SHARE
TWEET

Untitled

a guest Sep 16th, 2019 108 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. smartctl 6.2 2013-07-26 r3841 [x86_64-linux-3.13.0-106-generic] (local build)
  2. Copyright (C) 2002-13, Bruce Allen, Christian Franke, www.smartmontools.org
  3.  
  4. === START OF INFORMATION SECTION ===
  5. Model Family:     Toshiba 3.5" HDD DT01ACA...
  6. Device Model:     TOSHIBA DT01ACA300
  7. Serial Number:    86M5YVYAS
  8. LU WWN Device Id: 5 000039 fe6c2b5fb
  9. Firmware Version: MX6OABB0
  10. User Capacity:    3,000,592,982,016 bytes [3.00 TB]
  11. Sector Sizes:     512 bytes logical, 4096 bytes physical
  12. Rotation Rate:    7200 rpm
  13. Device is:        In smartctl database [for details use: -P show]
  14. ATA Version is:   ATA8-ACS T13/1699-D revision 4
  15. SATA Version is:  SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
  16. Local Time is:    Mon Sep 16 13:07:09 2019 CEST
  17. SMART support is: Available - device has SMART capability.
  18. SMART support is: Enabled
  19.  
  20. === START OF READ SMART DATA SECTION ===
  21. SMART overall-health self-assessment test result: FAILED!
  22. Drive failure expected in less than 24 hours. SAVE ALL DATA.
  23. See vendor-specific Attribute list for failed Attributes.
  24.  
  25. General SMART Values:
  26. Offline data collection status:  (0x84) Offline data collection activity
  27.                                         was suspended by an interrupting command from host.
  28.                                         Auto Offline Data Collection: Enabled.
  29. Self-test execution status:      ( 121) The previous self-test completed having
  30.                                         the read element of the test failed.
  31. Total time to complete Offline
  32. data collection:                (21648) seconds.
  33. Offline data collection
  34. capabilities:                    (0x5b) SMART execute Offline immediate.
  35.                                         Auto Offline data collection on/off support.
  36.                                         Suspend Offline collection upon new
  37.                                         command.
  38.                                         Offline surface scan supported.
  39.                                         Self-test supported.
  40.                                         No Conveyance Self-test supported.
  41.                                         Selective Self-test supported.
  42. SMART capabilities:            (0x0003) Saves SMART data before entering
  43.                                         power-saving mode.
  44.                                         Supports SMART auto save timer.
  45. Error logging capability:        (0x01) Error logging supported.
  46.                                         General Purpose Logging supported.
  47. Short self-test routine
  48. recommended polling time:        (   1) minutes.
  49. Extended self-test routine
  50. recommended polling time:        ( 361) minutes.
  51. SCT capabilities:              (0x003d) SCT Status supported.
  52.                                         SCT Error Recovery Control supported.
  53.                                         SCT Feature Control supported.
  54.                                         SCT Data Table supported.
  55.  
  56. SMART Attributes Data Structure revision number: 16
  57. Vendor Specific SMART Attributes with Thresholds:
  58. ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE      UPDATED  WHEN_FAILED RAW_VALUE
  59.   1 Raw_Read_Error_Rate     0x000b   070   070   016    Pre-fail  Always       -       314376192
  60.   2 Throughput_Performance  0x0005   140   140   054    Pre-fail  Offline      -       68
  61.   3 Spin_Up_Time            0x0007   145   145   024    Pre-fail  Always       -       395 (Average 393)
  62.   4 Start_Stop_Count        0x0012   100   100   000    Old_age   Always       -       37
  63.   5 Reallocated_Sector_Ct   0x0033   001   001   005    Pre-fail  Always   FAILING_NOW 640
  64.   7 Seek_Error_Rate         0x000b   100   100   067    Pre-fail  Always       -       0
  65.   8 Seek_Time_Performance   0x0005   001   001   020    Pre-fail  Offline  FAILING_NOW 128
  66.   9 Power_On_Hours          0x0012   097   097   000    Old_age   Always       -       24615
  67.  10 Spin_Retry_Count        0x0013   100   100   060    Pre-fail  Always       -       0
  68.  12 Power_Cycle_Count       0x0032   100   100   000    Old_age   Always       -       37
  69. 192 Power-Off_Retract_Count 0x0032   100   100   000    Old_age   Always       -       740
  70. 193 Load_Cycle_Count        0x0012   100   100   000    Old_age   Always       -       740
  71. 194 Temperature_Celsius     0x0002   200   200   000    Old_age   Always       -       30 (Min/Max 23/35)
  72. 196 Reallocated_Event_Count 0x0032   067   067   000    Old_age   Always       -       774
  73. 197 Current_Pending_Sector  0x0022   001   001   000    Old_age   Always       -       11192
  74. 198 Offline_Uncorrectable   0x0008   100   100   000    Old_age   Offline      -       3
  75. 199 UDMA_CRC_Error_Count    0x000a   200   200   000    Old_age   Always       -       0
  76.  
  77. SMART Error Log Version: 1
  78. ATA Error Count: 1508 (device log contains only the most recent five errors)
  79.         CR = Command Register [HEX]
  80.         FR = Features Register [HEX]
  81.         SC = Sector Count Register [HEX]
  82.         SN = Sector Number Register [HEX]
  83.         CL = Cylinder Low Register [HEX]
  84.         CH = Cylinder High Register [HEX]
  85.         DH = Device/Head Register [HEX]
  86.         DC = Device Command Register [HEX]
  87.         ER = Error register [HEX]
  88.         ST = Status register [HEX]
  89. Powered_Up_Time is measured from power on, and printed as
  90. DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
  91. SS=sec, and sss=millisec. It "wraps" after 49.710 days.
  92.  
  93. Error 1508 occurred at disk power-on lifetime: 24150 hours (1006 days + 6 hours)
  94.   When the command that caused the error occurred, the device was active or idle.
  95.  
  96.   After command completion occurred, registers were:
  97.   ER ST SC SN CL CH DH
  98.   -- -- -- -- -- -- --
  99.   40 51 e0 20 8d 7b 08  Error: UNC at LBA = 0x087b8d20 = 142314784
  100.  
  101.   Commands leading to the command that caused the error were:
  102.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  103.   -- -- -- -- -- -- -- --  ----------------  --------------------
  104.   60 e0 30 20 8d 7b 40 08   1d+04:25:55.753  READ FPDMA QUEUED
  105.   ef 10 02 00 00 00 a0 08   1d+04:25:55.745  SET FEATURES [Enable SATA feature]
  106.   27 00 00 00 00 00 e0 08   1d+04:25:55.745  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  107.   ec 00 00 00 00 00 a0 08   1d+04:25:55.743  IDENTIFY DEVICE
  108.   ef 03 46 00 00 00 a0 08   1d+04:25:55.743  SET FEATURES [Set transfer mode]
  109.  
  110. Error 1507 occurred at disk power-on lifetime: 24150 hours (1006 days + 6 hours)
  111.   When the command that caused the error occurred, the device was active or idle.
  112.  
  113.   After command completion occurred, registers were:
  114.   ER ST SC SN CL CH DH
  115.   -- -- -- -- -- -- --
  116.   40 51 38 c8 1b 72 0b  Error: UNC at LBA = 0x0b721bc8 = 192027592
  117.  
  118.   Commands leading to the command that caused the error were:
  119.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  120.   -- -- -- -- -- -- -- --  ----------------  --------------------
  121.   60 e0 28 20 8d 7b 40 08   1d+04:25:51.861  READ FPDMA QUEUED
  122.   60 38 20 c8 1b 72 40 08   1d+04:25:51.861  READ FPDMA QUEUED
  123.   ef 10 02 00 00 00 a0 08   1d+04:25:51.853  SET FEATURES [Enable SATA feature]
  124.   27 00 00 00 00 00 e0 08   1d+04:25:51.853  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  125.   ec 00 00 00 00 00 a0 08   1d+04:25:51.851  IDENTIFY DEVICE
  126.  
  127. Error 1506 occurred at disk power-on lifetime: 24150 hours (1006 days + 6 hours)
  128.   When the command that caused the error occurred, the device was active or idle.
  129.  
  130.   After command completion occurred, registers were:
  131.   ER ST SC SN CL CH DH
  132.   -- -- -- -- -- -- --
  133.   40 51 80 48 1b 72 0b  Error: UNC at LBA = 0x0b721b48 = 192027464
  134.  
  135.   Commands leading to the command that caused the error were:
  136.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  137.   -- -- -- -- -- -- -- --  ----------------  --------------------
  138.   60 38 18 c8 1b 72 40 08   1d+04:25:48.068  READ FPDMA QUEUED
  139.   60 e0 10 20 8d 7b 40 08   1d+04:25:48.068  READ FPDMA QUEUED
  140.   60 80 08 48 1b 72 40 08   1d+04:25:48.068  READ FPDMA QUEUED
  141.   ef 10 02 00 00 00 a0 08   1d+04:25:48.060  SET FEATURES [Enable SATA feature]
  142.   27 00 00 00 00 00 e0 08   1d+04:25:48.060  READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
  143.  
  144. Error 1505 occurred at disk power-on lifetime: 24150 hours (1006 days + 6 hours)
  145.   When the command that caused the error occurred, the device was active or idle.
  146.  
  147.   After command completion occurred, registers were:
  148.   ER ST SC SN CL CH DH
  149.   -- -- -- -- -- -- --
  150.   40 51 70 80 35 b3 0b  Error: UNC at LBA = 0x0bb33580 = 196294016
  151.  
  152.   Commands leading to the command that caused the error were:
  153.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  154.   -- -- -- -- -- -- -- --  ----------------  --------------------
  155.   60 38 00 c8 1b 72 40 08   1d+04:25:44.357  READ FPDMA QUEUED
  156.   60 80 f0 48 1b 72 40 08   1d+04:25:44.357  READ FPDMA QUEUED
  157.   60 70 e8 80 35 b3 40 08   1d+04:25:44.357  READ FPDMA QUEUED
  158.   60 e0 e0 20 8d 7b 40 08   1d+04:25:44.357  READ FPDMA QUEUED
  159.   ef 10 02 00 00 00 a0 08   1d+04:25:44.349  SET FEATURES [Enable SATA feature]
  160.  
  161. Error 1504 occurred at disk power-on lifetime: 24150 hours (1006 days + 6 hours)
  162.   When the command that caused the error occurred, the device was active or idle.
  163.  
  164.   After command completion occurred, registers were:
  165.   ER ST SC SN CL CH DH
  166.   -- -- -- -- -- -- --
  167.   40 51 80 c8 1a 72 0b  Error: UNC at LBA = 0x0b721ac8 = 192027336
  168.  
  169.   Commands leading to the command that caused the error were:
  170.   CR FR SC SN CL CH DH DC   Powered_Up_Time  Command/Feature_Name
  171.   -- -- -- -- -- -- -- --  ----------------  --------------------
  172.   60 e0 d8 20 8d 7b 40 08   1d+04:25:40.465  READ FPDMA QUEUED
  173.   60 70 d0 80 35 b3 40 08   1d+04:25:40.465  READ FPDMA QUEUED
  174.   60 80 c8 48 1b 72 40 08   1d+04:25:40.465  READ FPDMA QUEUED
  175.   60 38 c0 c8 1b 72 40 08   1d+04:25:40.465  READ FPDMA QUEUED
  176.   60 80 b8 c8 1a 72 40 08   1d+04:25:40.465  READ FPDMA QUEUED
  177.  
  178. SMART Self-test log structure revision number 1
  179. Num  Test_Description    Status                  Remaining  LifeTime(hours)  LBA_of_first_error
  180. # 1  Short offline       Completed: read failure       90%     24604         2673055535
  181. # 2  Extended offline    Completed: read failure       20%     24561         -
  182. # 3  Short offline       Completed without error       00%     24532         -
  183. # 4  Short offline       Completed without error       00%     24508         -
  184. # 5  Short offline       Completed: read failure       90%     24484         3727434880
  185. # 6  Short offline       Completed without error       00%     24460         -
  186. # 7  Short offline       Completed without error       00%     24436         -
  187. # 8  Extended offline    Completed without error       00%     24394         -
  188. # 9  Short offline       Completed without error       00%     24364         -
  189. #10  Short offline       Completed without error       00%     24340         -
  190. #11  Short offline       Completed without error       00%     24316         -
  191. #12  Short offline       Completed without error       00%     24292         -
  192. #13  Short offline       Completed: read failure       90%     24268         3680138088
  193. #14  Extended offline    Completed: read failure       90%     24220         -
  194. #15  Short offline       Completed without error       00%     24196         -
  195. #16  Short offline       Completed: read failure       90%     24172         3943790693
  196. #17  Short offline       Completed without error       00%     24148         -
  197. #18  Short offline       Completed without error       00%     24124         -
  198. #19  Short offline       Completed without error       00%     24101         -
  199. #20  Extended offline    Completed without error       00%     24062         -
  200. #21  Short offline       Completed without error       00%     24028         -
  201. 3 of 6 failed self-tests are outdated by newer successful extended offline self-test # 8
  202.  
  203. SMART Selective self-test log data structure revision number 1
  204.  SPAN  MIN_LBA  MAX_LBA  CURRENT_TEST_STATUS
  205.     1        0        0  Not_testing
  206.     2        0        0  Not_testing
  207.     3        0        0  Not_testing
  208.     4        0        0  Not_testing
  209.     5        0        0  Not_testing
  210. Selective self-test flags (0x0):
  211.   After scanning selected spans, do NOT read-scan remainder of disk.
  212. If Selective self-test is pending on power-up, resume after 0 minute delay.
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
 
Top