Advertisement
Not a member of Pastebin yet?
Sign Up,
it unlocks many cool features!
- smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.4.0-74-generic] (local build)
- Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
- === START OF INFORMATION SECTION ===
- Model Family: Toshiba P300
- Device Model: TOSHIBA HDWD110
- Serial Number: 87BYD4ZFS
- LU WWN Device Id: 5 000039 fd0db73ea
- Firmware Version: MS2OA8J0
- User Capacity: 1.000.204.886.016 bytes [1,00 TB]
- Sector Sizes: 512 bytes logical, 4096 bytes physical
- Rotation Rate: 7200 rpm
- Form Factor: 3.5 inches
- Device is: In smartctl database [for details use: -P show]
- ATA Version is: ATA8-ACS T13/1699-D revision 4
- SATA Version is: SATA 3.0, 6.0 Gb/s (current: 3.0 Gb/s)
- Local Time is: Wed Jun 9 09:07:16 2021 CEST
- SMART support is: Available - device has SMART capability.
- SMART support is: Enabled
- AAM feature is: Unavailable
- APM feature is: Disabled
- Rd look-ahead is: Enabled
- Write cache is: Enabled
- DSN feature is: Unavailable
- ATA Security is: Disabled, frozen [SEC2]
- === START OF READ SMART DATA SECTION ===
- SMART overall-health self-assessment test result: PASSED
- General SMART Values:
- Offline data collection status: (0x84) Offline data collection activity
- was suspended by an interrupting command from host.
- Auto Offline Data Collection: Enabled.
- Self-test execution status: ( 0) The previous self-test routine completed
- without error or no self-test has ever
- been run.
- Total time to complete Offline
- data collection: ( 7070) seconds.
- Offline data collection
- capabilities: (0x5b) SMART execute Offline immediate.
- Auto Offline data collection on/off support.
- Suspend Offline collection upon new
- command.
- Offline surface scan supported.
- Self-test supported.
- No Conveyance Self-test supported.
- Selective Self-test supported.
- SMART capabilities: (0x0003) Saves SMART data before entering
- power-saving mode.
- Supports SMART auto save timer.
- Error logging capability: (0x01) Error logging supported.
- General Purpose Logging supported.
- Short self-test routine
- recommended polling time: ( 1) minutes.
- Extended self-test routine
- recommended polling time: ( 118) minutes.
- SCT capabilities: (0x003d) SCT Status supported.
- SCT Error Recovery Control supported.
- SCT Feature Control supported.
- SCT Data Table supported.
- SMART Attributes Data Structure revision number: 16
- Vendor Specific SMART Attributes with Thresholds:
- ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE
- 1 Raw_Read_Error_Rate PO-R-- 100 100 016 - 0
- 2 Throughput_Performance P-S--- 142 142 054 - 71
- 3 Spin_Up_Time POS--- 121 121 024 - 190 (Average 189)
- 4 Start_Stop_Count -O--C- 100 100 000 - 1700
- 5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0
- 7 Seek_Error_Rate PO-R-- 100 100 067 - 0
- 8 Seek_Time_Performance P-S--- 118 118 020 - 33
- 9 Power_On_Hours -O--C- 100 100 000 - 6404
- 10 Spin_Retry_Count PO--C- 100 100 060 - 0
- 12 Power_Cycle_Count -O--CK 100 100 000 - 1429
- 192 Power-Off_Retract_Count -O--CK 099 099 000 - 1701
- 193 Load_Cycle_Count -O--C- 099 099 000 - 1701
- 194 Temperature_Celsius -O---- 187 187 000 - 32 (Min/Max 14/43)
- 196 Reallocated_Event_Count -O--CK 100 100 000 - 0
- 197 Current_Pending_Sector -O---K 100 100 000 - 0
- 198 Offline_Uncorrectable ---R-- 100 100 000 - 0
- 199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 1142
- ||||||_ K auto-keep
- |||||__ C event count
- ||||___ R error rate
- |||____ S speed/performance
- ||_____ O updated online
- |______ P prefailure warning
- General Purpose Log Directory Version 1
- SMART Log Directory Version 1 [multi-sector log support]
- Address Access R/W Size Description
- 0x00 GPL,SL R/O 1 Log Directory
- 0x01 SL R/O 1 Summary SMART error log
- 0x03 GPL R/O 1 Ext. Comprehensive SMART error log
- 0x04 GPL R/O 7 Device Statistics log
- 0x06 SL R/O 1 SMART self-test log
- 0x07 GPL R/O 1 Extended self-test log
- 0x08 GPL R/O 2 Power Conditions log
- 0x09 SL R/W 1 Selective self-test log
- 0x10 GPL R/O 1 NCQ Command Error log
- 0x11 GPL R/O 1 SATA Phy Event Counters log
- 0x20 GPL R/O 1 Streaming performance log [OBS-8]
- 0x21 GPL R/O 1 Write stream error log
- 0x22 GPL R/O 1 Read stream error log
- 0x80-0x9f GPL,SL R/W 16 Host vendor specific log
- 0xe0 GPL,SL R/W 1 SCT Command/Status
- 0xe1 GPL,SL R/W 1 SCT Data Transfer
- SMART Extended Comprehensive Error Log Version: 1 (1 sectors)
- Device Error Count: 1142 (device log contains only the most recent 4 errors)
- CR = Command Register
- FEATR = Features Register
- COUNT = Count (was: Sector Count) Register
- LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8
- LH = LBA High (was: Cylinder High) Register ] LBA
- LM = LBA Mid (was: Cylinder Low) Register ] Register
- LL = LBA Low (was: Sector Number) Register ]
- DV = Device (was: Device/Head) Register
- DC = Device Control Register
- ER = Error register
- ST = Status register
- Powered_Up_Time is measured from power on, and printed as
- DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
- SS=sec, and sss=millisec. It "wraps" after 49.710 days.
- Error 1142 [1] occurred at disk power-on lifetime: 6036 hours (251 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 84 -- 51 00 01 00 00 17 66 00 07 07 00 Error: ICRC, ABRT at LBA = 0x17660007 = 392560647
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 00 08 00 38 00 00 17 66 00 00 40 00 02:25:02.733 WRITE FPDMA QUEUED
- ef 00 10 00 02 00 00 00 00 00 00 a0 00 02:25:02.732 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 00 00 00 00 00 e0 00 02:25:02.732 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 00 00 00 00 00 a0 00 02:25:02.732 IDENTIFY DEVICE
- e3 00 00 00 00 00 00 00 00 00 00 a0 00 02:25:02.732 IDLE
- Error 1141 [0] occurred at disk power-on lifetime: 6036 hours (251 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 84 -- 51 00 01 00 00 17 66 00 07 07 00 Error: ICRC, ABRT at LBA = 0x17660007 = 392560647
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 00 08 00 10 00 00 17 66 00 00 40 00 02:25:02.383 WRITE FPDMA QUEUED
- ea 00 00 00 00 00 00 00 00 00 00 a0 00 02:25:02.362 FLUSH CACHE EXT
- 61 00 08 00 f8 00 00 1d 2a 00 00 40 00 02:25:02.342 WRITE FPDMA QUEUED
- 60 00 08 00 40 00 00 53 fe 61 f0 40 00 02:25:02.342 READ FPDMA QUEUED
- ef 00 10 00 02 00 00 00 00 00 00 a0 00 02:25:02.342 SET FEATURES [Enable SATA feature]
- Error 1140 [3] occurred at disk power-on lifetime: 6036 hours (251 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 84 -- 51 00 d8 00 00 1d 2a 00 18 0d 00 Error: ICRC, ABRT at LBA = 0x1d2a0018 = 489291800
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 60 00 08 00 e0 00 00 53 fe 61 f0 40 00 02:25:02.011 READ FPDMA QUEUED
- 61 00 e8 00 d8 00 00 1d 2a 00 08 40 00 02:25:02.011 WRITE FPDMA QUEUED
- ef 00 10 00 02 00 00 00 00 00 00 a0 00 02:25:02.011 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 00 00 00 00 00 e0 00 02:25:02.011 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 00 00 00 00 00 a0 00 02:25:02.010 IDENTIFY DEVICE
- Error 1139 [2] occurred at disk power-on lifetime: 6036 hours (251 days + 12 hours)
- When the command that caused the error occurred, the device was active or idle.
- After command completion occurred, registers were:
- ER -- ST COUNT LBA_48 LH LM LL DV DC
- -- -- -- == -- == == == -- -- -- -- --
- 84 -- 51 00 d8 00 00 1d 2a 00 18 0d 00 Error: ICRC, ABRT at LBA = 0x1d2a0018 = 489291800
- Commands leading to the command that caused the error were:
- CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name
- -- == -- == -- == == == -- -- -- -- -- --------------- --------------------
- 61 00 e8 00 70 00 00 1d 2a 00 08 40 00 02:25:01.677 WRITE FPDMA QUEUED
- 60 00 08 00 68 00 00 53 fe 61 f0 40 00 02:25:01.677 READ FPDMA QUEUED
- ef 00 10 00 02 00 00 00 00 00 00 a0 00 02:25:01.676 SET FEATURES [Enable SATA feature]
- 27 00 00 00 00 00 00 00 00 00 00 e0 00 02:25:01.676 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
- ec 00 00 00 00 00 00 00 00 00 00 a0 00 02:25:01.676 IDENTIFY DEVICE
- SMART Extended Self-test Log Version: 1 (1 sectors)
- Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error
- # 1 Short offline Completed without error 00% 6025 -
- # 2 Short offline Completed without error 00% 4058 -
- # 3 Extended offline Completed without error 00% 4052 -
- # 4 Short offline Completed without error 00% 4026 -
- # 5 Short offline Completed without error 00% 4018 -
- # 6 Short offline Completed without error 00% 4009 -
- # 7 Short offline Completed without error 00% 4001 -
- # 8 Short offline Completed without error 00% 3993 -
- # 9 Short offline Completed without error 00% 3985 -
- #10 Short offline Completed without error 00% 3968 -
- #11 Short offline Completed without error 00% 3959 -
- #12 Short offline Completed without error 00% 3951 -
- #13 Short offline Completed without error 00% 3940 -
- #14 Extended offline Completed without error 00% 3920 -
- #15 Short offline Completed without error 00% 3874 -
- #16 Short offline Completed without error 00% 3867 -
- #17 Short offline Completed without error 00% 3858 -
- #18 Short offline Completed without error 00% 3831 -
- #19 Short offline Completed without error 00% 3824 -
- SMART Selective self-test log data structure revision number 1
- SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
- 1 0 0 Not_testing
- 2 0 0 Not_testing
- 3 0 0 Not_testing
- 4 0 0 Not_testing
- 5 0 0 Not_testing
- Selective self-test flags (0x0):
- After scanning selected spans, do NOT read-scan remainder of disk.
- If Selective self-test is pending on power-up, resume after 0 minute delay.
- SCT Status Version: 3
- SCT Version (vendor specific): 256 (0x0100)
- Device State: SMART Off-line Data Collection executing in background (4)
- Current Temperature: 32 Celsius
- Power Cycle Min/Max Temperature: 25/32 Celsius
- Lifetime Min/Max Temperature: 14/43 Celsius
- Under/Over Temperature Limit Count: 0/0
- SCT Temperature History Version: 2
- Temperature Sampling Period: 1 minute
- Temperature Logging Interval: 1 minute
- Min/Max recommended Temperature: 0/60 Celsius
- Min/Max Temperature Limit: -40/70 Celsius
- Temperature History Size (Index): 128 (21)
- Index Estimated Time Temperature Celsius
- 22 2021-06-09 07:00 34 ***************
- ... ..( 21 skipped). .. ***************
- 44 2021-06-09 07:22 34 ***************
- 45 2021-06-09 07:23 33 **************
- 46 2021-06-09 07:24 33 **************
- 47 2021-06-09 07:25 34 ***************
- 48 2021-06-09 07:26 34 ***************
- 49 2021-06-09 07:27 33 **************
- 50 2021-06-09 07:28 33 **************
- 51 2021-06-09 07:29 34 ***************
- 52 2021-06-09 07:30 34 ***************
- 53 2021-06-09 07:31 33 **************
- ... ..( 25 skipped). .. **************
- 79 2021-06-09 07:57 33 **************
- 80 2021-06-09 07:58 ? -
- 81 2021-06-09 07:59 30 ***********
- 82 2021-06-09 08:00 31 ************
- ... ..( 2 skipped). .. ************
- 85 2021-06-09 08:03 31 ************
- 86 2021-06-09 08:04 32 *************
- ... ..( 12 skipped). .. *************
- 99 2021-06-09 08:17 32 *************
- 100 2021-06-09 08:18 33 **************
- 101 2021-06-09 08:19 32 *************
- 102 2021-06-09 08:20 32 *************
- 103 2021-06-09 08:21 33 **************
- ... ..( 5 skipped). .. **************
- 109 2021-06-09 08:27 33 **************
- 110 2021-06-09 08:28 34 ***************
- ... ..( 10 skipped). .. ***************
- 121 2021-06-09 08:39 34 ***************
- 122 2021-06-09 08:40 35 ****************
- ... ..( 9 skipped). .. ****************
- 4 2021-06-09 08:50 35 ****************
- 5 2021-06-09 08:51 36 *****************
- ... ..( 3 skipped). .. *****************
- 9 2021-06-09 08:55 36 *****************
- 10 2021-06-09 08:56 ? -
- 11 2021-06-09 08:57 26 *******
- 12 2021-06-09 08:58 27 ********
- 13 2021-06-09 08:59 28 *********
- 14 2021-06-09 09:00 28 *********
- 15 2021-06-09 09:01 29 **********
- 16 2021-06-09 09:02 30 ***********
- 17 2021-06-09 09:03 30 ***********
- 18 2021-06-09 09:04 31 ************
- 19 2021-06-09 09:05 31 ************
- 20 2021-06-09 09:06 31 ************
- 21 2021-06-09 09:07 32 *************
- SCT Error Recovery Control:
- Read: Disabled
- Write: Disabled
- Device Statistics (GP Log 0x04)
- Page Offset Size Value Flags Description
- 0x01 ===== = = === == General Statistics (rev 1) ==
- 0x01 0x008 4 1429 --- Lifetime Power-On Resets
- 0x01 0x010 4 6404 --- Power-on Hours
- 0x01 0x018 6 20895367166 --- Logical Sectors Written
- 0x01 0x020 6 246174003 --- Number of Write Commands
- 0x01 0x028 6 286256902430 --- Logical Sectors Read
- 0x01 0x030 6 250324740 --- Number of Read Commands
- 0x03 ===== = = === == Rotating Media Statistics (rev 1) ==
- 0x03 0x008 4 6258 --- Spindle Motor Power-on Hours
- 0x03 0x010 4 6258 --- Head Flying Hours
- 0x03 0x018 4 1701 --- Head Load Events
- 0x03 0x020 4 0 --- Number of Reallocated Logical Sectors
- 0x03 0x028 4 6 --- Read Recovery Attempts
- 0x03 0x030 4 2 --- Number of Mechanical Start Failures
- 0x04 ===== = = === == General Errors Statistics (rev 1) ==
- 0x04 0x008 4 0 --- Number of Reported Uncorrectable Errors
- 0x04 0x010 4 91 --- Resets Between Cmd Acceptance and Completion
- 0x05 ===== = = === == Temperature Statistics (rev 1) ==
- 0x05 0x008 1 32 --- Current Temperature
- 0x05 0x010 1 34 N-- Average Short Term Temperature
- 0x05 0x018 1 32 N-- Average Long Term Temperature
- 0x05 0x020 1 43 --- Highest Temperature
- 0x05 0x028 1 14 --- Lowest Temperature
- 0x05 0x030 1 40 N-- Highest Average Short Term Temperature
- 0x05 0x038 1 24 N-- Lowest Average Short Term Temperature
- 0x05 0x040 1 38 N-- Highest Average Long Term Temperature
- 0x05 0x048 1 25 N-- Lowest Average Long Term Temperature
- 0x05 0x050 4 0 --- Time in Over-Temperature
- 0x05 0x058 1 60 --- Specified Maximum Operating Temperature
- 0x05 0x060 4 0 --- Time in Under-Temperature
- 0x05 0x068 1 0 --- Specified Minimum Operating Temperature
- 0x06 ===== = = === == Transport Statistics (rev 1) ==
- 0x06 0x008 4 13183 --- Number of Hardware Resets
- 0x06 0x010 4 9672 --- Number of ASR Events
- 0x06 0x018 4 1142 --- Number of Interface CRC Errors
- |||_ C monitored condition met
- ||__ D supports DSN
- |___ N normalized value
- SATA Phy Event Counters (GP Log 0x11)
- ID Size Value Description
- 0x0001 2 0 Command failed due to ICRC error
- 0x0002 2 0 R_ERR response for data FIS
- 0x0003 2 0 R_ERR response for device-to-host data FIS
- 0x0004 2 0 R_ERR response for host-to-device data FIS
- 0x0005 2 0 R_ERR response for non-data FIS
- 0x0006 2 0 R_ERR response for device-to-host non-data FIS
- 0x0007 2 0 R_ERR response for host-to-device non-data FIS
- 0x0009 2 6 Transition from drive PhyRdy to drive PhyNRdy
- 0x000a 2 6 Device-to-host register FISes sent due to a COMRESET
- 0x000b 2 0 CRC errors within host-to-device FIS
- 0x000d 2 0 Non-CRC errors within host-to-device FIS
Advertisement
Add Comment
Please, Sign In to add comment
Advertisement