SHARE
TWEET

coreboot dmesg / GA-MA785GMT-UD2H / Athlon II X2 245

a guest Mar 14th, 2013 47 Never
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
  1. [    0.000000] Initializing cgroup subsys cpuset
  2. [    0.000000] Initializing cgroup subsys cpu
  3. [    0.000000] Linux version 2.6.24-32-generic (root@seagoon.gnewsense.org) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu3)) #1 SMP Fri Dec 28 09:01:30 UTC 2012 (Ubuntu 2.6.24-32.107gnewsense10-generic)
  4. [    0.000000] BIOS-provided physical RAM map:
  5. [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
  6. [    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
  7. [    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
  8. [    0.000000]  BIOS-e820: 0000000000100000 - 000000006ffde000 (usable)
  9. [    0.000000]  BIOS-e820: 000000006ffde000 - 0000000080000000 (reserved)
  10. [    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
  11. [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
  12. [    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
  13. [    0.000000] 895MB HIGHMEM available.
  14. [    0.000000] 896MB LOWMEM available.
  15. [    0.000000] found SMP MP-table at 000fdaa0
  16. [    0.000000] Entering add_active_range(0, 0, 458718) 0 entries of 256 used
  17. [    0.000000] Zone PFN ranges:
  18. [    0.000000]   DMA             0 ->     4096
  19. [    0.000000]   Normal       4096 ->   229376
  20. [    0.000000]   HighMem    229376 ->   458718
  21. [    0.000000] Movable zone start PFN for each node
  22. [    0.000000] early_node_map[1] active PFN ranges
  23. [    0.000000]     0:        0 ->   458718
  24. [    0.000000] On node 0 totalpages: 458718
  25. [    0.000000]   DMA zone: 32 pages used for memmap
  26. [    0.000000]   DMA zone: 0 pages reserved
  27. [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
  28. [    0.000000]   Normal zone: 1760 pages used for memmap
  29. [    0.000000]   Normal zone: 223520 pages, LIFO batch:31
  30. [    0.000000]   HighMem zone: 1791 pages used for memmap
  31. [    0.000000]   HighMem zone: 227551 pages, LIFO batch:31
  32. [    0.000000]   Movable zone: 0 pages used for memmap
  33. [    0.000000] DMI present.
  34. [    0.000000] ACPI: RSDP signature @ 0xC00FDA80 checksum 0
  35. [    0.000000] ACPI: RSDP 000FDA80, 0014 (r0 CORE  )
  36. [    0.000000] ACPI: RSDT 6FFE2424, 003C (r1 CORE   COREBOOT        0 CORE        0)
  37. [    0.000000] ACPI: HPET 6FFE24C8, 0038 (r1 CORE   COREBOOT        0 CORE        0)
  38. [    0.000000] ACPI: APIC 6FFE2500, 005C (r1 CORE   COREBOOT        0 CORE        0)
  39. [    0.000000] ACPI: SRAT 6FFE2560, 00A0 (r1 CORE   COREBOOT        0 CORE        0)
  40. [    0.000000] ACPI: SLIT 6FFE2600, 002D (r1 CORE   COREBOOT        0 CORE        0)
  41. [    0.000000] ACPI: SSDT 6FFE2630, 0635 (r1 AMD-FA AMD-ACPI  6040000 INTL 20100528)
  42. [    0.000000] ACPI: FACP 6FFE5638, 00F4 (r3 CORE   COREBOOT        0 CORE        0)
  43. [    0.000000] ACPI: DSDT 6FFE2C68, 298C (r2 GIGA   COREBOOT    10001 INTL 20100528)
  44. [    0.000000] ACPI: FACS 6FFE55F8, 0040
  45. [    0.000000] ATI board detected. Disabling timer routing over 8254.
  46. [    0.000000] ACPI: PM-Timer IO Port: 0x818
  47. [    0.000000] ACPI: Local APIC address 0xfee00000
  48. [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  49. [    0.000000] Processor #0 0:6 APIC version 16
  50. [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
  51. [    0.000000] Processor #1 0:6 APIC version 16
  52. [    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
  53. [    0.000000] IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23
  54. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  55. [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
  56. [    0.000000] ACPI: IRQ0 used by override.
  57. [    0.000000] ACPI: IRQ2 used by override.
  58. [    0.000000] ACPI: IRQ9 used by override.
  59. [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
  60. [    0.000000] ACPI: HPET id: 0x43538301 base: 0xfed00000
  61. [    0.000000] Using ACPI (MADT) for SMP configuration information
  62. [    0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:60000000)
  63. [    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
  64. [    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000
  65. [    0.000000] swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000
  66. [    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 455135
  67. [    0.000000] Kernel command line: root=UUID=9e538d1d-ce52-468e-92c9-bdacad7bc7d6 ro quiet splash
  68. [    0.000000] mapped APIC to ffffb000 (fee00000)
  69. [    0.000000] mapped IOAPIC to ffffa000 (fec00000)
  70. [    0.000000] Enabling fast FPU save and restore... done.
  71. [    0.000000] Enabling unmasked SIMD FPU exception support... done.
  72. [    0.000000] Initializing CPU#0
  73. [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
  74. [    0.000000] Detected 2907.285 MHz processor.
  75. [   38.572926] Console: colour VGA+ 80x25
  76. [   38.572928] console [tty0] enabled
  77. [   38.573072] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  78. [   38.573268] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  79. [   38.608999] Memory: 1807224k/1834872k available (2180k kernel code, 26436k reserved, 1011k data, 368k init, 917368k highmem)
  80. [   38.609004] virtual kernel memory layout:
  81. [   38.609005]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
  82. [   38.609006]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
  83. [   38.609007]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
  84. [   38.609007]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
  85. [   38.609008]       .init : 0xc0423000 - 0xc047f000   ( 368 kB)
  86. [   38.609009]       .data : 0xc032107a - 0xc041ddc4   (1011 kB)
  87. [   38.609010]       .text : 0xc0100000 - 0xc032107a   (2180 kB)
  88. [   38.609012] Checking if this processor honours the WP bit even in supervisor mode... Ok.
  89. [   38.609034] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
  90. [   38.609165] hpet clockevent registered
  91. [   38.609204] Calibrating delay loop (skipped), using tsc calculated value.. 5814.57 BogoMIPS (lpj=11629140)
  92. [   38.609217] Security Framework initialized
  93. [   38.609220] SELinux:  Disabled at boot.
  94. [   38.609228] AppArmor: AppArmor initialized
  95. [   38.609230] Failure registering capabilities with primary security module.
  96. [   38.609236] Mount-cache hash table entries: 512
  97. [   38.609300] Initializing cgroup subsys ns
  98. [   38.609303] Initializing cgroup subsys cpuacct
  99. [   38.609309] CPU: After generic identify, caps: 178bfbff efd3fbff 00000000 00000000 00802009 00000000 000037ff 00000000
  100. [   38.609316] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  101. [   38.609318] CPU: L2 Cache: 1024K (64 bytes/line)
  102. [   38.609320] CPU 0(2) -> Core 0
  103. [   38.609322] CPU: After all inits, caps: 178bfbff efd3fbff 00000000 00020510 00802001 00000000 000037ff 00000000
  104. [   38.609330] Compat vDSO mapped to ffffe000.
  105. [   38.609336] Checking 'hlt' instruction... OK.
  106. [   38.625322] SMP alternatives: switching to UP code
  107. [   38.626026] Early unpacking initramfs... done
  108. [   38.819813] ACPI: Core revision 20070126
  109. [   38.819839] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
  110. [   38.820679] CPU0: AMD Athlon(tm) II X2 245 Processor stepping 02
  111. [   38.820689] SMP alternatives: switching to SMP code
  112. [   38.820999] Booting processor 1/1 eip 3000
  113. [   38.830988] Initializing CPU#1
  114. [   38.908980] Calibrating delay using timer specific routine.. 5814.46 BogoMIPS (lpj=11628920)
  115. [   38.908984] CPU: After generic identify, caps: 178bfbff efd3fbff 00000000 00000000 00802009 00000000 000037ff 00000000
  116. [   38.908988] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
  117. [   38.908990] CPU: L2 Cache: 1024K (64 bytes/line)
  118. [   38.908991] CPU 1(2) -> Core 1
  119. [   38.908993] CPU: After all inits, caps: 178bfbff efd3fbff 00000000 00020510 00802001 00000000 000037ff 00000000
  120. [   38.909198] CPU1: AMD Athlon(tm) II X2 245 Processor stepping 02
  121. [   38.909218] Total of 2 processors activated (11629.03 BogoMIPS).
  122. [   38.909645] ENABLING IO-APIC IRQs
  123. [   38.909929] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
  124. [   39.056961] Brought up 2 CPUs
  125. [   39.057000] CPU0 attaching sched-domain:
  126. [   39.057002]  domain 0: span 03
  127. [   39.057003]   groups: 01 02
  128. [   39.057005] CPU1 attaching sched-domain:
  129. [   39.057006]  domain 0: span 03
  130. [   39.057007]   groups: 02 01
  131. [   39.057113] net_namespace: 64 bytes
  132. [   39.057117] Booting paravirtualized kernel on bare hardware
  133. [   39.057428] Time:  1:43:50  Date: 03/12/13
  134. [   39.057441] NET: Registered protocol family 16
  135. [   39.057536] EISA bus registered
  136. [   39.057538] ACPI: bus type pci registered
  137. [   39.057620] PCI: PCI BIOS revision 2.10 entry at 0xfc75b, last bus=4
  138. [   39.057621] PCI: Using configuration type 1
  139. [   39.057625] Setting up standard PCI resources
  140. [   39.058010] mtrr: your CPUs had inconsistent variable MTRR settings
  141. [   39.058011] mtrr: probably your BIOS does not setup all CPUs.
  142. [   39.058012] mtrr: corrected configuration.
  143. [   39.058578] ACPI: EC: Look up EC in DSDT
  144. [   39.060130] ACPI: Interpreter enabled
  145. [   39.060132] ACPI: (supports S0 S1 S2 S3 S4 S5)
  146. [   39.060140] ACPI: Using IOAPIC for interrupt routing
  147. [   39.061616] ACPI: PCI Root Bridge [PCI0] (0000:00)
  148. [   39.062004] pci 0000:00:11.0: set SATA to AHCI mode
  149. [   39.063961] PCI: Transparent bridge - 0000:00:14.4
  150. [   39.063993] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  151. [   39.064055] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGPB._PRT]
  152. [   39.064093] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PBRA._PRT]
  153. [   39.064134] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PIBR._PRT]
  154. [   39.065855] ACPI: PCI Interrupt Link [INTA] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
  155. [   39.065921] ACPI: PCI Interrupt Link [INTB] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
  156. [   39.065987] ACPI: PCI Interrupt Link [INTC] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
  157. [   39.066047] ACPI: PCI Interrupt Link [INTD] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
  158. [   39.066111] ACPI: PCI Interrupt Link [INTE] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
  159. [   39.066175] ACPI: PCI Interrupt Link [INTF] (IRQs 9) *0, disabled.
  160. [   39.066238] ACPI: PCI Interrupt Link [INTG] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
  161. [   39.066302] ACPI: PCI Interrupt Link [INTH] (IRQs 3 4 5 7 10 11 12 15) *0, disabled.
  162. [   39.066370] ACPI: Power Resource [PFN0] (on)
  163. [   39.066392] Linux Plug and Play Support v0.97 (c) Adam Belay
  164. [   39.066406] pnp: PnP ACPI init
  165. [   39.066410] ACPI: bus type pnp registered
  166. [   39.066632] ACPI Error (psargs-0355): [TOM2] Namespace lookup failure, AE_NOT_FOUND
  167. [   39.066635] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._CRS] (Node f7c4efc0), AE_NOT_FOUND
  168. [   39.066935] pnp: PnP ACPI: found 6 devices
  169. [   39.066936] ACPI: ACPI bus type pnp unregistered
  170. [   39.066938] PnPBIOS: Disabled by ACPI PNP
  171. [   39.067040] PCI: Using ACPI for IRQ routing
  172. [   39.067042] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
  173. [   39.088887] NET: Registered protocol family 8
  174. [   39.088889] NET: Registered protocol family 20
  175. [   39.088916] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
  176. [   39.088919] hpet0: 4 32-bit timers, 14318180 Hz
  177. [   39.089948] AppArmor: AppArmor Filesystem Enabled
  178. [   39.092882] Time: hpet clocksource has been installed.
  179. [   39.092894] Switched to high resolution mode on CPU 0
  180. [   39.092946] Switched to high resolution mode on CPU 1
  181. [   39.131125] PCI: Bridge: 0000:00:01.0
  182. [   39.131129]   IO window: 1000-1fff
  183. [   39.131142]   MEM window: d8000000-d81fffff
  184. [   39.131151]   PREFETCH window: c0000000-cfffffff
  185. [   39.131158] PCI: Bridge: 0000:00:0a.0
  186. [   39.131161]   IO window: 2000-2fff
  187. [   39.131164]   MEM window: d8200000-d82fffff
  188. [   39.131170]   PREFETCH window: d0000000-d00fffff
  189. [   39.131176] PCI: Bridge: 0000:00:14.4
  190. [   39.131177]   IO window: disabled.
  191. [   39.131184]   MEM window: d8300000-d83fffff
  192. [   39.131190]   PREFETCH window: disabled.
  193. [   39.131245] PCI: Setting latency timer of device 0000:00:0a.0 to 64
  194. [   39.131266] NET: Registered protocol family 2
  195. [   39.168862] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  196. [   39.169013] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
  197. [   39.169393] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  198. [   39.169584] TCP: Hash tables configured (established 131072 bind 65536)
  199. [   39.169586] TCP reno registered
  200. [   39.180901] checking if image is initramfs... it is
  201. [   39.556255] Freeing initrd memory: 7105k freed
  202. [   39.556823] audit: initializing netlink socket (disabled)
  203. [   39.556832] audit(1363052629.844:1): initialized
  204. [   39.556954] highmem bounce pool size: 64 pages
  205. [   39.558267] VFS: Disk quotas dquot_6.5.1
  206. [   39.558314] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  207. [   39.558388] io scheduler noop registered
  208. [   39.558389] io scheduler anticipatory registered
  209. [   39.558390] io scheduler deadline registered
  210. [   39.558396] io scheduler cfq registered (default)
  211. [   39.558518] Boot video device is 0000:01:05.0
  212. [   39.558629] PCI: Setting latency timer of device 0000:00:0a.0 to 64
  213. [   39.558667] assign_interrupt_mode Found MSI capability
  214. [   39.558728] Allocate Port Service[0000:00:0a.0:pcie00]
  215. [   39.558926] isapnp: Scanning for PnP cards...
  216. [   39.915594] isapnp: No Plug & Play device found
  217. [   39.935124] Real Time Clock Driver v1.12ac
  218. [   39.935227] hpet_resources: 0xfed00000 is busy
  219. [   39.935244] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
  220. [   39.935471] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
  221. [   39.935708] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
  222. [   39.936593] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
  223. [   39.936636] input: Macintosh mouse button emulation as /devices/virtual/input/input0
  224. [   39.936735] PNP: No PS/2 controller found. Probing ports directly.
  225. [   39.970486] serio: i8042 KBD port at 0x60,0x64 irq 1
  226. [   39.985371] mice: PS/2 mouse device common for all mice
  227. [   39.985462] EISA: Probing bus 0 at eisa.0
  228. [   39.985469] Cannot allocate resource for EISA slot 1
  229. [   39.985470] Cannot allocate resource for EISA slot 2
  230. [   39.985472] Cannot allocate resource for EISA slot 3
  231. [   39.985495] EISA: Detected 0 cards.
  232. [   39.985496] cpuidle: using governor ladder
  233. [   39.985498] cpuidle: using governor menu
  234. [   39.985543] NET: Registered protocol family 1
  235. [   39.985557] Using IPI No-Shortcut mode
  236. [   39.985573] registered taskstats version 1
  237. [   39.985654]   Magic number: 5:668:710
  238. [   39.985698] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
  239. [   39.985700] EDD information not available.
  240. [   39.985814] Freeing unused kernel memory: 368k freed
  241. [   39.985828] Write protecting the kernel read-only data: 804k
  242. [   41.107907] fuse init (API version 7.9)
  243. [   41.116527] ACPI: Fan [FAN0] (on)
  244. [   41.119555] ACPI: Processor [CPU0] (supports 8 throttling states)
  245. [   41.119601] ACPI Exception (processor_core-0824): AE_NOT_FOUND, Processor Device is not present [20070126]
  246. [   41.119607] ACPI Exception (processor_core-0824): AE_NOT_FOUND, Processor Device is not present [20070126]
  247. [   41.143666] ACPI: Thermal Zone [TZ00] (40 C)
  248. [   41.283444] SCSI subsystem initialized
  249. [   41.290101] libata version 3.00 loaded.
  250. [   41.353077] usbcore: registered new interface driver usbfs
  251. [   41.353090] usbcore: registered new interface driver hub
  252. [   41.353146] ahci 0000:00:11.0: version 3.0
  253. [   41.353170] ACPI: PCI Interrupt 0000:00:11.0[A] -> GSI 22 (level, low) -> IRQ 16
  254. [   41.353242] ahci 0000:00:11.0: controller can't do PMP, turning off CAP_PMP
  255. [   41.353957] usbcore: registered new device driver usb
  256. [   41.354608] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
  257. [   41.357617] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
  258. [   41.357620] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
  259. [   42.354868] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
  260. [   42.354872] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pio slum part
  261. [   42.355090] scsi0 : ahci
  262. [   42.355205] scsi1 : ahci
  263. [   42.355273] scsi2 : ahci
  264. [   42.355340] scsi3 : ahci
  265. [   42.355386] ata1: SATA max UDMA/133 abar m1024@0xd8409000 port 0xd8409100 irq 222
  266. [   42.355392] ata2: SATA max UDMA/133 abar m1024@0xd8409000 port 0xd8409180 irq 222
  267. [   42.355397] ata3: SATA max UDMA/133 abar m1024@0xd8409000 port 0xd8409200 irq 222
  268. [   42.355400] ata4: SATA max UDMA/133 abar m1024@0xd8409000 port 0xd8409280 irq 222
  269. [   42.831507] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
  270. [   42.848894] ata1.00: HPA unlocked: 2930277168 -> 2930277168, native 18446744072344861488
  271. [   42.848898] ata1.00: ATA-8: WDC WD15EADS-00P8B0, 01.00A01, max UDMA/133
  272. [   42.848900] ata1.00: 2930277168 sectors, multi 0: LBA48 NCQ (depth 31/32)
  273. [   42.855959] ata1.00: configured for UDMA/133
  274. [   43.166296] ata2: SATA link down (SStatus 0 SControl 300)
  275. [   43.478092] ata3: SATA link down (SStatus 0 SControl 300)
  276. [   43.790878] ata4: SATA link down (SStatus 0 SControl 300)
  277. [   43.790954] scsi 0:0:0:0: Direct-Access     ATA      WDC WD15EADS-00P 01.0 PQ: 0 ANSI: 5
  278. [   43.791716] r8169 Gigabit Ethernet driver 2.2LK loaded
  279. [   43.791736] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 17
  280. [   43.791751] PCI: Setting latency timer of device 0000:03:00.0 to 64
  281. [   43.791957] eth0: RTL8168c/8111c at 0xf887e000, ff:ff:ff:ff:ff:ff, XID 3c4000c0 IRQ 221
  282. [   43.793797] ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 16 (level, low) -> IRQ 18
  283. [   43.793809] ohci_hcd 0000:00:12.0: OHCI Host Controller
  284. [   43.793962] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 1
  285. [   43.793993] ohci_hcd 0000:00:12.0: irq 18, io mem 0xd8404000
  286. [   43.797708] Driver 'sd' needs updating - please use bus_type methods
  287. [   43.806888] sd 0:0:0:0: [sda] 2930277168 512-byte hardware sectors (1500302 MB)
  288. [   43.806895] sd 0:0:0:0: [sda] Write Protect is off
  289. [   43.806897] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  290. [   43.806905] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  291. [   43.806932] sd 0:0:0:0: [sda] 2930277168 512-byte hardware sectors (1500302 MB)
  292. [   43.806936] sd 0:0:0:0: [sda] Write Protect is off
  293. [   43.806938] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
  294. [   43.806945] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  295. [   43.806947]  sda: sda1 sda2 sda3
  296. [   43.822388] sd 0:0:0:0: [sda] Attached SCSI disk
  297. [   43.825186] sd 0:0:0:0: Attached scsi generic sg0 type 0
  298. [   43.853889] usb usb1: configuration #1 chosen from 1 choice
  299. [   43.853904] hub 1-0:1.0: USB hub found
  300. [   43.853911] hub 1-0:1.0: 3 ports detected
  301. [   43.953839] ACPI: PCI Interrupt 0000:00:12.1[A] -> GSI 16 (level, low) -> IRQ 18
  302. [   43.953851] ohci_hcd 0000:00:12.1: OHCI Host Controller
  303. [   43.953864] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 2
  304. [   43.953889] ohci_hcd 0000:00:12.1: irq 18, io mem 0xd8405000
  305. [   44.013766] usb usb2: configuration #1 chosen from 1 choice
  306. [   44.013779] hub 2-0:1.0: USB hub found
  307. [   44.013792] hub 2-0:1.0: 3 ports detected
  308. [   44.055334] Attempting manual resume
  309. [   44.055336] swsusp: Resume From Partition 8:2
  310. [   44.055337] PM: Checking swsusp image.
  311. [   44.055461] PM: Resume from disk failed.
  312. [   44.062534] EXT3-fs: INFO: recovery required on readonly filesystem.
  313. [   44.062536] EXT3-fs: write access will be enabled during recovery.
  314. [   44.105506] kjournald starting.  Commit interval 5 seconds
  315. [   44.105511] EXT3-fs: recovery complete.
  316. [   44.105826] EXT3-fs: mounted filesystem with ordered data mode.
  317. [   44.121723] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 18 (level, low) -> IRQ 17
  318. [   44.121740] ohci_hcd 0000:00:13.0: OHCI Host Controller
  319. [   44.121752] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 3
  320. [   44.121785] ohci_hcd 0000:00:13.0: irq 17, io mem 0xd8406000
  321. [   44.177657] usb usb3: configuration #1 chosen from 1 choice
  322. [   44.177670] hub 3-0:1.0: USB hub found
  323. [   44.177683] hub 3-0:1.0: 3 ports detected
  324. [   44.281598] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 18 (level, low) -> IRQ 17
  325. [   44.281609] ohci_hcd 0000:00:13.1: OHCI Host Controller
  326. [   44.281621] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 4
  327. [   44.281636] ohci_hcd 0000:00:13.1: irq 17, io mem 0xd8407000
  328. [   44.341544] usb usb4: configuration #1 chosen from 1 choice
  329. [   44.341556] hub 4-0:1.0: USB hub found
  330. [   44.341566] hub 4-0:1.0: 3 ports detected
  331. [   44.445492] ACPI: PCI Interrupt 0000:00:14.5[C] -> GSI 18 (level, low) -> IRQ 17
  332. [   44.445499] ohci_hcd 0000:00:14.5: OHCI Host Controller
  333. [   44.445508] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 5
  334. [   44.445529] ohci_hcd 0000:00:14.5: irq 17, io mem 0xd8408000
  335. [   44.509439] usb usb5: configuration #1 chosen from 1 choice
  336. [   44.509450] hub 5-0:1.0: USB hub found
  337. [   44.509460] hub 5-0:1.0: 2 ports detected
  338. [   44.609434] ACPI: PCI Interrupt 0000:00:12.2[B] -> GSI 17 (level, low) -> IRQ 19
  339. [   44.609453] ehci_hcd 0000:00:12.2: EHCI Host Controller
  340. [   44.609476] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 6
  341. [   44.609591] ehci_hcd 0000:00:12.2: debug port 1
  342. [   44.609612] ehci_hcd 0000:00:12.2: irq 19, io mem 0xd8409400
  343. [   44.622329] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  344. [   44.622420] usb usb6: configuration #1 chosen from 1 choice
  345. [   44.622434] hub 6-0:1.0: USB hub found
  346. [   44.622437] hub 6-0:1.0: 6 ports detected
  347. [   44.726350] ACPI: PCI Interrupt 0000:00:13.2[B] -> GSI 19 (level, low) -> IRQ 20
  348. [   44.726363] ehci_hcd 0000:00:13.2: EHCI Host Controller
  349. [   44.726377] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 7
  350. [   44.726432] ehci_hcd 0000:00:13.2: debug port 1
  351. [   44.726444] ehci_hcd 0000:00:13.2: irq 20, io mem 0xd8409500
  352. [   44.738312] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  353. [   44.738368] usb usb7: configuration #1 chosen from 1 choice
  354. [   44.738381] hub 7-0:1.0: USB hub found
  355. [   44.738383] hub 7-0:1.0: 6 ports detected
  356. [   44.842305] ATIIXP: IDE controller (0x1002:0x439c rev 0x00) at  PCI slot 0000:00:14.1
  357. [   44.842318] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 18
  358. [   44.842329] ATIIXP: not 100% native mode: will probe irqs later
  359. [   44.842338]     ide0: BM-DMA at 0x3010-0x3017, BIOS settings: hda:DMA, hdb:DMA
  360. [   44.842352]     ide1: BM-DMA at 0x3018-0x301f, BIOS settings: hdc:pio, hdd:pio
  361. [   44.842366] Probing IDE interface ide0...
  362. [   45.373847] usb 1-2: new full speed USB device using ohci_hcd and address 2
  363. [   45.403826] Probing IDE interface ide1...
  364. [   45.598597] usb 1-2: configuration #1 chosen from 1 choice
  365. [   45.969610] ACPI: PCI Interrupt 0000:04:0e.0[A] -> GSI 18 (level, low) -> IRQ 17
  366. [   46.019322] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[17]  MMIO=[d8304000-d83047ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
  367. [   47.155051] input: PC Speaker as /devices/platform/pcspkr/input/input1
  368. [   47.463603] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  369. [   47.479544] shpchp: HPC vendor_id 1022 device_id 9602 ss_vid 0 ss_did 0
  370. [   47.479547] shpchp: shpc_init: cannot reserve MMIO region
  371. [   47.479561] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  372. [   47.563564] piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device
  373. [   47.607415] input: Power Button (FF) as /devices/virtual/input/input2
  374. [   47.652393] ACPI: Power Button (FF) [PWRF]
  375. [   47.652437] input: Power Button (CM) as /devices/virtual/input/input3
  376. [   47.716354] ACPI: Power Button (CM) [PWRB]
  377. [   47.891372] ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 18
  378. [   47.926510] hda_codec: Unknown model for ALC882, trying auto-probe from BIOS...
  379. [   47.962319] ACPI: PCI Interrupt 0000:01:05.1[B] -> GSI 19 (level, low) -> IRQ 20
  380. [   47.962335] PCI: Setting latency timer of device 0000:01:05.1 to 64
  381. [   48.025034] usbcore: registered new interface driver hiddev
  382. [   48.028195] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.0/input/input4
  383. [   48.091149] input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:12.0-2
  384. [   48.095064] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:12.0/usb1/1-2/1-2:1.1/input/input5
  385. [   48.148089] input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:12.0-2
  386. [   48.155741] hiddev97hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:12.0-2
  387. [   48.155751] usbcore: registered new interface driver usbhid
  388. [   48.155753] /srv/gnewsense/tmp/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver
  389. [   48.446591] lp: driver loaded but no devices found
  390. [   48.472081] it87: Device not activated, skipping
  391. [   48.530834] Adding 2144668k swap on /dev/sda2.  Priority:-1 extents:1 across:2144668k
  392. [   49.062884] EXT3 FS on sda1, internal journal
  393. [   49.694220] kjournald starting.  Commit interval 5 seconds
  394. [   49.702215] EXT3 FS on sda3, internal journal
  395. [   49.702219] EXT3-fs: mounted filesystem with ordered data mode.
  396. [   49.933117] ip_tables: (C) 2000-2006 Netfilter Core Team
  397. [   50.278827] No dock devices found.
  398. [   50.960357] NET: Registered protocol family 10
  399. [   50.960488] lo: Disabled Privacy Extensions
  400. [   51.128660] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
  401. [   51.128664] apm: disabled - APM is not SMP safe.
  402. [   51.282415] ppdev: user-space parallel port driver
  403. [   51.397136] audit(1363052642.052:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=4956 profile="/usr/sbin/cupsd" namespace="default"
  404. [   51.952123] Bluetooth: Core ver 2.11
  405. [   51.952393] NET: Registered protocol family 31
  406. [   51.952396] Bluetooth: HCI device and connection manager initialized
  407. [   51.952400] Bluetooth: HCI socket layer initialized
  408. [   51.961659] Bluetooth: L2CAP ver 2.9
  409. [   51.961663] Bluetooth: L2CAP socket layer initialized
  410. [   52.005520] Bluetooth: RFCOMM socket layer initialized
  411. [   52.005531] Bluetooth: RFCOMM TTY layer initialized
  412. [   52.005533] Bluetooth: RFCOMM ver 1.8
  413. [   64.745713] hda-intel: Invalid position buffer, using LPIB read method instead.
RAW Paste Data
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy. OK, I Understand
Top