API tools faq
paste
Guest User

Untitled

a guest
Sep 30th, 2018
171
0
Never
Add comment
Not a member of Pastebin yet? Sign Up, it unlocks many cool features!
text 9.29 KB | None | 0 0
raw download clone embed print report
  1. unielec U7628-01 with my image , standard snapshot with enabled :
  2. initram image
  3. bootargs = "console=ttyS1,57600n8";
  4. boot to ram
  5.  
  6. done
  7. Bytes transferred = 3519336 (35b368 hex)
  8. NetBootFileXferSize= 0035b368
  9. Automatic boot of image at addr 0x80A00000 ...
  10. ## Booting image at 80a00000 ...
  11. Image Name: MIPS OpenWrt Linux-4.14.70
  12. Image Type: MIPS Linux Kernel Image (lzma compressed)
  13. Data Size: 3519272 Bytes = 3.4 MB
  14. Load Address: 80000000
  15. Entry Point: 80000000
  16. Verifying Checksum ... OK
  17. Uncompressing Kernel Image ... OK
  18. No initrd
  19. ## Transferring control to Linux (at address 80000000) ...
  20. ## Giving linux memsize in MB, 64
  21.  
  22. Starting kernel ...
  23.  
  24. [ 0.000000] Linux version 4.14.70 (davidea@unielec) (gcc version 7.3.0 (OpenWrt GCC 7.3.0 r8082-95b3f8e)) #0 Thu Sep 20 20:03:48 2018
  25. [ 0.000000] Board has DDR2
  26. [ 0.000000] Analog PMU set to hw control
  27. [ 0.000000] Digital PMU set to hw control
  28. [ 0.000000] SoC Type: MediaTek MT7628AN ver:1 eco:2
  29. [ 0.000000] bootconsole [early0] enabled
  30. [ 0.000000] CPU0 revision is: 00019655 (MIPS 24KEc)
  31. [ 0.000000] MIPS: machine is UniElec U7628-01 (128M RAM/16M flash)
  32. [ 0.000000] Determined physical RAM map:
  33. [ 0.000000] memory: 08000000 @ 00000000 (usable)
  34. [ 0.000000] Initrd not found or empty - disabling initrd
  35. [ 0.000000] Primary instruction cache 64kB, VIPT, 4-way, linesize 32 bytes.
  36. [ 0.000000] Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
  37. [ 0.000000] Zone ranges:
  38. [ 0.000000] Normal [mem 0x0000000000000000-0x0000000007ffffff]
  39. [ 0.000000] Movable zone start for each node
  40. [ 0.000000] Early memory node ranges
  41. [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000007ffffff]
  42. [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000007ffffff]
  43. [ 0.000000] random: get_random_bytes called from start_kernel+0x8c/0x474 with crng_init=0
  44. [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 32512
  45. [ 0.000000] Kernel command line: console=ttyS0,57600 rootfstype=squashfs,jffs2
  46. [ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
  47. [ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
  48. [ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
  49. [ 0.000000] Writing ErrCtl register=0002ba20
  50. [ 0.000000] Readback ErrCtl register=0002ba20
  51. [ 0.000000] Memory: 122980K/131072K available (3576K kernel code, 168K rwdata, 836K rodata, 2068K init, 208K bss, 8092K reserved, 0K cma-reserved)
  52. [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
  53. [ 0.000000] NR_IRQS: 256
  54. [ 0.000000] intc: using register map from devicetree
  55. [ 0.000000] CPU Clock: 580MHz
  56. [ 0.000000] timer_probe: no matching timers found
  57. [ 0.000000] clocksource: MIPS: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6590553264 ns
  58. [ 0.000010] sched_clock: 32 bits at 290MHz, resolution 3ns, wraps every 7405115902ns
  59. [ 0.015370] Calibrating delay loop... 385.84 BogoMIPS (lpj=1929216)
  60. [ 0.087581] pid_max: default: 32768 minimum: 301
  61. [ 0.096918] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
  62. [ 0.109877] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
  63. [ 0.129479] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
  64. [ 0.148856] futex hash table entries: 256 (order: -1, 3072 bytes)
  65. [ 0.160950] pinctrl core: initialized pinctrl subsystem
  66. [ 0.171721] NET: Registered protocol family 16
  67. [ 0.288468] mt7620-pci 10140000.pcie: Port 0 N_FTS = 1b105000
  68. [ 0.449465] mt7620-pci 10140000.pcie: PCIE0 no card, disable it(RST&CLK)
  69. [ 0.462607] mt7620-pci: probe of 10140000.pcie failed with error -1
  70. [ 0.491264] mt7621_gpio 10000600.gpio: registering 32 gpios
  71. [ 0.502490] mt7621_gpio 10000600.gpio: registering 32 gpios
  72. [ 0.513616] mt7621_gpio 10000600.gpio: registering 32 gpios
  73. [ 0.528753] clocksource: Switched to clocksource MIPS
  74. [ 0.539865] NET: Registered protocol family 2
  75. [ 0.549247] TCP established hash table entries: 1024 (order: 0, 4096 bytes)
  76. [ 0.562944] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
  77. [ 0.575467] TCP: Hash tables configured (established 1024 bind 1024)
  78. [ 0.588173] UDP hash table entries: 256 (order: 0, 4096 bytes)
  79. [ 0.599637] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
  80. [ 0.612263] NET: Registered protocol family 1
  81. [ 2.648759] random: fast init done
  82. [ 3.249130] Crashlog allocated RAM at address 0x3f00000
  83. [ 3.260837] workingset: timestamp_bits=30 max_order=15 bucket_order=0
  84. [ 3.279192] squashfs: version 4.0 (2009/01/31) Phillip Lougher
  85. [ 3.290632] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
  86. [ 3.376911] do_page_fault(): sending SIGSEGV to modprobe for invalid read access from 00000000
  87. [ 3.393882] epc = 00000000 in kmodloader[400000+3000]
  88. [ 3.403794] ra = 00401619 in kmodloader[400000+3000]
  89. [ 3.414217] io scheduler noop registered
  90. [ 3.421878] io scheduler deadline registered (default)
  91. [ 3.432783] Serial: 8250/16550 driver, 3 ports, IRQ sharing disabled
  92. [ 3.446414] console [ttyS0] disabled
  93. [ 3.453436] 10000c00.uartlite: ttyS0 at MMIO 0x10000c00 (irq = 28, base_baud = 2500000) is a 16550A
  94. [ 3.471265] console [ttyS0] enabled
  95. [ 3.471265] console [ttyS0] enabled
  96. [ 3.484996] bootconsole [early0] disabled
  97. [ 3.484996] bootconsole [early0] disabled
  98. [ 3.501342] cacheinfo: Failed to find cpu0 device node
  99. [ 3.511542] cacheinfo: Unable to detect cache hierarchy for CPU 0
  100. [ 3.524336] spi-mt7621 10000b00.spi: sys_freq: 193333333
  101. [ 3.539320] m25p80 spi0.0: mx25l12805d (16384 Kbytes)
  102. [ 3.549418] 4 fixed-partitions partitions found on MTD device spi0.0
  103. [ 3.562003] Creating 4 MTD partitions on "spi0.0":
  104. [ 3.571500] 0x000000000000-0x000000030000 : "bootloader"
  105. [ 3.582941] 0x000000030000-0x000000040000 : "config"
  106. [ 3.593682] 0x000000040000-0x000000050000 : "factory"
  107. [ 3.604582] 0x000000050000-0x000001000000 : "firmware"
  108. [ 3.677225] 2 uimage-fw partitions found on MTD device firmware
  109. [ 3.688989] 0x000000050000-0x000000185472 : "kernel"
  110. [ 3.699709] 0x000000185472-0x000001000000 : "rootfs"
  111. [ 3.710393] mtd: device 5 (rootfs) set to be root filesystem
  112. [ 3.723082] 1 squashfs-split partitions found on MTD device rootfs
  113. [ 3.735394] 0x000000470000-0x000001000000 : "rootfs_data"
  114. [ 3.747714] libphy: Fixed MDIO Bus: probed
  115. [ 3.766726] rt3050-esw 10110000.esw: link changed 0x00
  116. [ 3.778543] mtk_soc_eth 10100000.ethernet eth0: mediatek frame engine at 0xb0100000, irq 5
  117. [ 3.796730] NET: Registered protocol family 10
  118. [ 3.809605] Segment Routing with IPv6
  119. [ 3.816969] NET: Registered protocol family 17
  120. [ 3.825874] 8021q: 802.1Q VLAN Support v1.8
  121. [ 3.847689] Freeing unused kernel memory: 2068K
  122. [ 3.856685] This architecture does not have kernel memory protection.
  123. [ 3.883995] init: Console is alive
  124. [ 3.891164] init: - watchdog -
  125. [ 3.921892] kmodloader: loading kernel modules from /etc/modules-boot.d/*
  126. [ 3.946880] usbcore: registered new interface driver usbfs
  127. [ 3.957906] usbcore: registered new interface driver hub
  128. [ 3.968556] usbcore: registered new device driver usb
  129. [ 3.984645] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
  130. [ 3.999475] ehci-platform: EHCI generic platform driver
  131. [ 4.020169] phy phy-10120000.usbphy.0: remote usb device wakeup disabled
  132. [ 4.033449] phy phy-10120000.usbphy.0: UTMI 16bit 30MHz
  133. [ 4.043818] ehci-platform 101c0000.ehci: EHCI Host Controller
  134. [ 4.055240] ehci-platform 101c0000.ehci: new USB bus registered, assigned bus number 1
  135. [ 4.071051] ehci-platform 101c0000.ehci: irq 26, io mem 0x101c0000
  136. [ 4.108795] ehci-platform 101c0000.ehci: USB 2.0 started, EHCI 1.00
  137. [ 4.122230] hub 1-0:1.0: USB hub found
  138. [ 4.130135] hub 1-0:1.0: 1 port detected
  139. [ 4.141297] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
  140. [ 4.155280] ohci-platform: OHCI generic platform driver
  141. [ 4.165959] ohci-platform 101c1000.ohci: Generic Platform OHCI controller
  142. [ 4.179489] ohci-platform 101c1000.ohci: new USB bus registered, assigned bus number 2
  143. [ 4.195275] ohci-platform 101c1000.ohci: irq 26, io mem 0x101c1000
  144. [ 4.273721] hub 2-0:1.0: USB hub found
  145. [ 4.281692] hub 2-0:1.0: 1 port detected
  146. [ 4.295122] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
  147. [ 4.319988] init: - preinit -
  148. /etc/preinit: /etc/diag.sh: line 1: ����h: not found
  149. [ 4.479962] rt3050-esw 10110000.esw: link changed 0x00
  150. Press the [f] key and hit [enter] to enter failsafe mode
  151. Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
  152. 4
  153. [ 5.582439] procd: Change state 0 -> 1
  154. [ 5.591565] procd: - early -
  155. [ 5.597355] procd: Watchdog handover: fd=3
  156. [ 5.609373] procd: - watchdog -
  157. [ 5.615674] procd: Set watchdog timeout: 30s
  158. [ 5.624305] procd: Ping
  159. [ 5.629325] procd: Opened watchdog with timeout 30s
  160. open: No such file or directory
  161. open: No such file or directory
  162. open: No such file or directory
  163. [ 8.524852] rt3050-esw 10110000.esw: link changed 0x04
  164. open: No such file or directory
  165. open: No such file or directory
  166. open: No such file or directory
  167. open: No such file or directory
Advertisement
Add Comment
Please, Sign In to add comment
Public Pastes
We use cookies for various purposes including analytics. By continuing to use Pastebin, you agree to our use of cookies as described in the Cookies Policy.  OK, I Understand
Not a member of Pastebin yet?
Sign Up, it unlocks many cool features!