> [000009dc00 - 0000100000]
- [ 0.000000] #5 [000168d000 - 000168d280] BRK ==> [000168d000 - 000168d280]
- [ 0.000000] #6 [0000010000 - 0000014000] PGTABLE ==> [0000010000 - 0000014000]
- [ 0.000000] #7 [0000014000 - 0000015000] PGTABLE ==> [0000014000 - 0000015000]
- [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780
- [ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880001800000-ffff8800051fffff] on node 0
- [ 0.000000] Zone PFN ranges:
- [ 0.000000] DMA 0x00000010 -> 0x00001000
- [ 0.000000] DMA32 0x00001000 -> 0x00100000
- [ 0.000000] Normal 0x00100000 -> 0x00130000
- [ 0.000000] Movable zone start PFN for each node
- [ 0.000000] early_node_map[3] active PFN ranges
- [ 0.000000] 0: 0x00000010 -> 0x0000009d
- [ 0.000000] 0: 0x00000100 -> 0x000cff80
- [ 0.000000] 0: 0x00100000 -> 0x00130000
- [ 0.000000] On node 0 totalpages: 1048333
- [ 0.000000] DMA zone: 56 pages used for memmap
- [ 0.000000] DMA zone: 106 pages reserved
- [ 0.000000] DMA zone: 3819 pages, LIFO batch:0
- [ 0.000000] DMA32 zone: 14280 pages used for memmap
- [ 0.000000] DMA32 zone: 833464 pages, LIFO batch:31
- [ 0.000000] Normal zone: 2688 pages used for memmap
- [ 0.000000] Normal zone: 193920 pages, LIFO batch:31
- [ 0.000000] ACPI: PM-Timer IO Port: 0x808
- [ 0.000000] ACPI: Local APIC address 0xfee00000
- [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
- [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
- [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
- [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
- [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
- [ 0.000000] ACPI: IRQ0 used by override.
- [ 0.000000] ACPI: IRQ2 used by override.
- [ 0.000000] ACPI: IRQ9 used by override.
- [ 0.000000] Using ACPI (MADT) for SMP configuration information
- [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
- [ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
- [ 0.000000] nr_irqs_gsi: 24
- [ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
- [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
- [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
- [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
- [ 0.000000] PM: Registered nosave memory: 00000000cff80000 - 00000000cff8e000
- [ 0.000000] PM: Registered nosave memory: 00000000cff8e000 - 00000000cffe0000
- [ 0.000000] PM: Registered nosave memory: 00000000cffe0000 - 00000000d0000000
- [ 0.000000] PM: Registered nosave memory: 00000000d0000000 - 00000000fee00000
- [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
- [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000fff00000
- [ 0.000000] PM: Registered nosave memory: 00000000fff00000 - 0000000100000000
- [ 0.000000] Allocating PCI resources starting at d0000000 (gap: d0000000:2ee00000)
- [ 0.000000] Booting paravirtualized kernel on bare hardware
- [ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
- [ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005400000 s90328 r8192 d24360 u524288
- [ 0.000000] pcpu-alloc: s90328 r8192 d24360 u524288 alloc=1*2097152
- [ 0.000000] pcpu-alloc: [0] 0 1 2 3
- [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1031203
- [ 0.000000] Policy zone: Normal
- [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=f4032983-e519-47c3-8026-54809c4cf727 ro quiet
- [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
- [ 0.000000] Initializing CPU#0
- [ 0.000000] Checking aperture...
- [ 0.000000] No AGP bridge found
- [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
- [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
- [ 0.000000] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
- [ 0.000000] Placing 64MB software IO TLB between ffff88000559e000 - ffff88000959e000
- [ 0.000000] software IO TLB at phys 0x559e000 - 0x959e000
- [ 0.000000] Memory: 4051104k/4980736k available (3081k kernel code, 787404k absent, 142228k reserved, 1898k data, 592k init)
- [ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
- [ 0.000000] Hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:4352 nr_irqs:440
- [ 0.000000] Console: colour VGA+ 80x25
- [ 0.000000] console [tty0] enabled
- [ 0.000000] hpet clockevent registered
- [ 0.000000] Fast TSC calibration using PIT
- [ 0.000000] Detected 2671.522 MHz processor.
- [ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 5343.04 BogoMIPS (lpj=10686088)
- [ 0.004021] Security Framework initialized
- [ 0.004026] SELinux: Disabled at boot.
- [ 0.004303] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
- [ 0.006052] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
- [ 0.008419] Mount-cache hash table entries: 256
- [ 0.008547] Initializing cgroup subsys ns
- [ 0.008550] Initializing cgroup subsys cpuacct
- [ 0.008554] Initializing cgroup subsys devices
- [ 0.008555] Initializing cgroup subsys freezer
- [ 0.008557] Initializing cgroup subsys net_cls
- [ 0.008580] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.008582] CPU: L2 cache: 3072K
- [ 0.008585] CPU 0/0x0 -> Node 0
- [ 0.008587] CPU: Physical Processor ID: 0
- [ 0.008588] CPU: Processor Core ID: 0
- [ 0.008591] mce: CPU supports 6 MCE banks
- [ 0.008597] CPU0: Thermal monitoring enabled (TM2)
- [ 0.008601] Performance Events: Core2 events, Intel PMU driver.
- [ 0.008606] ... version: 2
- [ 0.008607] ... bit width: 40
- [ 0.008608] ... generic registers: 2
- [ 0.008609] ... value mask: 000000ffffffffff
- [ 0.008611] ... max period: 000000007fffffff
- [ 0.008612] ... fixed-purpose events: 3
- [ 0.008613] ... event mask: 0000000700000003
- [ 0.009456] ACPI: Core revision 20090903
- [ 0.016576] Setting APIC routing to flat
- [ 0.016871] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
- [ 0.056557] CPU0: Intel 06/17 stepping 0a
- [ 0.060001] Booting processor 1 APIC 0x1 ip 0x6000
- [ 0.008000] Initializing CPU#1
- [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.008000] CPU: L2 cache: 3072K
- [ 0.008000] CPU 1/0x1 -> Node 0
- [ 0.008000] CPU: Physical Processor ID: 0
- [ 0.008000] CPU: Processor Core ID: 1
- [ 0.008000] CPU1: Thermal monitoring enabled (TM2)
- [ 0.144071] CPU1: Intel 06/17 stepping 0a
- [ 0.144076] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
- [ 0.148094] Booting processor 2 APIC 0x2 ip 0x6000
- [ 0.008000] Initializing CPU#2
- [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.008000] CPU: L2 cache: 3072K
- [ 0.008000] CPU 2/0x2 -> Node 0
- [ 0.008000] CPU: Physical Processor ID: 0
- [ 0.008000] CPU: Processor Core ID: 2
- [ 0.008000] CPU2: Thermal monitoring enabled (TM2)
- [ 0.236112] CPU2: Intel 06/17 stepping 0a
- [ 0.236117] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
- [ 0.240063] Booting processor 3 APIC 0x3 ip 0x6000
- [ 0.008000] Initializing CPU#3
- [ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 32K
- [ 0.008000] CPU: L2 cache: 3072K
- [ 0.008000] CPU 3/0x3 -> Node 0
- [ 0.008000] CPU: Physical Processor ID: 0
- [ 0.008000] CPU: Processor Core ID: 3
- [ 0.008000] CPU3: Thermal monitoring enabled (TM2)
- [ 0.328054] CPU3: Intel 06/17 stepping 0a
- [ 0.328060] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
- [ 0.332011] Brought up 4 CPUs
- [ 0.332014] Total of 4 processors activated (21390.34 BogoMIPS).
- [ 0.333884] CPU0 attaching sched-domain:
- [ 0.333887] domain 0: span 0-1 level MC
- [ 0.333889] groups: 0 1
- [ 0.333892] domain 1: span 0-3 level CPU
- [ 0.333894] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048)
- [ 0.333900] CPU1 attaching sched-domain:
- [ 0.333902] domain 0: span 0-1 level MC
- [ 0.333903] groups: 1 0
- [ 0.333906] domain 1: span 0-3 level CPU
- [ 0.333908] groups: 0-1 (cpu_power = 2048) 2-3 (cpu_power = 2048)
- [ 0.333912] CPU2 attaching sched-domain:
- [ 0.333914] domain 0: span 2-3 level MC
- [ 0.333915] groups: 2 3
- [ 0.333918] domain 1: span 0-3 level CPU
- [ 0.333920] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048)
- [ 0.333924] CPU3 attaching sched-domain:
- [ 0.333926] domain 0: span 2-3 level MC
- [ 0.333927] groups: 3 2
- [ 0.333930] domain 1: span 0-3 level CPU
- [ 0.333932] groups: 2-3 (cpu_power = 2048) 0-1 (cpu_power = 2048)
- [ 0.334032] devtmpfs: initialized
- [ 0.336640] regulator: core version 0.5
- [ 0.336640] NET: Registered protocol family 16
- [ 0.336640] ACPI: bus type pci registered
- [ 0.336640] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- [ 0.336640] PCI: Not using MMCONFIG.
- [ 0.336640] PCI: Using configuration type 1 for base access
- [ 0.336640] bio: create slab <bio-0> at 0
- [ 0.336640] ACPI: EC: Look up EC in DSDT
- [ 0.340399] ACPI: Executed 1 blocks of module-level executable AML code
- [ 0.348678] ACPI: Interpreter enabled
- [ 0.348680] ACPI: (supports S0 S1 S3 S4 S5)
- [ 0.348703] ACPI: Using IOAPIC for interrupt routing
- [ 0.348745] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
- [ 0.350609] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
- [ 0.359331] PCI: Using MMCONFIG at e0000000 - efffffff
- [ 0.365588] ACPI Warning: Incorrect checksum in table [OEMB] - 7B, should be 7A (20090903/tbutils-314)
- [ 0.365696] ACPI: No dock devices found.
- [ 0.365791] ACPI: PCI Root Bridge [PCI0] (0000:00)
- [ 0.365867] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
- [ 0.365869] pci 0000:00:01.0: PME# disabled
- [ 0.365923] pci 0000:00:1a.0: reg 20 io port: [0xa800-0xa81f]
- [ 0.365977] pci 0000:00:1a.1: reg 20 io port: [0xa880-0xa89f]
- [ 0.366031] pci 0000:00:1a.2: reg 20 io port: [0xac00-0xac1f]
- [ 0.366088] pci 0000:00:1a.7: reg 10 32bit mmio: [0xf9fffc00-0xf9ffffff]
- [ 0.366132] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
- [ 0.366135] pci 0000:00:1a.7: PME# disabled
- [ 0.366167] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf9ff8000-0xf9ffbfff]
- [ 0.366198] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
- [ 0.366201] pci 0000:00:1b.0: PME# disabled
- [ 0.366250] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
- [ 0.366253] pci 0000:00:1c.0: PME# disabled
- [ 0.366304] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
- [ 0.366307] pci 0000:00:1c.4: PME# disabled
- [ 0.366355] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
- [ 0.366358] pci 0000:00:1c.5: PME# disabled
- [ 0.366400] pci 0000:00:1d.0: reg 20 io port: [0xa080-0xa09f]
- [ 0.366454] pci 0000:00:1d.1: reg 20 io port: [0xa400-0xa41f]
- [ 0.366508] pci 0000:00:1d.2: reg 20 io port: [0xa480-0xa49f]
- [ 0.366565] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf9fff800-0xf9fffbff]
- [ 0.366609] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
- [ 0.366613] pci 0000:00:1d.7: PME# disabled
- [ 0.366715] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
- [ 0.366759] pci 0000:00:1f.2: reg 10 io port: [0x9000-0x9007]
- [ 0.366763] pci 0000:00:1f.2: reg 14 io port: [0x8c00-0x8c03]
- [ 0.366768] pci 0000:00:1f.2: reg 18 io port: [0x8880-0x8887]
- [ 0.366772] pci 0000:00:1f.2: reg 1c io port: [0x8800-0x8803]
- [ 0.366776] pci 0000:00:1f.2: reg 20 io port: [0x8480-0x848f]
- [ 0.366781] pci 0000:00:1f.2: reg 24 io port: [0x8400-0x840f]
- [ 0.366816] pci 0000:00:1f.3: reg 10 64bit mmio: [0xf9fff400-0xf9fff4ff]
- [ 0.366826] pci 0000:00:1f.3: reg 20 io port: [0x400-0x41f]
- [ 0.366859] pci 0000:00:1f.5: reg 10 io port: [0xa000-0xa007]
- [ 0.366863] pci 0000:00:1f.5: reg 14 io port: [0x9c00-0x9c03]
- [ 0.366868] pci 0000:00:1f.5: reg 18 io port: [0x9880-0x9887]
- [ 0.366872] pci 0000:00:1f.5: reg 1c io port: [0x9800-0x9803]
- [ 0.366877] pci 0000:00:1f.5: reg 20 io port: [0x9480-0x948f]
- [ 0.366881] pci 0000:00:1f.5: reg 24 io port: [0x9400-0x940f]
- [ 0.366925] pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
- [ 0.366932] pci 0000:01:00.0: reg 14 64bit mmio pref: [0xd0000000-0xdfffffff]
- [ 0.366939] pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
- [ 0.366943] pci 0000:01:00.0: reg 24 io port: [0xbc00-0xbc7f]
- [ 0.366948] pci 0000:01:00.0: reg 30 32bit mmio pref: [0xfe8e0000-0xfe8fffff]
- [ 0.367035] pci 0000:00:01.0: bridge io port: [0xb000-0xbfff]
- [ 0.367038] pci 0000:00:01.0: bridge 32bit mmio: [0xfa000000-0xfe8fffff]
- [ 0.367041] pci 0000:00:01.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
- [ 0.367075] pci 0000:00:1c.0: bridge 64bit mmio pref: [0xf8f00000-0xf8ffffff]
- [ 0.367113] pci 0000:03:00.0: reg 10 io port: [0xdc00-0xdc07]
- [ 0.367120] pci 0000:03:00.0: reg 14 io port: [0xd880-0xd883]
- [ 0.367126] pci 0000:03:00.0: reg 18 io port: [0xd800-0xd807]
- [ 0.367133] pci 0000:03:00.0: reg 1c io port: [0xd480-0xd483]
- [ 0.367139] pci 0000:03:00.0: reg 20 io port: [0xd400-0xd40f]
- [ 0.367146] pci 0000:03:00.0: reg 24 32bit mmio: [0xfeaffc00-0xfeaffdff]
- [ 0.367180] pci 0000:03:00.0: supports D1
- [ 0.367182] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
- [ 0.367186] pci 0000:03:00.0: PME# disabled
- [ 0.367209] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
- [ 0.367259] pci 0000:00:1c.4: bridge io port: [0xd000-0xdfff]
- [ 0.367262] pci 0000:00:1c.4: bridge 32bit mmio: [0xfea00000-0xfeafffff]
- [ 0.367314] pci 0000:02:00.0: reg 10 64bit mmio: [0xfe9fc000-0xfe9fffff]
- [ 0.367321] pci 0000:02:00.0: reg 18 io port: [0xc800-0xc8ff]
- [ 0.367344] pci 0000:02:00.0: reg 30 32bit mmio pref: [0xfe9c0000-0xfe9dffff]
- [ 0.367378] pci 0000:02:00.0: supports D1 D2
- [ 0.367379] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
- [ 0.367383] pci 0000:02:00.0: PME# disabled
- [ 0.372081] pci 0000:00:1c.5: bridge io port: [0xc000-0xcfff]
- [ 0.372084] pci 0000:00:1c.5: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
- [ 0.372120] pci 0000:05:02.0: reg 10 io port: [0xec00-0xec1f]
- [ 0.372161] pci 0000:05:02.0: supports D1 D2
- [ 0.372202] pci 0000:05:03.0: reg 10 32bit mmio: [0xfebff800-0xfebfffff]
- [ 0.372208] pci 0000:05:03.0: reg 14 io port: [0xe880-0xe8ff]
- [ 0.372244] pci 0000:05:03.0: supports D2
- [ 0.372245] pci 0000:05:03.0: PME# supported from D2 D3hot D3cold
- [ 0.372249] pci 0000:05:03.0: PME# disabled
- [ 0.372287] pci 0000:00:1e.0: transparent bridge
- [ 0.372289] pci 0000:00:1e.0: bridge io port: [0xe000-0xefff]
- [ 0.372292] pci 0000:00:1e.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
- [ 0.372313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
- [ 0.372418] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
- [ 0.372462] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
- [ 0.372542] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
- [ 0.372585] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
- [ 0.372647] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
- [ 0.386315] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
- [ 0.386403] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
- [ 0.386489] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
- [ 0.386574] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 *14 15)
- [ 0.386660] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
- [ 0.386746] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 5 6 7 10 11 12 14 15)
- [ 0.386832] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 *15)
- [ 0.386918] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
- [ 0.387010] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
- [ 0.387014] vgaarb: loaded
- [ 0.387026] PCI: Using ACPI for IRQ routing
- [ 0.387026] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
- [ 0.387026] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
- [ 0.387026] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
- [ 0.396021] Switching to clocksource tsc
- [ 0.397049] pnp: PnP ACPI init
- [ 0.397067] ACPI: bus type pnp registered
- [ 0.399297] pnp: PnP ACPI: found 15 devices
- [ 0.399298] ACPI: ACPI bus type pnp unregistered
- [ 0.399307] system 00:01: iomem range 0xfed14000-0xfed19fff has been reserved
- [ 0.399313] system 00:06: ioport range 0x290-0x297 has been reserved
- [ 0.399317] system 00:07: ioport range 0x4d0-0x4d1 has been reserved
- [ 0.399319] system 00:07: ioport range 0x800-0x87f has been reserved
- [ 0.399321] system 00:07: ioport range 0x480-0x4bf has been reserved
- [ 0.399324] system 00:07: iomem range 0xfed1c000-0xfed1ffff has been reserved
- [ 0.399326] system 00:07: iomem range 0xfed20000-0xfed3ffff has been reserved
- [ 0.399329] system 00:07: iomem range 0xfed50000-0xfed8ffff has been reserved
- [ 0.399331] system 00:07: iomem range 0xffa00000-0xffafffff has been reserved
- [ 0.399333] system 00:07: iomem range 0xffb00000-0xffbfffff has been reserved
- [ 0.399335] system 00:07: iomem range 0xffe00000-0xffefffff has been reserved
- [ 0.399338] system 00:07: iomem range 0xfff00000-0xfffffffe has been reserved
- [ 0.399345] system 00:0a: iomem range 0xfec00000-0xfec00fff could not be reserved
- [ 0.399347] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved
- [ 0.399352] system 00:0d: iomem range 0xe0000000-0xefffffff has been reserved
- [ 0.399356] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
- [ 0.399358] system 00:0e: iomem range 0xc0000-0xcffff has been reserved
- [ 0.399360] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
- [ 0.399362] system 00:0e: iomem range 0x100000-0xcfffffff could not be reserved
- [ 0.404176] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
- [ 0.404179] pci 0000:00:01.0: IO window: 0xb000-0xbfff
- [ 0.404182] pci 0000:00:01.0: MEM window: 0xfa000000-0xfe8fffff
- [ 0.404184] pci 0000:00:01.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
- [ 0.404188] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:04
- [ 0.404190] pci 0000:00:1c.0: IO window: 0x1000-0x1fff
- [ 0.404194] pci 0000:00:1c.0: MEM window: 0xf0000000-0xf03fffff
- [ 0.404197] pci 0000:00:1c.0: PREFETCH window: 0x000000f8f00000-0x000000f8ffffff
- [ 0.404201] pci 0000:00:1c.4: PCI bridge, secondary bus 0000:03
- [ 0.404204] pci 0000:00:1c.4: IO window: 0xd000-0xdfff
- [ 0.404207] pci 0000:00:1c.4: MEM window: 0xfea00000-0xfeafffff
- [ 0.404211] pci 0000:00:1c.4: PREFETCH window: 0x000000f0400000-0x000000f05fffff
- [ 0.404215] pci 0000:00:1c.5: PCI bridge, secondary bus 0000:02
- [ 0.404218] pci 0000:00:1c.5: IO window: 0xc000-0xcfff
- [ 0.404221] pci 0000:00:1c.5: MEM window: 0xfe900000-0xfe9fffff
- [ 0.404224] pci 0000:00:1c.5: PREFETCH window: 0x000000f0600000-0x000000f07fffff
- [ 0.404229] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:05
- [ 0.404231] pci 0000:00:1e.0: IO window: 0xe000-0xefff
- [ 0.404235] pci 0000:00:1e.0: MEM window: 0xfeb00000-0xfebfffff
- [ 0.404238] pci 0000:00:1e.0: PREFETCH window: disabled
- [ 0.404248] alloc irq_desc for 16 on node -1
- [ 0.404252] alloc kstat_irqs on node -1
- [ 0.404258] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.404261] pci 0000:00:01.0: setting latency timer to 64
- [ 0.404266] pci 0000:00:1c.0: enabling device (0106 -> 0107)
- [ 0.404269] alloc irq_desc for 17 on node -1
- [ 0.404270] alloc kstat_irqs on node -1
- [ 0.404273] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 0.404276] pci 0000:00:1c.0: setting latency timer to 64
- [ 0.404282] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 0.404285] pci 0000:00:1c.4: setting latency timer to 64
- [ 0.404291] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
- [ 0.404294] pci 0000:00:1c.5: setting latency timer to 64
- [ 0.404299] pci 0000:00:1e.0: setting latency timer to 64
- [ 0.404302] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
- [ 0.404304] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
- [ 0.404306] pci_bus 0000:01: resource 0 io: [0xb000-0xbfff]
- [ 0.404308] pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfe8fffff]
- [ 0.404310] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
- [ 0.404312] pci_bus 0000:04: resource 0 io: [0x1000-0x1fff]
- [ 0.404314] pci_bus 0000:04: resource 1 mem: [0xf0000000-0xf03fffff]
- [ 0.404316] pci_bus 0000:04: resource 2 pref mem [0xf8f00000-0xf8ffffff]
- [ 0.404317] pci_bus 0000:03: resource 0 io: [0xd000-0xdfff]
- [ 0.404319] pci_bus 0000:03: resource 1 mem: [0xfea00000-0xfeafffff]
- [ 0.404321] pci_bus 0000:03: resource 2 pref mem [0xf0400000-0xf05fffff]
- [ 0.404323] pci_bus 0000:02: resource 0 io: [0xc000-0xcfff]
- [ 0.404325] pci_bus 0000:02: resource 1 mem: [0xfe900000-0xfe9fffff]
- [ 0.404327] pci_bus 0000:02: resource 2 pref mem [0xf0600000-0xf07fffff]
- [ 0.404328] pci_bus 0000:05: resource 0 io: [0xe000-0xefff]
- [ 0.404330] pci_bus 0000:05: resource 1 mem: [0xfeb00000-0xfebfffff]
- [ 0.404332] pci_bus 0000:05: resource 3 io: [0x00-0xffff]
- [ 0.404334] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
- [ 0.404359] NET: Registered protocol family 2
- [ 0.404498] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.405353] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
- [ 0.408575] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
- [ 0.409008] TCP: Hash tables configured (established 524288 bind 65536)
- [ 0.409010] TCP reno registered
- [ 0.409114] NET: Registered protocol family 1
- [ 0.409276] pci 0000:01:00.0: Boot video device
- [ 0.409338] Unpacking initramfs...
- [ 0.580149] Freeing initrd memory: 9267k freed
- [ 0.583169] audit: initializing netlink socket (disabled)
- [ 0.583182] type=2000 audit(1310580916.579:1): initialized
- [ 0.585815] HugeTLB registered 2 MB page size, pre-allocated 0 pages
- [ 0.587021] VFS: Disk quotas dquot_6.5.2
- [ 0.587060] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
- [ 0.587127] msgmni has been set to 7930
- [ 0.587456] alg: No test for stdrng (krng)
- [ 0.587507] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.587510] io scheduler noop registered
- [ 0.587511] io scheduler anticipatory registered
- [ 0.587512] io scheduler deadline registered
- [ 0.587538] io scheduler cfq registered (default)
- [ 0.587638] alloc irq_desc for 24 on node -1
- [ 0.587640] alloc kstat_irqs on node -1
- [ 0.587648] pcieport 0000:00:01.0: irq 24 for MSI/MSI-X
- [ 0.587653] pcieport 0000:00:01.0: setting latency timer to 64
- [ 0.587722] alloc irq_desc for 25 on node -1
- [ 0.587723] alloc kstat_irqs on node -1
- [ 0.587728] pcieport 0000:00:1c.0: irq 25 for MSI/MSI-X
- [ 0.587734] pcieport 0000:00:1c.0: setting latency timer to 64
- [ 0.587819] alloc irq_desc for 26 on node -1
- [ 0.587821] alloc kstat_irqs on node -1
- [ 0.587826] pcieport 0000:00:1c.4: irq 26 for MSI/MSI-X
- [ 0.587832] pcieport 0000:00:1c.4: setting latency timer to 64
- [ 0.588039] alloc irq_desc for 27 on node -1
- [ 0.588041] alloc kstat_irqs on node -1
- [ 0.588046] pcieport 0000:00:1c.5: irq 27 for MSI/MSI-X
- [ 0.588052] pcieport 0000:00:1c.5: setting latency timer to 64
- [ 0.589186] Linux agpgart interface v0.103
- [ 0.589232] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
- [ 0.589312] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.589562] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
- [ 0.589682] input: Macintosh mouse button emulation as /devices/virtual/input/input0
- [ 0.589728] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
- [ 0.592483] serio: i8042 KBD port at 0x60,0x64 irq 1
- [ 0.592487] serio: i8042 AUX port at 0x60,0x64 irq 12
- [ 0.592550] mice: PS/2 mouse device common for all mice
- [ 0.592580] rtc_cmos 00:03: RTC can wake from S4
- [ 0.592604] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
- [ 0.592625] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
- [ 0.592634] cpuidle: using governor ladder
- [ 0.592636] cpuidle: using governor menu
- [ 0.592639] No iBFT detected.
- [ 0.592881] TCP cubic registered
- [ 0.592965] NET: Registered protocol family 10
- [ 0.593517] Mobile IPv6
- [ 0.593519] NET: Registered protocol family 17
- [ 0.593579] PM: Resume from disk failed.
- [ 0.593586] registered taskstats version 1
- [ 0.593951] rtc_cmos 00:03: setting system clock to 2011-07-13 18:15:17 UTC (1310580917)
- [ 0.593979] Initalizing network drop monitor service
- [ 0.594014] Freeing unused kernel memory: 592k freed
- [ 0.594151] Write protecting the kernel read-only data: 4240k
- [ 0.606029] udev[76]: starting version 164
- [ 0.644833] usbcore: registered new interface driver usbfs
- [ 0.644855] usbcore: registered new interface driver hub
- [ 0.645823] usbcore: registered new device driver usb
- [ 0.653241] SCSI subsystem initialized
- [ 0.654492] sky2 driver version 1.28
- [ 0.654535] sky2 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
- [ 0.654551] sky2 0000:02:00.0: setting latency timer to 64
- [ 0.654603] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 3
- [ 0.654688] alloc irq_desc for 28 on node -1
- [ 0.654690] alloc kstat_irqs on node -1
- [ 0.654705] sky2 0000:02:00.0: irq 28 for MSI/MSI-X
- [ 0.655225] sky2 eth0: addr 00:1f:c6:88:a2:6b
- [ 0.666119] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 0.666144] alloc irq_desc for 18 on node -1
- [ 0.666146] alloc kstat_irqs on node -1
- [ 0.666151] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.666174] ehci_hcd 0000:00:1a.7: setting latency timer to 64
- [ 0.666177] ehci_hcd 0000:00:1a.7: EHCI Host Controller
- [ 0.666206] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
- [ 0.666248] ehci_hcd 0000:00:1a.7: debug port 1
- [ 0.666720] libata version 3.00 loaded.
- [ 0.669502] firewire_ohci 0000:05:03.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.670129] ehci_hcd 0000:00:1a.7: cache line size of 32 is not supported
- [ 0.670141] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf9fffc00
- [ 0.683321] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
- [ 0.683343] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.683346] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.683348] usb usb1: Product: EHCI Host Controller
- [ 0.683350] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
- [ 0.683352] usb usb1: SerialNumber: 0000:00:1a.7
- [ 0.683429] usb usb1: configuration #1 chosen from 1 choice
- [ 0.683465] hub 1-0:1.0: USB hub found
- [ 0.683470] hub 1-0:1.0: 6 ports detected
- [ 0.683536] ata_piix 0000:00:1f.2: version 2.13
- [ 0.683553] alloc irq_desc for 22 on node -1
- [ 0.683555] alloc kstat_irqs on node -1
- [ 0.683561] ata_piix 0000:00:1f.2: PCI INT B -> GSI 22 (level, low) -> IRQ 22
- [ 0.683565] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
- [ 0.683598] ata_piix 0000:00:1f.2: setting latency timer to 64
- [ 0.683652] scsi0 : ata_piix
- [ 0.683795] scsi1 : ata_piix
- [ 0.684995] ata1: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 22
- [ 0.684999] ata2: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 22
- [ 0.685030] alloc irq_desc for 23 on node -1
- [ 0.685032] alloc kstat_irqs on node -1
- [ 0.685037] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.685062] ehci_hcd 0000:00:1d.7: setting latency timer to 64
- [ 0.685066] ehci_hcd 0000:00:1d.7: EHCI Host Controller
- [ 0.685075] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
- [ 0.685114] ehci_hcd 0000:00:1d.7: debug port 1
- [ 0.688990] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
- [ 0.689002] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf9fff800
- [ 0.703366] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
- [ 0.703383] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
- [ 0.703385] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.703388] usb usb2: Product: EHCI Host Controller
- [ 0.703390] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
- [ 0.703392] usb usb2: SerialNumber: 0000:00:1d.7
- [ 0.703461] usb usb2: configuration #1 chosen from 1 choice
- [ 0.703483] hub 2-0:1.0: USB hub found
- [ 0.703488] hub 2-0:1.0: 6 ports detected
- [ 0.703565] ata_piix 0000:00:1f.5: PCI INT B -> GSI 22 (level, low) -> IRQ 22
- [ 0.703568] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
- [ 0.703601] ata_piix 0000:00:1f.5: setting latency timer to 64
- [ 0.703637] scsi2 : ata_piix
- [ 0.703711] scsi3 : ata_piix
- [ 0.704724] ata3: SATA max UDMA/133 cmd 0xa000 ctl 0x9c00 bmdma 0x9480 irq 22
- [ 0.704728] ata4: SATA max UDMA/133 cmd 0x9880 ctl 0x9800 bmdma 0x9488 irq 22
- [ 0.740460] uhci_hcd: USB Universal Host Controller Interface driver
- [ 0.740491] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.740499] uhci_hcd 0000:00:1a.0: setting latency timer to 64
- [ 0.740501] uhci_hcd 0000:00:1a.0: UHCI Host Controller
- [ 0.740518] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
- [ 0.740540] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000a800
- [ 0.740567] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.740569] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.740571] usb usb3: Product: UHCI Host Controller
- [ 0.740573] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
- [ 0.740574] usb usb3: SerialNumber: 0000:00:1a.0
- [ 0.740694] usb usb3: configuration #1 chosen from 1 choice
- [ 0.740717] hub 3-0:1.0: USB hub found
- [ 0.740722] hub 3-0:1.0: 2 ports detected
- [ 0.740759] alloc irq_desc for 21 on node -1
- [ 0.740760] alloc kstat_irqs on node -1
- [ 0.740765] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
- [ 0.740769] uhci_hcd 0000:00:1a.1: setting latency timer to 64
- [ 0.740772] uhci_hcd 0000:00:1a.1: UHCI Host Controller
- [ 0.740777] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
- [ 0.740802] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000a880
- [ 0.740827] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.740829] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.740830] usb usb4: Product: UHCI Host Controller
- [ 0.740832] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
- [ 0.740833] usb usb4: SerialNumber: 0000:00:1a.1
- [ 0.740880] usb usb4: configuration #1 chosen from 1 choice
- [ 0.740902] hub 4-0:1.0: USB hub found
- [ 0.740907] hub 4-0:1.0: 2 ports detected
- [ 0.740940] uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.740945] uhci_hcd 0000:00:1a.2: setting latency timer to 64
- [ 0.740947] uhci_hcd 0000:00:1a.2: UHCI Host Controller
- [ 0.740953] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
- [ 0.740972] uhci_hcd 0000:00:1a.2: irq 18, io base 0x0000ac00
- [ 0.740996] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.740998] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.741000] usb usb5: Product: UHCI Host Controller
- [ 0.741001] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
- [ 0.741003] usb usb5: SerialNumber: 0000:00:1a.2
- [ 0.741045] usb usb5: configuration #1 chosen from 1 choice
- [ 0.741066] hub 5-0:1.0: USB hub found
- [ 0.741071] hub 5-0:1.0: 2 ports detected
- [ 0.741108] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
- [ 0.741112] uhci_hcd 0000:00:1d.0: setting latency timer to 64
- [ 0.741114] uhci_hcd 0000:00:1d.0: UHCI Host Controller
- [ 0.741121] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
- [ 0.741140] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000a080
- [ 0.741165] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.741167] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.741169] usb usb6: Product: UHCI Host Controller
- [ 0.741170] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
- [ 0.741172] usb usb6: SerialNumber: 0000:00:1d.0
- [ 0.741213] usb usb6: configuration #1 chosen from 1 choice
- [ 0.741233] hub 6-0:1.0: USB hub found
- [ 0.741238] hub 6-0:1.0: 2 ports detected
- [ 0.741272] alloc irq_desc for 19 on node -1
- [ 0.741274] alloc kstat_irqs on node -1
- [ 0.741277] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
- [ 0.741281] uhci_hcd 0000:00:1d.1: setting latency timer to 64
- [ 0.741284] uhci_hcd 0000:00:1d.1: UHCI Host Controller
- [ 0.741289] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
- [ 0.741314] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000a400
- [ 0.741337] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.741339] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.741341] usb usb7: Product: UHCI Host Controller
- [ 0.741342] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
- [ 0.741344] usb usb7: SerialNumber: 0000:00:1d.1
- [ 0.741384] usb usb7: configuration #1 chosen from 1 choice
- [ 0.741407] hub 7-0:1.0: USB hub found
- [ 0.741411] hub 7-0:1.0: 2 ports detected
- [ 0.741446] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 0.741450] uhci_hcd 0000:00:1d.2: setting latency timer to 64
- [ 0.741453] uhci_hcd 0000:00:1d.2: UHCI Host Controller
- [ 0.741458] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
- [ 0.741477] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000a480
- [ 0.741502] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
- [ 0.741504] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 0.741505] usb usb8: Product: UHCI Host Controller
- [ 0.741507] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 uhci_hcd
- [ 0.741508] usb usb8: SerialNumber: 0000:00:1d.2
- [ 0.741550] usb usb8: configuration #1 chosen from 1 choice
- [ 0.741569] hub 8-0:1.0: USB hub found
- [ 0.741574] hub 8-0:1.0: 2 ports detected
- [ 0.747434] firewire_ohci: Added fw-ohci device 0000:05:03.0, OHCI version 1.10
- [ 0.768215] pata_marvell 0000:03:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 0.768238] pata_marvell 0000:03:00.0: setting latency timer to 64
- [ 0.768303] scsi4 : pata_marvell
- [ 0.768391] scsi5 : pata_marvell
- [ 0.768431] ata5: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 16
- [ 0.768433] ata6: DUMMY
- [ 0.931383] ata5.00: ATAPI: Optiarc DVD RW AD-7200A, 1.06, max UDMA/66
- [ 0.947384] ata5.00: configured for UDMA/66
- [ 1.020104] ata2: SATA link down (SStatus 0 SControl 300)
- [ 1.038514] ata3: SATA link down (SStatus 0 SControl 300)
- [ 1.049056] ata4: SATA link down (SStatus 0 SControl 300)
- [ 1.176041] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
- [ 1.185244] ata1.00: ATA-8: WDC WD2500AAKS-00VSA0, 01.01B01, max UDMA/133
- [ 1.185248] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 0/32)
- [ 1.209325] ata1.00: configured for UDMA/133
- [ 1.209429] scsi 0:0:0:0: Direct-Access ATA WDC WD2500AAKS-0 01.0 PQ: 0 ANSI: 5
- [ 1.211461] scsi 4:0:0:0: CD-ROM Optiarc DVD RW AD-7200A 1.06 PQ: 0 ANSI: 5
- [ 1.218654] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
- [ 1.218708] sd 0:0:0:0: [sda] Write Protect is off
- [ 1.218710] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
- [ 1.218737] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
- [ 1.218869] sda:sr0: scsi3-mmc drive: 94x/94x writer dvd-ram cd/rw xa/form2 cdda tray
- [ 1.220569] Uniform CD-ROM driver Revision: 3.20
- [ 1.220672] sr 4:0:0:0: Attached scsi CD-ROM sr0
- [ 1.246171] sda1 sda2 <
- [ 1.256076] firewire_core: created device fw0: GUID 001e8c000139ea2f, S400
- [ 1.270629] sda5 >
- [ 1.270871] sd 0:0:0:0: [sda] Attached SCSI disk
- [ 1.274037] sd 0:0:0:0: Attached scsi generic sg0 type 0
- [ 1.274064] sr 4:0:0:0: Attached scsi generic sg1 type 5
- [ 1.296516] usb 3-2: new low speed USB device using uhci_hcd and address 2
- [ 1.472596] usb 3-2: New USB device found, idVendor=0a81, idProduct=0101
- [ 1.472604] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.472606] usb 3-2: Product: USB Keyboard
- [ 1.472608] usb 3-2: Manufacturer: CHESEN
- [ 1.472686] usb 3-2: configuration #1 chosen from 1 choice
- [ 1.481875] usbcore: registered new interface driver hiddev
- [ 1.496793] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.0/input/input1
- [ 1.496834] generic-usb 0003:0A81:0101.0001: input,hidraw0: USB HID v1.10 Keyboard [CHESEN USB Keyboard] on usb-0000:00:1a.0-2/input0
- [ 1.526660] input: CHESEN USB Keyboard as /devices/pci0000:00/0000:00:1a.0/usb3/3-2/3-2:1.1/input/input2
- [ 1.526720] generic-usb 0003:0A81:0101.0002: input,hidraw1: USB HID v1.10 Device [CHESEN USB Keyboard] on usb-0000:00:1a.0-2/input1
- [ 1.526741] usbcore: registered new interface driver usbhid
- [ 1.526743] usbhid: v2.6:USB HID core driver
- [ 1.610113] md: linear personality registered for level -1
- [ 1.611707] md: multipath personality registered for level -4
- [ 1.613054] md: raid0 personality registered for level 0
- [ 1.615298] md: raid1 personality registered for level 1
- [ 1.616520] async_tx: api initialized (async)
- [ 1.616873] xor: automatically using best checksumming function: generic_sse
- [ 1.635998] generic_sse: 10087.000 MB/sec
- [ 1.636000] xor: using function: generic_sse (10087.000 MB/sec)
- [ 1.704000] raid6: int64x1 2229 MB/s
- [ 1.713507] usb 6-2: new full speed USB device using uhci_hcd and address 2
- [ 1.772002] raid6: int64x2 2977 MB/s
- [ 1.839998] raid6: int64x4 2359 MB/s
- [ 1.888084] usb 6-2: New USB device found, idVendor=09da, idProduct=8090
- [ 1.888087] usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
- [ 1.888089] usb 6-2: Product: USB Full Speed
- [ 1.888090] usb 6-2: Manufacturer: A4Tech
- [ 1.888154] usb 6-2: configuration #1 chosen from 1 choice
- [ 1.893395] input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.0/input/input3
- [ 1.893463] generic-usb 0003:09DA:8090.0003: input,hidraw2: USB HID v1.11 Mouse [A4Tech USB Full Speed] on usb-0000:00:1d.0-2/input0
- [ 1.896531] input: A4Tech USB Full Speed as /devices/pci0000:00/0000:00:1d.0/usb6/6-2/6-2:1.1/input/input4
- [ 1.896595] generic-usb 0003:09DA:8090.0004: input,hiddev0,hidraw3: USB HID v1.11 Keyboard [A4Tech USB Full Speed] on usb-0000:00:1d.0-2/input1
- [ 1.908022] raid6: int64x8 2019 MB/s
- [ 1.976012] raid6: sse2x1 4282 MB/s
- [ 2.044002] raid6: sse2x2 5543 MB/s
- [ 2.111998] raid6: sse2x4 7895 MB/s
- [ 2.112002] raid6: using algorithm sse2x4 (7895 MB/s)
- [ 2.115283] md: raid6 personality registered for level 6
- [ 2.115285] md: raid5 personality registered for level 5
- [ 2.115286] md: raid4 personality registered for level 4
- [ 2.119601] md: raid10 personality registered for level 10
- [ 2.128980] PM: Starting manual resume from disk
- [ 2.128982] PM: Resume from partition 8:5
- [ 2.128984] PM: Checking hibernation image.
- [ 2.129192] PM: Error -22 checking image file
- [ 2.129194] PM: Resume from disk failed.
- [ 2.140864] EXT3-fs: INFO: recovery required on readonly filesystem.
- [ 2.140866] EXT3-fs: write access will be enabled during recovery.
- [ 2.248165] kjournald starting. Commit interval 5 seconds
- [ 2.248173] EXT3-fs: recovery complete.
- [ 2.248645] EXT3-fs: mounted filesystem with ordered data mode.
- [ 3.481666] udev[442]: starting version 164
- [ 4.250992] processor LNXCPU:00: registered as cooling_device0
- [ 4.251247] processor LNXCPU:01: registered as cooling_device1
- [ 4.251336] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
- [ 4.251343] ACPI: Power Button [PWRB]
- [ 4.252331] processor LNXCPU:02: registered as cooling_device2
- [ 4.252380] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
- [ 4.252384] ACPI: Power Button [PWRF]
- [ 4.253139] processor LNXCPU:03: registered as cooling_device3
- [ 4.254651] input: PC Speaker as /devices/platform/pcspkr/input/input7
- [ 4.625053] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
- [ 4.625058] ACPI: I/O resource 0000:00:1f.3 [0x400-0x41f] conflicts with ACPI region SMRG [0x400-0x40f]
- [ 4.625106] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
- [ 4.665566] [drm] Initialized drm 1.1.0 20060810
- [ 5.076767] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
- [ 5.076774] nouveau 0000:01:00.0: setting latency timer to 64
- [ 5.079157] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x092a00a2)
- [ 5.080273] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
- [ 5.131488] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
- [ 5.131526] HDA Intel 0000:00:1b.0: setting latency timer to 64
- [ 5.132873] [drm] nouveau 0000:01:00.0: ... appears to be valid
- [ 5.132876] [drm] nouveau 0000:01:00.0: BIT BIOS found
- [ 5.132878] [drm] nouveau 0000:01:00.0: Bios version 62.92.45.00
- [ 5.132881] [drm] nouveau 0000:01:00.0: TMDS table revision 2.0 not currently supported
- [ 5.132883] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
- [ 5.132886] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
- [ 5.132889] [drm] nouveau 0000:01:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
- [ 5.132891] [drm] nouveau 0000:01:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
- [ 5.132893] [drm] nouveau 0000:01:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
- [ 5.132895] [drm] nouveau 0000:01:00.0: 3: 0x00000211: type 0x11 idx 2 tag 0xff
- [ 5.132897] [drm] nouveau 0000:01:00.0: 4: 0x00000213: type 0x13 idx 2 tag 0xff
- [ 5.132899] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000028
- [ 5.132902] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 01000302 00020030
- [ 5.132904] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 04011310 00000028
- [ 5.132905] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 02011312 00020030
- [ 5.132907] [drm] nouveau 0000:01:00.0: Raw DCB entry 4: 010223f1 00c0c080
- [ 5.132916] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xC3FE
- [ 5.196660] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xC92F
- [ 5.216499] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xD6BB
- [ 5.216507] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xD7B9
- [ 5.224071] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xDA07
- [ 5.224075] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xDA6C
- [ 5.227358] CA0106 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
- [ 5.227381] snd-ca0106: Model 1013 Rev 00000000 Serial 10131102
- [ 5.248513] [drm] nouveau 0000:01:00.0: 0xDA6C: Condition still not met after 20ms, skipping following opcodes
- [ 5.248522] [drm] nouveau 0000:01:00.0: 0xB622: parsing output script 0
- [ 5.248525] [drm] nouveau 0000:01:00.0: 0xB622: parsing output script 0
- [ 5.248528] [drm] nouveau 0000:01:00.0: 0xA28A: parsing output script 0
- [ 5.272993] hda_codec: ALC883: BIOS auto-probing.
- [ 5.274396] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
- [ 5.355944] [TTM] Zone kernel: Available graphics memory: 2030482 kiB.
- [ 5.355954] [drm] nouveau 0000:01:00.0: 1024 MiB VRAM
- [ 5.370728] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
- [ 5.370734] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
- [ 5.370919] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
- [ 5.374404] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
- [ 5.374897] [drm] nouveau 0000:01:00.0: Detected a DAC output
- [ 5.374903] [drm] nouveau 0000:01:00.0: Detected a TMDS output
- [ 5.374905] [drm] nouveau 0000:01:00.0: Detected a DAC output
- [ 5.374906] [drm] nouveau 0000:01:00.0: Detected a TMDS output
- [ 5.374908] [drm] nouveau 0000:01:00.0: DCB encoder 1 unknown
- [ 5.374910] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
- [ 5.374953] [drm] nouveau 0000:01:00.0: Detected a DVI-I connector
- [ 5.550993] [drm] nouveau 0000:01:00.0: allocated 1280x1024 fb: 0x40250000, bo ffff88012dac7600
- [ 5.555633] Console: switching to colour frame buffer device 160x64
- [ 5.555673] [drm] nouveau 0000:01:00.0: 0x120B: parsing clock script 0
- [ 5.557275] fb0: nouveaufb frame buffer device
- [ 5.557277] registered panic notifier
- [ 5.557280] [drm] Initialized nouveau 0.0.15 20090420 for 0000:01:00.0 on minor 0
- [ 6.657295] Adding 7928824k swap on /dev/sda5. Priority:-1 extents:1 across:7928824k
- [ 6.826219] EXT3 FS on sda1, internal journal
- [ 6.934066] loop: module loaded
- [ 7.954852] fuse init (API version 7.13)
- [ 10.434751] sky2 eth0: enabling interface
- [ 10.435189] ADDRCONF(NETDEV_UP): eth0: link is not ready
- [ 12.118187] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
- [ 12.118629] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement