API tools faq
paste
Advertisement
dgnd3700v1

dgnd3700v1

dgnd3700v1
Jun 16th, 2013
131
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 16.30 KB | None | 0 0
raw download clone embed print report
  1. CFE> e a
  2. Erase all flash (except bootrom)? (y/n):y
  3. ...............................................................................................................................................................................................................................................................
  4.  
  5. Resetting board...
  6.  
  7. DGND3700 Boot Code V1.0.8
  8. CFE version 1.0.37-104.4 for BCM96368 (32bit,SP,BE)
  9. Build Date: Mon Feb 21 17:59:46 CST 2011 (finerain@moonlight)
  10. Copyright (C) 2000-2009 Broadcom Corporation.
  11.  
  12. Parallel flash device: name AM29LV320MT, id 0x2201 size 32768KB
  13. Total Flash size: 32768K with 256 sectors
  14. ethsw: found bcm53115!
  15. Chip ID: BCM6368B2, MIPS: 400MHz
  16. Main Thread: TP0
  17. Total Memory: 134217728 bytes (128MB)
  18. Boot Address: 0xb8000000
  19.  
  20.  
  21. ** Flash image not found. **
  22.  
  23. Board IP address : 192.168.1.1:ffffff00
  24. Host IP address : 192.168.1.100
  25. Gateway IP address :
  26. Run from flash/host (f/h) : f
  27. Default host run file name : vmlinux
  28. Default host flash file name : bcm963xx_fs_kernel
  29. Boot delay (0-9 seconds) : 1
  30. Board Id (0-11) : 96368MVWG
  31. Number of MAC Addresses (1-32) : 10
  32. Base MAC Address : 20:4e:7f:c0:b5:4c
  33. PSI Size (1-64) KBytes : 24
  34. Enable Backup PSI [0|1] : 0
  35. System Log Size (0-256) KBytes : 0
  36. Main Thread Number [0|1] : 0
  37.  
  38. *** Press any key to stop auto run (1 seconds) ***
  39. Auto run second count down: 0
  40. Start TFTP server
  41. Loading : ...
  42.  
  43.  
  44. DGND3700 Boot Code V1.0.8
  45. CFE version 1.0.37-104.4 for BCM96368 (32bit,SP,BE)
  46. Build Date: Mon Feb 21 17:59:46 CST 2011 (finerain@moonlight)
  47. Copyright (C) 2000-2009 Broadcom Corporation.
  48.  
  49. Parallel flash device: name AM29LV320MT, id 0x2201 size 32768KB
  50. Total Flash size: 32768K with 256 sectors
  51. ethsw: found bcm53115!
  52. Chip ID: BCM6368B2, MIPS: 400MHz
  53. Main Thread: TP0
  54. Total Memory: 134217728 bytes (128MB)
  55. Boot Address: 0xb8000000
  56.  
  57.  
  58. ** Flash image not found. **
  59.  
  60. Board IP address : 192.168.1.1:ffffff00
  61. Host IP address : 192.168.1.100
  62. Gateway IP address :
  63. Run from flash/host (f/h) : f
  64. Default host run file name : vmlinux
  65. Default host flash file name : bcm963xx_fs_kernel
  66. Boot delay (0-9 seconds) : 1
  67. Board Id (0-11) : 96368MVWG
  68. Number of MAC Addresses (1-32) : 10
  69. Base MAC Address : 20:4e:7f:c0:b5:4c
  70. PSI Size (1-64) KBytes : 24
  71. Enable Backup PSI [0|1] : 0
  72. System Log Size (0-256) KBytes : 0
  73. Main Thread Number [0|1] : 0
  74.  
  75. *** Press any key to stop auto run (1 seconds) ***
  76. Auto run second count down: 1
  77.  
  78. CFE> f 192.168.1.2:openwrt-96368MVWG-generic-squashfs-cfe.bin
  79. Loading 192.168.1.2:openwrt-96368MVWG-generic-squashfs-cfe.bin ...
  80. Finished loading 2949124 bytes
  81.  
  82. Flashing root file system and kernel at 0xb8020000: .......................
  83.  
  84. .
  85. *** Image flash done *** !
  86.  
  87. Resetting board...
  88.  
  89. DGND3700 Boot Code V1.0.8
  90. CFE version 1.0.37-104.4 for BCM96368 (32bit,SP,BE)
  91. Build Date: Mon Feb 21 17:59:46 CST 2011 (finerain@moonlight)
  92. Copyright (C) 2000-2009 Broadcom Corporation.
  93.  
  94. Parallel flash device: name AM29LV320MT, id 0x2201 size 32768KB
  95. Total Flash size: 32768K with 256 sectors
  96. ethsw: found bcm53115!
  97. Chip ID: BCM6368B2, MIPS: 400MHz
  98. Main Thread: TP0
  99. Total Memory: 134217728 bytes (128MB)
  100. Boot Address: 0xb8000000
  101.  
  102. Board IP address : 192.168.1.1:ffffff00
  103. Host IP address : 192.168.1.100
  104. Gateway IP address :
  105. Run from flash/host (f/h) : f
  106. Default host run file name : vmlinux
  107. Default host flash file name : bcm963xx_fs_kernel
  108. Boot delay (0-9 seconds) : 1
  109. Board Id (0-11) : 96368MVWG
  110. Number of MAC Addresses (1-32) : 10
  111. Base MAC Address : 20:4e:7f:c0:b5:4c
  112. PSI Size (1-64) KBytes : 24
  113. Enable Backup PSI [0|1] : 0
  114. System Log Size (0-256) KBytes : 0
  115. Main Thread Number [0|1] : 0
  116.  
  117. *** Press any key to stop auto run (1 seconds) ***
  118. Auto run second count down: 0
  119. Booting from only image (0xb8020000) ...
  120. Code Address: 0x80010000, Entry Address: 0x80010000
  121. LZMA: Prossible old LZMA format, trying to decompress..
  122. Decompression OK!
  123. Entry at 0x80010000
  124. Closing network.
  125. Disabling Switch ports.
  126. Flushing Receive Buffers...
  127. 0 buffers found.
  128. Closing DMA Channels.
  129. Starting program at 0x80010000
  130. [ 0.000000] Linux version 3.8.13 (fnord@tschunk) (gcc version 4.6.4 (OpenWrt/Linaro GCC 4.6-2012.12 r36939) ) #1 Sun Jun 16 10:21:10 UTC 2013
  131. [ 0.000000] Detected Broadcom 0x6368 CPU revision b2
  132. [ 0.000000] CPU frequency is 400 MHz
  133. [ 0.000000] 128MB of RAM installed
  134. [ 0.000000] registering 38 GPIOs
  135. [ 0.000000] board_bcm963xx: Boot address 0xb8000000
  136. [ 0.000000] board_bcm963xx: CFE version: 1.0.37-104.4
  137. [ 0.000000] bootconsole [early0] enabled
  138. [ 0.000000] CPU revision is: 0002a031 (Broadcom BMIPS4350)
  139. [ 0.000000] board_bcm963xx: board name: 96368MVWG
  140. [ 0.000000] Determined physical RAM map:
  141. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  142. [ 0.000000] Initrd not found or empty - disabling initrd
  143. [ 0.000000] Zone ranges:
  144. [ 0.000000] Normal [mem 0x00000000-0x07ffffff]
  145. [ 0.000000] Movable zone start for each node
  146. [ 0.000000] Early memory node ranges
  147. [ 0.000000] node 0: [mem 0x00000000-0x07ffffff]
  148. [ 0.000000] Reserving 0MB of memory at 0MB for crashkernel
  149. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 16 bytes.
  150. [ 0.000000] Primary data cache 32kB, 2-way, VIPT, cache aliases, linesize 16 bytes
  151. [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 32512
  152. [ 0.000000] Kernel command line: root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200
  153. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  154. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  155. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  156. [ 0.000000] __ex_table already sorted, skipping sort
  157. [ 0.000000] Memory: 126212k/131072k available (2442k kernel code, 4860k reserved, 691k data, 256k init, 0k highmem)
  158. [ 0.000000] NR_IRQS:128
  159. [ 0.000000] Calibrating delay loop... 397.82 BogoMIPS (lpj=795648)
  160. [ 0.032000] pid_max: default: 32768 minimum: 301
  161. [ 0.036000] Mount-cache hash table entries: 512
  162. [ 0.040000] NET: Registered protocol family 16
  163. [ 0.048000] registering PCI controller with io_map_base unset
  164. [ 0.052000] registering PCI controller with io_map_base unset
  165. [ 0.060000] bio: create slab <bio-0> at 0
  166. [ 0.064000] PCI host bridge to bus 0000:00
  167. [ 0.068000] pci_bus 0000:00: root bus resource [mem 0x30000000-0x37ffffff]
  168. [ 0.072000] pci_bus 0000:00: root bus resource [io 0x8000000-0x8007fff]
  169. [ 0.076000] pci_bus 0000:00: No busn resource found for root bus, will use [bus 00-ff]
  170. [ 0.108000] pci 0000:00:01.0: BAR 0: assigned [mem 0x30000000-0x30003fff]
  171. [ 0.112000] pci 0000:00:02.0: BAR 0: assigned [mem 0x30004000-0x30007fff]
  172. [ 0.116000] PCI host bridge to bus 0000:01
  173. [ 0.120000] pci_bus 0000:01: root bus resource [mem 0x38000000-0x3fffffff]
  174. [ 0.124000] pci_bus 0000:01: root bus resource [io 0x8008000-0x800ffff]
  175. [ 0.128000] pci_bus 0000:01: No busn resource found for root bus, will use [bus 01-ff]
  176. [ 0.132000] pci 0000:01:1e.0: bridge configuration invalid ([bus 00-00]), reconfiguring
  177. [ 0.136000] pci 0000:01:1e.0: BAR 10: assigned [mem 0x38000000-0x3fffffff]
  178. [ 0.140000] pci 0000:01:1e.0: BAR 7: assigned [io 0x8008000-0x80080ff]
  179. [ 0.144000] pci 0000:01:1e.0: BAR 8: assigned [io 0x8008400-0x80084ff]
  180. [ 0.148000] pci 0000:01:1e.0: CardBus bridge to [bus 02-05]
  181. [ 0.152000] pci 0000:01:1e.0: bridge window [io 0x8008000-0x80080ff]
  182. [ 0.156000] pci 0000:01:1e.0: bridge window [io 0x8008400-0x80084ff]
  183. [ 0.160000] pci 0000:01:1e.0: bridge window [mem 0x38000000-0x3fffffff]
  184. [ 0.164000] PCI: Enabling device 0000:01:1e.0 (0000 -> 0003)
  185. [ 0.168000] Switching to clocksource MIPS
  186. [ 0.172000] PCI: Enabling device 0000:00:02.0 (0000 -> 0002)
  187. [ 0.204000] ssb: Found chip with id 0xA8D6, rev 0x00 and package 0x08
  188. [ 0.268000] ssb: Sonics Silicon Backplane found on PCI device 0000:00:02.0
  189. [ 0.276000] NET: Registered protocol family 2
  190. [ 0.280000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
  191. [ 0.288000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  192. [ 0.296000] TCP: Hash tables configured (established 1024 bind 1024)
  193. [ 0.304000] TCP: reno registered
  194. [ 0.304000] UDP hash table entries: 256 (order: 0, 4096 bytes)
  195. [ 0.312000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  196. [ 0.320000] NET: Registered protocol family 1
  197. [ 0.324000] audit: initializing netlink socket (disabled)
  198. [ 0.332000] type=2000 audit(0.332:1): initialized
  199. [ 0.336000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  200. [ 0.340000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  201. [ 0.352000] msgmni has been set to 246
  202. [ 0.356000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
  203. [ 0.364000] io scheduler noop registered
  204. [ 0.368000] io scheduler deadline registered (default)
  205. Ę[ 0.384000] console [ttyS0] enabled, bootconsole disabled= 10) is a bcm63xx_uart
  206. [ 0.384000] console [ttyS0] enabled, bootconsole disabled
  207. [ 0.396000] bcm63xx-rng bcm63xx-rng: registered RNG driver
  208. [ 0.404000] physmap platform flash device: 08000000 at 18000000
  209. [ 0.408000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x002201
  210. [ 0.420000] Amd/Fujitsu Extended Query Table at 0x0040
  211. [ 0.424000] Amd/Fujitsu Extended Query version 1.3.
  212. [ 0.432000] number of CFI chips: 1
  213. [ 0.436000] bcm63xxpart: CFE boot tag found with version 6 and board type 96368MVWG
  214. [ 0.440000] bcm63xxpart: Partition 0 is CFE offset 0 and length 20000
  215. [ 0.448000] bcm63xxpart: Partition 1 is kernel offset 20100 and length 11ff00
  216. [ 0.456000] bcm63xxpart: Partition 2 is rootfs offset 140000 and length 1ea0000
  217. [ 0.464000] bcm63xxpart: Partition 3 is nvram offset 1fe0000 and length 20000
  218. [ 0.472000] bcm63xxpart: Partition 4 is linux offset 20000 and length 1fc0000
  219. [ 0.480000] bcm63xxpart: Spare partition is offset 2f0004 and length 1cefffc
  220. [ 0.484000] 5 bcm63xxpart partitions found on MTD device physmap-flash.0
  221. [ 0.492000] Creating 5 MTD partitions on "physmap-flash.0":
  222. [ 0.500000] 0x000000000000-0x000000020000 : "CFE"
  223. [ 0.504000] 0x000000020100-0x000000140000 : "kernel"
  224. [ 0.508000] mtd: partition "kernel" must either start or end on erase block boundary or be smaller than an erase block -- forcing read-only
  225. [ 0.524000] 0x000000140000-0x000001fe0000 : "rootfs"
  226. [ 0.532000] mtd: partition "rootfs" set to be root filesystem
  227. [ 0.536000] mtd: partition "rootfs_data" created automatically, ofs=300000, len=1CE0000
  228. [ 0.544000] 0x000000300000-0x000001fe0000 : "rootfs_data"
  229. [ 0.552000] 0x000001fe0000-0x000002000000 : "nvram"
  230. [ 0.560000] 0x000000020000-0x000001fe0000 : "linux"
  231. [ 0.568000] bcm63xx-spi bcm63xx-spi: at 0xb0000800 (irq 9, FIFOs size 542)
  232. [ 0.616000] b53_common: found switch: BCM63xx, rev 0
  233. [ 0.620000] bcm63xx-wdt bcm63xx-wdt: started, timer margin: 30 sec
  234. [ 0.632000] TCP: cubic registered
  235. [ 0.636000] NET: Registered protocol family 17
  236. [ 0.640000] Bridge firewalling registered
  237. [ 0.644000] 8021q: 802.1Q VLAN Support v1.8
  238. [ 0.656000] VFS: Mounted root (squashfs filesystem) readonly on device 31:2.
  239. [ 0.664000] Freeing unused kernel memory: 256k freed
  240. - preinit -
  241. Press the [f] key and hit [enter] to enter failsafe mode
  242. - regular preinit -
  243. [ 6.260000] jffs2: notice: (324) jffs2_build_xattr_subsystem: complete building xattr subsystem, 0 of xdatum (0 unchecked, 0 orphan) and 0 of xref (0 dead, 0 orphan) found.
  244. switching to jffs2
  245. - init -
  246.  
  247. Please press Enter to activate this console. [ 8.452000] Loading modules backported from Linux version master-2013-06-13-0-g09fcdfb
  248. [ 8.460000] Backport generated by backports.git backports-20130531-13-g3d933eb
  249. [ 8.512000] cfg80211: Calling CRDA to update world regulatory domain
  250. [ 8.516000] cfg80211: World regulatory domain updated:
  251. [ 8.524000] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
  252. [ 8.532000] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  253. [ 8.540000] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  254. [ 8.548000] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
  255. [ 8.556000] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  256. [ 8.564000] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
  257. [ 9.400000] NET: Registered protocol family 10
  258. [ 10.496000] b43-phy0: Broadcom 43222 WLAN found (core revision 16)
  259. [ 10.548000] b43-phy0: Found PHY: Analog 8, Type 4 (N), Revision 6
  260. [ 10.576000] Broadcom 43xx driver loaded [ Features: PNL ]
  261. [ 10.708000] Button Hotplug driver version 0.4.1
  262. [ 10.948000] PPP generic driver version 2.4.2
  263. [ 11.128000] ip_tables: (C) 2000-2006 Netfilter Core Team
  264. [ 11.280000] xt_time: kernel timezone is -0000
  265. [ 11.328000] NET: Registered protocol family 24
  266. [ 11.356000] nf_conntrack version 0.5.0 (1976 buckets, 7904 max)
  267. [ 11.668000] ip6_tables: (C) 2000-2006 Netfilter Core Team
  268. [ 19.224000] device eth0.1 entered promiscuous mode
  269. [ 19.228000] device eth0 entered promiscuous mode
  270. [ 19.236000] br-lan: port 1(eth0.1) entered forwarding state
  271. [ 19.240000] br-lan: port 1(eth0.1) entered forwarding state
  272. [ 20.216000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
  273. [ 21.244000] br-lan: port 1(eth0.1) entered forwarding state
  274.  
  275.  
  276.  
  277. BusyBox v1.19.4 (2013-06-16 03:20:00 UTC) built-in shell (ash)
  278. Enter 'help' for a list of built-in commands.
  279.  
  280. _______ ________ __
  281. | |.-----.-----.-----.| | | |.----.| |_
  282. | - || _ | -__| || | | || _|| _|
  283. |_______|| __|_____|__|__||________||__| |____|
  284. |__| W I R E L E S S F R E E D O M
  285. -----------------------------------------------------
  286. BARRIER BREAKER (Bleeding Edge, r36939)
  287. -----------------------------------------------------
  288. * 1/2 oz Galliano Pour all ingredients into
  289. * 4 oz cold Coffee an irish coffee mug filled
  290. * 1 1/2 oz Dark Rum with crushed ice. Stir.
  291. * 2 tsp. Creme de Cacao
  292. -----------------------------------------------------
  293. root@OpenWrt:/#
  294. root@OpenWrt:/# ifconfig
  295. br-lan Link encap:Ethernet HWaddr 20:4E:7F:C0:B5:4C
  296. inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0
  297. inet6 addr: fe80::224e:7fff:fec0:b54c/64 Scope:Link
  298. inet6 addr: fdc3:1f93:f989::1/60 Scope:Global
  299. UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
  300. RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  301. TX packets:44 errors:0 dropped:0 overruns:0 carrier:0
  302. collisions:0 txqueuelen:0
  303. RX bytes:0 (0.0 B) TX bytes:7348 (7.1 KiB)
  304.  
  305. eth0 Link encap:Ethernet HWaddr 20:4E:7F:C0:B5:4C
  306. inet6 addr: fe80::224e:7fff:fec0:b54c/64 Scope:Link
  307. UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
  308. RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  309. TX packets:51 errors:0 dropped:0 overruns:0 carrier:0
  310. collisions:0 txqueuelen:1000
  311. RX bytes:0 (0.0 B) TX bytes:8230 (8.0 KiB)
  312.  
  313. eth0.1 Link encap:Ethernet HWaddr 20:4E:7F:C0:B5:4C
  314. UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
  315. RX packets:0 errors:0 dropped:0 overruns:0 frame:0
  316. TX packets:44 errors:0 dropped:0 overruns:0 carrier:0
  317. collisions:0 txqueuelen:0
  318. RX bytes:0 (0.0 B) TX bytes:7348 (7.1 KiB)
  319.  
  320. lo Link encap:Local Loopback
  321. inet addr:127.0.0.1 Mask:255.0.0.0
  322. inet6 addr: ::1/128 Scope:Host
  323. UP LOOPBACK RUNNING MTU:65536 Metric:1
  324. RX packets:110304 errors:0 dropped:0 overruns:0 frame:0
  325. TX packets:110304 errors:0 dropped:0 overruns:0 carrier:0
  326. collisions:0 txqueuelen:0
  327. RX bytes:7500672 (7.1 MiB) TX bytes:7500672 (7.1 MiB)
  328.  
  329. root@OpenWrt:/#
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement
Public Pastes
Advertisement
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!