Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- boot0 version : 4.0.0
- rtc[1] value = 0x00010000
- rtc[2] value = 0x00020000
- rtc[3] value = 0x00030000
- DRAM DRIVE INFO: V1.0
- DRAM Type =7 (2:DDR2,3:DDR3,6:LPDDR2,7:LPDDR3)
- DRAM normal_mode value: 00000001
- DRAM CLK =732 MHZ
- PMU: AXP81X
- ddr voltage = 1200 mv
- using ic A83T
- using axp AXP813
- DRAM zq value: 00003bfb
- dram size =2048
- card boot number = 0
- card no is 0
- sdcard 0 line count 0
- [mmc]: mmc driver ver 2014-8-11 15:06:39
- [mmc]: ***Try SD card 0***
- [mmc]: SD/MMC Card: 4bit, capacity: 7580MB
- [mmc]: vendor: Man 00035344 Snr 10133156
- [mmc]: product: SU08G
- [mmc]: revision: 8.0
- [mmc]: ***SD/MMC 0 init OK!!!***
- sdcard 0 init ok
- ERROR! NOT find the head of uboot.
- The size of uboot is 000dc000.
- sum=0b0000e2
- src_sum=0b0000e2
- Succeed in loading uboot from sdmmc flash.
- Ready to disable icache.
- Jump to secend Boot.
- [ 0.318]
- U-Boot 2011.09-rc1-00000-gf59d1ae-dirty (Sep 24 2015 - 20:34:26) Allwinner Technology
- [ 0.328]version: 2.1.0
- normal mode
- [ 0.407]pmbus: normal or secure os
- ready
- not set main pmu id
- [ 0.415]PMU: AXP81X
- [ 0.417]PMU: AXP81X found
- bat_vol=301, ratio=100
- [ 0.422]PMU: dcdc2 900
- [ 0.425]PMU: pll1 1008 Mhz
- AXI0=336 Mhz,PLL_PERIPH =1200 Mhz AHB1=200 Mhz, APB1=100 Mhz
- set power on vol to default
- dcdc1_vol = 3000, onoff=1
- dcdc2_vol = 900, onoff=1
- dcdc3_vol = 900, onoff=1
- dcdc4_vol = 900, onoff=1
- dcdc6_vol = 900, onoff=1
- aldo1_vol = 1800, onoff=0
- aldo2_vol = 1800, onoff=1
- aldo3_vol = 3000, onoff=1
- eldo2_vol = 1800, onoff=0
- dldo1_vol = 3300, onoff=0
- dldo2_vol = 4200, onoff=0
- dldo3_vol = 2500, onoff=1
- dldo4_vol = 2800, onoff=0
- fldo2_vol = 900, onoff=1
- find power_sply to end
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3000
- reg addr=0x1c20b04, value=0xa, pmu_vol=3000
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3000
- reg addr=0x1c20b08, value=0xa, pmu_vol=3000
- supply=aldo1
- axp=axp81x, supply=aldo1, vol=1800
- reg addr=0x1c20b0c, value=0x0, pmu_vol=1800
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3000
- reg addr=0x1c20b10, value=0xa, pmu_vol=3000
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3000
- reg addr=0x1c20b14, value=0xa, pmu_vol=3000
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3000
- reg addr=0x1c20b18, value=0xa, pmu_vol=3000
- supply=dcdc1
- axp=axp81x, supply=dcdc1, vol=3000
- reg addr=0x1c20b1c, value=0xa, pmu_vol=3000
- supply=aldo3
- axp=axp81x, supply=aldo3, vol=3000
- reg addr=0x1f02f00, value=0xa, pmu_vol=3000
- config gpio bias voltage finish
- vbus exist
- no battery, limit to dc
- ac100 reg 0x00 = 0x101
- ac100 reg 0xd0 = 0x0
- ac100 reg 0xd1 = 0x0
- fel key old mode
- run key detect
- no key found
- no key input
- dram_para_set start
- dram_para_set end
- [ 0.647]DRAM: 2 GiB
- relocation Offset is: 75b00000
- [recovery] no use
- [box standby] read rtc = 0x0
- [box_start_os] mag be start_type no use
- gic: normal or no secure os mode
- workmode = 0
- MMC: 0
- [ 0.852][mmc]: mmc driver ver 2014-10-10 13:22:35
- [ 0.856][mmc]: get sdc_f_max fail,use default sdc_f_max 48000000
- [ 0.863][mmc]: get sdc_ex_dly_used fail,use default dly
- [ 0.868][mmc]: SUNXI SD/MMC: 0
- [ 0.881][mmc]: ************Try SD card 0************
- [ 0.930][mmc]: MID 000003 PSN 10133156
- [ 0.933][mmc]: PNM SU08G -- 0x53-55-30-38-47-05
- [ 0.938][mmc]: PRV 8.0
- [ 0.940][mmc]: MDT m-6 y-2013
- [ 0.944][mmc]: ---------------mmc->clock 46153846-----------
- [ 0.949][mmc]: ---------------mmc->bus_width 4--------------
- [ 0.955][mmc]: SD/MMC Card: 4bit, capacity: 7580MB
- [ 0.960][mmc]: boot0 capacity: 0KB,boot1 capacity: 0KB
- [ 0.965][mmc]: ************SD/MMC 0 init OK!!!************
- [ 0.972]sunxi flash init ok
- script config pll_de to 504 Mhz
- script config pll_video1 to 297 Mhz
- enable power vcc-hdmi-18, ret=0
- [TV]gm7121_module_init begin
- DRV_DISP_Init end
- boot_disp.auto_hpd=1
- auto hpd check has 100 times!
- auto check no any connected, the output_type is 2
- [disk_read_fs] no the partition
- error: open config.fex, maybe it is not exist
- [ 2.203]finally, output_type=0x2, output_mode=0xb, screen_id=0x1, disp_para=0x20b0000
- sunxi secure storage is not supported
- private partition is not exist
- In: serial
- Out: serial
- Err: serial
- --------fastboot partitions--------
- -total partitions:6-
- -name- -start- -size-
- boot-res : 1000000 2000000
- env : 3000000 1000000
- boot : 4000000 1000000
- rootfs : 5000000 20000000
- klog : 25000000 1000000
- UDISK : 26000000 0
- -----------------------------------
- base bootcmd=run setargs_nand boot_normal
- bootcmd set setargs_mmc
- key 0
- recovery key high 10, low 8
- cant find fstbt value
- no misc partition is found
- misc_message->command = 0
- to be run cmd=run setargs_mmc boot_normal
- the private part isn't exist
- mount part name boot-res
- cant open script.bin, maybe it is not exist
- WORK_MODE_BOOT
- adver not need show
- sunxi_bmp_logo_display
- f_read btr over hd12896
- read byte = 6220854
- [ 2.628]screen_id =1, screen_width =0, screen_height =0
- [ 2.633]frame buffer address 46400000
- [ 2.637]Hit any key to stop autoboot: 0
- read boot or recovery all
- [ 6.619]sunxi flash read :offset 4000000, 16146315 bytes OK
- [ 6.628]ready to boot
- board_display_setenv: disp_para=20b0000
- [ 6.634][mmc]: MMC Device 2 not found
- [ 6.638][mmc]: mmc not find,so not exit
- [ 6.642]
- Starting kernel ...
- [sun8i_fixup]: From boot, get meminfo:
- Start: 0x40000000
- Size: 2048MB
- ion_carveout reserve: 96m 128m
- ion_reserve_common: ion reserve: [0xb8000000, 0xc0000000]!
- ion_cma reserve: 120m 176m 512m
- ion_reserve_common: ion reserve: [0xa0000000, 0xc0000000]!
- ------sun8i_smp_init_ops----37-----
- [ 0.000000] Booting Linux on physical CPU 0
- [ 0.000000] Initializing cgroup subsys cpuset
- [ 0.000000] Initializing cgroup subsys cpu
- [ 0.000000] Linux version 3.4.39-BPI-M3-Kernel (dangku@dangku-desktop) (gcc version 4.6.3 20120201 (prerelease) (crosstool-NG linaro-1.13.1-2012.02-20120222 - Linaro G5
- [ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
- [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
- [ 0.000000] Machine: sun8i
- [ 0.000000] cma: CMA: reserved 512 MiB at a0000000
- [ 0.000000] Memory policy: ECC disabled, Data cache writealloc
- [ 0.000000] On node 0 totalpages: 524288
- [ 0.000000] free_area_init_node: node 0, pgdat c0b5bf80, node_mem_map c0c02000
- [ 0.000000] Normal zone: 1404 pages used for memmap
- [ 0.000000] Normal zone: 0 pages reserved
- [ 0.000000] Normal zone: 158340 pages, LIFO batch:31
- [ 0.000000] HighMem zone: 3204 pages used for memmap
- [ 0.000000] HighMem zone: 361340 pages, LIFO batch:31
- [ 0.000000] script_init enter!
- [ 0.000000] script_init exit!
- [ 0.000000] [mcpm_smp_init_cpus] ncores=8
- [ 0.000000] PERCPU: Embedded 8 pages/cpu @c1e27000 s11648 r8192 d12928 u32768
- [ 0.000000] pcpu-alloc: s11648 r8192 d12928 u32768 alloc=8*4096
- [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519680
- [ 0.000000] Kernel command line: enforcing=1 console=ttyS0,115200 console=tty1 root=/dev/mmcblk0p2 rootwait init=/init vmalloc=384M ion_cma_list=120m,176m,512m logleve0
- [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
- [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
- [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
- [ 0.000000] Memory: 2048MB = 2048MB total
- [ 0.000000] Memory: 1540876k/1540876k available, 556276k reserved, 933888K highmem
- [ 0.000000] Virtual kernel memory layout:
- [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
- [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
- [ 0.000000] vmalloc : 0xe7800000 - 0xff000000 ( 376 MB)
- [ 0.000000] lowmem : 0xc0000000 - 0xe7000000 ( 624 MB)
- [ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
- [ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
- [ 0.000000] .text : 0xc0008000 - 0xc09d6da0 (10044 kB)
- [ 0.000000] .init : 0xc09d7000 - 0xc0a28d80 ( 328 kB)
- [ 0.000000] .data : 0xc0a2a000 - 0xc0b6dbc8 (1295 kB)
- [ 0.000000] .bss : 0xc0b6dbec - 0xc0c01d50 ( 593 kB)
- [ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
- [ 0.000000] Preemptible hierarchical RCU implementation.
- [ 0.000000] NR_IRQS:544
- [ 0.000000] Architected local timer running at 24.00MHz.
- [ 0.000000] Switching to timer-based delay loop
- [ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
- [ 0.000000] Console: colour dummy device 80x30
- [ 0.000000] console [tty1] enabled
- [ 0.001403] Calibrating delay loop (skipped), value calculated using timer frequency.. 4800.00 BogoMIPS (lpj=24000000)
- [ 0.001477] pid_max: default: 32768 minimum: 301
- [ 0.001816] Mount-cache hash table entries: 512
- [ 0.003136] Initializing cgroup subsys net_prio
- [ 0.003221] CPU: Testing write buffer coherency: ok
- [ 0.003312] ftrace: allocating 24814 entries in 73 pages
- [ 0.040268] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
- [ 0.040351] Setting up static identity map for 0x406b4fe0 - 0x406b5038
- [ 0.010000] CPU1: Booted secondary processor
- [ 0.010000] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
- [ 0.010000] CPU2: Booted secondary processor
- [ 0.010000] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
- [ 0.010000] CPU3: Booted secondary processor
- [ 0.010000] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
- [ 0.260095] CPU4: failed to boot: -22
- [ 0.300066] CPU5: failed to boot: -22
- [ 0.340070] CPU6: failed to boot: -22
- [ 0.380088] CPU7: failed to boot: -22
- [ 0.380292] Brought up 4 CPUs
- [ 0.380318] SMP: Total of 4 processors activated (19200.00 BogoMIPS).
- [ 0.380888] devtmpfs: initialized
- [ 0.387370] pinctrl core: initialized pinctrl subsystem
- [ 0.410296] NET: Registered protocol family 16
- [ 0.434242] DMA: preallocated 2048 KiB pool for atomic coherent allocations
- [ 0.434353] script_sysfs_init success
- [ 0.434404] sunxi_dump_init success
- [ 0.435530] gpiochip_add: registered GPIOs 0 to 383 on device: sunxi-pinctrl
- [ 0.437339] sunxi-pinctrl sunxi-pinctrl: initialized sunXi PIO driver
- [ 0.437808] gpiochip_add: registered GPIOs 1024 to 1031 on device: axp-pinctrl
- [ 0.439034] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
- [ 0.439078] hw-breakpoint: maximum watchpoint size is 8 bytes.
- [ 0.440117] [sunxi-module]: [sunxi-module.0] probe success
- [ 0.440569] script config pll_video1 to 297 Mhz
- [ 0.440606] script config pll_ve to 432 Mhz
- [ 0.440630] Not Found clk pll_periph in script
- [ 0.440659] script config pll_gpu to 432 Mhz
- [ 0.440687] script config pll_hsic to 480 Mhz
- [ 0.440716] script config pll_de to 504 Mhz
- [ 0.440738] sunxi_default_clk_init
- [ 0.440758] try to set pll6ahb1 to 200000000
- [ 0.440818] try to set ahb clk source to pll6ahb1
- [ 0.440843] set ahb clk source to pll6ahb1
- [ 0.440866] try to set ahb1 to 200000000
- [ 0.440892] try to set apb1 to 100000000
- [ 0.441837] ===fe3o4==== sunxi_root_procfs_attach ret:0
- [ 0.451013] bio: create slab <bio-0> at 0
- [ 0.451013] [ARISC] :sunxi-arisc driver v1.70
- [ 0.463001] [ARISC] :arisc version: [v0.1.25.3]
- [ 0.463056] [sunxi-module]: arisc register success
- [ 0.463487] sunxi_get_soc_bin: slow chip
- [ 0.463931] [ARISC] :sunxi-arisc driver v1.70 startup succeeded
- [ 0.010000] CPU4: Booted secondary processor
- [ 0.010000] CPU4: thread -1, cpu 0, socket 1, mpidr 80000100
- [ 0.010000] CPU5: Booted secondary processor
- [ 0.010000] CPU5: thread -1, cpu 1, socket 1, mpidr 80000101
- [ 0.010000] CPU6: Booted secondary processor
- [ 0.010000] CPU6: thread -1, cpu 2, socket 1, mpidr 80000102
- [ 0.010000] CPU7: Booted secondary processor
- [ 0.010000] CPU7: thread -1, cpu 3, socket 1, mpidr 80000103
- [ 0.490827] SCSI subsystem initialized
- [ 0.490827] libata version 3.00 loaded.
- [ 0.490827] usbcore: registered new interface driver usbfs
- [ 0.490827] usbcore: registered new interface driver hub
- [ 0.490827] usbcore: registered new device driver usb
- [ 0.490827] twi_chan_cfg()335 - [twi0] has no twi_regulator.
- [ 0.490827] twi_chan_cfg()335 - [twi1] has no twi_regulator.
- [ 0.490827] twi_chan_cfg()335 - [twi2] has no twi_regulator.
- [ 0.491693] Linux video capture interface: v2.00
- [ 0.510396] Advanced Linux Sound Architecture Driver Version 1.0.25.
- [ 0.511055] Bluetooth: Core ver 2.16
- [ 0.511121] NET: Registered protocol family 31
- [ 0.511147] Bluetooth: HCI device and connection manager initialized
- [ 0.511179] Bluetooth: HCI socket layer initialized
- [ 0.511205] Bluetooth: L2CAP socket layer initialized
- [ 0.511251] Bluetooth: SCO socket layer initialized
- [ 0.511531] cfg80211: Calling CRDA to update world regulatory domain
- [ 0.511620] Switching to clocksource arch_sys_counter
- [ 0.536971] FS-Cache: Loaded
- [ 0.537321] CacheFiles: Loaded
- [ 0.548797] axp81x_dcdc1: Failed to create debugfs directory
- [ 0.550003] NET: Registered protocol family 2
- [ 0.550424] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
- [ 0.551210] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
- [ 0.553699] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
- [ 0.555279] TCP: Hash tables configured (established 131072 bind 65536)
- [ 0.555311] TCP: reno registered
- [ 0.555337] UDP hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.555404] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
- [ 0.555839] NET: Registered protocol family 1
- [ 0.556277] RPC: Registered named UNIX socket transport module.
- [ 0.556311] RPC: Registered udp transport module.
- [ 0.556335] RPC: Registered tcp transport module.
- [ 0.556359] RPC: Registered tcp NFSv4.1 backchannel transport module.
- [ 0.557049] hw perfevents: enabled with ARMv7 Cortex_A7 PMU driver, 5 counters available
- [ 0.557235] [pm]aw_pm_init!
- [ 0.557261] standby_mode = 1.
- [ 0.557281] wakeup src cnt is : 2.
- [ 0.557308] pmu name: pmu1_para .
- [ 0.557334] pmu1_enable = 0x1.
- [ 0.557355] pmux_id = 0x7.
- [ 0.557377] pmu name: pmu2_para .
- [ 0.557399] config_pmux_para: script_parser_fetch err.
- [ 0.557424] pmu2_enable = 0x0.
- [ 0.557828] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
- [ 0.558011] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
- [ 0.558051] add_sys_pwr_dm: axp81x_aldo2 ldo already alwayson.
- [ 0.558145] after inited: sys_mask config = 0xebd5.
- [ 0.558174] dynamic_standby enalbe = 0x0.
- [ 0.558242] sunxi_reg_init enter
- [ 0.558566] lock super standby for a83!
- [ 0.558599] lookup_scene_lock_name: new scene lock super_standby
- [ 0.558627] scene_lock_init name=super_standby
- [ 0.558653] scene_lock: super_standby, type 5, count 1
- [ 0.560482] highmem bounce pool size: 64 pages
- [ 0.570716] squashfs: version 4.0 (2009/01/31) Phillip Lougher
- [ 0.572532] NTFS driver 2.1.30 [Flags: R/W].
- [ 0.572754] fuse init (API version 7.18)
- [ 0.573482] msgmni has been set to 1185
- [ 0.576288] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
- [ 0.576332] io scheduler noop registered
- [ 0.576355] io scheduler deadline registered
- [ 0.576556] io scheduler cfq registered (default)
- [ 0.577060] pwm module init!
- [ 0.577653] [DISP]disp_module_init
- [ 0.638222] [DISP] Fb_map_kernel_logo,line:893:Fb_map_kernel_logo failed!
- [ 0.671389] Console: switching to colour frame buffer device 240x67
- [ 0.704451] [DISP]disp_module_init finish
- [ 0.778315] uart0: ttyS0 at MMIO 0x1c28000 (irq = 32) is a SUNXI
- [ 0.778514] sw_uart_pm()890 - uart0 clk is already enable
- [ 0.778674] sw_console_setup()1233 - console setup baud 115200 parity n bits 8, flow n
- [ 0.874723] console [ttyS0] enabled
- [ 1.078393] axp81x_dcdc1: Failed to create debugfs directory
- [ 1.286794] uart1: ttyS1 at MMIO 0x1c28400 (irq = 33) is a SUNXI
- [ 1.517592] axp81x_dcdc1: Failed to create debugfs directory
- [ 1.724570] uart2: ttyS2 at MMIO 0x1c28800 (irq = 34) is a SUNXI
- [ 1.927702] axp81x_dcdc1: Failed to create debugfs directory
- [ 2.122330] uart3: ttyS3 at MMIO 0x1c28c00 (irq = 35) is a SUNXI
- [ 2.314019] brd: module loaded
- [ 2.525875] loop: module loaded
- [ 2.720957] [rf_pm]: select module num is 10
- [ 2.811592] [rf_pm]: module power1 name vcc-wifi-io
- [ 2.823255] [rf_pm]: module power1 vol 3300000
- [ 2.834355] [rf_pm]: module power2 name
- [ 2.844769] [rf_pm]: failed to fetch module_power2_vol
- [ 2.856500] [rf_pm]: module power3 name
- [ 2.866793] [rf_pm]: failed to fetch module_power3_vol
- [ 2.878426] [rf_pm]: mod has no power_switch gpio
- [ 2.889530] [rf_pm]: mod has no chip_en gpio
- [ 2.900088] [rf_pm]: lpo_use_apclk: ac10032k2
- [ 2.910798] [rf_pm]: get power regulator failed.
- [ 2.921755] [rf_pm]: set vcc-wifi-io to 3300000 v
- [ 2.932763] [rf_pm]: enable vcc-wifi-io.
- [ 2.943366] [rf_pm]: mod info power switch -1
- [ 2.954021] [rf_pm]: set ac10032k2 32k out
- [ 2.964392] scene_lock_init name=rf_pm
- [ 2.974483] [wifi_pm]: wifi gpio init is OK !!
- [ 2.985061] [rfkill]: mod has no ls_int gpio
- [ 2.995384] [rfkill]: mod has no pcm_ch gpio
- [ 3.006004] [rfkill]: rfkill set power 0
- [ 3.030094] Loading iSCSI transport class v2.0-870.
- [ 3.041624] iscsi: registered transport (tcp)
- [ 3.052616] [spi]: Found 1 spi devices in config files
- [ 3.064071] boards_num modalias max_spd_hz bus_num cs mode
- [ 3.078211] 0 spidev 33000000 0 0 3
- [ 3.092773] axp81x_dcdc1: Failed to create debugfs directory
- [ 3.105147] spi spi0: master is unqueued, this is deprecated
- [ 3.117657] allwinners SoC SPI Driver loaded for Bus SPI-0 with 1 Slaves at most
- [ 3.131960] [spi-0]: driver probe succeed, base f1c68000, irq 97!
- [ 3.146364] usbcore: registered new interface driver qf9700
- [ 3.158766] usbcore: registered new interface driver smsc95xx
- [ 3.171261] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.204767] sunxi-ehci sunxi-ehci.1: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.219922] sunxi-ehci sunxi-ehci.1: new USB bus registered, assigned bus number 1
- [ 3.235558] sunxi-ehci sunxi-ehci.1: irq 104, io mem 0xf1c1a000
- [ 3.260055] sunxi-ehci sunxi-ehci.1: USB 0.0 started, EHCI 1.00
- [ 3.272817] ehci_irq: highspeed device connect
- [ 3.284023] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
- [ 3.297793] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.312075] usb usb1: Product: SW USB2.0 'Enhanced' Host Controller (EHCI) Driver
- [ 3.326711] usb usb1: Manufacturer: Linux 3.4.39-BPI-M3-Kernel ehci_hcd
- [ 3.340349] usb usb1: SerialNumber: sunxi-ehci
- [ 3.352207] hub 1-0:1.0: USB hub found
- [ 3.362624] hub 1-0:1.0: 1 port detected
- [ 3.373634] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
- [ 3.406900] sunxi-ohci sunxi-ohci.1: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 3.421859] sunxi-ohci sunxi-ohci.1: new USB bus registered, assigned bus number 2
- [ 3.436706] sunxi-ohci sunxi-ohci.1: irq 105, io mem 0xf1c1a400
- [ 3.504142] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
- [ 3.518209] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 3.532601] usb usb2: Product: SW USB2.0 'Open' Host Controller (OHCI) Driver
- [ 3.546901] usb usb2: Manufacturer: Linux 3.4.39-BPI-M3-Kernel ohci_hcd
- [ 3.560587] usb usb2: SerialNumber: sunxi-ohci
- [ 3.572360] hub 2-0:1.0: USB hub found
- [ 3.582746] hub 2-0:1.0: 1 port detected
- [ 3.593638] Initializing USB Mass Storage driver...
- [ 3.605322] usbcore: registered new interface driver usb-storage
- [ 3.618146] USB Mass Storage support registered.
- [ 3.629443] usbcore: registered new interface driver ums-alauda
- [ 3.642207] usbcore: registered new interface driver ums-cypress
- [ 3.654978] usbcore: registered new interface driver ums-datafab
- [ 3.667723] usbcore: registered new interface driver ums_eneub6250
- [ 3.680629] usbcore: registered new interface driver ums-freecom
- [ 3.690119] usb 1-1: new high-speed USB device number 2 using sunxi-ehci
- [ 3.706839] usbcore: registered new interface driver ums-isd200
- [ 3.719575] usbcore: registered new interface driver ums-jumpshot
- [ 3.732460] usbcore: registered new interface driver ums-karma
- [ 3.745022] usbcore: registered new interface driver ums-onetouch
- [ 3.757824] usbcore: registered new interface driver ums-realtek
- [ 3.770484] usbcore: registered new interface driver ums-sddr09
- [ 3.783002] usbcore: registered new interface driver ums-sddr55
- [ 3.795477] usbcore: registered new interface driver ums-usbat
- [ 3.807899] usbcore: registered new interface driver usbserial
- [ 3.820219] usbcore: registered new interface driver usbserial_generic
- [ 3.833296] USB Serial support registered for generic
- [ 3.870682] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101
- [ 3.884034] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
- [ 3.897896] usb 1-1: Product: USB 2.0 Hub
- [ 3.908949] hub 1-1:1.0: USB hub found
- [ 3.919178] hub 1-1:1.0: 4 ports detected
- [ 3.930736] usbserial: USB Serial Driver core
- [ 3.941905] file system registered
- [ 3.953522] android_usb gadget: Mass Storage Function, version: 2009/09/11
- [ 3.967225] android_usb gadget: Number of LUNs=3
- [ 3.978335] lun0: LUN: removable file: (no medium)
- [ 3.989702] lun1: LUN: removable file: (no medium)
- [ 4.000994] lun2: LUN: removable file: (no medium)
- [ 4.012569] android_usb gadget: android_usb ready
- [ 4.024041] axp81x_dcdc1: Failed to create debugfs directory
- [ 4.036354] sunxi_hcd_host0 sunxi_hcd_host0: sunxi_hcd host driver
- [ 4.049068] sunxi_hcd_host0 sunxi_hcd_host0: new USB bus registered, assigned bus number 3
- [ 4.064316] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
- [ 4.081930] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
- [ 4.099856] usb usb3: Product: sunxi_hcd host driver
- [ 4.115087] usb usb3: Manufacturer: Linux 3.4.39-BPI-M3-Kernel sunxi_hcd-hcd
- [ 4.132892] usb usb3: SerialNumber: sunxi_hcd_host0
- [ 4.148994] hub 3-0:1.0: USB hub found
- [ 4.162938] hub 3-0:1.0: 1 port detected
- [ 4.178267] mousedev: PS/2 mouse device common for all mice
- [ 4.190604] sunxikbd_script_init: key para not found, used default para.
- [ 4.204825] sunxi_rtc_init(796): sunxi rtc device register!
- [ 4.204922] keyname:ctp_para subname:ctp_power_io ,get error!
- [ 4.229707] rtc_gettime(333): read time 1970-1-1 1:0:11
- [ 4.229736] get sysconfig para erro!
- [ 4.229758] get sysconfig para erro!
- [ 4.229778] get sysconfig para erro!
- [ 4.229797] get sysconfig para erro!
- [ 4.229844] ctp_wakeup: !!!!gpio data 1
- [ 4.289234] alarm_gettime(470): get alarm time 1970-1-1 1:0:0 success!
- [ 4.302401] rtc_gettime(333): read time 1970-1-1 1:0:11
- [ 4.313883] rtc0 rtc0: rtc core: registered rtc0 as rtc0
- [ 4.325412] sunxi_rtc_probe(756)!
- [ 4.334483] get sysconfig para erro!
- [ 4.334532] i2c /dev entries driver
- [ 4.335262] IR RC5(x) protocol handler initialized
- [ 4.335438] sunxi cedar version 0.1
- [ 4.335519] [cedar]: install start!!!
- [ 4.335763] [cedar]: install end!!!
- [ 4.341762] Bluetooth: HCI UART driver ver 2.2
- [ 4.341774] Bluetooth: HCI H4 protocol initialized
- [ 4.341782] Bluetooth: HCI BCSP protocol initialized
- [ 4.341791] Bluetooth: HCI Realtek H5 protocol initialized
- [ 4.342453] sunxi_get_soc_bin: slow chip
- [ 4.345160] [mmc]: SD/MMC/SDIO Host Controller Driver(v1.113 2015-5-20 17:17) Compiled in Sep 24 2015 at 20:39:47
- [ 4.345196] [mmc]: get mmc1's sdc_power is null!
- [ 4.345207] [mmc]: MMC host used card: 0x3, boot card: 0x1, io_card 2
- [ 4.453311] [mmc]: sdc0 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 4.467349] [mmc]: sdc0 set ios: clk 0Hz bm PP pm UP vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 4.480569] [mmc]: sdc1 set ios: clk 0Hz bm OD pm OFF vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 4.496433] sunxi_leds_fetch_sysconfig_para leds is not used in config
- [ 4.507014] =========script_get_err============
- [ 4.510030] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 4.529081] Registered led device: sunxi_respiration_lamp
- [ 4.538622] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 52, RTO !!
- [ 4.551217] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 52, RTO !!
- [ 4.563014] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 4.563848] usbcore: registered new interface driver usbhid
- [ 4.563853] usbhid: USB HID core driver
- [ 4.564442] ac100_probe,line:2925
- [ 4.566522] [AC100] gpio [363] map to virq [11] ok
- [ 4.594177] ------------audio_hmic_irq----------
- [ 4.594417] earphone_switch_work
- [ 4.601677] ------------audio_hmic_irq----------
- [ 4.601749] reset_flag:1
- [ 4.620162] earphone_switch_work
- [ 4.651430] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 4.652973] asoc: ac100-aif1 <-> pri_dai mapping ok
- [ 4.653302] asoc: ac100-aif2 <-> bb-voice-dai mapping ok
- [ 4.685507] *******************Try sdio*******************
- [ 4.696201] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5, RTO !!
- [ 4.708867] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5, RTO !!
- [ 4.721162] asoc: ac100-aif1 <-> sec_dai mapping ok
- [ 4.730318] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5, RTO !!
- [ 4.742339] asoc: ac100-aif3 <-> bb-voice-dai mapping ok
- [ 4.751992] [mmc]: *** sunxi_mci_dump_errinfo(L824): smc 0 err, cmd 5, RTO !!
- [ 4.763815] *******************Try sd *******************
- [ 4.764029] asoc: ac100-aif2 <-> bb-voice-dai mapping ok
- [ 4.783900] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 4.785319] asoc: sndhdmi <-> sunxi-hdmiaudio.0 mapping ok
- [ 4.786321] TCP: cubic registered
- [ 4.786775] NET: Registered protocol family 10
- [ 4.787491] Mobile IPv6
- [ 4.787502] NET: Registered protocol family 17
- [ 4.787678] Bluetooth: RFCOMM TTY layer initialized
- [ 4.787694] Bluetooth: RFCOMM socket layer initialized
- [ 4.787701] Bluetooth: RFCOMM ver 1.11
- [ 4.787707] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
- [ 4.787712] Bluetooth: BNEP filters: protocol multicast
- [ 4.787727] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
- [ 4.787851] lib80211: common routines for IEEE802.11 drivers
- [ 4.787859] lib80211_crypt: registered algorithm 'NULL'
- [ 4.787992] Registering the dns_resolver key type
- [ 4.924429] VFP support v0.3: [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 4.927023] [mmc]: sdc0 set ios: clk 400000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 4.954509] implementor 41 architecture 2 part 30 variant 7 rev 5
- [ 4.965350] ThumbEE CPU extension supported.
- [ 4.974184] Registering SWP/SWPB emulation handler
- [ 4.981532] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 4.981633] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing LEGACY(SDR12) dt B
- [ 4.985696] [mmc]: sdc0 set ios: clk 25000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
- [ 4.985753] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 1 timing SD-HS(SDR25) dt B
- [ 4.985863] [mmc]: sdc0 set ios: clk 50000000Hz bm PP pm ON vdd 3.3V width 4 timing SD-HS(SDR25) dt B
- [ 4.985924] mmc0: new high speed SDHC card at address e624
- [ 4.986239] mmcblk0: mmc0:e624 SU08G 7.40 GiB
- [ 4.988170] mmcblk0: p1 p2
- [ 4.988740] *******************sd init ok*******************
- [ 5.092297] sunxi_bootup_extend_init: bootup extend state 1
- [ 5.103426] cmdline,disp=20b0000
- [ 5.111080] [HDMI] power vcc-hdmi-18
- [ 5.120312] rtc_gettime(333): read time 1970-1-1 1:0:12
- [ 5.130152] rtc0 rtc0: setting system clock to 1970-01-01 01:00:12 UTC (3612)
- [ 5.142944] sunxi_get_soc_bin: slow chip
- [ 5.151696] CPU Budget:Register notifier
- [ 5.159902] CPU Budget:register Success
- [ 5.167940] sunxi-budget-cooling sunxi-budget-cooling: Cooling device registered: thermal-budget-0
- [ 5.185272] =========GPS========= :gsp not used in configuration
- [ 5.195919] ALSA device list:
- [ 5.203076] #0: snddaudio
- [ 5.209927] #1: sndhdmi
- [ 5.217727] EXT4-fs (mmcblk0p2): couldn't mount as ext3 due to feature incompatibilities
- [ 5.340645] EXT4-fs (mmcblk0p2): couldn't mount as ext2 due to feature incompatibilities
- [ 5.710063] [DISP] disp_hdmi_set_detect,line:404:hdmi1's mgr is NULL
- [ 5.720203] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
- [ 5.720261] VFS: Mounted root (ext4 filesystem) on device 179:2.
- [ 5.721739] [DISP] disp_device_attached_and_enable,line:159:attched ok, mgr0<-->device1, type=4, mode=10
- [ 5.721751] devtmpfs: mounted
- [ 5.722196] Freeing init memory: 324K
- [ 5.722241] Failed to execute /init. Attempting defaults...
- [ 6.458553] udevd[226]: starting version 175
- [ 6.505098] Unable to handle kernel paging request at virtual address 0000b950
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement